A high-quality, proven insulation system Designed and manufactured in Ireland PASSIVE SLAB INSULATED FOUNDATION SYSTEM WHAT IS THE PASSIVE SLAB? The Passive Slab is an Insulated Foundation System that works much like a raft foundation. The Passive Slab is designed to deliver the lowest U-value available on the market, eliminating the critical wall to floor cold bridge. Expanded Polystyrene is used to wrap the foundation of the building ensuring there is no thermal break between the wall and the foundation. The structural strength of the Passive Slab results from the combination of Expanded Polystyrene (EPS 300), concrete and steel. Typical loads for a two story house built with standard concrete block work are 4.5/5.5 tonnes per linear meter. The standard Cavity Wall KORE double L passive slab ringbeam is usually designed to take 7.2 tonnes per linear meter, and can be designed to take larger loads if necessary. KORE EPS will insulate for a lifetime The Green, Kilnaleck, Co. Cavan T +353 49 4336998 F +353 49 4336823 W www.kore-system.com E [email protected] Eliminate critical wall-floor Cold Bridging Reduce underfloor heating heat loss through rising walls from 65% to 12% Price is comparable with traditional strip foundation Concrete quantity is reduced by 50%, reducing the bill and carbon footprint Suitable for all ground conditions while easily accommodating the radon barrier Risk of condensation, fungus and mould growth behind the skirting board is eliminated The thermal capacity of KORE EPS will not diminish over time and is unaffected by water Achieve U-values from 0.08 W/m²k to 0.011 W/m²k - meeting all current building regulations Contact us today if you are interested in obtaining a quotation for the KORE Passive Slab Insulated Foundation System by telephone or email at [email protected] WHY USE THE PASSIVE SLAB INSULATED FOUNDATION SYSTEM?