Kuryakyn Products

Kuryakyn Products

1

Honda Models

131026 SOLD AS KIT

Fits VTX 1300 models from 2003 thru 2006

Yamaha Models

131024 SOLD AS KIT

Fits V Star 650 models from 1998 thru 2006*

131025 SOLD AS KIT

Fits V Star 1100 models from 1999 thru 2006

131022 SOLD AS KIT

Fits Road Star 1600 / 1700 (ex. Warriors) models from 1999 thru 2006

Note : *We recommend that Hypercharger installation and jetting on the 650 V Star be performed by a Yamaha Dealer orother qualified technician.

Kawasaki Models

131020 SOLD AS KIT

Fits Vulcan 800 models from 1995 thru 2006

131015 SOLD AS KIT

Fits Vulcan 1500 (single carb) models from 1995 thru 2004

131017 SOLD AS KIT

Fits fuel injected Vulcan 1500 / 1600 models including MeanStreak

Replacement Component :

131011 SOLD AS KIT

Replacement filter for Hypercharger

HyperchargerSince their introduction in 1992, TheHypercharger has been widely recognized as one of the most costeffective performance modificationsavailable. When the demand arose foradaptation to the Metric Cruisers weexpected performance increases, butnever expected to see the gain commonon these engines. The performanceincrease comes from simply letting theengine breathe. No decrease in longevityor drivability should be expected afternormal, careful installation and properjetting. Aside from the desirable gains inperformance, the Hypercharger is one ofthe most striking enhancements you canmake to your bike. The cases are beautifully chromed with trap doors andbutterflies available separately in a widearray of colors.

Trap Doors

131006 SOLD EACH

Chrome plated trap door for Hypercharger.

131003 SOLD EACH

Black trap door for Hypercharger.

131004 SOLD EACH

Candy Red trap door for Hypercharger.

131005 SOLD EACH

Candy Blue trap door for Hypercharger.

Butterflies

131010 SOLD IN PAIRS

Chrome plated butterflies for Hypercharger.


Black plated butterflies for Hypercharger.


Candy Red plated butterflies for Hypercharger.


Candy Blue plated butterflies for Hypercharger.

Create a new looking in minutes. Choose from the variety ofplated or powder coated colors to give your Hyperchargerthe exact look you’ve been searching for.

Note : These butterflies are not compatible with the Proseries Hypercharger.

Standard Trap Doors & Butterflies

2

Kuryakyn Products

Pro Series Hypercharger Kits

Honda Models

131018 SOLD AS KIT


131021 SOLD AS KIT


Yamaha Models

131023 SOLD AS KIT

Fits Road Star 1600 / 1700 (ex. Warrior) models from 1999 thru 2006

Kawasaki Models

131016 SOLD AS KIT

Fits Vulcan 1500 (single carb) models from 1995 thru 2004

131019 SOLD AS KIT

Fits all fuel injected Vulcan 1500 / 1600 models includingMean Streak.

The Pro Series Hypercharger was designed for massive airhungry V-Twin mills that like lots of RPMs. If your motorneeds air, here’s the place to start. The inlet is cavernous.The filter area has been increased by a full 50%. Internalshapes have been tweaked to allow increased flow andvelocity. The “Pro” has a look all its own. All edges areradiused for a more streamlined appearance and a completely new cover with speed lines completes this picture of performance.

Note : These kits contain an all-chrome pro seriesHypercharger, mounting kit and carburetor jetting wherenecessary for a complete, sanitary installation.

Replacement Component :

131012 SOLD AS KIT

Replacement K&N filter for Pro-Series Hypercharger

131002 SOLD EACH

Chrome blood groove trap door forHypercharger.

131001 SOLD EACH

Black blood groove trap door forHypercharger.

Create a new looking in minutes.Choose from either chrome plated orblack powder coated colors to giveyour Hypercharger a different look.

Blood Groove Trap Doors forHypercharger

131013 SOLD EACH

Main air filter element for the originalTwin Velocity air cleaner.

131014 SOLD EACH

Small air filter element for the originalTwin Velocity air cleaner.

Air Filter for Twin VelocityAir Cleaners

Kuryakyn Products

3

150017 SOLD AS SET

Fits Road Star 1600 and 1700 models (excluding Warrior).

Add some sparkle to the right side ofyour motor with these stylized chromeTappet Block Covers and trim piece.These metal covers bolt directly overthe bottom of your pushrod tubes andfinish off by installing the bottom trimpiece. Stand back and look at thechrome flowing from your pushrodtubes all the way down your bike. Addthe Cylinder Base Covers PT# 150018to complete the new chromed base ofyour motor.

Tappet Block Covers


Fits Road Star 1600 models.

150020 SOLD AS PAIRS

Fits Road Star 1700 models (excluding Warrior) .

Connect the chrome between yourvalve covers and push rod tubes onthe right side of your motor and coverthat large black void. These littleaccents will really class up your ride.

Push Rod Top Covers

150010 SOLD IN SET OF 3

Fits VTX 1800 models from 2002 thru2006.



Dress up your plain chrome enginecovers with these racy, speed-linedengine cover inserts. Sold in sets of 3,our molded ABS chrome plated insertsstick to the smooth clutch, timing, andleft crankcase covers adding depthand a “machined from billet” look.Easily installed without tools.

Engine Cover Inserts


Fits Road Star 1700 models (excludingWarrior).

Fill the gaping hole around your sparkplugs and amaze your friends with theclean full look of your motor. These little beauties simply install into thespark plug area and are a must have.

Finned Spark Plug Covers


Fits VTX 1800 models from 2002 thru2006. Red / Blue LED Backlit


Fits VTX 1800 models from 2002 thru2006. Red LED Backlit


Fits VTX 1800 models from 2002 thru2006. Blue LED Backlit

These are hot! Replace your plainstock spark plug covers with thesetrick new custom covers with coloredLED backlighting. This slotted design isaccented by a colored LED glow. Purehigh tech! installation is a snap.

Spark Plug Covers


Fits Valkyrie and Valkyrie Tourer models


Fits Valkyrie Interstate models

These exciting new covers place andextra dollop of chrome on an alreadydeliciously sparkling engine. Onceinstalled, almost all of the cast surfaceis replaced with a beautiful show-chromed finish.

Intake Runner -Spark Plug Cover

150023 SOLD EACH

Fits Road Star 1600 and 1700 models(excluding Warrior).

Customize your Road Star and addthat little extra class with the look ofmotion to your front drive pulley cover.Simple installation will take you seconds and you will be amazed at thedifference this little beauty will do foryour ride.

Front Drive Pulley Cover

4

Kuryakyn Products

150007 SOLD EACH


Complete the creamy, luscious appearance of your VTX 1800 withthese new Engine Case Covers that fitsnugly along the base of the enginebelow the fins on both sides. They looklike expensive, chromed-engine cases,but they bolt on in minutes and cost aheck of a lot less.

Engine Case Covers

150012 SOLD EACH


We Designed this part to finish off thejob started by our Engine Case Covers.Stamped steel, chrome plated construction installs quickly and easilywith industrial strength adhesive tapeto cover the exposed upper surface ofthe clutch housing. Intended only foruse with our Engine Case Covers, PT#150007.

Clutch Housing Shroud

150002 SOLD EACH


Precision-cut from steel, polished to amirror-like finish, then chrome-plated,these Motor Mount Accents pull double duty for you. They cover theplain, black motor mount while filling insome of the “dead space” around theengine. Three of the mounts are slotted, adding style and allowing youto backlight them for a spectacular,vibrant look. Our engine case coversfor VTX, PT# 150007, take care of thefront motor mounts, but leave the rearmounts exposed. We’ve added a kitwith just the rear mount covers for thatapplication.

Motor Mount Accents

150018 SOLD AS SET

Fits Road Star 1600 and 1700 models(excluding Warrior).

Chrome the left side of your motor andtop of your transmission with thesechromed metal covers. With simpleinstallation, flow chrome over yourmotor and get that expensive chromedmotor look in minutes. Add the TappetBlock Covers PT# 150017 and add thatchrome sparkle to the base of the rightside. You will be amazed at the difference these make.

Note : fully dress your motor with additional Yamaha OEM chrome motorcovers.

Engine Cylinder Base Covers

167000 SOLD EACH

Fits :Honda VTX 1300 models.Yamaha Road Star 1600, Road StarVenture, V Star 1100 and V Star 650models.Kawasaki 800 and 1500 Vulcan models.

Our attractive chrome choke knobcover installs easily without removingor modifying the stock choke knob.

Marquis Choke Knob Cover

Kuryakyn Products

5


Fits VTX 1800 C and Retro modelsfrom 2002 thru 2003.

Instant pizzazz! Add this classy chromeand LED trim to the sides of your VTX1800 Radiator and watch it come alive.Sturdy, gleaming chrome inserts attacheasily and really dress up a part of thebike the factory tries to camouflage. Anarray of LED’s provide a stock detailand increase visibility by functioning asadditional running lights and turn signals.

Radiator Side Trim

150005 SOLD EACH

Fits Metric custom applications.

A great dress-up item for your radiator!A beautiful chrome finish, bevelededges and an array of LED’s will reallyadd a touch of class. Measuring 1” x 6-7/8” for use on a variety ofmakes and models. Installs with ease!

Radiator Top Trim


Fits all Valkyrie models (except Rune).

You’d best keep your shades handy,‘cause once you mount this newTransmission Cover set, the shine fromyour Valkyrie will be blinding! Thesecovers put the finishing touch on theotherwise dull looking cast transmissioncase and nicely complement existingchrome engine components.

All hardware is included for an easy,classy looking installation.

Transmission Cover Set


Fits Front, all VTX 1800, 1100 Spirit(front and rear), 750 Spirit, Shadow VLX600 models. will also fit other motorcycleswith reflectors that are 3-5/16” x 1-1/4”or smaller with 1/4” of clearancearound the reflector. Small reflectorcovers


Fits Front, all Yamaha Road Star, VStar, 1100, Royal Star and Royal StarVenture models. Large reflector coversRear, All Honda VTX 1800 (excludingC) models and 1300 Retro / S models.Will also fit other motorcycles withreflectors that are 3-1/2” x 1-3/8” orsmaller with 1/4” of clearance aroundthe reflector.

Stylize those unsightly front and rearreflectors on your bike with our louvered chrome covers. Leaves themon your bike for heightened visibilitybut adds a stylized louvered cover in traditional Kuryakyn shiny chrome.

Reflector Covers


Fits V Star 1100 models from 1999 thru2006.

Turn that drab black tube under yourseat into a real eye catcher. It looks soreal that you can hardly tell it’s just acover. When added to our Boomerangframe cover, it a looks like you’vechromed the whole frame! Quick andsimple to install.

Mid-Frame Covers


Fits V Star 650 models


Fits V Star 1100 models

This dazzling chrome accent will reallymake your bike stand out from the rest.Easily installed, these show-chromed,die-cast frame covers make artworkout of a part of your bike that wouldotherwise fade into the background.The kit for the V Star 1100 includes apair of upper frame covers that smooththe transition from the BoomerangFrame Cover to the fender. These really“pop” when combined with our new“Phantom” axle / hub coversPT#161004

Boomerang Frame Covers

6

Kuryakyn Products

161008 SOLD AS SET

Fits VTX 1800 models.

161009 SOLD AS SET


Transform that rough black frame forging into a sleek, stylish, attentiongetter. this two-piece kit attaches with high-strength, high temp adhesive for aquick and easy install.

Frame Trim


Fits all Honda VTX 1800 (excluding N),all VTX 1300, Shadow 1100 Sabre andSpirit, 750 Ace, Aero - Spirit, VLX 600models. will also fit other models with3-1/8” dia rear shocks that have 3/4”between the top of the shock coverand the center of the top mount hole.

Chrome shocks with a dull chrome topmount, not good. Now finish thechrome all the way to the top with ourRear Shock Top Cover and notice thedifference. With Kuryakyn style BloodGrooves, these covers finish the shocktop out right.

Rear Shock Top Cover

150022 SOLD EACH

Fits V Star 1100 models from 1999 thru2006 and V Star 650 models from 1998thru 2006.

Give the rear differential the effect of achromed housing at a fraction of thecost. Our new shaft drive cover integrates nicely with the design of ourPhantom Covers for the V Star. Easyadd-on with a two-bolt installation.

Shaft Drive Cover


Fits all Road Star models (excludingWarrior).

Add the finishing touches to the tailend of your swingarm and smooth outthose lines. These little beauties coverup the axle, adjustment bolts, andrough casting in one easy step.

Phantom Covers


Fits V Star 650 models from 1998 thru2005 and V Star 1100 models from1993 thru 2005. On 2006 V Star 650and 1100 models left side installs fine.Right side requires an aftermarketexhaust that allows 3/4” clearance fromexhaust mount bracket and exhaust.

These awesome rear axle/hub coverswork wonders on the back wheels of VStar 1100s and 650s alike. They turn ahodge-podge of fasteners, frametubes, axles, hubs etc. into onesmooth-sculpted chrome cover. The kitalso includes covers to hide the boltheads that secure the drive housing tothe swing arm. Combine these with ournew Boomerang Frame Covers andyou’ll have one seriously hot lookingscooter on your hands!

Note : When checking for appropriateclearance on ‘06 models pleaseremember swingarms move separatefrom your exhaust mounts. Compressand uncompress suspension for properclearance.

Phantom Covers

150006 SOLD EACH

Fits VTX 1800 Retro, S or N modelsfrom 2002 thru 2006.

On a finely finished bike like the VTXyou don’t want an ugly weld showingon an otherwise decent shift lever. In aheartbeat you can cure this with ourcreamy smooth chrome cover.

Shifter Pivot Cover

Kuryakyn Products

7


Fits VTX 1300 and VTX 1800 models.

For those with Stiletto ISO-Grip EndCaps, here’s an opportunity to make astronger statement. Stiletto Axle NutCaps fit up closely to the sliders withno unsightly gaps.

Stiletto Axle Nut Caps



Bring some flash to the spun aluminumhubs on your VTX 1300. Our chromeplated die cast, directional hub coversfit perfectly, giving you the benefit ofcustom wheels without the expense.Installation is quite simple, but doesrequire removing the front wheel (notcompatible with cast wheels).

Hub Covers


Fits Vulcan 1500 models from 1995 thru2004.

It’s amazing what a difference adding asmall detail like this will do for a frontend. In minimal time, rusted, corroded,or chewed up axle ends and hardwareare replaced with a pristine chrome finish!

Axle Caps

123001 SOLD EACH

Fits Valkyrie (excluding Rune) modelsfrom 1997 thru 2004.

This beautifully chromed delta-shapedcover neatly hides the front tank taband neck top. Stainless steel mountinghardware is included to complete thiseasy installation.

Neck Cover

120001 SOLD EACH

Fits 1100 Sabre models.

Simple yet effective, tasteful not gaudy,our new Tank Tab Cover conceals thefront tank mounting tab and tidies upthe area behind the top triple tree.

Tank Tab Cover

123002 SOLD AS SET

Fits all V Star 1100 models from 1999thru 2006.

Kuryakyn’s chrome neck cover for theV Star 1100 is a stunning replacementfor the dull, stock, black components.The cover is not simply a chrome replicaof the stock parts. The contours onboth sides have been smoothed andmolded to provide a flowing appearance.The right side cover has a stylizedteardrop shaped boss that surroundsthe ignition switch and leaves just itsouter surface exposed. installation ofthis chrome plated two-part compositepiece is a simple affair and can beaccomplished with common handtools.

Neck Cover

8

Kuryakyn Products

161001 SOLD EACH

Fits V Star models.

Here’s a little flash of chrome for V Starspeedo cables. Just slip into place andtighten the set screw - it’s that easy!

Speedo Cable Ferrule Cover

143006 SOLD EACH

Fits most Cruisers with banjo fittingsrequiring a 12mm wrench.

This trick little cover “erases” nastylooking zinc or cad plated brake line fittings that are very prone to corrosion.They also add finishing detail to mastercylinders and calipers.

Banjo Bolt Cover

163002 SOLD AS SET

Fits VTX 1300 R/S models from 2003thru 2006 and VTX 1300 C models from2004 thru 2006.

A 3-piece set that includes a one-piececover for the top triple clamp and apair of die cast fork tube caps.

These are the ultimate front end dress-upkits for the VTX. They provide the lookof a custom chrome replacement tripletree set, at a fraction of the cost, andwith significantly less work!

Note : Requires removal of handlebarriser assembly and headlight mountduring installation.

Triple Tree Cover Sets

163001 SOLD AS SET

Fits VTX 1800 C/F models from 2002thru 2006.

A 5-piece set that includes a one-piececover for the top triple clamp, chromefork tube caps, and covers for thelower triple clamp.

These are the ultimate front end dress-upkits for the VTX. They provide the lookof a custom chrome replacement tripletree set, at a fraction of the cost, andwith significantly less work!

Note : Requires removal of handlebarriser assembly and headlight mountduring installation.

Triple Tree Cover Sets161002 SOLD EACH


Add some shine and fill the voidbetween the gas tank and your seatwith this stylish chrome accent. Withquick installation, keep the lines of yourbike flowing and cover up those crudewelds on the back of your tank.

Rear Tank Trim

Kuryakyn Products

9


Fits 7/8” handlebars.


Fits 1” handlebars.

Just about any popular cruiser can be fitted with theincredibly comfortable kuryakyn ISO-Grips. These grips fit7/8” or 1” bars and re-use the stock throttle sleeve. Aneasily cut spacer is included to accommodate bars of differing lengths. Super hi-strength adhesive and easy stepby step installation instructions are included.

Universal ISO-Grips

Honda Models


Fits all Valkyrie models.


Fits :Shadow Aero 1100 models from 1998 thru 2003. Shadow Sabre 1100 models from 2000 thru 2006. Shadow Spirit 1100 models from 1997 thru 2006. Shadow Ace Tourer 1100 models from 1998 thru 2003.Shadow Ace 750 Deluxe models from 1998 thru 2003.VLX Deluxe models from 1988 thru 2006. VLX models from 1988 thru 2006. Magna models from 1994 thru 2004.


Fits :Shadow Ace 750 models from 1998 thru 2003.Shadow 750 Aero models from 2004 thru 2006.Shadow Spirit 750 models from 2000 thru 2006. All VTX 1300 models from 2003 thru 2006.All VTX 1800 models from 2002 thru 2006. Rune models from 2004 thru 2005.

Yamaha Models


Fits :Road Star (excluding Warrior) models from 1999 thru 2006.Road Star Silverado models from 1999 thru 2006. Road Star MM LTD models from 1999 thru 2006. V Star 1100 Classic models from 1999 thru 2006. V Star 1100 Custom models from 1999 thru 2006. V Star 650 Classic models from 1998 thru 2006. V Star 650 Custom models from 1998 thru 2006.

Kawasaki Models


Fits :Vulcan models from 2004 thru 2006. Classic 1600 models from 2003 thru 2006. All Drifter 1500 models.All Nomad 1500 fi models. All Nomad 1500 models.All Classic 1500 fi models. All Classic 1500 models.All 1500 A models.All Mean Streak models.All Drifter 800 models.Classic 800 models from 1996 thru 2005.Vulcan 800 models from 1995 thru 2005.

Suzuki Models


Fits :Intruder LC 1500 / Boulvard C90 models from 1998 thru 2006. Volusia 800 / Boulvard C50 models from 2001 thru 2006. Marauder 800 / Boulvard M50 models from 2001 thru 2006.


Fits :Intruder 800 / Boulvard S50 models from 1995 thru 2006. Intruder 1400 / Boulvard S83 models from 1995 thru 2006.

Combining great style and comfort, these grips measure 5-3/4” longand provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO-pads permit air movementfor added comfort in hot weather. The knurled Accent Ring adds atouch of class.

ISO-Grips

Note : These grips are not compatible with “bar-end”weights found on many bikes. The majority of the time,removing these weights is a simple affair and the vibrationabsorbing quality of our ISO-Grips more than compensatesfor the vibration damping lost by removal of the “bar-end”weight. Sometimes, the “bar-end” weight is incorporated intothe design of the stock grips and actually supports the end ofthe grip. Please make sure removing “bar-end” weights orstock grips will not affect the installation of the ISO-Grips.

10

Kuryakyn Products

Honda Models


Fits :Shadow Aero 1100 models from 1998 thru 2003. Shadow Sabre 1100 models from 2000 thru 2006. Shadow Spirit 1100 models from 1997 thru 2006. Shadow Ace Tourer 1100 models from 1998 thru 2003.Shadow Ace 750 Deluxe models from 1998 thru 2003.Shadow Ace 750 models from 1998 thru 2003.Shadow 750 Aero models from 2004 thru 2006.Shadow Spirit 750 models from 2000 thru 2006. VLX Deluxe models from 1988 thru 2006. VLX models from 1988 thru 2006. Magna models from 1994 thru 2004.All VTX 1300 models from 2003 thru 2006.All VTX 1800 models from 2002 thru 2006. Rune models from 2004 thru 2005.

Yamaha Models


Fits :Road Star (excluding Warrior) models from 1999 thru 2006.Road Star Silverado models from 1999 thru 2006. Road Star MM LTD models from 1999 thru 2006. V Star 1100 Classic models from 1999 thru 2006. V Star 1100 Custom models from 1999 thru 2006. V Star 650 Classic models from 1998 thru 2006. V Star 650 Custom models from 1998 thru 2006.

Kawasaki Models


Fits :Vulcan 2000 models from 2004 thru 2006. Classic 1600 models from 2003 thru 2006. All Drifter 1500 models.All Nomad 1500 fi models. All Nomad 1500 models.All Classic 1500 fi models. All Classic 1500 models.All 1500 A models.All Mean Streak models.All Drifter 800 models.Classic 800 models from 1996 thru 2005.Vulcan 800 models from 1995 thru 2005.

Suzuki Models


Fits :Intruder LC 1500 / Boulvard C90 models from 1998 thru 2006. Intruder 1400 / Boulvard S83 models from 1995 thru 2006.Intruder 800 / Boulvard S50 models from 1995 thru 2006. Volusia 800 / Boulvard C50 models from 2001 thru 2006. Marauder 800 / Boulvard M50 models from 2001 thru 2006.

Our new ISO-Flame Grips have a unique flamed pattern in thesoft and cushy rubber pads. Finished off with a Maltese Crossemblazoned end cap and trim ring for that additional bad attitude look. This grip accepts our wildly popular ISO-Throttleboss, which greatly aids your hand on those long rides to thenext rally.

ISO-Flame Grips

Note : These grips are not compatible with “bar-end”weights found on many bikes. The majority of the time,removing these weights is a simple affair and the vibrationabsorbing quality of our ISO-Grips more than compensatesfor the vibration damping lost by removal of the “bar-end”weight. Sometimes, the “bar-end” weight is incorporated intothe design of the stock grips and actually supports the end ofthe grip. Please make sure removing “bar-end” weights orstock grips will not affect the installation of the ISO-Grips.


Fits 7/8” handlebars.


Fits 1” handlebars.

Just about any popular motorcycle canbe fitted with the new universal ISO-Flame Grips. These grips fit 7/8” or1” bars and re-use the stock throttlesleeve. Super hi-strength adhesive andeasy step by step installation instructionsare included.

Universal ISO-Flame Grips

Kuryakyn Products

11


Fits Kuryakyn ISO-Grips.

Simply replaces existing end cap onKuryakyn ISO-Grips. Installation is abreeze. Screws supplied for use with orwithout ISO-Throttle Boss.

Stiletto End-Caps

164010 SOLD EACH

Fits Kuryakyn ISO-Grips Throttle Boss.


Fits Kuryakyn ISO-Grips Left and Right matching Bosses.

Added to the popular Kuryakyn ISO-Grips, this little jewel can make all thedifference in the world on a long ride.The Throttle Boss is a small adjustablepaddle that is positioned under thepalm of one’s throttle hand. This allowsthe rider to slightly relax the grip on thegas and still maintain a constantspeed. Muscle stiffness and fatigue arereduced after prolonged cruising at asteady pace. A new redesigned rubberpad permits use on both grips for a“matched set”.

ISO-Throttle Boss

164011 SOLD EACH

Fits any application with twist gripthrottle.

Regardless of what type of bike youride, the Throttle Boss will make ridingany distance more comfortable.Designed to fit any type or size grip,the Throttle Boss can be installed inseconds to provide a cushioned platform for your palm. This allows therider to vary or maintain a speed without keeping a tight grip on thethrottle, reducing muscle fatigue anddiscomfort. Removes quickly withouttools to stow in a jacket pocket, toolbag, etc.

Universal Throttle Boss

165011 SOLD AS SET

Fits all VTX 1800 models from 2002thru 2006.

Designed specifically for the VTX 1800,this set includes covers for both thehandlebar brake and clutch mastercylinders. These covers fit over thestock lids making installation quick,easy, and neat.

Deluxe Master CylinderCover Set

165003 SOLD EACH

Fits :All Road Star models from 1999 thru 2006.All V Star 650 models from 1998 thru 2006.All V Star 1100 models from 1999 thru 2006.

165012 SOLD EACH

Fits :All VTX 1300 models from 2002 thru2006.All Shadow 750 models from 2004 thru2006.

A great addition to the rest of our products to cover your hand controls.Detail is often the difference betweengood and great. Our new perch coversfit in that category! installation is quickand easy.

Clutch Perch Cover

12

Kuryakyn Products

165001 SOLD EACH

Fits :V Star 650 models from 1998 thru 2006V Star 1100 models from 1999 thru 2006.

165002 SOLD EACH

Fits all Road Star models from 1999 thru 2006.

165010 SOLD EACH

Fits :all VTX 1300 models from 2003 thru 2006.all VTX 1800 (right side only) models from 2002 thru 2006.Shadow 1100 models from 1999 thru 2006.Shadow 750 Ace models from 1999 thru 2006.Shadow 750 Aero models from 1999 thru 2006.Shadow 750 Spirit models from 1999 thru 2006.VLX 600 Deluxe models from 1999 thru 2006.VLX 600 models from 2000 thru 2006.Valkyrie models from 2000 thru 2003.

As cool as the new crusiers are, the handlebar controlsleave a lot to be desired in the looks department. Our newhandlebar brake master cylinder cover cures the problem inshort order. Installation is quick and neat right over the tocklid. It’s easy and it’s cool !

Master Cylinder Covers

Honda Models

165008 SOLD AS SET

Fits VTX 1800 models from 2002 thru 2006.

165009 SOLD AS SET

Fits VTX 1800 models from 2002 thru 2006.All VTX 1300 models from 2002 thru 2006. All VLX 600 models from 2002 thru 2006.All Spirit 750 models from 2002 thru 2006. Shadow Aero 750 models from 2004 thru 2006.All other late model Hondas without choke on left handlebar control.

Handlebar Control CoversCover up unsightly housings and create a smooth, full-customlook with these clamshell-design chrome covers. They installeasily and encapsulate the stock housing without interferingwith control functions. They’re an awesome accent to ISO-Grips and our custom mirrors. Offered for many applications with more on the way.

Yamaha Models

165004 SOLD AS SET

Fits :All Road Star (excluding Warrior) models.All V Star 650 Custom models.

165005 SOLD AS SET

Fits All V Star 1100 Custom models.

165006 SOLD AS SET

Fits All V Star 1100 Classic and Silverado models.

165007 SOLD AS SET

Fits All V Star 650 Classic and Silverado models.Kawasaki Models

165004 SOLD AS SET

Fits Vulcan 2000 and Mean Streak models.

165007 SOLD AS SET

Fits Vulcan 1500 and 1600 models.

Suzuki Models

165004 SOLD AS SET

Fits Marauder 1600 / Boulvard M95 models.

Kuryakyn Products

13

166003 SOLD EACH

Fits Metric custom applications.Small head Flat Glass Magnum Plusmirror 5” x 2-5/8” with Magnum Plusheight stem 4-3/8”.

166004 SOLD EACH

Fits Metric custom applications.Large head Flat Glass Magnum Plusmirror 5-1/2” x 3” with Magnum Plusheight stem 4-3/8”.

Beautifully chrome plated MagnumPlus Mirrors feature the same beefedconstruction as our standard Magnummirrors but have a different stem thatmoves the mirror head outward 2” farther than our Magnum Mirror.

Note : Mirror adapters PT# 166001 or166002 required for installation onMetric Cruisers.

Magnum Plus Mirrors


Fits Honda, Suzuki and Kawasaki models.


Fits Yamaha models.

These adapters make it possible to useKuryakyn custom mirrors, on MetricCruisers. Locknuts allow the mirror tobe positioned for maximum effectiveness.Order a pair of adapters along with apair of the mirrors that suit your style.

Mirror Adapters


Fits Metric custom applications.Flat Glass Turn Signal mirrors 5” x 2-3/4”with 4-3/8” height stem.

This Kuryakyn original looks goodcoming and going. From the rider’sseat, these custom mirrors are functional, and great looking, with aheavy duty locking mechanism andswivel ball to keep the mirrors adjustedwhere you want them. Looking at themirrors from the front, you’ll notice abank of LED’s that work as a runninglight and a super bright auxiliary turnsignal. Unlike other lighted mirrors,these lights only face forward so glareis not a factor. The life of this lightsource will be several times that ofincandescent bulbs.

Mirror adapters PT# 166001 or 166002required for installation on MetricCruisers.

Note : These Turn Signal Mirrors weredesigned to satisfy the flash requirementsof Harley Davidson motorcycles. Thedraw produced by these lights, or loadequalizers used with LED lights may ormay not be what is needed for properflash and frequency on your MetricCruiser. You may have to experimentwith different flashers, load equalizers,etc. to achieve the desired flash onyour bike. It may be necessary toobtain these components from sourcesother than Kustomwerks.

Turn Signal Mirrors


Fits Metric custom applications.Small head Flat Glass Magnum mirrors5” x 2-5/8” with standard height stem3-15/16”.

We call it the Magnum because of itsrugged design. Every component hasbeen beefed up. Unlike other flimsymirrors, ours are made super tough.Magnum mirrors have a beautifulchrome plated finish and a style alltheir own.


Magnum Mirrors


Fits Metric custom applications.Flat Glass Ellipse mirrors 5” x 2-3/4” with4-3/8” height stem.

These state-of-the-art custom mirrorsare cut from the same mold as our turnsignal mirrors, but they do not have therunning light and turn signal functions.They feature an oversized swivel ballfor superior locking ability.


Ellipse Mirrors

14

Kuryakyn Products

143008 SOLD EACH

Fits most Metric Cruisers.Single Brake Bleeder Screw Cover.


Fits most Metric Cruisers.Pair of Brake Bleeder Screw Covers.

This little gem is the perfect complement to our Banjo Bolt Cover.Easily installed over the stock rubbercover, this piece provides a nice detailwhen dressing up brake calipers onmetric Cruisers.

Brake Bleeder Screw Cover


Fits all VTX 1800 models.

Cover those bare stamped bracketsholding your front brake lines to theforks with some blood groovedchrome. These little beauties reallymake a difference and clean up thelower front fork area.

Brake Line Accent Covers

143009 SOLD AS KIT


143010 SOLD AS KIT

Fits VTX 1800 Retro/S models from2003 thru 2006.

These Dress-up Kits for the VTX andVTX Retro make artwork out of partsthat are otherwise pretty dull. All components are simple to install andinclude all necessary hardware. All kitsinclude a replacement fluid reservoircap and a wrap around reservoir cover.The kit for the VTX 1800 C/F alsoplaces a streamlined cover on the master cylinder. All components featurea dazzling chrome finish.

Brake Component Dress-up kit


Fits all VTX 1800 models from 2003thru 2006 (except early 2003 modelswith caliper bleeder screw betweenbrake line fittings).

Perk up that front end by adding thesesuper easy to install show chromecaliper covers. You’ll get a lot of compliments on these.

Front Caliper Covers

143005 SOLD EACH


Finish off that rear brake with our purecustom looking caliper cover. Youwon’t believe the difference.

Rear Caliper Covers

143002 SOLD EACH

Fits :Yamaha V Star 1100 and Royal StarVenture models.

Kawasaki Vulcan 1500 models.

Suzuki Volusia / Boulevard C50 models.

This Wicked looking Caliper Coverinstalls in minutes, no tools required.

Front Caliper Cover

143001 SOLD EACH

Fits Suzuki M109R models thru 2006.

Very Cool, very easy, very affordable .Be the first to finish off that rear brakewith our pure custom looking calipercover. You’ll be glad you did.

Rear Caliper Covers


Fits Valkyrie models (excluding Rune)from 1997 thru 2004.

In only minutes, you can make art outof an otherwise drab looking caliper.These covers install easily with no toolsor fastener. Add our bleeder fittingcover and banjo bolt cover with theseand you’ll be looking smart!

Caliper Covers

Kuryakyn Products

15


Fits VTX 1300 models with factory floorboards (Retro, etc.) from 2003 thru 2006VTX 1800 models with factory floorboards(Retro, etc.) from 2003 thru 2006

Simple to install with a huge impact.These Floorboard covers really makethe difference to your foot rest area.

Floorboard Covers forHonda


Fits VN 1600 Classic models from 2003thru 2006 and VN 2000 models from 2003thru 2006.


Floorboard Covers forKawasaki


Fits all Floorboard model Vulcan 800and 1500 models including Classic,Nomad and Drifter models.


Floorboard Covers forKawasaki


Fits custom applications.ISO-Boards with Brackets.

This system allows replacement of stock front footpegs withour ISO-Boards on popular metric cruisers. This kit includesour finely chromed ISO-Boards, with cushy, full length ISOrubber inserts for great looks and unbeatable comfort anda cast bracket to connect the ISO-Board to the slip resistantsplined adapter. Freshly designed for front applications,this system requires the use of our make / model specificsplined adapters found on page 89 (sold separately)

Note : Placing these footboards on mounts intended forfootpegs may prohibit them from folding up in the samemanner as the stock peg. While the board may be rotatedon the mount for a comfortable foot position, some anglesmay cause the board to contact other components on thebike before the board is folded up completely. Also, if theboard is positioned so it will fold up as stock, the trailingend of the board may be in a position that could limit cornering clearance. Before ordering, be aware of componentson the bike that may interfere with the placement of thefootboards.

ISO Floorboards


Fits custom applications.ISO-Boards and Mounting Kit.

This system allows the mounting of our ISO-Boards to passenger mounts on popular metric cruisers. This kitincludes our finely chromed ISO-Boards, with cushy, full lengthISO rubber inserts for great looks and unbeatable comfortand a cast bracket to connect the ISO-Board to the footpegadapter. Requires the use of our make / model specific footpeg adapters found on page 89 (sold separately) not recommended for use in front (driver) applications.

Note : Placing these footboards on mounts intended for footpegs may prohibit them from folding up in the same manneras the stock peg. While the board may be rotated on themount for a comfortable foot position, some angles maycause the board to contact other components on the bikebefore the board is folded up completely. Also, if the board ispositioned so it will fold up as stock, the trailing end of theboard may be in a position that could limit cornering clearance.Before ordering, be aware of components on the bike thatmay interfere with the placement of the footboards.

Passenger Floorboards

16

Kuryakyn Products


Fits V Star 1100 and Road Star 1600 /1700 models from 1999 thru 2006.

Dress up those drab stock rider (driver)boards with these finely chromed covers.Rubber inserts add comfort and giveyour boots a better grip. to install, justpeel off the stock rubber layer, pop thecover into place, and screw the coveronto the stock board from the bottom.

Floorboard Covers forYamaha


Fits Roadliner and Stratoliner models.

Dress up those drab stock rider (driver)boards with these finely chromed covers.Rubber inserts add comfort and giveyour boots a better grip. to install, justpeel off the stock rubber layer, pop thecover into place, and screw the coveronto the stock board from the bottom.

Floorboard Covers forYamaha


Fits custom applications.

These Longhorn offset dually ISO-pegswith 1-1/4” clamps are the all-in-oneanswer for long-haul comfort. We combined our most popular highwaypeg components into one productthat’s attractive, adjustable and easy toinstall.

Longhorn Offset DuallyHighway Pegs


Fits custom applications.

This is our most popular style of highwaypegs. Using our patented MagnumQuick Clamp, they are a snap to installand provide long-haul comfort. Theycan be installed on any 1-1/4” diameterround tubing (frames or engine guards),but it is important to keep in mind thatthe footpeg itself will end up perpendicular to the bar to which it ismounted.

Dually ISO-Pegs with Clevisand Magnum Clamps


ISO Wing male mount footpegs forcustom applications.

These pegs are compatible with allKuryakyn cruise peg mounts and canalso be used to “build-your-own” highway pegs by combining mountingcomponents.

Note : These pegs will NOT replace thestock peg on any metric cruiser.

ISO Wing Male MountFootpegs


Dually ISO male mount footpegs forcustom applications.



Dually ISO Male MountFootpegs

Kuryakyn Products

17

Honda Models

144030 SOLD EACH

Fits VTX 1300 C models from 2003 thru 2006VTX 1800 models from 2002 thru 2006

Note : Will also fit most any application with round shift pegsapproximately 2-5/8” long and 9/16” in diameter.

Yamaha Models

144029 SOLD EACH

Fits Road Star Venture modelsRoad Star (heel and toe) modelsV Star 1100 Classic (toe only, heel PT#144002) modelsV Star 650 Classic (toe only, heel PT#144002) models from2001 thru 2006


Kawasaki Models

144029 SOLD EACH

Fits Vulcan 1500 modelsVulcan 1600 modelsVulcan 2000 (toe only, heel PT#144001) models


Suzuki Models

144029 SOLD EACH

Fits Intruder 1500 LC models 1998 thru 2004Boulevard C90, C50 (toe only, heel PT#144001) models from2005 thru 2006


Victory Models

144031 SOLD EACH

Fits all Victory models excluding Kingpin.

These round rubber lined chrome shift pegs will accommodate almost any round shift pegs.

Round Shift Peg Covers


Small ISO male mount footpegs 5” long x 1-3/8” wide for custom applications.


Large ISO male mount footpegs 5” long x 1-3/4” wide for custom applications.



ISO Male Mount Footpegs

144021 SOLD PACK OF 8

Fits small ISO pegs


Fits large ISO pegs


Fits ISO shift pegs

Even though our pegs are the finestavailable, after years of hard miles itmight be necessary to replace wornout pads. Available in black only.

Replacement Rubber Padsfor ISO Footpegs

18

Kuryakyn Products

144028 SOLD EACH

Fits all Vulcan 1500 and Vulcan 1600Classic models up to 2004

These hot looking chrome brake pedalcovers add a custom touch to a Vulcanin minutes. Designed to encapsulate theexisting pieces, so installation couldn’tget much easier. Rich chrome and blackrubber finish.

Brake Pedal Cover


Pilot male mount footpegs for customapplications.



Pilot Male Mount Footpegs


Longhorn ISO male mount footpegs forcustom applications.



Longhorn ISO Male MountFootpegs


Retro male mount footpegs for customapplications.



Retro Male Mount Footpegs

Honda Models

144003 SOLD EACH

Fits Shadow Aero 750 models from 2004 thru 2006

Yamaha Models

144002 SOLD EACH

Fits V Star 650 Classic (toe) models from 1998 thru 2000V Star 650 Custom (toe) models from 1998 thru 2006V Star 650 Classic (heel only, toe PT#144029) models from 2001 thru 2006V Star 1100 Classic (heel only, toe PT#144029) models from 2001 thru 2006V Star 1100 Custom (toe) models from 1999 thru 2006

Our Classy chrome and rubber “clam-shell” design shift pegcover replace the drab rubber OEM shift peg pads. Simplehassle free installation.

Note : Will also fit most any application with an oval shift pegwith a width of 5/8” or less.

Oval Shift Peg Covers

Kuryakyn Products

19

Honda Models

144001 SOLD EACH

Fits VLX 600 (brake pedal) models from 1996 thru 2006750 Magna (brake pedal) models from 1996 thru 2004750 Spirit (brake pedal) models from 2001 thru 2006750 Shadow Aero (brake pedal) models from 2004 thru 20061100 Spirit (brake pedal) models from 1996 thru 20061100 Ace (brake pedal) models from 1997 thru 19991100 Sabre (brake pedal) models from 2002 thru 2006

Yamaha Models

144001 SOLD EACH

Fits V Star 650 Classic / Custom (brake pedal) models from 1998 thru 2006 V Star 1100 Classic (brake pedal) models from 1999 thru 2006

Kawasaki Models

144001 SOLD EACH

Fits Vulcan 750 (brake pedal) models from 1986 thru 2006 Vulcan 1500 (heel shift) models from 1996 thru 2006Vulcan 1600 (heel shift) models from 2003 thru 2006All Vulcan 2000 (heel shift) models

Suzuki Models

144001 SOLD EACH

Fits Volusia 800 (brake pedal) models from 2001 thru 2004Marauder 800 (brake pedal) models from 2002 thru 2006Boulevard M50 (brake pedal) models from 2002 thru 2006Boulevard C50 (heel shift) models from 2005 thru 2006Boulevard C90 (heel shift) models from 1998 thru 2006Intruder 1500 LC (heel shift) models from 1998 thru 2006

A slick little chrome and rubber clam-shell cover replaces thestock rubber pad on brake or heel shift pedals.

Shift and Brake Pedal Pad Covers

Yamaha Models

144025 SOLD EACH

Fits Road Star 1600 / 1700 (ex. Warrior) models from 1999 thru 2006

Kawasaki Models

144025 SOLD EACH

Fits Vulcan 1500 models from 1996 thru 2006 Vulcan 1600 models from 2003 thru 2004

Suzuki Models

144025 SOLD EACH

Fits Intruder 1500 LC models from 1998 thru 2004

This is one of our most popular parts, it can be easily adaptedfor use on several cruisers. Simply drill one hole in your existing rear brake pedal.

Brake Pedal Pad



Here’s the perfect solution for addingcruise pegs to the VTX 1800 C/F. Thissetup place the pegs in a comfortable“stretched out” location, withoutadding bulky engine guards to thissleek machine. These super cleanmount plates simply bolt on to theexisting forward controls for a sturdy,comfortable setup this is also pleasingto the eye. The Cruise Peg Mount willaccept any male mount peg.

Cruise Peg Mounts

20

Kuryakyn Products


Fits 1-1/4” diameter round tubing.


Fits 1-1/2” diameter round tubing.

We’ve made a lot of friends with these !Stainless steel construction for superiorstrength and hinged design for fast simple installation. No more stripped boltheads !

Magnum Quick Clamps


Offset footpeg mounts for customapplications.


Short Magnum footpeg mount with1/2” - 13 thread.

Footpeg mountings listed perform thesame function, your decision will boildown to the style you prefer.

Footpeg Mounts


Fits VTX 1300 Retro models from 2003thru 2006 and VTX 1300 C models from2004 thru 2006.

Add cruise pegs without sullying yourVTX with bulky engine guards. Thesesuper clean mount plates simply bolton to the existing footboard or footpegmounting bosses for a sturdy, comfortable“stretched out” setup that is alsopleasing to the eye. The Cruise PegMount will accept any male mount peg.

Cruise Peg Mounts

175001 SOLD EACH

Fits V Star 650 models from 1998 thru2006 and V Star 1100 models from1999 thru 2006.

Making your presence known is abeautiful thing. But the horn itself sureisn’t. This bolt-on chrome coverensures your horn is heard but notseen.

Horn Cover

150001 SOLD EACH

Fits all Road Star 1600 / 1700 models(excluding Warrior).

150003 SOLD EACH

Fits all Road Star 1600 models.

Flow some chrome over your regulatorand add sparkle to this bland part.These traditional finned style regulatorcovers contain slots to allow ample airflow to keep your regulator cool andfunctional.

Regulator Cover

Kuryakyn Products

21

Honda Models


Fits 600 VLX models from 1996 thru 2006600 VLX Delux models from 1996 thru 2006 750 Magna models from 1996 thru 2004 750 Spirit models from 2000 thru 2006 750 Aero models from 2004 thru 2006VTX 1300 C models from 2003 thru 2006VTX 1300 R/S models from 2003 thru 2006VTX 1800 C/F models from 2002 thru 2006VTX 1800 R/S/N models from 2003 thru 2006

Splined adaptor mounts to allow replacement of stock rearfootpegs with our ISO-Boards.

Kawasaki Models


Fits Vulcan 800 Classic models from 1996 thru 2005Vulcan 800 Custom models from 1995 thru 2005Vulcan 1500 A/B models from 1987 thru 1999Vulcan 1500 / 1600 Mean Streak models from 2002 thru 2006Vulcan 2000 models from 2004 thru 2006


Yamaha Models


Fits V Star 650 models from 1998 thru 2006V Star 1100 models from 1999 thru 2006All Virago 750 and 1100 modelsRoad Star 1600 / 1700 (ex Warrior) models from 1999 thru 2006


Floorboard Rear SplinedAdaptor Mounts

Honda Models


Fits 600 VLX models from 1996 thru 2006600 VLX Delux models from 1996 thru 2006 750 Magna models from 1996 thru 2004 750 Spirit models from 2000 thru 2006 750 Aero modelsfrom 2004 thru 2006


Fits VTX 1800 C/F models from 2002 thru 2006


Fits VTX 1300 C models from 2003 thru 2006

Splined adaptor mounts to allow replacement of stockfront footpegs with our ISO-Boards.

Kawasaki Models


Fits Vulcan 800 Classic models from 1996 thru 2005Vulcan 800 Custom models from 1995 thru 2005Vulcan 1500 A/B models from 1987 thru 1999Vulcan 1500 / 1600 Mean Streak models from 2002 thru 2006


Yamaha Models


Fits V Star 650 models from 1998 thru 2006V Star 1100 models from 1999 thru 2006All Virago 750 and 1100 models


Floorboard Front SplinedAdaptor Mounts

22

Kuryakyn Products

Honda Models

119004 SOLD EACH


119003 SOLD EACH

Fits VTX 1300 and VTX 1800 all modelsfrom 2005 thru 2006, Shadow and Aero750 models from 2004 thru 2006.

Run - Turn - BrakeControllers

176006 SOLD AS KIT

Fits Metric custom applications.Bullet light mounting kit.

Designed expressly for installing ourMini Silver Bullet Lights on MetricCruiser fender struts. This kit makes iteasy ! Specialized hollow mountingstuds are 3/8”-16 on one end to threadinto the light body and M8-1.25 on theother end to install in place of a fenderstrut mounting bolt on most MetricCruisers. M8-1.25 is very common onHonda, Kawasaki, Suzuki and Yamahafender struts, but you should confirmthe suitability of this kit before ordering.

Bullet Light Mounting Kitfor Metric Cruisers

176005 SOLD AS KIT

Fits Metric custom applications.Mini LED Silver Bullet Lights withAmber lenses.

176008 SOLD AS KIT

Fits Metric custom applications.Mini LED Silver Bullet Lights with Red lenses.

Mini LED Silver Bullet Lights with eitheramber or red lenses, measure 2-1/2” x1-5/8” and can be installed just aboutanywhere, and include minimal mountinghardware. LED Silver Bullets haveCAD-designed lenses to enhance thealready bright LED output to provideexceptional, jewel-like illumination. Ifyou choose to run them on the rear ofyour bike, you simply wire the “bright”circuit from the light into your stockturn signal circuit and they will functionjust as your stock turn signals did. RedLED Silver Bullets are single circuit andare intended for rear applications asturn signals only.

Note : Amber LED Silver Bullets have three wires, low, bright andground, so they can be wired to operate as running lights and turnsignals. Check to see if amber runninglights are legal in your State first.

Red LED Silver Bullets have two wires,power and ground, and are intended tobe used only as turn signals.

Mini LED Silver BulletLights with 3/8” -16 HollowMounting Bolts



Mini Halogen Silver Bullet Lights measure 2-1/2” x 1-5/8” and can beinstalled just about anywhere. Theyinclude minimal mounting hardware,and are assembled with high shock,heavy duty single filament quartz halogen bulbs. Halogen Silver Bulletkits for the rear of the bike include redand amber lenses. There is no need touse a load Equalizer.

Note : Halogen Silver Bullets have asingle power wire and ground throughtheir mount. Do not wire Halogen SilverBullets with Red Lenses to operate asrunning lights. Excessive Heat willresult in cracked lenses.

Mini Halogen Silver BulletLights with 3/8” -16 HollowMounting Bolts

Yamaha Models

119005 SOLD EACH

Fits all 1600 Road Star models from1999 thru 2003, all Road Star 1700models from 2004 thru 2006 and all V-Star 650 and 1100 models.

These Plug and Play run - turn - brakecontrollers will change your turnsignals into running, turn, brake lightsand will light up the back of yourmotorcycle for increased visibility.These plug and play controllers connectdirectly into the stock OEM wiring harness under the seat with no need tosplice any wires. Simply finish off theinstallation with the required red turnsignal lenses, or bulbs if you have clearlenses, for the rear of your motorcycle.

Kuryakyn Products

23

176003 SOLD AS KIT

Fits 1700 Road Star models (excludingwarrior) from 2004 thru 2006.

Get ready for the compliments whenyou stream line the back fender andadd that custom top class look to yourRoad Star. Designed to flow aroundyour stock tail light this kit fullyreplaces that stock bulky turn signaland license plate bracket.

Note : Installation of this accessory maybe in violation of Federal motor vehiclesafety standard #108. Please check yourlocal laws first.

Turn Signals with LightedCurved License Plate

176004 SOLD EACH

Fits VTX 1800C models from 2002 thru2006 and VTX 1300C models from2004 thru 2006.

Two vast improvements in one ! thesleek License Plate Bracket slides overthe eye-sore version of a mount thatcomes standard on the fender, plusreplaces stock turn signals withKuryakyn’s exclusive Silver Bullets. OurCAD-designed lenses on red LED.Silver Bullets provide exceptional,jewel-like illumination. Comes with apair of slotted and visored bezels.

Note : Installation of this accessory maybe in violation of Federal motor vehiclesafety standard #108. Please check yourlocal laws first.

License Plate Bracket

176001 SOLD EACH


This slick little curved license plateframe puts the finishing touches on ourTombstone Tail Lights. It accepts 4” x7” plates and fastens neatly to theexisting holes on the base plate. Thetwo-piece design encapsulates theplate and looks awesome from anyangle.

Curved License PlateFrame

176002 SOLD EACH

Fits VTX 1300 Retro/S models from2003 thru 2006 and VTX 1800 Retro/Smodels from 2002 thru 2006.

The rear fenders on today’s cruisersare very impressive. The license platebracket and reflectors are a differentstory. Our new streamlined licenseframe holds a 4” x 7” plate and is trulythe final touch needed. Such a difference for so little money.

Laydown License PlateMount

Fender Mount License Plate Holderwith Maltese Cross LED Tail Light

76136 SOLD EACH

Machined from billet aluminum and then nicely chrome plated.These horizontal fender mount license plate holders have asmooth finish and feature a Maltese Cross LED tail light.They mount to the fender using a supplied rubber block.

76137 SOLD EACH

Machined from billet aluminum and then nicely chrome plated.These horizontal fender mount license plate holders have asmooth finish and feature a Maltese Cross LED tail light.They mount to the fender using a supplied block mount.

Note : Fender mount license plate holders are supplied witheither a rubber block mount or aluminum block mountdepending on part number ordered.

Note : Not Dot Approved.

24

Kuryakyn Products

119002 SOLD EACH

Chrome plated LED Battery Gauge

119001 SOLD EACH

Black LED Battery Gauge

Unfortunately, most riders find out that their charging system has failed when theyend up broken down on the side of the road. A little advance warning can keepyou from being stranded in the middle of nowhere. Now you’ll know at a glancewhether or not your charging system is working properly.

Our LED Battery Gauge is an array of LEDs indicating the operating voltage of thebikes electrical system. Green LEDs represent the normal operating range of yourcharging system, 12.5v to 14.5v. Amber LEDs warn the rider that the bike is notcharging. If the reading drops below 10v or exceeds 15v, a flashing red LED willalert the rider of an impending stall or the possibility of damage to the batteryand/or sensitive electronic components on the motorcycle.

Simple two wire connection and a compact size (about 2” x 3/4” x 3/16”) makeinstallation a breeze. A daylight sensor automatically adjusts the brightness of theLEDs. They are bright during the day for visibility and dim at night so as not toblind the rider.

LED Battery Gauge

176009 SOLD EACH


Traditional style melded with moderntechnology. Our all new Tombstone Tail Light features a finely chromedhousing and rich, red lens. Hi-intensityLED’s make sure you get noticed.

Note : Tail Light only, does not incorporatea turn signal mounting bar / base plate.Mounting and wiring holes must bedrilled for installation.

Universal LED TombstoneTail Light

Kuryakyn Products

25


Fits GL 1800 models from 2001 thru2006.

These high quality Rotor Covers feature a flawless, smooth showchrome finish. Their durable compositeconstruction is lightweight and cannever rust. Exclusively Kuryakyn, ourcovers feature rounded edges on allopenings, gussets where needed forstrength and a new streamlined lookthat make our covers a cut above therest. By themselves, or with ourfamous LED Ring of Fire, these willgive your Wing a glimmering, classyappearance.

Chrome Rotor Covers

142000 SOLD EACH

Fits GL 1800 models from 2001 thru2006. Chrome Rotor Cover with AmberRing of Fire.

142001 SOLD EACH

Fits GL 1800 models from 2001 thru2006. Chrome Rotor Cover with Amberand Blue Ring of Fire.

142002 SOLD EACH

Fits GL 1800 models from 2001 thru2006. Chrome Rotor Cover withAmber, Blue and Green Ring of Fire.

142003 SOLD EACH

Fits GL 1800 models from 2001 thru2006. Chrome Rotor Cover withAmber, Red and Blue Ring of Fire.

Here’s an accessory no GL1800 shouldbe without. Chrome Rotor Covers withour LED Ring of Fire. These high qualityRotor Covers feature a flawless,smooth show chrome finish. Theirdurable composite construction islightweight and can never rust.Exclusively Kuryakyn, our covers feature rounded edges on all openings,gussets where needed for strength anda new streamlined look. With our Ringof Fire, there are two separate rows ofLED lights. On all versions, a row ofamber LEDs shine out, away from thebike through each window in thechrome ring. A second row of LEDsshine in, toward the wheel, illuminatingit with a brilliantly vibrant glow. Thissecondary row is offered in severalcolor options to complement mostpaint schemes. Improved design features encapsulated circuit boardsthat withstand exposure to the elements.

Chrome Rotor Covers withLED Ring of Fire

176018 SOLD PAIRS

Fits GL 1800 models from 2001 thru2006. Chrome Rotor Cover with AmberRing of Fire.

We see your love for the Flow from thefront wheel Ring of Fire; now light therest of your Gold Wing with the newRear Wheel Ring of Fire. With all themounting hardware you will need,these beauties cast that same glow outfront under your saddlebags.

Rear Wheel Ring of Fire

160004 SOLD AS SET


No need to spend a ton on chromingyour wheel. These easy to installchrome accents make a huge statement. Lots of flash especially ifyou have our “Ring of Fire”. Very lightweight and even distribution so re-balance is not necessary.

Chrome Wheel Spoke Cover

26

Kuryakyn Products



“Chrome Eyebrows” close thatunsightly gap between your headlampsand fairing. This beautifully radiusedchrome strip melds the fairing components together perfectly. Withsimple installation, add that classytouch to the front fairing of your GoldWing.

Chrome Eyebrows

124001 SOLD EACH


Wow! Does this easily installed chromefairing scoop trim add class or what?

Fairing Scoop Trim



Designed to blend with the smoothlines of the GL1800 front fender, thissleek chrome molding encases a slimlens, housing a bright series of LEDs.Stunning good looks and additionalvisibility will make this a popular addition to any GL1800.

LED Front Fender Accent



Fill in the gaping holes on your frontfender with the stylish Shark ToothFender Accents. These little beautiesadd that finishing touch to the emptyholes on the front fender.

Shark Tooth Fender Accents

122000 SOLD EACH


Combine this beauty and protectionwith our PT#176015 LED side strips orjust add it by itself. With a few secondsfor simple installation, it really perks upthat front fender.

Front Fender Tip



Make your mile munching Gold Winglook like the asphalt eating predator itis with our Shark Gill Fairing Accents.Shark Gills are racy, one-piece, chromeplated accents incorporating a streamlined main beam with six stylishvanes. Instantly gives the fairing exitvent an aggressive, high speed appearance. They are held in placewith a high-tech adhesive and installationrequires no drilling or disassembly ofthe motorcycle; it only takes a few minutes.

Shark Gills



Transform the plain-Jane “black hole”fairing air intake vents with stylishchrome inserts. It couldn’t be easier -just clean the inlet surface, peel andstick !

Fairing Intake Vent Inserts

Kuryakyn Products

27

176023 SOLD SET OF 4


With this set of Chrome Valve Covers,you can create a sleek, uniform lookwithout compromising the integrity ofthe stock valve covers and risking leakage or less than perfect fitment.Our chrome covers are held on by atwo sided adhesive pad designedspecifically for high temperatures theyfit snugly right on top of the stock valvecovers, so they look exactly likereplacement chrome covers, but without the expense or the potentialheadaches.

Lightning Valve Covers

150026 SOLD AS SET


If your eyes hurt from looking at theugly aluminum cam chain cover, butyou don’t want the expense and hassleof having the cover chromed, you’re inluck. Our new chrome Timing ChainCover Set for GL1800 covers the entiretiming chain cover in minutes. Justpeel and stick! The strong adhesive isspecially designed for high temperatures. A chrome version of thestock screw-in cap is included.

Chrome Timing Chain Cover Set



We’ve made our enormously popularframe covers even better. We’ve addedcarefully designed and perfectly placedrubber scuff protectors in the crucialareas. Very stylish as well.

Boomerang Frame Covers

28

Kuryakyn Products



This attractive flash of chrome nicelycontrasts the matte aluminum finish ofthe GL1800 perimeter frame. Easy-on,easy-off for service.

Pivot Cover

143012 SOLD EACH

Fits all GL 1500 and Valkyrie (ex. Rune)models.

The ISO brake pedal pad covers theraw, unfinished end of your brakepedal. Beautiful chrome with rubberinserts provide a non slip surface.

ISO Brake Pedal Pad


Fits all GL 1500 and Valkyrie (ex. Rune)models.

Direct replacement for the stock riderpegs.

Dually ISO Pegs


Fits all GL 1800 models.

The first of the GL1800’s had barely hitthe streeet when riders began askingus for footpegs for them. Now availableas a direct replacement, these classylooking, comfortable pegs can beinstalled in minutes.

Dually ISO Pegs

144042 SOLD AS KIT


Put your feet in a more comfortableposition, update foot controls, andimprove the look of your bike, all at onetime. Our new Driver Floorboard kitincludes a built-in heel-toe shifter and abrake lever for the ultimate in comfortand convenience. The latest addition toKuryakyn’s exclusive ISO family, ourfinely chromed driver boards havecushy, full length ISO rubber inserts toabsorb vibration. The boards fold upfor easy maneuvering in tight spacesand to allow access to the stock kickstand. The kit installs in minutes.

Driver Floorboard Kit


Fits GL 1500 SE models from 1990 thru2000.



Kuryakyn Transformer Floorboardsblend style, function and comfort. Adirect replacement for the stock passenger floorboards, the TransformerBoards bolt up in minutes. Even whennot in use, these finely chromed boardsare a great improvement over the dullaluminum stock units. When foldeddown, they offer a secure, comfortableperch for passengers. The stock heightadjustability is still fully functional onGL 1500 SE models.

The most important and unique featureof this system is the hidden retractablepassenger cruise pegs. A folding armand footrest deploys to provide analternate foot position 4-1/2” higherand 5-1/2” farther forward than thestock foot position.

Transformer Floorboard

Kuryakyn Products

29

144043 SOLD AS SET


Ergo II Cruise Mounts are undeniablythe best highway peg available for theGL1800. The sturdy two piece clampassembly is easily installed and locatesthe swingarm mounting point high andtight for excellent cornering clearance.Providing a wide range of adjustability,the Ergo II is sure to please.

Note : Kuryakyn Highway Pegs offer awide range of adjustment. It is thereponsibility of the installer or the enduser to ensure they do not interferewith the operation or cornering clearance of the motorcycle.

Ergo II Cruise Mounts

Range of Motion


Replacement short Ergo II arm 4-1/2”long.


Replacement long Ergo II arm 6” long.

Replacement arms are offered both toreplace crash or tip over damage andto help tailor the footpeg placement fortaller or shorter riders. All Ergo andErgo II Cruise Pegs come standardwith 6” arms.

Replacement Ergo II CruiseMount Arms


Fits GL 1500 models from 1998 thru2000 and all Valkyrie (ex. Interstate)models.

The Ergo arms with Dually ISO pegsare Ergonomically designed for maximum driver comfort, these mountsmake possible an unbelievable rangeof adjustment for the tall, short or inbetween rider. The articulated mountingbracket is made of highly polishedstainless steel for extreme strength,great looks and simple installation.

The 6” long chrome swing arm has aningenious locking mechanism and iscanted at a 6 degree angle whichangles the pegs just the right amountfor ideal comfort.

Ergo Cruise Pegs

164015 SOLD AS SET


With 5 different position options, adjustyour handlebars to make your GoldWing the most comfortable rider. Withall the parts you need we don’t knowanyone who offers this many optionsand convenience in one set.

Handlebar Risers


Fits Gold Wing models from 1975 thru2006.

Combining style and comfort,Kuryakyn ISO Grips are a quantumleap forward in handgrip design. Likethe popular ISO pegs, these grips provide a soft, non slip surface thatdampens operating vibration.Recessed areas between the ISO padspermit air flow for added comfort in hotweather. The knurled accent ring addsa classy detail.

Note : These grips do not support theheated grip option on many late modelbikes. They also are not compatiblewith “bar-end” weights found on manybikes. The majority of the time, removingthese weights is a simple affair and thevibration absorbing quality of our ISOgrips more than compensates for thevibration damping lost by removal ofthe bar-end weight.

ISO Grips





Our own exclusive design featuresreamed brass bushings. These arewider and more comfortable chromelevers, very popular among riders withsmall hands.

Chrome Widestyle Lever Sets

30

Kuryakyn Products



Pure class best describes this beautifullighted chrome trunk molding. Styled tobe a perfect match for our lighted saddlebag molding, they look incrediblein a complete set. Two circuit LEDsfunction as both running and brakelights for a highly visible, long lastinglight source that places a minimal drawon the electrical system. these greatlooking moldings install in a fraction ofthe time as old fashioned light bars.

LED Lighted Trunk Molding



These chromed replacement lightedmoldings add the sparkle and eleganceof the old style chromed tubular lightbars without the added weight, mountingholes, potential for rust, and maintenance. These replace existingparts on the bike so there is no addedbulk. All stock mounting points andhardware are retained. State of the artLED lights have an eye catching, brilliant quality that draws minimalpower and generates very little heat.These lighted moldings look great bythemselves, or with the other LEDaccessories that we offer for the GL1800. Any other type of light bar is nowancient history.

LED Lighted SaddlebagMolding


Fits GL 1800 models from 2001 thru2006. Trim molding without LEDs.


Fits GL 1800 models from 2001 thru2006. Trim molding with Red LEDs.

Highlight this otherwise dull drab panelwith our all new chrome or chrome &LED mini strips. These Bottom TrimMoldings replace your stock components and add the finishingtouch to the bottom of yourSaddlebags. The LED options addsthat finishing touch to completely lightup the rear molding of your bike.Works well with Lighted Trunk Moldingpart PT#176021 and LightedSaddlebag molding PT#176022.

Saddlebag Bottom TrimMolding



Add some “eye candy” to your plainJane saddlebags and added protectionto the top corner from those annoyingsurface scratches. Just stick’em onand get ready for the compliments.

Saddlebag Top Accents

176025 SOLD EACH

Fits all GL 1500 and 1800 models.

Warn drivers you’re stopping with pulsating brake lights for the back ofyour Gold Wing. With this controlleryou can activate up to 6 brake lights toflash automatically and then stay onwith a single squeeze of your brakes.The soft switching technology does notharm the life of your brake lights, soride in confidence and be seen.

Pulsating Brake LightControler

Kuryakyn Products

31

176014 SOLD EACH


It just seemed to us that the factoryforgot something between your saddlebags - it looks so empty. Ournew trim changes all that. It gives theback of your Wing a whole new personality along with added visibility.Brilliant Red LEDs light up while running and go “super bright” whenyou hit the brake. No cut and splicenecessary, just a simple plug-in forwiring.

License Area Trim withLights

122001 SOLD EACH


This handsome trim strip is a naturalcomplement to the Debris ModulatorMud Flap and our trick LightedMolding. It installs easily on the bottomedge of the rear fender and provides aclassy finishing touch.



Simply peel and stick these stylishchrome accents to the bottom edge ofyour tour trunk brake lights for that perfect sparkle. Looks great alone butcomplete the style with KuryakynSaddlebag tail light accentsPT#176018. These accessories alsocoordinate well with Kuryakyn Trunkand Saddlebag moldings or any of theKuryakyn chrome accents.

Trunk Tail Light Accents

176024 SOLD EACH

Fits GL 1800 models from 2006onwards.

These simple peel and stick chromeaccents divide the clear and red section of your GL 1800 saddlebag taillight. Looks great alone but completethe style with Kuryakyn trunk tail lightaccents PT#176020. These little beautiesalso coordinate well with KuryakynTrunk and Saddlebag moldings or anyof the Kuryakyn chrome accents.

Saddlebag Tail LightAccents

32

Kuryakyn Products



Our sleek Turndown ExhaustExtensions give your GL1800’s exhausta smooth, finished appearance.Beautiful chrome and sturdy steel construction will provide years of troublefree service. They quickly and easilyreplace the stock exhaust tips, nomodification required !

Turndown ExhaustExtensions

128003 SOLD EACH


Our receiver hitch for the GL 1800 isgood looking, strong, and very easy toinstall. This hitch features a 6 pointmounting system for superior strengthand rigidity. Installation can be performed easily with the bike on itscenter stand, and requires only a fewcommon hand tools.

Mounts simply clamp around the OEMrear saddlebag guard, providing aneasily accessible, sturdy anchor pointfor the hitch. Loosening the pipes and / or saddlebags is not necessaryfor hitch installation. When installed,the mounting framework is completelyout of sight. Only the hitch and ballassembly and front mounting pointsare visible. The rear support plate iseasily removed for quick and effortlesstire changes. We feel there is nostronger, easier to install hitch availablefrom any source, at any price.

Trailer Hitch

151000 SOLD EACH


The styling of our luggage rack for theGold Wing is as fresh as the look of theGL 1800! The billet aluminum construction has a burly look and isextremely strong. Finished in dazzlingchrome of course!

Luggage Rack



These burly Exhaust Extensions reallymake a statement. Their size and sixoutlets elude to the power of the 1800cc giant. Although the six “outlets” aremassive for the appearance of a highperformance exhaust system, they areactually sealed off and the exhaustgases are directed downward, out thebottom of the extension. This will keepthe visible end of the extension cleanand it will aid in keeping soot offsaddlebags and trailers. These extensions easily replace the stockmuffler tips and include necessarymounting hardware.

Triple Straight ExhaustExtensions

Kuryakyn Products

Documents

yamaha models

proseries hypercharger

kit fits vtx

warrior models air filter

kit fits road star

kit fits v star

kuryakyn products hypercharger

pairs fits road star