Kramer TBUS-1N User Manual - lewelectric.com

USER MANUAL

MODEL:

TBUS-1N Table Connection Bus

P/N: 2900-300656 Rev 3 www.kramerAV.com

http://www.kramerav.com/

TBUS-1N – Contents i

Contents

1 Introduction 1

2 Getting Started 2

2.1 Achieving the Best Performance 22.2 Recycling Kramer Products 3

3 Overview 4

4 Defining the TBUS-1N 5

4.1 TBUS-1N Optional Inner Frames 64.2 TBUS-1N Accessories 74.3 Power Socket Options 84.4 Power Cord Options 11

5 Installing the TBUS-1N 12

5.1 Assembling the Inner Frame 125.2 Installing the Inner Frame 175.3 Cutting an Opening in the Table 175.4 Inserting the TBUS-1N through the Cut Out Opening 185.5 Connecting the Cables 195.6 Inserting the Pass-through Cables 195.7 Adjusting the Height of the Inner Frame 20

6 Using the TBUS-1N 21

7 Technical Specifications of the TBUS-1N 22

45

1314151516181920

Figures

Figure 1: TBUS-1N inside Table Figure 2: TBUS-1N Table Connection Bus – Front View Figure 3: TBUS-1N Inner Frame (P/N: 80-000299) Figure 4: Installing a Kramer TOOL Figure 5: Installing the T-TBLANK TOOL Blank Figure 6: T-RC8IR (P/N: 80-000599) Figure 7: RC-8IR Faceplate Holes Table Connection Bus Figure 8: Cut Out Dimensions Figure 9: Inserting TBUS-1N into the Prepared Opening Figure 10: Cable Pass-through Insert (P/N: 80-000499) Figure 11: TBUS-1N Boardroom Installation 21

TBUS-1N - Introduction 1

1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined by

function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:

Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and

GROUP 14: Collaboration.

Thank you for purchasing the Kramer TBUS-1N Table Connection Bus which is

ideal for boardrooms, conference and training rooms!

Note that the inner frame, power socket assembly, power cord and other

inserts for the TBUS-1N enclosure are purchased separately.

2 TBUS-1N - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment.

Review the contents of this user manual.

Use Kramer high-performance high-resolution cables

Go to www.kramerav.com/downloads/TBUS-1N to check for up-to-date

user manuals and a complete list of Kramer wall plates and module.

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables).

Do not secure the cables in tight bundles or roll the slack into tight coils.

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality.

Position your Kramer TBUS-1N away from moisture, excessive sunlight and

dust.

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

Do not place heavy objects on top of the TBUS-1N.

http://www.kramerav.com/downloads/TBUS-1N

TBUS-1N - Getting Started 3

3

2.2 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims

to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country go

to our recycling pages at www.kramerav.com/support/recycling/.

http://www.kramerav.com/support/recycling/

4 TBUS-1N - Overview

3 Overview

The TBUS-1N is a modular furniture-mounted connection bus enclosure that is

easily installed into a table or podium top. Once assembled, the TBUS-1N lets you

connect any equipment to the room’s presentation system installations via cable

access or passive interfaces (see Figure 1). When the cables are not in use, they

can be stored inside the unit, covered by the lid and out of sight.

In addition, the TBUS-1N features:

A modular design, letting you tailor the TBUS-1N according to your

requirements

A black anodized or brushed clear aluminium lid with a special opening for

cable pass-through, (note that other customized colors can also be ordered)

Height adjustment screw holes to set the inner frame (ordered separately) to

the desired height

Single or dual power socket openings that are suitable for any of the following

power sockets: for the USA, the UK, Switzerland, Germany (the Europlug),

Belgium-France, Italy, Australia, Israel, Brazil, South Africa or “Universal” for

use anywhere (see compatibility restrictions in Section ‎7).

Order the power sockets separately from Kramer Electronics

The TBUS-1N cover opens and closes manually. When open, the cover retracts

into the unit to remain out of sight when the TBUS-1N is in use. When closed, all

the cables and connectors are out of sight under the anodized cover.

Figure 1: TBUS-1N inside Table

Do not place heavy objects on top of the TBUS-1N. !

TBUS-1N - Defining the TBUS-1N 5

5

4 Defining the TBUS-1N

This section defines the TBUS-1N.

Figure 2: TBUS-1N Table Connection Bus – Front View

# Feature Function

1 Black/Clear Anodized Sandblast Textured Lid

Includes an opening for cable pass-through; covers the inner frame, leaving the table surface neat and tidy.

When lid is open, retracts into the unit to remain out of sight.

2 Outer Rim Fits over the table surface.

A protective rubber guard protects the outer rim during shipping. Remove it before installing the unit.

3 Enclosure Inserted into the table cut out.

4 Tie Holes Insert the self-locking tie through the holes to fix the pass-through cables to the inside walls of the unit.

5 TOOL Height Adjustment Screw Holes

Used for installing Kramer TOOLs.

6 TBUS-1N - Defining the TBUS-1N

# Feature Function

6

Ta

ble

Cla

mpin

g S

et

Mounting Brackets (2 units)

Place in the bracket slits after inserting the enclosure into the table – for securing the unit to the table surface (one for each clamp).

7 Mounting Butterfly Screws

Tighten to secure the unit to the table surface (one for each clamp).

8 Locking Butterfly Screws

Tighten to lock the mounting butterfly screw (one for each clamp).

9 Rubber Protectors Protect the table surface when mounting the unit and ensure soft tightening to the table underside (one for each clamp).

10 Inner Frame Height Adjustment Screw Holes

For adjusting the height of the mounted inner frame.

4.1 TBUS-1N Optional Inner Frames

The following inner frames can be installed in the TBUS-1N enclosure:

Inner Frames for TBUS-1N Specifications

T1AF-16 (P/N: 80-000299)

1 opening for 1 power socket

2 cable pass-through inserts

4 blank inserts

T1AF-26 (P/N: 80-000399)

1 opening for 2 power sockets


4 blank inserts

T1AF-44 (P/N: 80-000499)

2 openings for 4 power sockets


2 blank inserts


7

Inner Frames for TBUS-1N Specifications

T1AF-14L (P/N: 80-000699)


1 opening for Kramer SI-1VGA / RC-3TB


2 blank inserts

T1AF-1T3 (P/N: 80-005199)


2 openings for 3 Kramer TOOLs

T1AF-14T (P/N: 80-005299)


1 opening for 1 Kramer TOOL


2 blank inserts

Custom made inner frames can be designed if required.

Contact Kramer Electronics for more details.

4.2 TBUS-1N Accessories

Accessories Description

Inserts You can install any wall plate devices as well as any of the single or dual inserts—see our Web site for details.

T-RC8IR (P/N: 80-000599)

1 special panel to fit the Kramer RC-8IR Control Panel into the appropriate frame (P/N 80-000399 or P/N 80-000499 instead of two power sockets)


Accessories Description

T-4INSERT (P/N: 60-100199)

The T-4INSERT kit can be installed inside a dual power socket opening and includes:

2 single cable pass-through insert

2 dual cable pass-through insert

T-2INSERT (P/N: 80-00006699)

The T-2INSERT kit can be installed inside a single power socket opening and includes:

1 single cable pass-through insert

1 dual cable pass-through insert

T-TBLANK (P/N: 80-005099)

This TOOL blank covers a TOOL opening for the T1AF-1T3 (P/N: 80-005199) and T1AF-14T (P/N: 80-005299) inner frames

4.3 Power Socket Options

Inner frames support installing one or more of the following power socket assemblies.

Note: The Brazilian power sockets are supplied as dual power sockets in a single

power socket assembly (see table below).

4.3.1 Single Power Socket Assemblies

Power Socket Type

Power Specs Power Socket Type

Power Specs

Universal:

TS-1U (80-000899)

100-240V AC, 50/60Hz, 5A

Maximum 5A per power outlet

Fully compatible with power plugs in the UK, India, Italy and Denmark, as well as with the 2-prong Europlug.

Partially compatible (if the polarity is

reversed) with plugs in China, Switzerland, Israel and the USA. The universal socket does not supply grounding to plugs in Central Europe and France and so you should order country specific sockets instead.

Not compatible with South African plugs.

Power Socket Type


Power Specs

USA:

TS-1US (80-000999)

100-240V AC, 50/60Hz, 5A


UK

TS-1UK (91-000022)

100-240V AC, 50/60Hz, 5A



9

Power Socket Type


Power Specs

Belgium and France:

TS-1FR (80-001399)

100-240V AC, 50/60Hz, 5A


Israel:

TS-1IL (80-001799)

220V AC, 50/60Hz, 5A


Germany and EU:

TS-1DE (80-001299)

100-240V AC, 50/60Hz, 5A


South Africa

TS-1ZA (80-001699)

100-240V AC, 50/60Hz, 5A


Italy:

TS-1IT (80-001499)

100-240V AC, 50/60Hz, 5A


Australia:

TS-1AU (80-001599)

100-240V AC, 50/60Hz, 5A


Switzerland

TS-1CH (80-000027)

100-240V AC, 50/60Hz, 5A


Brazil

TS-BR (80-000034)

100-240V AC, 50/60Hz, 5A

Maximum 5A/2.5A per power outlet


4.3.2 Dual Power Socket Assemblies

Dual Power Socket Assemblies: Power Specs

Universal:

TS-2U (80-001899)

100-240V AC, 50/60Hz, 5A


USA:

TS-2US (80-001999)

100-240V AC, 50/60Hz, 5A


Belgium and France:

TS-2FR (80-002299)

100-240V AC, 50/60Hz, 5A


Germany and EU:

TS-2DE (80-002199)

100-240V AC, 50/60Hz, 5A


Italy

TS-2IT (80-002399)

100-240V AC, 50/60Hz, 5A


Switzerland

TS-2CH (80-000026)

220V AC, 50/60Hz, 5A


UK

TS-1UK (91-000023)

220V AC, 50/60Hz, 5A


Israel:

TS-2IL (80-002699)

220V AC, 50/60Hz, 5A


South Africa:

TS-2ZA (80-002599)

220V AC, 50/60Hz, 5A



11

Dual Power Socket Assemblies: Power Specs

Australia:

TS-2AU (80-002499)

100-240V AC, 50/60Hz, 5A


4.4 Power Cord Options

You can order any of the following power cords to use with a modular TBUS:

Power Cord Type Description P/N

6ft/110V (North America) C-AC/US (110V) 91-000099

6ft/125V (Japan) C-AC/JP (125V) 91-000699

6ft/220V (Europe) C-AC/EU (220V) 91-000199

6ft/220V (Israel) C-AC/IL (220V) 91-000999

6ft/250V (UK) C-AC/UK (250V) 91-000299

6ft/250V (India) C-AC/IN (250V) 91-001099

6ft/250V/10A (China) C-AC/CN (250V) 91-001199

6ft/250V/10A (South Africa) C-AC/ZA (250V) 91-001299

To use one power cord for a 4-socket configuration, you can order any of the

following types of power cords separately:

Power Cord Type Description P/N

110V Y-version (6ft), North America C-ACY/US 91-000399

220V Y-version (6ft), Europe C-ACY/EU 91-000499

240V Y-version (6ft), UK C-ACY/UK 91-000599

12 TBUS-1N - Installing the TBUS-1N

5 Installing the TBUS-1N

To install the TBUS-1N:

1. Assemble the inner frame (see Section ‎5.1).

2. Install the inner frame (see Section ‎5.2).

3. Cut an opening in the table (see Section ‎5.3).

4. Insert the unit through the opening and secure it to the table (see Section ‎5.4).

5. Connect the cables (see Section ‎5.5).

6. Insert the pass-through cables (see Section ‎5.6).

7. Adjust the height of the inner frame (see Section ‎5.7).

5.1 Assembling the Inner Frame

The modules mounted on the inner frame can include single inserts and/or dual

inserts as well as power sockets and various Kramer devices. This section

describes how to assemble these modules.

Each module kit is supplied with detailed assembly instructions.

5.1.1 Mounting the Inserts

You can rearrange or remove any of the plates mounted on the inner frame and

replace them with Kramer passive wall plates or connector modules for interfacing

A/V type signals.

To mount a Kramer insert or connector module:

1. Unscrew the two screws that fasten the blank plate to the inner frame and

remove the blank plate.

2. Place the required Kramer insert over the opening, insert the two screws to fix

the Kramer insert in place, and tighten them.

TBUS-1N - Installing the TBUS-1N 13

13

Figure 3: TBUS-1N Inner Frame (P/N: 80-000299)

# Feature Function

1 Split Brackets Support the split grommet for the pass through-cables.

2 Split Grommets Push apart slightly to insert cables.

3 Blank Plates Four blank covers that can be replaced with wall plates as required.

4 Power Socket Opening Suitable for a single power socket or the T-2INSERT.

5 Adjustable Height Screw Holes

For adjusting the height of the inner frame.

5.1.2 Mounting the Power Socket Assemblies

To mount the power socket, place the power socket under the frame in its

appropriate place and tighten with the two screws (supplied).

Power socket kits are supplied with assembly instructions.


5.1.3 Mounting a Kramer TOOL

To mount a TOOL (for example, to the T1AF-14T), as shown in Figure 4:

1. Screw the spacers to their designated places (one on each side).

2. Insert the TOOL, from beneath, through the TOOL opening.

3. Screw the screws (one on each side) through the frame holes and spacers.

Figure 4: Installing a Kramer TOOL

5.1.4 Installing the TOOL Blank

To install the T-TBLANK, as shown in Figure 5:

1. Insert the T-TBLANK from beneath, through the TOOL opening.

2. Screw the screws (one on each side) through the frame.


15

Figure 5: Installing the T-TBLANK TOOL Blank

5.1.5 Mounting the Special Panel for RC-8IR

The Kramer T-RC8IR for the TBUS-1N Table Connection bus is used to fit the

Kramer RC-8IR Control Panel into the appropriate frame (P/N 80-000399 or P/N

80-000499 instead of two power sockets).

Figure 6: T-RC8IR (P/N: 80-000599)


To replace the RC-8IR faceplate:

1. Unscrew the two faceplate attachment screws and remove the RC-8IR

faceplate before installing the T-RC8IR.

Figure 7: RC-8IR Faceplate Holes Table Connection Bus

2. Place the T-RC8IR over the RC-8IR enclosure so that both face plate holes

are aligned with the face plate holes on the RC-8IR enclosure and the IR IN

receiver fits into the IR IN opening.

3. Insert the faceplate screws through the T-RC8IR and RC-8IR enclosure

faceplate holes, and tighten.

To install the T-RC8IR:

1. Insert the T-RC8IR assembly through the dual power socket opening from

beneath.

2. Use the two power socket screws to tighten the T-RC8IR assembly in place.

5.1.6 Installing the SI-1VGA / RC-3TB

To install the SI-1VGA / RC-3TB module, place it under the designated opening in

the T1AF-14L (P/N: 80-000699) and then screw and tighten it in place using the

two screws supplied with the inner frame.


17

5.2 Installing the Inner Frame

To install the inner frame:

1. Place the inner frame inside the TBUS-1N enclosure.

2. Set the required height using your fingers to bring the inner frame to the

desired position, screw and tighten it in place using the height adjustment

screws (supplied with the inner frame).

Inner frame kits come with assembly instructions.

5.3 Cutting an Opening in the Table

To cut an opening in the table:

1. Place the included cut out template (that is included with your TBUS-1N) on

the surface of the table exactly where you want to install the TBUS-1N.

2. Attach the template to the table with the included screws (if using the cut out

template).

3. Following the inside edge of the template, cut a hole in the table surface with

a sabre or keyhole saw according to the dimensions shown in Figure 8 (not to

scale).

The thickness of the table should be 76 mm / 3 inches or less.


Figure 8: Cut Out Dimensions

4. Unscrew and remove the template from the surface of the table and clean the

table surface.

Take care not to damage the table.

If needed, you can download a full-scale template from our Web site.

Kramer Electronics is not responsible for any damage caused to the

table.

5.4 Inserting the TBUS-1N through the Cut Out Opening

To install TBUS-1N in the opening:

1. Remove the protective rubber guard from around the outer rim of the

TBUS-1N housing. Beware of the sharp edge!

2. Carefully insert the unit into the prepared opening (see Figure 9).

3. Take the support brackets under the table and place them into the support

bracket grooves on both sides of the unit (see Figure 2, item 6).

4. Verify proper alignment of the unit before tightening the mounting screws.

5. Tighten both mounting butterfly screws upward until they reach the table

surface (from underneath). Tighten firmly (see Figure 9).


19

6. Tighten the locking butterfly screws downward until tight against the mounting

bracket.

Figure 9: Inserting TBUS-1N into the Prepared Opening

5.5 Connecting the Cables

To connect the cables when replacing blank inserts with connector inserts

(for example, VGA, audio, HDMI and so on):

1. Insert the cables to their appropriate connectors from underneath.

2. Secure the cables to the tie holes on the TBUS-1N.

Do not secure the cables too tightly or too loosely. Leave a small amount of

slack.

5.6 Inserting the Pass-through Cables

To insert the pass through cables (for example, to connect a laptop):

1. Remove the two screws attaching the split pass-through bracket.

2. Remove the split grommet.

3. Insert the cable through the rectangular opening.

4. Open the split grommet slightly and insert the required cables.


5. Place the split bracket around the grommet and position this assembly over

the inner frame.

6. Place the two screws appropriately and tighten the split bracket together with

the grommet and inserted cables to the inner frame.

7. Insert the self-locking ties through the tie holes to secure the cables to the

inside walls of the enclosure.

Figure 10: Cable Pass-through Insert (P/N: 80-000499)

5.7 Adjusting the Height of the Inner Frame

If needed, you can adjust the inner frame height to accommodate large or bulky

cables.

To adjust the inner frame height:

1. Remove the height adjustment screws, while supporting the surface from

underneath with your fingers.

2. Raise or lower the inner frame to the required height, insert the screws, and

tighten them in place.

TBUS-1N - Using the TBUS-1N 21

21

6 Using the TBUS-1N

Once the TBUS-1N is installed, you can easily customize it to suit your own

requirements by plugging in the required A/V equipment, as illustrated in the

example in Figure 11.

Figure 11: TBUS-1N Boardroom Installation

22 TBUS-1N - Technical Specifications of the TBUS-1N

7 Technical Specifications of the TBUS-1N POWER SOURCE

(AC power limits):

Single Socket Assemblies:

Universal 100-240V AC, 50/60Hz, 5A


Fully compatible with power plugs in the UK, India, Italy and Denmark, as well as with the 2-prong Europlug.

Partially compatible (if the polarity is reversed) with plugs in China, Switzerland, Israel and the USA. The universal socket does not supply grounding to plugs in Central Europe and France (you should order country specific sockets instead).

Not compatible with South African plugs.

USA 100-240V AC, 50/60Hz, 5A


Germany and EU 100-240V AC, 50/60Hz, 5A


Belgium and France 100-240V AC, 50/60Hz, 5A


Italy 100-240V AC, 50/60Hz, 5A


Australia 100-240V AC, 50/60Hz, 5A


Israel 220V AC, 50/60Hz, 5A


South Africa 220V AC, 50/60Hz, 5A


Dual Power Kit Assemblies:

Universal 100-240V AC, 50/60Hz, 5A


USA 100-240V AC, 50/60Hz, 5A


Germany and EU 100-240V AC, 50/60Hz, 5A


France 100-240V AC, 50/60Hz, 5A


Israel 220V AC, 50/60Hz, 5A


South Africa 220V AC, 50/60Hz, 5A


FUSE RATING: T 6.3A 250V

OPERATING TEMPERATURE: 0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE: -40° to +70°C (-40° to 158°F)

HUMIDITY: 10% to 90%, RHL non-condensing

STORAGE HUMIDITY RANGE: 5 to 95% RHL, non-condensing

DIMENSIONS: 21.4cm x 19.2cm x 13.6cm (8.42" x 7.56" x 5.35") W, D, H.

WEIGHT: TBUS-1N: 2kg (4.4lbs) approx.; accessories (table clamps, metal

template and so on): 0.89kg (1.96lbs)

ACCESSORIES: Six self-locking ties, metal template

OPTIONS: Inner frames, passive wall plates and interfaces, power socket kits, power cord

Specifications are subject to change without notice at www.kramerav.com


SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors,

visit our Web site where updates to this user manual may be found.

We welcome your questions, comments, and feedback.

www.kramerAV.com [email protected]

P/N: 2900- 300656 Rev: 3


mailto:[email protected]

Kramer TBUS-1N User Manual - lewelectric.com

Documents