Lab #3 Report due TODAY Individual Data Processing and Individual Write Up Lab #3 Report is due TODAY by midnight Answer Multiple Choice Questions ONLINE.

Lab #3 Report due TODAY Individual Data Processing and

Individual Write Up Lab #3 Report is due TODAY by

midnight Answer Multiple Choice Questions

ONLINE TODAY Answer Student Survey ONLINE TODAY Submit Lab Report #3 in the drawer

labeled “MECE204-Strength Lab” beneath M. E. Mail Folders

Lab #3 Report Cover Page + Abstract Data Sheet Spreadsheet Plot #1: Entire Shear Stress-Strain

Curve Plot #2: Shear Modulus Plot #3: Proportional Limit Material Property Tables (two tables) +

Fracture Surface Comments and Conclusions

Bending Test Study Elastic Bending of a Beam Formulation: bending a cantilevered

beam Maximum load for elastic deformation Conduct Bending Test Determine Elastic Modulus & Poisson’s

Ratio of material Comparison to handbook value and

previous Lab #1 results

Pure BendingMaterial Assumptions Homogeneous Isotropic

Geometry/Load Assumptions

X-section has a plane of symmetry

Bending moment applied in that plane

Deformation Grids

Neutral Axis and Strain(elastic and plastic range)

Elastic Strain & Stress Distribution

Elastic Strain and Stress

I = Area Moment of Inertia

b

h

Cantilevered Beam

Bending Moment along the beam

M = Px

Measuring Strain on surface

Estimating Maximum Load

Poisson’s Effect

Bending Test Data Sheet

Conduct the Bending Test

Please initialize the Strain Meter a couple of times to ensure that it indicates zero strains at zero load, and that there is NO DRIFT with time

Key Equations

Processing Data

Elastic Modulus Plot

Poisson’s Ratio Plot

Material Properties

Lab #3 Report due TODAY Individual Data Processing and

Individual Write Up Lab #3 Report is due TODAY by

midnight Answer Multiple Choice Questions

ONLINE TODAY Answer Student Survey ONLINE TODAY Submit Lab Report #3 in the drawer

labeled “MECE204-Strength Lab” beneath M. E. Mail Folders