Kuhtreiber Catalogue EN 2010

www.kuhtreiber.cz

Kühtreiberkühtreiber

catalogue. . . welding for everyone . . .

welding machine manufacturer

InnovatIon and development - development and construction department of Company Kühtreiber ltd. Makes great efforts to satisfy and comply with requirements of particular customers and whole market within the Czech Republic and foreign countries. Great emphasis during development and construction of new machines is put on reliability, welding qualities, highest possible equipment and easy control.

selectIon - staff of development department of Company Kühtreiber ltd. have developed and the company produces at present more than 50 types and variants of welding machines KIt by methods MIG/MAG and more than 30 types of inverter machines KItin for welding by MMA and TIG methods.

• MMA inverters • TIG/WIG/MMA/DC AC/DC inverters with HF

(touchless) start, pulse and function CYCLE • 3-phase digital inverters MMA/LA-V/HF/MIG• MIG/MAG welding machines - half-automatic

machines with analogous, digital or synergic control

• Wire feeders • Water cooling of welding torch

Introduction of Kühtreiber ltd. companycompany KÜhtreIber ltd. was founded in 1998 as a family company which has been dealing with development, production and selling of welding machines including attachments for welding since the very beginning.

tradItIon - Company Kühtreiber ltd. with its team of experienced specialists with many years of practical experience in their branch continues long tradition of many years in the production of welding machines in Trebic, having started already in 1985.

bUssInes code - our aim is a satisfied customer - final consumer, or any of our business or service partner in the Czech Republic or anywhere in the world. We try to reach the highest quality and reliability of machines produced by us, fast and high-quality delivery of the machines, service, selling support and counselling.

dIstrIbUtIon - from the very beginning sales depart-ment of Company Kühtreiber ltd. has been building a wide business and distributing network in the Czech Republic. Gradually, the business and distribution network is expanding due to partners abroad.

servIce - a wide service network in the Czech Republic enables fast and high quality quarantee and after-quarantee service. Service is secured within the Czech Republic up to 48 hours either through our contract partners or our own service background.

traInInG - is run by training of our business and service partners every year and by providing wide sales and service documentation. Trained business or service partner, or a distributor in the Czech Republic or anywhere in the world provides more quality and specialised sales and after-sales service.

prodUctIon - careful choice of suppliers and continual training of staff in production, frequent checking of the standards and quality of products enable high standards and reliability of KIt and KItin products. All essential parts and components are self-made in the new builded plant. It conserns mainly production of printed circuit boards, transformers and converters, cases and all components from metal plate.

bussines partners in the world

some of vIsIted faIrs and exhIbItIons

2

KÜHTREIBER, s.r.o. - ČRKÜHTREIBER-POLSKA s.c.

KÜHTREIBER RUSSIA

Nitra, Slovakia 2008Moscow, Russia 2005 Petersburg, Russia 2006 Welding, Czech 2006 Essen, Germany 2005 MSV Brno, Czech 2007 Welding Brno, Czech 2008 MSV Brno, Czech 2008

Further on, Company Kühtreiber ltd. offers welding self-darkening masks, welding torches, spare parts of welding torches and welding machines, electrodes, etc.

Out of the total number of produced machines there are more than 45% designated for export into more than 35 countries of Europe and all over the world.

mIG/maG The easiest to learn, a possibility of automation • Possible high welding speeds - high productivity• Enables a better control on thiner materials • Provides cleaner welds without a slag • A possibility of welding with tube wire •

mmaMore suitable for windy, outdoor conditions • Easier for welding on dirty or corroded metal •

tIGProvides high quality and accurate welds • Highly aesthetic and good-looking welds • TIG AC enables excellent welding of aluminium • and its alloys A possibility of automation • TIG PULS - lower deformation while welding thin • materials; less brought-in warm into the welding material

Introduction of Kühtreiber ltd. company

List of Kühtreiber® machines functions

Welding machines Kühtreiber®

View of welding methods according to the welding material type

3

Metal Inert Gas / Metal Active Gas

MIG/MAG

Tungsten Inert Gas

TIG

Manual Metal Arc

MMA

synerGIcAutomatic setting of welding parameters

lIft arcEnsures precision ignation of welding arc by touching (not necessary to scratch) → low abrasion of wolframe electrode

aaeAuto Arc Extinction - automatic arc extinction (see picture on page 7 - Start and finishing of welding process TIG LA)

easy pUlseThe automatic optimal setting conformably to one parameter - suitable for the less experienced wel-ders

end cUrrentSetting of end current

tIG pUlsFor welding of thin materials; lowering of brought-in warm into welded material → lesser deformation

remote controlarc forceAn electronic function ensuring the arc stability

soft startThe soft start of welding process. It enables to set the time of start of wire speed

doWn slopeFilling a crater at finishing welding

hot startFunction for an easy ignition of the electric arc

dpcDinamic power control - dynamic reduction of ma-chine power input

spot pUlsFunctions spotting and interval welding

Job modePossibility of storing your own programmes

GeneratorEligible for using with mobile power source (gener-ator)

cyclePossibility of switching between two adjusted valu-es of current - eligible for materials with different thickness

soft poWer onPrevents outage of circuit brakers

v.r.d.Protective system MMA - in idle condition is on out-put clamps 15 V - inverter is off; after touching by electrode the inverter automaticaly turns on

UP-DOWNAn UP-DOWN remote control in the handle of the torch

restore proGramSimple and fast restoration of all characteristics to the basic state - preset from the production

bUrn bacKBurning-out of the wire to the girder after finishing welding

feed bacKAutomatic stabilisation of speed shift wire

easy UseEasy and well arranged operating

pUls balanceDetermines rate between high currrent and back current of pulsation

test Gas Function test gas

antI stIcKAt shortage (sticking of electrode) the welding cur-rent automaticaly drops to 10 A

type of metal

mm

a

mIG

ma

G

AC-

TIG

DC-

TIG

Carbon steels • • •

Low/high -alloyed steel • • •

Aluminium and its alloys • •

Iron •

Copper, brass • •

Titanium •

Magnesium - alloys •

Level of staff experience

med

ium

med

ium

low

high

high

three-phase digital inverter machine for welding method MMA, tiG and MiG/MAG

Kitin 220-270-320 MMA - Kitin 220-270-320 LA-V - Kitin 220-270-320 hF - Kitin 220-270-320 MiG

newnew

KITin 220 MMA KITin 270 MMA KITin 320 MMA KITin 220 LA-V KITin 270 LA-V KITin 320 LA-V KITin 220 HF KITin 270 HF KITin 320 HF KITin 220 MIG KITin 270 MIG KITin 320 MIGCode 50987 50986 50919 51003 51004 51005 50999 51000 50963 50995 50996 50531Welding method MMA/TIG-LA MMA/TIG-LA MMA/TIG-LA MMA/TIG-LA MMA/TIG-LA MMA/TIG-LA MMA/TIG-HF MMA/TIG-HF MMA/TIG-HF MIG/MAG MIG/MAG MIG/MAGSupply voltage 50/60 Hz V 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20% 3x400 +10% -20%

Protection A 16 16 25 16 16 25 16 16 25 16 16 25Duty cycle (40 °C) 100% A 200 220 220 200 220 220 200 220 220 200 220 220Duty cycle (40 °C) A - 250 / 80% 300 / 40% - 250 / 80% 300 / 40% - 250 / 80% 300 / 40% - 250 / 80% 300 / 40%Adjustable current A 10-200 10-250 10-300 10-200 10-250 10-300 10-200 10-250 10-300 - - -Adjustable welding voltage V - - - - - - - - - 8-30 8-30 8-30Maximum current A 300 330 380 300 330 380 300 330 380 220 250 300Peak welding current A - - - - - - - - - > 500 > 500 > 500Output voltage V 65 65 65 65 65 65 65 65 65 65 65 65Protection class IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 SDiameter of electrodes mm 1,5-5,0 1,5-5,0 1,5-5,0 1,5-5,0 1,5-5,0 1,5-5,0 1,5-5,0 1,5-5,0 1,5-5,0 - - -Wire feed speed m/min - - - - - - - - - 1-20 1-20 1-20Diameter of wire - steel - Al - tube

- - - - - - - - -0,6-1,21,0-1,20,9-1,6

0,6-1,21,0-1,20,9-1,6

0,6-1,21,0-1,20,9-1,6

Coupler 35-50 35-50 35-50 35-50 35-50 35-50 35-50 35-50 35-50 35-50 35-50 35-50Dimensions mm 530x190x430 530x190x430 530x190x430 540x190x430 540x190x430 540x190x430 540x190x430 540x190x430 540x190x430 595x270x430 595x270x430 595x270x430Weight kg 19 19 19 19,5 19,5 19,5 19,7 19,7 19,7 27 27 27FEATURES:function SOFT START - - - - - - - - - ano ano anofunction HOT START yes yes yes yes yes yes yes yes yes yes yes yesfunction DOWN SLOPE - - - yes yes yes yes yes yes yes yes yesfunction PULS - - - yes yes yes yes yes yes - - -function PULS - BALANCE - - - yes yes yes yes yes yes - - -function CYCLE - - - yes yes yes yes yes yes - - -function 2- / 4- STROKE yes / - yes / - yes / - yes / yes yes / yes yes / yes yes / yes yes / yes yes / yes yes / yes yes / yes yes / yesfunction LIFT ARC yes yes yes yes yes yes yes yes yes - - -function ANTI STICK yes yes yes yes yes yes yes yes yes yes yes yesfunction ARC FORCE yes yes yes yes yes yes yes yes yes - - -function V.R.D. yes yes yes yes yes yes yes yes yes - - -function DPC yes yes yes yes yes yes yes yes yes - - -function SOFT POWER ON yes yes yes yes yes yes yes yes yes yes yes yesfunction JOB MODE - - - yes yes yes yes yes yes yes yes yesfunction SYNERGIC - - - - - - - - - yes yes yestouch-free ignition - - - - - - yes yes yes - - -digital volt-ampere meter yes yes yes yes yes yes yes yes yes yes yes yesremote control connector yes yes yes yes yes yes yes yes yes yes yes yesgas ventil - - - yes yes yes yes yes yes yes yes yessocket for accessories yes yes yes yes yes yes yes yes yes - - -

4


Kitin 220-270-320 MMA - Kitin 220-270-320 LA-V - Kitin 220-270-320 hF - Kitin 220-270-320 MiG


descrIptIonNew portable welding machines KITin 220 MMA / LA-V / HF / MIG are designed as small, light and powerful digital three-phase inverters.

New generation digital controls ensure not only optimal settings of the welding characteristics, but their dynamic adaptation during the welding pro-cess as well. This way a substantially higher quality weld joint and simplification of welding process are achieved. A significant benefit is achieved in new functions, which help to keep the welding arc in an optimal working area. Due to this arc control tech-nology excellent results may be achieved even by less experience welders. New inverters KITin are designed for welding me-thod MMA/TIG/MIG/MAG.

Digital and progressive hardware design enabled significant reduction in weight, dimensions and consequently also in price of the new KITin inver-ters. The structure of the performance part itself is overdesigned to ensure reliability, high performan-ce and high load capacity.

KITin MIG are supplied with 2- and 4- roll wire fee-der, which has drifted both main and snub rolls for smooth usage with steel, stainless steel and alumi-nium wire. Rolls have diameter 30 mm.

rameters setting

eqUIpmentnew digital II. generation controls for welding • quality enhancement and simplification; ensures continues readjustment of welding characteristics to actual conditions during the welding processthe option for updating of control software • digital volt-ampere meter• fan blower shut off function - the fan blower • runs only when necessaryremote control connector• massive and compact design• practical socket for welding cables and electro-• des at the side cover (except KITin 220-320 MIG)

mma method accessorIes(MACHINES KITin 220-320 MMA, LA-V, HF, MIG)

ARC FORCE PLUS function for arc stabilization • with the option of setting the intensityHOT START function for easier arc ignition• ANTI STICK function for easier detachment of a • sticking electrodeV.R.D. and START CONTROL protection for assu-• ring work safetyDPC and SOFT POWER ON function for prob-• lem-free welding on a common electrical dis-tributor It is possible to use rutile, basic and aluminum • electrodes

hf method accessorIes(MACHINES KITin 220-320 LA-V, HF)

setting of gas pre-blow/after-blow, current • building up/ building down, 2/4 cycle, etc.PULS welding• PULS BALANCE for pulse welding• touch-free ignition (only KITin HF)• CYCLE function• ten memory slots for own programs •

mIG method accessorIes(MACHINES KITin 220-320 MIG)

continuous tension and wire movement speed • regulation SYNERGIC function - automatic setting of wel-• ding parametersSOFT START and HOT START functions settings • (for aluminum welding)continuous setting of wire burn-down•

continuous setting of arc dynamics• the option of saving own programs 10x• the option to use 5 kg and 15 kg wire spool• high performance and sturdy wire movement • 2x2 or 4x4

characterIstIcsexcellent welding properties • high performance while maintaining compact • dimension of the machinehigh performance cushion• simple and intuitive machine controls and pa-•

new

KITin 320 LA-V

KITin 320 MMA

KItin 320 HFKItin 320 MMA / LA-V KItin 320 MIG

CYCLE

VCYCLE

VCYCLE

V

DIGITAL CONTROL OF THREE-PHASE INVERTER MACHINES

UsaGeHigh performance, excellent welding properties and tough design predestine these machines for use in manufacturing and assembly firms, maintenance facilities, repair shops and heavy industry as well.

KITin 320 MIG Spool holder 5 - 15 kg

5

welding inverters

6

KITin 145 KITin 165 KITin 190 KITin 130 KITin 150KITin 150 TIG

LA/LA-VKITin 170

KITin 170TIG LA

KITin 150 LT-V

KITin 170 LT-V

KITin 190 LT-V

KITin 1500HF

KITin 1700HF

KITin 1900HF

TIG 200AC/DC P

TIG 315AC/DC P

Code 50023 50040 50094 50056 50207 50281/50538 50381 50466 50123 50124 50125 50113 50095 50112 TIG200PAC/DC TIG315AC/DC

Power supply 50/60 Hz V 1x230 1x230 1x230 1x230 1x230 1x230 1x230 1x230 1x230 1x230 1x230 1x230 1x230 1x230 1x230 3x400

Protection - slow A A 16 16 20 16 16 16 20 20 16 16 20 16 16 20 25 25

Welding current range A 10-140 10-160 10-180 10-130 10-150 10-150 10-170 10-170 10-140 10-160 10-180 10-140 10-160 10-180 5-200 10-315

Duty cycle 100% A 95 95 110 125 125 125 125 125 95 95 110 95 95 110 155 244

Duty cycle 60% A 120 120 150 - 140 140 140 140 120 120 150 120 120 150 200 315

Duty cycle at max. I 40% 45% 45% 45% 45% 45% 25% 25% 40% 45% 45% 40% 45% 45% - -

Mains current/input 60% 16A/3,6kVA 16A/3,6kVA 20A/4,7kVA 17,4A/4kVA 19A/4,3kVA 19A/4,3kVA 19A/4,3kVA 19A/4,3kVA 16A/3,6kVA 16A/3,6kVA 20A/4,7kVA 16A/3,6kVA 16A/3,6kVA 20A/4,7kVA 20A/4,5kVA 13,5A/8,9kVA

Open circuit voltage V 88 88 88 88 88 88 88 88 88 88 88 88 88 88 56 45

Protection degree IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 23 S IP 21 IP 21

Gladhand 10-25 10-25 35-50 10-25 10-25 10-25 10-25 10-25 35-50 35-50 35-50 35-50 35-50 35-50 35-50 35-50

Recommended type of torch - - - - - SR 17V/SR17 - SR 17V/SR17 SR 17 SR 17 SR 26 SR 17 SR 17 SR 26 - -

Dimensions mm 330x143x245 330x143x245 350x143x245 310x143x220 310x143x220 310x143x220 310x143x220 310x143x220 350x143x245 350x143x245 350x143x245 390x143x245 390x143x245 390x143x245 493x330x320 700x460x415

Weight kg 5,6 5,7 6,2 5,5 5,5 5,5 5,9 5,9 6,1 6,2 6,7 6,6 6,7 7,1 20 37

FEATURES:

function HOT START yes yes yes yes yes yes yes yes adjustable adjustable adjustable adjustable adjustable adjustable yes yes

function ARC FORCE yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes

function ANTI STICK yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes

function V.R.D. - - - - - yes - yes - - - - - - - -

function LIFT ARC - - - - - yes - yes yes yes yes - - - - -

function TIG PULS - - - - - yes - yes yes yes yes yes yes yes - -

function FREQUENCE OF PULS. - - - - - yes - yes yes yes yes yes yes yes - -

function DOWN SLOPE - - - - - yes - yes yes yes yes yes yes yes - -

function END CURRENT - - - - - yes - yes yes yes yes yes yes yes yes yes

function AAE - - - - - yes - yes - - - - - - - -

function CYCLE - - - - - - - - yes yes yes yes yes yes - -

function FOUR-STROKE - - - - - - - - yes yes yes yes yes yes yes yes

gas ventil - - - - - -/yes - -/yes yes yes yes yes yes yes yes yesstrap belt for easy carrying yes yes yes yes yes yes yes yes yes yes yes yes yes yes - -

SUITABLY ACCESSORIES:

welding cables yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes

suitcase for inverter and accessory yes yes yes yes yes yes yes yes yes yes yes yes yes yes - -

remote control yes yes yes yes yes - yes - yes yes yes yes yes yes yes yesself-darkening mask yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes

electrodes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes

welding torch TIG yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes

aUtomatIc Gas ELECTROVALVE (ONLY KItin TIG LA-V)

descrIptIonKITin 150-170 TIG LA and KITin 150-170 TIG LA-V inverteres are professional welding machines of the third generation constructed with utilisation of IGBT technology with fast microprocessor regulati-on. Machines are noted with high loading (125 A at 100%) and performance and equipment.

Controls of machine are integrated in keyboard of new generation, which suplies standart mecha-nic solution. Herewith is expansion of reliability and exactness controls.

characterIstIcs and eqUIpment• Function control input starin - security by decline

of strain. In cases of decline of strain under the security level is invertor automaticaly switch off and on the display you can see E-1 (only TIG LA-V).

• Summary display showing setting-values.• TIG end current.• Welding torch without button and tyre valve

(not necessary to press the button and send out gas (only variant TIG LA-V).

• For variants TIG LA-V there is an automatic gas electro-valve.

START AND FINISHING OF WELDING PROCESS TIG LA

1

23

45

6

7

Approaching the wolfram electrode to the welding materialTouching the wolfram electrode and the welding material Removing the wolfram electrode and ignition of welding arc with the use of LIFT ARC - very low abra-sion of the wolfram electrode by touch.Welding process.Finishing of the welding process and activating DOWN SLOPE is carried out when you remove the wolfram electrode for about 8-10 mm from the welding materialRe-approaching - welding current is decreased for adjusted period of time (0 up to 5 sec.) on adjusted value of end current (e.g. 10 A) - filling a crater.Finishing of the welding process. The digital control switches the welding process automatically off - function AAE.

UsaGeAre the excellent choice for usage in production, assem-bly, metal production, maintenance or in a utitity room.

Digital welding inverter for welding with stick electrode and method tiG LiFt ArC

Kitin 150 tiG LA / LA-V - Kitin 170 tiG LA / LA-V

descrIptIonKITin 130 up to 170 are inverter welding machines designed with the usage of new IGBT technology with fast regulation - FAST CONTROL. The machi-nes feature high load factors and power (125 A at 100%), low power consumption, excellent welding properties, low weight, small dimensions and main-ly high reliability. These machines are intended for operation, where is laid high emphasis to maximal usage value and high power for favourable price. All machines are fitted with function REMOTE CON-TROL (possible connection of the remote control device).

UsaGeThey are the right choice for their use in producti-on, in metal production, during assembling, in ma-intenance or utility rooms.

characterIstIcs and eqUIpment• Low consumption of energy and high perfor-

mance.• Excellent welding qualities with methods MMA

and TIG.• Low weight and small size.• Reliable construction.• Temperature protection with indicator LED.• High load factors.

In case of using electro-central we recommend generators KÜHTREIBER®

Kitin 130 - Kitin 150 - Kitin 170

descrIptIonThe welding inverter machines KITin 145 to 190 are electronic welding current sources with FAST CON-TROL featuring excellent welding properties, robust construction, high power, low weight and mainly high reliability. These machines are intended for operation, where is laid high emphasis to maximal usage value and high power for favourable price. All machines are fitted with function REMOTE CON-TROL (possible connection of the remote control device). The machines are good in welding by the TIG method with the contact sparking.

characterIstIcs and eqUIpment• Low consumption of energy and high perfor-

mance.• Excellent welding qualities with methods MMA

and TIG.• Low weight and small size.• Reliable construction.• Temperature protection with indicator LED.• High load factors.

UsaGeThey are the right choice for their use in producti-on, in metal production, during assembling, in ma-intenance or utility rooms.

Kitin 145 - Kitin 165 - Kitin 190

Welding inverter machines for welding with stick electrode and method tiG

7

descrIptIontIG ac/dc are professional welding inventers de-signed for welding with methods MMA (covered electrode), TIG, TIG PULS and TIG AC/DC with no touch start (welding in shielding gas with a non-s-melting electrode). Inverters are designed as porta-ble sources of welding current. Welding inverters TIG are designed with the use of a high-frequency transformer with a ferrite core, transistors and they are equipped with electronic functions HOTSTART (for easier arc ignition) and ANTI STICK (it prevents sticking the electrode).

The cooling unit of welding torch K315W is de-signed as a closed water circuit equipped with a pump, a cooler, a tank and an air-pressure switch.

Input and output of cooling liquid is equipped with quick-acting couplings with a possibility to join wa-ter cooling welding torches MIG/MAG and TIG.

UsaGeThey are the right cho-ice for their use in ma-nufacturing, assemb-ling, metal production, maintenance or utility rooms.

Welding inverter AC/DC with no touch ignition for welding method MMA and tiG hF AC/DC

tiG 200 AC/DC P - tiG 315 AC/DC P

descrIptIonKITin 1500HF - 1900HF are inverter 1-phase wel-ding machines designed with the use of new IGBT technology with fast microprocessor regulation. Machines are fully equipped and designed for welding method TIG with no touch start HF. While using method TIG, stainless, copper and its alloys can be welded.

mIcroprocessor control enables• Adjustment of methods MMA/TIG LT and TIG HF• Time adjustment of function HOT START in MMA• Welding current adjustment • Switching on function PULS and its adjustment

in the frequency range of 1 - 500 Hz• Adjustment of primary and welding current in

TIG PULS• Switching on function as of welding current run

out - DOWN SLOPE and its adjustment in the range of 0,1-5 sec.

• Adjustment of end welding current form 5 A• Adjustment of gas fore-blow/after-blow in the

range of 0-10 sec.• Adjustment of 2. weld. current in CYCLE 4-stroke

characterIstIcs and eqUIpment• Well-arranged display showing adjusted values.• Simple and well-arranged graphics with big

buttons.• Function TIG HF.• TIG UP/DOWN SLOPE.• Adjustable gas fore-

blow / after-blow.• Remote control connec-

tor UP-DOWN in the handle of the torch.

Kitin 1500hF - Kitin 1700hF - Kitin 1900hF

descrIptIonKITin 150LT-V - 190LT-V are inverter welding machi-nes of the third generation designed with the use of IGBT technology with fast microprocessor regu-lation. Machines are fully equipped and modified for comfortable welding method TIG with function LIFT TIG.

characterIstIcs and eqUIpment• Well-arranged display showing adjusted

values.• Simple and well-arranged graphics with big

buttons.• Function TIG LT.• Electromagnetic valve for easy control of gas

flow directly by button on torch.• Remote control connector UP-DOWN in the

handle of the torch.UsaGeKITin 150LT - 190LT are the right choice for their use in manufacturing, assembling, in metal production, maintenance or utility rooms.

Kitin 150Lt-V - Kitin 170Lt-V - Kitin 190Lt-V

Digital inverter for welding with stick electrode and method tiG Lt and no touch ignition for MMA and tiG hFmIcroprocessor control enables• Adjustment of methods MMA and TIG LT. • Time adjustment of function HOT START in MMA.• Welding current adjustment. • Switching on function PULS and its adjustment

within the frequency range of 0,5 - 500 Hz.• Adjustment of primary and welding current in

TIG PULS.• Switching on function as of welding current run

out - DOWN SLOPE and its adjustment within the range of 0,1-10 sec.

• Adjustment of end welding current from 5 A.• Adjustment of gas after-blow within the range

of 0,5-15 sec.• Adjustment of 2. weld. current in CYCLE 4-stroke

UsaGeKITin 1500HF - 1900HF they are the right choice for their use in manufacturing, assembling, in metal production, maintenance or utility rooms.

characterIstIcs and eqUIpment• Low consumption of energy and high

performance.• Very good welding qualities with methods TIG

and MMA.• Low weight and small size.• Digital display.• Easy control of all parameters with potentiometers.• Temperature protection with indicator LED.• Enables to set gas fore-blow and after-blow,

finishing current, balance AC (direction of electrones flow adjusting - it helps to distort the layer of oxides while welding aluminium).

• Remote control connector (possibility of connecting manual remote control or foot-operated - pedal).

• Gas quick-acting coupling.

8

8020 - 8030 - 8040

7030

SELF-DARKENING masK KÜhtreIber® 700SRegulation of darkness DIN 9-13, suitable for TIG- code 005850001

Digital inverter for welding with stick electrode and method tiG Lt and no touch ignition for MMA and tiG hF

descrIptIonProfessional generators KÜhtreIber® are intended for ap-plication in demanding operation, in building, wrecking, emer-gency and critical stocking and there, where is necessary to have stable and reliable single ore three phase source of elec-trical energy. Nucleus of machine are super americal motors KOHLER, revisioned of hundred aplications in the industry, building, agronomy and other field. Combination with effici-ent alternator SINCRO -secured reliability and stability output strain, currents and frequency.

characterIstIcs and eqUIpment• High reliability, duality and security.• Low noisiness.• Low operating costs.• Current security, oil watchmen, voltmeter.• Vote accessories: counter of moto-time, undercart, bonnet.• Massive multitube frame is propositioned by ergonomically

principle and provide sufficient safety all important part of machine.

• Dual antivibrational system lows noises machines and limits attrition by operation in effect oversize vibration.

• Control, mensuration and output are digestedly organized and respect all wishes for ergonomics and comfort of service.

Generators Kühtreiber® 8020 - 8030 - 8040 - 7030

Generators Kühtreiber®

OUtDOOr Kit - accessory equipment to welding inverter

tIG WeldInG torchFor more information about welding torch see on the page 18.

Gas bottle2 litres, pressure up to 200 bar (up to 100 min.) - code 7108

WeldInG cablefor KITin 130, 145, 150, 165, 170 a LA3/16 10-25 - code 101025/16 10-25 - code 101033/25 10-25 - code104025/25 10-25 - code 10104for KITin 190, LT a HF3/25 35-50 - code 102015/25 35-50 - code102333/35 35-50 - code 101635/35 35-50 - code 10633

compressatInG PIPE - ARGONDesigned for passing Ar from a big gas cylinderwithout a manometer - code 71003with a manometer - code 71002

MATAL PLASTIC

REMOTE CONTROL UP-DOWN WIth connectorfor KITin plastic, length 10 m - code 10499for KITin metal, length 10 m - code 10241for KITin HF plastic, up-down 10 m - code 10611for KITin HF metal, up-down, 10 m - code 10612

control valveFor more information about pressure control valve see the page 19.

sUItcase for Inverters and accessorIes for KITin 130-190 - code KUFR145.165for KITin HF - code KUFR 1900HF

vacUUm pacKaGe basIc electrodes KÜhtreIber®E 7018-1 Ø 2,5x350 mm - code 115480 E 7018-1 Ø 3,2x450 mm - code 115434

9

GEn

ERAT

OR

MO

TOR

technIcal data 8020 8030 8040 7030Code C8020 C8030 C8040 C7030Type EK2LCT EK2LCA EK2LCA ET2MCR• Engine power 3F/1F kVA - /8,0 - /8,0 - /8,0 7,0/4,0• Eletric power V 230 230 230 400/230• Frequence Hz 50 50 50 50• Current A 34,7 34,7 34,7 10,1/17,5• Stability U/freq. % 6/1 1/1 1/1 1/1• Power factor - cos 1 1 1 0,8 (1)• Voltage regulation compound AVR AVR AVRType K.CS12GST K.CS12GT K.CS12GST K.CS12GT• Displacement cm3 360 360 360 360• Power kW/HP 9/12 9/12 9/12 9/12• Starting el. + manual manual el. + manual manual• Cooling air air air air• Nose level dB 96 96 96 96• Fuel consumption l/hour 2,1 2,1 2,1 2,2• Fuel tank volume l 7 7 7 7• Fuel unleaded < 89 Protection IP 23 IP 23 IP 23 IP 23Starting automatics optional no optional noDimensions mm 800x532x570 800x532x570 800x532x570 800x564x570Weight Kg 86 79 86 79

for KITin

for KITin HF

welding MiG/MAG machines

10

KIT 155 KIT 169 KIT 205KIT 205

EconomicKIT 215E KIT 225

KIT 225 Economic


EconomicKIT 309 KIT 384 KIT 389 KIT 405

KIT 405Economic

KIT 400WKIT 400WEconomic

KIT 500 /500W

KIT 500WEconomic

KIT 305S KIT 405SKIT 400S /

400WSKIT 400WS Economic

KIT 500S / 500WS

KIT 500WS Economic

KIT 600WS

Code - STANDARD - PROCESSOR - SYNERGIC

50009--

50734--

502755039450427

50940--

505545070850709

502785039550428

50927--

505555055750558

5004950306KIT280

502175039650429

-50929

-

5070250804

-

502185039750495

5090550920

-

500325059350307

-50931

-

502855057350577

-50936

-

50571/5027950574/5057550578/50548

-50935

-

5056150562

KIT305S-SY

5050450740

KIT405S-SY

50580/5028450582/50584

- / KIT400WS-SY

-50937

-

50581/5032550583/50585 - / 50924

-50938

-

5002050092

-Power supply 50/60 Hz V 1x230 1x230 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400Protection - slow A 16 16 16 16 16 16 16 16 25 25 25 16 25 25 25 25 25 25 32 32 25 25 25 25 32 32 63Welding current range A 30-155 30-155 40-190 40-190 40-190 30-195 30-195 30-195 30-280 30-280 30-280 30-250 30-350 30-350 30-350 30-350 30-350 30-350 30-450 30-450 30-280 30-350 30-350 30-350 30-450 30-450 50-700Output voltage settings V 24-44 24,5-45,5 19-39 19-39 19-39 19-34 19-34 19-34 17-38 17-38 17-38 17,7-39,2 18-40 20-49 18-40 18-40 18-40 18-40 20-50 20-50 17-38 18-40 18-40 18-40 20-50 20-50 19-51Duty cycle 100% A 55 55 80 75 90 120 100 140 220 220 180 170 260 210 260 220 260 240 310 300 220 260 260 240 310 300 480Duty cycle 60% A 70 70 95 90 120 150 130 160 260 260 210 200 300 230 300 260 310 290 430 400 260 300 310 290 430 400 600

Duty cycle A 155 / 25% 155 / 25% 190 / 15% 180 / 25% 190 / 25% 195 / 25% 195 / 15% 195 / 25% 280 / 30% 280 / 30% 250 / 30% 250 / 30% 350 / 30% 320 / 30% 350 / 30% 320 / 30% 350 / 35% 350 / 30% 450 / 45% 450 / 30% 280 / 30% 350 / 30% 350 / 30% 350 / 30% 450 / 30% 450 / 30% 700 / 30%

Mains current/input 60% 6A/1,4kVA 6A/1,4kVA 5A/3,4kVA 4,5A/3,2kVA 6A/4,2kVA 6,8A/4,6kVA 6A/4,2kVA 7,5A/5,2kVA 12,3A/8,6kVA 12,3A/8,6kVA 9,5A/6,6kVA 9,5A/6,6kVA 15,3A/10,6kVA 10A/7kVA 15,3A/10,6kVA 13A/9kVA 15,3A/10,6kVA 15A/10,4kVA 25A/17,3kVA 20A/13,9kVA 12,3A/8,6kVA 15,3A/10,6kVA 15,3A/10,6kVA 15A/10,4kVA 25A/17,3kVA 20A/13,9kVA 32A/21,0kVAWinding Cu Cu/Al Cu Cu Cu Cu Cu Cu Cu Cu Cu Cu/Al Cu Cu/Al Cu Cu Cu Cu Cu Cu Cu Cu Cu Cu Cu Cu CuNo. of adjustment point 6 6 10 10 10 10 10 10 20 20 20 10 40 21 40 40 40 40 40 40 20 40 40 40 40 40 40Digital volt-ampere meter no no only PR.+SYN. no only PR.+SYN. only PR.+SYN. no only PR.+SYN. only PR.+SYN. yes yes only PROC. yes only PROC. yes yes yes yes yes yes yes yes yes yes yes yes yesWire feed 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 4-roll 2-roll 4-roll 4-roll 4-roll 4-roll 2/4-roll at selected type of feed 4-roll 4-roll 4-roll 4-roll 4-rollStandard equipt roll 0,6-0,8 0,6-0,8 0,6-0,8 0,6-0,8 0,6-0,8 0,8-1,0 0,8-1,0 0,8-1,0 1,0-1,2 1,0-1,2 1,0-1,2 0,8-1,0 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2

Wire feed speed m/min 1-20 1-201-25 STAND., 0,5-20 PROC.

a SYN.1-25

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

a SYN.1-25

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

a SYN.0,5-20

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

1-25 STAND., 0,5-20 PROC.

a SYN.0,5-20

1-25 STAND., 0,5-20 PROC.

a SYN.0,5-20

1-25 STAND., 0,5-20 PROC.

a SYN.0,5-20

1-25 STAND., 0,5-20 PROC.

1-25 STAND.,0,5-20 PROC.

1-25 STAND.,0,5-20 PROC.

0,5-201-25 STAND.,0,5-20 PROC.

0,5-201-25 STAND., 0,5-20 PROC.

Diameter of wire - Steel - Al - Flux coret

0,6-0,8--

0,6-0,8--

0,6-0,80,8-1,00,8-1,0

0,6-0,80,8-1,00,8-1,0

0,6-0,80,8-1,00,8-1,0

0,8-1,00,8-1,00,8-1,0

0,8-1,00,8-1,00,8-1,0

0,8-1,00,8-1,00,8-1,0

0,6-1,20,8-1,20,8-1,2

0,6-1,20,8-1,20,8-1,2

0,6-1,20,8-1,20,8-1,2

0,6-1,20,8-1,2

-

0,6-1,21,0-1,20,8-1,2

0,6-1,21,0-1,20,8-1,2

0,6-1,21,0-1,20,8-1,2

0,6-1,21,0-1,20,8-1,2

0,6-1,20,8-1,21,0-1,2

0,6-1,20,8-1,21,0-1,2

0,6-1,60,8-1,61,0-2,4

0,6-1,20,8-1,21,0-1,2

0,6-1,20,8-1,20,8-1,2

1,0-1,21,0-1,20,8-1,2

0,6-1,2/0,6-1,60,8-1,61,0-2,4

0,6-1,60,8-1,61,0-2,4

0,6-1,2/0,6-1,60,8-1,61,0-2,4

0,6-1,60,8-1,61,0-2,4

0,6-2,00,8-2,41,0-2,4

Protection degree IP21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21Standards ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199Dimensions mm 740x335x610 790x485x660 790x485x660 790x485x660 790x485x660 790x485x660 790x485x660 790x485x660 835x480x840 835x480x840 835x480x840 800x490x740 835x480x840 835x480x840 835x480x840 835x480x840 850x630x710 850x630x710 850x630x710 850x630x710 835x480x840 835x480x840 920x615x700 920x615x700 920x615x700 920x615x700 1060x690x965Weight kg 35 40 52 52 53 62 62 68 98 98 98 88 104 105 104 104 141 129 141/151 151 98 104 131/137 125 167/173 147 230FEATURES:Function 2-STROKE / 4-STROKE - - ST, P, SY ST ST, P, SY ST, P, SY ST ST, P, SY ST, P, SY ST, P, SY P ST, P ST, P, SY ST, P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction BURN BACK - - P, SY - P, SY P, SY - P, SY P, SY ST, P, SY P P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction RESTORE PROGRAM - - SY - SY SY - SY SY SY - - SY - SY - SY - SY - SY SY SY - SY - -Function EASY USE ST ST ST, P, SY ST ST, P, SY ST, P, SY ST ST, P, SY ST, P, SY ST, P, SY P ST, P ST, P, SY ST, P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction JOB MODE - - SY - SY SY - SY SY SY - - SY - SY - SY - SY - SY SY SY - SY - -Function PRE-GAS / POST-GAS - - P, SY - P, SY P, SY - P, SY P, SY ST, P, SY P P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction SPOT PULS - - ST, P, SY ST ST, P, SY ST, P, SY ST ST, P, SY ST ST, P, SY P ST, P ST, P, SY ST, P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction FEED BACK - - P, SY - P, SY P, SY - P, SY P, SY ST, P, SY P P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, P

Function UP-DOWN - - P, SY - P, SY P, SY - P, SY P, SY P, SY P P P, SY P P, SY P P, SY P P, SY P P, SY P, SY P, SY P P, SY P P

Function SOFT START - - P, SY - P, SY P, SY - P, SY P, SY P, SY P P P, SY P ST, P, SY P P, SY P P, SY P P, SY P, SY P, SY P P, SY P PFunction GENERATOR - - ST, P, SY ST ST, P, SY ST, P, SY ST ST, P, SY ST, P, SY ST, P, SY P ST, P ST, P, SY ST, P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction TEST GAS - - P, SY - P, SY P, SY - P, SY P, SY ST, P, SY P P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, P

featUres standard• Analogue feedback control of wire

feeding speed.• Digital volt-ampere meter with memory.• Adjustable functions of gas fore-blow/

after-blow, wire let-out and burning out.• Functions of the wire introduction

and gas test, 4-stroke/2-stroke, point welding and pulsing.

featUres processor• Equal regulation of wire shift from

0,5 to 20 m/min with fine control by 0,1 m/min.

• Digital indicator of the wire feed speed.

• The connector of the remote control UP/DOWN. A possibility of connecting the remote control in the torch handle.

• Digital voltammeter with memory - functions HOLD.

• Function EASY USE - ecures easy and well-arranged operating.

• Function RESTORE PROGRAM - simple and fast comeback of all characteristics to the basic state - preset from the production.

• It enables adjustment of time values of counterblow / final blow of gas, wire residual burning.

• Function SOFT START - soft start of the welding process. This function enables time setting of wire speed start.

• Functions of the wire introduction and gas test, 4-stroke/2-stroke, point welding and pulsing.

featUres synerGIc• The same equipment as Processor.• Function SYNERGIC - automatic adjust-

ment of welding parameters.• Standard equipment up to 8 prog-

rammes for common steels (2 type of gas and 6 Ø of wire).

• A possibility of programme correction of Synergic machine.

• A possibility of simple recording of your own programmes - to 160 welding parameters.

ST = variant STANDARDP = variant PROCESSORSY = variant SYNERGIC

11


EconomicKIT 215E KIT 225

KIT 225 Economic


EconomicKIT 309 KIT 384 KIT 389 KIT 405

KIT 405Economic

KIT 400WKIT 400WEconomic

KIT 500 /500W

KIT 500WEconomic

KIT 305S KIT 405SKIT 400S /

400WSKIT 400WS Economic

KIT 500S / 500WS

KIT 500WS Economic

KIT 600WS


50009--

50734--

502755039450427

50940--

505545070850709

502785039550428

50927--

505555055750558

5004950306KIT280

502175039650429

-50929

-

5070250804

-

502185039750495

5090550920

-

500325059350307

-50931

-

502855057350577

-50936

-

50571/5027950574/5057550578/50548

-50935

-

5056150562

KIT305S-SY

5050450740

KIT405S-SY

50580/5028450582/50584

- / KIT400WS-SY

-50937

-

50581/5032550583/50585 - / 50924

-50938

-

5002050092

-Power supply 50/60 Hz V 1x230 1x230 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400 3x400Protection - slow A 16 16 16 16 16 16 16 16 25 25 25 16 25 25 25 25 25 25 32 32 25 25 25 25 32 32 63Welding current range A 30-155 30-155 40-190 40-190 40-190 30-195 30-195 30-195 30-280 30-280 30-280 30-250 30-350 30-350 30-350 30-350 30-350 30-350 30-450 30-450 30-280 30-350 30-350 30-350 30-450 30-450 50-700Output voltage settings V 24-44 24,5-45,5 19-39 19-39 19-39 19-34 19-34 19-34 17-38 17-38 17-38 17,7-39,2 18-40 20-49 18-40 18-40 18-40 18-40 20-50 20-50 17-38 18-40 18-40 18-40 20-50 20-50 19-51Duty cycle 100% A 55 55 80 75 90 120 100 140 220 220 180 170 260 210 260 220 260 240 310 300 220 260 260 240 310 300 480Duty cycle 60% A 70 70 95 90 120 150 130 160 260 260 210 200 300 230 300 260 310 290 430 400 260 300 310 290 430 400 600

Duty cycle A 155 / 25% 155 / 25% 190 / 15% 180 / 25% 190 / 25% 195 / 25% 195 / 15% 195 / 25% 280 / 30% 280 / 30% 250 / 30% 250 / 30% 350 / 30% 320 / 30% 350 / 30% 320 / 30% 350 / 35% 350 / 30% 450 / 45% 450 / 30% 280 / 30% 350 / 30% 350 / 30% 350 / 30% 450 / 30% 450 / 30% 700 / 30%

Mains current/input 60% 6A/1,4kVA 6A/1,4kVA 5A/3,4kVA 4,5A/3,2kVA 6A/4,2kVA 6,8A/4,6kVA 6A/4,2kVA 7,5A/5,2kVA 12,3A/8,6kVA 12,3A/8,6kVA 9,5A/6,6kVA 9,5A/6,6kVA 15,3A/10,6kVA 10A/7kVA 15,3A/10,6kVA 13A/9kVA 15,3A/10,6kVA 15A/10,4kVA 25A/17,3kVA 20A/13,9kVA 12,3A/8,6kVA 15,3A/10,6kVA 15,3A/10,6kVA 15A/10,4kVA 25A/17,3kVA 20A/13,9kVA 32A/21,0kVAWinding Cu Cu/Al Cu Cu Cu Cu Cu Cu Cu Cu Cu Cu/Al Cu Cu/Al Cu Cu Cu Cu Cu Cu Cu Cu Cu Cu Cu Cu CuNo. of adjustment point 6 6 10 10 10 10 10 10 20 20 20 10 40 21 40 40 40 40 40 40 20 40 40 40 40 40 40Digital volt-ampere meter no no only PR.+SYN. no only PR.+SYN. only PR.+SYN. no only PR.+SYN. only PR.+SYN. yes yes only PROC. yes only PROC. yes yes yes yes yes yes yes yes yes yes yes yes yesWire feed 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 2-roll 4-roll 2-roll 4-roll 4-roll 4-roll 4-roll 2/4-roll at selected type of feed 4-roll 4-roll 4-roll 4-roll 4-rollStandard equipt roll 0,6-0,8 0,6-0,8 0,6-0,8 0,6-0,8 0,6-0,8 0,8-1,0 0,8-1,0 0,8-1,0 1,0-1,2 1,0-1,2 1,0-1,2 0,8-1,0 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2 1,0-1,2

Wire feed speed m/min 1-20 1-201-25 STAND., 0,5-20 PROC.

a SYN.1-25

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

a SYN.1-25

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

a SYN.0,5-20

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

a SYN.

1-25 STAND., 0,5-20 PROC.

1-25 STAND., 0,5-20 PROC.

a SYN.0,5-20

1-25 STAND., 0,5-20 PROC.

a SYN.0,5-20

1-25 STAND., 0,5-20 PROC.

a SYN.0,5-20

1-25 STAND., 0,5-20 PROC.

1-25 STAND.,0,5-20 PROC.

1-25 STAND.,0,5-20 PROC.

0,5-201-25 STAND.,0,5-20 PROC.

0,5-201-25 STAND., 0,5-20 PROC.


0,6-0,8--

0,6-0,8--

0,6-0,80,8-1,00,8-1,0

0,6-0,80,8-1,00,8-1,0

0,6-0,80,8-1,00,8-1,0

0,8-1,00,8-1,00,8-1,0

0,8-1,00,8-1,00,8-1,0

0,8-1,00,8-1,00,8-1,0

0,6-1,20,8-1,20,8-1,2

0,6-1,20,8-1,20,8-1,2

0,6-1,20,8-1,20,8-1,2

0,6-1,20,8-1,2

-

0,6-1,21,0-1,20,8-1,2

0,6-1,21,0-1,20,8-1,2

0,6-1,21,0-1,20,8-1,2

0,6-1,21,0-1,20,8-1,2

0,6-1,20,8-1,21,0-1,2

0,6-1,20,8-1,21,0-1,2

0,6-1,60,8-1,61,0-2,4

0,6-1,20,8-1,21,0-1,2

0,6-1,20,8-1,20,8-1,2

1,0-1,21,0-1,20,8-1,2

0,6-1,2/0,6-1,60,8-1,61,0-2,4

0,6-1,60,8-1,61,0-2,4

0,6-1,2/0,6-1,60,8-1,61,0-2,4

0,6-1,60,8-1,61,0-2,4

0,6-2,00,8-2,41,0-2,4

Protection degree IP21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21Standards ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199 ISO/IEC 60974-1, EN 50199Dimensions mm 740x335x610 790x485x660 790x485x660 790x485x660 790x485x660 790x485x660 790x485x660 790x485x660 835x480x840 835x480x840 835x480x840 800x490x740 835x480x840 835x480x840 835x480x840 835x480x840 850x630x710 850x630x710 850x630x710 850x630x710 835x480x840 835x480x840 920x615x700 920x615x700 920x615x700 920x615x700 1060x690x965Weight kg 35 40 52 52 53 62 62 68 98 98 98 88 104 105 104 104 141 129 141/151 151 98 104 131/137 125 167/173 147 230FEATURES:Function 2-STROKE / 4-STROKE - - ST, P, SY ST ST, P, SY ST, P, SY ST ST, P, SY ST, P, SY ST, P, SY P ST, P ST, P, SY ST, P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction BURN BACK - - P, SY - P, SY P, SY - P, SY P, SY ST, P, SY P P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction RESTORE PROGRAM - - SY - SY SY - SY SY SY - - SY - SY - SY - SY - SY SY SY - SY - -Function EASY USE ST ST ST, P, SY ST ST, P, SY ST, P, SY ST ST, P, SY ST, P, SY ST, P, SY P ST, P ST, P, SY ST, P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction JOB MODE - - SY - SY SY - SY SY SY - - SY - SY - SY - SY - SY SY SY - SY - -Function PRE-GAS / POST-GAS - - P, SY - P, SY P, SY - P, SY P, SY ST, P, SY P P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction SPOT PULS - - ST, P, SY ST ST, P, SY ST, P, SY ST ST, P, SY ST ST, P, SY P ST, P ST, P, SY ST, P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction FEED BACK - - P, SY - P, SY P, SY - P, SY P, SY ST, P, SY P P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, P

Function UP-DOWN - - P, SY - P, SY P, SY - P, SY P, SY P, SY P P P, SY P P, SY P P, SY P P, SY P P, SY P, SY P, SY P P, SY P P

Function SOFT START - - P, SY - P, SY P, SY - P, SY P, SY P, SY P P P, SY P ST, P, SY P P, SY P P, SY P P, SY P, SY P, SY P P, SY P PFunction GENERATOR - - ST, P, SY ST ST, P, SY ST, P, SY ST ST, P, SY ST, P, SY ST, P, SY P ST, P ST, P, SY ST, P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, PFunction TEST GAS - - P, SY - P, SY P, SY - P, SY P, SY ST, P, SY P P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY P ST, P, SY ST, P, SY ST, P, SY P ST, P, SY P ST, P

MEM ERASE

4x4 TO ORDER

descrIptIonKIT 205 - 215E - 225 - 245 are professional welding machines. The main advantages are excellent wel-ding capabilities, 10-grade voltage control, high power, high load factors, high reliability and very easy operating of versions Processor and Synergic.In the case of Synergic machine it is, in addition, automatic adjustment of welding parameters and a possibility of programming.Standard equipment with 4 or more precisely 6 pro-grammes for common steels (2 types of gas and 4 Ø of wire). A possibility of simple recording of your own programmes - 40 - 60 welding parameters

Kit 205 - Kit 215e - Kit 225 - Kit 245

descrIptIonWelding machines KIT 169 are representatives of small MIG/MAG welding machines designed for using in small workshops such as locksmithery, me-tal manufactury, services etc. Machine KIT 169 is equiped with cooling fan, indu-ctor, robust 2-roll metal wire feeder, powerfull mo-tor of wire feeder and EURO connector. The main advantages are easy operating, excellent welding capabilities and reliability.

UsaGeMachines are designed for production in medium-heavy or heavy engineering, maintenance plants, metal-working industry, locksmithery or utility ro-oms.

Kit 169

descrIptIonThe welding machine KIT 155 is representative of small welding machines intended for car body workshops, locksmith works, small metal producti-on plants and maintenance shops. The KIT 155 machine is fitted against many machi-nes of the same category with the copper primary / secondary transformer winding, cooling fan, in-ductor, high-power motor for the wire feeder and with the EURO connector. The main advantages are simple control, very good welding capabilities and high reliability.

UsaGeKIT 155 are excellent choice for usage in assembly sites in maintenance.

Kit 155

MiG/MAG compact welding machines for medium and heavy-machinery production

UsaGeMachines are designed for production in medium-heavy or heavy engineering, maintenance plants, metal-working industry, locksmithery or utility ro-oms.

StANDArD

PrOCeSSOr

SYNerGiC

StANDArD

sta

nd

ar

dsy

ner

GIc

pro

cess

or

des

IGn

co

ntr

ol

pan

el

STANDARD EQUIPMENT

12

STANDARD EQUIPMENT

sta

nd

ar

dsy

ner

GIc

pro

cess

or

STANDARD EQUIP-MENT KIT 405


descrIptIonKIT 400W - 500W are professional welding machi-nes equipped with a high-powered transformer with copper primary and secondary winding, ro-bust all-metal wire shift with a high-powered motor, a EURO connector and high-powered electronics.The main advantages are excellent welding capa-bilities, 40-grade voltage control, high power, high load factors, high reliability and very easy operating of versions Processor and Synergic. In the case of Synergic machine, it is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment with 6 or more precisely 8 programmes for com-mon steels (2 types of gas and 6 Ø of wire), a possi-bility of simple recording of your own programmes

UsaGeMachines are designed for medium and heavy-machine-ry production, maintenance plants, metal-production, for locksmiths or utility rooms.

Kit 400W - Kit 500/500W

descrIptIonKIT 280 - 305 - 309 - 384 - 389 - 405 are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire shift with a high-powered motor, a EURO connector and high-powe-red electronics.The main advantages are excellent welding capa-bilities, 10-grade, 20-grade, 21-grade or 40-grade voltage control, high power, high load factors, high reliability and very easy operating of versions Pro-cessor and Synergic.In the case of Synergic machine, it is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment

with 6 or more precisely 8 programmes for common steels (2 types of gas and 6 Ø of wire), a possibility of simple recording of your own programmes - 120 up to 160 welding parameters.All this machines (except KIT 280, 309 a 389) are equiped with adjustable functions of pre-blow/af-ter-blow and burnout of wire.

Kit 280 - Kit 305 - Kit 309 - Kit 384 - Kit 389 - Kit 405


StANDArD

PrOCeSSOr

SYNerGiC

accessorIesWelding torch, selfdarkening mask, pulley and other on page 16-19.

UsaGeMachines are designed for production in medium-hea-vy or heavy engineering, maintenance plants, metal-working industry, locksmi-thery or utility rooms.

with up to 160 welding parameters.Machines are delivered in versions STANDARD, PROCESSOR and SYNERGIC.

des

IGn

co

ntr

ol

pan

el sta

nd

ar

dsy

ner

GIc

pro

cess

or

des

IGn

co

ntr

ol

pan

el

StANDArD

PrOCeSSOr

SYNerGiC

machInes synerGIc: Simple storage of parameters of a wire speed shift programme by pressing buttons SYN and MEM (Gas Test). New parameters can be repeatedly re-writ-ten. Return to original values is carried out by pressing buttons SYN and ERASE (wire threading). New rewritten para-meters are always exhibit after switch - over to new position.

Function LOGIC: Displaying parameters during the wel-ding with wire speed shift regulation of a potenciometer or buttons on the torch. Control SETTING informs you about spe-ed shift in m/min.

Function LOGIC:Displaying values of welding current and welding voltage.

13

STANDARD EQUIPMENT

STANDARD EQUIPMENT

descrIptIonProfessional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire shift with a high-powered motor, a EURO connector and high-powered electronics.The main advantages are excellent welding capabilities, 40-grade voltage control, high power, high load factors, high reliability and very easy operating of versions Processor and Synergic.Machines are delivered in versions STANDARD, PROCESSOR and SYNERGIC

UsaGeMachines are designed for medium and heavy-ma-chinery production, maintenance plants, metal-production or for locksmiths.

Kit 400S/400WS - Kit 500S/500WS - Kit 600WS

descrIptIonProfessional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire shift with a high-powered motor, a EURO connector and high-powered electronics.The main advantages are excellent welding capa-bilities, 20-grade or 40-grade voltage control, high power, high load factors, high reliability and very easy operating of versions Processor and Synergic.

Machines are delivered in versions STANDARD, PROCESSOR and SYNERGIC

UsaGeMachines are designed for medium and heavy-ma-chinery production, maintenance plants, metal-production, for locksmiths or utility rooms.

Kit 305S - Kit 405S

MiG/MAG welding machines with a removable feed for heavy-machinery production

StANDArD

PrOCeSSOr

SYNerGiC

StANDArD

PrOCeSSOr

SYNerGiC

sta

nd

ar

dso

Ur

ceW

Ire

feed

erpr

oc.

+ s

yn.

soU

rce

des

IGn

co

ntr

ol

pan

el

Stated order numbers are for single source only. For assem-bling complete and functional welding machine is necessary to order connecting cable (page 19) and wire feeder (page 15).

sta

nd

ar

dso

Ur

cepr

oc.

+ s

yn.

soU

rce

des

IGn

co

ntr

ol

pan

el

eqUIpment for machInes WIth a remova-ble feederConnecting cables, welding torch, self-darkening mask and others on page 16-19.

dIGItal operatInG UnIts processor and synerGIc offer: MACHINES KIT 305S - 600WSVery easy and well-arranged operating of KIt® ma-chines with a possibility of adjusting all parameters needed for MIG/MAG welding. One of their main advantages is accurate regulati-on of wire speed shift in m/min by 0,1 m/min with feedback. The regulation of wire speed shift - solved in such a way - offers precise adjustment of requi-red parameters and thus it contributes to reaching excellent welding results.Two well-arranged displays show all adjusted and measured parameters such as speed of wire shift in

GUSAG - SWING SPRING LOADED

ARM OF THE TORCH

eqUIpment for machInes WIth a remova-ble feederConnecting cables, welding torch, self-darkening mask, gusag (swing springloaded arm of the torch)

and others on page 16-19.

KIT 600WS WITH GUSAG

(2 m)

Stated order numbers are for single source only. For assembling complete and functional welding machine is necessary to order con-necting cable (page 19) and wire feeder (page 15).

VERSIONS OF DELIVERED WIRE FEEDERS FOR MACHINES KIT 305S, KIT 405S, KIT 400S/400WS, KIT 500S/500WS AND KIT 600WS

m/min, as of gas foreblow and gas after-blow, as of burning out and so on. During welding process the welding parameters (voltage and welding current) are shown on the displays and stored in the memo-ry with a possibility of their back recalling.Type SYNERGIC, in addition, very simplifies ad-justing of welding parameters. By easy adjusting the diameter of wire and used protective gas the staff determines type of welding programme. Fur-ther the staff sets current by switch and SYNERGIC choses the best feed speed of wire. Machines SYN-ERGIC also enables saving welding parameters and own programming.Kit 2-2/4eKit 2-2/4P Kit 2-2/4e PrOCeSSOr

14

WIr

e fe

eder

MiG/MAG welding machines with a removable feed for heavy-machinery production

KIT 2-2/4 P/E (W)KIT 2-2/4 in variant E - with plastic wire coil cover. It is small, reliable and light wire feeder with inte-grated control panel for griping of all function of machine. Full equiped variant.

KIT 2-2/4 in variant P - with all-metal cover of the wire feeder and the wire coil. The wire feeder is small, reliable and light. However, the machine is of robust construction and therefore it is intended for heavy load operations. The wire feeder KIT 2-2/4 P is fitted with all adjusting functions - full equipped variant.

Feeders KIT 2-2/4 P/E varianta W - prepared for in-stalation of water cooled torch.

Kit 2-2/4 P/e (W) - Kit 3-2/4W - Kit 4-4 - Kit 5-2 - K 315W

Wire feeders and water cooling for engineering productions

KIT 5-2KIT 5-2 is intended for the PUSH PULL systems.

KIT 3-2/4WKIT 3-2 and KIT 3-4 (W) are the wire feeder with integrated high-performance water cooling of the welding torch. The machines are of robust and reli-able design and are fully equipped. They are inten-ded for refit of the older and newer machines.

KIT 4-4KIT 4-4 are wire feeder units with possible usage of the wire spool up to 32 kg. The wire feeder has independent power supply 24/110/230 V. Further, the machines may be fitted with high-power wel-

KIT 2-2P KIT 2-2E KIT 2-4P KIT 2-4E KIT 3-2W KIT 3-4W KIT 4-4 KIT 5-2 K 315W


5002550564

-

5043950565

-

500245056650923

5007750567

-

50039--

50034--

5002250398

-

50035--

Code 50004

Power supply 50/60 Hz V 24 24 24 24 48 48 24/110/230 24 Power supply 50/60 Hz V 230

Protection - slow A 10 10 10 10 10 10 10/1,5/0,7 10 Protection - slow A 6,3

Welding current range A 30-700 30-700 30-700 30-700 30-700 30-700 30-700 30-700 Welding current range A -

Wire feed 2-roll 2-roll 2-roll 4-roll 2-roll 4-roll 4-roll 2-roll Cooling power W 850

Wire feed speed m/min 1-25 m/min - variant STANDARD, 0,5-20 m/min variants PROCESSOR and SYNERGIC 1-20 Max. pressure MPa 0,4


0,6-1,6-

1,0-2,4

0,6-1,6-

1,0-2,4

0,6-1,60,8-1,61,0-2,4

0,6-1,60,8-1,61,0-2,4

0,6-1,6-

1,0-2,4

0,8-1,60,8-1,61,0-2,4

0,6-2,80,8-1,61,0-2,4

0,6-1,2--

Protection degree IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 IP 21 Protection degree IP 21

Standards ISO/IEC 60974-1, EN 50199 Standards ISO/IEC 60974-1, EN 50199

Dimensions mm 666x350x460 666x350x460 666x350x460 666x350x460 665x445x556 665x445x556 665x445x666 200x190x140 Dimensions mm 449x334x224

Weight kg 19 19 19 19 34 34 21 5,5 Weight kg 18

Kit 2-2/4eKit 2-2/4P

Kit 3-2/4W

Kit 4-4PrOCeSSOr

K 315 WWATER COOLING

Kit 5-2PUSH - PULL

Kit 2-2/4ePrOCeSSOr

Coil holder for tube wire 32 kg code 10097

KIT 2-2/4 P (W) WITH PRACTICAL BOx FOR SPARE PARTS

K 315WK 315W is light and compact water cooling of the welding burner. It is equipped with the main switch and pressure switch for indication of the cooling fluid.

WIre feed WIth analoGUe control standard• Easy and reliable control of welding parame-

ters.• Adjustable functions gas fore-blow/after-blow,

wire let-out and burning.• Control with feedback.• Functions of the wire introduction and gas test,

4-stroke/2-stroke, point welding and pulsing.

WIre feed WIth dIGItal control processor• Equal regulation of wire shift from 0,5 to 20 m/

min with fine control after 0,1m/min• Digital indicator of the wire feed speed • The connector of the remote control UP/

DOWN. A possibility of connecting the remote control in the torch handle

• Digital voltammeter with memory - functions HOLD

• Function EASY USE - secures easy and well-arranged operatingí.

• Function RESTORE PROGRAM - a simple and

ding current source. The wire feeder KIT 4-4 modi-fied by such manner may be used for the welding current sources with permanent voltage on the out-put terminals. The KIT 4-4 machines are normally delivered in full equipment.

fast come-back into all parameters of the initial setting - pre-configurated from the production.

• It enables adjustment of time values of counter blow/final blow of gas, wire residual burning.

• Function SOFT START - soft start of the welding process. This function enables time setting of wire speed start.

• Functions of the wire introduction and gas test, 4-stroke/2-stroke, point welding and pulsing.

WIre feed WIth synerGIc control• The same equipment as Processor.• Function SYNERGIC - automatic adjust-ment of

welding parameters.• Standard equipment up to 8 programmes for

common steels (2 type of gas and 6 Ø of wire).• A possibility of programme correction of

Synergic machine.• A possibility of simple recording of your own

programmes.

15

ROLL Ø 22/40 FOR WIRE FEED CWF 300

code type of roll Ø WIre30348 Roll Ø 22/40 0,6-0,831330 Roll Ø 22/40 0,8-1,031331 Roll Ø 22/40 1,0-1,232173 Roll Ø 22/40 1,2-1,432174 Roll Ø 22/40 1,4-1,632004 Roll Al Ø 22/40 0,8-1,031893 Roll Al Ø 22/40 1,0-1,232175 Roll Al Ø 22/40 1,2-1,432176 Roll Al Ø 22/40 1,4-1,632106 Roll tube wire Ø 22/40 0,8-1,032122 Roll tube wire Ø 22/40 1,0-1,232177 Roll tube wire Ø 22/40 1,4-1,632149 Roll tube wire Ø 22/40 1,6-2,432128 Roll tube wire Ø 22/40 2,0-2,432179 Roll tube wire Ø 22/40 2,4-2,8

Al

Fe

Tube wire

code type of roll Ø WIre30347 Roll Ø 32/40 0,6-0,831328 Roll Ø 32/40 0,8-1,031329 Roll Ø 32/40 1,0-1,232039 Roll Ø 32/40 1,2-1,432278 Roll Ø 32/40 1,2-1,632159 Roll Ø 32/40 1,4-1,631871 Roll Al Ø 32/40 0,8-1,031872 Roll Al Ø 32/40 1,0-1,232160 Roll Al Ø 32/40 1,2-1,431870 Roll Al Ø 32/40 1,2-1,632091 Roll tube wire Ø 32/40 1,0-1,232265 Roll tube wire Ø 32/40 1,2-1,632147 Roll tube wire Ø 32/40 1,4-1,632161 Roll tube wire Ø 32/40 1,6-2,432040 Roll tube wire Ø 32/40 2,0-2,432104 Roll tube wire Ø 32/40 2,4-2,832162 Roll tube wire Ø 32/40 2,8-3,2

code type of roll Ø WIre32002 Roll Ø 22/30 0,6-0,831340 Roll Ø 22/30 0,8-1,031840 Roll Ø 22/30 1,0-1,232282 Roll Ø 22/30 1,2-1,631868 Roll Al Ø 22/30 1,0-1,231867 Roll Al Ø 22/30 1,0-1,831689 Roll Al Ø 22/30 1,2-1,632307 Roll tube wire Ø 22/30 1,0-1,232147 Roll tube wire Ø 22/30 1,4-1,632161 Roll tube wire Ø 22/30 1,6-2,432040 Roll tube wire Ø 22/30 2,0-2,4

Typical use of these rolls: KIT 155 - KIT 245

and KITin 220-320MIG*

* Before you order make sure that both dimensions of the pulley are in compliance with your original pulley.

Typical use of these rolls: KIT 250 - KIT 600*

Typical use of these rolls: KIT 250 - KIT 405

and KITin 220-320 MIG*

ROLL Ø 32/40 FOR WIRE FEEDER CWF 510, CWF 610

ROLL Ø 22/30 FOR WIRE FEED CWF 410

CWF 510code 30472

CWF 401code 30998

CWF 300code 30997

CWF 610code 30471

WIre feeder

basIc spare parts of IndIvIdUal shIftsshift plate a screw of the clamping rolls a cover of the cogged wheel thrust of pulleys+the scale a lead-in cable plastic

code code code code codeCWF 300 000780023 000780056 - 000780048 000780058CWF 610 000780024 000780046 - 000780013 000780020CWF 410 000780065 000780056 000780066 000780067 000780058CWF 510 000780026 000780001 000780039 000780035 000780020

MOTORsmall - code 30362big - code 30460

COIL HOLDERcode 30009

COIL HOLDERcode 30096

STRETCHER OF WIREWS3-3-roll - code 000780029WS5-5-roll - code 000780030

COIL REDUCTIONcode 32288

COIL HOLDER FOR TUBE WIRE WR4 - 32 kg

code 32287

A complete list of spare parts of wire shifts can be asked for at your supplier.

rolls wire feeder CWF - machines Kühtreiber®

equipment and spare parts

Al

Fe

Tube wire

Al

Fe

Tube wire

16

CWF 410 (for KITin MIG)code 32314

22,0

40,0

40,0

32,030,0

22,0


Welding torch MiG/MAG


The torch MIG/MAG is delivered with the bought machine KIT for an endowed price, the details of endowed prices in the pricelist.

TORCH WITH UP-DOWN

MIG PLIERS KÜHTREIBER

code - 014220001ANTISTICK

SPRAY BINZELSPARE PARTS

KÜhtreIber® KÜhtreIber® UP-DOWN abIcor bInZelcode WeldInG torch Dz 60% MIx code WeldInG torch Dz 60% MIx code WeldInG torch Dz 60% MIx

AIR COOLED TORCHES

3M01501003101 KTR 15 Mig 3 m 150 A 3M01581003101 KTR 15 Mig up-down 3 m 150 A 002.0449 MB 15AK ERGO 3 m 150 A3M01501004101 KTR 15 Mig 4 m 150 A 3M01581004101 KTR 15 Mig up-down 4 m 150 A 002.0450 MB 15AK ERGO 4 m 150 A3M01501005101 KTR 15 Mig 5 m 150 A 3M01581005101 KTR 15 Mig up-down 5 m 150 A 002.0451 MB 15AK ERGO 5 m 150 A

3M02401003101 KTR 24 Mig 3 m 220 A 3M02481003101 KTR 24 Mig up-down 3 m 220 A 012.0103 MB 24KD ERGO 3 m 220 A3M02401004101 KTR 24 Mig 4 m 220 A 3M02481004101 KTR 24 Mig up-down 4 m 220 A 012.0104 MB 24KD ERGO 4 m 220 A3M02401005101 KTR 24 Mig 5 m 220 A 3M02481005101 KTR 24 Mig up-down 5 m 220 A 012.0105 MB 24KD ERGO 5 m 220 A

3M02501003101 KTR 25 Mig 3 m 200 A 3M02581003101 KTR 25 Mig up-down 3 m 200 A 004.0312 MB 25AK ERGO 3 m 200 A3M02501004101 KTR 25 Mig 4 m 200 A 3M02581004101 KTR 25 Mig up-down 4 m 200 A 004.0313 MB 25AK ERGO 4 m 200 A 3M02501005101 KTR 25 Mig 5 m 200 A 3M02581005101 KTR 25 Mig up-down 5 m 200 A 004.0314 MB 25AK ERGO 5 m 200 A

3M03601003101 KTR 36 Mig 3 m 300 A 3M03681003101 KTR 36 Mig up-down 3 m 300 A 014.0143 MB 36KD ERGO 3 m 270 A3M03601004101 KTR 36 Mig 4 m 300 A 3M03681004101 KTR 36 Mig up-down 4 m 300 A 014.0144 MB 36KD ERGO 4 m 270 A3M03601005101 KTR 36 Mig 5 m 300 A 3M03681005101 KTR 36 Mig up-down 5 m 300 A 014.0145 MB 36KD ERGO 5 m 270 A

WATER COOLED TORCHES

3M40103003101 KTR 410 Mig 3 m 450 A 3M40183003101 KTR 410 Mig up-down 3 m 450 A 033.0107 MB 401D ERGO 3 m 350 A3M40103004101 KTR 410 Mig 4 m 450 A 3M40183004101 KTR 410 Mig up-down 4 m 450 A 033.0108 MB 401D ERGO 4 m 350 A3M40103005101 KTR 410 Mig 5 m 450 A 3M40183005101 KTR 410 Mig up-down 5 m 450 A 033.0109 MB 401D ERGO 5 m 350 A

3M50103003101 KTR 510 Mig 3 m 500 A 3M50183003101 KTR 510 Mig up-down 3 m 500 A 034.0160 MB 501D ERGO 3 m 450 A3M50103004101 KTR 510 Mig 4 m 500 A 3M50183004101 KTR 510 Mig up-down 4 m 500 A 034.0161 MB 501D ERGO 4 m 450 A3M50103005101 KTR 510 Mig 5 m 500 A 3M50183005101 KTR 510 Mig up-down 5 m 500 A 034.0162 MB 501D ERGO 5 m 450 A

6225033 KTR AUTO-25 3m (90°) 766.1013 ABIMIG 535W 3 m 500 A6235033 KTR AUTO-36 3m (90°) 766.1014 ABIMIG 535W 4 m 500 A6250033 KTR AUTO-501 3m (90°) 766.1015 ABIMIG 535W 5 m 500 A

PUSH-PULL

• HOLDER OF WELDING TORCH FOR MACHINES KIT 205-600WS

• STANDARD EQUIPMENT FOR MACHINES KIT 205-245 AND KIT 305

17

Welding torch tiG/WiG


KÜhtreIber® KÜhtreIber® UP-DOWN abIcor bInZelcode WeldInG torch code WeldInG torch code WeldInG torch Dz 60% MIx

AIR COOLED TORCHES

T6003504400K SR 9V leather 10-25 4 m - 706.5057 SRT 9V 10-25 4 m 125 AT01353504400K SR 9LA-V leather 10-25 4 m - - 125 AT0235304400K SR 9LA-V Fx leather 10-25 4 m - - 125 A

T01013504540 SR-9 leather 35-50 4 m T01033504540 SR-9 UD leather 35-50 4 m 7S1SK043020000006 ABITIG 9 35-50 4 m 125 AT02013504540 SR-9Fx leather 35-50 4 m T02033504540 SR-9Fx UD leather 35-50 4 m 7S1FK043020000006 ABITIG 9Fx 35-50 4 m 125 AT01013508540 SR-9 leather 35-50 8 m T01033508540 SR-9 UD leather 35-50 8 m 7S1SK083020000006 ABITIG 9 35-50 8 m 125 AT02013508540 SR-9Fx leather 35-50 8 m T02033508540 SR-9Fx UD leather 35-50 8 m 7S1FK083020000006 ABITIG 9Fx 35-50 8 m 125 A

T25003504400K SR 17V leather 10-25 4 m - 706.1057 SRT 17V 10-25 4 m 150 AT20003504400K SR 17LA-V leather 10-25 4 m - - 150 AT21353504400K SR 17LA-V Fx leather 10-25 4 m - - 150 A

T20013504540 SR-17 leather 35-50 4 m T20033504540 SR-17 UD leather 35-50 4 m 7S2SH043020000006 ABITIG 17 35-50 4 m 150 AT21013504540 SR-17Fx leather 35-50 4 m T21033504540 SR-17Fx UD leather 35-50 4 m 7S2FK043020000006 ABITIG 17Fx 35-50 4 m 150 AT20013508540 SR-17 leather 35-50 8 m T20033508540 SR-17 UD leather 35-50 8 m 7S2SK083020000006 ABITIG 17 35-50 4 m 150 AT21013508540 SR-17Fx leather 35-50 8 m T21033508540 SR-17Fx UD leather 35-50 8 m 7S2FK083020000006 ABITIG 17Fx 35-50 4 m 150 A

T50013504540 SR-24 leather 35-50 4 m T50033504540K SR-24 UD leather 35-50 4 m 7S8SK043020000006 ABITIG 24G 35-50 4 m 80 A

WATER COOLED TORCHES




T54014004680 SR-24W leather 35-50 4 m T54034004680K SR-24W UD leather 35-50 4 m 7S9SK043020000020 ABITIG 24W 35-50 4 m 210 A

COLD WIRE SYSTEM

501050 system for SR-9/20501060 system for SR-17/18/26

tUnGsten electrodes

torch WIth flexIble necK

V = valveFX = flexy neck

TORCH WITH BUTTON AND UP-DOWNtorch WIth

valve

UD = remote control UP- DOWNW = water cooled torch

spare parts

18


Self-darkening welding mask


code other eqUIpment code pressUre control valve code connectInG cables code cables In footaGe code staInless steel scale KÜhtreIber10634 Gusag 2 m - swing arm of the torch 07-806.47 Control valve CO₂ GCE 10482 Connecting cable 2 m / 95 mm� 30023 Cable Ø 16 mm 014220003 Scale of corners weld9037 Reducer ARGON - CO₂ 07-806.31 Control valve Ar GCE 10484 Connecting cable 5 m / 95 mm� 30024 Cable Ø 25 mm 014220002 Universal scale weld with goniometer7108 Gas bottle 2 l 200 Bar 07-830.54 Control valve CO₂ KU5 24V with heating 10486 Connecting cable 10 m / 95 mm� 30025 Cable Ø 35 mm014220004 Holder for talcum + 1x talcum 07-830.55 Control valve CO₂ KU5 42 with heating 10488 Connecting cable 15 m / 95 mm� 30026 Cable Ø 50 mm13010026 Set rasper 01.25.0001 Control valve CO₂ Harris 10483 Connecting cable 2 m / 95 mm� W 30027 Cable Ø 70 mm

01.25 Control valve Argon Harris 10485 Connecting cable 5 m / 95 mm� W 30028 Cable Ø 95 mm25590 Control valve Ar Micro MEI 2 manometer 10487 Connecting cable 10 m / 95 mm� W25500 Control valve Ar MEI 2 manometer 10489 Connecting cable 15 m / 95 mm� W

PRESSURE CONTROL VALVE AR MICRO

CONNECTING CABLES MIG/MAGPOWER SOURCE - WIRE FEED

PRESSURE CONTROL VALVE GCE

PRESSURE CONTROL VALVE AR MEI CABLES

PRESSURE CONTROL VALVE KU5

HOLDER FOR TALCUM

SCALE OF CORNERS WELD

SET RASPER

code type of masK SIzE OF A PEEP-HOLE fIlter darKness dUrInG darKenInG the speed of darKenInG the sUpply WeIGht401880 Welding mask SPEEDGLAS 90002x 9-13 107x55 mm DIN 9-13 0,1 ms solar panels + lithium battery 493 g1000.153 Welding mask OPTREL OSE SATELITE 9-13 98x50 mm DIN 9-13 0,3 ms solar battery 600 g414 Welding mask CHAMELEON II. W2000V 97x47 mm DIN 9-13 0,5 ms exchangeable lithium battery CR-2450 supported by solar units 430 g005850001 Welding mask KÜHTREIBER® 700S black 96x47 mm DIN 9-13 0,4 ms solar panels 430 g005850003 Welding mask KÜHTREIBER® 700S blue 96x47 mm DIN 9-13 0,4 ms solar panels 430 g005850004 Welding mask KÜHTREIBER® 700S silver 96x47 mm DIN 9-13 0,4 ms solar panels 430 g

WELDING MASK CHAMELEONWELDING MASK SPEEDGLAS

SELF-DARKENING CARTRIDGE

FOIL 700S

Other equipment

GAS BOTTLE2 litres

GUSAG - SWING SPRING-LOADED ARM OF THE

TORCH (LENGTH OF THE ARM ACCORDING TO

YOUR WISH, STANDARDLY 1,5 m AND 2 m)

19

WELDING MASK KÜHTREIBER® 700S

UNIVERSAL SCALE WELD WITH GONIOMETER

www.kuhtreiber.cz

Kühtreiberkühtreiber

. . . welding for everyone . . .

welding machine manufacturer

the producer reserves the right to modification. Catalogue Kühtreiber is valid from the 1st April 2010.

Kuhtreiber Catalogue EN 2010

Documents

production of welding

service partners

sales service

quarantee service

reliability of machines

czech republic

service background

service documentation