Achieving total customer satisfaction does require quality products and prompt delivery. However, always overlooked is the ordering process. At L.A. Fasteners, orders can be done quickly and easily over the phone. L.A. Fasteners strives to give you maximum flexibility in the ordering process. No special buttons to push and no part numbers are required. Time is money. Looking for part numbers in catalogs take time, therefore, costing you money. We are staffed with knowledgeable and professionals individuals ready to assist you with your orders or any other situation that may arise. Visit: http://www.lafasteners.com
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
SIZE BOX QTY PLATED
6-32 200 HNM01 SSHNM01
8-32 200 HNM02 SSHNM02
10-24 200 HNM04 SSHNM04
10-32 200 HNM03 SSHNM03
12-24 100 HNM05 SSHNM05
SIZE BOX QTY STAINLESSSTAINLESS
1/4 200 HNU04 SSHNU04 HNS04 SSHNS04
5/16 100 HNU05 SSHNU05 HNS05 SSHNS05
3/8 100 HNU06 SSHNU06 HNS06 SSHNS06
7/16 100 HNU07 SSHNU07 HNS07 SSHNS07
1/2 100 HNU08 SSHNU08 HNS08 SSHNS08
9/16 50 HNU09 SSHNU09 HNS09 SSHNS09
5/8 50 HNU10 SSHNU10 HNS10 SSHNS10
3/4 25 HNU12 SSHNU12 HNS12 SSHNS12
7/8 25 HNU14 SSHNU14 HNS14 SSHNS14
1” 20 HNU16 SSHNU16 HNS16 SSHNS16
SIZE BOX QUANTITY ITEM # - SAEITEM # - USS
1/4 100 HNUST04 HNSST04
5/16 100 HNUST05 HNSST05
3/8 100 HNUST06 HNSST06
7/16 100 HNUST07 HNSST07
1/2 100 HNUST08 HNSST08
9/16 50 HNUST09 HNSST09
5/8 50 HNUST10 HNSST10
3/4 25 HNUST12 HNSST12
7/8 25 HNUST14 HNSST14
1” 20 HNUST16 HNSST16
Hex Machine Screw Nuts
Finished Hex Nuts
Stover Lock Nuts (Heat Treated Alloy-G8) – Plated
STAINLESS
LOW CARB. LOW CARB.
ITEM# USS ITEM# SAE
1
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Push Retainer For 1/4 Bolt 100 J-2262Push Retainer For 5/16 Bolt 100 J-4966Push Retainer For 3/8 Bolt 100 J-2263Push Retainer For 7/16 Bolt 100 J-2264Push Retainer For 1/2 Bolt 100 J-2265
DESCRIPTION
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
32
DESCRIPTION BOX
QTYITEM#
Snap Fasteners
Button Nickel on Brass 100 A767711/64” Barrell Length
Socket Nickel on Brass 100 A7678
Stud Nickel on Brass 100 A7679
Eyelet Nickel on Brass 100 A76821/4” Barrell Length
Machine Screw Nickel on Brass 100 A768110-32x3/8
Phillips Wood Screw Nickel on Brass 100 #8 x 3/8” A9814 #8 x 5/8” A7680
Phillips Head Stainless Screw 50 #8 x 3/8” A14833#8 x 5/8” A14834 #10 x 5/8” A15687
Phillips Head Nickel On Brass#8 x 1/2 25 A16418 #8 x 3/4 A16419
Socket Nickel on Brass 100 A7683For use with A7684 & A7688
Clinch Plate Nickel on Brass 100 A7684
Wood Screw Stud Nickel on 100 A7688Brass for use with A7683
Die for use with A7677, A14830 and A7678 1 A7690
Die for use with A7679 and A7682 1 A7692
Tool for use with A7677, A14830, A7678, A7679 and 1 A7691A7682
Handpress Tool for use withA7677, A14830, A7678, A7679 1 A14835A7682. (Tool automatically punctures material.)
DESCRIPTION BOX
QTY
ITEM#
Automotive Fasteners
33
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
SIZE ITEM #BOX QTY
3/8 x 8 10 J32073/8 x 10 10 J32083/8 x 12 10 J32097/16 x 6 10 J32107/16 x 8 10 J32117/16 x 10 10 J32127/16 x 12 10 J3213
SIZE ITEM #BOX QTY
1/2 x 6 10 J32151/2 x 8 10 J32161/2 x 10 10 J32171/2 x 12 10 J32185/8 x 10 10 J32195/8 x 12 10 J3220
Spring Center Bolts - S.A.E. Fillister Head
SIZE ITEM #BOX QTY
1/16 x 1/4 100 J27201/16 x 1/2 100 J27211/16 x 3/4 100 J27225/64 x 1/4 100 J27235/64 x 1/2 100 J27245/64 x 3/4 100 J27253/32 x 1/4 100 J27263/32 x 3/4 100 J27273/32 x 1 100 J27281/8 x 3/8 100 J27291/8 x 3/4 100 J27301/8 x 1-1/2 100 J2731
SIZE ITEM #BOX QTY
5/32 x 1/2 100 J27325/32 x 1 100 J27335/32 x 1-1/2 100 J27343/16 x 1/2 50 J27353/16 x 1 50 J27363/16 x 2 50 J27377/32 x 3/4 50 J27357/32 x 1-1/2 50 J27397/32 x 2 50 J27401/4 x 1 50 J27411/4 x 2 50 J27421/4 x 3 50 J2743
Tension Pins - High Carbon Steel
Also available in assortments, refer to page 131.
DIA. X LENGTH COLOR ITEM #BOX QTY
1/8 x 5” Natural 100 NYT224
3/16 x 7-1/2” Natural 100 NYT226
3/16 x 11-1/2” Natural 100 NYT2211
5/16 x 14-1/2” Natural 100 NYT2214
1/8 x 5” Black 100 NYT224B
3/16 x 7-1/2” Black 100 NYT226B
3/16 x 11-1/2” Black 100 NYT2211B
5/16 x 14-1/2” Black 100 NYT2214B
Cable Ties
Also available in assortments, refer to page 133.
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
ITEM #SIZE
ITEM #SIZE
DESCRIPTION
White Aloe Hand Cleaner 16 oz. Squeeze Bottle HCAJ21016White Aloe Hand Cleaner Flat Top Gallon HCAJ22261
Blue Aloe Hand Cleaner with pumice 16 oz. Squeeze Bottle HCPJ32016Blue Aloe Hand Cleaner with pumice Gallon Size with pump HCPJ32141Blue Aloe Hand Cleaner with pumice Flat Top Gallon HCPJ32261
Soap Dispenser for flat top gallon HCSD03100
Hand Cleaners
DESCRIPTION
Chemicals - Spray Paints
*Material Safety Data Sheets at www.lafasteners.com
Extended Life Coolant Dye - 6 x 1oz/30ml - 6 applications
Regular Coolant Dye - 6 x 1oz/30ml - 6 applications
#55000 AIrlift™
-Refills entire cooling system incl. heater core.
-Eliminates time consuming bleeding and purging
-Check for leaks while under vacuum
-Works on cars, trucks and off road vehicles
Jr. / Pico-Lite™ Kit
-Services up to 20 vehicles
-Spotgun™ Jr. and Pico-Lite™
-2 Universal A/C Dye Cartridges
-R-134a and R12
-Includes UV glasses and service stickers
Spotgun™ Injection
-Services up to 64 vehicles
-Spotgun™
-(1) 8oz/240ml Universal A/C Dye Cartridge
-R-134a and R12 adapters
-Service stickers
Spotgun™ / Micro-lite™ Kit
-50W UV light with 70° head
-Spotgun™
-1 8oz/240ml Universal A/C Dye Cartridge
-R-134a and R12 adapters
-Includes UV glasses and Service stickers
U-View
U-View Ultraviolet Systems is recognized around the World as the leading
manufacturer of innovative products such as coolant, AC and Brake dyes, leak
detection kits, and inspection lights. Using U-View saves you time and money.
CH499005
CH499108
CH399006
CH399020
CH499008
CH488046P
CH488100P
CH488125P
CH488150P
CH488108E
CH483208
CHB483206
CHB483806
CHB483906
CH55000
CH332220
CH471500
CH414500
*Material Safety Data Sheets at www.lafasteners.com
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
38
DESCRIPTION ITEM #SIZE
Hi-Tack Gasket Adhesive 12oz CH49358• Sets fast to seal and hold the heaviest of
gaskets in place.• Resists gasoline, oil, kerosene, propane,
and butane.Applications:
Felt, cork, metal, paper, and rubber gaskets.
Super Glue 3gm Bottle CH494031oz Bottle CH49432
Boltlocker - Blue Medium Strength (threadlocking compound) 6ml Bottle CH4944124ml Bottle CH49442
250ml Bottle CH49444
Boltlocker - Red High Strength (threadlocking compound) 6ml Bottle CH4945124ml Bottle CH49452
250ml Bottle CH49454
Instantly bonds glass, metals, plastics and rubber. Works on aluminum, copper, brass, steel, vinyl, PVC,polyester, nylon, fiberglass and wood. Holdingstrength to 5000 lbs.
Chemicals - Adhesives & Sealants
Fills gaps up to .006 inches. For application beforeassembly. Can be removed without special tools.
Locks and seals metal threaded assemblies wherehigh strength is required. Fills gaps up to .008 inches.For application before assembly. Protects againstthread corrosion.
DESCRIPTION ITEM #
UV-Phazer™
-7 UV LEDs with leading edge focusing Lens
-Cordless UV LED leak detection lite.
-Concentrated UV light beam.
-4 AA batteries.
-LED has a 70,000 hour service life.
Micro-lite™
-50W UV light with 70 degree angled head
-Inspection distance: up to 3ft/0.9m.
-“Instant-On” - no waiting time required.
-Extra long power cord with battery clips.
-Includes UV glasses and rugged storage.
U-View
CH413070
CH#413000
Pipe Sealant with Teflon 6ml Tube CH4948550ml Tube CH49486
4oz Brush Top CH4949416oz Brush Top CH49495
Anaerobic sealant which chemically cures in theabsence of air. Locks and seals threaded fittings. Lubricates and resists corrosion, leakageand loosening from vibration and moisture inhydraulic, pneumatic, steam and process piping.Allows final adjustments up to 24 hours afterapplication. Seals threaded connections for air,oil, diesel fuel and hydraulic oil. Remains pliable.Temperature range -65°F to 300°F.
FastenersInc.
L.ATo Order Call: 708-447-4500 or Outside Illinois 800-837-8707
39
DESCRIPTION ITEM #SIZE
Chemicals - Adhesives & Sealants
RTV Silicone Gasket Maker Forms gaskets instantly. Resists shrinking, cracking and migration caused by thermal cycling.
Cures though and flexible. Resists oil, water, antifreeze and transmission fluid.
*Material Safety Data Sheets available upon request.
BlueFor valve covers, oil pans, transmission pans, rear end
RedFormulated to withstand highest operating temperatures.
Safe for use on oxygen sensor equipped vehicles.
Operating range to 650°F (343°C). Resists oil, water,
anti-freeze and transmission fluid.
3 oz tube CH49202
8 oz Pressure Can CH49272
11 oz Cartridge CH49292
BlackSensor safe and manufactured to meet OEM
specifications. For engines, drive train equipment and
related components. Temperature resistant up to
500°F (260°C).
3 oz tube CH49200
8 oz Pressure Can CH49271
11 oz Cartridge CH49290
Super Weatherstrip & Gasket Adhesive
High strength, fast drying, waterproof adhesive forholding gaskets in place and for bonding weatherstrip-ping. Use for seat trim, headliner trim and carpeting.Bonds rubber, vinyl, metal, fabrics and glass. Resistsoil and most shop and automotive fluids. Holds sand-ing discs. Parts can be repostioned while drying.
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
40
DESCRIPTION ITEM #SIZE
Chemicals - Adhesives & Sealants
Specially formulated tool oil for use in all piston type and rotaryair tools, as well as in-line air lubricators. Prevents rustformation in air tools while providing positive lubrication forsmoother starting, longer lasting tools. Dissolves gum andsludge that reduce tools speed and power.
• Professional grade.• Paintable.• Quiets road noise.• Adheres to any surface.
Anti-Seize & Lubricating Compound
Prevents seizing, fretting, pitting, galling and corrosion on all types of metal parts at temperaturesbetween -200°F and 2000°F (-128°C to 1093°C).Protects against corrosion between dissimilar metals.Eases assembly and disassembly. Extends part lifewhile increasing high temperature reliability. Resistswater, salt solution, and most shop and automotive fluids. Reduces coefficient of friction by a minimum of 20%. Meets MIL-907.
*Material Safety Data Sheets at www.lafasteners.com
Marvel Mystery Oil
4oz Brush Top CH495508oz Brush Top CH4955816oz Brush Top CH495606oz Aerosol CH4957016oz Aerosol CH49576
It deposits its inhibitors within the metal. Light rust and
corrosion can be wiped off within minutes after aplication.
Lubricates - WD-40 will not oxidize and cause delicate mechanisms to gum as will normal lubricants. It keeps lubricating quality at all temperatures, even in freezing weather.Penetrates - WD-40 is used to free binding and corrosion frozen parts. It is ideal for use on close tolerance fittings. There is no more effective penetrant on the market.Displaces moisture - WD-40 displaces moistureand has a “drying out” effect. It is particularly usefulfor application on electric motors. It inhibits moisturecondensation and further wetting.
11 oz. Can CHAWD40
Gal. Can CHGWD40
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
41
ITEM #
ITEM #DESCRIPTION
Grease Guns & Accessories
DESCRIPTION
Grease Fittings
*Also available in assortments refer to page 130.
Air Operated Grease Gun ZF18071• Three way loading feature:
- uses standard 14.5 oz grease cartridge- bulk grease- grease filler pump
• Angled spout and hydraulic coupler. Pressure ratio: 50 : 1Air pressure required: 30 - 120 PSISuggested working air pressure: 90 PSIDelivery per 100 strokes: 1.7 oz
Grease Gun ZF12607Lever grease gun Mod. 38. 14.5 ozwith coupler and angled spout. Packed in box.
1/4 - 28 Straight Short 25 ZF14281/4-28 1 1/8” Long 25 ZF142815161/4-28 1 5/64” Long 25 ZF142815641/4 - 28 Forty Five Degree 25 ZF14451/4 - 28 Ninety Degree 25 ZF14901/8” Pipe Straight Short 25 ZF18001/8” Pipe Straight 1 1/4” Long 25 ZF181251/8” Pipe Straight 1 3/4” Long 25 ZF181771/8” Forty Five Degree 25 ZF18451/8” Ninety Degree 25 ZF18901/4” Pipe Straight Short 25 ZF14003/16 Drive Type 1/2” Long 25 ZF10001/4 Drive Type 1/2” Long 25 ZF10015/16 Drive Type 19/32” Long 25 ZF10026MM (1.0) Straight 25 ZFMM66MM (1.0) Forty Five Degree 25 ZFMM6456MM (1.0) Ninety Degree 25 ZFMM6908MM (1.25) Straight 25 ZFMM88MM (1.25) Forty Five Degree 25 ZFMM8458MM (1.25) Ninety Degree 25 ZFMM89010MM (1.50) Straight 25 ZFMM1010MM (1.50) Forty Five Degree 25 ZFMM104510MM (1.50) Ninety Degree 25 ZFMM1090
14281564
142815161490
MM690
18125
1800
MM845 MM890
MM10
MM1090MM1045
1000
1001
1002
1400
MM6MM645
MM690
BOX QTY
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
42
717
717-6
736
736-6728 729
731 732
707 715
718
779 780 781 783
783-4 786-4 784
783-6 786-6
711
708 716
719
726 727
733
755
756787786
789
785
788
790 791 792
Milton® “Kwik-Change” Couplers –Used with all air operated equipment such as: BLOW GUNS, TIRE INFLATORS, PAINT SPRAYERS, AIR HAMMERS, AIR DRILLS, GREASING EQUIPMENT, OIL SPRAYS, RETREADING AND VULCANIZING EQUIPMENT.
3/8 ID hose x 25’ long 1/4 N.P.T. fittings on both ends THSH06253/8 ID hose x 50’ long 1/4 N.P.T. fittings on both ends THSH06501/2 ID hose x 50’ long 1/2 N.P.T. fittings on both ends MIASH08
Shop Air Hose
DESCRIPTION ITEM #
Tractor Trailer Tire Inflator AF1Inflates 4 tires at once. 90 psi maximum pressure.18’overall length, 3/8” oil resistant nylon covered hose. Lock on chucks for safety.
Tire Inflator
S638
690
693 695
699
S638-1
Air Couplers 1/4” Basic Size - 700 Series
ITEM # DESCRIPTION
755 756
Filters, Regulators & Lubricators - 1100 Series
ITEM # DESCRIPTION
Deluxe F-R Duo – Drains automatically overnight. Comes with relieving regulator
• 1106 1/4” N.P.T. Filter, Regulator Duo with 0-160 p.s.i. gage.• 1107 3/8” N.P.T. Filter, Regulator Duo with 0-160 p.s.i. gage• 1108 1/2” N.P.T. Filter, Regulator Duo with 0-160 p.s.i. gage
795 797796
DESCRIPTION ITEM #
Hose Reels (Industrial Grade by Cox)
12 Gauge x 100’ EZ Coil Extension Cord RELEZPC240012A3/8” x 50’ EZ Coil Air Hose RELEZPLP3501/2” x 50’ EZ Coil Air Hose RELEZPLP4503/8” x 75’ Heavy Duty EZ Coil Air Hose RELEZPLP3751/4” x 100’ Oxy/acetylene Welding hose EZ Coil RELEZSHW1100
Air Chucks – Precision Construction • 10 per unit pak
Designed and manufactured to exacting standards
• 690 Dual Head Chuck, 1/4” Female NPT• 693 Dual Head Straight Foot Air Chuck for Inner Duals,
with Lock-on threads both ends 1/4” NPT• 695 Male Air Chuck, 1/4” ID Hose• 699 Female Air Chuck, 1/4’ NPT• 500-6 Dual Head Chuck Washer and
Straight Head Chuck Washer (standard size)• 500-7 Single Head Chuck Washer (standard size)
In-Line Air Flow Regulator –To control air pressure to your tools...you can go from full flow to complete shutoff.Use also as a shut-off valve for air and non-corrosive liquids.
• 638 1/4” female NPT x 1/4” male NPT• 638-1 1/4” female NPT x 1/4” male NPT w/gauge• 638-7 Gauge 0-160 PSI 1/8”-27 male NPT
43
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
AD8312TFBS .250 .257-.261 F .251-.312 .677 .510 .126 1775 1100
AD8375TFBS (1/4) .313-.375 .740 .510 .126 2050
AD8437TFBS .376-.437 .802 .510 .126 2150
AD8519TFBS .438-.519 .865 .510 .126 2325
AD8620TFBS .520-.620 .937 .510 .126 2400
Aluminum Rivet with
Plated Carbon Steel
Mandrel
TYPE OFRIVET
ITEMNUMBER
DRIVETBODYDIAM
HOLE SIZE&
DRILL NO.
GRIPRANGE,INCHES
HHEADDIAM
EHEAD
HEIGHT
TYPICAL UNLIMATESTRENGTHS (lb)†Shear Tensile
LLENGTHUNDERHEAD
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
54
SIZE CARTON QTYHEAD STYLE
4-2 Dome 10m4-4 Dome 10m
4-6 Dome 10m6-2 Dome 5m6-4 Dome 5m6-6 Dome 45006-8 Dome 4m6-10 Dome 4m6-12 Dome 3m6-14 Dome 3m6-16 Dome 25008-4 Dome 2m8-6 Dome 2m8-8 Dome 2m8-10 Dome 2m8-12 Dome 15008-16 Dome 15006-4 Large Flange 3m6-6 Large Flange 2500
6-8 Large Flange 2m
6-10 Large Flange 2m
6-12 Large Flange 2m
6-16 Large Flange 1500
SIZE CARTON QTYHEAD STYLE
6-2 Dome Closed-End 5m6-4 Dome Closed-End 5m
6-6 Dome Closed-End 5m6-8 Dome Closed-End 5m8-4 Dome Closed-End 2m8-6 Dome Closed-End 2m6/40 Dome T-Rivet 45006/87 Dome T-Rivet 43006250 Dome T-Rivet 43006312 Dome T-Rivet 4m6375 Dome T-Rivet 36006437 Dome T-Rivet 35006519 Dome T-Rivet 35008140 Dome T-Rivet 26008187 Dome T-Rivet 24008250 Dome T-Rivet 2m8312 Dome T-Rivet 2m8375 Dome T-Rivet 2m8519 Dome T-Rivet 2m
8620 Dome T-Rivet 1900
Multi-Grip Blind Rivet
Part Number Identification
EXAMPLE: AD41-43BSMG - Aluminum, Dome Head, 1/8” Rivet with a Grip range of .039-.189, and a carbon
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
ITEM # SIZE
AJT907 .401
ITEM # SIZE
AJT909
ITEM # HEAD STYLESIZEITEM #
Rivet Setters
HEAD STYLESIZE
Air Hammer Gun Accessories
AJT1606 5/16 Round
AJT43012 3/8 Round
AJT1636 3/16 Universal
AJT1637 1/4 Universal
AJT1638 5/16 Universal
AJT4538 3/8 Universal
AJT4508 1/4 Todco Door
Flat Chisel
ITEM # SIZE
AJT960 .498
ITEM # SIZE
AJT910 .401
Rivet Cutter
ITEM #
AJT912
Straight Panel Cutter Claw Panel Cutter
AJT1610 3/16 Mod.
AJT1611 1/4 Mod.
AJT1620 3/16 Full
AJT1621 1/4 Full
AJT1622 5/16 Full
AJT1604 3/16 Round
AJT1605 1/4 Round
ITEM # SIZE
AJT897 .498
ITEM # SIZE
AJT895 .407
Beehive Spring For CP714 Air Hammer Quick Release Spring for CP717 Air Hammer
Tapered Punch
ITEM # SIZE
AJT961 .498
ITEM # SIZE
AJT911 .401
Air Hammer Gun Accessories
DESCRIPTION
ITEM #
POP® Power Tools
Designed for high production and trouble-free operation, these popularly priced tools are ideal for a variety of applications.
510, Series Pneumatic Rivetools
Standard of excellence for the industry, these riveters are first choice for high production assembly.The most widely used heavy-duty blind riveters in theworld, they help to increase productivity and avoiddowntime. Sets POP’s entire range of blind rivets.
540, Series Air-Hydraulic tools
The most powerful tool in the POP line, the 5400 canset even the strongest high-strength rivets—including1/4” stainless steel. And the long stroke version (1” stroke) makes it possible to set them in a singletrigger-pull.
5400 Air-Hydraulic Tools
SIZE
7 1/2” L, 11-3/16” H,4 3/4” Base DiameterWeight: 4.5 lbs.
PRG540
ITEM #SIZE
6-9/16” L, 9-5/8” H,4 1/2” Base DiameterWeight: 4lbs.
PRG510APLUS
ITEM #SIZE
11.68” L, 12.13” HWeight: 4.63 lbs.
PRT5400LS
Air Consumption .002 cf/rivet
Air Required: 85 psi max
Air Consumption .023 cf/rivet
Air Required: 85 psi max
Air Consumption .007 cf/rivet
Air Required: 85 psi max
ITEM # SIZE
AJT900 .401
ITEM # SIZE
AJT896 .498
Beehive Spring For CP714 Air Hammer Quick Release Spring for CP717 Air Hammer
ITEM #
AJT1071 Midget Oiler
ITEM # SIZEAJT3300 Retainer .401
66
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
K 20 710011 717004 - 3/16” 710066 710067 710065 N/A
K 20 710011 717005 - 1/4” 710006 710067 710065 N/A
K 2 710488 717010 - 3/16” 710501 710500 710502 N/A
Common Replacement Parts for POP and FAR Tools
67
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
DESCRIPTION
Tool Sales, Parts & ServiceAuthorized Tool Center For Huck Tools & Equipment. We alsorepair & sell USM (POP) & Cherry Tools. Short & Long Term
rentals, leases and lease buy available.
FAR RAC 180This tool is the jewel of the FAR riveting crown! An air cylinderof brass encased in plastic. A frame of steel encased inplastic. A fully enclosed mandrel ejection system. (No airlines get caught from the ejection system!) Lightweight,durable, ideal for all production line environments. Swivel air inlet and perfect tool balance reduce operator fatigue. For use with rivets up to 1/4” aluminum/steel.
FAR K2Lightweight industrial quality tool for in-plant maintenanceand serious homeowner jobs. Built with a lightweight aluminum front handle and steel rear handle. For rivets 3/32” thru 3/16 all metals.
FAR K20Heavy-duty rugged tool for rivets in alloys thru size 5/16”including monobolts, “T” rivets and other structural fasteners.Compact design generates tremendous pulling power.Extended nosepiece allows riveting in those hard to reachareas. Also available with additional nosepiece extension upto 8 inches.
For application information, parts or service please call 708-447-4500.
Ask for a demonstration.
POP PL30Shorter grip opening for one handed use. Soft Santoprene®covered grips are contoured to fit your hand and speciallydesigned to eliminate pinch points. Compact nose housingfor back pocket or tool belt storage. Built-in latch designkeeps handles closed without awkward chains or wires. Includes four nosepieces for use with 3/32” 1/8”, 5/32” and3/16” rivets tucked inside the handle.
Riveting Tools
Huck works with transportation professionals to provide the most cost effective fastening systems available…
The C6L fastener,made in aluminum,carbon steel givesyou a high consistent,non-loosening clamp.Ideal for corner cast-ings, drip mountings,fender attachments,back and side assem-bly, radiator mountingsand steps. Availablein a stainless cladhead for rust-freeservice (productionquantities only).
The MGP-30 is ametal-to-metal lowprofile fastenereffective for tamperresistant trailer doorassembly.
The Magna-Bulb isespecially suited tohigh-volume andautomatic installa-tions involving thinor low-strengthmaterials such asplastic, aluminumand fiberglass, as well as repair applications in out-of-round holes.
A blind side fastenerfor sheet metal withcircle-seal lock thatmakes it vibrationresistant. Availablein aluminum, carbonand stainless steel,the Magna-Lok fastener is designedfor roof caps, sidesheets, corner castings, roof linersand warning lightassembly.
15
8
6
1
2 2
9 & 10
1 & 2
2
5
8
1,2 & 6 9 & 10
9 & 10 9 & 10
C6L Fastener
1 2 3 4 5
68
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
The Magna-Grip fastener provides astrong rattle resist-ant, wide grip range.Spec them for lowerrub rails, steps, roofcaps, side sheetsand cab assembly.
Huck’s structuralblind oversized fastener for internalframe supports,mounting bracketsand doors.
A two piece fastenerdesigned for fiber-glass, plastic andmetal-clad plywoodto metal fastening.Provides a weather-proof, tamper proofuniform clamp.
An advanced water-tight, polymer sealantmakes Magna-Titeperfect for oversizeholes and repairapplications. Its built-in wide grip rangeand large blind sidefootprint substantiallyreduce fastener pull-out for installation inthin or low-strengthmaterials such as aluminum, fiberglassand plastic.
The two piece Grade8 fastener designedfor permanent installation. Handlestough jobs likecrossmembers,frame assembly,spring hangers and fifth wheels.
3/8 246 99-3318 Pneudraulic Production2580 99-3318 Hydraulic Production
Installation Tooling
Unique solid-circle lock ensures maximum strength and resistanceto vibration. It is designed to eliminate pin pushout. It forms amechanical lock, permanently locking the pin and sleeve together.
72
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Magna-Bulb® LockRiteTM
High strength with a broader bearingsurface. The Magna-Bulb® fastenercreates a broader bearing surfacethat helps spread the load over more area for a stronger, longer lasting connection.
Vibration-resistant C6L® fastenersinstall with consistency and control.They resist loosening due to vibrationand provide a high uniform clampforce. This is an excellent fastener fora wide range of structural applications.
Note: When using 3LC collars, add “J” dimension to thickness of material being fastened to determine grip number.Note: When using 8LC collars, subtract “J” dimension from thickness of material being fastened to determine grip number.Note: Use collars and pins together as shown in “Values” tables, or contact L.A. Fasteners.
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Note: “Grip” is actual thickness of material to be fastened—contact HUCK for grips not shown.Note: C6L90 is not available in grip 2 for 3/16 and 1/4 diameters and grip 4 for 3/8 diameter.
75
1 Minimum installed values (pounds) in nominal grip
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
A properly installed HUCKBOLTFastener will possess the dimensionalcharacteristics shown in the chart.Should the dimensions “A” or “B”exceed the indicated values, the fas-tener is being used out-of-grip. A “C”dimension less than the values specifiedis an indication of incomplete swage.A “D” dimension exceeding the specifiedvalues is an indication of an incorrector worn anvil on the installation tool.Because of design margin built intothe fastener and peculiar field installationconditions, failure of an installed fastener
to meet the specified dimensional criteria is not necessarily an indicationof an improperly installed assembly.Conversely, a HUCKBOLT pin installedin a properly prepared hole with therecommended single cycle drivingtool, which swages the lock collarmaterial into the locking grooves ofthe pin and breaks off the pintail at thebreakneck groove, will always possessat least the minimum guaranteedstrength characteristics when thedimensional limits specified are met.
5/16 256 99-99-245 Pneudraulic Production2580 99-99-245 Hydraulic Production
3/8 256 99-100-245 Pneudrauic Production2580 99-100-245 Hydraulic Production
Installation Tooling
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
77
C6L® LockBoltTM
C6L LOCKBOLT PINS
C6L B - R 8 - 4 G
Part Number Identification
Finish: G = zinc
Grip Range: (See Grip Data Chart)
Diameter: in 1/32" increments
Material: R = carbon steel, C = 2024 alum. alloy, F = 6061 alum. alloy, U = CRES steel
Style: T = truss head, B = brazier head, 90 = flush head
C6L LOCKBOLT COLLARS
2 LC - R 8 G
Finish: G = zinc
Diameter: in 1/32" increments
R = carbon steel, F = 6061 alum. alloy heat treated, I = 6061 alum. alloy, CU = CRES steel
Lock Collar
Type: 2 = standard, 3 = flange
Note: C120L (Grade 5) available at special request.Contact your L.A. Fasteners representative for stainless steel capped and special finishes not published.
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Magna-Grip® LockBoltTM
78
DIAM. (NO.)
GRIP NUMBER
GRIP RANGE A B C D +0.25-.000 A REF D REF
HOLE SIZEMAX
Dimensional Data-Button Head
Grade 2 fastener that resists loosening.Widely known as the most reliablewide grip fastening system there is—the HUCK Magna-Grip® fastener alsoprovides vibration resistance and highuniform installed values.
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Magna-Grip® LockBoltTM
MAGNA-GRIP PINS
MGP B - R8 - 10 G
Part Number Identification
Finish: G = zinc, blank = no plate
Grip Range: (See Grip Data Chart)
Diameter: in 1/32" increments
Material: R = carbon steel, E = 7075-T6 aluminum
Head Style: B = button, T = truss, 30 = broad truss, 90 = 90° flush, 98T = rivet
MAGNA-GRIP
MAGNA-GRIP COLLARS
MG C - R 8 U L
Options: L = tab-lok
Finish: U = zinc chromate gold, G = zinc chromate colorless
Diameter: in 1/32" increments
Material: R = carbon steel, F = 6061 aluminum
Base Style: C = standard flange, CS = medium flange, CW = wide flange
MAGNA-GRIP
83
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
C50L® PowerBoltTM
DIAM. (NO.) A B B C B C B CC
Fastener Dimensions
The rugged C50L® PowerBolt™ fasteneris an alternative to Grade 5 bolts.Available in diameters ranging from1/2” to 1-3/8”, a variety of materialsand head styles, the C50L® is ideal forapplications where consistent, uniformclamp force is required.
Carbon Steel Pins-LC-2R or 3LC-2R Collars 2024 ALuminum Pins-LC-F or 3LC-F Collars 6061 ALuminum Pins-LC-1 or 3LC-1 Collars CRES Pins-LC-2CU or 3LC-2CU Collars
1 Minimum values, in pounds, of installed fasteners. Round head, in carbon steel equivalent to ASTM A325 high strength bolts. Meets requirements of MIL-P-23469.
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
84
Head Style
Round R
Truss T
90° Flush 90
60° Flush 60
Material
Carbon Steel BR
2024 Aluminum C
6061 Aluminum F
CRES 1 U
Diameter
1/2 16
5/8 20
3/4 24
7/8 28
1 32
1 1/8 36
Grip
Refer to Grip Data Chart
C50L® PowerBoltTM
C50L PINS
Part Number Identification
Follow the form below to construct a part number for ordering C50L pins. Refer to the Grip Data chart for grip numbers.
Example: LC-2R16G is a Standard Collar, Low Carbon Steel, 1/2" Diameter, Zinc Finish
Collar Style
Standard LC
Flanged 3LC
Low Profile 8LC
Material
Low Carbon Steel
Zinc Plated 2R
6061 Aluminum
Aged F
6061 Aluminum I
Stainless Steel 2CU
Diameter
1/2 16
5/8 20
3/4 24
7/8 28
1 32
1 1/8 36
Finishes
Zinc G
Options
Tab-Lok L
To Order Call: 708-447-4500 or Outside Illinois 800-837-870785
DESCRIPTION
Breakstem Fastening
N RivetTM
Non structural blind breakstem rivet designed for a wide rangeof applications. Available in a variety of material and combina-tions with low profile, large flange or countersunk head styles.
Closed End RivetBlind breakstem sealed body rivet designed to prevent passageof vapor or liquid through the placed fastener. Mandrel will notdislodge into the workpiece.
Avex®
The original multi-grip blind breakstem rivet. Positive stem retention, complete hole fill and wide grip range are some of the unique benefits offered.
Stavex®
Multiple grip all-steel breakstem rivet. Unique crimp design pro-vides wide grip range and smooth bubble formation on tailside.Available in low profile, large flange, and countersunk head styles.
Bulbex®
All aluminum corrosion resistant fastener designed for assem-blies using soft, brittle, or thin materials. Three petal formationcompensates for oversized or irregular holes.
Avinox® IIAll-stainless steel bulbing breakstem rivet. Ideal for use in corro-sive or adverse environmental conditions. Good clamp-up providestight and secure joint without crushing parent material.
Avibulb®
All-steel bulbing breakstem rivet. Excellent clamp-up and superi-or shear and tensile strength result in a vibration resistant joint.Smooth bubble formation is ideal for thin backside material.
Cherrymate®
A two piece non-structural fastening system for extra-long grip applications
T-LokTM
A cost effective and efficient method of attaching metal to wood, FRP or other soft material without through holes.
DESCRIPTION
Structural Fastening
QTM RivetInternal friction lock with positive retention. Good shear strength.Provides moderate hole fill and a weather-resistant feature.Available in a variety of materials and headstyles.
TTM RivetSuperior clamp-up where there is a sheet separation. Vibrationresistant. Good shear and tensile. External locking featurerequires special nosetip.
86
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Klamptite® Rivet (Structural)External locking feature requires special nosetip. Provides good vibration resistance. Exceptional clamp-up strength. Wide grip range.Three-petal formation compensates for oversized or irregular holes.
Monobolt® RivetPositive external locking feature. Requires special nosetip.Good vibration and water resistance. Superior hole fill andclamp-up. Available in a variety of material and headstyles.
Interlok® RivetPositive internal mechanical locking feature with superior vibration and water resistance. Available in a variety of materialsand headstyles.
Hemlok® RivetHigh shear strength, large blind-side footprint for use in thin sheet or brittle material applications. Available in steel and aluminum.
Maxlok® LockboltA versatile lockbolt with an extensive grip range. Available in avariety of headstyles. Available in steel and aluminum.
Avdelok® LockboltA high-strength, vibration-resistant lockbolt. Available in a varietyof headstyles and materials.
Avtainer II® /AvtainerWide bearing headstyle for Fiberglass Reinforced Plywood(FRP) and composites. Available with encapsulated head in various colors.
87
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Material Choices: The standard Bulb-tite rivets are made of aluminum alloy, providing a durable non-rusting fastener that canwithstand weather-related corrosion. Some Bulb-tite sizes are also available in steel and monel materials where higher strength is required.
DESCRIPTION
Structural Fastening
How The Bulb-Tite Works:During installation, the rivet body folds into three separate legs, forming the blind-side upset head. The Bulb-titemandrel breaks off *flush with the rivet head. *Flush mandrel break requires use of special Bulb-tite installation tool nose tip.
Weather Tite: A special nose tip on the rivet installation tool crimps a crown feature on the rivet head. This crown/crimp effectivelyseals the rivet bore off from intrusion of dirt and moisture. Adding the optional washer to the Bulb-tite, createsan additional seal around the perimeter of the rivet head to stop moisture from intruding beneath the rivet head.
High Strength: Another benefit of the Bulb-tite rivet’s retained mandrel core is the added strength it provides. Bulb-tite rivetsare less prone to failure in high shear loads.
High Clamping: The large three-legged upset head evenly distributes the Bulb-tite rivet’s high clamp load over a broader bearing surface than do conventional blind rivets. This enables soft, thin, ductile and even brittle materials to be securelyclamped without deformation, cracking or other damage to the application.
Hard-To-Fasten Applications:Bulb-tite rivets function well in materials where other fasteners fail. The folded legs individually conform tocurved surfaces enabling fastening onto pipes, corrugations and other challenging shaped applications.Oversized or elongated holes can be adequately covered by the large leg formations to resist pull through under stress in high tension-load applications.
Multi-Grip Capability: Each Bulb-tite handles a wide variation in material thickness. Most sizes fasten over a 1/4" thickness range.Fewer rivet sizes may be required resulting in reduced inventory requirements and simplified fastener selection.
Choice of Finished Appearance:Bulb-tite rivets are offered in a variety of head styles including: Standard Dome, Low Profile, Large Flange andCountersunk. Color matched plastic finish caps can be snapped onto certain Bulb-tite head styles to concealinstalled rivet heads. The unique Shaveable Head Bulb-tite was specifically designed for use in heavy truck andtrailer applications where solid rivets are used. They are ideal for repair of solid riveted assemblies where access tothe application’s blind side may be no longer accessible. The Shaveable Bulb-tite rivet head is finished using a specialhead-shaving tool. Shaved Bulb-tite rivet heads then match the appearance of solid rivets in the assembly.
To Order Call: 708-447-4500 or Outside Illinois 800-837-870788
Dome Head (Recessed Crown) RV6606, RV6676 & RV6696
Shaveable Brazier Head RV6607
A - Body Diameter • B - Head Height • D - Head Diameter • L - Rivet Body Length • F - Blind Side Protrusion
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Olympic Bulb-Tite Rivets
Plastic Finish Caps
Optional plastic finish caps are available for use with 3/16” and 1/4”diameter RV6604 series Bulb-tite. These caps snap onto installed rivetheads to provide a more finished appearance. Finish caps can be orderedto color match applications such as painted roofs or building facia.
3. SHAVED BULB-TITE RIVETS MATCH SOLID RIVETS PERFECTLY!
Shaveable Series
1. PROTRUDING MANDREL IS SNIPPED FLUSH WITH RIVET’S HEAD.
2. PROPER SIZED SHAVER TOOL, INSTALLEDIN A STANDARD 1/4” DRILL, SHAVESRIVET HEAD.
The Shaveable series of Bulb-tite rivets are designed for use in applications where solid “bucked” type rivets are commonlyused such as truck/trailer body assembly or repair. The Shaveable Bulb-tite simplifies repairs made to solid rivetedassemblies, as rivet replacement does not require access to the blind side of the application. The Bulb-tite’s large blindsidefootprint functions well in rivet holes that have becomeelongated or too large to allow use of a solid rivet. Simplyinstall the Bulb-tite and finish the rivet head with an Olympichead-shaving tool. The shaved head profile perfectly matchesthe solid brazier head rivets used elsewhere in the assembly.Shaveable Bulb-tites are available in 5/32”, 3/16” and 1/4”diameters and can be installed with most standard blind rivettools. A special tool nose tip is not required. The installedrivets mandrel is designed to break high, leaving an exposedmandrel plug extending above the set fastener’s head.
90
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
91
DESCRIPTION
Olympic Mega-Grip Rivets
High Strength:Mega-Grip rivets provide higher shear and tensile strengths when compared to standard blind rivets.Fewer fasteners can be used per assembly, adding to overall savings.
Wide Grip Range: A single Mega-Grip can replace up to five standard blind rivets due to its expanded grip range capabilitythat adjusts to variations in application thickness.
Locked Mandrel Core: Mega-Grip’s robust mandrel locking feature keeps the rivet’s mandrel core securely locked within the installedrivet for added strength.
High Clamp-Up: The greater clamping force generated by the Mega-Grip helps to securely close gaps between application materials for tighter assemblies.
Hole Filling: During installation the Mega-Grip’s rivet body expands radially within the application materials, resultingin improved sealing and higher joint integrity.
Weather Tight:The Mega-Grip resists leakage due to the hole filling action and retained mandrel core that helps toseal out unwanted moisture from entering the assembly.
Flush Break Mandrel: Mandrels consistently break off flush with the installed rivet heads, providing a smooth finished appearance.
Standard Tools: Some structural rivet designs require installation tools to be equipped with special nose tips in order to lock therivet’s mandrel core in place. These tips frequently wear, resulting in installed rivets that can lose their mandrelcores. The Mega-Grip is installed using standard installation tools, eliminating the need for frequent and costlyreplacement of tool nose tips.
Material Choices: Mega-Grip rivets are available in Aluminum, Steel and Stainless Steel versions. (Stainless Steel Mega-Gripis special order only.)
Mega-Grip rivets are used in high vibration applications such as the assembly of chassis for industrial air conditioning systems, heavy truck bodies and automotive assemblies.
92
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
QTYITEM #
Heavy Duty Drills
DESCRIPTION/SIZE QTY
3/16 x 6" Long DBT630 67/32 x 6" Long DBT632 615/64 x 6" Long DBT633 61/4 x 6" Long DBT640 69/32 x 6" Long DBT642 65/16 x 6" Long DBT650 63/8 x 6" Long DBT660 67/16 x 6" Long DBT670 61/2 x 6" Long DBT680 6
We guarantee this to be the one drill that will drill more holes and take more abuse than any other.No walk drilling. Rugged construction allows you to drill more holes. For faster drilling of toughmaterial such as stainless and hi-alloy steels, the special point and surface treatment increase wearresistance of the drill.
• Assortments Available
STANDARD LENGTH
HEAVY DUTY ITEM EXTRA HEAVY DUTY ITEM COBALT ITEM
DESCRIPTION/SIZE ITEM # DESCRIPTION/SIZE
3/16 x 12" Long DBH1230 67/32 x 12" Long DBH1232 61/4 x 12" Long DBH1240 69/32 x 12" Long DBH1242 65/16 x 12" Long DBH1250 33/8 x 12" Long DBH1260 37/16 x 12" Long DBH1270 31/2 x 12" Long DBH1280 3
1/2 6 DB80 DBHD80 DBC809/16 x 1/2 shank 1 DBT905/8 x 1/2 shank 1 DBT1003/4 x 1/2 shank 1 DBT1207/8 x 1/2 shank 1 DBT1401 x 1/2 shank 1 DBT160
QTY
High Speed Taps
High Speed Steel perfect for Use for general machine, CNC, and hand tappingof most materials. Also available in sets.
Drill Bits
SIZE QTY
The 135 degree split-point on this bit produces less walking and ensures an accurate start everytime. Blacksurface-treated finish makes it the perfect choice for a variety of medium hardness metal drilling
3.0 X .5 3 DBMTBTC03 DBMTPTC03 DBMTTTC033.5 X .6 3 DBMTBTC035 DBMTPTC035 DBMTTTC0354.0 X .7 3 DBMTBTC04 DBMTPTC04 DBMTTTC04
4.5 X 7.5 3 DBMTBTC045 DBMTPTC045 DBMTTTC0455.0 X .8 3 DBMTBTC05 DBMTPTC05 DBMTTTC05
6.0 X 1.0 3 DBMTBTC06 DBMTPTC06 DBMTTTC067.0 X 1.0 3 DBMTBTC07 DBMTPTC07 DBMTTTC07
8.0 X 1.25 3 DBMTBTC08 DBMTPTC08 DBMTTTC0810 X 1.50 3 DBMTBTC10 DBMTPTC10 DBMTTTC1012 X 1.75 3 DBMTBTC12 DBMTPTC12 DBMTTTC12
Designed for rough cutting through tar paper. shingles and related roofing materials with embeddednails without binding or sticking. Perfect for plunge cutting applications such as installing new dormers or removing old sections of roofs. Clean blade with solvent after each use.
ITEM NO. DIA. NO. OF TEETHFINISH
BL 725-B-CBRS 7-1/4" BLACK 14
Roofer’s Specialty Carbides Qty. - 1
Designed for smooth ripping and crosscutting in all types of wood, finish plywood, and prefinishedmaterials.
ITEM NO. DIA. NO. OF TEETHFINISH
Carbide Tipped Circular Saw Blades Qty. - 1
BLB725LCBR 7-1/4" SILVER 24
BLB7254740 7-1/4" SILVER 40
95
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
1/4-2P PHILLIPS BIT APXA44OP21/4-3P PHILLIPS BIT APXA44OP35/16-2P PHILLIPS BIT APXA480P25/16-3P PHILLIPS BIT APXA480P31/4-2 SLOTTED BIT APXA44521/4-3 SLOTTED BIT APXA44535/16-2 SLOTTED BIT APXA48525/16-3 SLOTTED BIT APXA48531/4 TX25 TORX BIT APXA440TX251/4 TX30 TORX BIT APXA440TX301/4 TX40 TORX BIT APXA440TX401/4 TX55 TORX BIT APXA440TX55
HEX SIZE ITEM # HEX SIZE ITEM #
Apex Bits & Holders Qty. - 1
5/16 TX30 TORX BIT APXA480TX305/16 TX40 TORX BIT APXA480TX405/16 TX55 TORX BIT APXA480TX551/4 x 3/16 SLOTTED BIT APXA44511/4 x 7/32 SLOTTED BIT APXA44521/4 x 1/4 SLOTTED BIT APXA44535/16 x 3/16 SLOTTED BIT APXA48515/16 x 7/32 SLOTTED BIT APXA48525/16 x 1/4 SLOTTED BIT APXA48531/4 x #2 Sq Bit 1” OAL APXA95021/4 x #2 Sq Bit 1-15/16” OAL APXA95421/4 HOLDER x 1/2 DR APXA8585/16 HOLDER x 1/2 DR APXA855
SlottedPhillips
Square
Holder
Torx
• Annealed • Galvanized
• High quality, low cost. • More cuts per blade • 100 pcs. per box
ITEM NO.
ITEM # MIARB
Single Edge Industrial Blades
GAUGEITEM #
Mechanic’s Wire
ROLL SIZE QUANTITY
MIAMEC16 16 5 Ib. 1
MIAMEC18 18 5 Ib. 1
3/4 x 60 yd. Masking tape MIBPA11" x 60 yd. Masking tape MIBPA21-1/2" x 60 yd. Masking tape MIBPA32" x 60 yd. Masking tape MIBPA44" x 72 yd. Mylar tape MIAM
3/4" x 66' Electrical tape MIAE3/4” x 60’ Electrical tape 3M MIAE3M3/4” x 52’ 3M+33 Elec. tape MIAE331/2 x 520" Teflon tape MIBT2" x 60 yd. Duct tape MIBD
DESCRIPTION ITEM # DESCRIPTION ITEM #
Tape
96
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
MBO01396 ROLOC GREEN 2" D. x 50 GRIT (25 PER BOX)MBO01397 ROLOC GREEN 2" D. x 36 GRIT (25 PER BOX)MBO01408 ROLOC GREEN 3" D. x 24 GRIT (25 PER BOX)MBO01407 ROLOC GREEN 3" D. x 36 GRIT (25 PER BOX)MBOBP2 BACKING PAD FOR 2” QUICK CHANGE DISCMBOBP2 BACKING PAD FOR 3” QUICK CHANGE DISCMBOBP7 BACKING PAD 7” WITH 5/8 -11 HUB
MBOFW160 FLAP WHEEL 1" D. x 60 GRITMBOFW180 FLAP WHEEL 1" D. x 80 GRITMBOFW1120 FLAP WHEEL 1" D. x 120 GRITMBOFW1240 FLAP WHEEL 1" D. x 240 GRITMBOFW1560 FLAP WHEEL 1.5" D. x 60 GRITMBOFW1580 FLAP WHEEL 1.5" D. x 80 GRITMBOFW15120 FLAP WHEEL 1.5" D. x 120 GRITMBOFW260 FLAP WHEEL 2" D. x 60 GRITMBOFW280 FLAP WHEEL 2" D. x 80 GRITMBOFW2120 FLAP WHEEL 2" D. x 120 GRITMBOFW2580 FLAP WHEEL 2.5" D. x 80 GRITMBOFW3120 FLAP WHEEL 3" W. x 120 GRITMBO24241 FLAP DISC 4.5” W. x 7/8" H. MBO24248 FLAP DISC 4.5" W. x 7/8” H x 80 GRIT
ITEM # WIDTH X LENGTH X GRIT
Emery Cloth
DESCRIPTION
ITEM # DIAMETER X GRITDESCRIPTION
MBOEC160 EMERY CLOTH 1" W. x 50 FT / 60 GRITMBOEC180 EMERY CLOTH 1" W. x 50 FT / 80 GRITMBOEC1120 EMERY CLOTH 1" W. x 50 FT / 120 GRITMBO5150 EMERY CLOTH 1" W. x 60 FT / 120 GRITMBOEC1180 EMERY CLOTH 1" W. x 50 FT / 180 GRITMBOEC1220 EMERY CLOTH 1" W. x 50 FT / 220 GRITMBO5156 EMERY CLOTH 1" W. x 60 FT / 320 GRITMBOEC1580 EMERY CLOTH 1.5" W. x 50 FT / 80 GRITMBOEC15120 EMERY CLOTH 1.5" W. x 50 FT / 120 GRITMBOEC15180 EMERY CLOTH 1.5" W. x 50 FT / 180 GRITMBOEC15220 EMERY CLOTH 1.5" W. x 50 FT / 220 GRITMBOEC15240 EMERY CLOTH 1.5" W. x 50 FT / 240 GRITMBOEC2180 EMERY CLOTH 2" W. x 50 FT / 180 GRITMBOEC2220 EMERY CLOTH 2" W. x 50 FT / 220 GRITMBOEC2240 EMERY CLOTH 2" W. x 50 FT / 240 GRITMBOEC2320 EMERY CLOTH 2" W. x 50 FT / 320 GRIT
MBORFD424 FIBER DISC 4" D. x 24 GRITMBORFD436 FIBER DISC 4" D. x 36 GRITMBORFD450 FIBER DISC 4" D. x 50 GRITMBORFD516 FIBER DISC 5" D. x 16 GRITMBORFD524 FIBER DISC 5" D. x 24 GRITMBORFD516 FIBER DISC 5" D. x 16 GRITMBORFD536 FIBER DISC 5" D. x 36 GRITMBORFD550 FIBER DISC 5" D. x 50 GRITMBORFD636 FIBER DISC 6" D. x 36 GRITMBORFD716 FIBER DISC 7" D. x 16 GRITMBORFD724 FIBER DISC 7" D. x 24 GRITMBORFD736 FIBER DISC 7" D. x 36 GRITMBORFD760 FIBER DISC 7" D. x 60 GRITMBORFD780 FIBER DISC 7" D. x 80 GRIT
MBOPSA660 FIBER DISC 6" D. x 60 GRITMBOPSA680 FIBER DISC 6" D. x 80 GRITMBOPSA6120 FIBER DISC 6" D. x 120 GRITMBOPSA6150 FIBER DISC 6" D. x 150 GRITMBOPSA6180 FIBER DISC 6" D. x 180 GRIT
Flap Wheels & Discs
Fiber Discs
PSA Disc Rolls
Roloc Discs and Backing Pads
Surface Conditioner Pads MBO7480 BROWN 2” COARSE (25 PER BOX)MBO7485 BROWN 3” COARSE (25 PER BOX)MBO7481 MAROON 2” MEDIUM (25 PER BOX)MBO7486 MAROON 3” MEDIUM (25 PER BOX)
To Order Call: 708-447-4500 or Outside Illinois 800-837-870797
* Also available in assortments. Refer to Page 137.
DUAL WALL
• 3:1 shrink ratio lined with a thick layer of a unique, dual-purpose sealant/adhesive, providingexcellent environmental sealing and adhesion to cable jackets• Abrasion resistant. Excellent chemical-resistant properties
• Rated for continuous use up to 600 volts at 194° F (90° C)• Meets UL 486D, CSA C22.2 #198.2, ANSI C1191.1 and Western Underground -
Guide #s 2.4 & 2.5
HEAVY WALL
ITEM #
Heat Shrink Tubing
NOMINALI.D. SIZE
EXPANDEDI.D. (MIN)
COLOR WIRE SIZERECOVERED
I.D. (MAX)RECOVERED
WALL
ITEM #
• 3:1 or 4:1 shrink ratio lined with an inner adhesive, providing excellent environmental sealingand adhesion to wire or cable jackets
• Flame retardant, cross-lined polyolefin outer wall. Excellent chemical-resistant properties• Outer-wall operating temperature of -67°F to 230°F (-55°C to 110°’C)• Over all, continuous operating temperature of -67°F to 230°F (-55°C to 110°C)• Meets MIL 1 23053/4 (Class 2) requirements - (Class 3 dimensionally)
NOMINAL I.D.SIZE
EXPANDEDI.D. (MIN)
WIRE SIZERECOVERED
I.D. (MAX)RECOVERED
WALL
• This low-cost, convenient heat gun is perfect for use in shrinking single-wall or dual-wall tubing• 120 Volts AC. Two temperature settings (750°F and 1100°F)• No cool down time required. Fold-down stand for hands free operation
Heat Gun
FTFHS81SRH 3/4" Red 6-2 ga. 0.750 0.240 0.090FTFHS81SBH 3/4" Black 6-2 ga. 0.750 0.240 0.090FTFHS240RH 1" Red I ga.-3/0 1.100 0.350 0.120FTFHS240BH 1" Black 1 ga.-3/0 1.100 0.350 0.120
FT2000
Flashers
550- 3-Prong 1 BBF550
552- 2-Prong 1 BBF552
850X- 3-Prong Electronic 1 BBF850X
852X- 2-Prong Electronic 1 BBF852X
DESCRIPTION QTY. ITEM # DESCRIPTION QTY. ITEM #
101
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Retro-fit (Top Mount and Side Mount)Retrofit for nonstacking top mount and side mount batteries and stackable for stacking top mount battery appli-cations. All terminals are made with the highest quality copper ingot and machine finished to exact specificationsand, of course, 100% tin-plated for corrosion protection.
Making sure the wire endis properly sealed, makethe terminal crimp connec-tion using a tool designedfor insulated splices.
Apply heat directly to thesplice, working from thecenter out to the edges,using a hot air gun or otherheat source, until the tubingshrinks and the adhesiveflows. Allow to cool beforeinspecting splice andchecking integrity.
ProblemsCorrosion on wire causes
voltage drop.
Wire pulled loose due to strain
or vibration.
Cannot see whether terminal is
properly installed.
SolutionsAdhesive-lined tubing prevents
corrosion on wire.
Translucent tubing allows visual
inspection of installation.
Adhesive-lined heat shrink tubing
and solder combine to increase
tensile strength.
Easy to install
• Assortments Available
See pages 106 to 107 for item #’s
* Add SHS to vinyl item #
* Add HS to vinyl item #
109
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Airbrake Tubing (Synflex) 100’ foot roll
• Available from inventory in a large variety of colors and sizes• Excellent durability and weather resistance• UV and ozone protected• Meets or exceeds SAE J844 (Type A non-reinforced & Type B-reinforced)• Meets or exceeds DOT requirements for use with compression fittings • Designed to operate at up to 150 psi in automotive airbrake systems• Operating temperature range of -40ºF to200ºF• Resistant to attack by gasoline, diesel fuel and commonly-used road and cleaning chemicals
• Coiled, 1/2” O.D., reinforced, nylon tubing• Excellent coil memory and durability• Color-coded (red-emergency/blue-service)• Meets SAE J844 and DOT-FMVSS 106 (49 CFR 571.106 & 49 CFR 393.45)• Designed for 150 psi operating systems and a -40ºF to 150º temperature range• Resistant to attack by gasoline, diesel fuel, methyl-alcohol and zinc chloride• Male pipe, brass fittings• Plated steel, spring guards
110
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
MIARH06 3/8" 3/4" 225 900 3-1/2"
MIARH08 1/2" 7/8" 225 900 4"
• The uniform, dual-braided design, consisting of four, interwoven spirals provides greater flexibilityand improved twist resistance as compared to other spiral designs
• Layers of the hose wall are fully bonded to enhance kink resistance, enabling tighter bendswhere necessary
• The rugged, elastomeric hose cover is resistant to gasoline, diesel fuel, oil and commonly usedroad & cleaning chemicals
• The hose cover is perforated to allow moisture to escape from the reinforcement layer
• Operating temperature of -40°F to +200°F
• Designed to provide flexible air-connection from frame to axle or between tractor and trailerswhere exposed to flexing, pulling or impact
Airbrake Hose Qty. - 250’ spool
AVAILABLE SIZES
NOMINAL NOMINAL WORKING MIN. BURST MINIMUM
ITEM # I.D. O.D. PRESSURE PRESSURE BEND
(PSI) (PSI) RAD.*
• Specially designed, permanently attached, end-fittings provide assurance of proper fitting reten-tion and hose assembly life
• Factory tested to ensure maximum quality
• Available from stock in a wide selection of lengths and end-configurations
• Custom lengths and configurations are available on a quick turnaround basis
• Also available with factory-assembled, reusable, end-fittings
Air Brake (Ball Sleeve)• Used WIth: Copper Tubing & Nylon Air Brake Tubing• Typical Application: Air Brake Systems• Pressure: 150PSI• Sealing Method: 3-Piece Compression• Vibration Rating : Fair• Temperature Rating: -65º F to +250ºF with copper tubing• Material: CA360 Brass• Advantages: Easy to assemble (no flaring). Meets DOT
and SAE specifications. May be used with nylon tubing by replacing long nut and spherical sleeve with insert, rigid sleeve and nut.
Air Brake Hose Ends (Sleeve Type)• Pressure: 125 PSI• Sealing Method: 3 Piece Compression• Used With: H338 hose• Typical Application: Air Brake Systems• Material: CA360 Brass• Advantages: Easy to assemble and disassemble.• Meets: SAE and DOT specifications• Ordering information: Order by catalog number for
complete assembly (body, nut and sleeve). Bodies,nuts, and sleeves can be ordered seperately by catalog number
Assembly Instructions
1. Slide nut and sleeve onto hose. Make sure beveledge of sleeve faces out toward fitting.
2. Push hose into fitting until it bottoms.3. Screw nut until contact is made with body hex.
ABSSIZE ITEM #
10 3/8 BFAHS125 1/2 BFAHS14
Sleeve
HOSEI.D.
10 3/8 BFAHN125 1/2 BFAHN14
Nut
HOSEI.D. ITEM #
3/8 BFAHU121/2 BFAHU14
Hose Union
HOSEI.D. ITEM #
3/8 BFAHSP
Nut Spring Guard
Swivel-Air Brake Adapter only-w/Male Pipe
3/4-20 x 1/4 BFABSA643/4-20 x 3/8 BFABSA66
Swivel-Air Brake Connectors Hose to Special Female Thrd.
3/4 x 3/8 x 3/4-20 BFABSA12A
ITEM #
Bulkhead Coupling, Steeel
MALEPIPETHD.
FEM.PIPETHD.
To order Male Connector as assembly with sleeve and nut add “A” to Item #.
To order Male Connector as assembly with sleeve and nut spring add “AS” to Item #.
Ex. BFAHC126A
Ex. BFAHC126AS
Package Quantity for Air Brake Fittings, - 5
1/2 x 3/8 x 1-3/4 BFBH11304
Also available in assortments, refer to page 130.
TUBEO.D.
MALE PIPETHREAD ITEM #
Male Run Tee
Sleeve
Nut
Male Connector
Union
ITEM #
Male Branch Tee
45º Male Elbow
113
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707Also available in assortments, refer to page 132.
Air Brake• Pressure: Maximum 150PSI• Sealing Method: 3 Piece Compression• Vibration Rating: Fair• Temperature: -40º F to 200 º F• Material: CA360 Brass• Used with: DOT Nylon Tubing & Copper Tubing• Typical Application: Air Brake Systems except
where temperatures do not exceed 200º F orwhere battery acid cannot drip on tubing.
• Advantages: Easy to assemble(no tube preperationor bending required). Built in tube support. MeetsSAE and D.O.T. standards. May be used with cop-per tubing by replacing nut, sleeve, and insert withlong nut and spherical sleeve.
• Identifying Charateristics: Designation “DOT” or“AB” stamped on fitting turn diameter. Short nutwill be used on plastic air brake tubing.
and Natural Gas.• Pressure: Up to 2000 PSI. • Temperature: -65º F to + 250º F • Used With: Copper, Steel, Brass, Aluminum and Bundy Tubing. • Meets specifications and standards of ASA, ASME, and SAE, and MS (Military Standards).
• Applications: Instrumentation,Hydraulic and Pneumatic Systems• Pressure: Up to 2000 PSI. •Temperature: -65º F to + 250º F• Used With: Copper, Aluminum, or Plastic Tubing.
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
123
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
L.A. Fasteners is an Aeroquip Express center. What does this mean to you? It
means better selection, better pricing, and of course hoses made while you wait.
L.A. carries all types of hydraulic hoses, hose protectors, fittings, couplers, and
adapters. From common pipe and JIC styles to metric, BSP and all combinations
in between, you can be sure everything you need is in stock.
L.A. also carries Dixon, Europower
Ask about our complete line of Aeroquip products
or vist our website: www.lafasteners.com
Voss Metric Fittings
124
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Voss Metric Tube Fittings conform in design and dimensions to the latest DIN standards. They are, in general, equivalent to BS 4368 parts 1 & 3. Pressure ratings are in accordance with DIN 2401. The ratedpressure apply to a dead load and temperatures of up to 120º C as admissible working pressures with a 4-fold safety factor.
Voss Metric Tube Fittings are manufactured from forged or drawn high quality steel. Fittings are anodizedand oiled or zinc plated.
Voss, Incorporated warrants its Metric Tube Fittings to be from defects in materials and workmanship when properly installed and maintained. If a fitting has failed in service, Voss Incorporated, at its option, will replace the fitting or issue the purchaser credit.
In addition to fittings in this catalog, Voss Incorporated can manufacture fittings of other materials in sizesand configurations to meet special application requirements.
125
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Safety EquipmentEAR MUFFS EAR PLUGS GOGGLES
Industrial Batteries & FlashlightsAA & AAA - CELL BATTERIES C & D- CELL BATTERIES 9 - VOLT BATTERY RUBBER FLASHLIGHT
Surveyor’s reflective safety vest Item # SALUXSSLSDZXL
Safety ConeItem # SA3004057
Hard HatITEM # SA61YLP
SAFETY VEST
Ask about our 272 page full line safety products catalog
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
.157 SNAP PLUG
T24149
16-14 FORK
T24119
.157 FEMALE PLUG
T4285
22-18BUTT CONNECTOR
T24128
22-18 #10 EYE
T24102
12-10MALE QUICK SLIDE
T24152
12-10FEMALE QUICK SLIDE
T24153
16-14 X #8 EYE
T24104
16-14 X #10 EYE
T24106
16-14 X 1/4 EYE
T24107
16-14 X 3/8 EYE
T24109
Vinyl Wire Terminal Assortment #LA110
12-10BUTT CONNECTOR
T24131
12-10 X #10 EYE
T24112
12-10 X 1/4 EYE
T24113
12-10 X 5/16 EYE
T24114
12-10 X 3/8 EYE
T24115
16-14BUTT CONNECTOR
T24130
16-14MALE QUICK SLIDE
T24126
16-14FEMALE QUICK SLIDES
T24127
16-14 HOOK
T24124
16-143 WAY BUTT CONNECTOR
T30491
18-16QUICK SLIDE
J3283
12-10 X 1/2 EYE
T24151
16-14 SELFSPLICING TERMINAL
T24150
126
.157 SNAP PLUG
T24149HS
16-14 FORK
T24119HS
.157 FEMALE PLUG
T4285HS
22-18BUTT CONNECTOR
T24128HS
22-18 #10 EYE
T4102HS
12-10MALE QUICK SLIDE
T24152HS
12-10FEMALE QUICK SLIDE
T24153HS
16-14 X #8 EYE
T24104HS
16-14 X #10 EYE
T24106HS
16-14 X 1/4 EYE
T24107HS
16-14 X 3/8 EYE
T24109HS
Heat Shrink Wire Terminal Assortment #LA110HS
*Also available in Solder Heat Shrink (Item #LA110SHS)
12-10BUTT CONNECTOR
T24131HS
12-10 X #10 EYE
T24112HS
12-10 X 1/4 EYE
T24113HS
12-10 X 3/8 EYE
T24115HS
12-10 X 1/2 EYE
T24151HS
16-14BUTT CONNECTOR
T24130HS
16-14MALE QUICK SLIDE
T24126HS
16-14FEMALE QUICK SLIDES
T24127HS
On the following 8 pages, complete assortments are furnished in labeled metal trays. For more information on quantities in each assortment, refer to the particular assortment on the following pages.
The tray size measures 18”w x 12”d x 3h”. Four of these trays can be held in a cabinet #1300 for convenience. Custom trays can also be made at your request.
127
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Grade 5 USS Zinc Plated-#LA100 • Grade 8 USS Zinc Plated-#LA102
PH & HH Tek Screw Assortment #LA142Tube Clamp Assortment #LA141
Nylon Tie Assortment #LA140Shrink Tube Assortment #LA139
133
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
1/4”
J2662
5/8”
J2666
1”
J2669
5/16”
J2663
3/4”
J2667
1”
J2669
3/8”
J2664
7/8”
J2668
1-1/4”
J2670
1/2”
J2665
7/8”
J2668
1-1/4”
J2670
8 x 3/4 PHSMSTKPO803
8 x 1 PHSMSTKPO810
10 x 3/4 PHSMSTKP1003
10 x 1 PHSMSTKP1010
14 x 3/4 PHSMSTKP1403
14 x 1 PHSMSTKP1410
8 x 3/4 HHSMSTKHO803
8 x 1 HHSMSTKHO810
10 x 3/4 PHSMSTKP1003
10 x 1 HHSMSTKH1010
10 x 1-1/2 HHSMSTKH1012
12 x 3/4 HHSMSTKH1203
12 x 1 HHSMSTKH1210
12 x 1-1/2 PHSMSTKH1212
8 x 3/4 PHSMSTKPO803
8 x 3/4 PHSMSTKPO803
14 x 1-1/2 HHSMSTKPH1412
14 x 2 HHSMSTKH1420
Drive Rivet 3/16 x .475DR101470613
RIVET STL/STL 3/16 DIA 1/4G
ADSD64BS
RIVET STL/STL LRG FLNG 3/16 DIA 3/8G
ADSD66BS
RIVET ALU/ALU 3/16 DIA 1/8G
AD62ABS
RIVET ALU/STL LRG FLNG 3/16 DIA 5/8G
AD610ABSLF
Drive Rivet 3/16 x .175DR101170613
RIVET STL/STL 1/8 DIA 1/4GADSD42BS
RIVET STL/STL 3/16 DIA 3/8G
ADSD66BS
RIVET ALU/STL 3/16 DIA 1/2G
AD68ABS
RIVET ALU/ALU3/16 DIA 1/4G
AD64ABS
Drive Rivet 3/16 x .275DR101270613
RIVET STL/STL LRG FLNG 1/8 DIA 1/4G
ADSD42BS
RIVET STL/STL 1/8 DIA 1/8GADSD42BS
RIVET ALU/STL 3/16 DIA 1/2G
AD68BS
RIVET ALU/ALU3/16 DIA 1/2G
AD68ABS
Drive Rivet 3/16 x .375DR101370613
RIVET STL/STL 3/16 DIA 1/8G
ADSD62BS
RIVET STL/STL 3/16 DIA 1/4G
ADSD64BS
RIVET ALU/ALU 1/8 DIA 1/4G
AD44ABS
RIVET ALU/ALU3/16 DIA 3/16G
AD66ABS
SAE 45O SWIVEL 1/4 HOSE FEM
AF44014
SAE 45O SWIVEL 3/8 HOSE FEM
AF44016
UNIVERSAL SAE/JIC FEM SWIVEL ELBOW 1/4
AF1902964
JIC UNION 1/4AF202744
SAE 45O FLARE UNIONBFSFU6
JIC 37O SWIVEL 3/8 HOSE FEM
AF44116
SAE 45O SWIVEL ELBOW 3/8AF1903026
JIC UNION 3/8AF202766
SAE 45O SWIVEL 1/2 HOSE FEM
AF44018
UNIVERSAL SAE/JIC FEM SWIVEL ELBOW 1/2
AF1902968
JIC UNION 1/2AF202788
SAE 45O SWIVEL 1/2 HOSE FEM
AF440110
UNIVERSAL SAE/JIC FEM SWIVEL ELBOW 5/8
AF44014
JIC UNION 5/8AF20271010
FUSMIN3 FUSMIN4
FUSMIN25
FUSATO10
FUSATO30
FUSMAX30
FUSMIN5
FUSMIN30
FUSATO15
FUSATO40
FUSMAX40
FUSMIN750
FUSATO3
FUSATO20
FUSATO50
FUSMAX50
FUSMIN10
FUSATO4
FUSATO25
FUSATO60
FUSMAX60
FUSMIN15
FUSATO5
FUSATO30
FUSMIN20
FUSATO750
FUSATO20
FUSMAX20
6-32 NUTS HNM01
8-32 NUTS HNM02
10-24 NUTS HNM04
12-24 NUTS HNM05
10-32 NUTS HNM03
#6 FLATWASHERWWM01
6-32 X 1 MSPH063210
8-32 X 1 MSPH083210
10-24 X 1 MSPH0102410
12-24 X 1 MSPH0122410
10-32 X 1 MSPH0103210
#8 FLATWASHERWWM02
6-32 X 3/4MSPH063203
8-32 X 3/4 MSPH083203
10-24 X 3/4 MSPH0102403
12-24 X 3/4 MSPH0122403
10-32 X 3/4MSPH0103203
#10 FLATWASHERWWM03
6-32 X 1/2 MSPH063202
8-32 X 1/2 MSPH083202
10-24 X 1/2 MSPH0102402
12-24 X 1/2 MSPH0122402
10-32 X 1/2 MSPH0103202
#12 FLATWASHERWWM05
Air Hammer Accessory Assortment #LA157
Metric 8.8 Coarse Thread Assortment #LA160
Metric 8.8 Fine Thread Assortment #LA161Air Brake Assortment #LA146
Rubber Grommet Assortment #LA156
Solder Heat Shrink Assortment #LA110SHS
134
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
22-18 #10 RINGT24102SHS
14-16 #6 RINGT24104SHS
12-10 1/4 RINGT24113SHS
22-18 BUTT CONNECTORT24128SHS
12-10 #10 RINGT24112SHS
16-14 #10 RINGT24106SHS
12-10 3/8 RINGT24115SHS
16-14 BUTT CONNECTORT24130SHS
16-14 1/4 RINGT24107SHS
16-14 #10 FORKT24119SHS
12-10 BUTT CONNECTORT24131SHS
12-10 #10 RINGT24112SHS
12-10 #10 SPADET24122SHS
12-10 1/2 RINGT24151SHS
AJT16103/16 Mod-Rivet Setter
AJT16203/16 Full Brazier/ 1/4 Mod.Rivet Setter
AJT16211/2 Full Brazier Rivet Setter
AJT45081/4 Door Rivet Setter
AJT905Wide Scraper .401 Shank
AJT907Claw Panel Cutter
AJT895Beehive springs for CP714
AJT897Quick Release Spring for CP714 Air Hammer
AJT909Straight Panel Cutter
AJT910Flat Chisel .401 Shank
AJT911Tapered Punch .401 Shank
AJT912Straight Rivet Cutter
1/8ID x 1/4G x 11/32OD x 3/16TGRODC5102
5/16ID x 7/16G x 9/16OD x 3/16TGRODC5108
3/8ID x 1/2G x 5/8OD x 1/4TGRODC5112
3/16ID x 5/16G x 7/16OD x 1/4TGRODC5150
1/2ID x 3/4G x 1OD x 5/16TGRODC5158
5/8ID x 7/8G x 1-1/8OD x 3/8TGRODC5160
7/8ID x 1-1/4G x 1-5/8OD x 1/2TGRODC5166
1ID x 1-3/8G x 1-3/4OD x 1/2TGRODC5168
1/4ID x 7/16G x 5/8OD x 5/16TGRODC5180
3/4ID x 1-1/16G x 1-3/8OD x 9/16TGRODC51
1ID x 1-3/8/4G x 1-3/4OD x 5/8TGRODC5194
HEX NUTS 8(1.25)
MMHNF08
8MMFLAT WASHERLOCK WASHER
MMWWO8 MMLW08
8 X 16 HEXCAP SCREWMMHCF0816
8 X 25 HEXCAP SCREWMMHCF0825
8 X 40 HEXCAP SCREWMMHCF0840
8 X 50 HEXCAP SCREWMMHCF0850
HEX NUTS 10(1.50)
MMHNF10
10MMFLAT WASHERLOCK WASHER
MMWW10MMLW10
10 X 25 HEXCAP SCREWMMHCF1025
10 X 40 HEXCAP SCREWMMHCF1040
10 X 50 HEXCAP SCREWMMHCF1050
10 X 60 HEXCAP SCREWMMHCF1060
HEX NUTS 12(1.75)
MMHNF12.
12MMFLAT WASHERLOCK WASHER
MMWW12 MMLW12
12 X 30 HEXCAP SCREWMMHCF1230
12 X 40 HEXCAP SCREWMMHCF1240
12 X 50 HEXCAP SCREWMMHCF1250
12 X 60 HEXCAP SCREWMMHCF1260
HEX NUTS 14(1.5)
MMHNF14
14MMFLAT WASHERLOCK WASHER
MMWW14 MMLW14
14 X 30 HEXCAP SCREWMMHCF1430
14 X 40 HEXCAP SCREWMMHCF1440
14 X 60 HEXCAP SCREWMMHCF1460
14 X75 HEXCAP SCREWMMHCF1475
HEX NUTS 8(1.25)
MMHNC08
8MMFLAT WASHERLOCK WASHER
MMWWO8 MMLW08
8 X 16 HEXCAP SCREW
MMHCC0816
8 X 25 HEXCAP SCREW
MMHCC0825
8 X 40 HEXCAP SCREW
MMHCC0840
8 X 50 HEXCAP SCREW
MMHCC0850
HEX NUTS 10(1.50)
MMHNC10
10MMFLAT WASHERLOCK WASHER
MMWW10MMLW10
10 X 25 HEXCAP SCREW
MMHCC1025
10 X 40 HEXCAP SCREW
MMHCC1040
10 X 50 HEXCAP SCREW
MMHCC1050
10 X 60 HEXCAP SCREW
MMHCC1060
HEX NUTS 12(1.75)
MMHNC12
12MMFLAT WASHERLOCK WASHER
MMWW12 MMLW12
12 X 30 HEXCAP SCREW
MMHCC1230
12 X 40 HEXCAP SCREW
MMHCC1240
12 X 50 HEXCAP SCREW
MMHCC1250
12 X 60 HEXCAP SCREW
MMHCC1260
HEX NUTS 14(1.5)
MMHNC14
14MMFLAT WASHERLOCK WASHER
MMWW14 MMLW14
14 X 30 HEXCAP SCREW
MMHCC1430
14 X 40 HEXCAP SCREW
MMHCC1440
14 X 60 HEXCAP SCREW
MMHCC1460
14 X75 HEXCAP SCREWMMHCC1475
135
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Pipe Nipple Assortment #LA171PFCN2
1/8 CloseNipple
PFCN41/4 Close
Nipple
PFCN63/8 Close
Nipple
PFCN81/2 Close
Nipple
PFCN123/4 Close
Nipple
PFCN161 CloseNipple
PFCN201-1/4 Close
Nipple
PFLN4121/4 X 1-1/2
Nipple
PFLN6123/8 X 1-1/2
Nipple
PFLN8121/2 X 1-1/2
Nipple
PFLN12203/4 X 2Nipple
PFLN16201 X 2Nipple
PFLN20201-1/4 X 2
Nipple
PFLN4201/4 X 2Nipple
PFLN6203/8 X 2Nipple
PFLN8201/2 X 2Nipple
PFLN12223/4 X 2-1/2
Nipple
PFLN16221 X 2-1/2
Nipple
PFLN20221-1/4 X 2-1/2
Nipple
PFLN4221/4 X 2-1/2
Nipple
PFLN6223/8 X 2-1/2
Nipple
PFLN8221/2 X 2-1/2
Nipple
PFLN12303/4 X 3Nipple
PFLN16301 X 3Nipple
PFLN20301-1/4 X 3
Nipple
PFLN4301/4 X 3Nipple
PFLN6303/8 X 3Nipple
PFLN8301/2 X 3Nipple
PFLN12403/4 X 4Nipple
PFLN16401 X 4Nipple
PFLN20401-1/4 X 4
Nipple
Pipe Nipple Assortment #LA170
PFP21/8 Sq Plug
PFP41/4 Sq Plug
PFP63/8 Sq Plug
PFP81/2 Sq Plug
PFP123/4 Sq Plug
PFP161 Sq Plug
PFP201-1/4
Sq Plug
PFB421/4 x 1/8
HX Bushing
PFB623/8 x 1/8
HX Bushing
PFB643/8 x 1/8
HX Bushing
PFB841/2 x 1/4
HX Bushing
PFB861/2 x 3/8
HX Bushing
PFB1263/4 x 3/8
HX Bushing
PFB1283/4 x 1/2
HX Bushing
PFB1681 x 1/2
HX Bushing
PFB16121x 3/4
HX Bushing
PFB20121-1/4 x 3/4HX Bushing
PFB20161-1/4 x 1
HX Bushing
PFC21/8
Coupling
PFC41/4
Coupling
PFC63/8
Coupling
PFC81/2
Coupling
PFC123/4
Coupling
PFC161 Coupling
PFC201-1/4
Coupling
PFE42450 1/8ELbow
PFE44450 1/4ELbow
PFE46450 3/8ELbow
PFE48450 1/2ELbow
PFE412450 3/4ELbow
PFE416450 1ELbow
PFE420450 1-1/4
ELbow
PFE92900 1/8ELbow
PFE94900 1/4ELbow
PFE96900 3/8ELbow
PFE96900 1/2ELbow
PFE912900 3/4ELbow
PFE916900 1ELbow
PFE920900 1-1/4
ELbow
PFS92900 1/8STR EL
PFS94900 1/4STR EL
PFS96900 3/8STR EL
PFS98900 1/2STR EL
PFS912900 3/4STR EL
PFS916900 1STR EL
PFS920900 1-1/4
STR EL
PFT21/8 Tee
PFT41/4 Tee
PFT63/8 Tee
PFT81/2 Tee
PFT123/4 Tee
PFT161 Tee
PFT201-1/4 Tee
PFR421/4 x 1/8 Reducer
PFR643/8 x 1/4 Reducer
PFR861/2 x 3/8 Reducer
PFR1283/4 x 1/2Reducer
PFR16121 x 3/4
Reducer
PFR20161-1/4 x 1 Reducer
136
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
Air Brake & Pipe Fittings #LA155
BFPLS63/8 Sleeve
BFPLS81/2 Sleeve
BFAHS123/8 Sleeve
PFP21/8 PLUG
PFP41/4 PLUG
PFP63/8 PLUG
PFP81/2 PLUG
PFP123/4 PLUG
BFPLIN63/8 Insert
BFPLIN81/2 Insert
BFAHN123/8 Nut
PFCN21/8 Nipple
PFCN41/4 Nipple
PFCN63/8 Nipple
PFCN81/2 Nipple
PFCN123/4 Nipple
BFPLN63/8 Nut
BFPLN81/2 Nut
BFAHSP3/8 Spg-Nut
PFC21/8 Coupling
PFC41/4 Coupling
PFC63/8 Coupling
PFC81/2 Coupling
PFC123/4 Coupling
BFPLU63/8 Union
BFPLU81/2 Union
BFAHC124A3/8 X 1/4P
PFT21/8 Tee
PFT41/4 Tee
PFT63/8 Tee
PFT81/2 Tee
PFT123/4 Tee
BFPLT63/8 Tee
BFPLT81/2 Tee
BFAHC126A3/8 X 3/8P
QTY. 12
PFS921/8 ST 90
PFS941/4 ST 90
PFS963/8 ST 90
PFS981/2 ST 90
PFS9123/4 ST 90
BFPLC643/8 X 1/4
BFPLC841/2 X 1/4
BFAHC128A3/8 X 1/2P
PFS421/8 ST 45
PFS441/4 ST 45
PFS463/8 ST 45
PFS481/2 ST 45
PFS4123/4 ST 45
BFPLC663/8 X 3/8
BFPLC861/2 X 3/8
BFPLE841/2 X 1/4P
BFDA41/4 Valve
PFB421/4 x1/8Bushing
PFB623/8 x1/8Bushing
PFB841/2 x1/4Bushing
PFB1283/4 x1/2Bushing
BFPLC683/8 X 1/2
BFPLC881/2 X 1/2
BFPLE861/2 X 3/8P
BFDA441/4 x 1/4
Valve
BFBH113041/2 x3/8x1-3/4
Bulkhead
PFB643/8 x1/4Bushing
PFB861/2 x 3/8Bushing
MLT7111/4
3/8 Hose Set
BFPLE643/8 X 1/4P
BFPLE663/8 X 3/8P
BFPLE683/8 X 1/2P
BFPLE881/2 X 1/2P
MLT7151/4 Coupler
MLT7183/8 Coupler
MLT7281/4
Female Plug
MLT7271/4
Male Plug
137
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707
BIN18H Threaded Rod Cabinet
DESCRIPTIONITEM #
BIN72H 72 HOLE BIN WIDTH 33 3/4 HEIGHT 42 DEPTH 12BIN42H 42 HOLE BIN WIDTH 33 3/4 HEIGHT 42 DEPTH 12BIN40H 40 HOLE BIN WIDTH 33 3/4 HEIGHT 24 DEPTH 12BIN24H 24 HOLE BIN WIDTH 33 3/4 HEIGHT 24 DEPTH 12BINB BASE FOR BINS WIDTH 33 3/4 HEIGHT 8 DEPTH 12
DESCRIPTIONITEM # DIMENSIONS IN INCHES
Storage Bins
BIN1300 Storage Cabinet for large scoop drawers
BIN1400 Storage Cabinet for small scoop drawers
DESCRIPTIONITEM #
Large Scoop Drawers 18 x 12 x 3BIN1306 6BIN1312 12BIN1316 16 (PICTURED)BIN1320 20BIN1324 24 Small Scoop Drawers 13 x 9 x 2BIN1412 12BIN1416 16 (PICTURED)BIN1420 20BIN1424 24
ITEM # NUMBER OF COMPARTMENTS
BIN907 Hose Clamp Rack
DESCRIPTIONITEM #
138
To Order Call: 708-447-4500 or Outside Illinois 800-837-8707