Tail Tidy KTM 790 Duke Installation Instructions
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Tail TidyKTM 790 Duke
Installation Instructions
Installation Instructions
Kit Contents PRN014017
1 x Re�ector Kit A
1 x Loom Connector B
2 x Rubber Grommets C
2 x 4mm Dowel Pins D
2 x M5 x 16mm CapheadsE
3 x Male Bullet ConnectorsF
4 x M6 x 16mm Capheads G
1Installation Instructions
2Installation Instructions
3Installation Instructions
4Installation Instructions
5Installation Instructions
6Installation Instructions
RepeatBoth Sides
7Installation Instructions
RepeatBoth Sides
8Installation Instructions
RepeatBoth Sides
9Installation Instructions
RepeatBoth Sides
10Installation Instructions
OEM PART
RepeatBoth Sides
11Installation Instructions
C
C
12Installation Instructions
FF F
13Installation Instructions
14Installation Instructions
Caution
Do Not Fully TightenOnly Rotate 6 Full
Turns
15Installation Instructions
16Installation Instructions
E
17Installation Instructions
18Installation Instructions
D
D
Caution
Run wires neatly down the channelin both parts ensuring they
do not get trapped or squashed
19Installation Instructions
Caution
Run wires neatly down the channelin both parts ensuring they
do not get trapped or squashed
20Installation Instructions
E
21Installation Instructions
22Installation Instructions
23Installation Instructions
24Installation Instructions
G
G
G
G
25Installation Instructions
B
26Installation Instructions
LoomSide
LightSide
27Installation Instructions
28Installation Instructions
Caution
Locate loom in underseat area ensuring they do not
get trapped or squashed
29Installation Instructions
Installation Instructions
After installation of your tail tidy ensure that the licence plate does not contact the rear tyre when
suspension is fully compressed.Ensure all electrics including indicators, tail light, brake light
and licence plate light lights are working correctly before riding the motorcycle.
It is recommended that periodic inspections are made to ensure that all �xings are fully tightend.
Installation Instructions
Installation Instructions
www.evotech-performance.com
Related Documents
