In This Section Traffic Safety 405 In This Section Hi-Vis Clothing. . . . . . 406-412, 418 Hi-Vis Rainwear . . . . . . . . 412, 415 Hi-Vis Gloves . . . . . . . . . . . 416-417 Traffic Cones. . . . . . . . . . . . . . . 419 Delineator Posts . . . . . . . . . . . . 421 Barricades . . . . . . . . . . . . . 423-424 Paddles & Signs . . . . . . . . 426-428 Vehicle Safety . . . . . . . . . . . . . . 430 Speed Bumps/Cable Protectors 431 Mirrors . . . . . . . . . . . . . . . . . . . 435 Know the Basics of Delineator Posts • Used in parking lots for special events and construction zones on streets • May not be used on highways unless they have a 40 lb. base • Masterflex impact-recovery delineator posts will absorb numerous high-speed impacts and bounce back up ANSI 107-2010 High-Visibility Apparel Standard ANSI Z107-2010 specifies the amount of background material and the amount of retroreflective striping which must be present to qualify as a Class 1, 2 or 3 garment. By knowing some facts regarding the ANSI standard, you can better choose the best type of reflective clothing for your business. Class 1 Garments • Used where there is ample separation of workers from vehicle traffic and where the work scene is not complex • Used where traffic speeds do not exceed 25 mph Class 2 Garments • Used where work activities take place in closer proximity to traffic and where these activities may divert worker attention from approaching traffic • Used where traffic speeds exceed 25 mph Class 3 Garments • Used by workers who are exposed to higher vehicle speeds or reduced sight distances • The worker must be conspicuous throughout the full range of body movement and must be identifiable as a person 1,280' away Know the Basics of Traffic Cones • The minimum height of cones used city on streets is 18" • The minimum cone height used on freeways where speeds are higher is 28" – 36" • In all cases, cones used at night must have reflector collars • 12" cones are typically used in parking lots and 4" – 6" cones are typically used in athletic events, obstacle courses or similar events • Only lime green or orange cones may be used on roadways • Other cone colors are reserved for special events not involving roadways We are your source for Traffic Safety. If you need assistance in choosing the right product for your business or can't find exactly what you’re looking for, please give us a call today and we’ll be happy to provide you with all the information you need to make the right decision. www.mathesongas.com • 877-684-4427
31
Embed
Know the Basics of Delineator - Home | MATHESON€¦ · athletic events, obstacle courses or similar events • Only lime green or orange cones may be used on ... reflective tape
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
In This Section Traffic Safety
405
In This Section
Hi-Vis Clothing. . . . . . 406-412, 418
Hi-Vis Rainwear . . . . . . . . 412, 415
Hi-Vis Gloves . . . . . . . . . . . 416-417
Traffic Cones. . . . . . . . . . . . . . . 419
Delineator Posts . . . . . . . . . . . . 421
Barricades . . . . . . . . . . . . . 423-424
Paddles & Signs . . . . . . . . 426-428
Vehicle Safety . . . . . . . . . . . . . . 430
Speed Bumps/Cable Protectors 431
Mirrors . . . . . . . . . . . . . . . . . . . 435
Know the Basics of Delineator Posts• Used in parking lots for special events and construction
zones on streets• May not be used on highways unless they have a
40 lb. base• Masterflex impact-recovery delineator posts will absorb
numerous high-speed impacts and bounce back up
ANSI 107-2010 High-Visibility Apparel Standard
ANSI Z107-2010 specifies the amount of background material and the amount of retroreflective striping which mustbe present to qualify as a Class 1, 2 or 3 garment. By knowing some facts regarding the ANSI standard, you canbetter choose the best type of reflective clothing for
your business.
Class 1 Garments• Used where there is ample
separation of workers from vehicletraffic and where the workscene is not complex
• Used where trafficspeeds do notexceed 25 mph
Class 2 Garments• Used where work
activities take place incloser proximityto traffic and
where these activities may divert worker attentionfrom approaching traffic• Used where traffic speeds exceed 25 mph
Class 3 Garments• Used by workers who are exposed to higher
vehicle speeds or reduced sight distances• The worker must be conspicuous throughout the full range of body movement and must be identifiable as a person 1,280' away
Know the Basicsof Traffic Cones• The minimum height of cones used city on
streets is 18"• The minimum cone height used on freeways
where speeds are higher is 28" – 36" • In all cases, cones used
at night must havereflector collars
• 12" cones are typicallyused in parking lotsand 4" – 6" cones aretypically used in athletic events, obstacle courses or similar events
• Only lime green ororange cones maybe used on roadways
• Other cone colorsare reserved forspecial events not involvingroadways
We are your source for Traffic Safety. If you need assistance in choosing the right product foryour business or can't find exactly what you’re looking for, please give us a call today and we’llbe happy to provide you with all the information you need to make the right decision.
www.mathesongas.com • 877-684-4427
406
Traffic Safety ANSI Class 2 Vests
Expandable
Class 2 Two-Tone VestsGenerous sizing and rugged construction makes these polyestermesh vests a popular choice for hard-working joes. The ANSI-certifiedreflective tape ensures that your workforce is clearly seen in even thedarkest conditions. Machine washable. Meets ANSI/ISEA 107-2010Class 2 standard.
• Direct Safety® Two-Tone Vests feature 2" reflective tape with 41⁄2"contrasting color. Vests also offer a zipper closure and one smallinside pocket.
• Tingley® Expandable Two-Tone Vests can be adjusted to fit yourheavier winter clothing and worn year round. Vests features 1" silver reflective tape with contrasting backing. Vests also offer a zipper closure, 2 mic/radio tabs and 4 interior pockets, includinga 4-division pen pocket.
Class 2 Surveyors VestsProvide a safe work environment for survey crews whetherthey’re on or off-road. All styles feature 2" reflective tape and a heavy-duty front zipper. Meets ANSI/ISEA 107-2010 Class 2 standard.
• Direct Safety® Surveyors Vest is 100% solid polyester on theshoulders, stomach and lower back, combined with meshpanels on the chest and upper back. Vest includes two insidepockets, two outside pockets with hook-and-loop closures,and two outside pencil pockets on the chest.
• Tingley® Two-Tone Surveyors Vest offer a solid polyesterfront and a mesh back. The contrasting backing behind thetape produces added visibility. Vest also features 2 mic/radiotabs, 3 interior pockets, and 5 exterior pockets including aradio pocket and 4-division pen pocket.
Class 2 Traffic VestsVests are a safe choice forroad construction crews,utility workers, police, surveyors and more. Bothstyles offer 2" reflective tape, aninside front pocket and a hook-and-loop front closure.Machine washable. MeetsANSI/ISEA 107-2010 Class 2 standard.
Class 2 High-Visibility 5-PointBreakaway VestReduce potential harm toworkers with breakawayvests. The five-point hook-and-loop design featuresfasteners on the shoulders,sides and front of the vestthat break-away whenpulled upon. Vests are constructed of polyestermesh with 2" silver reflectivetape. Vests also offer 2 interior pockets and ahook-and-loop front closure.Meets ANSI/ISEA 107-2010Class 2 standard.
ANSI Z107-2010 specifies the amount of background materialand the amount of retroreflective striping which must be presentto qualify as a Class 1, 2 or 3 garment.
Class 1 Garments• Used where there is ample separation of workers from
vehicle traffic and where the work scene is not complex• Used where traffic speeds do not exceed 25 mph
Class 2 Garments• Used where work activities take place in closer proximity to
traffic and where these activities may divert worker attentionfrom approaching traffic
• Used where traffic speeds exceed 25 mph
Class 3 Garments• Used by workers who are exposed to higher vehicle speeds
or reduced sight distances• The worker must be conspicuous throughout the full range
of body movement and must be identifiable as a person 1,280' away
Class 3 MeshTraffic VestStand out from the crowd on the road work, utility or construction crews with thisbrightly colored vest. Vest isconstructed of ANSI-certifiedpolyester mesh with 2" ANSI-certified tape, a hook-and-loop closure and one insidepocket. Machine washable.Meets ANSI/ISEA 107-2010Class 3 standard.
Class 2 Flame-Resistant VestThis lightweight polyester vest not only illuminates workers, butalso offers flame resistance for up to 25 washings. Vest features2" ANSI-certified 3M™ Scotchlite™ tape, one inside pocket andhook-and-loop closures. Fabric passes NFPA 701 and ASTM1506 flammability requirements and vest meets ANSI 107-2010Class 2 standard.
Class 3 High-Visibility Two-Tone VestContrasting stripes provide increased visibility when working nearheavy traffic. This polyester mesh vest offers 2" silver reflective tapewith contrasting backing and a zipper closure. Vests also feature 2mic/radio tabs and 4 interior pockets, including a 4-division penpocket. Meets ANSI/ISEA 107-2010 Class 3 standard.
Class 2 & Class 3 High-VisFlame-ResistantMesh VestsThese flame-resistant vests areconstructed of a modacrylic/Kevlar® mesh. Vests feature 2"reflective tape and one insidechest pocket. Class 2 Vestsoffer a Velcro closure, whileClass 3 Vests offer a zipperclosure. Vests have an arc rating of 5.1 cal/cm2 and meetMeets NFPA 70E Hazard RiskCategory 1 and ANSI 107-2010Class 2 or Class 3 standards.
Non-ANSIBasic High-VisibilityMesh VestsKeep your workers visible and protectedwhen working inareas where theyneed to be seen andrecognized. Vestsfeature sideelastic strapsand a hook-and-loop front closure.Open mesh fabricallows for betterbreathability.Choose from plainvests or vests with avariety of striping pat-terns and colors. Doesnot meet ANSI/ISEA107-2004 standard.
VestsSize Fits Chest Sizes
S/XL 26" – 50"2XL/3XL 50" – 58"
B
C
EF
A
D
Class 2 Expandable Public Safety Vests
These vests offer 3M™ Scotchlite™ reflective stripes throughout, alongwith additional reflective lettering on the front and back that highlightspolice, fire or EMS designations. The adjustable sides with hook-and-looptabs allow for an accurate fit, even over bulky coats. The 5-point breakaway design allows for quick release. Vests feature a radio tab on the chest and an inside pocket. Meets ANSI/ISEA 207-2006 Class 2.
Resistant T-ShirtThese 8.75 ounceheavyweight longsleeve t-shirts aredesigned to keepyou cool, dry andcomfortable, while providingflame resistant protection. In addition to provid-ing flame and arcprotection, shirtsalso offer odorand bacteria
protection, so you will not stink in these shirts. The silver reflectivetrim reflects light for 360° of visibility. Meets ASTM 1506, NFPA 70EHazard Risk Category 2 and ANSI/ISEA 107-2010 Class 3 standard.
Class 2 and Class 3High-Visibility T-ShirtsThese fluorescent shirts provideenhanced visibility and recognition forhard-working men and women in a variety of applications. The Birds Eyepolyester fabric wicks away perspirationto keep workers cooler and more comfortable. Class 2 T-Shirts are shortsleeved and feature one horizontal andtwo vertical reflective 2" stripes. Class 3T-Shirts are long sleeved and featureone horizontal stripe, two vertical stripesand two stripes on the sleeves. Bothstyles offer one pocket. Meets ANSI107-2010 Class 2 or Class 3 standard.
High-Vis Fluorescent T-ShirtImproving employee visibility can significantly reduce accidents.T-shirts offer increased visibility when used in conjunction with
traffic safety vests. T-shirts can also be worn alone in applicationsnot requiring traffic safety vests. 100% pre-shrunk cotton providesyear-round comfort. Does not meet ANSI/ISEA 107-2010 standard.
Class 3 High-Visibility SweatshirtFluorescent sweatshirts are thecomfortable way to providework crews with enhanced visibility and recognition. Thehigh-density polyester materialkeeps workers warm, but isalso very breathable. Shirtsfeature one horizontal stripe,two vertical stripes and twostripes on the sleeves. Allstripes measure 2" and arereflective. One pouch pocket isideal for keeping hands warmand storing small tools. MeetsANSI/ISEA 107-2010 Class 3standard.
Class 3 4-in-1 Bomber JacketOuter jacket is constructed of lightweight, water-resistant polyesterwith 3M™ Scotchlite™ reflective stripes and a 100% nylon lining. The outer jacket can be worn alone or the sleeves can be removedto make a lined Class 2 vest. The inner fleece jacket zips out tobecome a lightweight coat that can be worn alone in non-trafficareas. Jacket features elastic cuffs, three outside and two insidepockets and a detachable hood. Meets ANSI/ISEA 107-2004 Class 3 standard.
Class 3 Bomber JacketThe Class 3 Bomber provides warmth, comfort,and safety in a durable,affordable high-visibilityjacket. This 100% waterproof jacket featuresthe warmth of a fleecebody liner and polyesterquilted sleeves. The 2" silver reflective tape produces 360° nighttimeconspicuity. The black fronthelps conceal dirt. Jacketoffers 5 exterior and 3 interior pockets, underarmvents, elastic waist andsleeve cuffs, and azipper/storm fly front.Meets ANSI/ISEA 107-2004Class 3 standard.
Class 3 WindbreakerThis 100% polyester windbreaker is coated with polyurethane toproduce wind and water resistance. The black accents on theshoulders and wrists help prevent that “dirty jacket” look. Jacketfeature a detachable hood and 3M™ Scotchlite™ reflective stripesthroughout. Meets ANSI/ISEA 107-2004 Class 3 standard.
Phase 3 JacketA revolutionary three-layer material keeps you warm and dry, yetcool and comfortable in diverse weather conditions. Jacket offersamazing warmth-to-weight ratio in a breathable, wind- and water-resistant system. Inner fleece layer provides warmth and comfort.The 2" silver reflective tape produces 360° nighttime conspicuity.Jacket features front hand warmer pockets, right breast securitypocket, Velcro take-up straps on the sleeve cuffs and azipper/storm fly front. Longer cut back with adjustable elasticdraw cord produces extra coverage. Charcoal grey front helpsconceal dirt. Meets ANSI/ISEA 107-2004 Class 3 standard.
This jacket can be worn in 8 different configurations and has pockets everywhere,making it the ultimate jacket for any workplace that requires high-visibility clothing.The outer shell is constructed of lightweight, water-resistant polyurethane-coatedpolyester, while the inner shell is constructed of polyester fleece. Both the innerliner and outer shell are high-visibility yellow with ANSI-certified striping. Both theinner liner and outer shell can be worn alone, or the sleeves can be removed tomake a Class 2 vest. Both also offer a fleece collar. The concealed detachablehood works with both the shell and liner. Jacket features outside zipper pockets,an inside breast pocket, a cell phone pocket, a clear ID holder pocket and apen/pencil sleeve pocket. Meets ANSI/ISEA 107-2004 Class 3 standard.
RainwearIcon Jackets features innerand outer breast pocketswith zipper closures andhand warmer side pocketsand cargo pockets with
Velcro closures. This PVC-coatedpolyester rainwear offers stitched and tapedseams for 100% waterproof protection. The fluorescent yellow-green material and 2"silver reflective tape provides 360° nighttimevisibility. Velcro take-up straps on the sleevesor legs produce an adjustable fit. Icon Jackets
also offer a full vented cape back for improved air circulation and D-ring access for a fall protection harness. Meets ANSI/ISEA 107-2004 Class 3 standard.
Vision®
RainwearVision Rainwearoffers great features,such as a roll-a-wayjacket hood andnon-conductive
hardware, at an affordable price. ThisPVC-coated polyester
rainwear offers stitched andtaped seams for 100% water-
proof protection. The fluorescentyellow-green material and 2" silver
reflective tape provides 360° night-time visibility. Velcro take-up straps on the sleeves or legs producean adjustable fit. Meets ANSI/ISEA 107-2004 Class 3 standard.
• Class 3 3-Piece Rainsuit is fluorescent orange and constructedof .35mm PVC-coated polyester with 2” silver/lime striping. Biboveralls offer a snap fly, partial elastic suspenders and reflectivetape around the knees. Jacket features a detachable hood andcovered patch pockets.
• Class 3 2-Piece Stretchable Rainsuit is constructed of a .40mmpolyurethane-coated polyester/cotton blend. Jacket offers a roll-up hood, a zipper front closure with storm flap and 2 frontpockets. Pants have an elastic waist with drawstring and expandable ankle openings with zippered gussets. Meets ASTMD6413 for flame resistance.
• Class 3 Breathable Jacket with Hood is made of polyester covered with polyurethane. The breathable polyurethane coatingallows perspiration to escape. Jacket features an inside zipperpocket, two outside zipper pockets with storm flaps and a zipperfront closure with Velcro storm flap. Jacket has attached hoodwith drawstring, inset sleeves and 2” reflective tape throughout.
• Navigator Class 3 Jacket with Hood is made of .28mm polyester/polyurethane material with 2” reflective stripes aroundthe waist, wrists and over the shoulders. Jacket has attachedhood with drawstring, take-up snaps at the wrists and a plasticsnap storm fly front.
• Class E Breathable Rain Pants are made of polyester coveredwith polyurethane. The breathable polyurethane coating allowsperspiration to escape. Pants have an elastic waist with drawstring, expandable ankle openings with zippered gussetsand reflective stripes around the ankles. Pants feature two slanted outside pockets and one outside back pocket with a zipper closure and Velcro storm flap.
• Navigator Class E Rain Pants are made of .28mmpolyester/polyurethane material with 2” reflective stripes aroundthe ankles. Pants have an elastic waist with drawstring, take-upsnaps at the ankles, a snap fly front and no pockets.
Luminator™ RainwearWhen Visibility is Your Top Priority
Stay dry and visible in rainy, dark conditions. All styles feature 2" reflective stripes in various locations to provide increased visibility. Jacketsmeet ANSI/ISEA 1007-2010 Class 2 or 3 standard. Pants meet ANSI/ISEA 1007-2010 Class E standard.
Class 3 3-Piece Rainsuit
NavigatorClass 3 Jacket
with Hood
Navigator Class E Rain Pants
Class E Breathable Rain PantsClass 3 Breathable Jacket with Hood
4-in-1 Hi-VisThermal ClothingThis foul weather gear provideswater and wind-proofing fromthe inside out. 100% polyesterouter shell offers two frontpockets and one cell phonepocket. Inner liner featuresdetachable sleeves, two outsidepockets and one inside pocket.Both the inner shell and Pantsfeature 3M™ Thinsulate™ lining.The storm front features bothzipper and snap closures.Jacket meets ANSI/ISEA 1007-2010 Class 2 or 3 standard.Pants meet ANSI/ISEA 1007-2010 Class E standard.
High-VisibilityRainwearImprove worker safety byincreasing their visibility in adverse weather conditions. 2" glass beadreflective tape produces360° of light reflection.Rainwear is flame-resist-ant and constructed of a 14 mil PVC-coated polyester for increaseddurability. MeetsANSI/ISEA 107-2010Class 3 standard.
• Both the Jacket and48" Coat feature Class3 striping, zipper flyfront, Velcro take-upstraps, roll-away hood,full vented cape backand two cargo pockets
• Overalls include striping, storm fly front,Velcro take-up strapsand cross-over suspenders with quick-release buckles
www.mathesongas.com • 877-684-4427
Hi-Vis FR Rainwear Traffic Safety
415
Electra Class 3 Hi-VisSafetyRainwearThe combinationof flame-resist-ant PVC coating onnon-wovenNomex provides excellent thermal performanceand maintains100% water-proof protection.2" silver reflectivetrim reflects light for 360°nighttime visibility.Zipper/storm fly frontseals out wind, rain andcontaminants. Corduroy collar features hood-in-collar construction foradded convenience. Full-vented cape back provides improved air circulation. Jacket offersD-ring access for a fallprotection harness.Clothing features non-conductive hardware andan arc rating of 7 cal/cm2. Meets NFPA 70E Hazard Risk Category 2and ANSI/ISEA 107-2010Class 3 standard.
We offer a complete supply of Rainsuits, Jackets, Ponchos andOveralls in our Clothing section on pages 179-187.
Don’t FORGET...
Arc H20 Class 3 Hi-Vis RainwearThis flame-resistant rainwear is constructed of polyurethaneover a cotton knit fabric. The 2"reflective striping increases visibility throughout the garment.Jacket measures 30" in length.Clothing features non-conductivehardware and an arc rating of 19cal/cm2. Meets NFPA 70E HazardRisk Category 2 and ANSI/ISEA107-2010 Class 3 standard.
• Direct Safety Cotton Canvas Work Gloves are an ideal every-day glove for workers who are doing on a dozen different thingsthroughout the day. We offer Dotted styles for added grip,Corded styles to help wick away and absorb oil and Double PalmStyles for added protection and support to the front of the hand.
• Direct Safety Contact Gloves are foam nitrile coated on thepalm and fingers for abrasion resistance and added grip, evenwhen handling small, oily parts. The open nylon back allows yourhands to breath. Meets FDA standards for food contact.
• Direct Safety Charger Gloves offer a poly/cotton shell for light-weight abrasion resistance, without sacrificing dexterity. The foamcoating provides excellent grip in light oil applications by chan-neling the oil away from the glove surface. Meets FDA standardsfor food contact.
• Direct Safety Cold Snap Gloves offer a heavyweight acrylicterry shell for extra warmth when working outside in cold conditions. The foam nitrile coating on the palm and fingers produces added abrasion resistance and grip. Meets FDA standards for food contact.
• ShowaBest Atlas 317 Hi-Viz Grip Gloves are palm-dipped innatural rubber to provide durable protection, without sacrificinglong-wearing comfort. The orange crinkle coating provides extragripping action. Glove markings are luminous and actually glowin the dark. An elastic knit wrist secures the glove above the wristand prevents debris from entering the glove. Gloves offer ANSIlevel 2 cut resistance.
High-Visibility String-Knit and Canvas GlovesChoose from a variety of styles for applications such as construction, highway work, garbage collection and maintenance that require high-visibility hand protection. Price per pair.
Direct Safety® Cotton Canvas, Dotted
Direct Safety® Contact™ Direct Safety® Charger™ Direct Safety® Cold Snap™ ShowaBest® Atlas® 317 Hi-Viz Grip™
Direct Safety® Cotton Canvas, Double Palm Direct Safety® Cotton Canvas, Dotted,Double Palm
• Direct Safety Grain Pigskin Double Palm Gloves are fully linedand feature a double palm for added shock absorption. Glovesare Kevlar sewn and feature 5mm of padding, making them long-lasting and comfortable.
• Direct Safety Premium Grain Pigskin Driver’s Gloves combineabrasion resistance and breathability, making them ideal formany general purpose applications. Premium Grain PigskinGloves with 3M™ Thinsulate lining are designed to trap and holdbody heat, yet won’t absorb water.
• Direct Safety Select Shoulder Leather Gloves are ideal forroadside applications that require the abrasion protection ofleather and the breathability of cotton. Leather covers the palm,thumb, index finger and other fingertips.
• Memphis Luminator Premium Grain Pigskin WaterproofDriver’s Gloves feature a Thermosock® lining that traps air as itmoves through the glove and uses your body heat to warm thecool air before it reaches your skin. The inner lining wicks awayany moisture, keeping your hands warm and dry. 3M™ reflectivetape reflects light directly back to its source.
• Memphis Luminator Shoulder Leather Palm Gloves feature3M™ reflective tape on knuckles, back and cuff. Glove offers awing thumb and a 21⁄2" safety cuff. Leather covers the palm,thumb, index finger and other fingertips.
High-Visibility Leather Gloves These leather gloves are great for heavy-duty road work, construction and heavy equipment operators.All styles offer an orange back with reflective tape to improve your visibility and safety in low-light situations. Price per pair.
Direct Safety® Premium GrainThinsulate Lined Gloves, Knit Wrist
Direct Safety® Premium Grain Pigskin Driver's Gloves
Direct Safety® Premium Grain Thinsulate Lined Gloves, Safety Cuff
Hi-Vis CapsPut a lid on for added visibility during nighttime and low lightapplications. Hat is constructedof ANSI-certified oxford
polyester with 1⁄4" level 2 ANSI-certified reflective tape
around the brim and bottom of the cap. Caps
have two mesh panelsalong the sides. Choose Caps
with Insect Shield® for long-lasting,convenient protection from bugs. Insect
Shield repellent is proven and registered with the EPA to repel
mosquitoes, ticks, ants, flies, chiggers, and midges. It’s built
right into the hat and laststhrough 70 washings. One size
fits all. Machine washable. MeetsANSI/ISEA 107-2004 headwear standard.
Ranger HatsChoose a hat with a brim that keeps you cool and tape thatkeeps you visible. Polyester hats feature mesh venting panelsand ANSI-certified tape with contrasting color. Meets ANSI/ISEA107-2004 headwear standard.
OccuLux Hi-VisKnitted CapThese brightly colored polyester caps will keep yournoggin warm and visible.Design features a 360° stripeof 3M™ reflective silver threadfor added visibility from a distance. Machine washable.
Class E High-Visibility PantsThese breathable andcomfortable pants featureelastic leg openings withhook-and-loop closures,so you don’t have totake off your work bootsto put them on. Pantsare constructed ofpolyester mesh andfeature an elasticwaist with drawcordand 2" silver reflec-tive tape on thelower leg. Pantshave two sideaccess openingsand one exteriorpocket. MeetsANSI 107-2004Class E standard.
High-Vis Leg GaitersAdd daytime and nighttimeconspicuity, while protectingyour pants and boots fromwhatever you happen to bestepping in. Gaiters feature aweatherproof polyurethane-coated polyester shell and 2" 3M™ Scotchlite™ reflectivestripes. Drawstring closuresare included on both the topand bottom. Price per pair.Meets ANSI/ISEA 1007-2004Class E standard.
Lime36219 Small/Medium, 29" Inseam, Up to 38" Waist36220 Large/X-Large, 31" Inseam, Up to 46" Waist 1-5 6+36221 XX-Large/3X-Large, 32" Inseam, Up to 54" Waist $25.25 24.00Orange36216 Small/Medium, 29" Inseam, Up to 38" Waist36217 Large/X-Large, 31" Inseam, Up to 46" Waist36218 XX-Large/3X-Large, 32" Inseam, Up to 54" Waist 25.25 24.00
www.mathesongas.com • 877-684-4427
Traffic Cones Traffic Safety
419
Traffic ConesThese heavy-duty all-weather cones are constructed of 100% PVC.Cones stack for easy storage. Meets federal MUTCD standards.
• Slimline Cones are less likely to tip over in windy conditions.
• Cones with Reflective Collars offer added visibility in low light ornighttime applications.
• Cones with Recessed Reflective Collars reduce the chances ofabrasions, peeling and ripping of the reflective tape.
• 18" reflective cones have one 6" band, while 28" and 36" coneshave one 4" and one 6" band.
This light mounts to any style 18", 28" or36" traffic cone. The 360° amber lens flashes at a rate of 120 – 150 flashes perminute. Photocell turns lights on at dusk/offat dawn to conserve battery life. Unit measures 8"H X 31⁄4" Dia. Mounting bracketis included, 6-Volt Battery (#81943) is not included.
Cone HolderCone Holder bolts onto bumpers orframes for handy storage on vehicles.
1-2 3+84012 . . . . . . . . . . . $19.65 18.70
Cone Top Warning Signs
Add a warning message to the topof your cones. Simply slip the cut-out at the bottom of these signs intothe top of any traffic cone. Signs are imprinted on both sides. Theseall-weather signs are made of fade-resistant polycarbonate plasticand measure 10" X 14".
420
Traffic Safety Traffic Cones Accessories
Cone BarsJust drop the Cone Bar ring onto the top of cones or N-TopDelineators to setup an inexpensive barrier around hazardous orcontrolled areas. The Cone Bar is extremely versatile for roadsideor utility works use, construction sites, parking lots, pedestrianareas, and more. Using four traffic cones and four Cone Bars, aworker can set up a square barrier in less than a minute. The unitis retractable, so it adjusts in length and can be easily locked in.
EZ-Grab Delineator PostControl traffic movement with these orange plastic posts. Dual 3"white reflective bands and orange reflective inserts provide addednighttime visibility. A rugged handle allows for easy movement andcan also be used to secure barrier tape, rope or other controldevices. Post with Flashing LED Panel provides a bright attention-getting option in low-light situations. Requires two 6-volt batteries,sold separately below. Rubber Base weighs 10 lbs. for stability in alltypes of weather. Order Post and Rubber Base for a complete unit.Post meets NCHRP 350 guidelines. 71221 will ship separately,direct from the manufacturer.
B
AMasterflexPostsThese posts aredesigned to with-stand numeroushigh-speed trafficimpacts. Chooseeither 180° Postwith two 3” X 12”reflective panelsor 360° Post withtwo 3” reflectivebands. Thesehigh-impact poly-ethylene postsmeasure 36”H X21⁄4” diameter.Post attaches torubber base withtwo bolts. ButylAdhesive Padallows for secur-ing of the rubberbase to asphalt orconcrete.
Did You Know...Nationally, on average, three work zone fatalities occur every
day. The majority of people injured or killed in these crashesare drivers, passengers or pedestrians, not workers. The single biggestfactor in crashes is driver inattention — that’s why orange cones, high-visibility clothing and signs are used to alert motorists of work zones.
Portable Delineator PostsUse these posts for temporary placement where space is limited and height is important. Low-density polyethylene construction maintains superior resistance toimpact over a wide temperature range. A specially designed 4” channel protects the 3” high-intensity reflective tape. N-Top Delineator Post has a hand grip on topfor ease of loading and unloading. It is also designed to be used with caution tapeand/or JBC Cone Bars (sold separately) to form an instant barrier. Posts are brightred-orange throughout for maximum visibility. Bases slip over the post to keep it inplace. 3M™ Reflective Bands provide excellent wide-angle reflectivity, giving thecone its full width appearance at night. Order Cone and Rubber Base for a complete unit.
Grip and Go™Channelizer ConesChannelizer Cones utilize lessspace than traditional barrels ordrums. 42" cones are stackablefor confined storage and featurea handle for portability. Conesare constructed of low-density
polyethylene with UVinhibitors to minimize fading. A barricade light or tape can be
connected to the top of thecone. Order Cone and RubberBase for a complete unit. MeetsFederal MUTCD standards.
1-5 6+12956 Cone without Bands . . . . . . . . . . . . . . . . . . . . $17.05 16.2012957 Cone with One 4" Band and One 6" Band. . . 26.75 25.4512958 Cone with Four 4" Bands . . . . . . . . . . . . . . . . 36.75 34.95
A.12959 Cone with Four 6" Bands . . . . . . . . . . . . . . . . 43.45 41.3012960 Cone with Two 6" Bands and
Grabber™ ConesThese cones are made of flexible, low-density polyethylene to allow for rebounding and reshaping.Cones are available with or without reflective bands.Order Cone and Rubber Base (10 lbs. or 16 lbs.) fora complete unit. Cones stack for easy storage. MeetsFederal MUTCD standards.
T-TopStackableConeThis high-densitypolyethylene coneoffers a T-shapedhandle with amounting hole for alight. Large rubberbase providesadded stability inwindy conditions.High-intensityreflective bandsproduce increasedvisibility. Band areais recessed to prevent wear on the sleeve. Conemeasures 42"H witha 161⁄2" octagonbase and weighs 11lbs. Meets NCHRP350 guidelines.
TrafFix A-Cade BarricadeThe Type I A-Cade Barricade is constructed of
impact-resistant polyethylene and designed to meet therigorous demands of construction zones. The A-Frame issand fillable for ballasting, accepts a standard barricadelight (sold separately) and stacks easily for storage/transport. A-Frame accepts the TrafFix Rail or nominalsize lumber measuring 1" X 8" or 2" X 8". Flexible anddurable polyethylene TrafFix Rails feature an I-beamdesign that protects the reflective sheeting from damageand allows nesting for easy storage and transport. For acomplete Barricade, order two A-Frames and one TrafFixRail. Meets Federal MUTCD standards. This product will ship separately, direct from the manufacturer.
EZ-GrabWide BodyDelineatorThis wide bodydelineator is a high-visibility target thattakes up less sur-face space. Unit isbuilt with a lowerprofile to withstandrepeated impacts.Rugged handlemakes movingand stacking abreeze. Handlealso has a built-in holderfor traffic batons and acenter mount light bolthole. Post features four4" high-intensity stripes.Unit measures 13" Dia.on top and 161⁄2" Dia. onthe bottom. Order Postand Rubber Base for acomplete unit. NCHRP 350 certified.
SuperdomeDrumsThese low-density polyethylene drums aredesigned to withstandrepeated high impactsand rebound efficiently.Heavy-duty support ribsand recessed bandareas protect the reflective sheet-ing. Ribbed dome top has twomolded light mounts and two flagmount holes. Large handle provides gloved workers with acomfortable, secure grip. Bandedunits feature two orange and twowhite reflective bands. Drumsmeasure 39"H X 18" diameter andweigh 12 lbs. Rubber and PolyBases are sold separately. Thisproduct will ship separately,direct from the manufacturer.
A-Frame BarricadeRestrict access to an area, either temporarily or long-term, with thisA-Frame Barricade. A-Frames feature an attachment hole formounting a light. The durable legs have mounting holes to accom-modate a variety of boards, planks and rails. Legs will not rot, rust,crack or peel. I-Beam Rails feature engineer-grade sheeting on bothsides. For a complete Barricade, order two A-Frames and either oneI-Beam Rail for Type I barricade or two I-Beam Rails for a Type IIbarricade. Meets Federal MUTCD standards. This product will shipseparately, direct from the manufacturer.
Type I BarricadePolyethylene Type I Barricade is constructed with anorange/white reflective panel and is designed for heavy-duty use in all weather conditions.
Type I and II Plastic BarricadesThese 45" X 24" barricades offer high-density polyethylene construction withprotective wear tabs on the bottoms of the legs. Units can be filled with sandfor ballast. NCHRP 350 certified. This product will ship separately, directfrom the manufacturer.
Type I and II Wood BarricadesChannel traffic around dangerous work areas. Barricade is constructed of 1⁄2"plywood panels, reflective sheeting and 14-gauge iron legs. Type I Barricadeshave reflective sheeting on the top panel, while Type II Barricades have reflective sheeting on both the top and bottom panels. NCHRP 350 certified.This product will ship separately, direct from the manufacturer.
A
Dixie® Poly-Cade BarricadesPoly-cades are ideal when you’re dealing with traffic control, crowd control and channeling, safety areas,restricted areas, no parking, hazardous materials andmachinery access. Poly-cades are lightweight, rustproofand UV-protected. All units have a 4" fill cap and 2" drainand can be filled with sand or water. This product willship separately, direct from the manufacturer.
A. Poly-Cade, 72"L X 16"W X 35"H, 70 lbs.13208 Orange13209 White . . . . . . . . . . . . . . . . . . . . . . . . . $289.75
A. 8400541"H X 24"W, 12"H Top Panel, 4"H Bottom Panel . . . . . . . . . . . . . . .
1-5 6+$73.55 69.90
1-5 6+12408 Type I, 45"H X 24"W, 12"H Top Panel, 8"H Bottom Panel . . . . . . $66.85 49.9512409 Type II, 45"H X 24"W, 8"H Top Panel, 8"H Bottom Panel. . . . . . . 68.25 51.80
A
Barricade Warning Lights can be found on page 425.Don’t FORGET...
Type I 1-5 6+25159 45" H X 24"W, 8"H Top Panel, 6"H Bottom Panel . . . . . . . . . $43.60 41.4525161 45" H X 36"W, 8"H Top Panel, 6"H Bottom Panel . . . . . . . . . 56.65 53.85
Type II25160 45"H X 24"W, 8"H Top Panel, 8"H Bottom Panel . . . . . . . . . . 47.30 44.9525162 45"H X 36"W, 8"H Top Panel, 8"H Bottom Panel . . . . . . . . . . 60.90 57.90
www.mathesongas.com • 877-684-4427
Lighting Traffic Safety
425
Barricade Warning LightsChoose from warning lights witha variety of features. The 7" poly-carbonate lenses have a flashrate of approximately 65 timesper minute. Photocell turnslights on at dusk/off at dawn toconserve battery life. Using LEDlights can provide up to 90 daysof battery life and a bulb life of 5 years or more. 4D LED Lights have asnap-lock base for the batteries. 4D LED Light with Solar Panels tricklecharges the D batteries to provide a longer-lasting power source. 12-voltmodels require one battery, 4D model requires four D batteries (notincluded). Meets Federal MUTCD standards.
LED Traffic WandThis hand-held, battery-powered warning lightwand can be used for directing vehicle and/oraircraft traffic. Translucent red wand is 16" longand can be operated as a flashing red strobelight or a steady red. Light includes an attachedlanyard and runs on two D batteries, sold separately below.
Microlit Flashing Cone LightThis light mounts to any style 18", 28" or 36" traffic cone. The 360° amber lens flashes at a rate of 120 – 150flashes per minute. Photocell turns lights on at dusk/off at dawn to conserve battery life. Unit measures 8"HX 31⁄4" Dia. Mounting bracket is included, 6-Volt Battery (#81943) is not included.
LightsticksBend, snap and shake theselightsticks to provide an instantlight source that is safe anddependable for applicationssuch as: roadside work, trafficcontrol and evacuations.Lightsticks are unaffected bywind or rain, and can even beused underwater. Lightsticks arenon-flammable and do not pro-duce heat or sparks, so they’reideal for use where explosive liq-uids may be present. Lightsticks measure 6", unlessotherwise noted below.
Personal Safety LightUse this light when you want to warn pedestrians or co-workers of a nearby hazard or potentially dangerous workarea. Light with magnetic-mount base can be used in ware-houses, parking lots or virtually any industrial setting. Lightfeatures four distinct flash patterns: single flash, double flash,simulated rotating and steady burn. Light will run for 400hours on two D-size batteries (#81936), not included. Unitmeasure 51⁄2"H X 41⁄4" Dia.
Traffic SignsThese heavy-duty 0.80" aluminum signs will not rust. They are constructedwith a reflective sign face for added visibility in low-light conditions and UVresistant inks to reduce fading. Signs have top and bottom center mountingholes. Speed Limit Signs are MUTCD compliant for public roadway use.
• U-Channel Sign Post is made of high-carbon steel. It’s easy to install, withno post hole digging required.
• Sign Standard with Base is constructed of cast iron and is ideal for use inparking lots or any facility where traffic control/instruction is needed.
85084 U-Channel Sign Post, 8'H X 21⁄2"W 44.20 42.0085085 50" Sign Standard with 14"W Base 124.60
www.mathesongas.com • 877-684-4427
• Sign Ribs are needed to keep signs rigid and can be purchasedseparately.
• Dynaflex Sign Stands feature an exclusive base, spring and legsto provide stability on uneven terrain and resist winds up to 50MPH. Stand include the aluminum base, flag holder and threeflags.
• Portable Sign Stands feature carrying handles for easy move-ment and placement. Recycled rubber base is skid-resistant andremains stable in windy conditions. Simply raise mast and insertcorner of sign until it locks in place with universal adaptor. Standcan be used with use with 36" or 48" signs. Unit measures 171⁄2"WX 28"H X 4"D and weighs 38 lbs.
• Tripod Sign Stand holds anyrigid or roll-up sign up to 48" X 48". Tripod is made of zinc-plated steel and meas-ures 62" height in closedposition and 54" height inopen position. Minimum signdisplay is 12" from ground.
• Sign Case is made of vinyl-coated nylon with snapclosures and holds one signand ribs.
Dynaflex™ Roll-Up Traffic Signs and StandsRoll-Up Traffic Signs are easy to set-up and convenient to store. Choose from a wide variety of legends in both Mesh and Reflective Vinyl styles.
1 Choose Your Mesh or Vinyl Sign
Signs Traffic Safety
427
Portable Sign Stand
Tripod Sign Stand
Stop SignsReflective Aluminum Stop Signs provide additional visibility inlow-light conditions and dark areas when light is directed at thesign. .080 thick aluminum produces the strength and durability ofmetal, yet does not rust. Sign is UV-resistant and can last for yearsindoors or outdoors. High-Intensity Reflective Aluminum StopSigns have small prismatic reflectors with a honeycomb pattern inthe sheeting. Signs offer about 4 times greater reflectivity than traditional signs for increased visibility at busy intersections.Optional U-Channel Sign Post is made of high-carbon steel. It’s easy to install, with no post hole digging required.
2 Choose Your Sign Rib
3 Choose Your Sign Stand
Dynaflex™ Sign Stand with 36" Mesh Sign
36" Mesh Sign 48" Mesh Sign36" Reflective Vinyl
Sign48" Reflective Vinyl
Sign
Flagger Ahead 28590 28597 28603 28611Men Working — 28598 28604 28612Mowers Ahead 28591 — 28605 28613One Lane Road Ahead 28592 — 28606 28614Road Closed Ahead 28593 28599 28607 28615Road Work Ahead 28594 28600 28608 28616Utility Work Ahead 28595 28601 28609 28617Work Area Ahead 28596 28602 28610 28618
Safety Barrier TapesThese non-adhesive vinyl tapes prevent accidents by increasing visibility of hazards. Safety message is continuously repeated in large black lettering. Each roll of tape measures 3" X 1,000'.
Safety Barrier Tape, 4 mil Economy Barrier Tape, 2 mil
Safety Barrier Tape, 4 mil ThicknessYellow Background83420 Caution Caution24800 Caution Cuidado83421 Caution Do Not Enter83430 Caution Construction Area83432 Caution Wet Floor 1-11 12+83423 Yellow/Black Stripes. . . . . . . $20.75 19.75Red Background83424 Danger Danger83431 Danger Do Not Enter . . . . . . 20.75 19.75Orange Background83433 Caution Biohazard . . . . . . . . 20.75 19.75
Economy Barrier Tape, 2 mil ThicknessYellow Background83879 Caution11992 Caution Cuidado11993 Caution Do Not Enter11994 Caution Construction Area 10.80 10.30Red Background11995 Danger11996 Danger Do Not Enter . . . . . . 10.80 10.30
Barrier FencingPlastic fencing sets up in minutes to provide a physical barrier and visual warning around hazardous areas. Reusable fencing is available in Lightweight or diamond-mesh Safety material. Nylon Ties secure fence to post.
Paddle SignsVisually warn oncoming traffic toslow down or stop.These hand-held aluminum signs areideal for worksite orschool crossing guardapplications. 18" Signsinclude a 10"L woodhandle. 24" Signrequires the purchaseof a separate 60"Wood Handle.
Mesh
Fluorescent Warning FlagsDirect traffic and warn motorists ofupcoming construction with yourchoice of a fluorescent orange/redVinyl or Mesh flag. Both feature awood handle.
Safety WhistleThe penetrating sound of this whistle cutsthrough crowd noise and carries over along distance. Whistle is ideal for police, firefighters, crossing guards, lifeguards, airportground crew or anyone involved in traffic control. There are no moving parts to freeze,jam or deteriorate. Unit has a sound power of 115 dB.
Marking Paint/Megaphone Traffic Safety
HighwayWarningTrianglesHighly visible, reflectivetriangles are designed tokeep you safe duringroadside emergencies.They are easy to use andconstructed with wirebracing to keep themsecure in all weather con-ditions. Set of three trian-gles folds for storage incarrying case. Complieswith Federal MotorVehicle Safety StandardNo. 125.
1-5 6+84140 . . $27.50 26.15
Snow FlagUse this 9" X 11" flag for marking fire hydrants, trails or other boundaries and landmarks in areas that are subject to heavy snow. Flag comeswith a 6' fiberglass pole.
MegaphoneWith Built-In SirenAmplify verbal communica-tions during emergencies orcrowd control situations.Magaphone has a 15-wattadjustable volume output forclear communications. Thepistol grip handle allows forsecure, one-handed opera-tion. Wall-type siren providesemergency notification. Unitrequires eight C batteries,sold separately.
Industrial Choice™Inverted Marking PaintInverted Marking Paint produces bright,vivid markings. For use in landscaping,surveying, construction and utility applications. Paint produces virtually nooverspray and resists premature chalking and fading. Paint dries in lessthan 5 minutes and can be applied intemperatures as low as 25°F. Use theMarking Pistol for quick, convenientand accurate marking. Marking PaintBag holds three cans of paint and has an extra compartment for other supplies.
WindsockThis windsock is ideal for use in airports, air fields, industrialsettings and agricultural applications. Windsock measures 36"L with a 10" throat. Windsock Hardware includes a frame constructed of heavy-duty wire with sleeve and setcollar. Frame is zinc coated for weather protection.
Kit Contains:3 20-Minute Fuses with Wire Stand3 Reflective Triangles1 23⁄4 lb. 10-B:C Fire Extinguisher1 Plastic Carrying Case
Urethane Wheel ChocksThese impact-absorbing urethane wheel chocks grip tiresand the road. Chocks will not cause tire or pavement damage and are oil and chemical resistant. Mounting holescan be used for chains or ropes. Optional Cable LoopHandle is also available. Chocks weigh 41⁄2 lbs. and measure11"L X 73⁄4"W X 8"H. Sold individually.
Optional Cable Loop Handle
DeluxeHighwayEmergencyKitWhether you’regoing to be on theroad for the longhaul, or just a shorttrip, choose a kitthat will go the distance. Kit contains a variety of different items todeal with virtuallyany roadside emergency. Paddednylon bag featurespockets, a carryinghandle and Velcroclosures. Kit will beshipped via groundtransportation.
IndustrialWheelChocksFederal SafetyStandards requirethat vehicles bechocked while load-ing and unloading.Rubber WheelChocks feature atraction design thatgrips both the tireand the road.Available withoptional 15' Chain.Meets OSHArequirements.
B
Portable Jump StartBattery Pack and AirCompressor
Jump start your vehicle, refill yourtires and give yourself plenty ofpower in any emergency. The battery pack delivers 900 peakamps or 450 cold-cranking amps.The 250 PSI air compressor
inflates tires quickly. The 12-volt power port can be used
to power a cell phone orother electronics. Safetyfeatures include overloadprotection and automaticcharge cutoff. Unit also
includes a work light andcomes with an AC and DC
charging adapters.
Drive-A-Way KitBe prepared for anyroadside emergencywith this convenientand compact kit.
Kit Contains:1 Set of Jumper Cables1 2-B:C Fire Extinguisher1 Siphon Pump2 15-Minute Road Flares1 Flashlight1 Can of Fix-a-Flat1 Phillips Head Screwdriver
1 Flat Head Screwdriver1 Roll of Electric Tape1 Roll of Repair Wire4 First Aid Towelettes1 Box of Assorted Bandages1 Water Bag1 Distress Flag1 Kneeling Pad
1-5 6+31099 . . . . . . . $92.65 88.05
Fleet Safety KitEverything you need todeal with a roadsideemergency is conve-niently packaged in thishandy kit. This productcontains hazardousmaterials, additionalshipping charges apply.
13107 . . $72.60
1-2 3+11990 . . $112.85 107.25
www.mathesongas.com • 877-684-4427
Speed Bumps/Cable Protectors Traffic Safety
431
Parking Stopsand Speed Bump/Cable Protector
Bring safety to your parking lot with durable Parking Stops and SpeedBump/Cable Protectors. Both products are constructed of high-densitypolyethylene for excellent chemical, UV and weather resistance. SpeedBump has a capacity of 20,000 lbs. per tire and also acts as a dual channel cable protector for air, water or electric lines. Parking Stopsmeasure 72"L X 8"W X 4"H. Speed Bump/Cable Protectors measures72"L X 10"W X 2"H with a 1.25"W X .875"H opening for cables. Bothinclude a three anchor kit for easy installation in asphalt or concrete.This product will ship separately, direct from the manufacturer.
B
A
Speed Bumps and Parking BlocksKeep your parking lot safe and protected with 100% recycledplastic Speed Bumps and Parking Blocks. Speed Bumpsforce cars in your parking lot to slow down. Parking Blocksprotect walls and equipment. Both chemical and weather-resistant products include 12" plated metal spikes for permanent installation. This product will ship separately,direct from the manufacturer.
1-4 5+A. 77622 Speed Bump, 21⁄4"H X 10"W X 72"L . . . . $103.60 98.45B. 77623 Parking Block, 4"H X 6"W X 72"L . . . . . 67.35 64.00
A
B
AB
C D
Powerback®
Rubber Duct SystemsProtect and cover cords and cables in walkways and workareas. These flexible rubber protectors organize cords andcables, while reducing trip hazards. All models ship without theslit in the bottom, except 41097.
Linebacker®
One Channel Drop Over Cable ProtectorProtect cables and hose lines from vehicle and foot traffic. Unit is alsoideal when re-routing cables. This single channel system protect cablesup to 1.25" in diameter. Polyurethane unit measures 36"L X 11.5"W X1.6"H and has a load capacity of 11,700 lbs. per tire. This product willship separately, direct from the manufacturer.
Dixie® Corner, Bump and Rack GuardsCushion corners, walls and rack from forklift blows and deflect impacts from trucks.Choose from polyethylene or 100% recycled plastic styles. All weigh 3 lbs.• Corner Protectors wrap around corners and door frames to protect them from
bumps and scrapes.Corner protectors sold by the pair.• Bolt the Bump Guard to your walls to resist impacts and reduce damage from
forklifts and other powered equipment.• Rack Protectors will surround most every size pallet rack. Unit can be bolted to
We offer a wide rangeof environmentally-friendlyproducts. Whenever you see the
Green logo, you’ll know thatyou’re choosing a product that isproven to be less wasteful and less toxic than mainstreamproducts.
Guards Traffic Safety
433
Dixie® Column ProtectorsGuard against direct hits to your columns and beams with theseoctagon protectors. 100% polyethylene protectors are rust-proofand UV protected. Protectors are capable of handling a hit from upto a 7,000 lb. forklift at 6 miles per hour. Units can be assembled in
5 minutes using the included nylon fasteners. Pup ColumnProtectors offer a low profile and allow fire extinguishers to be hungon columns at the height required by OSHA. We also offer a full lineof Column Protectors made of 100% recycled plastic. This product will ship separately, direct from the manufacturer.
Slim Column Protector
Standard Column Protector Large Column Protector
Pup Column Protector
Pup Column Protector, 24"H X 24" Dia., 28 lbs. Slim Column Protector, 42"H X 12" Dia., 18 lbs.Standard Yellow Recycled Green Standard Yellow Recycled Green
Fits 6" X 6" Column 12916 13067 Fits 3" X 3" Column 12765 13072Fits 8" X 8" Column 12917 13068 Fits 4" X 4" Column 12766 13073Fits 10" X 10" Column 12918 13069 Fits 5" X 5" Column 12767 13074Fits 12" X 12" Column 12919 13070 Fits 6" X 6" Column 12768 13075
Bollard Posts and Machine GuardsProtect your facility and prevent damage from vehicles. 1⁄4" thicksteel Bollard Posts are coated in safety yellow for the highest visibility. Polyethylene post caps can be removed to fill posts withconcrete for extra protection. Machine Guards create a barrierbetween traffic areas and your valuable machinery. All featurepre-drilled 3⁄8" steel plates for easy installation. This product willship separately, direct from the manufacturer.
Protect both your vehicles and posts fromimpact damage. These highly visible, molded polyethylene sleevesresist fading, rusting and cracking, so your old posts will look likenew. Sleeve length can be trimmed for an exact fit. This product willship separately, direct from the manufacturer.
Stanchionsand Chains
Cost Effective TrafficManagementIdeal for crowd control or directing foot traffic away from
hazards. 41" tallStanchions and Chain can be assembled anddisassembled quickly.Weather-resistant plasticcannot rust or corrode.
Polyethylene chain stands up tothe toughest conditions.
Easy ChainInstallation
Base can befilled with
sand for extrastability.
Traffic Safety Guards/Chain Barriers
Column ProtectorsProtect columns and beams in your factory or warehouse with these100% high-density polyethylene protectors. Two halves attach witheasy-to-install Velcro straps. Choose from four sizes designed to fiteither round or square supports from 6" – 12". Protectors measure24"L X 24"W X 42"H and weigh 40 lbs. This product will ship separately, direct from the manufacturer.
Safety MirrorsReduce dangerous collisions and costly accidents inyour workplace. Indoor Dome Mirrors are made oflightweight acrylic and feature multi-directional viewingfor wider coverage. Indoor Convex Mirrors feature ahardboard backing with a secure vinyl edge. OutdoorConvex Mirrors have a high impact ABS plastic backingwith a weatherproof vinyl-coated aluminum lock edge.Rounded Rectangular Indoor Glass Mirrors aredesigned for low ceiling applications. All units come withmounting bracket or spring. Anchors not included.16077, 16078, 16079, 16082, 16083, 16084, 16090,16091, 16092, 16097, 16098, 16103 and 16104 willship separately, direct from the manufacturer.