Threaded Ball Valves KOM 14 A full bore ball valve, bi-directional, mountable in any position by spherical-conical joint. The ball valve housing is made of brass and a screwed-in connector pipe. The stem features a blow-out protection and is mounted together with the sealing set on the inside of the body. The ball “floats” between two seals, one seal set in the body and the other in the connector pipe. Standard accessories: wrench Optional accessories: connector pipes KOM PN DN L 1 H D R I G kg weight inches mm 16 10 15 20 25 128 158 195 225 L 52 72 100 130 30 32 43 51 14 20 25,8 32 32 38 45 155 10 17 22 19 G ½” G ¾” G 1” G 1¼” 0,4 0,6 1,1 2,4 + + + + + MATERIAL SPECIFICATION - KOM BALL VALVE Brass High pressure steel High pressure cast steel Stainless steel Acid-resistant cast steel Brass High-alloy steel High-alloy steel Nitril rubber Silicone rubber Ethylene- propylene rubber Graphite Carbon steels Polytetrafluoro- ethylene Polytetrafluoro- etylene + filler Poliacetal Alloy steel (with Cr5Ni coating) Body Ball Stem Ball seals Other seals