Page 1
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
Karsten Schmidt D-52156 Monschau - Eschbachstrasse 26
St-Nr 202/5364/1099 USt-IdNr. DE259765286
Raiffeisenbank Simmerath BLZ 370 696 42
KTO 370 414 60 18
Tel +49(0)1714455016 Fax +49(0)171134455016 Mail [email protected]
KMS MAZATROL EXPORT FOR
ADDON: PLANES
Page 2
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
2
Table of contents
1. Vertical milling center _____________________________________________ 3
2. Horizontal milling center ___________________________________________ 4
3. Variaxis milling center _____________________________________________ 5
4. Lathe / Integrex / Integrex-E/J Bar working _________________________ 6
5. Lathe / Integrex C/Y-axis milling plane XC/XY _______________________ 7
6. Integrex-E/J C-axis milling plane FACE ______________________________ 7
7. Integrex-E/J milling, B-axis = 0° ___________________________________ 7
8. Lathe / Integrex C-axis milling plane ZC ____________________________ 8
9. Integrex-E/J C-axis milling plane Cylinder __________________________ 8
10. Lathe / Integrex Y-axis milling plane ZY ____________________________ 9
11. Integrex-E/J milling, B-axis 90° ____________________________________ 9
12. Integrex C-axis drilling plane /C __________________________________ 10
13. Integrex-E/J C-axis drilling plane Slant ___________________________ 10
14. Integrex Y-axis milling plane /Y ___________________________________ 11
15. Integrex-E/J milling, B-axis > 0° __________________________________ 11
Page 3
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
3
1. Vertical milling center
C-plane top, resp. parallel to the surface, on which should be worked
In the plane: X right, Y top, Z out of the surface
Page 4
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
4
2. Horizontal milling center
C-plane parallel to the surface, on which should be worked
In the plane: X right, Y top, Z out of the surface
A rotation around WKS Z you get as Index cycle
Page 5
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
5
3. Variaxis milling center
C-plane parallel to the surface, on which should be worked
In the plane: X right, Y top, Z out of the surface
A rotation around WKS Z you get as Index cycle C-axis, a rotation around WKS X you get as Index cycle A-axis
Page 6
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
6
4. Lathe / Integrex / Integrex-E/J Bar working
C-plane top
In the plane: X right, Y top, Z out of the surface
Page 7
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
7
5. Lathe / Integrex C/Y-axis milling plane XC/XY
6. Integrex-E/J C-axis milling plane FACE
7. Integrex-E/J milling, B-axis = 0°
C-plane right
In the plane: X right, Y top, Z out of the surface
Page 8
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
8
8. Lathe / Integrex C-axis milling plane ZC
9. Integrex-E/J C-axis milling plane Cylinder
C-plane top, geometry as wind up on correct Z-depth
In the plane: X right, Y top, Z out of the surface
Page 9
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
9
10. Lathe / Integrex Y-axis milling plane ZY
11. Integrex-E/J milling, B-axis 90°
C-plane parallel to the surface, on which should be worked
In the plane: X right, Y top, Z out of the surface
A rotation around WKS X you get as C-axis
Page 10
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
10
12. Integrex C-axis drilling plane /C
13. Integrex-E/J C-axis drilling plane Slant
C-plane top
B-axis will be asked, a rotation around WKS X you get as C-axis
In the plane: X right, Y top, Z out of the surface
Page 11
CNC-networking | CNC-programming | Mazatrol | software-solutions | CAM-systems
KMS customer-friendly-Mazatrol-software
11
14. Integrex Y-axis milling plane /Y
15. Integrex-E/J milling, B-axis > 0°
C-plane parallel to the surface, on which should be worked
In the plane: X right, Y top, Z out of the surface
For the origin will be asked
A rotation around WKS X you get as C-axis, a rotation around WKS Y you get as B-axis