KN Parts Cross Reference Catalogue - Turbine Components components list.pdf · 4519: Introduction of LP turbine blades with revised serration differential pitching. AvGG-516: 4543

Issue: 4 Page 1 of 18

KN Part No Part Description Standard Cooled / Uncooled O.E.M Equivalent O.E.M mat spec Kite mat spec Mod's Modification Description Engine Section Quantity per Engine AvGG No. MK.

KN3601 Avon HP Turbine Blade 1534 & 1535 Cooled AG58880A Inconel 738 LC Inconel 738 LC 3997 Repositioned Cooling Holes AvGG-268

4116 Cast in Inco 738 & Pack Aluminised (Replacing Nimonic 115 Forging) AvGG-365

4180 Brazing of Sealing Plates to Blade Roots AvGG-394

4295 Hot Isostatic Pressure Treatment, After Casting Prior Machining AvGG-450

4391 Intro of Reduced Root Platform Widths AvGG-469

4435 HP turbine blades (INCO 738) with revised firtree rootserration tolerances. AvGG-476

4471 Addition of Super Polishing Rework AvGG-487

4541 HP turbine blade with CM64 hardface weld andSermaloy ‘J’ coating. AvGG-530

KN4601 Avon HP Turbine Blade 1533 Non-Cooled AG58882A Inconel 792 Inconel 738 LC* 4180 Brazing of Sealing Plates to Blade Roots AvGG-394

4295 Hot Isostatic Pressure Treatment, After Casting Prior Machining AvGG-450

4391 Intro of Reduced Root Platform Widths AvGG-469

4435 HP turbine blades (INCO 738) with revised firtree rootserration tolerances. AvGG-476

4471 Addition of Super Polishing Rework AvGG-487

4541 HP turbine blade with CM64 hard face weld andSermaloy ‘J’ coating. AvGG-530

* Material Improvement, higher spec material as per KN3601 -

KN3602 Avon IP Turbine Blade 1533, 1534 & 1535 Non-Cooled AG58878A Nimonic 115 Nimonic 115 3608 IP turbine blades with increased blending radius attrailing edge achieved by 0.065” cut back. AvGG-140


4488 Super Polishing of Turbine Blades AvGG-493

4517 Introduction of IP turbine blades with revised serration AvGG-514

4542 IP turbine blade with CM64 hard face weld andSermaloy ‘J’ coating. AvGG-531

KN3603 Avon LP Turbine Blade 1533, 1534 & 1535 Non-Cooled AG58876A Nimonic 105 Nimonic 105 3365 LP turbine blades with increased blending radius attrailing edge. AvGG-318


4488 Super Polishing of Turbine Blades AvGG-493

4519 Introduction of LP turbine blades with revised serrationdifferential pitching. AvGG-516

4543 LP turbine blade with CM64 hard face weld andSermaloy ‘J’ coating. AvGG-532

83

IP TURBINE ROTOR BLADES:The Kite manufactured Avon IP turbine rotor blades are equivalent to the latest OEM modification standard of blade, AG58878A, and are completely interchangeable with existing OEM blades, although it is recommended that they be fitted as a complete set.

Featuring Sermaloy J diffusion coating to maximise blade corrosion resistance and CM64 hard face welding on the blade outer shroud abutment faces to minimise frettage.

LP TURBINE ROTOR BLADES:The Kite manufactured Avon LP turbine rotor blades are equivalent to the latest OEM modification standard of blade, AG58876A, and are completely interchangeable with existing OEM blades, although it is recommended that they be fitted as a complete set.

Featuring Sermaloy J diffusion coating to maximise blade corrosion resistance and CM64 hard face welding on the blade outer shroud abutment faces to minimise frettage.

Turbine (1-15)

71Turbine (1-15)

Turbine (1-15) 59

KN Parts Cross Reference Catalogue - Turbine Components

All 1534 & 1535 submark variants.

PENDING RELEASE - CONTACT SALES TEAM

83

All 1533 submark variants.

All 1533, 1534 & 1535 submark

variants.

All 1533, 1534 & 1535 submark

variants.

Turbine (1-15)

HP TURBINE ROTOR BLADES:The Kite manufactured Avon HP turbine rotor blades are available in both un-cooled (1533 use only) and cooled (1534/35 use only) configurations.

Both types are equivalent to the latest modification OEM standard of blade, AG58880A (1534/35 blades) and AG58882A (1533 blades), and are completely interchangeable with existing OEM blades, although it is recommended that they be fitted as a complete set. Featuring Sermaloy J diffusion coating to maximise blade corrosion resistance and CM64 hard face welding on the blade outer shroud abutment faces to minimise frettage.


KN4061 Cup Washer 1533, 1534 & 1535 - BR7842 MSRR6522 S347

KN4126 Avon IP Nozzle Guide Vane 2 Vane Assembly

1533, 1534, 1535 (See MK Column) Cooled AG58922A Inconel 738 LC Inconel 738 LC 2740 Revised Group Welding of IP NGV's AvGG-12

4473 IP NGV's in Inconel 738 - Increased Creep Resistance AvGG-491

4539 High Non-conformance During Vacuum Braze Cycle Due to Weld Cracks in Inconel 738 AvGG-529

4544 Introduction of Sermaloy J Coating for Improved Corrosion Protection AvGG-533

4592 Introduction of revised IP NGV's with Cut Back Outer Shrouds -


1533, 1534, 1535 (See MK Column) Cooled AG58923A Inconel 738 LC Inconel 738 LC 2740 Revised Group Welding of IP NGV's AvGG-12

4473 IP NGV's in Inconel 738 - Increased Creep Resistance AvGG-491

4539 High Non-conformance During Vacuum Braze Cycle Due to Weld Cracks in Inconel 738 AvGG-529



TURBINE CUP WASHERS:KITE Turbine Cup-washers are an alternative component designed to replace the commonly rejected OEM cup washers.

TURBINE IP / LP NOZZLE GUIDE VANES:The Kite manufactured Avon NGV's are equivalent to the latest OEM modification blade standard with all vane types completely interchangeable with existing OEM blades, although it is recommneded that they are fitted as a complete set.

HP Vanes are available in 3 types with throat area's to suit 1533, 1534 and 1535 engine marks.Featuring Sermaloy J diffusion coating to maximise blade corrosion resistance and with both IP and LP Vanes manufactured from Inconel 738 to offer improved creep resistance.

It is critical that mark suitability is noted in selection of vane type.


-


1 ( + 29 doubles)

All 1533, 1534 & 1535 submark

variants.-1Various-

Turbine (1-12) 29 ( + 1 triple)

All 1533, 1534 submark variants.1535: 121, 122 &

130 ONLY

All 1533, 1534 submark variants.1535: 121, 122 &

130 ONLY

Turbine



1535* (See MK Column) Uncooled AG59246A Inconel 738 LC Inconel 738 LC 2740 Revised Group Welding of IP NGV's AvGG-12




1535* (See MK Column) Uncooled AG59247A Inconel 738 LC Inconel 738 LC 2740 Revised Group Welding of IP NGV's AvGG-12



KN4140 Avon LP Nozzle Guide Vane 2 Vane Assembly 1533, 1534 & 1535 Uncooled AG58950A Inconel 738LC Inconel 738LC 4473 IP Nozzle Guide Vanes - Improved Creep Resistance AvGG-491

4546 Introduction of Sermaloy J for Improved Corrosion Protection AvGG-535

KN4141 Avon LP Nozzle Guide Vane 3 Vane Assembly 1533, 1534 & 1535 Uncooled AG58951A Inconel 738LC Inconel 738LC 4473 IP Nozzle Guide Vanes - Improved Creep Resistance AvGG-491

4546 Introduction of Sermaloy J for Improved Corrosion Protection AvGG-535

25 ( + 1 triple)


29 ( + 1 triple)

1 ( + 29 doubles)


1535: 161, 162, 170, 171, 175

ONLYTurbine

1535: 161, 162, 170, 171, 175

ONLYTurbine



Turbine (1-12)All 1533, 1534 & 1535 submark

variants.

Turbine (1-12)All 1533, 1534 & 1535 submark

variants.

1 ( + 25 doubles)


KN4205 Type A

Avon HP Nozzle Guide Vane 2 Vane Assembly 1535 Cooled AG58932 X40 X40 3526 Intro of Chromium Carbide Coating on Locating Lips AvGG-113

4179 HP NGV's Produced in X40 with Improved Cooling Features AvGG-392

4374 Commonisation of flame Plated HP NGV's for All Marks of 1533 & 1534 AvGG-473

4490 Commonisation of Super Polished Nozzle Guide Vanes AvGG-500

4491 HP NGV's with Increased Throat Gap Area AvGG-501

4545 Introduction of Sermaloy J Coating for Improved Corrosion Resistance AvGG-534

KN4205 Type B





KN4205 Type C



4456 Improved Performance Package for Industrial Avon Type 1533 AvGG-480



KN4206 Type A

Avon HP Nozzle Guide Vane 3 Vane Assembly 1535 Cooled AG58933A X-40 X40 3526 Intro of Chromium Carbide Coating on Locating Lips AvGG-113


4374 Commonisation of flame Plated HP NGV's for All Marks of 1533 & 1534 AvGG-473


4491 HP NGV's with Increased Throat Gap Area AvGG-501


KN4206 Type B

Avon HP Nozzle Guide Vane 3 Vane Assembly 1534 Cooled AG58935 X-40 X40 3526 Intro of Chromium Carbide Coating on Locating Lips AvGG-113




TURBINE HP NOZZLE GUIDE VANES:The Kite manufactured Avon HP Nozzle Guide Vane (NGV) is equivalent to an OEM manufactured Avon HP NGV at modification standard 4545 – part number AG58932/AG58933A.

All types are fully interchangeable although it is recommneded that they are fitted as a complete set.Features include modification 4545 standard silicon modified aluminide coating (Sermaloy J) to the gas washed surfaces and modification 3526 standard chromium carbide coating on the discharge nozzle locating lips.

28 ( + 1 triple)

28 ( + 1 triple)

Turbine (1-12) 28 ( + 1 triple) All 1535 submark variants.

PENDING RELEASE - CONTACT SALES TEAMTurbine (1-12) All 1534 submark

variants.

Turbine (1-12) All 1533 submark variants.

All 1535 submark variants.Turbine (1-12)


All 1534 submark variants.Turbine

1 ( + 28 doubles)

1 ( + 28 doubles)PENDING RELEASE - CONTACT SALES TEAM



KN4206 Type C

Avon HP Nozzle Guide Vane 3 Vane Assembly 1533 Cooled AG58937 C242 X40** 3526 Intro of Chromium Carbide Coating on Locating Lips AvGG-113



** Material Improvement, higher spec material as per KN4206 Type A&B

KN3477Thermocouple HarnessPENDING RELEASE -

CONTACT SALES TEAMAll Marks - - Various Various - - Turbine 1 All Marks

KN3634, KN3634-1, KN3634-2, KN3634-3

Exhaust Cone Locating Sleeve (Nominal, 0.010" O/S, 0.020"

O/S, 0.030" O/S)PENDING RELEASE -

CONTACT SALES TEAM

All Marks - BA83939, BA41538, BA41539, BA41540 Nimonic 80a Nimonic 80a - - Turbine / Exhaust 3 All Marks

3804 Rear Roller Bearing with cage bar inner corners radiused AvGG-2074299 Rear Roller Bearing cage bore lead indium plated4521 Rear Roller Bearing cage bore silver plated

ARS.3357 Reclaim sleeve by grinding bearing track undersize

All Marks

THERMOCOUPLE HARNESS:The Kite manufactured Thermocouple Harness is a direct equivalent to an OEM manufactured assembly, and is fully interchangeable, being easily changed on site with no control system retrofit required.

Featuring 8 individual thermocouples for recording T4 station (ECT) on the engine for control of engine top temperature limit and for recording ECT spread.

EXHAUST CONE LOCATING SLEEVE BUSH:The Kite manufactured Bush is a direct equivalent to an OEM manufactured component, and is fully interchangeable, although some machining may be required to specific assemblies to ensure correct fit within the exhaust unit.

This bush provides a sliding fit between the exhaust unit inner cone and outer cone and on request are available to oversize dimensions to suit the outer cone bore.

TURBINE REAR BEARING:The Kite manufactured Rear bearing, supporting the rear of the turbine shaft in the bearing housing, is a direct equivalent to an OEM manufactured component, and is fully interchangeable, however bearings (either nominal or oversize) must be fitted with the same type of inner race (Turbine Sleeve), for assistance contact KITE

Turbines.It is a standard roller element bearing available in 2 types, nominal and 0.010" undersize.

It is a regular replacement component due to scoring on the Rear Bearing Inner Race (Turbine Sleeve).

The Kite manufactured Rear Bearing Inner Race Turbine Sleeve, is a direct equivalent to an OEM manufactured component, and is fully interchangeable, however sleeves (either nominal or undersize) must be fitted with the same type of Rear Roller Bearing, for assistance contact KITE Turbines.The sleeve comes in 2 types, nominal and 0.010" undersize to mate with the appropriate bearing type.

To extend the sleeve life it can be ground 0.010" undersize and a matching bearing fitted to suit.

KN4085, KN4116

Rear Bearing Assy (Nominal, 0.010" Undersize) All Marks - AG58679, AG58680 Various Various 1Turbine

All 1533 submark variants.Turbine 1 ( + 28 doubles)



3846 Turbine sleeve with increased track diameter to reduce rear bearing clearance

4579 Introduction of revised Turbine Bearing SleeveAll MarksKN4100,

KN4119 Rear Bearing Turbine Sleeve All Marks - AG59167, AG58836 Various Various Turbine 1



KN3999 Avon Stage '00' Compressor Rotor Blade 1533, 1534 & 1535 - AG58140 MSRR 8610 MSRR 8610 3630 Stage 00 rotor blades in titanium with wheel, pins,

seals, and modified spacer to suit. AvGG-231

3827 Stage 00 rotor blades with radiused pin hole corners. AvGG-213

4002 Stage 00 rotor blades with molybdenum pads on sidefaces. AvGG-287

4500 Communisation of Compressor Rotor Blades - Improved Surface Finish AvGG-502

KN4000 Avon Stage '0' Compressor Rotor Blade 1533, 1534 & 1535 - AG57838A MSRR 8007 MSRR 8007 4249 Intro of Sermetel 'W' and Teflon Coatings, Improved Corrosion Resistance AvGG-446

4352 Re-Introduction of Tungsten Carbide Pads AvGG-452





KN4003 Avon Stage '3' Compressor Rotor Blade 1533, 1534 & 1535 -

AG58141 / AG58155 / AG58169 / AG58183

MSRR 8610 MSRR 8610 3287 Stage 3 Rotor Blades in Titanium AvGG-66

4365 Compressor rotor blades (stages 00, 3 to 15 in titaniumMSRR 8610 (TAF) (previously TAD360). AvGG-457


KN Parts Cross Reference Catalogue - Compressor Components

Compressor (1-5) 22All 1533, 1534 & 1535 submark

variants.


variants.


variants.


variants.


variants.PENDING RELEASE - CONTACT SALES TEAM

COMPRESSOR ROTOR BLADES: The KITE Turbines manufactured Compressor Rotor Blades are equivalent to the latest modification OEM manufactured blades and are completely interchangeable with OEM components.

These Aluminium blades feature tungsten carbide anti frettage pads and IP6 protective coating to OEM Mod.5010.



AG58142 / AG58156 / AG58170 / AG58184





AG58143 / AG58157 / AG58171 / AG58185





AG58144 / AG58158 / AG58172 / AG58186





AG58145 / AG58159 / AG58173 / AG58187

MSRR 8610 MSRR 8610 3489 Stage 7 & 8 Rotor Blades in Titanium AvGG-78




AG58146 / AG58160 / AG58174 / AG58188

MSRR 8610 MSRR 8610 3489 Stage 7 & 8 Rotor Blades in Titanium AvGG-78




AG58147 / AG58161 / AG58175 / AG58189

MSRR 8610 MSRR 8610 4365 Compressor rotor blades (stages 00, 3 to 15 in titaniumMSRR 8610 (TAF) (previously TAD360). AvGG-457
















AG58148 / AG58162 / AG58176 / AG58190




AG58149 / AG58163 / AG58177 / AG58191




AG58150 / AG58164 / AG58178 / AG58192




AG58151 / AG58165 / AG58179 / AG58193




AG58152 / AG58166 / AG58180 / AG58194




AG58153 / AG58167 / AG58181 / AG58195
















KN4061 Cup Washer 1533, 1534 & 1535 - BR7842 MSRR6522 S347

KN4111 / 3 Stage 1 Stator - 3 Vane Assy 1533, 1534 & 1535 - BR81283A/ BR81277A 2618 Aluminium 2618 Aluminium 3252 Stage 1 stator Blades Riveted into Quadrants & with Interference Fit in

Compressor Rings AvGG-18

4154 Stage 1 Quadrant with Inner Shroud Rivets Tack-Welded to Plates AvGG-388

4249 Introduction of Sermetel 'W' and Teflon coatings, Providing Improved Corrosion Resistance of the Compressor AvGG-446

5010 Revised Coatings for Stator Blades -

KN4111 / 4 Stage 1 Stator - 4 Vane Assy 1533, 1534 & 1535 - Various Quadrants 2618 Aluminium 2618 Aluminium 3252 Stage 1 stator Blades Riveted into Quadrants & with Interference Fit in Compressor Rings AvGG-18

4154 Stage 1 Quadrant with Inner Shroud Rivets Tack-Welded to Plates AvGG-388

4249 Introduction of Sermetel 'W' and Teflon coatings, Providing Improved Corrosion Resistance of the Compressor AvGG-446


KN4112 / 3 Stage 2 Stator - 3 Vane Assy 1533, 1534 & 1535 - AG59760A 2618 Aluminium 2618 Aluminium 4249 Introduction of Sermetel 'W' and Teflon coatings, Providing Improved Corrosion Resistance of the Compressor AvGG-446

5010 Revised Coatings for Stator Blades

TURBINE CUP WASHERS: KITE Turbine Cup-washers manufactured to cover commonly rejected OEM cup washers.

- Various various -



All 1533, 1534 & 1535 submark






COMPRESSOR STATOR VANES: KITE Turbine aluminium stator vanes are an alternative improved design than can replace currently OEM vanes that typically have high rejection rates during routine overhauls.

Featuring IP.6 protective coating to OEM Modification.5010 standard and matching shroud/vane geometry to the existing OEM vanes, all stages of KITE stators are completely interchangeable with existing OEM hardware. Stage 1 stators can be offered as quadrants (to OEM modification.3252 standard) or as replacement vanes 3 vane and 4 vane assemblies.


KN4112 / 3S Stage 2 Stator - 3 Vane Assy (End Stop) 1533, 1534 & 1535 - AG59762A 2618 Aluminium 2618 Aluminium 4249 Introduction of Sermetel 'W' and Teflon coatings, Providing Improved

Corrosion Resistance of the Compressor AvGG-446


KN4112 / 3OS Stage 2 Stator - 3 Vane Assy (O/S) 1533, 1534 & 1535 - AG59761A 2618 Aluminium 2618 Aluminium 4249 Introduction of Sermetel 'W' and Teflon coatings, Providing Improved

Corrosion Resistance of the Compressor AvGG-446


KN4112 / 4 Stage 2 Stator - 4 Vane Assy 1533, 1534 & 1535 - AG59763A 2618 Aluminium 2618 Aluminium 4249 Introduction of Sermetel 'W' and Teflon coatings, Providing Improved Corrosion Resistance of the Compressor AvGG-446


KN4114 / 3 Stage 4 Stator - 3 Vane Assy 1533, 1534 & 1535 - AG59769A 2618 Aluminium 2618 Aluminium 3245 Increased air bleed flow from compressor to reducestall range. AvGG-26


KN4114 / 3S Stage 4 Stator - 3 Vane Assy (End Stop) 1533, 1534 & 1535 - AG59771A 2618 Aluminium 2618 Aluminium 3245 Increased air bleed flow from compressor to reduce

stall range. AvGG-26


KN4114 / 3OS Stage 4 Stator - 3 Vane Assy (O/S) 1533, 1534 & 1535 - AG59770A 2618 Aluminium 2618 Aluminium 3245 Increased air bleed flow from compressor to reduce

stall range. AvGG-26




Compressor (1-4) 6 or as requiredAll 1533, 1534 & 1535 submark








Compressor (1-4) 14, or as requiredAll 1533, 1534 & 1535 submark



KN4114 / 4 Stage 4 Stator - 4 Vane Assy 1533, 1534 & 1535 - AG59772A 2618 Aluminium 2618 Aluminium 3245 Increased air bleed flow from compressor to reducestall range. AvGG-26


KN4124 Avon Intake Guide Vane Actuator 1533, 1534 & 1535 - AG56879A 18/8 Cr - Ni

Stainless Steel 3543 Inlet Guide Vanes with Thicker Anti-Icing Feed Tube AvGG-397

4153 Inlet Guide Vanes with Cut-Back Trailing Edge Tip AvGG-397

4006 Inlet Guide Vanes with Flame Plated Pivots & Trunnion Pins AvGG-331

KN4125 Avon Intake Vane Follower 1533, 1534 & 1535 - AG56878A 18/8 Cr - Ni

Stainless Steel 3543 Inlet Guide Vanes with Thicker Anti-Icing Feed Tube AvGG-397

4153 Inlet Guide Vanes with Cut-Back Trailing Edge Tip AvGG-397

4006 Inlet Guide Vanes with Flame Plated Pivots & Trunnion Pins AvGG-331

3915 Repositioning of IGV Split Bushes AvGG-2424006 Inlet Guide Vanes with flame plated pivots and trunnion pins -

4120 Re-introduction of Glacier Bushes

3915 Repositioning of IGV Split Bushes AvGG-2424006 Inlet Guide Vanes with flame plated pivots and trunnion pins -

4120 Re-introduction of Glacier Bushes

KN4078Actuating Ring - IGV'sPENDING RELEASE -

CONTACT SALES TEAMAll Marks - BR62907 Alu Alu - - Compressor (1-2) 1 All Marks

KN4084Front Bearing Assy


All Marks - BA52827 Various Various - - Compressor (1-2) 1 All Marks

KN3581Front Bearing Outer Race


All Marks - BA26460 Various Various - - Compressor (1-2) 1 All Marks

INLET GUIDE VANES: The Kite manufactured Avon Intake Guide Vanes (IGV) are equivalent to the OEM manufactured Avon Intake Guide Vanes at modification standard 4153.

All stages of stator vanes are completely interchangeable with existing OEM components.

ACTUATING IGV BUSHES: The Kite manufactured Aluminium bushes are direct equivalents to an OEM manufactured assemblies, and are fully interchangeable.

These aluminium bushes come with Glacier DU liners providing friction and wear resistance to the outer journal of the Inlet Guide Vanes.

IGV ACTUATING RINGS: The Kite manufactured Actuating rings (for variable geometry)are direct equivalents to an OEM manufactured components, and are fully interchangeable.

Note: standard OEM components are prone to wear on the trunnion locations and require regular replacement.

FRONT BEARING: The Kite manufactured Front bearing assembly and outer race, supporting the front of the compressor shaft in the inlet casing, is a direct equivalent to an OEM manufactured component, and is fully interchangeable.

It is a standard roller element bearing. Outer Race is secured into the Front Bearing Housing (1-2) and is generally considered a consumable due to it being prone to scoring of bearing track in service.





19Various All Marks

Compressor (1-2)

All Marks

KN3460Bush - Follower IGV


All Marks - AG55479A Various

KN3459Bush - Actuating IGV


All Marks - AG55478A Various Various


variants.

4



KN3725Avon Strip Assembly - Channel, Flame Tube

(Trident Channel)1533, 1534 & 1535 - AG12368A

Nimonic 75 18/8 Cr-Ni Stainless

Steel3750 Flame tube baffles and mating surfaces coated with

tungsten carbide instead of chromium carbide. AvGG-205

Position Single Dish Triple Dish Swirler Burner Low Nox

1,5,7 KN3849 KN3855 KN4193 KN4087

2,4,8 KN3850 KN3856 KN4195 KN4088

3 KN3851 KN3857 KN4194 KN4089

6 KN3852 KN3858 KN4196 KN4090

KN3849 Avon Single Dish Flame Tube Position 1, 5 & 7 1533 - AG59457 Nimonic 75

18/8 Cr-Ni SS 3438 Flame tubes, burner snouts and burner primary nozzlesmodified to reduce density of exhaust gases. AvGG-77

3466 Flame Tube Front Flange Location Dia's with Tungsten Carbide Coating AvGG-64

3527 Flame Tubes with Outer & Side Baffles in Nimonic 75 -

3545 Combustion Equipment – Flame tubes with louveredcooling holes and additional drain holes in front section. AvGG-115

3557 Flame Tubes with Hooded Overlapping Interconnectors AvGG-123

3750 Flame Tube Baffles & Mating Surfaces Coated with Tungsten Carbide AvGG-205

3876 Improved Anti-smoke and Latest Design Features for Long Life Application AvGG-336

4079 Flame tube rear baffles secured by welded bridgepieces instead of bolted brackets. AvGG-343

4405 Re-designed Bridging Unit & Flame Tube Rear Baffle with Thickened, Overlapping Corner Plates AvGG-468

4478 Single Dish Flame Tubes with Thickened Rear Section & Baffles AvGG-490

4576 Re-dimensional Flame Tubes Conforming with GG Location Dimensions AvGG-548

4601 Removal of TBC from Single Dish Flame Tubes -

KN Parts Cross Reference Catalogue - Combustion Components

FLAME TUBE CHANNEL:The Kite manufactured channel assembly (Trident channel) is equivalent to OEM part number AG12368A and is completely interchangeable with existing hardware. Featuring a tungsten carbide coating to reduce frettage between flame tube baffles and channel mating faces.

FLAME TUBES:The Kite manufactured flame tubes are available as single dish (1533 only), triple disc (1534/35 only), Low NOx (all marks) and swirler burner (all marks) configurations.

Incorporating the latest modifications offered by the OEM, Kite flame tubes are completely interchangeable with existing OEM hardware and can be fitted as individual cans or as a complete set. Featuring thermal barrier coating to reduce thermal stress and Tungsten Carbide on location diameters and mating faces to reduce frettage.

Single Dish - Mark 1533Triple Dish - Mark 1534/1535Swirler Burner - All Marks*

Low NOx - All Marks*

*Fitment of swirler burner and low NOx tubes may require additional hardware changes, contact Kite Turbines for assistance.

Combustion (1-16) 3 All 1533 submark variants.

Combustion (1-16) 8All 1533, 1534 & 1535 submark

variants.


KN3850 Avon Single Dish Flame Tube Position 2, 4 & 8 1533 - AG59459 Nimonic 75












KN3851 Avon Single Dish Flame Tube Position 3 1533 - AG59458 Nimonic 75













KN3852 Avon Single Dish Flame Tube Position 6 1533 - AG59460 Nimonic 75












KN3855 Avon Triple Dish Flame Tube Position 1, 5 & 7 1534 & 1535 - AG59059 Nimonic 75 & 263

18/8 Cr-Ni SS 3466 Flame Tube Front Flange Location Dia's with Tungsten Carbide Coating AvGG-64






4121 Improved cooling of triple-dished flare flame tubeinterconnectors. AvGG-377

4254 Rework of Flame Tubes to an Improved Standard AvGG-424

4263 Flame Tubes with C.263 Heads & Ceramic Flares plus Single Entry Snouts AvGG-435


4448 New Machined Cooling Ring & extended Ceramic Coating AvGG-485




Combustion (1-16) 3 All 1534 & 1535 submark variants.



KN3856 Avon Triple Dish Flame Tube Position 2, 4 & 8 1534 & 1535 - AG59061 Nimonic 75 & 263












KN3857 Avon Triple Dish Flame Tube Position 3 1534 & 1535 - AG59060 Nimonic 75 & 263












KN3858 Avon Triple Dish Flame Tube Position 6 1534 & 1535 - AG59062 Nimonic 75 & 263
















KN4087 Low NOx

Avon Triple Dish Flame Tube Position 1, 5 & 7 1535 - AG59075A Nimonic 75 & 263











4476 Flame Tube Low Emission With Thickened Baffles, Corner Plates & Thermal Barrier Coating AvGG-495


4577 Flame Tube Rear Baffle Re-dimensional & Offset From Baffle AvGG-550

4578 Flame Tube Rear Baffle Build - Low NOx -

KN4088 Low NOx

Avon Triple Dish Flame Tube Position 2, 4 & 8 1535 - AG59077A Nimonic 75 & 263














KN4089 Low NOx

Avon Triple Dish Flame Tube, Position 3 1535 - AG49076A Nimonic 75 & 263















Combustion (1-16) 3 All 1535 submark variants.PENDING RELEASE - CONTACT SALES TEAM




KN4090 Low NOx

Avon Triple Dish Flame Tube Position 6 1535 - AG59078A Nimonic 75 & 263














KN4193 Avon Swirler Burner Flame Tube Position 1, 5 & 7 1534 & 1535 - AG100173 Nimonic 75 & 263











5015 Additional TBC to Flame Tube Inter-connector SectionCategory – ‘B’ New Production, ‘CR’ In Service -

5026 Additional TBC to Flame Tube Third SectionCategory – ‘B’ New Production, ‘CR’ In Service -

KN4194 Avon Swirler Burner Flame Tube, Position 3 1534 & 1535 - AG100175 Nimonic 75 & 263














Combustion (1-16) 1 All 1534 & 1535 submark variants.PENDING RELEASE - CONTACT SALES TEAM



KN4195 Avon Swirler Burner Flame Tube, Position 2, 4 & 8 1534 & 1535 - AG100174 Nimonic 75 & 263












KN4196 Avon Swirler Burner Flame Tube, Position 6 1534 & 1535 - AG100176 Nimonic 75 & 263












KN3859 Avon Discharge Nozzle 1533, 1534 & 1535 - AG59132A *** Nimonic 263 - *** Assembly of various materials: Haynes 188, Stellite 31 & Nimonic 75 -

3402 Front Locating Tongue Increased Interference in Supporting Segment Groove AvGG-27

3526 Front Flanges Bolted to Inner Cone & Chromium Carbide Coating on Internal Location Faces of Rear Flange AvGG-113

3554 Discharge Nozzles Front Flanges Bolted to Inner Cone AvGG-103

3555 Inner Support Bracket Welded Boss Replaced by Self-Locking Nut AvGG-114

3604 Discharge nozzles bolted together at rear flanges. AvGG-112

4374 Commonisation all Flame Plated Discharge Nozzles for all marks 1533 1534 AvGG-473

4566 Introduction of Revised Discharge Nozzle AvGG-545

KT Mod 20360 Thermal Barrier Coating to Internal Surface of Discharge Nozzle -

KN3427

Flame Tube Bridge Piece (Cooper Beam)


All Marks - AG58057 Nimonic 263 4405 Introduction of re-designed bridging unit 8 - All Marks

KN3495

Flame Tube Bridge Piece (Cooper Beam) - ARS.3718


All Marks - AG58389 Nimonic 75 ARS.3718 Replacement of bridging unit 8 All Marks

FLAME TUBE BRIDGE PIECE:The Kite manufactured Bridge pieces are direct equivalents to an OEM manufactured assemblies, and are fully interchangeable. The Bridge pieces secure the flame tubes to each other and reduce frettage across the rear baffles.

Bridge pieces are consumable and are cut during removal. Once cut existing pieces can be dressed back and KN3495 welded on top of the old piece to re-bridge.

Combustion (1-12) 8All 1533, 1534 & 1535 submark

variants.




DISCHARGE NOZZLES:The Kite Turbines Avon Discharge Nozzle is similar to an OEM manufactured Avon Discharge Nozzle, part number AG59132A, however incorporates various design improvements.

In addition to featuring the latest modifications from the OEM, it incorporates an alternative design of front and rear retaining bracket which greatly improves the strength of the brackets and minimises fatigue cracking. This bracket design improvement can also be applied to existing OEM nozzles on request.There is a minor interchangeability impact due to this bracket re-design, requiring changeout to be by complete set, rather than being able to install individual Kite nozzles with existing OEM versions.

KN Parts Cross Reference Catalogue - Turbine Components components list.pdf · 4519: Introduction of LP turbine blades with revised serration differential pitching. AvGG-516: 4543

Documents