17 Flanged Ball Valves KOK A full bore, bi-directional valve mountable in any position. The ball valve housing is made of steel, two screwed-in connector pipes and two loose flanges. The stem has a blow-out protection and is mounted together with the sealing set on the inside of the body. The ball “floats” between two seals, set in the connector pipes. In a standard version, flanges and valve face are made acc. to Table 1 (p.5) Standard accessories: wrench Optional accessories: mounting elements (flanges, seals, bolts, nuts) KOK PN DN H R D z g D o d n kg weight pcs. mm 40 100 40 100 40 100 130 130 150 150 160 160 L 15 20 25 90 90 112 112 115 115 125 125 160 160 160 160 95 105 105 130 115 140 18 22 20 24 20 26 14 14 14 18 14 18 65 75 75 90 85 100 4 4 4 4 4 4 2,5 3,4 4,1 5,9 5,4 7,8 + + + + + + MATERIAL SPECIFICATION- KOK BALL VALVE Brass High pressure steel High pressure cast steel Stainless steel Stainless cast steel Brass High-alloy steel High-alloy steel Nitrile rubber Silicone rubber Ethylene- propylene rubber Graphite Carbon steels Polytetrafluoro- ethylene Polytetrafluoro- etylene + filler Poliacetal Alloy steel (with Cr5Ni coating) Body Ball Stem Ball seals Other seals