Page 1
Pages
• Multi-Mat® Concept
• News
• 1st time user’s guide
• ISO / ASA inserts designation
• Machining guide
• Technical Formulas
• FAQ
• Turning
• Aluminum Turning
• Parting
• Milling
• Aluminum Milling
• Drilling
• Solid Mill
• Material reference list
• Milling Inserts reference table
• Contact list of subsidiaries
�
List of contents
2
3
4
6
8
9
10
11
113
123
133
215
221
227
239
246
248
Page 2
IMAGINE...Your cutting tools stock reduction
IMAGINE...Having the right tool at the right time all the time
IMAGINE...Your savings of production costs
Focused range of Multi Material inserts
Each insert performs on all materials as good as, or better than the dedicated insert of the competition
Top Swiss quality
ALL YOU NEED IS ONE GRADE...THE LAMINA GRADE
IMAGINE...
Steel StainlessSteel
CastIron
High TempAlloys
Aluminum &Non-Ferrous Alloys
The Lamina Multi-Mat ConceptTM
�
Page 3
�
The Lamina Multi-Mat® Concept in more applications
New Inserts More Geometries
MILLING Our top quality Milling inserts from Lamina Multi-Mat® LT-30 Grade and tight tolerance Milling bodies.
TURNING Our top quality Turning inserts from Lamina Multi-Mat® LT-10 grade.
PARTING Our revolutionary Parting line is
available for ordering.
Aluminum Our Aluminum line for Milling and Turning applications with LT-05 Grade.
DRILLING Our Drilling line of inserts with
Lamina Multi-Mat® LT-30 Grade.
MULTI-MAT , LAMINA ALTERNATIVETODAY, TOMORROW, ALWAYS !
TM
News & updates
�
Page 4
First time Lamina user Machining guide
�
As a new user of the revolutionary Lamina Multi-Mat® (Multi Material) inserts, we would like to present to you a short machining guide to insure your satisfaction from our product. The cutting data specified in this guide should be considered as a good starting point. Each insert is able to perform in a wider range of cutting conditions. For complete cutting data please see our catalog or our online catalog at our web site www.lamina-tech.ch
1. Select the material group to be machined. In case of doubt, refer to material reference pages in the catalog. 2. Check machining recommendations with or without coolant. 3. Select feed as a function of the tool lead angle. 4. The cutting speed is indicated in the right-hand column.
Milling
Milling tips • The cutting conditions are Lamina
Technologies guidelines for optimal machining, however our inserts can work in a wider range of cutting conditions to meet special machining needs.
• It is always recommended to machine in ‘ Climb Milling’ way.• For Stainless Steel, work over the minimum speed, as machining Stainless Steel at low speeds causes material sticking.• Coolant recommendations: Use coolant with materials from groups 11, 12. Do not use coolant with materials from groups 1, 2, 3, 4, 7, 9, 10. Use coolant with materials from groups 5, 6, 8 -depending on the application.• Do not use coolant if it is not efficient enough. • In any case of vibrations, we recommend reducing cutting speed and/ or Depth Of Cut, and increasing feed rate. Also always the Cutter’s shank should be as short as possible and as wide as possible. • Always check clamping stability.• If chips are turning with the cutter, increase cutting speed, feed rate or both.• If the work piece warms up, increase feed rate.• Always verify that the tool holder is in good condition (not damaged).
• The above values are indicated as functions of the cutting edge angle, i.e. kappa 45° or 90°. The high feed relates to cutting inserts for surfacing, attack angles 45° and 75°. The low feed relates to cutting inserts for surfacing, trimming angle 90°. The above-mentioned cutting conditions are indicated for each material group and the respective hardness.
�
Basic cutting conditions for first time user - Milling
Nickel Based Alloys
Titanium BasedAlloys
Material Group Group Material Examples BHn Coolantfeed per tooth
o oInitialSFMNo
hardness
45 90
1018 / 1020 150 1000
Low Carbon Steel 1 1026 / 12414 180 0.012 875
210 750
8620 180 750
Alloy Steel 24140 230
0.010700
4340 280 550
320 360
ASTM A353 220 425
High Alloy Steel 3280
0.009350
H13 320 325
350 280
4303 / 304 210
0.010 0.007 700304 L to 250
Austenitic5 316 / 316 L
230
No
0.009 0.006 600Stainless Steel to 270
6316 Ti
0.009 0.005 300630 (F16PH)
Ferritic Stainless7 430 / 439 / 444 No 0.010 0.007 650
Steel
Martensitic8 410 / 420 No
Stainless Steel
Class 20140
750
Grey Cast Iron 9 Class 30to 250
No 0.012 0.009 700
Class 40 600
60-40-18 2100.006
570
Nodular Cast Iron 10 80-55-06 260 Yes 0.010 450
1000-70-03 310 400
Inconel 625 100
11 Inconel 718 -------- Yes 0.009 0.006 100
Hastelloy C 170
12TiAl 6 V4
-------- Yes 0.009 0.006150
T40 140
No
6500.0070.010
Yes
Yes
0.009
0.007
0.006
13
----
----
----
Si < 4%4% < Si < 9%
Si >9%
0.10 0.006
0.007
0.010
0.005
0.006
2400
1350
750
1045
52100
230to 270
200to 300
200to 300
No
Yes
Aluminium
Aluminium 14
Yes
YesFor Alu group 14, please use inserts grade LT-10
For Alu group 13, please use our Alu line grade LT-05
Page 5
• ThecuttingconditionsareLaminaTechnologiesguidelinesforoptimalmachining,howeverourinsertscanworkinawiderrangeofcuttingconditionstomeetspecialmachiningneeds.
• IfworkingaccordingtoourrecommendedcuttingconditionsA-maxshouldberespected.
• ForStainlessSteel,workovertheminimumspeed,asmachiningStainlessSteelatlowspeedscausesmaterialsticking.
• Coolantrecommendations:
Usecoolantwithmaterialsfromgroups6,7,8,9,10,11,12.
Donotusecoolantwithmaterialsfromgroups1,2,4.Use
coolantwithmaterialsfromgroups3,5-dependingontheapplication.
• Alwaysverifythatthetoolholderandshimareingoodcondi-tion(notdamaged).
• Ifcuttingchipsaretoolong,werecommendincreasingfeedrate.
• Ifcuttingchipsarenotcontrolled(varyinshapeandsize),werecommendincreasingfeedrateandreducingdepthofcut.
• Forinternalboringoperation,thetoolholdershouldbeasshortaspossibleandshankaswideaspossible.
• Inanycaseofvibrations,werecommendreducingcuttingspeed,andincreasingfeedrate.
• Instronginterruptedcut,feedrateshouldbereduced.
�
�. Select the material group to be machined. In case of doubt, consult material reference pages in the catalog.�. Select the insert nose radius. �. Select cutting depth and feed according to radius. �. The cutting speed is indicated in the right-hand column.
Turning
Turning tips
�
Basic cutting conditions for first time user - Turning
Nickel Based Alloys
Titanium BasedAlloys
Material Group Group Material Examples BHnNose radius 1/64” Initial
SFMNohardness
d.o.c(04)
f
Nose radius 2/64”
d.o.c(08)
f
Nose radius 3/64”
d.o.c(12)
f1018 / 1020 150 1300
Low Carbon Steel 1 1026 / 12414 1800.015
to 0.060
975
210 825
8620 180 1000
Alloy Steel 24140 230 800
4340 280 675
320 550
ASTM A353 220 525
High Alloy Steel 3280 400
H13 320 350
350 300
4303 / 304 210
700304 L to 250
Austenitic5 316 / 316 L
230600
Stainless Steel to 270
6316 Ti
350630 (F16PH)
Ferritic Stainless7 430 / 439 / 444 600
Steel
Martensitic8 410 / 420
Stainless Steel
Class 20140
750
Grey Cast Iron 9 Class 30to 250
700
Class 40 625
60-40-18 210 625
Nodular Cast Iron 10 80-55-06 260 550
1000-70-03 310 450
Inconel 625 100
11 Inconel 718 -------- 115
Hastelloy C 200
12TiAl 6 V4
--------165
T40 125
450600
0.004to
0.006
0.015to
0.060
0.004to
0.005
0.008to
0.060
0.003to
0.006
0.008to
0.060
0.004to
0.005
0.009to
0.047
0.004to
0.005
0.015 to 0.060
0.005 to0.006
0.015 to 0.060
0.004 to0.006
0.015 to 0.050
0.005
0.015 to 0.060
0.005 to0.006
Aluminium13
----
----
----
Si < 4%4% < Si < 9%
Si >9%
2400
1350
750
1045
52100
230to 270
200to 300
200to 300
Aluminium
Aluminium 14
0.015to
0.0600.004
0.030to
0.125
0.009to
0.011
0.030to
0.125
0.009to
0.011
0.030to
0.125
0.040to
0.200
0.012to
0.020
0.040to
0.157
0.012to
0.018
0.008to
0.010
0.013to
0.018
0.040to
0.125
0.030to
0.187
0.007to
0.014
0.012to
0.024
0.030to
0.200
0.030to
0.125
0.007to
0.012
0.012to
0.020
0.030to
0.200
0.030to
0.125
0.007to
0.011
0.012to
0.017
0.030to
0.125
0.015 to 0.060
0.005 to0.006
0.030 to 0.125
0.007 to0.012
0.030 to 0.125
0.007 to0.010
0.030 to 0.125
0.030 to 0.125
0.009 to0.011
0.030 to 0.125
0.009 to0.011
0.040 to 0.200
0.012 to0.020
0.040 to 0.157
0.011 to0.018
0.007 to0.010
0.011 to0.018
0.040 to 0.125
0.030 to 0.157
0.012 to0.018
0.030 to 0.157
0.012 to0.018
0.030 to 0.125
0.007 to0.012
0.030 to 0.157
0.012 to0.018
0.008 to 0.200
0.006 to0.020
0.009 to 0.047
0.004 to0.006
0.008 to 0.200
0.005 to0.010
0.020-0.200 0.003-0.009 0.020-0.200 0.007-0.016 0.020-0.200 0.009-0.024
For Alu group 14, please use inserts grade LT-10
For Alu group 13, please use our Alu line grade LT-05
Page 6
12 04 AF T N
4 3 AF T N
A F45° A A
60° D B
75° E C
85° F D
90° P E
Other angle Z F
3°
5°
7°
15°
20°
25°
G
N
P
Z
30°
0°
11°
Other angle
F
E
T
S
/ Corner configuration
N
L
R
Cutting direction
Edge preparation
METRIC
INCH S E K T
S E K T1 2 3 4
A B C D
H K L
O P R
S T V W
E
75°
86°
35°
85° 55°80°
80°
M
55°
82°
D M S
A ± 0.025 ± 0.005 ± 0.025
C ± 0.025 ± 0.013 ± 0.025
E ± 0.025 ± 0.025 ± 0.025
F ± 0.013 ± 0.005 ± 0.025
G ± 0.025 ± 0.025 ± 0.013
H ± 0.013 ± 0.013 ± 0.025
D M S
J ± 0.05a ± 0.15 ± 0.005 ± 0.025
K ± 0.05a ± 0.15 ± 0.013 ± 0.025
L ± 0.05a ± 0.15 ± 0.025 ± 0.025
M ± 0.05a ± 0.15
± 0.08a ± 0.20 ± 0.130
N ± 0.05a ± 0.15
± 0.08a ± 0.20 ± 0.025
U ± 0.08a ± 0.25
± 0.13a ± 0.38 ± 0.130
ISO / ASA insert designation
�
Page 7
�
�
12 04 AF T N
4 3 AF T N
A F45° A A
60° D B
75° E C
85° F D
90° P E
Other angle Z F
3°
5°
7°
15°
20°
25°
G
N
P
Z
30°
0°
11°
Other angle
F
E
T
S
/ Corner configuration
N
L
R
Cutting direction
Edge preparation
METRIC
INCH S E K T
S E K T1 2 3 4
A B C D
H K L
O P R
S T V W
E
75°
86°
35°
85° 55°80°
80°
M
55°
82°
D M S
A ± 0.025 ± 0.005 ± 0.025
C ± 0.025 ± 0.013 ± 0.025
E ± 0.025 ± 0.025 ± 0.025
F ± 0.013 ± 0.005 ± 0.025
G ± 0.025 ± 0.025 ± 0.013
H ± 0.013 ± 0.013 ± 0.025
D M S
J ± 0.05a ± 0.15 ± 0.005 ± 0.025
K ± 0.05a ± 0.15 ± 0.013 ± 0.025
L ± 0.05a ± 0.15 ± 0.025 ± 0.025
M ± 0.05a ± 0.15
± 0.08a ± 0.20 ± 0.130
N ± 0.05a ± 0.15
± 0.08a ± 0.20 ± 0.025
U ± 0.08a ± 0.25
± 0.13a ± 0.38 ± 0.130
Page 8
��
P geometry inserts (CNMP, TNMP, WNMP) are not recommended when machining with interrupted cut.
In order to assist you, our customer, to obtain the best productivity using our cutting tools, we enclose some relevant comments and tips. Each comment is symbolized by an icon and the relevant icons appear for each insert.
We hope that you find these comments and tips helpful.
To increase productivity it is recommended to increase feed (f) and respect cutting speed.
Appropriate for boring operation.
To increase machining productivity, it is recommended to increase speed (Vc) while respecting chip size calculation (Amax).
Wiper inserts will give better surface quality at higher feeds, only whenused on a stable machine with rigid clamping (no vibrations).
It is important to verify and respect Amax (see column 9 in the cutting data tables), which is the maximum chip section . Feed x d.o.c must be lower than the number noted as Amax.
In machining Exotic materials, it is important to verify cutting conditions of the specific insert.
In machining Stainless Steel or Exotic materials, P geometry inserts (CNMP, TNMP, WNMP), are recommended as first choice.
In machining Stainless Steel, please verify and respect the cutting speed recommended for the insert, as there is a tendency to machine at speeds that are too low.
When machining materials from groups 1, 2, 4 it is recommended not to use coolant. When machining material from groups 3, 5 – usingcoolant or not, depends on the application. When machining material from groups 6, 7, 8, 9, 10, 11, 12 it is recommended to use coolant.
Machining Recommendation Guide
Page 9
�
TURNING MILLING
Technical Formulas
�
SymbolDescriptionUnit
Spindlespeed
Cuttingspeed
Machiningdiameter
Feedperrevolution
Depthofcut
Insertnoseradius
Roughnessavarage
Rootmeansquared
SymbolDescriptionUnit
rpm
sfm
D
fpr
doc
r
Ra
RMS
rev/min
ft/min
inches
inches
inches
inches
uinches
uinches
Spindlespeed
Cuttingspeed
Machiningdiameter
Feedpertooth
feedrate
depthofcut
widthofcut
rpm
sfm
D
fpt
ipm
z
doc
woc
rev/min
ft/min
inches
inches
inches
inches
inches
Actualnumberofteethforcalcula-tionfeedrateoffeedperrevolution.
Cuttingspeed,sfm
surfaceft/min0.262xDxrpm
Cuttingtime
fpr
8xr()Rax1.11
metalremovelrate,
cubicinchesin/min3
SurfacefinishingRMS
uinches
Cuttingspeed,sfm
surfaceft/min
rpmxzxfptfeedrate,ipminches/min
ipm
rpmxz
docxwocxipm
spindlespeed,rpm
rev/min
spindlespeed,rpm
rev/min
0.262xDxrpm
3.82xsfm
D
3.82xsfm
D
loc
fprxrpm
2
/3
docxfprxsfmx12
SurfacefinishingRa**
uinches
feedpertoothfpt
inches
metalremvalrate,
cubicinchesin/min3
Page 10
�0
Frequently Asked Questions
�0
Is it true that Lamina inserts can be used with any type of working material?Lamina inserts have been tested in countless applica-tions around the world, and are suitable for practically any type of Turning or Milling metal cutting operation. It is noteworthy that, while Lamina inserts will work in Aluminum production jobs in Aluminum frequently require tailored designed chip-control optimization.Please refer to Lamina Alu-Line.
What speeds and feeds should Lamina inserts be run at?In this catalog, specific recommendations are provided for each individual insert, indicating the speeds and feeds that are required for most of the material groups. In order to achieve the maximum advantage from Lamina’s grade technology it is important to always run the inserts according to the recommended conditions. In general, the best results are normally achieved at the high range of the recommended cutting speeds.
What can we expect regarding the quality and consistency of Lamina inserts?Due to Lamina’s unique production methods and Quality Control procedures, you can expect inserts with much higher accuracy and consistency than you have been accustomed up to now: insert to insert, box to box and batch to batch. This advantage improves the unatten-ded operation of your machines.
What percentage of my tooling requirements can Lamina supply?In most regular shops Lamina’s insert program should cover about 80% of all inserts needed for CNC machi-nes from 20 Hp and down. The insert program covers a full range of standard turning and milling operations from Semi-Roughing to Super-Finishing. Will the performance of Lamina grades be better than the specialized and dedicated grades available from the market?Lamina has extensive know-how in sub-micron powder technology as well as in state of the art PVD coating. This know –how combined with unique chip breaker geometry and the into depth application understanding, enabled Lamina to offer the Multi - Mat Concept; a simple concept of using one insert to work on many materials. The same insert can be used on the next job and the job after and so on, replacing the hundreds of specialized and confusing insert choices that are being used.
In machine shops that run Lamina inserts, what do they find as the biggest benefits?• Time saving- ability to always have the right insert available for any job. This reduces the number of setups and idle time.• Cost saving- 80% reduction in insert inventory, orde-ring and stocking cost.
Are Lamina inserts coated the same as other PVD inserts?Lamina’s state of the art PVD coating has significant differences compared to other suppliers. Our coating process produces thicker and stronger coating – with better adhesion, higher performance and longer tool life.
What about turning tool holders and boring bars?Lamina’s ANSI / ISO standard turning inserts are designed to fit all industrial standard turning tools and boring bars, using the tool holders you have in your stock.
In turning, when should I use the _NMP style inserts rather than the _NMG style inserts?Most customers find that High-Positive _NMP style inserts (CNMP, TNMP and WNMP) deliver the best results in sticky materials, such as 316 Stainless Steel, Inconel, and Titanium (high heat and corrosion resistant properties). This is achieved by our unique combination of our grades and geometry.
How does the 4 corners Alu-line perform in Low Silicon Aluminum?Our Alu-line insert’s geometry is specially designed for Aluminum with low Silicon content, creating chips that break instead of curl. The inserts are also coated and treated to reduce friction achieving unbeatable perfor-mance and tool life.
What is special about your Solid-Mill line?Our know-how of inserts making was applied to our Solid Mills line. Our mills generate less friction and heat and therefore give better cut and longer tool life.
When should I use Star line?Star line inserts are a good cost for positive turning inserts. Our Star Line inserts offer 3 cutting corners for the VBMT, CCMT, DCMT, and TCMT shapes instead of 2. Moreover, all the inserts can be mounted on the same tool holder.
Page 11
Turning LT - 10 Multi-Mat TurningLT - 05 Aluminium
MULTI-MAT TURNING INSERTS®
®
��
CCMT
CNMA
CNMG
CNMM
CNMP
DCMT
DNMG
KNUX
RCMT
SCMT
SNMG
TCMT
TNMG
TNMP
TNUX
TPMR
VBMT
VCMT
VNMG
WNMG
WNMP
STAR
ALU- TurningParting
Page 12
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
C C M T
Insert Designation Grade l s r Catalog Nr. Page*
CCMT 2(1.5)1 NN
CCMT 3(2.5)1 NN
CCMT 3(2.5)2 NN
CCMT 3(2.5)2 WM
CCMT 431 NN
CCMT 432 NN
CCMT 433 NN
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
T0000055
T0000056
T0000117
T0000057
T0001456
T0001457
T0001776
13
14
15
16
17
18
19
1/4" 3/32" 1/64"
3/8" 5/32" 1/64"
3/8" 5/32" 1/32"
3/8" 5/32" 1/32"
1/2" 3/16" 1/64"
1/2" 3/16" 1/32"
1/2" 3/16" 3/64"
Shape Clearance Angle Tolerance Insert Type80° Diamond 7° Positive
rakeScrew Down ClampingSingle Sided
d ± 0.05 m ± 0.08s ± 0.13
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
��
80° Diamond shape inserts, with positive chip breaker geometry. Very popular and useful for Boring even of small diameters, Facing and external turning operations.
CCMT 3(2.5)1 NN
CCMT 3(2.5)1 NN
CCMT 3(2.5)2 NN
CCMT 3(2.5)2 WM
CCMT 431 NN
CCMT 432 NN
CCMT 433 NN
Page 13
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CCMT 3(2.5)1 NN
Screw Down ClampingSingle Sided
CCMT 3(2.5)1 NN
��
CCMT
150 0.079 0.008 0.01 1,082
1 180 0.004 0.079 0.007 0.01 590 918 0.039 0.007
210 0.079 0.006 0.01 820
180 0.079 0.007 0.01 918
2230
0.0040.079 0.007 0.01
394820
0.039 0.006280 0.059 0.006 0.01 689
320 0.059 0.006 0.01 590
220 0.079 0.006 0.01 623
3
2800.004
0.059 0.006 0.01230
4920.039 0.005
320 0.059 0.005 0.01 426
350 0.059 0.005 0.01 328
0.052 0.004 0.00 295
0.046 0.004 0.00 262
0.040 0.003 0.00 230
0.003
0.004
0.003
0.004 131 0.028 0.003
98 0.024 0.003
164 0.033 0.004
0.002
0.003
4 210 0.079 0.006 0.01 558 886 0.039 0.006to 250
5230
0.004 0.071
0.003
0.006 0.01 525 689 0.039 0.005to 270
6 ------- 0.059
0.003
0.005 0.01 230 492 0.039 0.005
7 Annealed 0.004 0.079
0.003
0.006 0.01 558 820 0.039 0.006
8 0.004 0.079
0.003
0.006 0.01558 820
0.039 0.006Treated 394 623
140 0.01 820
9to 230
0.004 0.079
0.003
0.007 0.01 558 754 0.039 0.007
0.01 689
210 0.01 754
10260 0.004 0.079
0.002
0.006 0.01 394 623 0.039 0.006
310 0.01 492
Annealed
0.002
0.004 0.039 0.004 0.00 98 164 0.024 0.0030.002
0.01 115
-------- 0.004 0.059 0.003 0.006 0.0182
131 0.039 0.005
0.01 213
-------- 0.004 0.059 0.0030.006 0.01 115 197 0.039 0.006
0.01 92 131 0.005
131
92
0.0390.005
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 14
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning CCMT 3(2.5)1 NN
CCMT 3(2.5)1 NN
��
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 15
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CCMT 3(2.5)2 NNCCMT 3(2.5)1 NN
CCMT 3(2.5)2 NN
��
CCMT
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 16
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning CCMT 3(2.5)2 WM
CCMT 3(2.5)2 WM
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 17
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CCMT 431 NN
CCMT 431 NNCCMT 3(2.5)2 WM
��
CCMT
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 18
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
CCMT 432 NN
CCMT 432 NN
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 19
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CCMT 433 NNCCMT 432 NN
CCMT 433 NN
��
CCMT
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 20
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert Designation Grade l s r Catalog Nr. Page*
CNMA 434 NN LT 10 T0000612 211/2" 3/16" 1/16"
C N M A
Insert Designation
CNMA 434 NN
Shape Clearance Angle Tolerance Insert Type80° Diamond 0° No rake Cylindrical hole,
No Chip breaker.d ± 0.05 m ± 0.08s ± 0.13
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
�0
80° Diamond shape flat insert. Strong edge preparation mainly for Gray Cast Iron machining. For general purpose Turning, Facing and Boring operations.
Page 21
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CNMA 434 NN
CNMA 434 NN
Cylindrical hole,No Chip breaker.
��
CNMA
150
1 180
210
180
2230
280
320
220
3
280
320
350
4 210to 250
5230
to 270
6 -------
7 Annealed
8Treated
140 0.118 820
9to 230
0.020 0.197 0.035 0.106 558 754 0.157 0.024
0.106 689
210 0.091 754
10260 0.020 0.197
0.008
0.028 0.079 394 623 0.157 0.020
310 0.071 492
Annealed
0.008
0.020 0.071 0.006 0.010 98 164 0.047 0.0050.002
--------
--------
Material Group Material d.o.c [inch] feed [inch/rev]A max
Vc [SFM] Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
CNMA inserts are not recommended for Low Carbon Steel
CNMA inserts are not recommended for Alloy Steel
CNMA inserts are not recommended for High Alloy Steel
CNMA inserts are not recommended for Exotic materials
CNMA inserts are not recommended for Exotic materials
CNMA inserts are not recommended for Martensitic Stainless Steel
CNMA inserts are not recommended for Ferritic Stainless Steel
CNMA inserts are not recommended for Austenitic Stainless Steel
11
12
Page 22
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert Designation Grade l s r Catalog Nr. Page*
CNMG 431 NN
CNMG 432 NN
CNMG 432 NR
CNMG 432 NP
CNMG 432 WM
CNMG 433 NN
T0000491
T0000059
T0001436
T0001966
T0000060
T0000061
23
24
25
26
27
28
1/2" 3/16" 1/64"
1/2" 3/16" 1/32"
1/2" 3/16" 1/32"
1/2" 3/16" 1/32"
1/2" 3/16" 1/32"
1/2" 3/16" 3/64"
C N M GShape Clearance Angle Tolerance Insert Type
80° Diamond 0° No rake Pin / Top clamp Double sided
d ± 0.05 m ± 0.08s ± 0.13
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
WM Wiper Medium chip breaker
CNMG 431 NN
CNMG 432 NN
CNMG 432 NR
CNMG 432 NP
CNMG 432 WM
CNMG 433 NN
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
��
The most popular general purpose Turning inserts. Use for Turning, Facing and Boring operations.
Page 23
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CNMG 431 NN
Pin / Top clamp Double sided
CNMG 431 NN
��
CNMG150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 24
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning CNMG 432 NN
CNMG 432 NN
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 25
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CNMG 432 NRCNMG 432 NN
CNMG 432 NR
��
CNMG150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 26
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning CNMG 432 NP
CNMG 432 NP
��
150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 27
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CNMG 432 WMCNMG 432 NP
CNMG 432 WM
��
CNMG150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 28
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning CNMG 433 NN
CNMG 433 NN
��
150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 29
Machining conditionsTurning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
CNMG 433 NN
CNMM 432 NR
CNMM 433 NR
T0000669
T0000671
30
31
1/2" 3/16" 1/32"
1/2" 3/16" 3/64"
LT 10
LT 10
C N M MShape Clearance Angle Tolerance Insert Type
80° Diamond 0° No rake Pin / Top clamp Double sided
d ± 0.05 m ± 0.08s ± 0.13
CNMM 432 NR
CNMM 433 NR
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
��
CNMM
80° Diamond shape, single sided inserts. Strong cutting edge for roughing operations which inclu-des interrupted cut, high feeds and high depth of cut.
NR Roughing chip breaker
Page 30
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning CNMM 432 NR
CNMM 432 NR
�0
150 0.276 0.024 0.12 1,082
1 180 0.047 0.276 0.024 0.10 590 918 0.197 0.018
210 0.276 0.024 0.09 820
180 0.276 0.020 0.09 918
2230
0.0390.276 0.016 0.08
394820
0.197 0.014280 0.276 0.015 0.06 689
320 0.276 0.013 0.06 590
220 0.276 0.017 0.07 623
3
2800.031
0.276 0.013 0.06230
4920.197 0.014
320 0.197 0.012 0.05 426
350 0.197 0.011 0.04 328
0.157 0.009 0.04 295
0.139 0.008 0.03 262
0.118 0.007 0.02 230
0.012
0.010
0.010
0.031 131 0.098 0.007
98 0.079 0.006
164 0.118 0.008
0.006
0.011
4 210 0.276 0.017 0.07 558 886 0.197 0.013to 250
5230
0.039 0.197
0.010
0.015 0.06 525 689 0.197 0.011to 270
6 ------- 0.197
0.009
0.014 0.06 230 492 0.197 0.010
7 Annealed 0.039 0.276
0.008
0.017 0.07 558 820 0.197 0.013
8 0.039 0.276
0.009
0.017 0.07558 820
0.197 0.013Treated 394 623
140 0.11 820
9to 230
0.039 0.276
0.009
0.024 0.10 558 754 0.197 0.016
0.09 689
210 0.10 754
10260 0.031 0.276
0.009
0.020 0.09 394 623 0.197 0.015
310 0.09 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.05 115
-------- 0.031 0.197 0.010 0.015 0.0582
131 0.118 0.013
0.06 213
-------- 0.031 0.197 0.0090.015 0.06 115 197 0.118 0.013
0.04 92 131 0.012
131
92
0.1180.013
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 31
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CNMM 433 NRCNMM 432 NR
CNMM 433 NR
��
CNMM
150 0.276 0.031 0.14 1,082
1 180 0.059 0.276 0.031 0.13 590 918 0.197 0.024
210 0.276 0.031 0.11 820
180 0.276 0.028 0.12 918
2230
0.0470.276 0.026 0.10
394820
0.197 0.017280 0.276 0.022 0.09 689
320 0.276 0.020 0.08 590
220 0.276 0.024 0.10 623
3
2800.039
0.276 0.020 0.09230
4920.157 0.014
320 0.197 0.016 0.08 426
350 0.197 0.014 0.07 328
0.157 0.013 0.06 295
0.139 0.012 0.05 262
0.118 0.010 0.04 230
0.014
0.012
0.011
0.039 131 0.117 0.011
98 0.100 0.009
164 0.138 0.011
0.007
0.013
4 210 0.276 0.023 0.11 558 886 0.157 0.013to 250
5230
0.059 0.197
0.011
0.020 0.09 525 689 0.157 0.011to 270
6 ------- 0.197
0.010
0.020 0.07 230 492 0.157 0.010
7 Annealed 0.047 0.276
0.010
0.020 0.11 558 820 0.157 0.013
8 0.047 0.276
0.011
0.020 0.11558 820
0.157 0.013Treated 394 623
140 0.15 820
9to 230
0.059 0.276
0.011
0.035 0.14 558 754 0.157 0.016
0.13 689
210 0.14 754
10260 0.047 0.276
0.011
0.030 0.13 394 623 0.157 0.015
310 0.12 492
Annealed
0.009
0.039 0.094 0.009 0.02 98 164 0.047 0.0070.005
0.06 115
-------- 0.047 0.197 0.011 0.018 0.0682
131 0.118 0.013
0.06 213
-------- 0.047 0.197 0.0100.018 0.05 115 197 0.118 0.013
0.04 92 131 0.012
131
92
0.1180.016
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 32
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
CNMP 432 NN
CNMP 433 NN
T0000062
T0000063
33
34
12 4,76 0,8
12 4,76 1,2
C N M PShape Clearance Angle Tolerance Insert Type
80° Diamond 0° No rake Pin / Top clamp Double sided
d ± 0.05 m ± 0.08s ± 0.13
LT 10
LT 10
CNMP 432 NN
CNMP 433 NN
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
��
80° Diamond shape, double sided inserts with positive chip breaker geometry. Generates low cut-ting forces, suitable for High Temperature Alloys.
Page 33
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
CNMP 432 NN
Pin / Top clamp Double sided
CNMP 432 NN
��
CNMP
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 34
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning CNMP 433 NN
CNMP 433 NN
��
150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
11 -------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
12 -------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
Page 35
Machining conditionsTurning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
CNMP 433 NN
LT 10
LT 10
LT 10
D C M TShape Clearance Angle Tolerance Insert Type
55° Diamond 7° Positive rake Screw down clamping
Single sided
d ± 0.05 m ± 0.08s ± 0.13
DCMT 2(1.5)1 NN
DCMT 3(2.5)1 NN
DCMT 3(2.5)2 NN
DCMT 2(1.5)1 NN
DCMT 3(2.5)1 NN
DCMT 3(2.5)2 NN
T0000064
T0000065
T0000721
36
37
38
1/4" 3/32" 1/64"
3/8" 5/32" 1/64"
3/8" 5/32" 1/32"
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
��
DCMT
55° Diamond shape inserts, suitable for Internal turning due to a unique chip removal geometry. Generates low cutting forces, most suitable for small work-pieces.
Page 36
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning DCMT 2(1.5)1 NN
DCMT 2(1.5)1 NN
��
150 0.079 0.008 0.01 1,082
1 180 0.004 0.079 0.007 0.01 590 918 0.039 0.007
210 0.079 0.006 0.01 820
180 0.079 0.007 0.01 918
2230
0.0040.079 0.007 0.01
394820
0.039 0.006280 0.059 0.006 0.01 689
320 0.059 0.006 0.01 590
220 0.079 0.006 0.01 623
3
2800.004
0.059 0.006 0.01230
4920.039 0.005
320 0.059 0.005 0.01 426
350 0.059 0.005 0.01 328
0.052 0.004 0.00 295
0.046 0.004 0.00 262
0.040 0.003 0.00 230
0.003
0.004
0.003
0.004 131 0.028 0.003
98 0.024 0.003
164 0.033 0.004
0.002
0.003
4 210 0.079 0.006 0.01 558 886 0.039 0.006to 250
5230
0.004 0.071
0.003
0.006 0.01 525 689 0.039 0.005to 270
6 ------- 0.059
0.003
0.005 0.01 230 492 0.039 0.005
7 Annealed 0.004 0.079
0.003
0.006 0.01 558 820 0.039 0.006
8 0.004 0.079
0.003
0.006 0.01558 820
0.039 0.006Treated 394 623
140 0.01 820
9to 230
0.004 0.079
0.003
0.007 0.01 558 754 0.039 0.007
0.01 689
210 0.01 754
10260 0.004 0.079
0.002
0.006 0.01 394 623 0.039 0.006
310 0.01 492
Annealed
0.002
0.004 0.039 0.004 0.00 98 164 0.024 0.0030.002
0.01 115
-------- 0.004 0.059 0.003 0.006 0.0182
131 0.039 0.005
0.01 213
-------- 0.004 0.059 0.0030.006 0.01 115 197 0.039 0.006
0.01 92 131 0.005
131
92
0.0390.005
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 37
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
DCMT 3(2.5)1 NNDCMT 2(1.5)1 NN
DCMT 3(2.5)1 NN
��
DCMT
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 38
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning DCMT 3(2.5)2 NN
DCMT 3(2.5)2 NN
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 39
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Insert Designation Grade l s r Catalog Nr. Page*
DCMT 3(2.5)2 NN
D N M GShape Clearance Angle Tolerance Insert Type
55° Diamond 0° No rake Pin / Top clamp Double sided
d ± 0.05 m ± 0.08s ± 0.13
DNMG 331 NN
DNMG 332 NN
DNMG 431 NN
DNMG 432 NN
DNMG 433 NN
DNMG 451 NN
DNMG 452 NN
DNMG 453 NN
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
T0000066
T0000675
T0000476
T0000475
T0001021
T0000583
T0000067
T0000672
40
41
42
43
44
45
46
47
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
1/2" 3/16" 1/64"
1/2" 3/16" 1/32"
1/2" 3/16" 3/64"
1/2" 1/4" 1/64"
1/2" 1/4" 1/32"
1/2" 1/4" 3/64"
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
DNMG 331 NN
DNMG 332 NN
DNMG 431 NN
DNMG 432 NN
DNMG 433 NN
DNMG 451 NN
DNMG 452 NN
DNMG 453 NN
��
DNMG
55° Diamond shape inserts. Suitable for roughing complex shapes operations such as Profiling, Copying and Finishing turning operations.
Page 40
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
DNMG ��� NN
DNMG 331 NN
�0
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 41
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
DNMG ��� NN
DNMG 332 NNDNMG 331 NN
��
DNMG
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 42
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
DNMG ��� NN
DNMG 431 NN
��
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 43
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
DNMG ��� NN
DNMG 432 NNDNMG 431 NN
��
DNMG
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 44
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
DNMG ��� NN
DNMG 433 NN
��
150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 45
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
DNMG ��� NN
DNMG 451 NNDNMG 433 NN
��
DNMG
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 46
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
DNMG 452 NN
DNMG 452 NN
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 47
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
DNMG 453 NN
DNMG 453 NNDNMG 452 NN
��
DNMG
150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 48
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
KNUX 160405 R11 T0000951 50 16 4,76 0,5
K N U XShape Clearance Angle Tolerance Insert Type
55° Rectangular 0° No rake Pin / Top clamp Single sided
l ± 0.13 m ± 0.2s ± 0.13
LT 10
KNUX 160405 R11
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
��
A 55° nose angle insert with two cutting edges. Popular insert with excellent chip control and low cutting forces, suitable for conventional Turning operations.
Page 49
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
KNUX 160405 R11
KNUX 160405 R11
��
KNUX
150 0.197 0.012 0.03 1,082
1 180 0.008 0.157 0.011 0.03 590 918 0.118 0.006
210 0.157 0.010 0.03 820
180 0.157 0.011 0.03 918
2230
0.0080.157 0.010 0.03
394820
0.118 0.006280 0.118 0.009 0.02 689
320 0.118 0.008 0.02 590
220 0.118 0.009 0.02 623
3
2800.008
0.118 0.008 0.00230
4920.079 0.005
320 0.118 0.007 0.01 426
350 0.118 0.006 0.00 328
0.104 0.005 0.00 295
0.091 0.004 0.00 262
0.080 0.003 0.00 230
0.005
0.003
0.003
0.008 131 0.057 0.004
98 0.048 0.003
164 0.067 0.005
0.002
0.004
4 210 0.157 0.009 0.03 558 886 0.118 0.006to 250
5230
0.008 0.118
0.005
0.008 0.02 525 689 0.079 0.006to 270
6 ------- 0.118
0.004
0.007 0.02 230 492 0.079 0.008
7 Annealed 0.008 0.118
0.003
0.009 0.02 558 820 0.079 0.006
8 0.008 0.118
0.004
0.009 0.02558 820
0.079 0.006Treated 394 623
140 0.03 820
9to 230
0.008 0.197
0.004
0.012 0.03 558 754 0.118 0.006
0.02 689
210 0.03 754
10260 0.008 0.157
0.005
0.010 0.02 394 623 0.098 0.005
310 0.02 492
Annealed
0.004
0.016 0.055 0.006 0.01 98 164 0.039 0.0040.002
0.02 115
-------- 0.008 0.118 0.003 0.009 0.0282
131 0.059 0.005
0.02 213
-------- 0.008 0.118 0.0030.009 0.02 115 197 0.059 0.005
0.02 92 131 0.005
131
92
0.0590.008
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 50
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert Designation Grade l s r Catalog Nr. Page*
R C M TShape Clearance Angle Tolerance Insert TypeRound 7° Positive rake Screw down clamping
Single sidedl ± 0.05 s ± 0.13
RCMT 0602 M0
RCMT 0803 M0
RCMT 10T3 M0
RCMT 1204 M0
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
RCMT 0602 M0
RCMT 0803 M0
RCMT 10T3 M0
RCMT 1204 M0
T0000090
T0000091
T0000092
T0000093
51
52
53
54
06 2,38 3
08 3,18 4
10 3,97 5
12 4,76 6
LT 10
LT 10
LT 10
LT 10
�0
Round inserts with positive rake angle and excellent edge resistance. Suitable for Profiling opera-tions of Mill rolls and Aerospace parts.
Page 51
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
RCMT 0602 M0
RCMT 0602 M0
��
RCMT
150 0.079 0.014 0.03 1,148
1 180 0.020 0.079 0.014 0.03 590 918 0.039 0.014
210 0.059 0.014 0.02 820
180 0.079 0.012 0.02 918
2230
0.0200.079 0.012 0.02
394820
0.039 0.012280 0.079 0.012 0.02 689
320 0.059 0.010 0.01 590
220 0.079 0.012 0.02 623
3
2800.020
0.079 0.012 0.02230
4920.039 0.011
320 0.059 0.012 0.01 426
350 0.059 0.010 0.01 328
0.047 0.009 0.01 295
0.039 0.007 0.00 262
0.031 0.005 0.00 230
0.006
0.005
0.005
0.020 131 0.028 0.006
98 0.024 0.005
164 0.033 0.008
0.003
0.006
4 210 0.079 0.010 0.01 558 886 0.039 0.014to 250
5230
0.020 0.079
0.006
0.007 0.01 394 689 0.039 0.013to 270
6 ------- 0.059
0.005
0.007 0.01 230 394 0.039 0.011
7 Annealed 0.020 0.079
0.005
0.008 0.01 558 820 0.039 0.013
8 0.020 0.079
0.006
0.008 0.01558 820
0.039 0.013Treated 394 689
140 0.03 918
9to 230
0.020 0.079
0.006
0.018 0.03 558 820 0.039 0.014
0.03 754
210 0.02 754
10260 0.020 0.079
0.004
0.014 0.02 394 623 0.039 0.012
310 0.02 492
Annealed
0.004
0.008 0.039 0.004 0.00 98 164 0.024 0.0030.002
0.01 115
-------- 0.020 0.059 0.005 0.007 0.0182
131 0.039 0.011
0.01 213
-------- 0.020 0.059 0.0050.007 0.01 115 197 0.039 0.012
0.01 92 131 0.011
131
92
0.0390.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 52
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning RCMT 0803 M0
RCMT 0803 M0
��
150 0.079 0.017 0.03 1,148
1 180 0.020 0.079 0.017 0.03 590 918 0.039 0.014
210 0.059 0.017 0.03 820
180 0.079 0.014 0.03 918
2230
0.0200.079 0.014 0.02
394820
0.039 0.012280 0.079 0.014 0.02 689
320 0.059 0.012 0.02 590
220 0.079 0.014 0.02 623
3
2800.020
0.079 0.014 0.02230
4920.039 0.011
320 0.059 0.014 0.02 426
350 0.059 0.012 0.01 328
0.051 0.010 0.01 295
0.039 0.008 0.01 262
0.033 0.006 0.00 230
0.006
0.005
0.005
0.020 131 0.028 0.007
98 0.023 0.006
164 0.033 0.009
0.003
0.006
4 210 0.079 0.012 0.02 558 886 0.039 0.014to 250
5230
0.020 0.079
0.006
0.008 0.01 394 689 0.039 0.013to 270
6 ------- 0.059
0.005
0.008 0.01 230 394 0.039 0.011
7 Annealed 0.020 0.079
0.005
0.009 0.02 558 820 0.039 0.013
8 0.020 0.079
0.006
0.009 0.02558 820
0.039 0.013Treated 394 689
140 0.04 918
9to 230
0.020 0.079
0.006
0.021 0.04 558 820 0.039 0.014
0.04 754
210 0.03 754
10260 0.020 0.079
0.004
0.017 0.03 394 623 0.039 0.012
310 0.02 492
Annealed
0.004
0.020 0.039 0.008 0.01 98 164 0.028 0.0070.003
0.01 115
-------- 0.020 0.059 0.005 0.008 0.0182
131 0.039 0.011
0.01 213
-------- 0.020 0.059 0.0050.008 0.01 115 197 0.039 0.012
0.01 92 131 0.011
131
92
0.0390.007
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 53
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
RCMT 10T3 M0RCMT 0803 M0
RCMT 10T3 M0
��
RCMT
150 0.118 0.020 0.04 1,148
1 180 0.020 0.118 0.020 0.04 590 918 0.039 0.014
210 0.079 0.020 0.04 820
180 0.118 0.018 0.04 918
2230
0.0200.079 0.017 0.03
394820
0.039 0.012280 0.079 0.017 0.03 689
320 0.079 0.014 0.02 590
220 0.079 0.018 0.03 623
3
2800.020
0.079 0.017 0.03230
4920.039 0.011
320 0.059 0.017 0.02 426
350 0.059 0.014 0.02 328
0.047 0.012 0.01 295
0.039 0.010 0.01 262
0.033 0.008 0.01 230
0.008
0.006
0.006
0.020 131 0.030 0.009
98 0.020 0.007
164 0.039 0.011
0.004
0.008
4 210 0.079 0.014 0.02 558 886 0.039 0.014to 250
5230
0.020 0.079
0.007
0.010 0.01 394 689 0.039 0.013to 270
6 ------- 0.059
0.006
0.010 0.01 230 394 0.039 0.011
7 Annealed 0.020 0.079
0.006
0.011 0.02 558 820 0.039 0.013
8 0.020 0.079
0.008
0.011 0.02558 820
0.039 0.013Treated 394 689
140 0.06 918
9to 230
0.020 0.079
0.008
0.025 0.05 558 820 0.039 0.014
0.05 754
210 0.04 754
10260 0.020 0.079
0.005
0.019 0.04 394 623 0.039 0.012
310 0.03 492
Annealed
0.005
0.020 0.039 0.010 0.01 98 164 0.030 0.0090.004
0.01 115
-------- 0.020 0.059 0.006 0.010 0.0182
131 0.039 0.011
0.01 213
-------- 0.020 0.059 0.0060.010 0.01 115 197 0.039 0.012
0.01 92 131 0.011
131
92
0.0390.008
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 54
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
RCMT 1204 M0
RCMT 1204 M0
��
150 0.157 0.028 0.06 1,148
1 180 0.020 0.157 0.028 0.06 590 918 0.079 0.018
210 0.118 0.028 0.06 820
180 0.157 0.024 0.06 918
2230
0.0200.118 0.024 0.05
394820
0.079 0.016280 0.118 0.024 0.04 689
320 0.098 0.020 0.03 590
220 0.118 0.024 0.05 623
3
2800.020
0.118 0.024 0.04230
4920.079 0.015
320 0.079 0.024 0.03 426
350 0.079 0.020 0.02 328
0.067 0.017 0.02 295
0.057 0.014 0.01 262
0.048 0.011 0.01 230
0.009
0.007
0.007
0.020 131 0.057 0.012
98 0.048 0.010
164 0.067 0.014
0.004
0.009
4 210 0.118 0.020 0.03 558 886 0.079 0.014to 250
5230
0.020 0.118
0.008
0.014 0.02 394 689 0.079 0.013to 270
6 ------- 0.079
0.007
0.014 0.02 230 394 0.059 0.011
7 Annealed 0.020 0.118
0.007
0.016 0.03 558 820 0.079 0.013
8 0.020 0.118
0.009
0.016 0.03558 820
0.079 0.013Treated 394 689
140 0.07 918
9to 230
0.020 0.118
0.009
0.035 0.06 558 820 0.079 0.014
0.06 754
210 0.06 754
10260 0.020 0.118
0.006
0.028 0.05 394 623 0.059 0.012
310 0.05 492
Annealed
0.006
0.020 0.047 0.011 0.01 98 164 0.039 0.0080.004
0.02 115
-------- 0.020 0.079 0.007 0.014 0.0282
131 0.059 0.011
0.02 213
-------- 0.020 0.079 0.0070.014 0.02 115 197 0.059 0.012
0.02 92 131 0.011
131
92
0.0590.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 55
Machining conditionsTurning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
90°
S C M T
Square 90° 0° No rake Pin / Top clamp Double sided
l ± 0.08 m ± 0.13s ± 0.13
SCMT 3(2.5)1 NN
SCMT 3(2.5)2 NN
SCMT 432 NN
LT 10
LT 10
LT 10
T0001459
T0001458
T0001777
56
57
58
3/8" 5/32" 1/64"
3/8" 5/32" 1/32"
1/2" 3/16" 1/32"
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
SCMT 3(2.5)1 NN
SCMT 3(2.5)2 NN
SCMT 432 NN
Shape Clearance Angle Tolerance Insert Type
RCMT 1204 M0
��
SCMT
Square inserts with a positive rake angle with excellent cutting edge resistance. Suitable for Boring.
Page 56
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning SCMT 3(2.5)1 NN
SCMT 3(2.5)1 NN
��
150 0.118 0.009 0.02 1,082
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.008
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.007280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.006
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.00 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.006to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.006Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.006
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 57
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
SCMT 3(2.5)2 NNSCMT 3(2.5)1 NN
SCMT 3(2.5)2 NN
��
SCMT
150 0.236 0.019 0.07 1,082
1 180 0.020 0.197 0.017 0.06 590 918 0.079 0.013
210 0.197 0.014 0.05 820
180 0.197 0.017 0.06 918
2230
0.0200.197 0.017 0.05
394820
0.079 0.013280 0.157 0.015 0.04 689
320 0.157 0.013 0.03 590
220 0.197 0.015 0.05 623
3
2800.020
0.197 0.013 0.04230
4920.079 0.012
320 0.157 0.012 0.03 426
350 0.157 0.012 0.03 328
0.051 0.004 0.00 230
0.043 0.004 0.00 230
0.031 0.003 0.00 164
0.008
0.007
0.007
0.020 131 0.031 0.002
98 0.031 0.002
131 0.031 0.002
0.002
0.008
4 210 0.197 0.015 0.04 558 886 0.079 0.013to 250
5230
0.020 0.157
0.008
0.013 0.03 394 689 0.079 0.011to 270
6 ------- 0.157
0.007
0.012 0.03 230 394 0.079 0.009
7 Annealed 0.020 0.157
0.007
0.015 0.04 558 820 0.079 0.012
8 0.020 0.157
0.009
0.015 0.04558 820
0.079 0.012Treated 394 656
140 0.07 820
9to 230
0.020 0.236
0.009
0.017 0.06 558 754 0.118 0.013
0.05 689
210 0.05 754
10260 0.020 0.197
0.006
0.015 0.05 394 623 0.118 0.012
310 0.04 492
Annealed
0.006
0.020 0.051 0.005 0.01 98 164 0.024 0.0040.002
0.03 115
-------- 0.020 0.138 0.008 0.013 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.138 0.0070.013 0.03 115 197 0.079 0.011
0.03 92 131 0.009
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 58
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning SCMT 432 NN
SCMT 432 NN
��
150 0.236 0.019 0.07 1,082
1 180 0.020 0.197 0.017 0.06 590 918 0.079 0.013
210 0.197 0.014 0.05 820
180 0.197 0.017 0.06 918
2230
0.0200.197 0.017 0.05
394820
0.079 0.013280 0.157 0.015 0.04 689
320 0.157 0.013 0.03 590
220 0.197 0.015 0.05 623
3
2800.020
0.197 0.013 0.04230
4920.079 0.012
320 0.157 0.012 0.03 426
350 0.157 0.012 0.03 328
0.051 0.004 0.00 230
0.043 0.004 0.00 230
0.031 0.003 0.00 164
0.008
0.007
0.007
0.020 131 0.031 0.002
98 0.031 0.002
131 0.031 0.002
0.002
0.008
4 210 0.197 0.015 0.04 558 886 0.079 0.013to 250
5230
0.020 0.157
0.008
0.013 0.03 394 689 0.079 0.011to 270
6 ------- 0.157
0.007
0.012 0.03 230 394 0.079 0.009
7 Annealed 0.020 0.157
0.007
0.015 0.04 558 820 0.079 0.012
8 0.020 0.157
0.009
0.015 0.04558 820
0.079 0.012Treated 394 656
140 0.07 820
9to 230
0.020 0.236
0.009
0.017 0.06 558 754 0.118 0.013
0.05 689
210 0.05 754
10260 0.020 0.197
0.006
0.015 0.05 394 623 0.118 0.012
310 0.04 492
Annealed
0.006
0.020 0.051 0.005 0.01 98 164 0.024 0.0040.002
0.03 115
-------- 0.020 0.138 0.008 0.013 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.138 0.0070.013 0.03 115 197 0.079 0.011
0.03 92 131 0.009
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 59
Machining conditionsTurning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
SCMT 432 NN
90°
S N M G
Square 90° 0° No rake Pin / Top clamp Double sided
l ± 0.08 m ± 0.13s ± 0.13
SNMG 432 NN
SNMG 433 NN
LT 10
LT 10
T0000322
T0000323
60
61
1/2" 3/16" 1/32"
1/2" 3/16" 3/64"
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
SNMG 432 NN
SNMG 433 NN
Shape Clearance Angle Tolerance Insert Type
��
SNMG
Square inserts with strong cutting edge. Suitable for roughing operations.
Page 60
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning SNMG 432 NN
SNMG 432 NN
�0
150 0.197 0.025 0.07 1,148
1 180 0.020 0.197 0.025 0.07 590 984 0.118 0.020
210 0.157 0.022 0.06 820
180 0.197 0.022 0.05 918
2230
0.0200.157 0.022 0.05
394820
0.098 0.017280 0.157 0.020 0.05 689
320 0.138 0.020 0.04 590
220 0.157 0.022 0.05 623
3
2800.020
0.157 0.022 0.05230
4920.079 0.016
320 0.118 0.020 0.03 426
350 0.118 0.020 0.03 328
0.098 0.017 0.02 295
0.079 0.014 0.02 262
0.067 0.011 0.01 230
0.012
0.010
0.010
0.020 131 0.047 0.011
98 0.028 0.010
164 0.059 0.014
0.006
0.012
4 210 0.197 0.022 0.04 558 886 0.083 0.020to 250
5230
0.020 0.157
0.011
0.020 0.03 525 689 0.083 0.018to 270
6 ------- 0.157
0.010
0.020 0.02 230 492 0.069 0.016
7 Annealed 0.020 0.157
0.010
0.020 0.04 558 820 0.083 0.018
8 0.020 0.157
0.012
0.020 0.04558 820
0.083 0.018Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.012
0.034 0.07 558 754 0.083 0.020
0.07 689
210 0.06 754
10260 0.020 0.197
0.008
0.028 0.05 394 623 0.083 0.017
310 0.05 492
Annealed
0.008
0.020 0.067 0.014 0.01 98 164 0.028 0.0100.006
0.03 115
-------- 0.020 0.118 0.011 0.020 0.0382
131 0.055 0.016
0.03 213
-------- 0.020 0.118 0.0100.020 0.03 115 197 0.055 0.017
0.02 92 131 0.016
131
92
0.0550.017
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 61
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
SNMG 433 NNSNMG 432 NN
SNMG 433 NN
��
SNMG
150 0.197 0.038 0.12 1,082
1 180 0.020 0.197 0.038 0.12 590 918 0.118 0.028
210 0.197 0.034 0.10 820
180 0.197 0.034 0.10 918
2230
0.0200.197 0.034 0.08
394820
0.098 0.025280 0.197 0.030 0.08 689
320 0.157 0.030 0.07 590
220 0.197 0.034 0.08 623
3
2800.020
0.197 0.034 0.08230
4920.098 0.022
320 0.157 0.030 0.06 426
350 0.157 0.030 0.06 328
0.139 0.025 0.05 295
0.118 0.020 0.04 262
0.098 0.016 0.02 230
0.015
0.013
0.013
0.020 131 0.071 0.017
98 0.068 0.014
164 0.079 0.020
0.008
0.015
4 210 0.197 0.029 0.07 558 886 0.110 0.022to 250
5230
0.020 0.197
0.015
0.026 0.06 525 689 0.110 0.020to 270
6 ------- 0.197
0.013
0.026 0.04 230 492 0.110 0.018
7 Annealed 0.020 0.197
0.013
0.026 0.06 558 820 0.110 0.020
8 0.020 0.197
0.016
0.026 0.06558 820
0.110 0.020Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.016
0.051 0.11 558 754 0.110 0.034
0.11 689
210 0.09 754
10260 0.020 0.197
0.011
0.039 0.08 394 623 0.110 0.028
310 0.07 492
Annealed
0.011
0.020 0.071 0.008 0.01 98 164 0.039 0.0070.003
0.06 115
-------- 0.020 0.197 0.015 0.026 0.0682
131 0.083 0.021
0.06 213
-------- 0.020 0.197 0.0130.026 0.06 115 197 0.083 0.021
0.05 92 131 0.018
131
92
0.0830.022
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 62
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert Designation Grade l s r Catalog Nr. Page*
T C M TShape Clearance Angle Tolerance Insert Type
Triangle 60° 7° Positive rake Pin / Top clamp Single sided
l ± 0.05 m ± 0.08s ± 0.13
TCMT 2(1.5)1 NN
TCMT 2(1.5)2 NN
TCMT 3(2.5)1 NN
TCMT 3(2.5)2 NN
TCMT 3(2.5)3 NN
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TCMT 2(1.5)1 NN
TCMT 2(1.5)2 NN
TCMT 3(2.5)1 NN
TCMT 3(2.5)2 NN
TCMT 3(2.5)3 NN
T0000477
T0000478
T0000479
T0000068
T0001774
63
64
65
66
67
1/4" 3/32" 1/64"
1/4" 3/32" 1/32"
3/8" 5/32" 1/64"
3/8" 5/32" 1/32"
3/8" 5/32" 3/64"
LT 10
LT 10
LT 10
LT 10
LT 10
��
60° Triangle shape inserts, with positive rake angle. Suitable for regular and sever conditions Boring and Internal turning.
Page 63
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TCMT 2(1.5)1 NN
Pin / Top clamp Single sided
TCMT 2(1.5)1 NN
��
TCMT
Parting
150 0.079 0.008 0.01 1,082
1 180 0.004 0.079 0.007 0.01 590 918 0.039 0.007
210 0.079 0.006 0.01 820
180 0.079 0.007 0.01 918
2230
0.0040.079 0.007 0.01
394820
0.039 0.006280 0.059 0.006 0.01 689
320 0.059 0.006 0.01 590
220 0.079 0.006 0.01 623
3
2800.004
0.059 0.006 0.01230
4920.039 0.005
320 0.059 0.005 0.01 426
350 0.059 0.005 0.01 328
0.052 0.004 0.00 295
0.046 0.004 0.00 262
0.040 0.003 0.00 230
0.003
0.004
0.003
0.004 131 0.028 0.003
98 0.024 0.003
164 0.033 0.004
0.002
0.003
4 210 0.079 0.006 0.01 558 886 0.039 0.006to 250
5230
0.004 0.071
0.003
0.006 0.01 525 689 0.039 0.005to 270
6 ------- 0.059
0.003
0.005 0.01 230 492 0.039 0.005
7 Annealed 0.004 0.079
0.003
0.006 0.01 558 820 0.039 0.006
8 0.004 0.079
0.003
0.006 0.01558 820
0.039 0.006Treated 394 623
140 0.01 820
9to 230
0.004 0.079
0.003
0.007 0.01 558 754 0.039 0.007
0.01 689
210 0.01 754
10260 0.004 0.079
0.002
0.006 0.01 394 623 0.039 0.006
310 0.01 492
Annealed
0.002
0.004 0.039 0.004 0.00 98 164 0.024 0.0030.002
0.01 115
-------- 0.004 0.059 0.003 0.006 0.0182
131 0.039 0.005
0.01 213
-------- 0.004 0.059 0.0030.006 0.01 115 197 0.039 0.006
0.01 92 131 0.005
131
92
0.0390.005
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 64
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning TCMT 2(1.5)2 NN
TCMT 2(1.5)2 NN
��
150 0.079 0.018 0.02 1,312
1 180 0.008 0.079 0.016 0.01 590 1,148 0.039 0.009
210 0.079 0.016 0.01 656
180 0.079 0.016 0.01 984
2230
0.0080.079 0.016 0.01
394820
0.039 0.009280 0.059 0.015 0.01 689
320 0.059 0.014 0.01 590
220 0.079 0.016 0.01 623
3
2800.008
0.059 0.015 0.01230
4920.039 0.007
320 0.059 0.014 0.01 426
350 0.059 0.013 0.01 328
0.047 0.011 0.00 295
0.039 0.009 0.00 262
0.031 0.007 0.00 230
0.006
0.005
0.005
0.008 131 0.030 0.006
98 0.020 0.005
164 0.039 0.006
0.003
0.005
4 210 0.079 0.015 0.01 558 886 0.039 0.009to 250
5230
0.008 0.071
0.006
0.014 0.01 394 689 0.039 0.009to 270
6 ------- 0.059
0.005
0.013 0.01 230 394 0.039 0.009
7 Annealed 0.008 0.079
0.005
0.015 0.01 558 820 0.039 0.009
8 0.008 0.079
0.006
0.014 0.01558 820
0.039 0.006Treated 394 689
140 0.02 918
9to 230
0.008 0.079
0.006
0.016 0.02 558 820 0.039 0.009
0.02 754
210 0.01 754
10260 0.008 0.079
0.006
0.016 0.01 394 623 0.039 0.006
310 0.01 492
Annealed
0.006
0.008 0.031 0.007 0.00 98 164 0.035 0.0050.003
0.01 115
-------- 0.008 0.059 0.006 0.013 0.0182
131 0.028 0.009
0.01 213
-------- 0.008 0.059 0.0050.014 0.01 115 197 0.028 0.009
0.01 92 131 0.009
131
92
0.0280.014
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 65
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TCMT 3(2.5)1 NNTCMT 2(1.5)2 NN
TCMT 3(2.5)1 NN
��
TCMT
Parting
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 66
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning TCMT 3(2.5)2 NN
TCMT 3(2.5)2 NN
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 67
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TCMT 3(2.5)3 NNTCMT 3(2.5)2 NN
TCMT 3(2.5)3 NN
��
TCMT
Parting
150 0.197 0.019 0.05 1,148
1 180 0.020 0.157 0.017 0.04 590 918 0.079 0.013
210 0.157 0.015 0.04 820
180 0.157 0.017 0.04 918
2230
0.0200.157 0.017 0.04
394820
0.059 0.012280 0.118 0.015 0.03 689
320 0.118 0.014 0.02 590
220 0.157 0.015 0.04 623
3
2800.020
0.157 0.014 0.03230
4920.059 0.011
320 0.118 0.013 0.02 426
350 0.118 0.013 0.02 328
0.110 0.011 0.02 295
0.087 0.009 0.01 262
0.059 0.008 0.01 230
0.009
0.008
0.008
0.008 131 0.079 0.008
98 0.047 0.006
131 0.094 0.009
0.002
0.009
4 210 0.157 0.015 0.04 558 886 0.059 0.011to 250
5230
0.020 0.118
0.009
0.014 0.03 394 689 0.059 0.010to 270
6 ------- 0.118
0.008
0.013 0.02 230 394 0.059 0.009
7 Annealed 0.020 0.118
0.008
0.015 0.03 558 820 0.059 0.011
8 0.020 0.118
0.009
0.015 0.03558 820
0.059 0.011Treated 394 689
140 0.05 918
9to 230
0.020 0.197
0.009
0.018 0.05 558 820 0.118 0.013
0.04 754
210 0.04 754
10260 0.020 0.157
0.007
0.015 0.04 394 623 0.098 0.011
310 0.04 492
Annealed
0.007
0.008 0.047 0.005 0.00 98 164 0.035 0.0030.002
0.03 115
-------- 0.020 0.118 0.009 0.013 0.0382
131 0.059 0.010
0.03 213
-------- 0.020 0.118 0.0080.013 0.03 115 197 0.059 0.010
0.03 92 131 0.009
131
92
0.0590.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 68
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert Designation Grade l s r Catalog Nr. Page*
T N M GShape Clearance Angle Tolerance Insert Type
Triangle 60° 0° No rake Pin / Top clamp Double sided
d ± 0.05 m ± 0.08s ± 0.13
TNMG 331 NN
TNMG 332 NN
TNMG 333 NN
TNMG 431 NN
TNMG 432 NN
TNMG 433 NN
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
69
70
71
72
73
74
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
3/8" 3/16" 3/64"
1/2" 3/16" 1/64"
1/2" 3/16" 1/32"
1/2" 3/16" 3/64"
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TNMG ��� NN
TNMG ��� NN
TNMG ��� NN
TNMG ��� NN
TNMG ��� NN
TNMG ��� NN
T0000457
T0000069
T0001734
T0001873
T0000113
T0001735
��
60° Triangle shape inserts. Suitable for General purpose Turning and Copying operations.
Page 69
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TNMG 331 NN
TNMG 331 NN
��
TNMG
Parting
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 70
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
TNMG 332 NN
TNMG 332 NN
�0
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 71
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TNMG 333 NN
TNMG 333 NNTNMG 332 NN
��
TNMG
Parting
150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 72
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
TNMG 431 NN
TNMG 431 NN
��
150 0.157 0.016 0.05 1,082
1 180 0.020 0.157 0.016 0.05 590 918 0.118 0.010
210 0.157 0.012 0.04 820
180 0.157 0.012 0.04 918
2230
0.0200.157 0.012 0.04
394820
0.098 0.010280 0.157 0.011 0.04 689
320 0.157 0.011 0.05 590
220 0.157 0.012 0.04 623
3
2800.020
0.157 0.012 0.04230
4920.079 0.008
320 0.118 0.011 0.04 426
350 0.118 0.011 0.04 328
0.098 0.009 0.02 295
0.079 0.008 0.01 262
0.059 0.006 0.01 230
0.006
0.006
0.005
0.020 131 0.055 0.006
98 0.047 0.005
164 0.067 0.007
0.003
0.006
4 210 0.157 0.012 0.04 558 886 0.079 0.007to 250
5230
0.020 0.118
0.006
0.010 0.04 525 689 0.079 0.006to 270
6 ------- 0.118
0.006
0.010 0.04 230 492 0.079 0.005
7 Annealed 0.020 0.157
0.006
0.010 0.04 558 820 0.079 0.006
8 0.020 0.157
0.006
0.010 0.04558 820
0.079 0.006Treated 394 623
140 0.07 820
9to 230
0.020 0.157
0.006
0.016 0.06 558 754 0.118 0.007
0.05 689
210 0.06 754
10260 0.020 0.157
0.005
0.014 0.05 394 623 0.079 0.006
310 0.04 492
Annealed
0.005
0.020 0.059 0.006 0.01 98 164 0.024 0.0030.003
0.02 115
-------- 0.020 0.118 0.005 0.010 0.0282
131 0.039 0.005
0.01 213
-------- 0.020 0.118 0.0040.010 0.01 115 197 0.039 0.006
0.01 92 131 0.005
131
92
0.0390.009
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 73
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TNMG 432 NN
TNMG 432 NNTNMG 431 NN
��
TNMG
Parting
150 0.276 0.018 0.07 1,148
1 180 0.020 0.276 0.018 0.07 590 984 0.118 0.014
210 0.197 0.016 0.06 820
180 0.276 0.016 0.05 918
2230
0.0200.276 0.016 0.05
394820
0.118 0.012280 0.197 0.014 0.05 689
320 0.157 0.014 0.04 590
220 0.197 0.016 0.05 623
3
2800.020
0.197 0.016 0.05230
4920.098 0.011
320 0.157 0.014 0.03 426
350 0.157 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.276
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.276
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.197 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.197 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 74
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
TNMG 433 NN
TNMG 433 NN
��
150 0.236 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.236 0.024 0.10 918
2230
0.0200.236 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.197 0.021 0.07 590
220 0.236 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.197 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.236
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.236
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 75
Machining conditionsTurning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
TNMP 332 NN T0000492 76 3/8" 3/16" 1/32"
Shape Clearance Angle Tolerance Insert Type
LT 10
TNMP 332 NN
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
T N M P
Triangle 60° 0° No rake Pin / Top clamp Double sided
d ± 0.05 m ± 0.08s ± 0.13
TNMG 433 NN
��
TNMP
60° Triangle shape inserts, with positive chip breaker geometry. Generates considerably low cutting forces. Suitable for General purpose, Copying, High Temperature Alloys and Stainless Steel turning operations.
Page 76
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
TNMP 332 NN
TNMP 332 NN
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 77
Machining conditionsTurning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Insert Designation Grade l s r Catalog Nr. Page*
T N U XShape Clearance Angle Tolerance Insert Type
Triangle 60° 0° No rake Pin / Top clamp Double sided
l ± 0.13 m ± 0.2s ± 0.13
TNUX 331 R
TNUX 331 L
TNUX 332 R
TNUX 332 L
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
T0001125
T0001877
T0001137
T0001878
78
78
79
79
3/8" 3/16" 1/64"
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
3/8" 3/16" 1/32"
LT 10
LT 10
LT 10
LT 10
TNUX 331 R
TNUX 331 L
TNUX 332 R
TNUX 332 L
TNMP 332 NN
��
TNUX
60° Triangle shape inserts. Suitable for General turning and longitudinal operations, where there is a concern for work piece vibrations.
Page 78
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
TNUX 331 R & L
TNUX 331 R & TNUX 331 L
��
150 0.197 0.012 0.05 1,082
1 180 0.008 0.157 0.011 0.03 590 918 0.098 0.006
210 0.157 0.010 0.03 820
180 0.157 0.011 0.03 918
2230
0.0080.157 0.010 0.03
394820
0.079 0.006280 0.118 0.009 0.02 689
320 0.118 0.008 0.02 590
220 0.118 0.009 0.02 623
3
2800.008
0.118 0.008 0.02230
4920.059 0.005
320 0.118 0.007 0.02 426
350 0.118 0.006 0.02 328
0.079 0.005 0.01 295
0.059 0.004 0.01 262
0.039 0.003 0.01 230
0.005
0.003
0.003
0.008 131 0.039 0.003
98 0.020 0.003
164 0.059 0.004
0.002
0.004
4 210 0.157 0.009 0.03 558 886 0.118 0.006to 250
5230
0.008 0.118
0.005
0.008 0.02 525 689 0.079 0.006to 270
6 ------- 0.118
0.004
0.007 0.02 230 492 0.059 0.008
7 Annealed 0.008 0.118
0.003
0.009 0.02 558 820 0.079 0.006
8 0.008 0.118
0.004
0.009 0.02558 820
0.079 0.006Treated 394 623
140 0.05 820
9to 230
0.008 0.197
0.004
0.012 0.05 558 754 0.118 0.006
0.05 689
210 0.03 754
10260 0.008 0.157
0.005
0.010 0.03 394 623 0.079 0.005
310 0.03 492
Annealed
0.004
0.008 0.055 0.004 0.01 98 164 0.039 0.0030.002
0.02 115
-------- 0.008 0.118 0.003 0.009 0.0282
131 0.059 0.005
0.02 213
-------- 0.008 0.118 0.0030.009 0.02 115 197 0.059 0.005
0.02 92 131 0.005
131
92
0.0590.008
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 79
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TNUX 332 R & L
TNUX 332 R & TNUX 332 L
��
TNUX
150 0.197 0.020 0.10 1,082
1 180 0.008 0.157 0.019 0.08 590 918 0.118 0.012
210 0.157 0.017 0.07 820
180 0.157 0.018 0.07 918
2230
0.0080.157 0.017 0.07
394820
0.079 0.012280 0.118 0.016 0.05 689
320 0.118 0.015 0.04 590
220 0.118 0.015 0.04 623
3
2800.008
0.118 0.014 0.04230
4920.079 0.010
320 0.118 0.013 0.03 426
350 0.118 0.012 0.03 328
0.098 0.011 0.02 295
0.083 0.009 0.02 262
0.051 0.008 0.01 230
0.007
0.005
0.005
0.020 131 0.067 0.008
98 0.039 0.007
131 0.087 0.010
0.002
0.006
4 210 0.157 0.009 0.04 558 886 0.118 0.009to 250
5230
0.008 0.118
0.007
0.008 0.02 525 689 0.079 0.007to 270
6 ------- 0.118
0.006
0.007 0.02 230 492 0.079 0.007
7 Annealed 0.008 0.118
0.005
0.009 0.03 558 820 0.079 0.007
8 0.008 0.118
0.006
0.009 0.03558 820
0.079 0.007Treated 394 623
140 0.08 820
9to 230
0.008 0.197
0.006
0.012 0.08 558 754 0.118 0.010
0.08 689
210 0.06 754
10260 0.008 0.157
0.005
0.010 0.06 394 623 0.079 0.005
310 0.06 492
Annealed
0.004
0.020 0.059 0.005 0.00 98 164 0.039 0.0070.002
0.03 115
-------- 0.008 0.118 0.005 0.009 0.0382
131 0.079 0.007
0.03 213
-------- 0.008 0.118 0.0050.009 0.03 115 197 0.079 0.007
0.02 92 131 0.007
131
92
0.0790.008
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 80
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
T P M RShape Clearance Angle Tolerance Insert Type
Triangle 60° 5° Positive rake ClampingSingle sided
d ± 0.05 m ± 0.16s ± 0.13
TPMR 321 NN
TPMR 322 NN
LT 10
LT 10
81
82
3/8" 1/8" 1/64"
3/8" 1/8" 1/32"
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TPMR 160304 NN
TPMR 160308 NN
T0001638
T0001535
�0
60° Triangle shape inserts, with positive rake angle. Suitable for Boring and Internal turningoperations.
Page 81
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
TPMR 321 NN
TPMR 321 NN
��
TPMR
Parting
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 82
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
TPMR 322 NN
TPMR 322 NN
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 83
Machining conditionsTurning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
TPMR 322 NN
V B M TShape Clearance Angle Tolerance Insert Type
35° Diamond 5° Positive rake Screw down clamping Single sided
l ± 0.05 m ± 0.16s ± 0.13
VBMT 221 NN
VBMT 331 NN
VBMT 332 NN
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
T0001460
T0000070
T0000071
84
85
86
1/4" 1/8" 1/64"
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
LT 10
LT 10
LT 10
VBMT 221 NN
VBMT 331 NN
VBMT 332 NN
��
VBMT
35° shape inserts, with positive rake angle. Suitable for internal and external Copying operations of complex geometries.
Page 84
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
VBMT 221 NN
VBMT 221 NN
��
150 0.079 0.008 0.01 1,082
1 180 0.004 0.079 0.007 0.01 590 918 0.039 0.007
210 0.079 0.006 0.01 820
180 0.079 0.007 0.01 918
2230
0.0040.079 0.007 0.01
394820
0.039 0.006280 0.059 0.006 0.01 689
320 0.059 0.006 0.01 590
220 0.079 0.006 0.01 623
3
2800.004
0.059 0.006 0.01230
4920.039 0.005
320 0.059 0.005 0.01 426
350 0.059 0.005 0.01 328
0.052 0.004 0.00 295
0.046 0.004 0.00 262
0.040 0.003 0.00 230
0.003
0.004
0.003
0.004 131 0.028 0.003
98 0.024 0.003
164 0.033 0.004
0.002
0.003
4 210 0.079 0.006 0.01 558 886 0.039 0.006to 250
5230
0.004 0.071
0.003
0.006 0.01 525 689 0.039 0.005to 270
6 ------- 0.059
0.003
0.005 0.01 230 492 0.039 0.005
7 Annealed 0.004 0.079
0.003
0.006 0.01 558 820 0.039 0.006
8 0.004 0.079
0.003
0.006 0.01558 820
0.039 0.006Treated 394 623
140 0.01 820
9to 230
0.004 0.079
0.003
0.007 0.01 558 754 0.039 0.007
0.01 689
210 0.01 754
10260 0.004 0.079
0.002
0.006 0.01 394 623 0.039 0.006
310 0.01 492
Annealed
0.002
0.004 0.039 0.004 0.00 98 164 0.024 0.0030.002
0.01 115
-------- 0.004 0.059 0.003 0.006 0.0182
131 0.039 0.005
0.01 213
-------- 0.004 0.059 0.0030.006 0.01 115 197 0.039 0.006
0.01 92 131 0.005
131
92
0.0390.005
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 85
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
VBMT 221 NN
VBMT 331 NN
VBMT 331 NN
��
VBMT
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 86
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
VBMT 332 NN
VBMT 332 NN
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 87
Machining conditionsTurning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
TurningMachining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
VBMT 332 NN
V C M TShape Clearance Angle Tolerance Insert Type
35° Diamond 7° Positive rake Screw down clamping Single sided
l ± 0.05 m ± 0.16s ± 0.13
VCMT 331 NN
VCMT 332 NN
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
T0001102
T0001103
88
89
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
LT 10
LT 10
VCMT 331 NN
VCMT 332 NN
��
VCMT
35° shape inserts, with positive rake angle. Suitable for internal and external Copying operations of complex geometries.
Page 88
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
VCMT 331 NN
VCMT 331 NN
��
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 89
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
VCMT 331 NN
VCMT ��� NN
VCMT 332 NN
��
VCMT
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 90
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
V N M GShape Clearance Angle Tolerance Insert Type
0° No rake Pin / Top clamp Double sided
l ± 0.05 m ± 0.16s ± 0.13
91
92
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
VNMG 331 NN
VNMG 332 NN
VNMG 331 NN
VNMG 332 NN
LT 10
LT 10
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
T0000072
T0000073
35° Diamond
�0
35° shape inserts. Suitable for Semi-roughing external Copying operations.
Page 91
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
VNMG ��� NN
VNMG 331 NN
��
VNMG
Parting
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 92
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
VNMG ��� NN
VNMG 332 NN
��
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 93
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
VNMG 332 NN
W N M GShape Clearance Angle Tolerance Insert Type
80° Diamond 0° No rake Pin / Top clamp Double sided
l ± 0.05 m ± 0.08s ± 0.13
WNMG 331 NN
WNMG 332 NN
WNMG 431 NN
WNMG 432 NN
WNMG 432 NR
WNMG 432 NP
WNMG 432 WM
WNMG 433 NN
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
T0000133
T0000137
T0000584
T0000075
T0001437
T0001967
T0000076
T0000077
94
95
96
97
98
99
100
101
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
1/2" 3/16" 1/64"
1/2" 3/16" 1/32"
1/2" 3/16" 1/32"
1/2" 3/16" 1/32"
1/2" 3/16" 1/32"
1/2" 3/16" 3/64"
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
WNMG 331 NN
WNMG 332 NN
WNMG 431 NN
WNMG 432 NN
WNMG 432 NR
WNMG 432 NP
WNMG 432 WM
WNMG 433 NN
WM Wiper Medium chip breaker
��
WNMG
80° Trigon shape inserts, with 6 cutting edges. Suitable for all-purpose Turning, Facing and Boring operations.
Page 94
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
WNMG ��� NN
WNMG 331 NN
��
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 95
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
WNMG 331 NN
WNMG 332 NN
WNMG 332 NN
��
WNMG
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 96
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
WNMG 431 NN
WNMG 431 NN
��
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 97
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
WNMG 431 NN
WNMG 432 NN
WNMG 432 NN
��
WNMG
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 98
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
WNMG 432 NR
WNMG 432 NR
��
150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 99
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
WNMG 432 NR
WNMG 432 NP
WNMG 432 NP
��
WNMG
150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 100
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
WNMG 432 WM
WNMG 432 WM
�00
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 101
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
WNMG 432 WM
WNMG 433 NN
WNMG 433 NN
�0�
WNMG
150 0.197 0.027 0.12 1,082
1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020
210 0.197 0.024 0.10 820
180 0.197 0.024 0.10 918
2230
0.0200.197 0.024 0.08
394820
0.157 0.018280 0.197 0.021 0.08 689
320 0.157 0.021 0.07 590
220 0.197 0.024 0.08 623
3
2800.020
0.197 0.024 0.08230
4920.157 0.016
320 0.157 0.021 0.06 426
350 0.157 0.021 0.06 328
0.139 0.018 0.05 295
0.118 0.014 0.04 262
0.098 0.011 0.02 230
0.011
0.009
0.009
0.020 131 0.114 0.012
98 0.097 0.010
164 0.134 0.014
0.005
0.011
4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250
5230
0.020 0.197
0.010
0.018 0.06 525 689 0.157 0.014to 270
6 ------- 0.197
0.009
0.018 0.04 230 492 0.157 0.013
7 Annealed 0.020 0.197
0.009
0.018 0.06 558 820 0.157 0.014
8 0.020 0.197
0.011
0.018 0.06558 820
0.157 0.014Treated 394 623
140 0.12 820
9to 230
0.020 0.197
0.011
0.035 0.11 558 754 0.157 0.024
0.11 689
210 0.09 754
10260 0.020 0.197
0.008
0.028 0.08 394 623 0.157 0.020
310 0.07 492
Annealed
0.008
0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002
0.06 115
-------- 0.020 0.197 0.010 0.018 0.0682
131 0.118 0.015
0.06 213
-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015
0.05 92 131 0.013
131
92
0.1180.015
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 102
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
W N M PShape Clearance Angle Tolerance Insert Type
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
WNMP 331 NN
WNMP 332 NN
WNMP 432 NN
LT 10
LT 10
LT 10
80° Diamond 0° No rake Pin / Top clamp Double sided
l ± 0.05 m ± 0.08s ± 0.13
103
104
105
WNMP 331 NN
WNMP 332 NN
WNMP 432 NN
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
1/2" 3/16" 1/32"
T0000306
T0000307
T0000308
�0�
80° Trigon shape inserts, with positive chip breaker geometry. Generates lower cutting forces,suitable for High Temperature Alloys and Stainless Steel operations.
Page 103
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
WNMP 331 NN
WNMP 331 NN
�0�
WNMP
Parting
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 104
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
WNMP 332 NN
WNMP 332 NN
�0�
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 105
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
WNMP 332 NN
WNMP 432 NN
WNMP 432 NN
�0�
WNMP
Parting
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 106
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Machining Recommendation Guide - Please see Pg. 8
Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
STARV D T C B M T
Shape Clearance Angle Tolerance Insert Type
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
LT 10
LT 10
LT 10
LT 10
35° / 55° / 60° / 80°Diamond
5° Positive rake Screw down clamping Single sided
l ± 0.05 m ± 0.16s ± 0.13
108
109
110
111
ST-CBMT 232-L NN
ST-DBMT 231-L NN
ST-TBMT 231-L NN
ST-VBMT 231-L NN
3/8" 3/16" 1/32"
3/8" 3/16" 1/64"
3/8" 3/16" 1/64"
3/8" 3/16" 1/64"
T0001005
T0000965
T0000996
T0000995
35°55°60°80°
STAR Tool holders on the next page
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
�0�
Exclusive and unique design inserts with positive chip breaker geometry. Suitable for roughing, semi fininshig and finishing operations due to the ability to use the same tool holder and for 35° - 80° angle operations. Limited in Plunging angle.
ST-CBMT 232-L NN
ST-DBMT 231-L NN
ST-TBMT 231-L NN
ST-VBMT 231-L NN
Page 107
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
ST-C/D/T/VBMT
h b l f Catalog Nr. Description
T2001348 ST-SXJBL 0.75-0.75 0.75 0.75 5.00 0.98
T2001349 ST-SXJBL 1.00-1.00 0.75 0.75 6.00 1.25
STAR TOOL-HOLDERS
External
Ød l h f ØDmin Catalog Nr. Description
T2001351 ST-A1.00S-SXJBR 1.00 9.75 0.90 0.66 1.18
Internal
�0�
STAR
Parting
Page 108
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
ST-CBMT 232-L NN
ST-CBMT 232-L
�0�
150 0.197 0.018 0.07 1,148
1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014
210 0.157 0.016 0.06 820
180 0.197 0.016 0.05 918
2230
0.0200.157 0.016 0.05
514820
0.118 0.012280 0.157 0.014 0.05 689
320 0.138 0.014 0.04 590
220 0.157 0.016 0.05 623
3
2800.020
0.157 0.016 0.05464
4920.098 0.011
320 0.118 0.014 0.03 426
350 0.118 0.014 0.03 328
0.098 0.012 0.02 295
0.079 0.010 0.02 262
0.067 0.008 0.01 230
0.008
0.007
0.007
0.020 131 0.067 0.008
98 0.039 0.007
164 0.079 0.010
0.004
0.008
4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250
5230
0.020 0.157
0.008
0.014 0.03 525 689 0.118 0.013to 270
6 ------- 0.157
0.007
0.014 0.02 230 492 0.098 0.011
7 Annealed 0.020 0.157
0.007
0.014 0.04 558 820 0.118 0.013
8 0.020 0.157
0.009
0.014 0.04558 820
0.118 0.013Treated 394 623
140 0.08 820
9to 230
0.020 0.197
0.009
0.024 0.07 558 754 0.118 0.014
0.07 689
210 0.06 754
10260 0.020 0.197
0.006
0.020 0.05 394 623 0.118 0.012
310 0.05 492
Annealed
0.006
0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004
0.03 115
-------- 0.020 0.118 0.008 0.014 0.0382
131 0.079 0.011
0.03 213
-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012
0.02 92 131 0.011
131
92
0.0790.012
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 109
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
ST-CBMT 232-L
ST-DBMT 231-L NN
ST-DBMT 321-L
�0�
STAR
Parting
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 110
Machining conditions TurningMachining conditionsTurning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions TurningMachining conditionsTurning
ST-TBMT 231-L NN
ST-TBMT 321-L
��0
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
-------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
11
12
Page 111
Machining conditions TurningMachining conditionsTurning Machining conditions Turning
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditionsTurning
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
ST-TBMT 321-L
ST-VBMT 231-L NN
ST-VBMT 321-L
���
STAR
Parting
150 0.118 0.009 0.02 1,148
1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007
210 0.098 0.007 0.02 820
180 0.098 0.008 0.02 918
2230
0.0080.098 0.008 0.02
394820
0.079 0.006280 0.079 0.007 0.02 689
320 0.079 0.006 0.01 590
220 0.098 0.007 0.02 623
3
2800.008
0.098 0.006 0.02230
4920.079 0.005
320 0.079 0.006 0.01 426
350 0.079 0.006 0.01 328
0.069 0.005 0.01 295
0.061 0.004 0.01 262
0.054 0.003 0.01 230
0.004
0.004
0.004
0.008 131 0.057 0.003
98 0.048 0.003
164 0.067 0.004
0.002
0.004
4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250
5230
0.008 0.079
0.004
0.006 0.01 525 689 0.079 0.005to 270
6 ------- 0.079
0.004
0.006 0.01 230 492 0.079 0.005
7 Annealed 0.008 0.079
0.004
0.007 0.01 558 820 0.079 0.006
8 0.008 0.079
0.004
0.007 0.01558 820
0.079 0.005Treated 394 623
140 0.03 820
9to 230
0.008 0.118
0.004
0.008 0.02 558 754 0.079 0.007
0.02 689
210 0.02 754
10260 0.008 0.098
0.003
0.007 0.02 394 623 0.079 0.006
310 0.02 492
Annealed
0.003
0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002
0.01 115
11 -------- 0.008 0.079 0.004 0.006 0.0182
131 0.079 0.005
0.01 213
12 -------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006
0.01 92 131 0.005
131
92
0.0790.006
Material Group Material A max Optimal cutting
No Examples*min max min max min max d.o.c feed
conditions
400
480
550
450
Group Brinell hardness
Low CarbonSteel
Alloy Steel
HighAlloy Steel
AusteniticStainless Steel
FerriticStainless Steel
MartensiticStainless Steel
Grey Cast Iron
NodularCast Iron
Nickel BasedAlloys
Titanium BasedAlloys
Ck15, Ck451020, 1045
42 CrMo 4St 50-2Ck6010604140
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
X5 CrNi 18 9304
X2 CrNiMo 17 2 2316
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic
X8 Cr 7430
X15 Cr 13410
GG 20
GG 25
GG 30
GGG 40
GGG 50
GGG 70
Inconel 625
Inconel 718
Hastelloy C
TiAl 6 V4
T40
G-X260NiCr42
d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]
Page 112
���
ONLY ONE GRADE
The Lamina Multi-Mat LT-10 Grade for Turning and Parting can Machine most materials with
Only one grade LT-10
Steel Stainless Steel Cast Iron Super Alloys
Example Example Example Example35 NC 6 316L FC400-12 Inconel 718
True Multi-Mat inserst for real productivity
Page 113
ALU-Turning LT - 05 Aluminium
ALUMINIUM-TURNING INSERTSLamina's unique line of Turning inserts for Aluminum and soft material machining. Based on optimized chip breaker geometry and our unique coated grade, LT-05.
���
ALU- Turning
Steel Stainless Steel Cast Iron Super Alloys
Example Example Example Example35 NC 6 316L FC400-12 Inconel 718
Page 114
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions ALU-Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert Designation Grade l s r Catalog Nr. Page*
CNGG 431 ALU
CNGG 432 ALU
T0001025
T0001019
115
115
1/2" 3/16" 1/64"
1/2" 3/16" 1/32"
C N G GShape Clearance Angle Tolerance Insert Type
80° Diamond 0° No rake Pin / Top clamp Double sided
d ± 0.05 m ± 0.08s ± 0.13
LT 05
LT 05
CNGG 431 ALU
CNGG 432 ALU
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
���
ISO standard inserts with extreme and unique positive chip breaker geometry, for Aluminum turning operations. Suitable mostly for external operations but good also for internal operations, Roughing - Finishing operations.
Page 115
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions ALU-Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Pin / Top clamp Double sided
For high Si Aluminum, it is recommended to use CNMG 120404 NN.See cutting conditions bellow.
For high Si Aluminum, it is recommended to use CNMP 120408 NN.See cutting conditions bellow.
CNGG 431-ALU
CNGG 432-ALU
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
CNGG 431 ALU
CNGG 432 ALU
���
ALU- Turning
AluminiumGroup Material Brinell
hardnessHB
A max Optimal cutting
No Examples*min max min max
[mm2
min max d.o.c feedconditionsd.o.c [Inch] Speedfeed [inch/rev]
AluminiumGroup Material Brinell
hardnessHB
A max Optimal cutting
No Examples*min max min max
[mm2
min max d.o.c feedconditionsd.o.c [Inch] Speedfeed [inch/rev]
]
---- 0.005 0.014 0.0023 4000
---- 0.010 0.197
0.004 0.012 0.0019 20000.02 to 0.12
0.009
---- Recommended to use CNMG 431 - LT-10
13
14
15 Ampco 25
AISi 6 Cu 4
AISi 12
Si < 4%4% < Si < 8%
Si > 8%
1330
830
AluminiumGroup Material Brinell
hardnessHB
A max Optimal cutting
No Examples*min max min max
(mm )2min max d.o.c feed
conditionsd.o.c [Inch] Speedfeed [inch/rev]
---- 0.005 0.024 0.0031 4000
---- 0.010 0.197
0.004 0.020 0.0028 20000.02 to 0.12
0.009
---- Recommended to use CNMP 432 NN - LT-10 Ampco 25
AISi 6 Cu 4
AISi 12
Si < 4%4% < Si < 8%
Si > 8%
1330
830
13
14
15
0.02 0.19 0.004 0.012 0.001 1300 0.02 to 0.05 0.006---- Si > 8% 65014 AlSi 12
0.50 5.0 0.15 0.50 1.50 400 1.0 to 3.0 0.25---- Si > 8% 20014 AlSi 12
Page 116
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions ALU-Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
DNGG 331 ALU
DNGG 332 ALU
T0001026
T0001010
117
117
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
D N G GShape Clearance Angle Tolerance Insert Type
55° Diamond 0° No rake Pin / Top clamp Double sided
d ± 0.05 m ± 0.08s ± 0.13
LT 05
LT 05
DNGG 331 ALU
DNGG 332 ALU
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
���
ISO standard inserts with extreme and unique positive chip breaker geometry, for Aluminum turning operations. Suitable mostly for external operations but good also for internal operations, Roughing - Finishing operations.
Page 117
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions ALU-Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Pin / Top clamp Double sided
AluminiumGroup Material Brinell
hardnessHB
A max Optimal cutting
No Examples*min max min max
(mm )2
min max d.o.c feedconditionsd.o.c [Inch] Speedfeed [inch/rev]
---- 0.005 0.012 0.0023 4000
---- 0.010 0.197
0.004 0.010 0.0019 20000.02 to 0.12
0.009
---- Recommended to use LT-10 Ampco 25
AISi 6 Cu 4
AISi 12
Si < 4%4% < Si < 8%
Si > 8%
1330
830
AluminiumGroup Material Brinell
hardnessHB
A max Optimal cutting
No Examples*min max min max
(mm )2
min max d.o.c feedconditionsd.o.c [Inch] Speedfeed [inch/rev]
---- 0.005 0.024 0.0031 4000
---- 0.010 0.197
0.004 0.018 0.0025 20000.02 to 0.12
0.013
----
14
Ampco 25
AISi 6 Cu 4
AISi 12
Si < 4%4% < Si < 8%
Si > 8%
1330
830
Recommended to use LT-10
13
15
DNGG 331-ALU
DNGG 332-ALU
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
DNGG 331 ALU
DNGG 332 ALU
���
ALU- Turning
For high Si Aluminum, it is recommended to use DNMG 110404 NN.See cutting conditions bellow.
For high Si Aluminum, it is recommended to use DNMG 110408 NN.See cutting conditions bellow.
0.02 0.19 0.004 0.012 0.001 1300 0.02 to 0.05 0.006---- Si > 8% 65014 AlSi 12
0.50 5.0 0.15 0.50 1.50 400 1.0 to 3.0 0.25---- Si > 8% 20014 AlSi 12
Page 118
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions ALU-Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Shape Clearance Angle Tolerance Insert TypeTriangle 60° 0° No rake Pin / Top clamp
Double sidedd ± 0.05 m ± 0.08s ± 0.13
TNGG 331 ALU T0001105 119 3/8" 3/16" 1/64"
T N G G
LT 05
TNGG 331 ALU
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
���
ISO standard inserts with extreme and unique positive chip breaker geometry, for Aluminum turning operations. Suitable mostly for external operations but good also for internal operations, Roughing - Finishing operations.
Page 119
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions ALU-Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
AluminiumGroup Material Brinell
hardnessHB
A max Optimal cutting
No Examples*min max min max
(mm )2min max d.o.c feed
conditionsd.o.c [Inch] Speedfeed [inch/rev]
---- 0.005 0.012 0.0023 4000
---- 0.010 0.197
0.004 0.010 0.0019 20000.02 to 0.12
0.009
---- Ampco 25
AISi 6 Cu 4
AISi 12
Si < 4%4% < Si < 8%
Si > 8%
1330
830
Recommended to use TNMG 331 NN - LT-10
13
14
15
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
TNGG 331 ALU
TNGG 331-ALU
���
ALU- Turning
For high Si Aluminum, it is recommended to use TNMG 160404 NN.See cutting conditions bellow.
0.008 0.157 0.004 0.012 0.0012 1300 0.02 to 0.05 0.006---- Si > 8% 65014 AlSi 12
Page 120
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining Recommendation Guide - Please see Pg. 8
Machining conditions ALU-Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
V N G GShape Clearance Angle Tolerance Insert Type
0° No rake Pin / Top clamp Double sided
l ± 0.05 m ± 0.16s ± 0.13
121
121
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
VNMG 331 NN
VNMG 332 NN
VNGG 331 ALU
VNGG 332 ALU
LT 05
LT 05
3/8" 3/16" 1/64"
3/8" 3/16" 1/32"
T0001006
T0001032
35° Diamond
��0
ISO standard inserts with extreme and unique positive chip breaker geometry, for Aluminum turning operations. Suitable mostly for external operations but good also for internal operations, Roughing - Finishing operations.
Page 121
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Machining conditions ALU-Turning
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
ALU-Turning
Insert designation Grade l s r Catalog Nr. Page
Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Pin / Top clamp Double sided
AluminiumGroup Material Brinell
hardnessHB
A max Optimal cutting
No Examples*min max min max
(mm )2
min max d.o.c feedconditionsd.o.c [Inch] Speedfeed [inch/rev]
---- 0.005 0.012 0.0023 1'200
---- 0.010 0.236
0.004 0.010 0.0019 20000.02 to 0.12
0.009
----
13
Ampco 25
AISi 6 Cu 4
AISi 12
Si < 4%4% < Si < 8%
Si > 8%
1330
830
Recommended to use VNMG 331 NN - LT-10
AluminiumGroup Material Brinell
hardnessHB
A max Optimal cutting
No Examples*min max min max
(mm )2min max d.o.c feed
conditionsd.o.c [Inch] Speedfeed [inch/rev]
---- 0.005 0.024 0.0031 1'200
---- 0.010 0.236
0.004 0.018 0.0025 20000.02 to 0.12
0.013
----
13
Ampco 25
AISi 6 Cu 4
AISi 12
Si < 4%4% < Si < 8%
Si > 8%
1330
830
Recommended to use VNMG 332 NN - LT-10
VNGG 331-ALU
VNGG 332-ALU
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut
VNGG 331 ALU
VNGG 332 ALU
���
ALU- Turning
For high Si Aluminum, it is recommended to use VNMG 160404 NN.See cutting conditions bellow.
For high Si Aluminum, it is recommended to use VNMG 160408 NN.See cutting conditions bellow.
0.02 0.19 0.004 0.012 0.0012 1300 0.02 to 0.05 0.006---- Si > 8% 65014 AlSi 12
0.02 0.19 0.007 0.017 0.002 1300 0.04 to 0.12 0.010---- Si > 8% 65014 AlSi 12
Page 122
���
True Multi-Mat insersts for real productivity
Aluminium machining like never before...
° Excellent chip control and surface finishing- even in low Silicon Aluminium.
° Excellent toughness & wear resistance characteristics.
° Double the cutting edges, per insert.
° Can handle with ease depth of cut of up to 6 mm.
° True ability to run un-manned in CNC operation.
° Can be mounted on a standard tool-holder.
ISO 2 CUTTING EDGES
1 2
43
1 2
LAMINA 4 CUTTING EDGES
instead of
Page 123
Parting LT - 10 Parting
®MULTI-MAT PARTING INSERTS
���
Parting
Aluminium machining like never before...
° Excellent chip control and surface finishing- even in low Silicon Aluminium.
° Excellent toughness & wear resistance characteristics.
° Double the cutting edges, per insert.
° Can handle with ease depth of cut of up to 6 mm.
° True ability to run un-manned in CNC operation.
° Can be mounted on a standard tool-holder.
ISO 2 CUTTING EDGES
1 2
43
1 2
LAMINA 4 CUTTING EDGES
instead of
Page 124
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Parting
Insert designation Grade W R Catalog Nr. Page
Application Guide Parting Grooving Side Turning Chamfering
Machining Recommendation Guide - Please see Pg. 8
Parting
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Parting
Insert designation Grade W R Catalog Nr. Page
Application Guide Parting Grooving Side Turning Chamfering
GNTX : � CUTTING EDGE - ForSteelandcastIron.GCTX : � CUTTING EDGE - ForStainlessSteel.
G N T XG C T X
Insert Designation Grade
GNTX 2002 NN
GNTX 3003 NN
GCTX 2002 NN
GCTX 3003 NN
GCTX 2002 PP
GCTX 3003 PP
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
126
127
128
129
130
131
LT 10
LT 10
LT 10
LT 10
LT 10
LT 10
GNTX 2002 NN
GNTX 3003 NN
GCTX 2002 NN
GCTX 3003 NN
GCTX 2002 PP
GCTX 3003 PP
T0001468
T0001470
T0001469
T0001471
T0001880
T0001879
2.0mm 0.18mm
3.0mm 0.18mm
3.0mm 0.25mm
3.0mm 0.25mm
3.0mm 0.25mm
3.0mm 0.25mm
Shape Clearance Angle Tolerance Insert TypeN = 0° No rakeC = 7° rake angle
Speciall ± 0.05 m ± 0.16s ± 0.13
"Doge bone"
���
Page 125
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Parting
Insert designation Grade W R Catalog Nr. Page
Application Guide Parting Grooving Side Turning Chamfering
Parting
NN All Purpose Chipbreaker
1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent
Parting
Insert designation Grade W R Catalog Nr. Page
Application Guide Parting Grooving Side Turning Chamfering
GNTX / GCTX
T2001305 RILTPNG-L0.500-2.0 0.500.504.750.0630.75left
T2001306 RILTPNG-R0.500-2.0 0.500.504.750.0630.75right
T2001307 RILTPNG-L0.625-2.0 0.620.624.750.0630.75left
T2001308 RILTPNG-R0.625-2.0 0.620.624.750.0630.75right
D� D� L W Pmax Hand Catalog Nr. Description
T2001310 RILTPNG-L0.625-3.0 0.620.624.750.0940.75left
T2001309 RILTPNG-R0.625-3.0 0.620.624.750.0940.75right
T2001311 RILTPNG-L0.750-3.0 0.750.755.000.0940.98left
T2001312 RILTPNG-R0.750-3.00.750.755.000.0940.98right
T2001311 RILTPNG-L1.000-3.01.001.005.000.0940.98left
T2001312 RILTPNG-R1.000-3.0 1.001.005.000.0940.98right
D� D� L W Pmax Hand Catalog Nr. Description
PARTING TOOL HOLDERS
���
Parting
Page 126
Machining conditions PartingMachining conditionsParting
Insert designation Parting Grooving Side Turning Chamfering
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions PartingMachining conditionsParting
GNTX �00� NN
GNTX 2002 NN
���
Material Group Group Material Examples* Brinell No hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron GG 25to 230
GG 30
GGG 40 210
Nodular Cast IronGGG 50 260
GGG 70 310
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
For Stainless Steel please use GCTX insert.
For Exotic material please use GCTX insert.
feed [inch/rev] Speed
426
6560.002 295
590
4920.001
197
164
361
0.002
0.006
0.006
0.001
0.001 0.003
0.001
0.007
0.006
0.006 295
197
722
262
0.002 0.006 426 623
0.002 0.006 295
2300.001 0.002 98
492
4
5
6
7
8
9
10
11
12
Page 127
Machining conditions PartingMachining conditionsParting Machining conditions PartingMachining conditionsParting
Insert designation Parting Grooving Side Turning Chamfering
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
GNTX �00� NN
GNTX 3003 NN
���
Parting
Material Group Group Material Examples* Brinell No hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
4X5 CrNi 18 9304
210to 250
Austenitic5 X2 CrNiMo 17 2 2
316230
Stainless Steel to 270
6X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel 7 X8 Cr 7
430Annealed
Martensitic8
X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron 9 GG 25to 230
GG 30
GGG 40 210
Nodular Cast Iron 10GGG 50 260
GGG 70 310
Inconel 625
11 Inconel 718 --------
Hastelloy C
12TiAl 6 V4
--------T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
For Stainless Steel please use GCTX insert.
For Exotic material please use GCTX insert.
feed [inch/rev] Speed
426
6560.002 295
590
4920.002
197
164
361
0.002
0.007
0.007
0.002
0.001 0.003
0.002
0.008
0.007
0.007 295
197
722
262
0.003 0.007 426 623
0.003 0.006 295
2300.002 0.003 98
492
Page 128
Machining conditions PartingMachining conditionsParting
Insert designation Parting Grooving Side Turning Chamfering
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions PartingMachining conditionsParting
GCTX �00� NN
GCTX 2002 NN
���
Material Group Group Material Examples* Brinell feed [inch/rev] SpeedNo hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron GG 25to 230
GG 30
GGG 40 210
Nodular Cast IronGGG 50 260
GGG 70 310
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
426
6560.002 295
590
4920.001
197
164
361
0.002
0.006
0.006
0.001
0.001 0.003
0.001
0.007
0.006
0.006 295
197
722
262
558 7540.001 0.004
525 689
295 394
0.001 0.004 492 689
0.001 0.004 197 689
0.002 0.006 426 623
0.002 0.006 295
2300.001 0.002 98
0.001 0.002 82 213
0.001 0.002 92223
223
492
492
0.001 0.004 295
0.03 0.003
0.001 0.003
4
5
6
7
8
9
10
11
12
Page 129
Machining conditions PartingMachining conditionsParting Machining conditions PartingMachining conditionsParting
Insert designation Parting Grooving Side Turning Chamfering
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
GCTX �00� NN
GCTX 3003 NN
���
Parting
Material Group Group Material Examples* Brinell feed [inch/rev] SpeedNo hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron GG 25to 230
GG 30
GGG 40 210
Nodular Cast IronGGG 50 260
GGG 70 310
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
426
6560.002 295
590
4920.002
197
164
361
0.002
0.007
0.007
0.002
0.001 0.003
0.002
0.008
0.007
0.007 295
197
722
262
558 7540.002 0.005
525 689
295 394
0.003 0.005 492 689
0.002 0.005 197 689
0.003 0.007 426 623
0.003 0.006 295
2300.002 0.003 98
0.002 0.003 82 213
0.002 0.003 92223
223
492
492
0.002 0.005 295
0.002 0.003
0.002 0.004
4
5
6
7
8
9
10
11
12
Page 130
Machining conditions PartingMachining conditionsParting
Insert designation Parting Grooving Side Turning Chamfering
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Machining conditions PartingMachining conditionsParting
GCTX �00� PP
GCTX 2002 PP
��0
Material Group Group Material Examples* Brinell feed [inch/rev] SpeedNo hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron GG 25to 230
GG 30
GGG 40 210
Nodular Cast IronGGG 50 260
GGG 70 310
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
426
6560.002 295
590
4920.001
197
164
361
0.002
0.006
0.006
0.001
0.001 0.003
0.001
0.007
0.006
0.006 295
197
722
262
558 7540.001 0.004
525 689
295 394
0.001 0.004 492 689
0.001 0.004 197 689
0.002 0.006 426 623
0.002 0.006 295
2300.001 0.002 98
0.001 0.002 82 213
0.001 0.002 92223
223
492
492
0.001 0.004 295
0.03 0.003
0.001 0.003
4
5
6
7
8
9
10
11
12
Page 131
Machining conditions PartingMachining conditionsParting Machining conditions PartingMachining conditionsParting
Insert designation Parting Grooving Side Turning Chamfering
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
GCTX �00� PP
GCTX 3003 PP
���
Parting
Material Group Group Material Examples* Brinell feed [inch/rev] SpeedNo hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron GG 25to 230
GG 30
GGG 40 210
Nodular Cast IronGGG 50 260
GGG 70 310
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
426
6560.002 295
590
4920.002
197
164
361
0.002
0.007
0.007
0.002
0.001 0.003
0.002
0.008
0.007
0.007 295
197
722
262
558 7540.002 0.005
525 689
295 394
0.003 0.005 492 689
0.002 0.005 197 689
0.003 0.007 426 623
0.003 0.006 295
2300.002 0.003 98
0.002 0.003 82 213
0.002 0.003 92223
223
492
492
0.002 0.005 295
0.002 0.003
0.002 0.004
4
5
6
7
8
9
10
11
12
Page 132
ONLY ONE GRADE
The Lamina Multi-Mat LT-30 Grade for Milling and Drilling can machine most materials with
Only one grade LT-30 Steel Stainless Steel Cast Iron Super Alloys
Example Example Example Example35 NC 6 316L FC400-12 Inconel 718
True Multi-Mat inserts for real productivity
������
Page 133
Steel Stainless Steel Cast Iron Super Alloys
Example Example Example Example35 NC 6 316L FC400-12 Inconel 718
Milling LT - 30 Multi-Mat MillingLT - 05 Aluminium
MULTI-MAT MILLING INSERTS®
®
���
ADKT
AOMT
APKT
APLX
APMT
LDMT
ODMT
ODMW
OFER
OFMT
RDMT
RDMW
SDKT
SEKN
SEKR
SEKT
SNKX
SPKN
SPKR
SPMT
SPUN
TPKN
TPKR
TPUN
ALU-Milling
Drilling
Solid-Mill
Page 134
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Machining Recommendation Guide - Please see Pg. 8
Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 90°
Shoulder MillingSlotting Surfacing
A D K TShape Clearance Angle Tolerance Insert Type
80° Diamond 15° Screw Down Clampingno chip breaker
l ± 0.05 m ± 0.013s ± 0.025
136ADKT 1505 PDTR LT 30 M0001573 15 5,56 90º 15º Right
���
Multi purpose 90° milling insert. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.
ADKT 1505 PDTR
Page 135
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
���
ADKT 1505 PDTR
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.551
0.007
0.013
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.010426
656
Alloy Steel 2230
0.0200.551
0.006590
280 0.009328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.009295
426
High Alloy Steel 3
2800.020
0.394
0.005
0.004
361
320 0.007197
131
328
350 295
262
230
197
0.020
0.394
0.394
0.020
0.020
0.394
0.197
0.118
0.059
0.020
0.551
0.551
0.551
0.551
0.5510.006
0.005
0.013
0.010
0.009
0.009
0.007
0.006
0.007
0.006
0.013
X5 CrNi 18 9304
2100.006 0.010 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.551
0.005 0.009 394 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.551 0.006 0.010 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.551 0.006 0.010 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.551 0.007 0.013 492 722
GG 30 623
GGG 40 210
0.011
656
Nodular Cast IronGGG 50 260 0.020 0.551 0.006 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.394 0.005 0.007 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.394 0.005
0.008 197
T40 0.007 92 131
689
115
0.008
82
131
0.020 0.551 0.01
0.020 0.394
0.020 0.551
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
ADKT
���
Page 136
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Machining Recommendation Guide - Please see Pg. 8
Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
139
Surfacing Insert Lead angle 90°
AOMT 123608 PETR LT 30 M0001640 15 5,56 90º 15º Right
Shoulder MillingSlotting Surfacing
A O M TShape Clearance Angle Tolerance Insert Type
80° Diamond 15° Screw Down Clampingno chip breaker
l ± 0.05 m ± 0.013s ± 0.025
Multi purpose 90° milling insert. Suitable for Roughing to Finishing - Slotting, Shoulder, Face and Ramping down milling operations.
���
Page 137
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
AOMT 123608 PETR
AOMTMaterial Group Group Material Examples* Brinell
No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.433
0.004
0.015
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.433
0.003590
280 0.007328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.003
0.004
361
320 0.006197
131
328
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.157
0.079
0.039
0.020
0.433
0.433
0.433
0.433
0.4330.003
0.003
0.010
0.009
0.007
0.007
0.006
0.006
0.006
0.006
0.009
X5 CrNi 18 9304
2100.004 0.009 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.276
0.004 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.003 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.276 0.003 0.008 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.276 0.003 0.008 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.354 0.004 0.010 492 722
GG 30 623
GGG 40 210
0.009
656
Nodular Cast IronGGG 50 260 0.020 0.354 0.004 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.197 0.003
0.007 197
T40 0.006 92 131
689
115
0.008
82
131
0.020 0.276 0.00
0.020 0.276
0.020 0.276
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
���
Page 138
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 90°
Shoulder MillingSlotting Surfacing
A P K TShape Clearance Angle Tolerance Insert Type
80° Diamond 15° Screw Down Clampingno chip breaker
l ± 0.05 m ± 0.013s ± 0.025
143
143
144
APKT 53 PDTR
APKT 536 ER
APKT 1705 PETR
LT 30
LT 30
LT 30
M0000021
M0000300
M0001810
5/8" 3/16" 90º 15º Right
5/8" 3/16" 3/32 15º Right
17 5,56 2,4 15º Right
���
Multi purpose 90° milling inserts. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.
Page 139
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Screw Down Clampingno chip breaker
APKT 53 PDTR & APKT 536 PDTR
���
APKT
D d L H Ap z Catalog Nr. Description
M2001238 RILT730W-W-D1000/2
M2001239 RILT730W-W-D1250/3
M2001240 RILT730W-W-D1500/3
1.0001.0003.5001.2500.5902
1.2501.0003.7501.2500.5903
1.5001.2504.0001.2500.5904
D d a H Ap z Catalog Nr. Description
M2001242 RILT730M-W-D2000/4
M2001243 RILT730M-W-D2500/5
M2001244 RILT730M-W-D3000/6
M2001245 RILT730M-W-D4000/7
M2001246 RILT730M-W-D5000/8
2.0000.7505/161.7500.590 4
2.5001.0003/82.0000.590 5
3.0001.0003/82.0000.590 6
4.0001.2501/22.0000.5907
5.0001.5005/82.0000.590 8
W=Withcoolant
Screw: RILT-1440Wrench: RILT-5515
Screw: RILT-1240Wrench: RILT-5515
For Diameter �.000
For Diameter �.��0 to �.�00
W=Withcoolant Screw: RILT-1240Wrench: RILT-5615
Page 140
Milling Machining conditions MillingMachining conditionsMilling Machining conditions APKT 1604 PDTR & APKT 160424 PDTR
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.591
0.007
0.013
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.010426
656
Alloy Steel 2230
0.0200.591
0.006590
280 0.009328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.009295
426
High Alloy Steel 3
2800.020
0.472
0.005
0.004
361
320 0.007197
131
328
350 295
262
230
197
0.020
0.472
0.472
0.020
0.020
0.472
0.197
0.118
0.059
0.020
0.591
0.591
0.591
0.591
0.5910.006
0.005
0.013
0.010
0.009
0.009
0.007
0.006
0.007
0.006
0.013
X5 CrNi 18 9304
2100.006 0.010 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.591
0.005 0.009 394 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.591 0.006 0.010 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.591 0.006 0.010 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.591 0.007 0.013 492 722
GG 30 623
GGG 40 210
0.011
656
Nodular Cast IronGGG 50 260 0.020 0.591 0.006 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.472 0.005 0.007 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.472 0.005
0.008 197
T40 0.007 92 131
689
115
0.008
82
131
0.020 0.591 0.01
0.020 0.472
0.020 0.591
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
��0
Page 141
Milling Machining conditions MillingMachining conditionsMilling Machining conditions APKT 1705 PETR
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.591
0.007
0.016
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.014426
656
Alloy Steel 2230
0.0200.591
0.007590
280 0.012328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.013295
426
High Alloy Steel 3
2800.020
0.591
0.006
0.004
361
320 0.011197
131
328
350 295
262
230
197
0.020
0.276
0.591
0.020
0.020
0.276
0.157
0.079
0.039
0.020
0.591
0.591
0.591
0.591
0.5910.007
0.007
0.014
0.013
0.011
0.012
0.010
0.009
0.009
0.008
0.013
X5 CrNi 18 9304
2100.006 0.009 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.354
0.006 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.006 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.354 0.004 0.008 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.354 0.004 0.008 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.354 0.008 0.018 492 722
GG 30 623
GGG 40 210
0.018
656
Nodular Cast IronGGG 50 260 0.020 0.354 0.008 328
0.0090.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.197 0.003
0.007 197
T40 0.006 92 131
689
115
0.008
82
131
0.020 0.354 0.00
0.020 0.354
0.020 0.354
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
APKT
���
Page 142
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
148
148
149
149
Surfacing Insert Lead angle 90°
APLX 1003 PDTR
APLX 100308 PDTR
APLX 100332 PDTR
APLX 100340 PDTR
LT 30
LT 30
LT 30
LT 30
M0000454
M0001151
M0001566
M0001567
10 3,18 90º 15º Right
10 3,18 0,8 15º Right
10 3,18 3,2 15º Right
10 3,18 4,0 15º Right
Shoulder MillingSlotting Surfacing
A P L XShape Clearance Angle Tolerance Insert Type
80° Diamond 15° Screw Down Clampingno chip breaker
l ± 0.05 m ± 0.013s ± 0.025
Multi purpose 90° milling inserts. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.
���
Page 143
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
APLX 1003 PDTR & APLX 100308 PDTR
M2001225 RILT740W-W-D0500/1
M2001227 RILT740W-W-D0625/2
M2001228 RILT740W-W-D0750/3
M2001229 RILT740W-W-D1000/3
M2001231 RILT740W-W-D1000/4
M2001232 RILT740W-W-D1250/5
M2001233 RILT740W-WL-D0625/2
M2001234 RILT740W-WL-D0750/3
M2001235 RILT740W-WL-D1000/4
M2001236 RILT740W-WL-D1250/5
D d L H Ap z Catalog Nr. Description
0.5000.625 3.2501.0000.3541
0.6250.6253.2501.0000.3542
0.7500.7503.5001.2500.3543
1.0001.0003.5001.2500.3543
1.0001.0003.5001.2500.3544
1.2501.0003.7501.2500.3545
0.6250.6256.0001.0000.3542
0.7500.7508.0001.2500.3543
1.0001.0008.0001.2500.3544
1.2501.00010.0001.2500.3545
M2001237 RILT740M-W-D2000/7
D d a H Ap z Catalog Nr. Description
2.0000.7505/61.7500.3547
W=Withcoolant
Screw: RILT-1425Wrench: RILT-5507
Screw: RILT-1225Wrench: RILT-5507
For Diameter 0.�00 to 0.���
For Diameter 0.��0 to �.��0
W=Withcoolant Screw: RILT-1225Wrench: RILT-5607
APLX
���
Page 144
Milling Machining conditions MillingMachining conditionsMilling Machining conditions APLX 1003 PDTR & APLX 100308 PDTR
���
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.354
0.004
0.015
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.354
0.003590
280 0.007328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.003
0.004
361
320 0.006197
131
328
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.157
0.079
0.039
0.020
0.354
0.354
0.354
0.354
0.3540.003
0.003
0.010
0.009
0.007
0.007
0.006
0.006
0.006
0.006
0.009
X5 CrNi 18 9304
2100.004 0.009 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.354
0.004 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.003 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.354 0.003 0.008 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.354 0.003 0.008 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.354 0.004 0.010 492 722
GG 30 623
GGG 40 210
0.009
656
Nodular Cast IronGGG 50 260 0.020 0.354 0.004 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.197 0.003
0.007 197
T40 0.006 92 131
689
115
0.008
82
131
0.020 0.354 0.00
0.020 0.354
0.020 0.354
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
Page 145
Milling Machining conditions MillingMachining conditionsMilling Machining conditions APLX 100332 PDTR & APLX 100340 PDTR
���
APLX
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.354
0.004
0.015
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.354
0.003590
280 0.007328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.003
0.004
361
320 0.006197
131
328
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.157
0.079
0.039
0.020
0.354
0.354
0.354
0.354
0.3540.003
0.003
0.010
0.009
0.007
0.007
0.006
0.006
0.006
0.006
0.009
X5 CrNi 18 9304
2100.004 0.009 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.354
0.004 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.003 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.354 0.003 0.008 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.354 0.003 0.008 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.354 0.004 0.010 492 722
GG 30 623
GGG 40 210
0.009
656
Nodular Cast IronGGG 50 260 0.020 0.354 0.004 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.197 0.003
0.007 197
T40 0.006 92 131
689
115
0.008
82
131
0.020 0.354 0.00
0.020 0.354
0.020 0.354
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
Page 146
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Machining Recommendation Guide - Please see Pg. 8
Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 90°
Shoulder MillingSlotting Surfacing
A P M TShape Clearance Angle Tolerance Insert Type
80° Diamond 15° Screw Down Clampingno chip breaker
l ± 0.05 m ± 0.013s ± 0.025
154
155
156
156
APMT 32 PDTR
APMT 1135 PDTR
APMT 53 PDTR
APMT 532 PDTR
LT 30
LT 30
LT 30
LT 30
M0000663
M0001133
M0001134
M0001733
3/8" 1/8" 90º 15º Right
11 3,52 90º 15º Right
5/8" 3/16" 90º 15º Right
5/8" 3/16" 1/32" 15º Right
Multi purpose 90° milling inserts. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.
���
Page 147
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
���
APMT 32 PDTR
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.335
0.004
0.010
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.335
0.003590
280 0.007328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.003
0.004
361
320 0.006197
131
328
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.157
0.079
0.039
0.020
0.335
0.335
0.335
0.335
0.3350.003
0.003
0.010
0.009
0.007
0.007
0.006
0.006
0.006
0.006
0.010
X5 CrNi 18 9304
2100.004 0.009 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.335
0.004 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.003 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.335 0.003 0.009 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.335 0.003 0.007 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.335 0.004 0.011 492 722
GG 30 623
GGG 40 210
0.010
656
Nodular Cast IronGGG 50 260 0.020 0.335 0.004 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.197 0.003
0.007 197
T40 0.006 92 131
689
115
0.007
82
131
0.020 0.335 0.00
0.020 0.276
0.020 0.335
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
���
APMT
Page 148
Milling Machining conditions MillingMachining conditionsMilling Machining conditions
���
APMT 1135 PDTR
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.394
0.004
0.015
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.394
0.003590
280 0.007328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.003
0.004
361
320 0.006197
131
328
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.157
0.079
0.039
0.020
0.394
0.394
0.394
0.394
0.3940.003
0.003
0.010
0.009
0.007
0.007
0.006
0.006
0.006
0.006
0.009
X5 CrNi 18 9304
2100.004 0.009 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.394
0.004 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.003 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.394 0.003 0.008 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.276 0.003 0.008 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.394 0.004 0.010 492 722
GG 30 623
GGG 40 210
0.009
656
Nodular Cast IronGGG 50 260 0.020 0.394 0.004 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.197 0.003
0.007 197
T40 0.006 92 131
689
115
0.008
82
131
0.020 0.276 0.00
0.020 0.276
0.020 0.394
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
���
Page 149
Milling Machining conditions MillingMachining conditionsMilling Machining conditions APMT 53 PDTR & APMT 532 PDTR
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.591
0.007
0.013
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.010426
656
Alloy Steel 2230
0.0200.591
0.006590
280 0.009328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.009295
426
High Alloy Steel 3
2800.020
0.472
0.005
0.004
361
320 0.007197
131
328
350 295
262
230
197
0.020
0.472
0.472
0.020
0.020
0.472
0.197
0.118
0.059
0.020
0.591
0.591
0.591
0.591
0.5910.006
0.005
0.013
0.010
0.009
0.009
0.007
0.006
0.007
0.006
0.013
X5 CrNi 18 9304
2100.006 0.010 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.591
0.005 0.009 394 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.591 0.006 0.010 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.591 0.006 0.010 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.591 0.007 0.013 492 722
GG 30 623
GGG 40 210
0.011
656
Nodular Cast IronGGG 50 260 0.020 0.591 0.006 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.472 0.005 0.007 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.472 0.005
0.008 197
T40 0.007 92 131
689
115
0.008
82
131
0.020 0.591 0.01
0.020 0.472
0.020 0.591
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
APMT
���
Page 150
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Machining Recommendation Guide - Please see Pg. 8
Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
L D M T
*Availability is subject to special agreament
Surfacing Insert Lead angle 90°
Shape Clearance Angle Tolerance Insert Type80° Diamond 15° Screw Down Clamping
no chip breakerl ± 0.05 m ± 0.013s ± 0.025
157LDMT 1504 PDTR LT 30 M0001772 15 4,76 90º 15º Right
Shoulder MillingSlotting Surfacing
Multi purpose 90° milling insert. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.
��0
Page 151
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
LDMT 1504 PDTR
LDMT
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.551
0.004
0.015
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.551
0.003590
280 0.007328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.003
0.004
361
320 0.006197
131
328
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.157
0.079
0.039
0.020
0.551
0.551
0.551
0.551
0.5510.003
0.003
0.010
0.009
0.007
0.007
0.006
0.006
0.006
0.006
0.009
X5 CrNi 18 9304
2100.004 0.009 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.551
0.004 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.003 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.276 0.003 0.008 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.276 0.003 0.008 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.551 0.004 0.010 492 722
GG 30 623
GGG 40 210
0.009
656
Nodular Cast IronGGG 50 260 0.020 0.551 0.004 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.197 0.003
0.007 197
T40 0.006 92 131
689
115
0.008
82
131
0.020 0.276 0.00
0.020 0.276
0.020 0.551
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
���
Page 152
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
135
Surfacing Insert Lead angle 45°
O D M TShape Clearance Angle Tolerance Insert Type
Octagonal 15° Screw down clampingChip breaker
l ± 0.05 m ± 0.013s ± 0.025
160
161
ODMT 0504 ZZTR
ODMT 060508 TN
LT 30
LT 30
M0000664
M0001104
5 4,76 0,8 Right
6 5,56 0,8 Right
135
135
ChamferingSurfacing
���
Multi purpose 45° milling inserts, with 8 cutting edges. Suitable for Roughing to Finishing - Face milling, Plunging and Ramping down operations.
Page 153
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Screw set: CO6710Key set: CT15
ODMT 060508 TN *Cutters only for ODMT 060508 TN
���
ODMT
D De d a H Ap z Catalog Nr. Description
M2001247 RILT820M-D3000/5
M2001248 RILT820M-D4000/6
M2001249 RILT820M-D5000/8
3.0003.3931.0003/82.0000.157 5
4.0004.3931.2501/22.0000.157 6
5.0005.3931.5005/82.0000.157 8
Page 154
Milling Machining conditions MillingMachining conditionsMilling Machining conditions ODMT 0504 TR
���
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.138
0.009
0.019
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.017492
787
Alloy Steel 2230
0.0200.138
0.011689
280 0.014426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.013295
492
High Alloy Steel 3
2800.020
0.138
0.006
0.006
426
320 0.011197
131
361
350 295
262
230
197
0.020
0.138
0.138
0.020
0.020
0.138
0.118
0.079
0.039
0.020
0.138
0.138
0.138
0.138
0.1380.011
0.006
0.019
0.017
0.014
0.013
0.011
0.009
0.010
0.008
0.019
X5 CrNi 18 9304
2100.009 0.014 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.138
0.007 0.013 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.006 0.011 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.138 0.007 0.014 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.138 0.007 0.014 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.138 0.008 0.020 558 820
GG 30 689
GGG 40 210
0.019
689
Nodular Cast IronGGG 50 260 0.020 0.138 0.007 394
0.0100.020 0.118 0.006 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.138 0.006 0.012 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.138 0.006
0.014 197
T40 0.011 92 131
754
115
0.011
82
131
0.020 0.138 0.01
0.020 0.138
0.020 0.138
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
Page 155
Milling Machining conditions MillingMachining conditionsMilling Machining conditions ODMT 060508 TN
���
ODMT
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.157
0.009
0.020
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.019492
787
Alloy Steel 2230
0.0200.157
0.008689
280 0.018426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.017295
492
High Alloy Steel 3
2800.020
0.157
0.006
0.006
426
320 0.015197
131
361
350 295
262
230
197
0.020
0.157
0.157
0.020
0.020
0.157
0.118
0.079
0.039
0.020
0.157
0.157
0.157
0.157
0.1570.008
0.006
0.020
0.019
0.018
0.017
0.015
0.009
0.010
0.008
0.020
X5 CrNi 18 9304
2100.007 0.014 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.157
0.007 0.013 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.006 0.011 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.157 0.008 0.015 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.157 0.008 0.015 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.157 0.009 0.020 558 820
GG 30 689
GGG 40 210
0.018
689
Nodular Cast IronGGG 50 260 0.020 0.157 0.007 394
0.0100.020 0.118 0.006 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.157 0.006 0.013 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.157 0.007
0.013 197
T40 0.011 92 131
754
115
0.013
82
131
0.020 0.157 0.01
0.020 0.157
0.020 0.157
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
Page 156
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
135
Surfacing Insert Lead angle 45°
ChamferingSurfacing
O D M WShape Clearance Angle Tolerance Insert Type
Octagonal 15° Screw down clampingChip breaker
l ± 0.05 m ± 0.013s ± 0.025
164ODMW 0�0�0� TN LT 30 M0000451 6 5,56 0,8 Right
135
135
���
Multi purpose 45° milling insert, with 8 cutting edges and flat rake surface. Designed for materials that generate short chips. Suitable for Roughing to Finishing - Face milling, Plunging and Ramping down operations.
Page 157
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page Screw set: CO6710Key set: CT15
���
ODMW
Screw set: CO6710Key set: CT15
D De d a H Ap z Catalog Nr. Description
M2001247 RILT820M-D3000/5
M2001248 RILT820M-D4000/6
M2001249 RILT820M-D5000/8
3.0003.3931.0003/82.0000.157 5
4.0004.3931.2501/22.0000.157 6
5.0005.3931.5005/82.0000.157 8
ODMW 060508 TN
Page 158
Milling Machining conditions MillingMilling Machining conditions ODMW 060508 TN
���
Material Group Group Material Examples* Brinell d.o.c [inch] feed [inch/rev] Vc [SFM]No hardness min max min max min max
Ck15, Ck451020, 1045
150 1148
Low Carbon Steel 1 180
0.157
0.011
0.020
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.019492
787
Alloy Steel 2230
0.0200.157
0.010689
280 0.017426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.015295
492
High Alloy Steel 3
2800.020
0.157
0.009
0.006
426
320 0.013197
131
361
350 295
262
230
197
0.020
0.157
0.157
0.020
0.020
0.157
0.118
0.079
0.039
0.020
0.157
0.157
0.157
0.157
0.1570.010
0.009
0.020
0.019
0.017
0.015
0.013
0.009
0.010
0.008
0.020
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.157 0.010 0.024 558 820
GG 30 689
GGG 40 210
0.020
689
Nodular Cast IronGGG 50 260 0.020 0.157 0.009 394
0.0100.020 0.118 0.006 98
558
GGG 70 310 492
197
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
ODMW inserts are not recommended for Stainless Steel
ODMW inserts are not recommended for Exotic materials
4
5
6
7
8
9
10
11
12
Page 159
Milling Machining conditions MillingMilling Machining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Machining Recommendation Guide - Please see Pg. 8
Surfacing Insert Lead angle 43°
ChamferingSurfacing
O F E RShape Clearance Angle Tolerance Insert TypeOctagonal 25° Screw down clamping
with chip breakerl ± 0.025 m ± 0.025s ± 0.025
167OFER 070405 TN LT 30 M0000033 7 4,76 0,8 Right
135
135
���
OFER
Multi purpose 45° milling insert, with 8 cutting edges and flat rake surface. Suitable for Roughing to Finishing - Face milling, Plunging and Ramping down operations.
Page 160
Milling CuttersMilling Cutters MillingMachining conditionsOFER 070405 TN
��0
D De d a H Ap z Catalog Nr. Description
M2001250 RILT880M-W-D3000/5
M2001251 RILT880M-W-D4000/6
M2001252 RILT880M-W-D5000/8
3.0003.3931.0003/82.0000.196 5
4.0004.3931.2501/22.0000.196 6
5.0005.3931.5005/82.0000.196 8
W=Withcoolant Clamp screw: RILT-1048LWrench: RILT-5004
Page 161
Milling CuttersMilling Cutters MillingMachining conditionsOFER 070405 TN
���
OFER
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.157
0.007
0.013
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.012492
787
Alloy Steel 2230
0.0200.157
0.006689
280 0.012426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.010295
492
High Alloy Steel 3
2800.020
0.157
0.005
0.006
426
320 0.010197
131
361
350 295
262
230
197
0.020
0.157
0.157
0.020
0.020
0.157
0.118
0.079
0.039
0.020
0.157
0.157
0.157
0.157
0.1570.006
0.005
0.013
0.012
0.012
0.010
0.010
0.009
0.010
0.008
0.013
X5 CrNi 18 9304
2100.007 0.013 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.197
0.006 0.011 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.010 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.197 0.005 0.013 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.197 0.005 0.013 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.197 0.006 0.016 558 820
GG 30 689
GGG 40 210
0.013
689
Nodular Cast IronGGG 50 260 0.020 0.197 0.005 394
0.0100.020 0.118 0.006 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.138 0.005 0.011 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.138 0.005
0.011 197
T40 0.000 92 131
754
115
0.010
82
131
0.020 0.197 0.00
0.020 0.138
0.020 0.197
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
Page 162
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 43°
O F M TShape Clearance Angle Tolerance Insert Type
Octagonal 15° Screw down clampingChip breaker
l ± 0.05 m ± 0.013s ± 0.025
170
170
171
OFMT 05T305 TN
OFMT 050405 TR
OFMT 070405 TN
LT 30
LT 30
LT 30
M0000591
M0000034
M0000592
5 3,97 0,8 Right
5 4,76 0,8 Right
7 4,76 0,8 Right
135
135
ChamferingSurfacing
���
Multi purpose 45° milling inserts, with 8 cutting edges and flat rake surface. Suitable for Roughing to Finishing - Face milling, Plunging and Ramping down operations.
Page 163
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Screw down clampingChip breaker
���
OFMT 05T305 TN
OFMT 070405 TN
���
OFMT
D De d a H Ap z Catalog Nr. Description
M2001253 RILT800M-W-D2000/4
M2001254 RILT800M-W-D3000/6
M2001255 RILT800M-W-D4000/7
M2001256 RILT800M-W-D3000/8
2.0002.275 0.7505/161.7500.137 4
3.0003.275 1.0003/82.0000.137 6
4.0004.275 1.2501/22.0000.137 7
5.0005.275 1.5005/82.0000.137 8
D De d a H Ap z Catalog Nr. Description
M2001257 RILT810M-D3000/6
M2001258 RILT810M-D4000/7
M2001259 RILT810M-D5000/8
3.0003.4721.0003/82.0000.196 6
4.0004.4721.2501/22.0000.196 7
5.0005.4721.5005/82.0000.196 8
W=Withcoolant Screw: RILT-1250Wrench: RILT-5620
W=Withcoolant Screw: RILT-1240Wrench: RILT-5615
Page 164
Milling Machining conditions MillingMachining conditionsMilling Machining conditions OFMT 05T305 TN & OFMT 050405 TR
���
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.138
0.009
0.019
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.017492
787
Alloy Steel 2230
0.0200.138
0.011689
280 0.014426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.013295
492
High Alloy Steel 3
2800.020
0.138
0.006
0.006
426
320 0.011197
131
361
350 295
262
230
197
0.020
0.138
0.138
0.020
0.020
0.138
0.118
0.079
0.039
0.020
0.138
0.138
0.138
0.138
0.1380.011
0.006
0.019
0.017
0.014
0.013
0.011
0.009
0.010
0.008
0.019
X5 CrNi 18 9304
2100.009 0.014 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.138
0.007 0.013 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.006 0.011 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.138 0.007 0.014 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.138 0.007 0.014 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.138 0.008 0.020 558 820
GG 30 689
GGG 40 210
0.019
689
Nodular Cast IronGGG 50 260 0.020 0.138 0.007 394
0.0100.020 0.118 0.006 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.138 0.006 0.012 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.138 0.006
0.014 197
T40 0.011 92 131
754
115
0.011
82
131
0.020 0.138 0.01
0.020 0.138
0.020 0.138
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
Page 165
Milling Machining conditions MillingMachining conditionsMilling Machining conditions OFMT 070405 TN
���
OFMT
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.177
0.009
0.019
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.017492
787
Alloy Steel 2230
0.0200.177
0.011689
280 0.014426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.013295
492
High Alloy Steel 3
2800.020
0.157
0.006
0.006
426
320 0.011197
131
361
350 295
262
230
197
0.020
0.157
0.157
0.020
0.020
0.157
0.118
0.079
0.039
0.020
0.177
0.177
0.177
0.177
0.1770.011
0.006
0.019
0.017
0.014
0.013
0.011
0.009
0.010
0.008
0.019
X5 CrNi 18 9304
2100.009 0.014 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.177
0.007 0.013 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.006 0.011 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.177 0.007 0.014 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.177 0.007 0.014 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.177 0.008 0.020 558 820
GG 30 689
GGG 40 210
0.019
689
Nodular Cast IronGGG 50 260 0.020 0.157 0.007 394
0.0100.020 0.118 0.006 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.157 0.006 0.012 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.157 0.006
0.014 197
T40 0.011 92 131
754
115
0.011
82
131
0.020 0.177 0.01
0.020 0.177
0.020 0.177
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
Page 166
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 90°
CopyingSurfacing Mould-Milling
R D M TShape Clearance Angle Tolerance Insert TypeRound 15º Screw down clamping
chip breakerll ± 0.05 s ± 0.13
175
176
177
177
178
178
RDMT 0602 MO
RDMT 0803 MO
RDMT 1003 MO
RDMT 10T3 MO
RDMT 1204 MO
RDMT 12T3 MO
LT 30
LT 30
LT 30
LT 30
LT 30
LT 30
M0000035
M0000037
M0001875
M0000038
M0000039
M0001876
6 2,38 3 Neutral
8 3,18 4 Neutral
10 3,18 5 Neutral
10 3,97 5 Neutral
12 4,76 6 Neutral
12 3,97 6 Neutral
���
Multi purpose Round inserts. Suitable for Roughing to Semi-finishing Copying of 3D surfaces and Face milling operations.
Page 167
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Screw down clampingchip breaker
RDMT 1204 MO
���
RDMT 0602 MO
RDMT 0803 MO
���
RDMT
M2001260 RILT060W-D0750/3
M2001261 RILT060W-D1000/3
D d L H Ap z Catalog Nr. Description
0.7500.7503.5001.2500.1183
1.0001.0003.5001.2500.1183
M2001262 RILT080W-D1000/3
M2001263 RILT080W-D1250/3
D d L H Ap z Catalog Nr. Description
1.0001.0003.5001.2500.1573
1.2501.0003.7501.2500.1573
M2001264 RILT100W-D1000/3
M2001265 RILT100W-D1250/3
D d L H Ap z Catalog Nr. Description
1.0001.0003.5001.2500.1963
1.2501.0003.7501.2500.1963
M2001266 RILT120M-W-D1500/3
M2001267 RILT120M-W-D2000/4
M2001268 RILT120M-W-D2500/5
M2001269 RILT120M-W-D3000/6
M2001270 RILT120M-W-D4000/7
D d a H Ap z Catalog Nr. Description
1.5000.5000.2591.7500.2363
2.0000.7505/161.7500.2364
2.5001.0003/82.0000.2365
3.0001.0003/82.0000.2366
4.0001.2501/22.0000.2367
W=Withcoolant Screw: RILT-1425Wrench: RILT-5507
Screw: RILT-1440Wrench: RILT-5515For Diameter �.000
W=Withcoolant Screw: RILT-1240Wrench: RILT-5615 Clamp screw: RILT-1025Wrench: RILT-5003
RDMT 10T3 MO
Page 168
Milling Machining conditions MillingMachining conditionsMilling Machining conditions RDMT 0602 MO
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.079
0.007
0.016
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.016492
787
Alloy Steel 2230
0.0200.079
0.006689
280 0.012426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.013295
492
High Alloy Steel 3
2800.020
0.079
0.005
0.005
426
320 0.011197
131
361
350 295
262
230
197
0.020
0.059
0.079
0.020
0.008
0.059
0.031
0.020
0.020
0.020
0.079
0.059
0.079
0.079
0.0590.005
0.005
0.014
0.013
0.010
0.012
0.010
0.008
0.009
0.007
0.013
X5 CrNi 18 9304
2100.006 0.011 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.079
0.005 0.010 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.009 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.079 0.006 0.010 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.079 0.006 0.010 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.079 0.004 0.018 558 820
GG 30 689
GGG 40 210
0.014
689
Nodular Cast IronGGG 50 260 0.020 0.079 0.004 394
0.0080.008 0.020 0.004 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.059 0.005 0.009 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.059 0.005
0.010 197
T40 0.007 92 131
754
115
0.010
82
131
0.020 0.079 0.01
0.020 0.059
0.020 0.079
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
���
Page 169
Milling Machining conditions MillingMachining conditionsMilling Machining conditions RDMT 0803 M0
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.118
0.008
0.020
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.018492
787
Alloy Steel 2230
0.0200.118
0.007689
280 0.015426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.016295
492
High Alloy Steel 3
2800.020
0.079
0.005
0.005
426
320 0.014197
131
361
350 295
262
230
197
0.020
0.059
0.079
0.020
0.008
0.059
0.039
0.020
0.020
0.020
0.098
0.059
0.098
0.079
0.0590.006
0.005
0.019
0.016
0.014
0.015
0.013
0.010
0.011
0.009
0.017
X5 CrNi 18 9304
2100.006 0.014 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.118
0.005 0.013 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.012 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.098 0.006 0.012 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.098 0.006 0.012 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.118 0.004 0.020 558 820
GG 30 689
GGG 40 210
0.018
689
Nodular Cast IronGGG 50 260 0.020 0.098 0.004 394
0.0100.008 0.020 0.005 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.079 0.005 0.011 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.079 0.005
0.013 197
T40 0.010 92 131
754
115
0.012
82
131
0.020 0.098 0.01
0.020 0.079
0.020 0.098
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
RDMT
���
Page 170
Milling Machining conditions MillingMachining conditionsMilling Machining conditions RDMT 1003 MO & RDMT 10T3 MO
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.118
0.009
0.023
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.020492
787
Alloy Steel 2230
0.0200.118
0.008689
280 0.017426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.019295
492
High Alloy Steel 3
2800.020
0.079
0.007
0.005
426
320 0.016197
131
361
350 295
262
230
197
0.020
0.059
0.079
0.020
0.008
0.059
0.039
0.020
0.020
0.020
0.098
0.059
0.098
0.079
0.0590.008
0.007
0.020
0.019
0.016
0.017
0.015
0.011
0.013
0.010
0.018
X5 CrNi 18 9304
2100.007 0.015 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.118
0.006 0.014 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.013 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.098 0.006 0.014 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.098 0.006 0.014 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.118 0.007 0.024 558 820
GG 30 689
GGG 40 210
0.020
689
Nodular Cast IronGGG 50 260 0.020 0.098 0.007 394
0.0130.008 0.020 0.005 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.079 0.006 0.013 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.079 0.007
0.014 197
T40 0.011 92 131
754
115
0.014
82
131
0.020 0.098 0.01
0.020 0.079
0.020 0.098
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
��0
Page 171
Milling Machining conditions MillingMachining conditionsMilling Machining conditions RDMT 1204 M0 & RDMT 12T3 M0
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.118
0.011
0.028
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.026492
787
Alloy Steel 2230
0.0200.118
0.010689
280 0.020426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.022295
492
High Alloy Steel 3
2800.020
0.079
0.008
0.007
426
320 0.020197
131
361
350 295
262
230
197
0.020
0.059
0.079
0.020
0.020
0.059
0.059
0.039
0.020
0.020
0.098
0.059
0.098
0.079
0.0590.009
0.008
0.026
0.022
0.020
0.020
0.019
0.013
0.015
0.012
0.020
X5 CrNi 18 9304
2100.008 0.018 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.118
0.007 0.016 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.006 0.015 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.098 0.007 0.016 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.098 0.007 0.016 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.118 0.008 0.031 558 820
GG 30 689
GGG 40 210
0.024
689
Nodular Cast IronGGG 50 260 0.020 0.098 0.008 394
0.0120.012 0.039 0.006 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.079 0.007 0.014 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.079 0.008
0.015 197
T40 0.012 92 131
754
115
0.016
82
131
0.020 0.098 0.01
0.020 0.079
0.020 0.098
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
RDMT
���
Page 172
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 90°
CopyingSurfacing Mold-Milling
R D M WShape Clearance Angle Tolerance Insert TypeRound 15º Screw down clamping
chip breakerll ± 0.05 s ± 0.13
181RDMW �0T� MO LT 30 M000155010 3,97 5 Neutral
Multi purpose Round insert, with flat rake surface, designed for hard materials. Suitable for Rou-ghing to Semi-finishing Copying of 3D surfaces and Face milling operations.
���
Page 173
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
RDMW 10T3 M0
M2001264 RILT100W-D1000/3
M2001265 RILT100W-D1250/3
D d L H Ap z Catalog Nr. Description
1.0001.0003.5001.2500.1963
1.2501.0003.7501.2500.1963
Screw: RILT-1440Wrench: RILT-5515For Diameter �.000
RDMW
���
Page 174
Milling Machining conditions MillingMilling Machining conditions RDMW 10T3 M0
Material Group Group Material Examples* Brinell d.o.c [inch] feed [inch/rev] Vc [SFM]No hardness min max min max min max
Ck15, Ck451020, 1045
150 1148
Low Carbon Steel 1 180
0.118
0.009
0.023
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.020492
787
Alloy Steel 2230
0.0200.118
0.008689
280 0.017426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.019295
492
High Alloy Steel 3
2800.020
0.079
0.008
0.008
426
320 0.016197
131
361
350 295
262
230
197
0.020
0.059
0.079
0.020
0.012
0.059
0.039
0.020
0.020
0.020
0.098
0.059
0.098
0.079
0.0590.008
0.008
0.020
0.019
0.016
0.017
0.015
0.014
0.014
0.012
0.018
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.118 0.007 0.024 558 820
GG 30 689
GGG 40 210
0.020
689
Nodular Cast IronGGG 50 260 0.020 0.098 0.007 394
0.0130.008 0.020 0.005 98
558
GGG 70 310 492
197
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
RDMW inserts are not recommended for Stainless Steel
RDMW inserts are not recommended for Exotic materials
4
5
6
7
8
9
10
11
12
���
Page 175
Milling Machining conditions MillingMilling Machining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Machining Recommendation Guide - Please see Pg. 8
Surfacing Insert Lead angle 45°
ChamferingSurfacing
S D K TShape Clearance Angle Tolerance Insert TypeSquare 90° 15º Screw down clamping
chip breakerl ± 0.08 m ± 0.013s ± 0.025
184SDKT 43 AETN LT 30 M0000171 1/2" 3/16" 45º 20º Neutral
90°
Multi purpose 45° milling insert, designed for high depths of cut. Suitable for Roughing to Finishing - Face, Plunging and Ramping down milling operations.
SDKT
���
Page 176
Milling CuttersMilling Cutters MillingMachining conditionsSDKT 43 AETN
M2001271 RILT670M-W-D2000/4
M2001272 RILT670M-W-D3000/5
M2001273 RILT670M-W-D4000/6
M2001274 RILT670M-W-D5000/7
D De d a H Ap z Catalog Nr. Description
2.0002.511 0.7505/161.7500.236 4
3.0003.511 1.0003/82.0000.236 5
4.0004.511 1.2501/22.0000.236 6
5.0005.511 1.5005/82.0000.236 7
W=Withcoolant Screw: RILT-1550Wrench: RILT-5620
���
Page 177
Milling CuttersMilling Cutters MillingMachining conditions
SDKT
SDKT 43 AFTN
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.276
0.008
0.019
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.018492
787
Alloy Steel 2230
0.0200.276
0.007689
280 0.016426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.017295
492
High Alloy Steel 3
2800.020
0.276
0.006
0.006
426
320 0.015197
131
361
350 295
262
230
197
0.020
0.276
0.276
0.020
0.012
0.276
0.197
0.118
0.059
0.020
0.276
0.276
0.276
0.276
0.2760.007
0.006
0.019
0.018
0.016
0.017
0.015
0.013
0.014
0.011
0.019
X5 CrNi 18 9304
2100.007 0.014 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.276
0.006 0.013 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.011 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.276 0.007 0.014 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.276 0.006 0.014 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.276 0.007 0.019 558 820
GG 30 689
GGG 40 210
0.017
689
Nodular Cast IronGGG 50 260 0.020 0.276 0.006 394
0.0130.012 0.118 0.006 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.006 0.011 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.197 0.007
0.013 197
T40 0.011 92 131
754
115
0.011
82
131
0.020 0.118 0.01
0.020 0.197
0.020 0.197
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
���
Page 178
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 45°
ChamferingSurfacing
S E K NShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Clamping
No chip breakerl ± 0.08 m ± 0.013s ± 0.025
SEKN �� AFTN
SEKN �� AFTN
SEKN �� AFTN
LT30
LT30
LT30
M0000041
M0000042
M0000450
���
���
���
1/2" 3/32" 45º 25º Neutral
1/2" 3/16" 45º 25º Neutral
5/8"3/16" 45º 25º Neutral
90°
Multi purpose 45° milling inserts, designed for high depths of cut. Suitable for Roughing to Finishing - Face, Plunging and Ramping down milling operations.
���
Page 179
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
SEKN
SEKN 42 AFTN
M2001275 RILT550M-D2000/4
M2001276 RILT550M-D3000/5
M2001277 RILT550M-D4000/6
M2001278 RILT550M-D5000/7
M2001279 RILT550M-D6000/7
D De d a H Ap z Catalog Nr. Description
2.0002.511 0.7505/161.7500.236 4
3.0003.511 1.0003/82.0000.236 6
4.0004.511 1.2501/22.0000.236 6
5.0005.511 1.5005/82.0000.236 7
6.0006.511 1.5005/82.0000.236 8
W=Withcoolant Clamp screw: RILT-1006LWrench: RILT-5004
Washer: RILT-2063
���
Page 180
Milling Machining conditions MillingMachining conditionsMilling Machining conditions SEKN 42 AFTN & SEKN 43 AFTN
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.276
0.008
0.013
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.012492
787
Alloy Steel 2230
0.0200.276
0.008689
280 0.012426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.010295
492
High Alloy Steel 3
2800.020
0.276
0.006
0.005
426
320 0.010197
131
361
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.197
0.118
0.059
0.020
0.276
0.276
0.276
0.276
0.2760.008
0.006
0.013
0.012
0.012
0.010
0.010
0.009
0.009
0.008
0.013
X5 CrNi 18 9304
2100.007 0.013 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.276
0.006 0.011 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.010 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.276 0.005 0.013 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.276 0.005 0.013 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.276 0.006 0.016 558 820
GG 30 689
GGG 40 210
0.013
689
Nodular Cast IronGGG 50 260 0.020 0.276 0.005 394
0.0090.020 0.118 0.005 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.005 0.011 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.197 0.005
0.013 197
T40 0.011 92 131
754
115
0.011
82
131
0.020 0.197 0.00
0.020 0.197
0.020 0.197
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
��0
Page 181
Milling Machining conditions MillingMachining conditionsMilling Machining conditions SEKN 53 AFTN
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.354
0.008
0.020
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.019492
787
Alloy Steel 2230
0.0200.354
0.008689
280 0.018426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.017295
492
High Alloy Steel 3
2800.020
0.354
0.006
0.005
426
320 0.015197
131
361
350 295
262
230
197
0.020
0.354
0.354
0.020
0.020
0.354
0.197
0.118
0.059
0.020
0.354
0.354
0.354
0.354
0.3540.008
0.006
0.020
0.019
0.018
0.017
0.015
0.011
0.013
0.010
0.020
X5 CrNi 18 9304
2100.010 0.014 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.276
0.009 0.013 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.007 0.011 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.354 0.009 0.015 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.354 0.007 0.015 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.354 0.010 0.024 558 820
GG 30 689
GGG 40 210
0.020
689
Nodular Cast IronGGG 50 260 0.020 0.354 0.007 394
0.0110.020 0.118 0.005 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.276 0.007 0.013 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.276 0.007
0.013 197
T40 0.011 92 131
754
115
0.013
82
131
0.020 0.354 0.01
0.020 0.276
0.020 0.276
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
SEKN
���
Page 182
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 45°
ChamferingSurfacing
S E K RShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Clamping
chip breakerl ± 0.08 m ± 0.013s ± 0.025
SEKR �� AFTN
SEKR �� AFTN
LT30
LT30
M0000043
M0000044
���
���
1/2" 3/32" 45º 25º Neutral
1/2" 3/16" 45º 25º Neutral
90°
Multi purpose 45° milling inserts, designed for high depths of cut and materials that generate long chips. Suitable for Roughing to Finishing - Face, Plunging and Ramping down milling operations.
���
Page 183
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
SEKR
SEKR 42 AFTN
M2001275 RILT550M-D2000/4
M2001276 RILT550M-D3000/5
M2001277 RILT550M-D4000/6
M2001278 RILT550M-D5000/7
M2001279 RILT550M-D6000/7
D De d a H Ap z Catalog Nr. Description
2.0002.511 0.7505/161.7500.236 4
3.0003.511 1.0003/82.0000.236 6
4.0004.511 1.2501/22.0000.236 6
5.0005.511 1.5005/82.0000.236 7
6.0006.511 1.5005/82.0000.236 8
W=Withcoolant Clamp screw: RILT-1006LWrench: RILT-5004
Washer: RILT-2063
���
Page 184
Milling Machining conditions MillingMilling Machining conditions SEKR 42 AFTN & SEKR 42 AFTN
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.276
0.009
0.013
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.012492
787
Alloy Steel 2230
0.0200.276
0.008689
280 0.012426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.010295
492
High Alloy Steel 3
2800.020
0.197
0.006
0.005
426
320 0.010197
131
361
350 295
262
230
197
0.020
0.197
0.197
0.020
0.020
0.197
0.197
0.118
0.059
0.020
0.276
0.276
0.276
0.276
0.2760.008
0.006
0.013
0.012
0.012
0.010
0.010
0.009
0.009
0.008
0.013
X5 CrNi 18 9304
2100.007 0.013 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.276
0.006 0.011 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.010 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.276 0.007 0.013 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.276 0.005 0.013 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.276 0.006 0.013 558 820
GG 30 689
GGG 40 210
0.011
689
Nodular Cast IronGGG 50 260 0.020 0.197 0.005 394
0.0090.020 0.118 0.005 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.005 0.009 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.197 0.005
0.011 197
T40 0.011 92 131
754
115
0.009
82
131
0.020 0.276 0.00
0.020 0.197
0.020 0.197
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
���
Page 185
Milling Machining conditions MillingMilling Machining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Machining Recommendation Guide - Please see Pg. 8
Surfacing Insert Lead angle 45°
ChamferingSurfacing
S E K TShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Screw down clamping
chip breakerl ± 0.08 m ± 0.013s ± 0.025
194
194
SEKT 4(2.5) AGSN
SEKT 43 AFTN
LT 30
LT 30
M0000455
M0000045
1/2" 5/32" 45º 30º Neutral
1/2" 3/16" 45º 25º Neutral
90°
Multi purpose 45° milling inserts, designed for high depths of cut. Suitable for Roughing to Finishing - Face, Plunging and Ramping down milling operations.
���
SEKT
Page 186
Milling CuttersMilling Cutters MillingMachining conditionsSEKT 43 AFTN
M2001280 RILT600M-D2000/4
M2001281 RILT600M-D2500/5
M2001282 RILT600M-D3000/6
M2001283 RILT600M-D4000/6
M2001284 RILT600M-D5000/7
D De d a H Ap z Catalog Nr. Description
2.0002.511 0.7503/81.7500.236 4
2.5003.011 1.0003/82.0000.236 5
3.0003.511 1.2501/22.0000.236 6
4.0004.511 1.5005/82.0000.236 6
5.0005.511 1.5005/82.0000.236 7
W=Withcoolant Screw: RILT-1550Wrench: RILT-5620
���
Page 187
Milling CuttersMilling Cutters MillingMachining conditions
SEKT
SEKT 4(2.5) AGSN & SEKT 43 AFTN
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.276
0.008
0.019
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.018492
787
Alloy Steel 2230
0.0200.276
0.007689
280 0.016426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.017295
492
High Alloy Steel 3
2800.020
0.276
0.006
0.006
426
320 0.015197
131
361
350 295
262
230
197
0.020
0.276
0.276
0.020
0.012
0.276
0.197
0.118
0.059
0.020
0.276
0.276
0.276
0.276
0.2760.007
0.006
0.019
0.018
0.016
0.017
0.015
0.013
0.014
0.011
0.019
X5 CrNi 18 9304
2100.007 0.014 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.276
0.006 0.013 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.011 230 492
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.276 0.007 0.014 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.276 0.006 0.014 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.276 0.007 0.019 558 820
GG 30 689
GGG 40 210
0.017
689
Nodular Cast IronGGG 50 260 0.020 0.276 0.006 394
0.0130.012 0.118 0.006 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.006 0.011 92 131
Hastelloy C 197
TiAl 6 V4-------- 0.020 0.197 0.007
0.013 197
T40 0.011 92 131
754
115
0.011
82
131
0.020 0.118 0.01
0.020 0.197
0.020 0.197
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
SEKT
���
Page 188
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Exclusive and unique design insert with 8 cutting edges for 45° and true 90°. Suitable for general purpose milling including Slotting, Square shoulder, Facing and Ramping down operations.
ChamferingSurfacing
S N K XShape Clearance Angle Tolerance Insert TypeSquare 90° l ± 0.08 m ± 0.013
s ± 0.025
SNKX 0�T�-�0°
SNKX 0�T�-��°
LT30
LT30
M0001986
M0001984
���
���
09 3,18 90º 25º Neutral
09 3,18 45º 25º Neutral
90°
0° No rake Pin / Top clamp Double sided
Sholder-Milling
���
Page 189
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
SNKX
SNKX 09T3-90°
W=Withcoolant Screw set: VT25Key set: BT08
M2001987 LT990W-D25/3 25 25 100 46 5 3
M2002070 LT990W-D32/4 32 32 110 50 5 4
M2002072 LT990M-W-D40/5 40 16 40 5 5
M2002073 LT990M-W-D50/6 50 22 40 5 6
M2002074 LT990M-W-D63/8 63 22 40 5 8
Catalog Nr. Description
D d H Ap z Catalog Nr. Description
D d L H Ap z
W=Withcoolant Screw set: VT25Key set: BT08
M2002075 LT945W-D25/3 25 25 100 46 5 3
M2002076 LT945W-D32/4 32 32 110 50 5 4
M2001988 LT945M-W-D40/5 40 16 40 5 5
M2002077 LT945M-W-D50/6 50 22 40 5 6
M2002078 LT945M-W-D63/8 63 22 40 5 8
Catalog Nr. Description
D d H Ap z Catalog Nr. Description
D d L H Ap z
SNKX 09T3-45°
���
Page 190
Milling Machining conditions MillingMachining conditionsMilling Machining conditions SNKX 09T3-90°
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180 0.004
0.010
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.020 0.003590
280 0.007328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.118
0.003
0.004
361
320 0.006197
131
328
350 295
262
230
197
0.020
0.118
0.118
0.020
0.020
0.118
0.079
0.059
0.039
0.020
0.118
0.118
0.1180.003
0.003
0.010
0.009
0.007
0.007
0.006
0.006
0.006
0.006
0.010
X5 CrNi 18 9304
2100.004 0.009 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.060
0.004 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.003 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.060 0.003 0.009 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.060 0.003 0.007 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.118 0.004 0.011 492 722
GG 30 623
GGG 40 210
0.010
656
Nodular Cast IronGGG 50 260 0.020 0.118 0.004 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.060 0.003 0.006 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.060 0.003
0.007 197
T40 0.006 92 131
689
115
0.007
82
131
0.020 0.060 0.00
0.020 0.060
0.020 0.060
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
0.060
0.060
0.060
0.060
��0
Page 191
Milling Machining conditions MillingMachining conditionsMilling Machining conditions SNKX 09T3-45°
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.118
0.006
0.012
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.011426
656
Alloy Steel 2230
0.0200.118
0.004590
280 0.010328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.010295
426
High Alloy Steel 3
2800.020
0.118
0.004
0.006
361
320 0.009197
131
328
350 295
262
230
197
0.020
0.118
0.118
0.020
0.020
0.118
0.079
0.059
0.039
0.020
0.118
0.118
0.118
0.118
0.1180.004
0.004
0.012
0.011
0.010
0.010
0.009
0.008
0.009
0.008
0.012
X5 CrNi 18 9304
2100.006 0.012 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.118
0.006 0.011 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.004 0.010 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.118 0.004 0.012 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.118 0.004 0.010 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.118 0.006 0.013 492 722
GG 30 623
GGG 40 210
0.012
656
Nodular Cast IronGGG 50 260 0.020 0.118 0.006 328
0.0080.020 0.118 0.006 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.118 0.004 0.008 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.118 0.004
0.010 197
T40 0.008 92 131
689
115
0.010
82
131
0.020 0.118 0.00
0.020 0.118
0.020 0.118
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
SNKX
���
Page 192
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 75°
Surfacing
S P K NShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Clamping
chip breakerl ± 0.08 m ± 0.013s ± 0.025
SPKN 42 EDTR
SPKN 43 EDTR
SPKN 53 EDTR
LT 30
LT 30
LT 30
M0000046
M0000047
M0001673
201
201
202
1/2" 3/32" 75º 15º Right
1/2" 3/16" 75º 15º Right
5/8"3/16" 75º 15º Right
90°
Square inserts with 75° lead angle, designed for high depths of cut. Suitable for Roughing to Fi-nishing Face milling operations.
���
Page 193
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
SPKN
SPKN 42 EDTR
M2001285 RILT750M-D3000/5
M2001286 RILT750M-D4000/6
M2001287 RILT750M-D5000/6
M2001288 RILT750M-D6000/7
D De d a H Ap z Catalog Nr. Description
3.0003.236 1.0003/82.0000.354 5
4.0004.236 1.2501/22.0000.354 6
5.0005.236 1.5005/82.0000.354 6
6.0006.236 1.5005/82.0000.354 7
Clamp screw: RILT-1006Wrench: RILT-5004
Washer: RILT-2066
���
Page 194
Milling Machining conditions MillingMachining conditionsMilling Machining conditions SPKN 42 EDTR & SPKN 43 EDTR
Material Group Group Material Examples* Brinell d.o.c [inch] feed [inch/rev] Vc [SFM]No hardness min max min max min max
Ck15, Ck451020, 1045
150 1148
Low Carbon Steel 1 180
0.276
0.007
0.015
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.014492
787
Alloy Steel 2230
0.0200.276
0.006689
280 0.013426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.013295
492
High Alloy Steel 3
2800.020
0.276
0.005
0.004
426
320 0.011197
131
361
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.197
0.118
0.059
0.020
0.276
0.276
0.276
0.276
0.2760.006
0.005
0.015
0.014
0.013
0.013
0.011
0.008
0.009
0.011
0.015
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.276 0.006 0.015 558 820
GG 30 689
GGG 40 210
0.012
689
Nodular Cast IronGGG 50 260 0.020 0.276 0.005 394
0.0080.020 0.118 0.004 98
558
GGG 70 310 492
197
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
SPKN inserts are not recommended for Stainless Steel
SPKN inserts are not recommended for Exotic materials
4
5
6
7
8
9
10
11
12
���
Page 195
Milling Machining conditions MillingMachining conditionsMilling Machining conditions SPKN 53 EDTR
Material Group Group Material Examples* Brinell d.o.c [inch] feed [inch/rev] Vc [SFM]No hardness min max min max min max
Ck15, Ck451020, 1045
150 1148
Low Carbon Steel 1 180
0.354
0.007
0.015
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.014492
787
Alloy Steel 2230
0.0200.354
0.006689
280 0.013426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.013295
492
High Alloy Steel 3
2800.020
0.354
0.005
0.004
426
320 0.011197
131
361
350 295
262
230
197
0.020
0.354
0.354
0.020
0.020
0.354
0.236
0.118
0.059
0.020
0.354
0.354
0.354
0.354
0.3540.006
0.005
0.015
0.014
0.013
0.013
0.011
0.008
0.009
0.011
0.015
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.354 0.006 0.015 558 820
GG 30 689
GGG 40 210
0.012
689
Nodular Cast IronGGG 50 260 0.020 0.354 0.005 394
0.0080.020 0.118 0.004 98
558
GGG 70 310 492
197
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
SPKN inserts are not recommended for Stainless Steel
SPKN inserts are not recommended for Exotic materials
4
5
6
7
8
9
10
11
12
SPKN
���
Page 196
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 75°
Surfacing
S P K RShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Clamping
chip breakerl ± 0.08 m ± 0.013s ± 0.025
SPKR 42 EDTR
SPKR 43 EDTR
LT 30
LT 30
M0000048
M0000049
205
205
1/2" 3/32" 75º 15º Right
1/2" 3/16" 75º 15º Right
90°
Square inserts, with 75° lead angle designed for high depths of cut and materials that generate long chips. Suitable for Roughing to Finishing Face milling operations.
���
Page 197
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
SPKR
SPKR 42 EDTR
M2001285 RILT750M-D3000/5
M2001286 RILT750M-D4000/6
M2001287 RILT750M-D5000/6
M2001288 RILT750M-D6000/7
D De d a H Ap z Catalog Nr. Description
3.0003.236 1.0003/82.0000.354 5
4.0004.236 1.2501/22.0000.354 6
5.0005.236 1.5005/82.0000.354 6
6.0006.236 1.5005/82.0000.354 7
Clamp screw: RILT-1006Wrench: RILT-5004
Washer: RILT-2066
���
Page 198
Milling Machining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
MillingMilling Machining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
SPKR 42 EDTR & SPKR 43 EDTR
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 1,148
Low Carbon Steel 1 180
0.276
0.007
0.013
623 984
210 853
42 CrMo 4St 50-2Ck6010604140
180 0.012492
787
Alloy Steel 2230
0.0200.276
0.006689
280 0.011426
623
320 558
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.011295
492
High Alloy Steel 3
2800.020
0.276
0.005
0.004
426
320 0.010197
131
361
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.197
0.118
0.059
0.020
0.276
0.276
0.276
0.276
0.2760.006
0.005
0.013
0.012
0.011
0.011
0.010
0.008
0.009
0.011
0.013
X5 CrNi 18 9304
2100.007 0.010 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.020
0.006 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.197 0.005 0.010 492 689
Martensitic X15 Cr 13410
Annealed 0.020 0.197 0.005 0.010 492
Stainless Steel Treated 295 558
GG 20140
984
Grey Cast Iron GG 25to 230
0.020 0.276 0.006 0.013 558 820
GG 30 689
GGG 40 210
0.011
689
Nodular Cast IronGGG 50 260 0.020 0.276 0.005 394
0.0080.020 0.118 0.004 98
558
GGG 70 310 492
197
Inconel 625 115
Inconel 718 -------- 0.020 0.394 0.005 0.007 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.394 0.005
0.008 197
T40 0.007 92 131
754
115
0.009
82
131
0.020 0.197 0.00
0.020 0.394
0.020 0.020
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
���
Page 199
Milling Machining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
MillingMilling Machining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Surfacing Insert Lead angle 45°
Shoulder MillingSlotting
S P M TShape Clearance Angle Tolerance Insert TypeSquare 90° 11º Clamping
No chip breakerl ± 0.08 m ± 0.013s ± 0.025
207SPMT 4(2.5)2 LT 30 M0001226 1/2" 5/32" 1/32" Nutral
90°
Surfacing
Multi purpose 90° milling insert with 4 cutting edges. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.
SPMT
���
Page 200
Milling Machining conditions MillingMilling Machining conditions SPMT 4(2.5)2
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.354
0.004
0.015
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.354
0.003590
280 0.007328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.003
0.004
361
320 0.006197
131
328
350 295
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.157
0.079
0.039
0.020
0.354
0.354
0.354
0.354
0.3540.003
0.003
0.010
0.009
0.007
0.007
0.006
0.006
0.006
0.006
0.009
X5 CrNi 18 9304
2100.004 0.009 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.354
0.004 0.008 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.003 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.354 0.003 0.008 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.354 0.003 0.008 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.354 0.004 0.010 492 722
GG 30 623
GGG 40 210
0.009
656
Nodular Cast IronGGG 50 260 0.020 0.354 0.004 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.197 0.003
0.007 197
T40 0.006 92 131
689
115
0.008
82
131
0.020 0.354 0.00
0.020 0.354
0.020 0.354
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
�00
Page 201
Milling Machining conditions MillingMilling Machining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Machining Recommendation Guide - Please see Pg. 8
ChamferingSurfacing
S P G -Shape Clearance Angle Tolerance Insert TypeSquare 90° 11º Clamping
No chip breakerl ± 0.13 m ± 0.2s ± 0.13
210SPG ��� LT 30 M00000501/2"1/8" 1/32" Neutral
90°
Multi purpose Square insert with corner radius and a flat rake surface. Use for face milling. Rou-ghing to finishing.
�0�
SPG
Page 202
Milling CuttersMilling Cutters MillingMachining conditionsSPG 422
M2001285 RILT750M-D3000/5
M2001286 RILT750M-D4000/6
M2001287 RILT750M-D5000/6
M2001288 RILT750M-D6000/7
D De d a H Ap z Catalog Nr. Description
3.0003.236 1.0003/82.0000.354 5
4.0004.236 1.2501/22.0000.354 6
5.0005.236 1.5005/82.0000.354 6
6.0006.236 1.5005/82.0000.354 7
W=Withcoolant Clamp screw: RILT-1006Wrench: RILT-5004
Washer: RILT-2066
�0�
Page 203
Milling CuttersMilling Cutters MillingMachining conditionsSPG 422
Material Group Group Material Examples* Brinell d.o.c [inch] feed [inch/rev] Vc [SFM]No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.276
0.007
0.013
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.011426
656
Alloy Steel 2230
0.0200.276
0.006590
280 0.010328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.011295
426
High Alloy Steel 3
2800.020
0.276
0.005
0.004
361
320 0.009197
131
312
350 262
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.197
0.118
0.059
0.020
0.276
0.276
0.276
0.276
0.2760.006
0.005
0.013
0.011
0.010
0.011
0.009
0.006
0.007
0.006
0.013
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.276 0.006 0.014 492 722
GG 30 623
GGG 40 210
0.011
656
Nodular Cast IronGGG 50 260 0.020 0.276 0.005 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
SPUN inserts are not recommended for Stainless Steel
SPUN inserts are not recommended for Exotic materials
4
5
6
7
8
9
10
11
12
�0�
SPG
Page 204
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Sholder MillingSlotting
T P K NShape Clearance Angle Tolerance Insert TypeTriangle 60° 11° Clamping
no chip breakerl ± 0.05 m ± 0.013s ± 0.025
TPKN 32 PDTR
TPKN 43 PDTR
LT 30
LT 30
M0000051
M0000052
213
214
3/8" 1/8" 90º 15º Right
1/2" 3/16" 90º 15º Right
Surfacing
Multi purpose 90° milling insert with 3 cutting edges. Use for slotting, shoulder milling and face milling. Roughing to finishing.
�0�
Page 205
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
TPKN
TPKN 32 PDTR
TPKN 43 PDTR
M2001289 RILT310M-D3000/5
M2001290 RILT310M-D4000/6
M2001291 RILT310M-D5000/6
D d a H Ap z Catalog Nr. Description
3.0001.0003/82.0000.5515
4.0001.2501/22.0000.5516
5.0001.5005/82.0000.5517
M2001292 RILT320M-D4000/5
M2001293 RILT320M-D5000/6
M2001294 RILT320M-D6000/7
D d a H Ap z Catalog Nr. Description
4.0001.2501/22.0000.7875
5.0001.5005/82.0000.7876
6.0001.5005/82.0000.7877
Clamp screw: RILT-1006Wrench: RILT-5004
Washer: RILT-2064
Clamp screw: RILT-1008Wrench: RILT-5005
Washer: RILT-2088
�0�
Page 206
Milling Machining conditions MillingMachining conditionsMilling Machining conditions TPKN 32 PDTR
Material Group Group Material Examples* Brinell d.o.c [inch] feed [inch/rev] Vc [SFM]No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.472
0.006
0.010
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.276
0.005590
280 0.009328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.005
0.004
394
320 0.007295
131
361
350 328
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.197
0.118
0.059
0.020
0.472
0.472
0.276
0.276
0.2760.005
0.005
0.010
0.009
0.009
0.007
0.007
0.006
0.007
0.006
0.010
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.472 0.006 0.010 492 722
GG 30 623
GGG 40 210
0.008
656
Nodular Cast IronGGG 50 260 0.020 0.472 0.005 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
TPKN inserts are not recommended for Stainless Steel
TPKN inserts are not recommended for Exotic materials
4
5
6
7
8
9
10
11
12
�0�
Page 207
Milling Machining conditions MillingMachining conditionsMilling Machining conditions TPKN 43 PDTR
Material Group Group Material Examples* Brinell d.o.c [inch] feed [inch/rev] Vc [SFM]No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.709
0.007
0.011
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.709
0.006590
280 0.009328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.472
0.005
0.004
361
320 0.007197
131
312
350 262
262
230
197
0.020
0.472
0.472
0.020
0.020
0.472
0.197
0.118
0.059
0.020
0.709
0.709
0.709
0.551
0.5510.006
0.005
0.011
0.009
0.009
0.007
0.007
0.006
0.007
0.006
0.011
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.709 0.007 0.011 492 722
GG 30 623
GGG 40 210
0.009
656
Nodular Cast IronGGG 50 260 0.020 0.551 0.006 328
0.0070.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
TPKN inserts are not recommended for Stainless Steel
TPKN inserts are not recommended for Exotic materials
4
5
6
7
8
9
10
11
12 TPKN
�0�
Page 208
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Sholder MillingSlotting
T P K RShape Clearance Angle Tolerance Insert TypeTriangle 60° 11° Clamping
Chip breakerl ± 0.05 m ± 0.013s ± 0.025
TPKR 1603 PDTR
TPKR 2204 PDTR
LT 30
LT 30
M0000053
M0000983
217
218
3/8" 1/8" 90º 15º Right
1/2" 3/16" 90º 15º Right
Surfacing
Multi purpose 90° milling insert, with 3 cutting edges, designed for materials that generate long chips. Suitable for Roughing to Finishing - Slotting, Shoulder Face milling operations.
�0�
Page 209
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
TPKR
TPKR 32 PDTR
TPKR 43 PDTR
M2001289 RILT310M-D3000/5
M2001290 RILT310M-D4000/6
M2001291 RILT310M-D5000/6
D d a H Ap z Catalog Nr. Description
3.0001.0003/82.0000.5515
4.0001.2501/22.0000.5516
5.0001.5005/82.0000.5517
M2001292 RILT320M-D4000/5
M2001293 RILT320M-D5000/6
M2001294 RILT320M-D6000/7
D d a H Ap z Catalog Nr. Description
4.0001.2501/22.0000.7875
5.0001.5005/82.0000.7876
6.0001.5005/82.0000.7877
Clamp screw: RILT-1006Wrench: RILT-5004
Washer: RILT-2064
Clamp screw: RILT-1008Wrench: RILT-5005
Washer: RILT-2088
�0�
Page 210
Milling Machining conditions MillingMachining conditionsMilling Machining conditions TPKR 32 PDTR
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.472
0.006
0.009
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.007426
656
Alloy Steel 2230
0.0200.472
0.006590
280 0.007328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.005
0.004
394
320 0.007295
131
361
350 328
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.197
0.118
0.059
0.020
0.472
0.472
0.472
0.472
0.4720.006
0.005
0.009
0.007
0.007
0.007
0.007
0.006
0.007
0.006
0.009
X5 CrNi 18 9304
2100.005 0.008 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.472
0.005 0.007 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.197 0.005 0.009 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.197 0.005 0.009 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.276 0.006 0.009 492 722
GG 30 623
GGG 40 210
0.007
656
Nodular Cast IronGGG 50 260 0.020 0.276 0.005 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.394 0.005 0.007 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.394 0.005
0.008 197
T40 0.007 92 131
689
115
0.007
82
131
0.020 0.197 0.00
0.020 0.394
0.020 0.472
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
��0
Page 211
Milling Machining conditions MillingMachining conditionsMilling Machining conditions TPKR 43 PDTR
Material Group Group Material Examples* Brinell No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.709
0.007
0.010
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.709
0.006590
280 0.008328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.472
0.005
0.004
361
320 0.007197
131
312
350 262
262
230
197
0.020
0.472
0.472
0.020
0.020
0.472
0.197
0.118
0.059
0.020
0.709
0.709
0.709
0.709
0.7090.006
0.005
0.016
0.009
0.008
0.007
0.007
0.006
0.007
0.006
0.014
X5 CrNi 18 9304
2100.007 0.010 623 820
to 250
Austenitic X2 CrNiMo 17 2 2316
230
0.020 0.709
0.007 0.009 525 689Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.007 230 394
FerriticStainless Steel
X8 Cr 7430
Annealed 0.020 0.591 0.007 0.011 492 754
Martensitic X15 Cr 13410
Annealed 0.020 0.591 0.007 0.011 426
Stainless Steel Treated 295 492
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.709 0.007 0.010 492 722
GG 30 623
GGG 40 210
0.008
656
Nodular Cast IronGGG 50 260 0.020 0.709 0.007 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625 115
Inconel 718 -------- 0.020 0.394 0.005 0.007 92 125
Hastelloy C 213
TiAl 6 V4-------- 0.020 0.394 0.005
0.008 197
T40 0.007 92 131
689
115
0.009
82
131
0.020 0.591 0.01
0.020 0.394
0.020 0.709
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
d.o.c [Inch] feed [Inch/Rev] Speed [SFM]
4
5
6
7
8
9
10
11
12
���
TPKR
Page 212
Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Sholder MillingSlotting
T P G -Shape Clearance Angle Tolerance Insert TypeTriangle 60° 11° Clamping
No chip breakerl ± 0.05 m ± 0.013s ± 0.025
TPG 322 LT 30 M0000054 2213/8" 1/8" 90º 15º Right
Surfacing
Multi purpose 90° milling insert, with 3 cutting edges and corner radius. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.
���
Page 213
Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling MillingCutters
Insert designation Grade l s P/r D Direction Catalog Nr. Page
TPG
TPG 322
M2001289 RILT310M-D3000/5
M2001290 RILT310M-D4000/6
M2001291 RILT310M-D5000/6
D d a H Ap z Catalog Nr. Description
3.0001.0003/82.0000.5515
4.0001.2501/22.0000.5516
5.0001.5005/82.0000.5517
Clamp screw: RILT-1006Wrench: RILT-5004
Washer: RILT-2064
���
Page 214
Milling Cutters TPG 322
Material Group Group Material Examples* Brinell d.o.c [inch] feed [inch/rev] Vc [SFM]No hardness min max min max min max
Ck15, Ck451020, 1045
150 984
Low Carbon Steel 1 180
0.472
0.006
0.010
590 853
210 722
42 CrMo 4St 50-2Ck6010604140
180 0.009426
656
Alloy Steel 2230
0.0200.276
0.005590
280 0.009328
525
320 459
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220 0.007295
426
High Alloy Steel 3
2800.020
0.276
0.005
0.004
394
320 0.007295
131
361
350 328
262
230
197
0.020
0.276
0.276
0.020
0.020
0.276
0.197
0.118
0.059
0.020
0.472
0.472
0.276
0.276
0.2760.005
0.005
0.010
0.009
0.009
0.007
0.007
0.006
0.007
0.006
0.010
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
787
Grey Cast Iron GG 25to 230
0.020 0.472 0.006 0.010 492 722
GG 30 623
GGG 40 210
0.008
656
Nodular Cast IronGGG 50 260 0.020 0.472 0.005 328
0.0060.020 0.118 0.004 98
525
GGG 70 310 426
197
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480
550
450
TPUN inserts are not recommended for Stainless Steel
TPUN inserts are not recommended for Exotic materials
4
5
6
7
8
9
10
11
12
���
Page 215
Milling Cutters
ALU-Milling LT - 05 Aluminium
ALUMINIUM-MILLING INSERTSLamina's unique line of Milling inserts for Aluminum and soft material machining.Based on revolutionary geometry and our uniquecoated grade, LT-05.
ALU-Milling
���
Page 216
ALU-Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
ALU-Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Milling bodies APGT 10 - see cutters of APLX 10 (page 147) APGT 16 - see cutters of APKT 16 (page 142)
Surfacing Insert Lead angle 90°
Shoulder MillingSlotting Surfacing
A P G TShape Clearance Angle Tolerance Insert Type
80° Diamond 15° Screw Down Clampingno chip breaker
l ± 0.05 m ± 0.013s ± 0.025
225
225
APGT 1003 PDER ALU
APGT 53 PDER ALU
LT 05
LT 05
M0001007
M0000963
16 4,76 90º 15º Right
16 4,76 2,4 15º Right
���
Highly positive inserts with a unique coating and 90° lead angle for Aluminum. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.
Page 217
ALU-Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
ALU-Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
For high Si Aluminum, it is recommended to use APLX 1003 PDTR.See cutting conditions bellow.
APGT 1003 ALU
APGT 53 Alu
���
ALU-Milling
For high Si Aluminum, it is recommended to use APKT 1604 PDTR.See cutting conditions bellow.
Group Material Examples* Brinell d.o.c [Inch] feed [inch/tooth] SpeedNo hardness min max min max min max
Aluminum
----
----
----
Si < 4%4% < Si < 8%
Si > 8%
0.005 0.008 13300.012 0.354
0.004 0.007 830
Recommended to use APLX 1003 PDTR - LT-30
4000
2000
13
13
14 AlSi 12
AlMgSi 1
AlSi 6 Cu 4
Group Material Examples* Brinell d.o.c [Inch] feed [inch/tooth] SpeedNo hardness min max min max min max
AluminumAluminum
----
----
----
Si < 4%4% < Si < 8%
Si > 8%
0.006 0.013 13300.020 0.610
0.005 0.010 830
4000
2000
Recommended to use APKT 1604 PDTR - LT-30
13
13
14 AlSi 12
AlMgSi 1
AlSi 6 Cu 4
Aluminum
---- AISi 12Si > 8% 0.02 0.63 0.006 0.010 650 130014
Aluminum
---- AISi 12Si > 8% 0.02 0.35 0.003 0.008 650 130014
Page 218
ALU-Milling
Machining Recommendation Guide - Please see Pg. 8
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Application Guide
ALU-Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Surfacing Insert Lead angle 45°
ChamferingSurfacing
S E G TShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Screw down clamping
chip breakerl ± 0.08 m ± 0.013s ± 0.025
227SEGT 43 AFEN ALU LT 30 M0001008 12 4,76 45º 25º Neutral
90°
Milling bodies SEGT 1204 - see cutters of SEKT 1204 (page 190)
���
Highly positive inserts with a unique coating and 90° lead angle for Aluminum. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.
Page 219
ALU-Milling
Insert designation Grade l s P/r D Direction Catalog Nr. Page
ALU-Milling MillingMachining conditions
Insert designation Grade l s P/r D Direction Catalog Nr. Page
Screw down clampingchip breaker
SEGT 43 ALU
���
ALU-Milling
For high Si Aluminum, it is recommended to use SEKT 43 AFTN.See cutting conditions bellow.
Group Material Examples* Brinell d.o.c [Inch] feed [inch/tooth] SpeedNo hardness min max min max min max
AluminumAluminum
----
----
----
Si < 4%4% < Si < 8%
Si > 8%
0.006 0.016 13300.012 0.276
0.005 0.014 830
Recommended to use SEKT 1204 AFTN - LT-30
4000
2000
13
13
14 AlSi 12
AlMgSi 1
AlSi 6 Cu 4Aluminum
---- AISi 12Si > 8% 0.02 0.27 0.008 0.0.017 650 130014
Page 220
ONLY ONE GRADE
The Lamina Multi-Mat LT-30 Grade for Milling and Drilling can Machine most materials with
Only one grade LT-30 Steel Stainless Steel Cast Iron Super Alloys
Example Example Example Example35 NC 6 316L FC400-12 Inconel 718
True Multi-Mat inserts for real productivity
��0
Page 221
Steel Stainless Steel Cast Iron Super Alloys
Example Example Example Example35 NC 6 316L FC400-12 Inconel 718
Drilling LT - 30 Drilling
®MULTI-MAT DRILLING INSERTS
���
Drilling
l
Page 222
Drilling
Insert designation Grade l s r Direction Catalog Nr. Page
Drilling DrillingMachining conditions
Insert designation Grade l s r Direction Catalog Nr. Page
W C M XShape Clearance Angle Tolerance Insert Type
80° Diamond 7° Positive rake Speciald ± 0.05 m ± 0.08s ± 0.13
231
232
233
234
WCMX 2(1.5)2 NN
WCMX 050308 NN
WCMX 3(2.5)2 NN
WCMX 433 NN
LT 30
LT 30
LT 30
LT 30
M3001122
M3001121
M3000953
M3000954
1/4" 3/32" 1/32" Neutral
5 3,18 0,8 Neutral
3/8" 5/32" 1/32" Neutral
1/2" 3/16" 3/64" Neutral
���
Trigon inserts for Drilling. Strong cutting edges for high feeds.
Page 223
Drilling
Insert designation Grade l s r Direction Catalog Nr. Page
Drilling DrillingMachining conditions
Insert designation Grade l s r Direction Catalog Nr. Page
Special
WCMX 2(1.5)2 NN
���
Drilling
l
Material Group Group Material Examples* Brinell feed [inch/rev] SpeedNo hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron GG 25to 230
GG 30
GGG 40 210
Nodular Cast IronGGG 50 260
GGG 70 310
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480WCMX are not recommended for
Hardened Steel
WCMX are not recommended for White Cast Iron
550
450
900
0.002
0.002
0.002
600 770
670
0.005 400 770
630
0.005 400 570
500
0.005 230 570
500
0.004 230 430
330
0.003
0.004
0.002 570 770
0.003 400 700
0.003 230 400
0.003 500 700
0.003 500
400 570 700
0.004
0.005
0.005
0.004
0.004
770
0.004 0.006 500 700
570
0.006 670
0.004 400 570
500
0.002 0.004 80 120
0.0020.004 200
0.004 90 130
120
4
5
6
7
8
9
10
11
12
Page 224
Drilling Machining conditions DrillingMachining conditionsDrilling Machining conditions WCMX 050308 NN
���
Material Group Group Material Examples* Brinell feed [inch/rev] SpeedNo hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron GG 25to 230
GG 30
GGG 40 210
Nodular Cast IronGGG 50 260
GGG 70 310
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480WCMX are not recommended for
Hardened Steel
WCMX are not recommended for White Cast Iron
550
450
900
600 770
670
400 770
630
400 570
500
230 570
500
230 430
330
570 770
400 700
230 400
500 700
500
400 570 700
770
500 700
570
670
400 570
500
80 120
200
90 130
120
0.002
0.0060.002
0.002 0.006
0.006
0.005
0.002
0.003
0.003
0.003
0.003
0.004 0.007
0.0060.004
0.002 0.004
0.0020.004
0.004
0.003
0.004
0.004
0.005
0.006
0.005
0.005
4
5
6
7
8
9
10
11
12
Page 225
Drilling Machining conditions DrillingMachining conditionsDrilling Machining conditions WCMX 3(2.5)2 NN
���
Drilling
l
Material Group Group Material Examples* Brinell feed [inch/rev] SpeedNo hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron GG 25to 230
GG 30
GGG 40 210
Nodular Cast IronGGG 50 260
GGG 70 310
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480WCMX are not recommended for
Hardened Steel
WCMX are not recommended for White Cast Iron
550
450
900
600 770
670
400 770
630
400 570
500
230 570
500
230 430
330
570 770
400 700
230 400
500 700
500
400 570 700
770
500 700
570
670
400 570
500
80 120
200
90 130
120
0.002
0.0060.002
0.002 0.007
0.007
0.006
0.002
0.003
0.004
0.003
0.003
0.004 0.009
0.0070.004
0.002 0.005
0.0020.005
0.004
0.003
0.005
0.005
0.006
0.006
0.006
0.006
4
5
6
7
8
9
10
11
12
Page 226
Drilling Machining conditionsDrilling Machining conditions WCMX 433 NN
���
Material Group Group Material Examples* Brinell feed [inch/rev] SpeedNo hardness min max min max
Ck15, Ck451020, 1045
150
Low Carbon Steel 1 180
210
42 CrMo 4St 50-2Ck6010604140
180
Alloy Steel 2230
280
320
X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42
220
High Alloy Steel 3
280
320
350
X5 CrNi 18 9304
210to 250
Austenitic X2 CrNiMo 17 2 2316
230Stainless Steel to 270
X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------
FerriticStainless Steel
X8 Cr 7430
Annealed
Martensitic X15 Cr 13410
Annealed
Stainless Steel Treated
GG 20140
Grey Cast Iron GG 25to 230
GG 30
GGG 40 210
Nodular Cast IronGGG 50 260
GGG 70 310
Inconel 625
Inconel 718 --------
Hastelloy C
TiAl 6 V4--------
T40
Nickel BasedAlloys
Titanium BasedAlloys
G-X260NiCr42
400
480WCMX are not recommended for
Hardened Steel
WCMX are not recommended for White Cast Iron
550
450
900
600 770
670
400 770
630
400 570
500
230 570
500
230 430
330
570 770
400 700
230 400
500 700
500
400 570 700
770
500 700
570
670
400 570
500
80 120
200
90 130
120
0.004
0.009
0.0050.010
0.010
0.009
0.004
0.004
0.005
0.005
0.005
0.006 0.011
0.0090.005
0.005 0.007
0.0050.007
0.006
0.006
0.007
0.007
0.009
0.011
0.010
0.010
4
5
6
7
8
9
10
11
12
Page 227
Drilling Machining conditionsDrilling Machining conditions
LT - Solid Mill
Index2 flute short 30º
2 flute long 30º
2 flute long 30º ball nose
3 flute short 30º
4 flute short 30º
4 flute long 30º
4 flute long 30º ball nose
6,8 flute long 45º
6 flute extra long 45º
6,8 flute long 45º positive rake
Multi flute rougher 20º
Multi flute rougher 45º
GroupSC410CSC410F
SC415CSC415F
SC420CSC420F
SC425CSC425F
SC430CSC430F
SC435CSC435F
SC440CSC440F
SC445CSC445F
SC450CSC450F
SC455CSC455F
SC460CSC460F
SC465CSC465F
The advantages of LT - Solid Mill line:
Newly developed grade LT-40, is madefrom fine grain powder and coated withspeciallydevelopedPVDcoating,toprovide high hardness and at the sametimehightoughness.Special production processes allow forimproved wear resistance and smoothermachining. Onegradeforallmaterials.
What does our LT - Solid Mill line offer?
Excellentperformanceatdrycuttingconditions. Excellent performance on hardened steel(HRc65). Optimizedgeometryformachiningtoughmaterials. Topperformanceonalargerangeofmaterials. Extendedtool lifeatregularandextremeconditions. Superiorsurfacefinish. Fastchipejection.
•
•
•
•
•
•
•
•
••
So
lid M
ill
The Lamina, Multi-Material, Solid Carbide Milling Line LT - 40, One grade
for all materials
���
Milling
Solid-Mill
Page 228
Solid-Mill Solid-MillSolid-Mill
2 FLUTE, SHORT LENGTH, 30° HELIX
2.0 -14 -28 4,0 0 -6 6,0 40,0 3.0 -14 -28 6,0 0 -6 8,0 45,0 4.0 -20 -38 6,0 0 -8 11,0 45,0 5.0 -20 -38 6,0 0 -8 13,0 50,0 6.0 -20 -38 6,0 0 -8 13,0 50,0 8.0 -25 -47 8,0 0 -9 19,0 60,0 10.0 -25 -47 10,0 0 -9 22,0 70,0 12.0 -32 -59 12,0 0 -11 26,0 75,0 16.0 -32 -59 16,0 0 -11 32,0 100,0 20.0 -40 -73 20,0 0 -13 38,0 105,0
Catalog Nr. Product designation
M4000723 2 flute 2mm short 30º cyl. M4000724 2 flute 3mm short 30º cyl. M4000725 2 flute 4mm short 30º cyl. M4000726 2 flute 5mm short 30º cyl. M4000727 2 flute 6mm short 30º cyl. M4000728 2 flute 8mm short 30º cyl. M4000729 2 flute 10mm short 30º cyl. M4000730 2 flute 12mm short 30º cyl. M4000731 2 flute 16mm short 30º cyl. M4000732 2 flute 20mm short 30º cyl.
SC410C Cylindrical
For full machining recommendations - see pages 236 - 238
Application:
D1: Mill Diameter D2: Shank Diameter L1: Length of cut L2: Overall length
D1 Tolerance D2 Tolerance L1 L2 e8 µm h6 µm
2 FLUTE, LONG LENGTH, 30° HELIX
6.0 -20 -38 6,0 0 -8 20,0 60,0
8.0 -25 -47 8,0 0 -9 25,0 70,0
10.0 -25 -47 10,0 0 -9 30,0 90,0
12.0 -32 -59 12,0 0 -11 30,0 90,0
16.0 -32 -59 16,0 0 -11 50,0 110,0
20.0 -40 -73 20,0 0 -13 55,0 110,0
Catalog Nr. Product designation
M4000743 2flute6mmlong30ºcyl.
M4000744 2flute8mmlong30ºcyl.
M4000745 2flute10mmlong30ºcyl.
M4000746 2flute12mmlong30ºcyl.
M4000747 2flute16mmlong30ºcyl.
M4000748 2flute20mmlong30ºcyl.
SC415C Cylindrical D� Tolerance D� Tolerance L� L� e� µm h� µm
���
Page 229
Solid-Mill Solid-MillSolid-Mill
2 FLUTE, LONG LENGTH, 30º HELIX, BALL NOSE
2.0 -14 -28 6,0 0 -6 5,0 50,0 3.0 -14 -28 6,0 0 -6 8,0 60,0 4.0 -20 -38 6,0 0 -8 8,0 70,0 5.0 -20 -38 6,0 0 -8 10,0 80,0 6.0 -20 -38 6,0 0 -8 12,0 90,0 8.0 -25 -47 8,0 0 -9 14,0 100,0 10.0 -25 -47 10,0 0 -9 18,0 100,0 1 2.0 -32 -59 12,0 0 -11 22,0 110,0 16.0 -32 -59 16,0 0 -11 30,0 140,0 20.0 -40 -73 20,0 0 -13 38,0 160,0
Catalog Nr. Product designation
M4000755 2 flute 2mm long 30º B.N.cyl. M4000756 2 flute 3mm long 30º B.N.cyl. M4000757 2 flute 4mm long 30º B.N.cyl. M4000758 2 flute 5mm long 30º B.N.cyl. M4000759 2 flute 6mm long 30º B.N.cyl. M4000760 2 flute 8mm long 30º B.N.cyl. M4000761 2 flute 10mm long 30º B.N.cyl. M4000762 2 flute 12mm long 30º B.N.cyl. M4000763 2 flute 16mm long 30º B.N.cyl. M4000764 2 flute 20mm long 30º B.N.cyl.
SC420C Cylindrical ball nose
D1: Mill Diameter D2: Shank Diameter L1: Length of cut L2: Overall length
Application:
For full machining recommendations - see pages 236 - 238
D1 Tolerance D2 Tolerance L1 L2 e8 µm h6 µm
���
Page 230
Solid-Mill Solid-MillSolid-Mill
3 FLUTE, SHORT LENGTH, 30° HELIX
3.0 -14 -28 6,0 0 -6 10,0 50,0
4.0 -20 -38 6,0 0 -8 12,0 50,0
5.0 -20 -38 6,0 0 -8 14,0 57,0
6.0 -20 -38 6,0 0 -8 16,0 57,0
8.0 -25 -47 8,0 0 -9 20,0 63,0
10.0 -25 -47 10,0 0 -9 22,0 72,0
12.0 -32 -59 12,0 0 -11 25,0 83,0
16.0 -32 -59 16,0 0 -11 32,0 92,0
20.0 -40 -73 20,0 0 -13 38,0 105,0
Catalog Nr. Product designation
M4000775 3flute3mmshort30ºcyl.
M4000776 3flute4mmshort30ºcyl.
M4000777 3flute5mmshort30ºcyl.
M4000778 3flute6mmshort30ºcyl.
M4000779 3flute8mmshort30ºcyl.
M4000780 3flute10mmshort30ºcyl.
M4000781 3flute12mmshort30ºcyl.
M4000782 3flute16mmshort30ºcyl.
M4000783 3flute20mmshort30ºcyl.
SC425C Cylindrical
3.0 -14 -28 6,0 0 -6 10,0 50,0
4.0 -20 -38 6,0 0 -8 12,0 50,0
5.0 -20 -38 6,0 0 -8 14,0 57,0
6.0 -20 -38 6,0 0 -8 16,0 57,0
8.0 -25 -47 8,0 0 -9 20,0 63,0
10.0 -25 -47 10,0 0 -9 22,0 72,0
12.0 -32 -59 12,0 0 -11 25,0 83,0
16.0 -32 -59 16,0 0 -11 32,0 92,0
20.0 -40 -73 20,0 0 -13 38,0 105,0
Catalog Nr. Product designation
M4000784 3flute3mmshort30ºflat
M4000785 3flute4mmshort30ºflat
M4000786 3flute5mmshort30ºflat
M4000787 3flute6mmshort30ºflat
M4000788 3flute8mmshort30ºflat
M4000789 3flute10mmshort30ºflat
M4000790 3flute12mmshort30ºflat
M4000791 3flute16mmshort30ºflat
M4000792 3flute20mmshort30ºflat
SC425F Flat
D1:MillDiameterD2:ShankDiameterL1:LengthofcutL2:Overalllength
Application:
D� Tolerance D� Tolerance L� L� e� µm h� µm
D� Tolerance D� Tolerance L� L� e� µm h� µm
��0
Page 231
Solid-Mill Solid-MillSolid-Mill
4 FLUTE, SHORT LENGTH, 30° HELIX
2.0 -14 -28 6,0 0 -6 6,0 40,0
3.0 -14 -28 6,0 0 -6 8,0 45,0
4.0 -20 -38 6,0 0 -8 11,0 45,0
5.0 -20 -38 6,0 0 -8 13,0 50,0
6.0 -20 -38 6,0 0 -8 13,0 50,0
8.0 -25 -47 8,0 0 -9 19,0 60,0
10.0 -25 -47 10,0 0 -9 22,0 70,0
12.0 -32 -59 12,0 0 -11 26,0 75,0
16.0 -32 -59 16,0 0 -11 32,0 100,0
20.0 -40 -73 20,0 0 -13 38,0 105,0
Catalog Nr. Product designation
M4000793 4flute2mmshort30ºcyl.
M4000794 4flute3mmshort30ºcyl.
M4000795 4flute4mmshort30ºcyl.
M4000796 4flute5mmshort30ºcyl.
M4000797 4flute6mmshort30ºcyl.
M4000798 4flute8mmshort30ºcyl.
M4000799 4flute10mmshort30ºcyl.
M4000800 4flute12mmshort30ºcyl.
M4000801 4flute16mmshort30ºcyl.
M4000802 4flute20mmshort30ºcyl.
SC430C Cylindrical
Application:
D� Tolerance D� Tolerance L� L� e� µm h� µm
2,0 -14 -28 6,0 0 -6 8,0 40,0
3,0 -20 -38 6,0 0 -8 12,0 50,0
4,0 -20 -38 6,0 0 -8 15,0 50,0
5,0 -20 -38 6,0 0 -8 20,0 60,0
6.0 -20 -38 6,0 0 -8 20,0 60,0
8.0 -25 -47 8,0 0 -9 25,0 70,0
10.0 -25 -47 10,0 0 -9 30,0 90,0
12.0 -32 -59 12,0 0 -11 30,0 90,0
16.0 -32 -59 16,0 0 -11 50,0 110,0
Catalog Nr. Product designation
M4000921 4flute2mmlong30ºcyl.
M4000922 4flute3mmlong30ºcyl.
M4000923 4flute4mmlong30ºcyl.
M4000924 4flute5mmlong30ºcyl.
M4000813 4flute6mmlong30ºcyl.
M4000814 4flute8mmlong30ºcyl.
M4000815 4flute10mmlong30ºcyl.
M4000816 4flute12mmlong30ºcyl.
M4000817 4flute16mmlong30ºcyl.
SC435C Cylindrical D� Tolerance D� Tolerance L� L� e� µm h� µm
4 FLUTE, LONG LENGTH, 30° HELIX
D1:MillDiameterD2:ShankDiameterL1:LengthofcutL2:Overalllength
���
Page 232
Solid-Mill Solid-MillSolid-Mill
4 FLUTE, LONG LENGTH, 30° HELIX, BALL NOSE
2.0 -14 -28 6,0 0 -6 5,0 50,0
3.0 -14 -28 6,0 0 -6 8,0 60,0
4.0 -20 -38 6,0 0 -8 8,0 70,0
5.0 -20 -38 6,0 0 -8 10,0 80,0
6.0 -20 -38 6,0 0 -8 12,0 90,0
8.0 -25 -47 8,0 0 -9 14,0 100,0
10.0 -25 -47 10,0 0 -9 18,0 100,0
12.0 -32 -59 12,0 0 -11 22,0 110,0
16.0 -32 -59 16,0 0 -11 30,0 140,0
20.0 -40 -73 20,0 0 -13 38,0 160,0
Catalog Nr. Product designation
M4000825 4flute2mmlong30ºB.N.cyl.
M4000826 4flute3mmlong30ºB.N.cyl.
M4000827 4flute4mmlong30ºB.N.cyl.
M4000828 4flute5mmlong30ºB.N.cyl.
M4000829 4flute6mmlong30ºB.N.cyl.
M4000830 4flute8mmlong30ºB.N.cyl.
M4000831 4flute10mmlong30ºB.N.cyl.
M4000832 4flute12mmlong30ºB.N.cyl.
M4000833 4flute16mmlong30ºB.N.cyl.
M4000834 4flute20mmlong30ºB.N.cyl.
SC440C Cylindrical ball nose
D1:MillDiameterD2:ShankDiameterL1:LengthofcutL2:Overalllength
Application:
For full machining recommendations - see pages ��� - ���
D� Tolerance D� Tolerance L� L� e� µm h� µm
���
Page 233
Solid-Mill Solid-MillSolid-Mill
6.0 -20 -38 6,0 0 -8 13,0 57,0
8.0 -25 -47 8,0 0 -9 19,0 63,0
10.0 -25 -47 10,0 0 -9 22,0 72,0
12.0 -32 -59 12,0 0 -11 26,0 83,0
16.0 -32 -59 16,0 0 -11 32,0 92,0
20.0 -40 -73 20,0 0 -13 38,0 104,0
Catalog Nr. Product designation
M4000845 6flute6mmlong45ºcyl.
M4000846 6flute8mmlong45ºcyl.
M4000847 6flute10mmlong45ºcyl.
M4000848 6flute12mmlong45ºcyl.
M4000849 6flute16mmlong45ºcyl.
M4000850 8flute20mmlong45ºcyl.
SC445C Cylindrical6,8 FLUTE, LONG LENGTH, 45° HELIX
Application:
D� Tolerance D� Tolerance L� L� e� µm h� µm
6 FLUTE, EXTRA LONG LENGTH, 45° HELIX
6.0 -20 -38 6,0 0 -8 26,0 70,0
8.0 -25 -47 8,0 0 -9 36,0 90,0
10.0 -25 -47 10,0 0 -9 46,0 100,0
12.0 -32 -59 12,0 0 -11 56,0 110,0
16.0 -32 -59 16,0 0 -11 66,0 130,0
20.0 -40 -73 20,0 0 -13 76,0 140,0
Catalog Nr. Product designation
M4000857 6flute6mmX-long45ºcyl.
M4000858 6flute8mmX-long45ºcyl.
M4000859 6flute10mmX-long45ºcyl.
M4000860 6flute12mmX-long45ºcyl.
M4000861 6flute16mmX-long45ºcyl.
M4000862 6flute20mmX-long45ºcyl.
SC450C Cylindrical D� Tolerance D� Tolerance L� L� e� µm h� µm
D1:MillDiameterD2:ShankDiameterL1:LengthofcutL2:Overalllength
For full machining recommendations - see pages ��� - ���
���
Page 234
Solid-Mill Solid-MillSolid-Mill
6.0 -20 -38 6,0 0 -8 13,0 57,0
8.0 -25 -47 8,0 0 -9 19,0 63,0
10.0 -25 -47 10,0 0 -9 22,0 72,0
12.0 -32 -59 12,0 0 -11 26,0 83,0
16.0 -32 -59 16,0 0 -11 32,0 92,0
20.0 -40 -73 20,0 0 -13 38,0 104,0
Catalog Nr. Product designation
M4000869 6flute6mmlong45ºcyl.
M4000870 6flute8mmlong45ºcyl.
M4000871 6flute10mmlong45ºcyl.
M4000872 6flute12mmlong45ºcyl.
M4000873 6flute16mmlong45ºcyl.
M4000874 8flute20mmlong45ºcyl.
SC455C Cylindrical PR
6.0 -20 -38 6,0 0 -8 13,0 57,0
8.0 -25 -47 8,0 0 -9 19,0 63,0
10.0 -25 -47 10,0 0 -9 22,0 72,0
12.0 -32 -59 12,0 0 -11 26,0 83,0
16.0 -32 -59 16,0 0 -11 32,0 92,0
20.0 -40 -73 20,0 0 -13 38,0 104,0
Catalog Nr. Product designation
M4000875 6flute6mmlong45ºflat
M4000876 6flute8mmlong45ºflat
M4000877 6flute10mmlong45ºflat
M4000878 6flute12mmlong45ºflat
M4000879 6flute16mmlong45ºflat
M4000880 8flute20mmlong45ºflat
SC455F Flat
D1:MillDiameterD2:ShankDiameterL1:LengthofcutL2:Overalllength
Application:
D� Tolerance D� Tolerance L� L� e� µm h� µm
D� Tolerance D� Tolerance L� L� e� µm h� µm
6,8 FLUTE, LONG LENGTH, 45° HELIX,POSITIVE RAKE ANGLE
For full machining recommendations - see pages ��� - ���
���
Page 235
Solid-Mill Solid-MillSolid-Mill
MULTI-FLUTE, ROUGHING, LONG REACH, 45° HELIX
D� Tolerance D� Tolerance L� L� e� µm h� µm
6.0 -20 -38 6,0 0 -8 16,0 57,0
8.0 -25 -47 8,0 0 -9 16,0 63,0
10.0 -25 -47 10,0 0 -9 22,0 72,0
12.0 -32 -59 12,0 0 -11 26,0 83,0
16.0 -32 -59 16,0 0 -11 32,0 92,0
20.0 -40 -73 20,0 0 -13 38,0 104,0
Catalog Nr. Product designation
M4000893 3flute6mmrougher45ºL.R.Cyl.
M4000894 3flute8mmrougher45ºL.R.Cyl.
M4000895 4flute10mmrougher45ºL.R.Cyl.
M4000896 4flute12mmrougher45ºL.R.Cyl.
M4000897 5flute16mmrougher45ºL.R.Cyl.
M4000898 6flute20mmrougher45ºL.R.Cyl.
SC465C Cylindrical
6.0 -20 -38 6,0 0 -8 16,0 57,0
8.0 -25 -47 8,0 0 -9 16,0 63,0
10.0 -25 -47 10,0 0 -9 22,0 72,0
12.0 -32 -59 12,0 0 -11 26,0 83,0
16.0 -32 -59 16,0 0 -11 32,0 92,0
20.0 -40 -73 20,0 0 -13 38,0 104,0
Catalog Nr. Product designation
M4000899 3flute6mmrougher45ºL.R.flat
M4000900 3flute8mmrougher45ºL.R.flat
M4000901 4flute10mmrougher45ºL.R.flat
M4000902 4flute12mmrougher45ºL.R.flat
M4000903 5flute16mmrougher45ºL.R.flat
M4000904 6flute20mmrougher45ºL.R.flat
SC465F Flat
D1:MillDiameterD2:ShankDiameterL1:LengthofcutL2:Overalllength
Application:
D� Tolerance D� Tolerance L� L� e� µm h� µm
For full machining recommendations - see pages ��� - ���
���
Page 236
Solid-Mill Solid-MillSolid-Mill
Nickel Based Alloys
Titanium BasedAlloys
Material Group Group Material Examples* Brinell Vc [m/min]No hardness min max
XC12150 300
Low Carbon Steel 1S 250 Pb
180 200 270
210 250
250
160
42 CrMo 4180 160 250
Alloy Steel 2 100 Cr 6230
32 NiCrMo 14.5280
120
140 180
320 170
X38 CrMoV 5220 180
High Alloy Steel 3 X210 CrW 12280 140
X90 CrMoV 8320 140
350
140
120
100
90 120
4303 / 304 210
80 100304 L to 250
Austenitic5 316 / 316 L
230 80 100
Stainless Steel to 270
6316 Ti
-------- 70 90630 (F16PH)
Ferritic Stainless7 430 / 439 / 444 Annealed 80 100
Steel
Martensitic8 410 / 420
Annealed100 140
Stainless Steel Treated
EN - GJL 200140
250200
Grey Cast Iron 9 EN - GJL 250to 230 160 200
EN - GJL 300
Al99,5Aluminium alloysSi < 4%
13 AlCuMgPb 400 500
AlZnMgCu1,5
EN - GJS 400 210 200
Nodular Cast Iron 10 EN - GJS 600 260 160
EN - GJS 800 310 140
160
140
120
Inconel 6256040
11 Inconel 718
----------------
-------- 40Hastelloy C 60
12TiAl 6 V4
--------
--------
----------------
Aluminium alloysSi 4-8%
13 G/AlSi6Cu4 200 250G/AlSi8Cu3Fe
--------
--------
"Aluminium alloysSi > 8%"
14 G/AlSi12 160 200G/AlSi12CuFe
--------
--------
Magnesium alloys 15 MgMn 2 160 200MgAl9Zn
--------
--------
Copper alloys
16
17
CuZn39Pb2 M558 400 500
200 250
160 200
CuSn6/8
18
CuSn7ZnPb
CuAl19Ni
--------
--------
--------
--------
--------
50 100
T40 40 80
Machining recommendations
Contour - Finishing
Plunge - Slot Contouring
Contour - Slotting
Profiling thin material
Icons
Profiling - Finishing
Slotting
Plunge - Slot
Profiling - Roughing
���
Page 237
Solid-Mill Solid-MillSolid-Mill
Plunge - Slot Contouring
Machining recommendations
Slotting
contouring
2345
681012
16
20
Profiling
Tool Diameter (mm)
Feed per Tooth Widthof Cut
0.025
min max
Depthof Cut
Feed per Tooth
mm mm
Widthof Cut
min max
Depthof Cut
mm mm2.000.012 1.00
Depthof Cut
mm mmmin max
Feed per Tooth Widthof Cut
Tool Diameter (mm)
Feed per Tooth Widthof Cut
min max
Depthof Cut
Feed per Tooth
mm mm
Widthof Cut
min max
Depthof Cut
mm mm
Depthof Cut
mm mmmin max
Feed per Tooth Widthof Cut
Tool Diameter (mm)
Feed per Tooth Widthof Cut
min max
Depthof Cut
Feed per Tooth
mm mm
Widthof Cut
min max
Depthof Cut
mm mm
Depthof Cut
mm mmmin max
Feed per Tooth Widthof Cut
0.025 0.040 1.50 3.000.025 0.040 2.00 4.00
0.040 0.065 2.50 5.00
0.040 0.075 3.00 6.00
0.050 0.100 4.00 8.00
0.050 0.100 5.00 10.00
0.065 0.120 6.00 12.000.080 0.130 8.00 16.00
0.090 0.160 10.00 20.00
2345
681012
16
20
2345
681012
16
20
0.040 2.000.025 0.500.050 3.000.040 0.75
0.050 4.000.040 1.00
0.070 5.000.050 1.250.090 6.000.050 1.500.120 8.000.065 2.000.120 10.000.065 2.50
0.130 12.000.065 3.000.140 16.000.075 4.00
0.170 20.000.090 5.00
0.025 2.000.006 0.250.040 3.000.012 0.38
0.048 4.000.016 0.50
0.050 5.000.020 0.630.060 6.000.025 0.750.075 8.000.030 1.000.080 10.000.032 1.25
0.100 12.000.040 1.500.120 16.000.048 2.00
0.150 20.000.050 2.50
0.0200.0120.0300.016
0.0320.0200.0400.0200.0480.0240.0500.0320.0550.0350.0600.0400.0750.045
0.0800.048
0.040 2.000.016 2.000.048 3.000.024 3.00
0.050 4.000.032 4.00
0.070 5.000.040 5.000.085 6.000.048 6.000.100 8.000.050 8.000.110 10.000.060 10.000.120 12.000.065 12.000.130 16.000.080 16.00
0.160 20.000.090 20.00
0.045 2.000.032 0.500.050 3.000.036 0.75
0.055 4.000.040 1.00
0.065 5.000.045 1.250.070 6.000.050 1.500.080 8.000.060 2.000.100 10.000.070 2.50
0.120 12.000.080 3.000.150 16.000.100 4.00
0.200 20.000.120 5.00
0.045 2.000.032 0.250.050 3.000.036 0.38
0.055 4.000.040 0.50
0.065 5.000.045 0.630.070 6.000.050 0.750.080 8.000.060 1.000.100 10.000.070 1.250.120 12.000.080 1.500.150 16.000.100 2.00
0.200 20.000.120 2.50
2.002.003.003.00
4.004.00
5.005.006.006.008.008.00
10.0010.0012.0012.0016.0016.00
20.0020.00
Finishing Semi Finishing Roughing
Finishing Semi Finishing Roughing
Finishing Semi Finishing Roughing
As a simple starting point, we recommend to use the following cutting conditions:
���
Page 238
Solid Carbide machining recommendations
Drill selection recommendation, according to application: 1. Profiling - finishing cut :use 4 or 6 flute mill.
2. Slotting - semi-roughing cut and high feed rates: use 3 flute mill for regular chip
removal use a 2 flute mill for long chips (soft material)
use Roughing mill for maximum chip removal
3. Plunge - slot cut: use 3 flute mill for higher feed rate and 2 flute mill for soft
material.
4. Profiling - roughing cut: use Roughing mill for rapid material removal and higher
feed rates.
5. Contour- finishing cut: use 2 or 4 ball nose mill.
6. Slot-contouring cut: use 2 flute ball nose for maximum chip removal.
use 4 flute ball nose for finishing.
7. For profiling of thin material s: use 6 flute mill.
8. For Aluminum machining: Finishing cut - use 6 or 8 positive rake flute mill
slotting cut - use 2 flute short mill.
Machining Tips: 1. Climb milling is preferred with CNC machines.
2. Use ramping down operation to avoid vibrations.
3. When opening a pocket, helical interpolation operation is preferred.
Formulasrpm = sfm * 3.82 / tool diameter rpm = (m/min * 1000) / (3.14 * tool diameter) feed per min = feed per tooth * number of teeth * rpm
���
Page 239
terialReferenceList
���
Page 240
Materialgroup number AFNOR BS UNI JIS
1.0036 - - FE 37BFU -1 1.0401 CC12 080M15 C15 / C16 S15C
1.0501 C35 CC35 060A35 C35 S35C / S35CM 10351111111111111111111111111
Low Carbon Steel
Alloy Steel
1.1157
1.1158 XC 25 070M25-
C25 S25C / S28C-
1
1.1166 - SMn 433H
1.1141 XC 12 080 M15 C16
1.1170 20 M 5 (150 M8) C 28 Mn
1.1173 35 M 5 (150 M28) - SMn 433H / SCMn 2SCMn 1
1.1181 XC 32 080 A35 C 35 S 35C1.1183 XC 38TS 080 A35
-
XC 45 080 M46 / 060 A47C36 / C38 S35C / S35CM
- -
S45C / S48C / S45CM
1.1203 XC 55 060 A57 / 070 M55 C50
1.1121 XC 10 040 A10 2 C 10 S9 CK / S 10 C
40 M 5 150 M36 -
20 Mn 7 SMnC 420S15 / S15CK
1.0402 CC20 050A20 C20 / C21 S20C / S22C
1.0503 CC45 080M46230M07
C45 S45C / S45CM1.0715 S250 CF 9 SMn 28 SUM22
-S 250Pb CF 9 SMnPb 28 SUM22L/SUM23L-- - --- - -
-- - --- - --- - --- - --- - -
1.07181.07221.07251.07261.07561.0761.07621.07631.0764 - - - -1.0765 - - - -
1.1133 20 M 5 120 M19
1.1191
1
1.0050 FE 50
C45
SS50 / SS4901.0060
2
1.0070 FE 70-2FE 60-2
FE70-22
1.05352
1.0601 C60C55
S58CS55C / S55CM
22
1.1213 C53 S50C / S50CM2
1.12212
1.1525 C 80 KUC60
-2
1.15452
1.1563 C 120 KUC 100 KU2
1.15732
1.1625
SM570 / SM58
S55C / S55CM
SK3 / SUP4
-2
1.17502
1.2330 35 CrMo 4-
-
CC55-
080A62
XC 48TS 060A52
C 90 E2UXC 60
C 120 E3U
- -
C 140 KU
060 A62
C 140 E3U
-
-
-
C 105 E2U
BW 1B
070M55
1.5711 38 NC 6
1.54232
1.562216 Mo5
SL9N5903140
22
1.5713 - 3115SNC 415(H)
216 N 6-
10 NC 61.5732
2
1.5752 14 NiCr14 3415 / 331022222
SB 450M / SB 480M
14 NC 11 -
-
BW 1A-2
1.2332 - - 40 CrMo 4 -22
1.5415 1501-240
S58C / S60CM
SK2
SK5 / SK6
-
14 Ni 6
12 NC 15
708 A37 / (BP20)34 CD 4
15 D 31503-245-420
-
16 NiCr 11SNC 815(H)655 M13
-
-
--
-
-
-
-
16 Mo3 KW STBA12 / STFA12
1.5919 - - - -1.7003 38 Cr 2 38 C 2 120 M36 38 Cr 2 -1.7006 42 C 2 - 45 Cr 2 -
1020
AISI/SAE
-1015
10251536
10151035 / 1041
1330
1306 / 13301035 / 10381035
1055
1010
1045121312L3---------
1022 / 1518
1045
-
-10551060
10501060 / 1064
W 108W110
-W1W1
-
4520
-3415
4135 / P204142
ASTM A350LF5
W 112
-
ASTM A204 GrA
3115
5045 / 5046
DIN
US137-3C15
40 Mn 4C25E (CK 25)35 Mn 5
Ck 15
28 Mn 6
30 Mn 5C35E (CK 35)Cf 35
C55E (CK 55)
Ck 10
C22
C459 SMn 289 SMnPb 2810 SPb 2015 SMn 1335 S 2035 SPb 2038 SMn 2844 SMn 2844 SMnPb 2836 SMn 1436 SMnPb 14
20 Mn 5
C45E (Ck 45)
St 50-2St 60-2St 70-2C55C60
Cf 53C60E (CK 60)
C 80 W1C 105 W1C 125 WC 135 WC 80 W2C 75 W35 CrMo 4
40 NiCr 6
16 Mo 514 Ni 6
13 NiCr 614 NiCr 10
47 CrMo 415 Mo 3
15 CrNi 6
46 Cr 2
Lamina Material Groups Lamina Material Groups
��0
Page 241
Materialgroup number AFNOR BS UNI JIS
222222222222222222222
333
Alloy Steel
High Alloy Steel
1.7337
1.7361 30 CD 12 722 M24(BL3)
32 CrMo 12 --
1
1.2067 Y 100 C 6 SUJ 2
1.7335 15 CD 3.5 / 4.5 1502 620 540 14 CrMo 3
1.2080 Z200 C 12 BD3 X205 Cr 12KU
1.2210 100 C 3 - 107 CrV3 KU -SKD 1
1.2241 - - - -
1.2311 - -
-
Z38 CDV 5 BH1135 CrMo 8 KU -
Z40 CDV 5 BH13SKD 6
1.2436 Z210 CW 12 1 - X215 CrW 12 1 KU
1.7262 12 CD 4 - - SCM 415(H)
15 CD 4 5 - 18 CrMo 4 5 KW
- SCM 421 / SCM 420HSFVAF12
1.7033 32 C 4 530 A32530 M40
34 CR 4 (KB) SCr 430(H)1.7035 42 C 4 - SCr 440(H)(M)
530 A4041 C 4 41 Cr 4 SCr 440-20 MC 5 20 MnCr 5 SMnC 420H527 A6055 C 3 55 Cr 3 SUP9(A)
708 A2525 CD 4 25 CrMo 4(KB) SCM 420/SCM 430
708 A3735 CD 4 35 CrMo 4 SCCr M3/SCM 435H
708 M4042 CD 4TS 41 CrMo 4 SCM 440708 M4042 CD 4 42 CrMo 4 SCM 440(H) / SNB 7
-- - -
1.70451.71471.71761.72181.72201.72231.72251.72271.7228 50 CD 4 708 A47 - SCM 445(H)1.7242 - - 18 CrMo 4 SCM 418(H)
1.7264 18 CD 4 -
1.2343
31.2344 X40 CrMoV 511KU
X37 CrMoV51 KUSKD 61
31.2363
31.2365 30 CrMoV 12 27KU
X100 CrMoV 5 1KU-
3
1.2379
31.2419 107 WCr 5 KU
X155 CrVMo121 KUSKS 31 / SKS 2 / SKS 3
SKD 233
1.2510 95 MnWCr 5KU BO 1
31.2542
31.2550 58 WCr 9 KU
45 WCrV 8 KU-
31.2567
31.2581 X30 WCrV 9 3 KU
X30 WCrV 5 3 KU
3
1.2601
31.2606
SKD 12
SKD 11
SKD 4
-
31.2713
31.2721 -
-
BH10
105 WC 13Z160 CDV 12
-
90 MWCV 5 BO1
55 WC 2045 WCV 20
Z30 WCV 9
Z100 CDV 5 BA2
X165 CrMoW 12 KU
BS1
-
32 DCV 12 28
BS1
Z35 CWDV 5
Z32 WCV 5
BH12
BD2
1.3207 Z130 WKCDV 10 10 4 4 3
1.2885
31.3202
--SKH 57
33
1.3243 HS 6-5-2-5 SKH 55-
3
--
Z90 KCV 6 5 5 4 21.3246
31.3247
333
-
Z110 WKCDV 7 5 4 4 2 -
33
-
BH 244/555 NCDV 7
31.2762 - - - -
31.2842 BO2
-
SKD 5
SKD 62
-
HS12-1-5-5
Z110 DKCWV 9 8 4 2 1
--
90 MV 8BH 10A
X35 CrMoW 05 KU
HS 7-4-2-5SKH 59BM42
SKT 4
BH21
BT15HS10-4-3-10
HS2-9-1-8
-
BT42
334
88 MnV 8 KU -
3
1.3249 - (BM34) - -1.3343 Z 85 WDCV 6 5 4 2 BM2 HS 6-5-2-5 SKH 51
1.3346 Z85 DCWV 8 4 2 1 BM1 - -1.3344 Z130 WDCV 6 5 4 4 - - SKH 52 / SKH 53
1.3401 Z120 M 12 BW10-
- -1.3501 100 C 2 - -
2 1.7015
DIN
16 CrMo 4 432 CrMo 12102 Cr 6
13 CrMo 4 4
X210 Cr 12
115 CrV 351 CrV 4
40 CrMnMo 7
X210 CrW 12
15 CrMo 5
34 Cr 441 Cr 441 Cr 420 MnCr 555 Cr 325 CrMo 434 CrMo 441 CrMo 442 CrMo 442 CrMoS 450 CrMo 416 CrMo 4
20 CrMo 5
X38 CrMoV 5 1X40 CrMoV 5 1X100 CrMoV 5 1X32 CrMoV 3 3X155 CrVMo 12 1105 WCr 6
100 MnCrW 445 WCrV 7
60 WCrV 730 WCrV 17 2~X30 WCrV 9 3X165 CrMoV 12X37 CrMoW 5 155 NiCrMoV 650 NiCr 13
S 10-4-3-10
X32 CrMoCoV 3 3 3S 12-1-4-5
S 6-5-2-5S 7-4-2-5S 2-10-1-8
75 CrMoNiW 6 790 MnCrV 8
S 2-9-8S 6-5-2
S 2-9-1S 6-5-3
G-X120 Mn 12100 Cr 2
15 Cr 315 C 2 523 M15 - SCr 415(H)
AISI/SAE
-L1 / L3
A182 A387 Gr.12A 387 Gr 12 CI2
D3
L2-
-
-
-
51325140514051205155 / 516041304137 / 41354140 / 41424140 / 4142-4150-
-
H 11H 13
H10D2-
O1S1
S1-
-H 12L6
A2
(H10A)
-M 41M 42
--
T15
H 21
-
O2
M33 / M34M2
H41 / M1M2 Class 2
A128 75E 50100
5015 / 5115
Lamina Material Groups
���
Page 242
Materialgroup number AFNOR BS UNI JIS
33
3333333333333333333333333
High Alloy Steel
1.6546
1.6562 - 817 M40817 A37 / 818 M40
40 NiCrMo 7(KB) -SNCM 240
1
1.6565 - SNCM 439
1.6523 20 NCD 2 805 M20 20 NiCrMo 2
1.6580 30 CND 8 823 M30 30 NiCrMo 8
1.6582 35 NCD 6 817 M40 35 NiCrMo 6(KB) SNCM 447SNCM 431
1.6587 18 NCD 6 820 A16 - -1.6657 16 NCD 13 832 M13
-
35 NCD 14 -15 NiCrMo 13 -
35 NCD 16 835 M30-
1.7238 - - -
1.5864 - - - -
- 311-TYPE 7 40 NiCrMo 2(KB)
38 NiCrMo 4(KB) -SNCM 220(H)
-Z100 CD 17 - SUS 440C
349 S54Z53 CMN 21 9 Az X53 CrMnNiN 21 9 SUH 35 / SUH 36-- X20 CrMoV 12 1 -1502-502-650- X10 Ni 9 SL 9N53 / 60-Z18 N 5 - SL 5N 590640 A3535 NC 6 - SNC 236
1.41251.48711.49221.56621.56801.57101.5736 30 NC 11 - - SNC 631(H)1.5755 18 NC 13 653 M 31 - SNC 836
1.6511 40 NCD 3 817 M37
1.6746
3
1.6747 --
-
3
1.6773
3
1.7102 --
-
3
1.7108
3
1.7131 16 MnCr 560 SiCr 8
--
33
1.7362 16 CrMo 20 5 SFVAF5A / SFVAF5B
3
1.7380
3
1.7561 -12 CrMo 9 10
-
3
1.7701
3
1.7715 -51 CrMoV 4
3
1.7733
3
1.7755
-
-
-
-
3
1.80701.8159 50 CrV 4
35 NiCr 9
-
16 MC 560 SC 7
527 M17 / 590 H17
Z 10 CD 5 5 3606-625
-10 CD 9 10
-
- -
21 CrMoV 5 11
3606-622
20 CDV 6
54 SC 6
-
-
51 CDV 4
-
-
1.8523 -
1.8515
4
1.851930 CrMo 12
--
44
1.8550 - -
SUS 416
4
-30 DC 12
30 CAD 6 12
1.4005
4
1.4104
444
-
Z11 CF 13 416 S21
44
-
--
1.8507 30 CAD 6.12 - 34 CrAlMo 7 -
4
1.8509 905 M39
SFVAF22A:B / SCMV4
-
-
-
-
Z13 CF 17
735 A5151 CV 4
40 CAD 6 12722 M24
-
X12 CrS 13SUS 430F441 S29
-
1503-660-440
-36 CrMoV 12
X10 CrS 17
SUP 10
897 M39
905 M31
41 CrAIMo 7 SACM 645 / SACM 1
Austentic stainless Steel
1.4113 Z8 CD 17 01 434 S17 X8 CrMo 17 SUS 4341.4301 Z6 CN 18 9 304 S15 / LW21 / LWCF X5 CrNi 18 10 SUS 304
1.4305 Z8 CNF 18 9 303 S22 / 303 S31 X10 CrNiS 18 9 SUS 3031.4303 Z5 CN 18 11FF 305 S17 / 305 S19 X7 CrNi 18 10 SUS 305 / SUS 305J1
1.4306 Z2 CN 18 9 304 S11 / LW20 / LWCF
304 C15 / (LT196)X3 CrNi 18 11 SUS 304L / SCS19
1.4308 Z6 CN 18 10M - SCS 13301 S21 / 301 S22Z12 CN 17 8 X12 CrNi 18 07 SUS 301304 S61Z2 CN 18 7 Az X2 CrNiN 18 10 SUS 304LN302 C25 / ANC3AZ10 CN18 9M - SCS 12 / SCS 13A
1.43101.43111.4312
534 A99100 C 6 100 Cr 6 SUJ2 / SUJ4452 C11- - -
AISI/SAE
E 43404340 / 9850
86208740
-
4340 / 4337-9310
-
-
440CEV8-A3532515 251731353435-
9840 4340
--
40192625115
-A 182 F11/A 387 Gr.22
--
---
-
-
-
416430F
6145 / 6150A 355 CI.D
-
-
-
A 355 Cl.A / E71400
434304 / 304H
303305 / 308
304LCF8301304LN-
52100-
1.35051.4086
DIN
40 NiCrMo 2240 NiCrMo 8 440 NiCrMo 6
21 NiCrMo 2
30 CrNiMo 8
35 CrNiMo 617 CrNiMo 614 NiCrMo 34
49 CrMo 4
35 NiCr 18
X105 CrMo 17X53 CrMnNiN 21 9X20 CrMoV 12 1X8 Ni 9X12 Ni 536 NiCr 636 NiCr 1031 NiCr 14
36 CrNiMo 4
32 NICrMo 14 530 NiCrMo 16 636 NiCrMo 1654 SiCr 660 SiCr 716 MnCr 5
12 CrMo 19 510 CrMo 9 10
42 CrV 651 CrMoV 414 MoV 6 324 CrMoV 5 5GS-45 CrMoV 10 421 CrMoV 5 1150 CrV 4
39 CrMoV 13 9
31 CrMo 1231 CrMoV 9
34 CrAlNi 7
X12 CrS 13X14 CrMoS 17
34 CrAlMo 541 CrAIMo 7
x6 CrMoS 17 1X5 CrNi 18 9
X8 CrNiS18 9X4 CrNi 18 12
X2 CrNi 18 9G-X5 CrNi 19 10X10 CrNi 18 8X2 CrNiN 18 10G-X10 CrNi 18 8
100 Cr 6G-X120 Cr 29
Lamina Material Groups
���
Page 243
Materialgroup number AFNOR BS UNI JIS
444
555555555
66666666666666
Austentic stainless Steel
Austentic stainless Steel
Austentic and duplex stainless Steel
1.4438
1.4449 - 317 S16
431 S29
X5 CrNiMo 18 15 SUS 317SUS 317L
1.4057 Z15 CN 16 2 SUS 431
1.4436 Z6 CND 18 12 3 316 S19 / 316 S33 / LW X5 CrNiMo 17 13
1.4313 Z4 CND 13 4 425 C11 -
1.4319 - 301 S26 / 302 S26 - SUS 302SCS 5
1.434 - - - -1.4362 Z2 CN 23 04 AZ -
X16 CrNi 16
- -- -
- --
1.4511 Z4 CNb 17 - X6 CrNb 17
1.4429 Z2 CND 17 12 Az 316 S63 X2 CrNiMoN 17 13 (SUS 316LN)
Z2 CND 19 15 4 317 S12 X2 CrNiMo 18 16
X2 CrNiMo 17 13 SUS 316LSUS 316
304 Cu- X3 CrNiCu 18.9.4 XM7301 S81Z CNA 17 7 - -303 Cu- X8 CrNiCuS 18.9.2 SUS 303Cu
316 S13 / 316 S31Z6 CND 17 11 2 X5 CrNiMo 17 12 SUS 316316 S11 / 316 S13Z2 CND 17 12 2 X2 CrNiMo 17 12 SUS 316L
1.45671.45681.4570
1.44011.44041.4406 Z3 CND 17 11 Az 316 S61 / 316 S63 X2 CrNiMoN 17 12 SUS 316LN1.4408 - 316 C16 / (LT196) / A - SCS14
1.4435 Z2 CND 17 12 3 316 S11 / 316 S31
1.4410
6
1.4417 --
-
6
1.4460
6
1.4462 --
SUS 329J3L
6
1.4500
6
1.4510 X6 CrTi 17-
SUS 430LXSUS 430LX
66
1.4521 - SUS 444
6
1.4539
6
1.4541 X6 CrNiTi 18 11-
SUS 321
6
1.4542
6
1.4546 X6 CrNiNb 18 11-
6
1.455
6
1.4552
SUS 329J1
-
SUS 630 / SCS24
SUS 347
6
1.4558
6
1.4562 --
318 S13
Z4 CT 1723 NCDU 25 20M
-
- -
Z6 CNT 18 10Z2 NCDU 25 20
-
Z5 CND 27 5 Az -
X6 CrNiNb 18 11
-
Z6 CNNb 18 10
Z23CND 22 5 3 Az
321 S12 / 321 S51
Z4 CNNb 18 10M
Z7 CNU 17 4
347 C17
-
1.4583 -
1.4580
6
1.4581X6 CrNiMoNb17 12
--
66
1.4585 X6 CrNiMoSi 17 12 -SUH 4
6
Z4 CNDNb 18 12MZ6 CNDNb 17 12
-1.4747
6
1.4821
66
-
Z80 CNS 20 2 443 S65
347 S20 / 347 S31
NA15-
6
1.4563 Z 1 NCDU 31 27 - - -
6
1.4571 320 S18 / 320 S31
-
-
SCS 21
-
G-X 6 CrNiMoNb 20 11
Z20 CNS 25 04
--
Z6 CNDT 17 12318 S17
-
X80 CrNiSi 20--
-
347 SD31
318 C17 / ANC4CX6 CrNiMoNb 17 13
-
-
-
-
X6 CrNiMoTi 17 12 SUS 316Ti
6
1.4823 - - - -1.4828 Z17 CNS 20 12 309 S24 X16 CrNi 23 14 SUH 309
1.4837 - 309 C30 G-X40 CrNiSi 25 12 SCH 17 / SCH 13A1.4833 Z15 CN 24 13 309 S13 X6 CrNi 23 14 -
1.4841 Z15 CNS 25 20 314 S25310 S24
X15 CrNiSi 25 20 SUH 3101.4845 Z12 CN 25 20 X6 CrNi 25 20 SUS 310
310 C40 / 310 C45- G-X40 CrNiSi 26 20 SCH 21 / SCH 22NA17Z12 NCS 33 16 - SUH 330330 C11 / 330 C40- G-X50 NiCrSi 39 19 SCH 15 / SCH 16
-Z45 CNW 18 9 X45 CrNiW 18 9 SUH 31
AISI/SAE
317
431
316317L
-
302-S32304
-
316LN
304Cu-303Cu
316316L316LNCF-8M
316L
-S31500
--430 Ti / 439
443 / 444904L / UNS N08904
321630
347 / 348-N 08800
329
(316 Cb)
-HNV6-
N 08031N 08028
-
348
318
316Ti
-309
-309S
310 / 314310HK330--
1.48481.48641.48651.4873
DIN
X2 CrNiMo 18 15 4X3 CrNiMo 18 12 3
X17 CrNi 16.2
X3 CrNiMo 17 13 3
X3 CrNiMo 13 4
X3 CrNiN 17 8G-X40 CrNi 27 4X2 CrNiN 23 4
X3 CrNb 17
X2 CrNiMoN 17 13 3
X3 CrNiCu 18.9.4X7 CrNiAl 17 7X8 CrNiCuS 18.9.2
X2 CrNiMo 17 12 2X2 CrNiMo 17 12 2X2 CrNiMoN 17 11 2
G-X 5 CrNiMo 19 11 2
X2 CrNiMo 18 14 3
X2 CrNiMoN 25 7 4X2 CrNiMoSi 19 5X8 CrNiMoN 27 5 2X2 CrNiMoN 22 5 3G-X7 NiCrMoCuNb 25 20
X3 CrTi 17
X2 CrMoTi 18 2X1 NiCrMoCuN 25 20 3
X10 CrNiMoTi 18 10X5 CrNiCuNb 16 4X5 CrNiNb 18 10X6 CrNiNb 18 10G-X5 CrNiNb 19 11X2 NiCrAITi 32 20X1 NiCrMoCu 32 28 7
X10 CrNiMoNb 18 12
X6 CrNiMoNb 17 12 2
G-X5 CrNiMoNb 19 11 2
G-X7 CrNiMoCuNb 18 18
X80 CrNiSi 20X20 CrNiSi 25 4
X1 NiCrMoCuN 31 27 4
X6 CrNiMoTi 17 12 2
G-X40 CrNiSi 27 4X15 CrNiSi 20 12
G-X40 CrNiSi 25 12X12 CrNi 22.13
X15 CrNiSi 25 20X12 CrNi 25 21G-X40 CrNiSi 25 20X 12 NiCrSi 35 16G-X40 NiCrSi 38 18X45 CrNiW 18 9
Lamina Material Groups
���
Page 244
Lamina Material Groups
Materialgroup number AFNOR BS UNI JIS
66
7777777
8888888888888
9
6.Austentic and duplex stainless Steel 7.Ferritic stainless Steel 8.Martensitic stainless Steel Austentic and duplex stainless Steel
Martensitic stainless Steel
Ferritic stainless Steel
1.4016
1.4742 Z12 CAS 18 430 S15-
X8 Cr 17 SUH 21SUS 430
1
1.4762 Z10 CAS 24 (SUH 446)
1.4008 Z12 CN 13M 410 C21 GX12 Cr 13
1.2083 Z40 C 14 - -
1.4006 Z10 C 13 410 S21 / 410 C21 X12 Cr 13 SUS 410SUS 420J2
1.4011 - ANC1A - -1.4021 Z20 C 13 420 S37
X16 Cr 26
Z15 C 13 420 S29X20 Cr 13 SUS 420J1
Z20 C 13M 420 C24 / 420 C29SUS 410J1
1.4718 Z45 CS 9 401 S45 X45 CrSi 8
1.4001 Z8 C 13FF 403 S17 X6 Cr 13 SUS 403 / SUS 401S
Z8 C 17 430 S17 / 430 S18 X8 Cr 17
X6 CrAI 13 SUS 405-
-- - -1.49581.4977 Z42 CNKDWNb - - -
1.4000 Z6 C 13 403 S17 X6Cr 13 SUS 403 / SUS 410S
1.4002 Z8 CA 12 405 S17
1.4024
9
1.4027 --
SCS 2
9
1.4028
9
1.4031 X40 Cr 13(G) X 30 Cr 13
SUS 420J2
9
1.4034
9
1.4531 -X40 Cr 14
SUH 3SUH 1
9
10
1.4720 - -
10
1.4724
10
0.6010 G 10
X10 CrAl 12
FC 100
10
0.6015
10
0.6020 G 20G 15
10
0.6025
10
0.6030
SUS 420J2
-
FC 150
FC 250
10
0.6035
10
0.6040 -G 35
-
Z40 CSD 10Z44 C 14
-
- -
Ft 10D
Z10 C 13
Ft 20D
Z30 C 13 420 S45
G 25
-
Ft 25D
Z40 C 14
-
Ft 30D
Ft 15D
GRADE 300
(420 S45)
0.7060 FCS 600-3
0.7043
10
0.7050-
FCD 500FCD 600
1010
0.7070 GGG 70 FCD 700-
FCS 500-7FCS 370-17
FCS 700-20.80350.8040
-
MB35-7 W340/3
GRADE 260
GRADE 350Ft 35D
10
0.7033 - - - -
10
0.7040 SNG420/12
SUS 405
FC 200
FC 300
GRADE 150
GGG 50
MB40-10
GRADE 400Ft 40D
FCS 400-12SNG370/17
G 30
--W410/4
FC 350
GRADE 220
SNG500/7GGG 60
GMB40
-
SNG600/3
SNG700/2
GGG 40 FCD 400
10
Gray cast Iron
Nodular cast Iron
0.8045 - - GMB45 -0.8055 - - - -
0.8135 MN35-10 B340/12 - FCMW 3300.8065 - - - -
0.8145 - P440/7PS10/4
- FCMW 3700.8155 MP50-5 - FCMP 490
P570/3MP60-3 - FCMP 5400.8165
666
NA15(H)Z10 NC 32 21 - NCF 800(TP)321 S51Z6 CNT 18 10 (X6 CrNiTi 18 11) SUS 321-Z50 CMNNb 21 9 - -
AISI/SAE
--446
-430
420
410CA-15420
HNV3
403 / 401S / 429
--
403 / 410S / 429
405
410-
---
-405
CLASS 20CLASS 25
CLASS 35CLASS 45CLASS 50
420F
-
1000-70-03--
CLASS 55
-
80-55-06
CLASS 30
-
60-40-18
--
32510-
400105000570003
B163321-
1.48761.48781.4882
DIN
X8 Cr 17X10 CrAl 18X10 CrAl 24
G-X 7 CrNiMo 12 1
X42 Cr 13
X12 Cr 13G-X 12 Cr 12X20 Cr 13
X45 CrSi 9 3
X7 Cr 14
X5 NiCrAITi 31 20X40 CoCrNi 20 20
X6 Cr 13
X6 CrAI 13
X15 Cr 13G-X20 Cr 14X30 Cr 13X39 Cr 13X46 Cr 13X40 CrSiMo 10 2
X20 CrMo13X10 CrAl 13
EN-GJL 100 / GG 10
EN-GJL 150 / GG 15
EN-GJL 200 / GG 20EN-GJL 250 / GG 25
EN-GJL 300 / GG 30
EN-GJL 350 / GG 35
EN-GJL 400 / GG 40
EN-GJS 6007/GGG 60
EN-GJS400-15/GGG 40.3
EN-GJS 500/GGG 50
EN-GJS 700/GGG 70GTW-35GTW-40
EN-GJS 350/GGG 35.3
EN-GJS 400/GGG 40
GTW-45GTW-55
GTS-35GTW-65
GTS-45GTS-55GTS-65
X10 NiCrAlTi 32 20X12 CrNiTi 18 9X50 CrMnNiNbN 21 9
���
Page 245
Lamina Material Groups
Materialgroup number AFNOR BS UNI JIS
10
111111111111111111111111
12121212121212
121212
Nodular cast Iron
Nickel based Alloys
Titanium based Alloys
Cobalt based Alloys
2.4858
3.7025 - 2TA1-
- -
Incoloy 825
3.7115 - -
2.4856 NC 22 FeDNb NA21 -
3.7124 - 2TA21-24 -
3.7145 - - - --
3.7165 TA 6 V TA 10-13; TA28 - -3.7175 - -
-
- TA 45-51; TA 57- -
- --
---- Stellite 12 - -
2.4694 - - - Inconel 751
NC 21 FeDU NA16 -
- Hastelloy CInconel 625
2.4669 NC 15 TNb A - - Inconel X-7502.4685 - - - Hastelloy B
2.4810 - -
3.71853.7195 -
--
3.72253.7235 -
--
------
--
--
-
-
-
Stellite 7Stellite 6
-
- TP1-
-
Bronze
Aluminium with low Silicon
Aluminium with high Silicon
- -Stellite F ------
2.0966
2.10522.10902.1176
3.12553.13253.16453.2153
3.3355
3.25813.2583
3.3535
3.2315
3.2573
--
-
-- -
-
--
-CuAl9 Ni5 Fe3 M1
U PB8
-
CA 104
A-U4SG
1400 PB2
A-U4G
U-E7 Z5 Pb4
-
-
--
-- -
--
A-G3M
-
-
-A-U4Pb
A-SGM0,7 - - -
-
-
-
-
BS 1400
-
--
--
--
1400 LB2
-
-
-
-
-
- -
13
131313
141414
14
151515
22
141414
P690/2M870-2 - -
NA13NU 30 - Monel 400
NA18ND 30 AT - Monel K-500-- - Hastelloy C-4HR 5, 203-4NC 20 T - Nimonic 75-NC 30 Fe - Inconel 690
0.8170
2.43602.43752.46102.46302.4642
-NC 19 Fe Nb - Inconel 718
AISI/SAE
R 50250 / Titan Grade 2-
Inconel 625Incoloy 825
-
R 54620R 56400 / Titan Grade 5
-
VF7
Inconel 751
Inconel X-750Hastelloy B
Hastelloy C
--
Titan Grade 7
VF2-
R 52250 / Titan Grade 1
-
CDA / C63000
CDA / C 91700CDA / C 93200
---
-
-
--
-
CDA / C 94400
-
-
90001
Monel 400Monel K-500Hastelloy C-4Nimonic 75Inconel 690Inconel 7182.4668
DIN
NiCr 21 Mo
Ti 1TiAI 5 Sn 2
NiCr 22Mo 9Nb
TiCu 2
TiA I6 Sn 2 Zr 4 Mo 2 S
TiAI 6 V 4TiAI 6 V 6 Sn 2
Stellite 12
NiCr 16 Fe 7 TiAI
NiCr 15 Fe7TiAIG-NiMo 28
G-NiMo 30
TiAI 4 Mo 4 Sn 2TiAI 3 V 2.5TI-35A 0.2PDTi-50A 0.2PD
Stellite 6Stellite 7
Stellite F
CuAl10 Ni5 Fe4
CuSn12 NiCuSn7 ZNPbCuPb10 SN
AlCuSiMnAlCuMg 1AlCuMgPbG-AlSi7 Cu3
AlMg5
G-AlSi12G-AlSi12 Cu
AlMg 3
AlMgSi 1
G-AlSi9
GTS-70
NiCu 30 FeNiCu 30 AINiMo 16Cr 16TiNiCr 20 TiNiCr 29 FeNiCr 19 FeNbMo
���
Page 246
Insert reference tableLookupyourexistinginsertdesignationintheleftcolumn-thecompatibleLaminainsertisshownintheright
column.LaminaMillinggradeLT-30willreplacethegradeoftheinsertbeingused.
AReference Insert Lamina Insert Reference Insert Lamina Insert
APCR 1003 PDFR-PAPCT 1003 PDR-HMAPCT 160408FRAPET 100 305ERAPET 100 308ERAPET 160404 HSAPET 160408ERAPET 160408HS APET 160408TRAPEX 1604 PDFRAPEX 160408FR-E07APEX 160408FR-E08APFT 1604 PDRAPFT 1604 PDTRAPFT 1604PDR-M12APFT 1604PDTR-D15APFT 1604PDTR-E08APFW 1604 PDERAPFW 1604 PDTRAPHT 1604 PDERAPHT 1604 PDFRAPHT 1604 PDTRAPHW 100304 PDERAPHW 100308 PDERAPHW 1604 PDERAPHW 1604 PDSRAPHW 160408 PDERAPKR 1003 PDR-HMAPKT 100 304ERAPKT 100 305ERAPKT 1003 PDERAPKT 1003 PDFRAPKT 1003PDRBAPKT 1003 PDR-HMAPKT 1003 PDR-HM90APKT 1003 PDRJAPKT 1003 PDTR-76APKT 1003 PDTR-RMAPKT 100308 PDTR-RMAPKT 1003PDTR-8MAPKT 1604 PDERAPKT 1604 PDER-M61APKT 1604 PDRBAPKT 1604 PDR-HMAPKT 1604 PDTRAPKT 160404R
APKT 160408EAPKT 160408RAPKT 160408TR-D15APKT 1604PDTR-M14APKT 1604PDTR-ME14APKX 1604PDR-ME11APKX 1604PDR-ME12APMT 1604 PDERAPMT 160408-MAPMW 1604 PDTRAPMX 160408TR-M14APMX 160408TR-ME11APPT 160408 PDER GDAPPT 160408 PDSR GD
HM90 APCR 100304 PDFRDPHM90 APCR 100304 PDFR-PHM90 APKT 1003 PDRHM90 APKT 1003 PDTR-8MHM90 APKT 100304 PDR
ODET 0605 APENODMT 0605 APENODMW 060508 ODMW 060508TODPT 060508 ENGPWODPW 060508 ENGNOFCN 0704 TN-EMROFCN 0704 TN-MROFCR 0704 TN-EMLOFCT 05T3 AFFN-POFCT 05T3 TN-EMOFCT 05T3 TN-MOFEN 070405TN-D18OFER 070405N-E07OFER 070405N-M10OFER 070405TN-M16OFER 070405TN-ME10OFER 070405TN-ME15OFET 070405TN-M16OFET 070405TN-ME10OFET 070405TN-ME15OFEX 05T305N-E04OFEX 05T305N-M05OFEX 05T305TN-D09
O
APLX 1003 PDTRAPLX 1003 PDTRAPKT 1604 PDTRAPLX 1003 PDTRAPLX 100308 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPMT 1604 PDTRAPMT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPLX 1003 PDTRAPLX 100308 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 100308 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTR
APKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPMT 1604 PDTRAPMT 1604 PDTRAPKT 1604 PDTRAPMT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPMT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTR
APLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTR
ODMT 060508 TNODMT 060508 TNODMW 060508 TNODMW 060508 TNODMT 060508 TNODMW 060508 TNOFER 070405 TNOFER 070405 TNOFER 070405 TNOFMT 05T305 TROFMT 05T305 TROFMT 05T305 TROFER 070405 TNOFER 070405 TNOFER 070405 TNOFER 070405 TNOFER 070405 TNOFER 070405 TNOFMT 070405 TROFMT 070405 TROFMT 070405 TROFMT 05T305 TROFMT 05T305 TROFMT 05T305 TR
H
���
Page 247
SEET 1204 AFERSEEX 1203AFTN-M13SEHN 1203 AFENSEHN 1204 AFENSEHN1504 AFSNSEHT 1204 AFNSEKN 1203 AFENSEKN 1203 AFFNSEKN 1203 AFSNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFEN D66SEKN 1504 AFSNSEKR 1203 AFENSEKR 1203 AFEN-USEKR 1204 AFSN 6GPSEKT 1204 AFERSELT 1204 ENSEMN 1203 AFNSEMR 1203 AFSNSEMR 1203 AFTNSEMT 13T3 AGSN-JHSEMT 13T3 AGSN-IMSENN 1203 AFENSENN 1204 AFENSENN 1504 AFTNSEPN 1203 AFEN 6GNSEPN 1204 AFEN 6GNSEPN 1504 AFEN 6GNSPER 1203 AFEN 6GBSPER 1204 AFEN 6GBSEPT 13T3 AGEN GDSMKN 1203 E2 RSMKN 1204 E2 RSPCN 1203 SFRSPEN 1203 EDRSPER 1204 ENGB
TPCN 160308TPKN 1603 PP-R-42TPKN 2204 P2RTPMN 160308
OFEX 05T305TN-M08OFEX 05T305TN-ME07OFMR 0704 AER-76OFMR 0704 AER-MOFMR 0704 AETNOFMR 070405TR-ME13OFMT 050405TR-M14OFMT 050405TR-ME12OFMT 05T3 AFN-HROFMT 05T3 TN-MLOFMT 05T305 TN-76OFMT 070405TN-M15OFMT 070405 TN-ME13
R245-12T3 E-KLR245-12T3 E-MLR245-12T3 E-PLR245-12T3 K-MMR245-12T3 M-KHR245-12T3 M-KLR245-12T3 M-KMR245-12T3 M-PHR245-12T3 M-PLR245-12T3 M-PMr290-12T308
SDCW 1204 AEENSDCW 1204 AEFNSDCW 1204 AETNSDGT 1204 AFFNSDHT 1204 AEENSDHT 1204 AETNSDKT 1204 AEENSDMT 1204 AFPN P63SEAN 1203 AFEN 6LNSEAN 1204 AFEN 6LNSEAN 1504 AFEN 6LNSECN 1203 AFFNSEEN 1203 AFENSEEN 1504 AFENSEER 1203 AZ-WLSEER 1203 AZ-WMSEER1204 AFEN SEER 1204 AFERSEET 13T3 AGEN-JL
Insert reference tableLookupyourexistinginsertdesignationintheleftcolumn-thecompatibleLaminainsertisshownintheright
column.LaminaMillinggradeLT-30willreplacethegradeoftheinsertbeingused.
R
Reference Insert Lamina Insert Reference Insert Lamina Insert
S
OFMT 05T305 TROFMT 05T305 TROFER 070405TNOFER 070405TNOFER 070405TNOFER 070405TNOFMT 050405TROFMT 050405TROFMT 05T305 TROFMT 05T305 TROFMT 05T305 TROFMT 070405 TROFMT070405 TR
SEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSPMT 12T308
SDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKN 1203 AFTNSEKN 1203 AFTNSEKN 1504 AFTNSEKR 1203 AFTNSEKR 1203 AFTNSEKR 1204 AFTNSEKR 1204 AFTNSEKT 12T3 AFTN
SEKT 1204 AFTNSEKN 1203 AFTNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKT 1204 AFTNSEKN 1203 AFTNSEKN 1203 AFTN SEKN 1203 AFTNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKN 1504 AFTNSEKR 1203 AFTNSEKR 1203 AFTNSEKR 1204 AFTNSEKT 1204 AFTNSEKT 1204 AFTNSEKN 1203 AFTNSEKR 1203 AFTNSEKR 1203 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKR 1203 AFTNSEKR 1204 AFTNSEKT 12T3 AFTNSPKN 1203 EDTRSPKN 1204 EDTRSPKN 1203 EDTRSPKN 1203 EDTRSPKR 1204 EDTR
TPUN 160308TPK 1603 PDTRTPKN 2204 PDTRTPUN 160308
T
���
Page 248
Contacts
Subsidiaries
Lamina Tech. do Brasil Ltda.Rua Macuco, 726- cj 1603 (Moema) São Paulo - SP - BrazilCep 04523-001Tel.: +55-11-5054 6700Fax: +55-11-5054 [email protected]
Lamina Technologies FranceImmeuble le Vexin, 2me Et.Place de la Fontaine 895000 Cergy Pontoise - FranceTel.: +33 (1) 34 02 05 53Fax: +33 (1) 34 02 05 [email protected]
Lamina Tech. Deutschland GmbHAthenslebener Weg 33
39418 Staßfurt - DeutschlandTel.: +49 (3925) 329 277Fax: +49 (3925) 329 [email protected]
Notes
���