The Bystronic Byspeed Laser provides 4400 Watts of power cuts steel up to 1”, Stainless Steel to 0.625” and Aluminum to 0.500”. Coupled with an automated pallet changing system, the Bystronic Laser produces fast, accurate parts continuously. With no tooling costs and multi-part nesting capabilities, cost effective parts can be produced in low or high volumes. BENEFITS • No tooling costs • Cost saving nesting capabilities • Reduction or elimination of secondary deburring operations • Part marking and text capabilities on steel and stainless • Automated pallet changing system reduces downtime and cost • Cost effective prototyping • On-Site Nitrogen generation • Automated jib crane (1600# capacity) BYSTRONIC BYSPEED LASER CAPACITY Sheet Width………….……….60” Sheet Length…………..…….120” ACCURACY Positioning ........................0.004” SPEED Max. Positioning ..X, Y 6,693 ipm CUTTING THICKNESS Mild Steel .....................02”-.787” Stainless .........................02”-.50” Aluminum.......................02”-.40” WWW.HIBFAB.COM LASER CUTTING
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
The Bystronic Byspeed Laser provides 4400 Watts of power cuts steel up to 1”, Stainless Steel to
0.625” and Aluminum to 0.500”. Coupled with an automated pallet changing system, the Bystronic
Laser produces fast, accurate parts continuously. With no tooling costs and multi-part nesting
capabilities, cost effective parts can be produced in low or high volumes.
BENEFITS
• No tooling costs
• Cost saving nesting capabilities
• Reduction or elimination of secondary deburring operations
• Part marking and text capabilities on steel and stainless
• Automated pallet changing system reduces downtime and cost
• Cost effective prototyping
• On-Site Nitrogen generation
• Automated jib crane (1600# capacity)
BYSTRONIC BYSPEED LASERCAPACITY
Sheet Width………….……….60”Sheet Length…………..…….120”
ACCURACYPositioning........................0.004”
SPEEDMax. Positioning ..X, Y 6,693 ipm
CUTTING THICKNESSMild Steel.....................02”-.787”Stainless .........................02”-.50”Aluminum.......................02”-.40”
WWW.HIBFAB.COM
LASER CUTTING
Related Documents
