This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 29 Color - Digital Production
Systel Business Equipment Co., Inc KM AccurioPress C3070Attention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
MAINTENANCE: KMC30701YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 420,000 Copies Annually, Overage Fee of .0055 mono, .0420 Color $ 1,848.00 154.00$ 154.00$ 154.00$
Total Order
KM AccurioPress C3070 Notes:
5RU-510 is required with a GP-501, as well as
12Required for Plockmatic, Watkiss and GBC PUNCH G2.
7SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher8CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-5139CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51310CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51311LS-506 ships with one LC-501 cart.
1 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included2GBC PUNCH G2 requires 2 MK-732s to install as well as at least one DIE set. Item numbers for Die sets for the PUNCH G2 start with 771XXXX and the description starts with DIE, ... Please note these are different from the GP-501 die sets.36MK-732 Mount Kit Required for attachment of PI-502 Post Inserter to FS-532 Finisher.4Must order at least one binding element (RB-101) with each GP-502. Combination of GP-502 and IQ-501 is not possible with AccurioPress 6136/6136P/6120.
6HT-511 is the dehumidifying heater for the main engine paper trays. It is recommended for customers who plan to run coated stocks and/or operate in humid environments.
18FA-502 is needed when connecting more than one paper feed, 1 is needed for 2 PFUs, 2 are needed for 3 PFUs19MK-740 is compatible with OT-510, OT-511, FS-531, FS-612 and FS-532
13SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher14IQ-501 is strongly recommended in most configurations for color and front to back registration quality and consistency. For AccurioPress 6136/6136P/6120 the RU-518 and VI-512 are required.15Depending on the engine it is attached to, the RU-518 may be required for banner printing and with some finishers. Check the Spec and Install Guide or Service Manual for exact configurations.16HT-503 is recommended for customers who plan to run coated stocks and/or operate in humid environments.17HT-506 is recommended for customers who plan to run coated stocks and/or operate in humid environments.
MAINTENANCE: KMC3070L1YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 420,000 Copies Annually, Overage Fee of .0055 mono, .0420 Color $ 1,848.00 154.00$ 154.00$ 154.00$
Total Order
KM AccurioPress C3070L Notes:
3HT-503 is recommended for customers who plan to run coated stocks and/or operate in humid environments.4MK-740 is compatible with OT-510, OT-511, FS-531, FS-612 and FS-532
1AccurioPrint C3070L is now engine only. A print controller (either IC-605A or IC-417 with VI-509) needs to be added.2HT-511 is the dehumidifying heater for the main engine paper trays. It is recommended for customers who plan to run coated stocks and/or operate in humid environments.
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 29 Color - Digital Production
Systel Business Equipment Co., Inc KM AccurioPress C3080Attention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
MAINTENANCE: KMC30801YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 420,000 Copies Annually, Overage Fee of .0055 mono, .0420 Color $ 1,848.00 154.00$ 154.00$ 154.00$
Total Order
KM AccurioPress C3080 Notes:
1 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included2GBC PUNCH G2 requires 2 MK-732s to install as well as at least one DIE set. Item numbers for Die sets for the PUNCH G2 start with 771XXXX and the description starts with DIE, ... Please note these are different from the GP-501 die sets.36MK-732 Mount Kit Required for attachment of PI-502 Post Inserter to FS-532 Finisher.4Must order at least one binding element (RB-101) with each GP-502. Combination of GP-502 and IQ-501 is not possible with AccurioPress 6136/6136P/6120.5RU-510 is required with a GP-501, as well as all configurations for AccurioPress 6136/6136P/6120.6HT-511 is the dehumidifying heater for the main engine paper trays. It is recommended for customers who plan to run coated stocks and/or operate in humid environments.7SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher8CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-513
15Depending on the engine it is attached to, the RU-518 may be required for banner printing and with some finishers. Check the Spec and Install Guide or Service Manual for exact configurations.16HT-503 is recommended for customers who plan to run coated stocks and/or operate in humid environments.17HT-506 is recommended for customers who plan to run coated stocks and/or operate in humid environments.18FA-502 is needed when connecting more than one paper feed, 1 is needed for 2 PFUs, 2 are needed for 3 PFUs19MK-740 is compatible with OT-510, OT-511, FS-531, FS-612 and FS-532
9CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51310CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51311LS-506 ships with one LC-501 cart.
13SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher14IQ-501 is strongly recommended in most configurations for color and front to back registration quality and consistency. For AccurioPress 6136/6136P/6120 the RU-518 and VI-512 are required.
12Required for Plockmatic, Watkiss and GBC PUNCH G2.
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 29 Color - Digital Production
Systel Business Equipment Co., Inc KM AccurioPress C3080PAttention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
MAINTENANCE: KMC3080P1YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 420,000 Copies Annually, Overage Fee of .0055 mono, .0420 Color $ 1,848.00 154.00$ 154.00$ 154.00$
Total Order
KM AccurioPress C3080P Notes:
12Required for Plockmatic, Watkiss and GBC PUNCH G2.
1 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included2GBC PUNCH G2 requires 2 MK-732s to install as well as at least one DIE set. Item numbers for Die sets for the PUNCH G2 start with 771XXXX and the description starts with DIE, ... Please note these are different from the GP-501 36MK-732 Mount Kit Required for attachment of PI-502 Post Inserter to FS-532 Finisher.4Must order at least one binding element (RB-101) with each GP-502. Combination of GP-502 and IQ-501 is not possible with AccurioPress 6136/6136P/6120.5RU-510 is required with a GP-501, as well as all configurations for AccurioPress 6136/6136P/6120.6HT-511 is the dehumidifying heater for the main engine paper trays. It is recommended for customers who plan to run coated stocks and/or operate in humid environments.7SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher8CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-5139CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51310CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51311LS-506 ships with one LC-501 cart.
19MK-740 is compatible with OT-510, OT-511, FS-531, FS-612 and FS-532
13SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher14IQ-501 is strongly recommended in most configurations for color and front to back registration quality and consistency. For AccurioPress 6136/6136P/6120 the RU-518 and VI-512 are required.15Depending on the engine it is attached to, the RU-518 may be required for banner printing and with some finishers. Check the Spec and Install Guide or Service Manual for exact configurations.16HT-503 is recommended for customers who plan to run coated stocks and/or operate in humid environments.17HT-506 is recommended for customers who plan to run coated stocks and/or operate in humid environments.18FA-502 is needed when connecting more than one paper feed, 1 is needed for 2 PFUs, 2 are needed for 3 PFUs
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 29 Color - Digital Production
Systel Business Equipment Co., Inc KM AccurioPress C6085Attention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
MAINTENANCE: KMC60851YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 420,000 Copies Annually, Overage Fee of .0055 mono, .0420 Color $ 1,848.00 154.00$ 154.00$ 154.00$
Total Order
KM AccurioPress C6085 Notes:
29VI-509 is required for IC-417, IC-313, IC-314 and IC-315
6Must order at least one die set (DS-50X) with each GP-501
19FA-502 is needed when connecting more than one paper feed, 1 is needed for 2 PFUs, 2 are needed for 3 PFUs22 Furniture for IC-31523Furniture for IC-31324Option Bundle for IC-313
13CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51314LS-506 ships with one LC-501 cart.15Required for Plockmatic16SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher17OT-510 not compatible with IQ-50118HT-506 is recommended for customers who plan to run coated stocks and/or operate in humid environments.
76MK-732 Mount Kit Required for attachment of PI-502 Post Inserter to FS-532 Finisher.8Must order at least one binding element (RB-101) with each GP-5029RU-510 is required with a GP-50110SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher11CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51312CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-513
1HM-101 Humidification Unit includes a water tank that requires distilled water. This option is useful to eliminate curling of uncoated output.2Recommended with EF-104, 2 Fuser Loading Wagons are needed for easy installation of the EF-104 Envelope Fuser3Mandatory on all configurations4IQ-501 is strongly recommended in most configurations for color and front to back registration quality and consistency5 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 30 - Digital Production
Systel Business Equipment Co., Inc KM PRO 1100Attention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
SOFTWARE: PDNA18BNDA PageDNA BUNDLE A 5,699.00$ 159.00$ 133.93$ 112.84$ PDNA18BNDB PageDNA BUNDLE B 10,949.00$ 305.48$ 257.30$ 216.79$ PDNA18BNDEDUA PageDNA EDU BUNDLE A 7,699.00$ 214.80$ 180.93$ 152.44$ PDNA18BNDEDUB PageDNA EDU BUNDLE B 12,949.00$ 361.28$ 304.30$ 256.39$ PDNA18EXP1YR PageDNA EXPRESS PLAN - 1 YEAR M&S 4,620.00$ 128.90$ 108.57$ 91.48$ PDNA18STND1YR PageDNA STANDARD PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18EDU1YR PageDNA EDU PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18PSU PageDNA PROFESSIONAL SERVICES UNIT 1.00$ 0.03$ 0.02$ 0.02$ PDNA18SSO PageDNA SINGLE SIGN ON INTEGRATION 2,500.00$ 69.75$ 58.75$ 49.50$ PDNA18XML PageDNA STANDARD XML INTEGRATION 500.00$ 13.95$ 11.75$ 9.90$
Purchase Price YieldSUPPLIES: A88J130 TN-016 Black Toner 105.95$ 82,000
Annual Maintenance 36 Month Maintenance
48 Month Maintenance
60 Month Maintenance
MAINTENANCE: KM11001YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 480,000 Copies Annually, Overage Fee of .0045.
$ 1,920.00 160.00$ 160.00$ 160.00$
Total Order
KM PRO 1100 Notes:
1bizhub PRO 1100 Includes: Built-in controller with PCL/PS3, (1) Drum, (1) Developer, 8GB System Memory, 1 TB HDD, Tray 1/2 : 1,500 sheets each, Total Standard Paper Capacity: 3,000 sheets (9,000 sheets max.). Requires 220V/20A (NEMA receptacle #6-20R).2Must order at least one binding element (RB-101) with each GP-502
9height, with a variety of configurations.
3MB-507 requires LU-411 or LU-412 paper feed unit.4GBC PUNCH G2 requires 2 MK-737s to install as well as at least one DIE set. Item numbers for Die sets for the PUNCH G2 start with 771XXXX and the description starts with DIE, ... Please note these are different from the GP-501 die sets.5GBC Wirebinder G1 requires the GBC Punch G2, one eWire DIE set (item number 7714915 or 7714916) and at least one eWire Spool.66MK-732 Mount Kit Required for attachment of PI-502 Post Inserter to FS-532 Finisher.7Required for Plockmatic, Watkiss and GBC PUNCH G2.8Depending on the engine it is attached to, the RU-518 may be required for banner printing and with some finishers. Check the Spec and Install Guide or Service Manual for exact configurations.
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 31 Color - Digital Production
Systel Business Equipment Co., Inc KM AccurioPress C6100Attention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
MAINTENANCE: KMC61001YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 480,000 Copies Annually, Overage Fee of .0055 mono, .0420 Color $ 2,112.00 176.00$ 176.00$ 176.00$
Total Order
KM AccurioPress C6100 Notes:
11CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51312LS-506 ships with one LC-501 cart.13Required for Plockmatic, Watkiss and GBC PUNCH G2.
66MK-732 Mount Kit Required for attachment of PI-502 Post Inserter to FS-532 Finisher.7RU-510 is required with a GP-501, as well as all configurations for AccurioPress 6136/6136P/6120. RU-510 is required for all 1250P MiCR configurations.8SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher9CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51310CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-513
1HM-101 Humidification Unit includes a water tank that requires distilled water. This option is useful to eliminate curling of uncoated output.2Recommended with EF-104, 2 Fuser Loading Wagons are needed for easy installation of the EF-104 Envelope Fuser3 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included4GBC PUNCH G2 requires 2 MK-737s to install as well as at least one DIE set. Item numbers for Die sets for the PUNCH G2 start with 771XXXX and the description starts with DIE, ... Please note these are different from the GP-501 die sets.5GBC Wirebinder G1 requires the GBC Punch G2, one eWire DIE set (item number 7714915 or 7714916) and at least one eWire Spool.
29VI-509 is required for IC-417, IC-313, IC-314 and IC-315
24Also compatible with Creo IC-31425 Furniture for IC-31526Furniture for IC-31327Option Bundle for IC-31328Also compatible with Creo IC-314
19MK-740 is compatible with OT-510, OT-511, FS-531, FS-612 and FS-53220Includes Document Feeder21One year of maintenance is included - if Leasing, it is recommended to include enough SW Maintenance to match the term of the lease (example 3,4,5 years)22Also compatible with Creo IC-31423Also compatible with Creo IC-314
14SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher15IQ-501 is strongly recommended in most configurations for color and front to back registration quality and consistency. For AccurioPress 6136/6136P/6120 the RU-518 and VI-512 are required.16Depending on the engine it is attached to, the RU-518 may be required for banner printing and with some finishers. Check the Spec and Install Guide or Service Manual for exact configurations.17HT-506 is recommended for customers who plan to run coated stocks and/or operate in humid environments.18FA-502 is needed when connecting more than one paper feed, 1 is needed for 2 PFUs, 2 are needed for 3 PFUs
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 32 - Digital Production
Systel Business Equipment Co., Inc KM AccurioPress 6120Attention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
COPIER OPTIONS: 7640012599 Basic Professional Services - Level 3 1,200.00$ 33.48$ 28.20$ 23.76$ 7640018460 Network Fee (requires custom quote) 1.00$ 0.03$ 0.02$ 0.02$ 7640015255 Professional Project Services (requires custom quote) 1.00$ 0.03$ 0.02$ 0.02$ A08RWY1 PP-701 Pre-Printed Paper Feed Enhance Kit (For PF-709) 1,068.48$ 29.81$ 25.11$ 21.16$ A7W7WY2 Paper Feeder PF-709 5,164.32$ 144.08$ 121.36$ 102.25$ A9JXWY1 Paper Feeder PF-710 8,463.04$ 236.12$ 198.88$ 167.57$ A9JYWY1 PFU Adjustment Kit FA-503 3,129.12$ 87.30$ 73.53$ 61.96$ A1RKWY3 Dehumidifier Heater HT-506 1,865.60$ 52.05$ 43.84$ 36.94$ A8FRWY1 IQ-501 Intelligent Quality Optimizer 12,600.00$ 351.54$ 296.10$ 249.48$ AAANWY1 Video Interface Kit VI-512 (Required w/ IQ-501) 960.00$ 26.78$ 22.56$ 19.01$ A93JWY2 OT-510 Open Stacker (3000 sheet stacking) 2,380.00$ 66.40$ 55.93$ 47.12$ A04HWY2 PI-502 Multi-Post Inserter 667.80$ 18.63$ 15.69$ 13.22$ A0H0W11 FD-503 Multi Folding Unit 11,352.60$ 316.74$ 266.79$ 224.78$ A660WY1 LS-506 Large Stacker Unit 11,434.80$ 319.03$ 268.72$ 226.41$ A0H2WY2 SD-506 Saddle Stitch Unit Required Monthly Maintenance is $70 per month 16,695.00$ 465.79$ 392.33$ 330.56$ A65UWY1 SD-513 Saddle Stitcher Required Monthly Maintenance is $70 per month 9,729.00$ 271.44$ 228.63$ 192.63$ A729WY1 SD-513/F Saddle Stitcher Front 12,953.70$ 361.41$ 304.41$ 256.48$ A65XWY1 CR-101 Creaser Unit 6,336.00$ 176.77$ 148.90$ 125.45$ A65VWY1 FD-504 Square Folding Unit 7,020.00$ 195.86$ 164.97$ 139.00$ A65WWY1 TU-503 Trimmer Unit 9,504.00$ 265.16$ 223.34$ 188.18$ A0N9W11 GP-501 GBC Punch Unit (punch dies sold separately) 10,939.20$ 305.20$ 257.07$ 216.60$ A4F6W12 GP-502 Ring Binder 26,100.00$ 728.19$ 613.35$ 516.78$ 45181852 FURNITURE for 6136 Series Fiery NX Station w 22in 1,680.00$ 46.87$ 39.48$ 33.26$ 45181781 External HDD Kit for MIC-4160 1,500.00$ 41.85$ 35.25$ 29.70$ 45181852 FURNITURE for 6136 Series Fiery NX Station w 22in 1,680.00$ 46.87$ 39.48$ 33.26$ 63800212A Fast Pack Option for Creo IC-309/IC-309m/IC-309m2 3,120.00$ 87.05$ 73.32$ 61.78$ 63800214A Action Pack Option for Creo IC-309/IC-309m/IC-309m2 3,120.00$ 87.05$ 73.32$ 61.78$ 63800216A Trans Pack Option for Creo IC-309/IC-309m/IC-309m2 5,997.00$ 167.32$ 140.93$ 118.74$ 63800862A Preps Pack Option for Creo IC-309/IC-309m/IC-309m2 1,437.00$ 40.09$ 33.77$ 28.45$ 7640013552 Universal Stand Creo Controller 667.80$ 18.63$ 15.69$ 13.22$ A9G1WY2 VI-509 Video Interface Kit 600.00$ 16.74$ 14.10$ 11.88$ A15XW12 PB-503 Perfect Binder Required Monthly Maintenance is $60 per month 26,902.80$ 750.59$ 632.22$ 532.68$ A1AHWY2 LC-501 Additional Cart for LS-505 712.32$ 19.87$ 16.74$ 14.10$ A9CEWY1 RU-518 RELAY UNIT w/BANNER OUTPUT TRAY 6,160.00$ 171.86$ 144.76$ 121.97$ A9CFWY1 HM-103 Humidification Unit for RU-518 7,420.00$ 207.02$ 174.37$ 146.92$ A9P9WY1 Envelope Fuser EF-105 2,756.80$ 76.91$ 64.78$ 54.58$ A4F3WY5 FS-532 100 Sheet Staple Finisher 4,164.00$ 116.18$ 97.85$ 82.45$ A4F3W15 FS-532 100 finisher with PK and SD 6,414.17$ 178.96$ 150.73$ 127.00$ A4F4WY1 SD-510 Saddle Stitch Kit 1,581.94$ 44.14$ 37.18$ 31.32$ A4F5WY1 MK-732 (mount kit for PI-502) 267.00$ 7.45$ 6.27$ 5.29$ A4FAW12 PK-522 Punch Kit 501.00$ 13.98$ 11.77$ 9.92$ A4FCWY1 RU-510 Relay Unit 2,235.00$ 62.36$ 52.52$ 44.25$ 10207000 Plockmatic SD-350 Bookletmaker Required Monthly Maintenance is $300 per month 12,900.00$ 359.91$ 303.15$ 255.42$ 10200011 Plockmatic 50 Sheet Upgrade Kit 10,080.00$ 281.23$ 236.88$ 199.58$ 10307000 Plockmatic Face Trimmer 8,160.00$ 227.66$ 191.76$ 161.57$ 10507000 Plockmatic BookFold (Square Folder) 7,800.00$ 217.62$ 183.30$ 154.44$ 10407000 Plockmatic Cover Feeder 3,330.00$ 92.91$ 78.26$ 65.93$ 12207000 Plockmatic RCT (Incl Interface Module) Required Monthly Maintenance is $245 per month 25,800.00$ 719.82$ 606.30$ 510.84$ 4704000 Plockmatic High Capacity Belt Stacker 3,840.00$ 107.14$ 90.24$ 76.03$ 12200018 Plockmatic Trim Waste Conveyer for RCT 3,360.00$ 93.74$ 78.96$ 66.53$ A6H9WY2 MK-737 Mount Kit for 3rd Party Options 1,140.00$ 31.81$ 26.79$ 22.57$ 7718800 GBC PUNCH G2 (Requires at least one Die Set) 11,988.81$ 334.49$ 281.74$ 237.38$ 7714901 DIE , Coil, Rnd 43/44H 876.96$ 24.47$ 20.61$ 17.36$ 7714902 DIE, Wire 2:1, Rnd 32H 876.96$ 24.47$ 20.61$ 17.36$ 7714903 DIE, Wire 3:1, Rnd 21H 876.96$ 24.47$ 20.61$ 17.36$ 7714904 DIE, 3 Hole, 8mm 832.55$ 23.23$ 19.56$ 16.48$ 7714905 DIE, 3/5/7 Hole, 8mm 832.55$ 23.23$ 19.56$ 16.48$ 7714909 DIE, VeloBind, 11 Hole, Ltr 876.96$ 24.47$ 20.61$ 17.36$ 7714911 DIE, CombBind 19H 765.95$ 21.37$ 18.00$ 15.17$ 7714912 DIE, Wire 2:1, Sq 832.55$ 23.23$ 19.56$ 16.48$ 7714913 DIE, Wire 3:1, Sq 832.55$ 23.23$ 19.56$ 16.48$ 7714914 DIE, Coil, Oval 43/ 44H 1,942.63$ 54.20$ 45.65$ 38.46$ 7714906 DIE, 2/4 Hole, 8mm 832.55$ 23.23$ 19.56$ 16.48$ 7714917 DIE , Coil, Rnd, 44/47H HD 2,497.67$ 69.68$ 58.70$ 49.45$ 7714918 DIE, 3 Hole, 8mm, HD 1,443.10$ 40.26$ 33.91$ 28.57$ 7714919 DIE, CombBind, 19/21H HD 2,775.19$ 77.43$ 65.22$ 54.95$ A874WY2 Hard Disk HD-523 924.00$ 25.78$ 21.71$ 18.30$ A0W6WY4 Removable HDD RH-101 2,789.87$ 77.84$ 65.56$ 55.24$ AAAMWY1 Upgrade Kit UK-217 (APPE Option) 409.60$ 11.43$ 9.63$ 8.11$ R5427000136466 AU-205H IC Card Reader 239.40$ 6.68$ 5.63$ 4.74$ EV20830L630GNS ESP POWER FILTER 240V/30A 1,003.50$ 28.00$ 23.58$ 19.87$ EVS20830L630GNS ESP ENVISIONSENSE PMS 208V-240V/30A 1,237.50$ 34.53$ 29.08$ 24.50$ XGPCS15DKM ESP Diagnostic Power Filter 120V/15A 165.00$ 4.60$ 3.88$ 3.27$
SOFTWARE: 45111156 EFI IC-417 Productivity Package Productivity Package 3,445.00$ 96.12$ 80.96$ 68.21$ 45182398 MIC-4160 Fiery Image Controller for 6136 Series 7,200.00$ 200.88$ 169.20$ 142.56$ 45111134 Fiery Impose 1,750.00$ 48.83$ 41.13$ 34.65$ 45112781 Fiery JobFlow (includes 1yr maintenance) 3,775.80$ 105.34$ 88.73$ 74.76$ 45111136 EFI Fiery Compose S/W License 770.00$ 21.48$ 18.10$ 15.25$ 45111138 EFI Fiery Impose-Compose S/W License 2,100.00$ 58.59$ 49.35$ 41.58$ AA2N0Y1 AccurioPro Conductor 2,500.00$ 69.75$ 58.75$ 49.50$ 7640020160 AccurioPro Conductor Annual Support 450.00$ 12.56$ 10.58$ 8.91$ 9967005207 AccurioPro Flux Raster Editor incl. 1 year Service/Maintenance (SMP) 1,640.00$ 45.76$ 38.54$ 32.47$ 9967005219 AccurioPro Flux PaperCut Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 3,200.00$ 89.28$ 75.20$ 63.36$ 9967005221 AccurioPro Flux pdfToolbox Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 1,600.00$ 44.64$ 37.60$ 31.68$ 9967005223 AccurioPro Flux PitStop Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 1,600.00$ 44.64$ 37.60$ 31.68$ 9967006540 AccurioPro Flux XML Connector, V7 incl. 1 year Service/Maintenance (SMP) Option for Flux Premium 4,270.00$ 119.13$ 100.35$ 84.55$ 9967005208 Flux Raster Editor - additional 1 year Service/Maintenance (SMP) 322.00$ 8.98$ 7.57$ 6.38$ 9967005220 AccurioPro Flux PaperCut Connector – additional 1 year Service/Maintenance (SMP) 594.00$ 16.57$ 13.96$ 11.76$ 9967005222 AccurioPro Flux pdfToolbox Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967005224 AccurioPro Flux PitStop Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967006541 1 year additional Service/Maintenance (SMP) Option for Flux XML Connector 800.00$ 22.32$ 18.80$ 15.84$ 9967006541 1 year additional Service/Maintenance (SMP) Option for Flux XML Connector 800.00$ 22.32$ 18.80$ 15.84$ PDNA18BNDA PageDNA BUNDLE A 5,699.00$ 159.00$ 133.93$ 112.84$ PDNA18BNDB PageDNA BUNDLE B 10,949.00$ 305.48$ 257.30$ 216.79$ PDNA18BNDEDUA PageDNA EDU BUNDLE A 7,699.00$ 214.80$ 180.93$ 152.44$ PDNA18BNDEDUB PageDNA EDU BUNDLE B 12,949.00$ 361.28$ 304.30$ 256.39$
PDNA18EXP1YR PageDNA EXPRESS PLAN - 1 YEAR M&S 4,620.00$ 128.90$ 108.57$ 91.48$ PDNA18STND1YR PageDNA STANDARD PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18EDU1YR PageDNA EDU PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18PSU PageDNA PROFESSIONAL SERVICES UNIT 1.00$ 0.03$ 0.02$ 0.02$ PDNA18SSO PageDNA SINGLE SIGN ON INTEGRATION 2,500.00$ 69.75$ 58.75$ 49.50$ PDNA18XML PageDNA STANDARD XML INTEGRATION 500.00$ 13.95$ 11.75$ 9.90$ PDNA18CXML PageDNA CXML ERP INTEGRATION 3,000.00$ 83.70$ 70.50$ 59.40$ GWpceaAPI PaperCut External Account API Gateway 495.00$ 13.81$ 11.63$ 9.80$ PCQuickBksInt Quickbooks integration with PaperCut 3,625.00$ 101.14$ 85.19$ 71.78$ PCSageInt Sage accounting integration w/ PaperCut 4,375.00$ 122.06$ 102.81$ 86.63$ PC21001021001 PlanetPress Connect 11,400.00$ 318.06$ 267.90$ 225.72$ PC21001021002 PlanetPress Connect 2+ Licenses 8,550.00$ 238.55$ 200.93$ 169.29$
Purchase Price YieldSUPPLIES: A9K1130 TN017 Black Toner 178.75$ 105,000
Annual Maintenance
36 Month Maintenance
48 Month Maintenance
60 Month Maintenance
MAINTENANCE: KM61201YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 540,000 Copies Annually, Overage Fee of .0045 $ 1,920.00 160.00$ 160.00$ 160.00$
Total Order
KM AccurioPress 6120 Notes:
1 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included
13Required for Plockmatic, Watkiss and GBC PUNCH G2.14SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher15IQ-501 is strongly recommended in most configurations for color and front to back registration quality and consistency. For AccurioPress 6136/6136P/6120 the RU-518 and VI-512 are required.16Depending on the engine it is attached to, the RU-518 may be required for banner printing and with some finishers. Check the Spec and Install Guide or Service Manual for exact configurations.
2GBC PUNCH G2 requires 2 MK-732s to install as well as at least one DIE set. Item numbers for Die sets for the PUNCH G2 start with 771XXXX and the description starts with DIE, ... Please note these are different from the GP-501 die sets.
3Must order at least one die set (DS-50X) with each GP-5014Must order GC-501 Glue Chips with PB-50356MK-732 Mount Kit Required for attachment of PI-502 Post Inserter to FS-532 Finisher.6Must order at least one binding element (RB-101) with each GP-502. Combination of GP-502 and IQ-501 is not possible with AccurioPress 6136/6136P/6120.7RU-510 is required with a GP-501, as well as all configurations for AccurioPress 6136/6136P/6120.
17PP-701 is parts kit for PF-706 and PF-709 to enable better feeding of pre-printed paper.
8SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher9CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51310CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51311CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51312LS-506 ships with one LC-501 cart.
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 32 - Digital Production
Systel Business Equipment Co., Inc KM AccurioPress 6136Attention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
9967005223 AccurioPro Flux PitStop Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 1,600.00$ 44.64$ 37.60$ 31.68$ 9967006540 AccurioPro Flux XML Connector, V7 incl. 1 year Service/Maintenance (SMP) Option for Flux Premium 4,270.00$ 119.13$ 100.35$ 84.55$ 9967005208 Flux Raster Editor - additional 1 year Service/Maintenance (SMP) 322.00$ 8.98$ 7.57$ 6.38$ 9967005220 AccurioPro Flux PaperCut Connector – additional 1 year Service/Maintenance (SMP) 594.00$ 16.57$ 13.96$ 11.76$ 9967005222 AccurioPro Flux pdfToolbox Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967005224 AccurioPro Flux PitStop Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967006541 1 year additional Service/Maintenance (SMP) Option for Flux XML Connector 800.00$ 22.32$ 18.80$ 15.84$ 9967005220 AccurioPro Flux PaperCut Connector – additional 1 year Service/Maintenance (SMP) 594.00$ 16.57$ 13.96$ 11.76$ 9967006541 1 year additional Service/Maintenance (SMP) Option for Flux XML Connector 800.00$ 22.32$ 18.80$ 15.84$ PDNA18BNDA PageDNA BUNDLE A 5,699.00$ 159.00$ 133.93$ 112.84$ PDNA18BNDB PageDNA BUNDLE B 10,949.00$ 305.48$ 257.30$ 216.79$ PDNA18BNDEDUA PageDNA EDU BUNDLE A 7,699.00$ 214.80$ 180.93$ 152.44$ PDNA18BNDEDUB PageDNA EDU BUNDLE B 12,949.00$ 361.28$ 304.30$ 256.39$ PDNA18EXP1YR PageDNA EXPRESS PLAN - 1 YEAR M&S 4,620.00$ 128.90$ 108.57$ 91.48$ PDNA18STND1YR PageDNA STANDARD PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18EDU1YR PageDNA EDU PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18PSU PageDNA PROFESSIONAL SERVICES UNIT 1.00$ 0.03$ 0.02$ 0.02$ PDNA18SSO PageDNA SINGLE SIGN ON INTEGRATION 2,500.00$ 69.75$ 58.75$ 49.50$ PDNA18XML PageDNA STANDARD XML INTEGRATION 500.00$ 13.95$ 11.75$ 9.90$ PDNA18CXML PageDNA CXML ERP INTEGRATION 3,000.00$ 83.70$ 70.50$ 59.40$ GWpceaAPI PaperCut External Account API Gateway 495.00$ 13.81$ 11.63$ 9.80$ PCQuickBksInt Quickbooks integration with PaperCut 3,625.00$ 101.14$ 85.19$ 71.78$ PCSageInt Sage accounting integration w/ PaperCut 4,375.00$ 122.06$ 102.81$ 86.63$ PC21001021001 PlanetPress Connect 11,400.00$ 318.06$ 267.90$ 225.72$ PC21001021002 PlanetPress Connect 2+ Licenses 8,550.00$ 238.55$ 200.93$ 169.29$
Purchase Price YieldSUPPLIES: A9K1130 TN017 Black Toner 178.75$ 105,000
Annual Maintenance 36 Month Maintenance
48 Month Maintenance
60 Month Maintenance
MAINTENANCE: KM61361YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 540,000 Copies Annually, Overage Fee of .0045 $ 1,920.00 160.00$ 160.00$ 160.00$
Total Order
KM AccurioPress 6136 Notes:
17PP-701 is parts kit for PF-706 and PF-709 to enable better feeding of pre-printed paper.
9CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51310CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51311CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51312LS-506 ships with one LC-501 cart.13Required for Plockmatic, Watkiss and GBC PUNCH G2.14SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher15IQ-501 is strongly recommended in most configurations for color and front to back registration quality and consistency. For AccurioPress 6136/6136P/6120 the RU-518 and VI-512 are required.16Depending on the engine it is attached to, the RU-518 may be required for banner printing and with some finishers. Check the Spec and Install Guide or Service Manual for exact configurations.
6Must order at least one binding element (RB-101) with each GP-502. Combination of GP-502 and IQ-501 is not possible with AccurioPress 6136/6136P/6120.7RU-510 is required with a GP-501, as well as all configurations for AccurioPress 6136/6136P/6120.8SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher
1 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included2GBC PUNCH G2 requires 2 MK-732s to install as well as at least one DIE set. Item numbers for Die sets for the PUNCH G2 start with 771XXXX and the description starts with DIE, ... Please note these are different from the GP-501 die sets.3Must order at least one die set (DS-50X) with each GP-5014Must order GC-501 Glue Chips with PB-50356MK-732 Mount Kit Required for attachment of PI-502 Post Inserter to FS-532 Finisher.
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 32 - Digital Production
Systel Business Equipment Co., Inc KM AccurioPress 6136PAttention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
9967005223 AccurioPro Flux PitStop Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 1,600.00$ 44.64$ 37.60$ 31.68$ 9967006540 AccurioPro Flux XML Connector, V7 incl. 1 year Service/Maintenance (SMP) Option for Flux Premium 4,270.00$ 119.13$ 100.35$ 84.55$ 9967005208 Flux Raster Editor - additional 1 year Service/Maintenance (SMP) 322.00$ 8.98$ 7.57$ 6.38$ 9967005220 AccurioPro Flux PaperCut Connector – additional 1 year Service/Maintenance (SMP) 594.00$ 16.57$ 13.96$ 11.76$ 9967005222 AccurioPro Flux pdfToolbox Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967005224 AccurioPro Flux PitStop Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967006541 1 year additional Service/Maintenance (SMP) Option for Flux XML Connector 800.00$ 22.32$ 18.80$ 15.84$ 9967005220 AccurioPro Flux PaperCut Connector – additional 1 year Service/Maintenance (SMP) 594.00$ 16.57$ 13.96$ 11.76$ PDNA18BNDA PageDNA BUNDLE A 5,699.00$ 159.00$ 133.93$ 112.84$ PDNA18BNDB PageDNA BUNDLE B 10,949.00$ 305.48$ 257.30$ 216.79$ PDNA18BNDEDUA PageDNA EDU BUNDLE A 7,699.00$ 214.80$ 180.93$ 152.44$ PDNA18BNDEDUB PageDNA EDU BUNDLE B 12,949.00$ 361.28$ 304.30$ 256.39$ PDNA18EXP1YR PageDNA EXPRESS PLAN - 1 YEAR M&S 4,620.00$ 128.90$ 108.57$ 91.48$ PDNA18STND1YR PageDNA STANDARD PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18EDU1YR PageDNA EDU PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18PSU PageDNA PROFESSIONAL SERVICES UNIT 1.00$ 0.03$ 0.02$ 0.02$ PDNA18SSO PageDNA SINGLE SIGN ON INTEGRATION 2,500.00$ 69.75$ 58.75$ 49.50$ PDNA18XML PageDNA STANDARD XML INTEGRATION 500.00$ 13.95$ 11.75$ 9.90$ PDNA18CXML PageDNA CXML ERP INTEGRATION 3,000.00$ 83.70$ 70.50$ 59.40$ GWpceaAPI PaperCut External Account API Gateway 495.00$ 13.81$ 11.63$ 9.80$ PCQuickBksInt Quickbooks integration with PaperCut 3,625.00$ 101.14$ 85.19$ 71.78$ PCSageInt Sage accounting integration w/ PaperCut 4,375.00$ 122.06$ 102.81$ 86.63$ PC21001021001 PlanetPress Connect 11,400.00$ 318.06$ 267.90$ 225.72$ PC21001021002 PlanetPress Connect 2+ Licenses 8,550.00$ 238.55$ 200.93$ 169.29$
Purchase Price YieldSUPPLIES: A9K1130 TN017 Black Toner 178.75$ 105,000
Annual Maintenance 36 Month Maintenance
48 Month Maintenance
60 Month Maintenance
MAINTENANCE: KM6136P1YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 540,000 Copies Annually, Overage Fee of .0045 $ 1,920.00 160.00$ 160.00$ 160.00$
Total Order
KM AccurioPress 6136P Notes:
17PP-701 is parts kit for PF-706 and PF-709 to enable better feeding of pre-printed paper.
1 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included
13Required for Plockmatic, Watkiss and GBC PUNCH G2.14SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher15IQ-501 is strongly recommended in most configurations for color and front to back registration quality and consistency. For AccurioPress 6136/6136P/6120 the RU-518 and VI-512 are required.16Depending on the engine it is attached to, the RU-518 may be required for banner printing and with some finishers. Check the Spec and Install Guide or Service Manual for exact configurations.
8SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher9CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51310CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51311CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51312LS-506 ships with one LC-501 cart.
2GBC PUNCH G2 requires 2 MK-732s to install as well as at least one DIE set. Item numbers for Die sets for the PUNCH G2 start with 771XXXX and the description starts with DIE, ... Please note these are different from the GP-501 die sets.3Must order at least one die set (DS-50X) with each GP-5014Must order GC-501 Glue Chips with PB-50356MK-732 Mount Kit Required for attachment of PI-502 Post Inserter to FS-532 Finisher.6Must order at least one binding element (RB-101) with each GP-502. Combination of GP-502 and IQ-501 is not possible with AccurioPress 6136/6136P/6120.7RU-510 is required with a GP-501, as well as all configurations for AccurioPress 6136/6136P/6120.
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 34 - Digital Production
Systel Business Equipment Co., Inc KM 2250PAttention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
COPIER OPTIONS: 7640012599 Basic Professional Services - Level 3 1,200.00$ 33.48$ 28.20$ 23.76$ 7640018460 Network Fee (requires custom quote) 1.00$ 0.03$ 0.02$ 0.02$ 7640015255 Professional Project Services (requires custom quote) 1.00$ 0.03$ 0.02$ 0.02$ A08RWY1 PP-701 Pre-Printed Paper Feed Enhance Kit (For PF-701 and PF-702) 1,068.48$ 29.81$ 25.11$ 21.16$ A4EYWY1 PF-706 Large capacity paper feed unit 3,873.24$ 108.06$ 91.02$ 76.69$ A0GDWY1 PF-703 Vacuum Paper Feed Unit / PI-PFU (5,000 sheets) 8,463.04$ 236.12$ 198.88$ 167.57$ A0GFWY1 FA-501 PI-PFU Connection Kit 3,129.12$ 87.30$ 73.53$ 61.96$ A15AWY1 HT-505 Dehumidifier/Heater for PFU 1,268.82$ 35.40$ 29.82$ 25.12$ A0H0W11 FD-503 Multi Folding Unit 11,352.60$ 316.74$ 266.79$ 224.78$ A660WY1 LS-506 Large Stacker Unit 11,434.80$ 319.03$ 268.72$ 226.41$ A0H2WY2 SD-506 Saddle Stitch Unit 16,695.00$ 465.79$ 392.33$ 330.56$ A65UWY1 SD-513 Saddle Stitcher 9,729.00$ 271.44$ 228.63$ 192.63$ A729WY1 SD-513/F Saddle Stitcher Front 12,953.70$ 361.41$ 304.41$ 256.48$ A65XWY1 CR-101 Creaser Unit 6,336.00$ 176.77$ 148.90$ 125.45$ A65VWY1 FD-504 Square Folding Unit 7,020.00$ 195.86$ 164.97$ 139.00$ A65WWY1 TU-503 Trimmer Unit 9,504.00$ 265.16$ 223.34$ 188.18$ A0N9W11 GP-501 GBC Punch Unit (punch dies sold separately) 10,939.20$ 305.20$ 257.07$ 216.60$ A0NAW11 DS-501 3 Hole Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NCW11 DS-502 19 Hole Cerlox Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NDW11 DS-503 32 Hole Wirebind Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NEW11 DS-504 21 Hole Wirebind Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A4F6W12 GP-502 - Ring Binder 26,100.00$ 728.19$ 613.35$ 516.78$ A0NFW11 DS-505 44 Hole Color Coil Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NGW11 DS-506 11 Hole Velobind Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NHW11 DS-507 32 Hole Proclick Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A15XW12 PB-503 Perfect Binder 26,902.80$ 750.59$ 632.22$ 532.68$ A1AHWY2 LC-501 Additional Cart for LS-505 712.32$ 19.87$ 16.74$ 14.10$ A2A2W13 RU-509 Relay/Buffer Pass Unit 3,816.00$ 106.47$ 89.68$ 75.56$ A4F3WY2 FS-532 100 Sheet Staple Finisher 4,164.00$ 116.18$ 97.85$ 82.45$ A4FAW12 PK-522 - punch kit 501.17$ 13.98$ 11.78$ 9.92$ A4FCWY1 RU-510 Relay Unit 2,235.00$ 62.36$ 52.52$ 44.25$ 63800212A Fast Pack Option for Creo IC-309/IC-309m/IC-309m2 3,120.00$ 87.05$ 73.32$ 61.78$ 63800214A Action Pack Option for Creo IC-309/IC-309m/IC-309m2 3,120.00$ 87.05$ 73.32$ 61.78$ 63800216A Trans Pack Option for Creo IC-309/IC-309m/IC-309m2 5,997.00$ 167.32$ 140.93$ 118.74$ 63800862A Preps Pack Option for Creo IC-309/IC-309m/IC-309m2 1,437.00$ 40.09$ 33.77$ 28.45$ 7714357 GBC 3-Hole DuraGlide HD Die Set 1,274.40$ 35.56$ 29.95$ 25.23$ 7714355 GBC 19-Hole DuraGlide HD Die Set 2,559.00$ 71.40$ 60.14$ 50.67$ 10207000 Plockmatic SD-350 Bookletmaker 12,900.00$ 359.91$ 303.15$ 255.42$ 10200011 Plockmatic 50 Sheet Upgrade Kit 10,080.00$ 281.23$ 236.88$ 199.58$ 10307000 Plockmatic Face Trimmer 8,160.00$ 227.66$ 191.76$ 161.57$ 10507000 Plockmatic BookFold (Square Folder) 7,800.00$ 217.62$ 183.30$ 154.44$ 10407000 Plockmatic Cover Feeder 3,330.00$ 92.91$ 78.26$ 65.93$ 12207000 Plockmatic RCT (Incl Interface Module) 25,800.00$ 719.82$ 606.30$ 510.84$ 4704000 Plockmatic High Capacity Belt Stacker 3,840.00$ 107.14$ 90.24$ 76.03$ 12200018 Plockmatic Trim Waste Conveyer for RCT 3,360.00$ 93.74$ 78.96$ 66.53$ A6H9WY2 MK-737 Mount Kit for 3rd Party Options 1,140.00$ 31.81$ 26.79$ 22.57$ A0W5WY1 HD-511 Removable HDD Inner Case Kit for 12XX/105X 1,127.84$ 31.47$ 26.50$ 22.33$ A0W6WY2 RH-101 Removable HDD Kit for 12XX/105X 2,789.87$ 77.84$ 65.56$ 55.24$ R5427000136466 AU-205H IC Card Reader 239.40$ 6.68$ 5.63$ 4.74$ EV20830L630GNS ESP POWER FILTER 240V/30A 1,003.50$ 28.00$ 23.58$ 19.87$ EVS20830L630GNS ESP ENVISIONSENSE PMS 208V-240V/30A 1,237.50$ 34.53$ 29.08$ 24.50$ XGPCS15DKM ESP Diagnostic Power Filter 120V/15A 165.00$ 4.60$ 3.88$ 3.27$
SOFTWARE: 45111134 Fiery Impose 1,750.00$ 48.83$ 41.13$ 34.65$ 45111156 EFI IC-417 Productivity Package Productivity Package 3,445.00$ 96.12$ 80.96$ 68.21$ AA2N0Y1 AccurioPro Conductor 2,500.00$ 69.75$ 58.75$ 49.50$ 7640020160 AccurioPro Conductor Annual Support 450.00$ 12.56$ 10.58$ 8.91$ 9967005207 AccurioPro Flux Raster Editor incl. 1 year Service/Maintenance (SMP) 1,640.00$ 45.76$ 38.54$ 32.47$ 9967005219 AccurioPro Flux PaperCut Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 3,200.00$ 89.28$ 75.20$ 63.36$ 9967005221 AccurioPro Flux pdfToolbox Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 1,600.00$ 44.64$ 37.60$ 31.68$ 9967005223 AccurioPro Flux PitStop Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 1,600.00$ 44.64$ 37.60$ 31.68$ 9967006540 AccurioPro Flux XML Connector, V7 incl. 1 year Service/Maintenance (SMP) Option for Flux Premium 4,270.00$ 119.13$ 100.35$ 84.55$ 9967005208 Flux Raster Editor - additional 1 year Service/Maintenance (SMP) 322.00$ 8.98$ 7.57$ 6.38$ 9967005220 AccurioPro Flux PaperCut Connector – additional 1 year Service/Maintenance (SMP) 594.00$ 16.57$ 13.96$ 11.76$ 9967005222 AccurioPro Flux pdfToolbox Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967005224 AccurioPro Flux PitStop Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967006541 1 year additional Service/Maintenance (SMP) Option for Flux XML Connector 800.00$ 22.32$ 18.80$ 15.84$ 9967005220 AccurioPro Flux PaperCut Connector – additional 1 year Service/Maintenance (SMP) 594.00$ 16.57$ 13.96$ 11.76$ 9967005222 AccurioPro Flux pdfToolbox Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967005224 AccurioPro Flux PitStop Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967006541 1 year additional Service/Maintenance (SMP) Option for Flux XML Connector 800.00$ 22.32$ 18.80$ 15.84$ PDNA18BNDA PageDNA BUNDLE A 5,699.00$ 159.00$ 133.93$ 112.84$ PDNA18BNDB PageDNA BUNDLE B 10,949.00$ 305.48$ 257.30$ 216.79$ PDNA18BNDEDUA PageDNA EDU BUNDLE A 7,699.00$ 214.80$ 180.93$ 152.44$ PDNA18BNDEDUB PageDNA EDU BUNDLE B 12,949.00$ 361.28$ 304.30$ 256.39$ PDNA18EXP1YR PageDNA EXPRESS PLAN - 1 YEAR M&S 4,620.00$ 128.90$ 108.57$ 91.48$ PDNA18STND1YR PageDNA STANDARD PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18EDU1YR PageDNA EDU PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18PSU PageDNA PROFESSIONAL SERVICES UNIT 1.00$ 0.03$ 0.02$ 0.02$ PDNA18SSO PageDNA SINGLE SIGN ON INTEGRATION 2,500.00$ 69.75$ 58.75$ 49.50$ PDNA18XML PageDNA STANDARD XML INTEGRATION 500.00$ 13.95$ 11.75$ 9.90$ PDNA18CXML PageDNA CXML ERP INTEGRATION 3,000.00$ 83.70$ 70.50$ 59.40$ GWpceaAPI PaperCut External Account API Gateway 495.00$ 13.81$ 11.63$ 9.80$ PCQuickBksInt Quickbooks integration with PaperCut 3,625.00$ 101.14$ 85.19$ 71.78$ PCSageInt Sage accounting integration w/ PaperCut 4,375.00$ 122.06$ 102.81$ 86.63$ PC21001021001 PlanetPress Connect 11,400.00$ 318.06$ 267.90$ 225.72$ PC21001021002 PlanetPress Connect 2+ Licenses 8,550.00$ 238.55$ 200.93$ 169.29$ AA2N0Y1 AccurioPro Conductor 2,500.00$ 69.75$ 58.75$ 49.50$
Purchase Price YieldSUPPLIES: A3VV130 TN014 Black Toner 178.75$ 137,000
Annual Maintenance 36 Month Maintenance
48 Month Maintenance
60 Month Maintenance
MAINTENANCE: KM2250P1YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 540,000 Copies Annually, Overage Fee of .0039 mono $ 1,944.00 162.00$ 162.00$ 162.00$
Total Order
KM AccurioPress 2250P Notes:
16PP-701 is parts kit for PF-706 and PF-709 to enable better feeding of pre-printed paper.
1bizhub PRESS 2250P includes: (2) 1250P engines (2) RU-510 Relay Units (1) TD-501 Tandem Connection Relay Unit with Patlite. Each engine includes: built-in controller with PCL/PS3, (2) Drum, (1) Developer, 512 MB System Memory, 768 MB DRAM, Tray 1/2: 1,500 sheets each, Total Standard Paper Capacity: 3,000 sheets, (14,000 sheets max.), Requires 220VAC/30A (x2)
2bizhub PRESS 2250P Conversion Kit includes: (1) bizhub PRESS 1250P engine with built-in controller with PCL/PS3, (1) Drum, (1) Developer, 512 MB System Memory, 768 MB DRAM, (1) Conversion Kit to turn existing bizhub PRESS 1250P into Sub-Engine, (1) RU-510 Relay Unit and (1) TD-501 Tandem Connection Relay Unit. Requires TWO 208-240VAC/30A power outlets.
3Must order at least one binding element (RB-101) with each GP-5024 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included5Must order at least one die set (DS-50X) with each GP-5016Must order GC-501 Glue Chips with PB-50378RU-509 is optional however it is HIGHLY RECOMMENDED as it provides de-curling functionality as well as CDC (color only) for improved color consistency8RU-510 is required with a GP-501, as well as all configurations for AccurioPress 6136/6136P/6120. RU-510 is required for all 1250P MiCR configurations.9SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher10CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51311CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51312CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51313LS-506 ships with one LC-501 cart.14Required for Plockmatic and GBC PUNCH G2.15SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher
ORDER FORMSTATE OF NORTH CAROLINA COPIER TERM CONTRACT 204D
MAIL PURCHASE ORDERS TO: Lot E Segment 36 - Digital Production
Systel Business Equipment Co., Inc KM 2250PAttention: Janene Aul OR FAX ORDERS TO:P.O. Box 35910 1-910-483-2529Fayetteville, NC 28303 PO#
COPIER OPTIONS: 7640012599 Basic Professional Services - Level 3 1,200.00$ 33.48$ 28.20$ 23.76$ 7640018460 Network Fee (requires custom quote) 1.00$ 0.03$ 0.02$ 0.02$ 7640015255 Professional Project Services (requires custom quote) 1.00$ 0.03$ 0.02$ 0.02$ A08RWY1 PP-701 Pre-Printed Paper Feed Enhance Kit (For PF-701 and PF-702) 1,068.48$ 29.81$ 25.11$ 21.16$ A4EYWY1 PF-706 Large capacity paper feed unit 3,873.24$ 108.06$ 91.02$ 76.69$ A0GDWY1 PF-703 Vacuum Paper Feed Unit / PI-PFU (5,000 sheets) 8,463.04$ 236.12$ 198.88$ 167.57$ A0GFWY1 FA-501 PI-PFU Connection Kit 3,129.12$ 87.30$ 73.53$ 61.96$ A15AWY1 HT-505 Dehumidifier/Heater for PFU 1,268.82$ 35.40$ 29.82$ 25.12$ A0H0W11 FD-503 Multi Folding Unit 11,352.60$ 316.74$ 266.79$ 224.78$ A660WY1 LS-506 Large Stacker Unit 11,434.80$ 319.03$ 268.72$ 226.41$ A0H2WY2 SD-506 Saddle Stitch Unit 16,695.00$ 465.79$ 392.33$ 330.56$ A65UWY1 SD-513 Saddle Stitcher 9,729.00$ 271.44$ 228.63$ 192.63$ A729WY1 SD-513/F Saddle Stitcher Front 12,953.70$ 361.41$ 304.41$ 256.48$ A65XWY1 CR-101 Creaser Unit 6,336.00$ 176.77$ 148.90$ 125.45$ A65VWY1 FD-504 Square Folding Unit 7,020.00$ 195.86$ 164.97$ 139.00$ A65WWY1 TU-503 Trimmer Unit 9,504.00$ 265.16$ 223.34$ 188.18$ A0N9W11 GP-501 GBC Punch Unit (punch dies sold separately) 10,939.20$ 305.20$ 257.07$ 216.60$ A0NAW11 DS-501 3 Hole Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NCW11 DS-502 19 Hole Cerlox Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NDW11 DS-503 32 Hole Wirebind Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NEW11 DS-504 21 Hole Wirebind Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A4F6W12 GP-502 - Ring Binder 26,100.00$ 728.19$ 613.35$ 516.78$ A0NFW11 DS-505 44 Hole Color Coil Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NGW11 DS-506 11 Hole Velobind Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A0NHW11 DS-507 32 Hole Proclick Punch Die 890.40$ 24.84$ 20.92$ 17.63$ A15XW12 PB-503 Perfect Binder 26,902.80$ 750.59$ 632.22$ 532.68$ A1AHWY2 LC-501 Additional Cart for LS-505 712.32$ 19.87$ 16.74$ 14.10$ A2A2W13 RU-509 Relay/Buffer Pass Unit 3,816.00$ 106.47$ 89.68$ 75.56$ A4F3WY2 FS-532 100 Sheet Staple Finisher 4,164.00$ 116.18$ 97.85$ 82.45$ A4FAW12 PK-522 - punch kit 501.17$ 13.98$ 11.78$ 9.92$ A4FCWY1 RU-510 Relay Unit 2,235.00$ 62.36$ 52.52$ 44.25$ 63800212A Fast Pack Option for Creo IC-309/IC-309m/IC-309m2 3,120.00$ 87.05$ 73.32$ 61.78$ 63800214A Action Pack Option for Creo IC-309/IC-309m/IC-309m2 3,120.00$ 87.05$ 73.32$ 61.78$ 63800216A Trans Pack Option for Creo IC-309/IC-309m/IC-309m2 5,997.00$ 167.32$ 140.93$ 118.74$ 63800862A Preps Pack Option for Creo IC-309/IC-309m/IC-309m2 1,437.00$ 40.09$ 33.77$ 28.45$ 7714357 GBC 3-Hole DuraGlide HD Die Set 1,274.40$ 35.56$ 29.95$ 25.23$ 7714355 GBC 19-Hole DuraGlide HD Die Set 2,559.00$ 71.40$ 60.14$ 50.67$ 10207000 Plockmatic SD-350 Bookletmaker 12,900.00$ 359.91$ 303.15$ 255.42$ 10200011 Plockmatic 50 Sheet Upgrade Kit 10,080.00$ 281.23$ 236.88$ 199.58$ 10307000 Plockmatic Face Trimmer 8,160.00$ 227.66$ 191.76$ 161.57$ 10507000 Plockmatic BookFold (Square Folder) 7,800.00$ 217.62$ 183.30$ 154.44$ 10407000 Plockmatic Cover Feeder 3,330.00$ 92.91$ 78.26$ 65.93$ 12207000 Plockmatic RCT (Incl Interface Module) 25,800.00$ 719.82$ 606.30$ 510.84$ 4704000 Plockmatic High Capacity Belt Stacker 3,840.00$ 107.14$ 90.24$ 76.03$ 12200018 Plockmatic Trim Waste Conveyer for RCT 3,360.00$ 93.74$ 78.96$ 66.53$ A6H9WY2 MK-737 Mount Kit for 3rd Party Options 1,140.00$ 31.81$ 26.79$ 22.57$ A0W5WY1 HD-511 Removable HDD Inner Case Kit for 12XX/105X 1,127.84$ 31.47$ 26.50$ 22.33$ A0W6WY2 RH-101 Removable HDD Kit for 12XX/105X 2,789.87$ 77.84$ 65.56$ 55.24$ R5427000136466 AU-205H IC Card Reader 239.40$ 6.68$ 5.63$ 4.74$ EV20830L630GNS ESP POWER FILTER 240V/30A 1,003.50$ 28.00$ 23.58$ 19.87$ EVS20830L630GNS ESP ENVISIONSENSE PMS 208V-240V/30A 1,237.50$ 34.53$ 29.08$ 24.50$ XGPCS15DKM ESP Diagnostic Power Filter 120V/15A 165.00$ 4.60$ 3.88$ 3.27$
SOFTWARE: 45111134 Fiery Impose 1,750.00$ 48.83$ 41.13$ 34.65$ 45111156 EFI IC-417 Productivity Package Productivity Package 3,445.00$ 96.12$ 80.96$ 68.21$ AA2N0Y1 AccurioPro Conductor 2,500.00$ 69.75$ 58.75$ 49.50$ 7640020160 AccurioPro Conductor Annual Support 450.00$ 12.56$ 10.58$ 8.91$ 9967005207 AccurioPro Flux Raster Editor incl. 1 year Service/Maintenance (SMP) 1,640.00$ 45.76$ 38.54$ 32.47$ 9967005219 AccurioPro Flux PaperCut Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 3,200.00$ 89.28$ 75.20$ 63.36$ 9967005221 AccurioPro Flux pdfToolbox Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 1,600.00$ 44.64$ 37.60$ 31.68$ 9967005223 AccurioPro Flux PitStop Connector (incl. SMP) Option for AccurioPro Flux Premium or Ultimate 1,600.00$ 44.64$ 37.60$ 31.68$ 9967006540 AccurioPro Flux XML Connector, V7 incl. 1 year Service/Maintenance (SMP) Option for Flux Premium 4,270.00$ 119.13$ 100.35$ 84.55$ 9967005208 Flux Raster Editor - additional 1 year Service/Maintenance (SMP) 322.00$ 8.98$ 7.57$ 6.38$ 9967005220 AccurioPro Flux PaperCut Connector – additional 1 year Service/Maintenance (SMP) 594.00$ 16.57$ 13.96$ 11.76$ 9967005222 AccurioPro Flux pdfToolbox Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967005224 AccurioPro Flux PitStop Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967006541 1 year additional Service/Maintenance (SMP) Option for Flux XML Connector 800.00$ 22.32$ 18.80$ 15.84$ 9967005220 AccurioPro Flux PaperCut Connector – additional 1 year Service/Maintenance (SMP) 594.00$ 16.57$ 13.96$ 11.76$ 9967005222 AccurioPro Flux pdfToolbox Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967005224 AccurioPro Flux PitStop Connector – additional 1 year Service/Maintenance (SMP) 296.00$ 8.26$ 6.96$ 5.86$ 9967006541 1 year additional Service/Maintenance (SMP) Option for Flux XML Connector 800.00$ 22.32$ 18.80$ 15.84$ PDNA18BNDA PageDNA BUNDLE A 5,699.00$ 159.00$ 133.93$ 112.84$ PDNA18BNDB PageDNA BUNDLE B 10,949.00$ 305.48$ 257.30$ 216.79$ PDNA18BNDEDUA PageDNA EDU BUNDLE A 7,699.00$ 214.80$ 180.93$ 152.44$ PDNA18BNDEDUB PageDNA EDU BUNDLE B 12,949.00$ 361.28$ 304.30$ 256.39$ PDNA18EXP1YR PageDNA EXPRESS PLAN - 1 YEAR M&S 4,620.00$ 128.90$ 108.57$ 91.48$ PDNA18STND1YR PageDNA STANDARD PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18EDU1YR PageDNA EDU PLAN - 1 YEAR M&S 6,900.00$ 192.51$ 162.15$ 136.62$ PDNA18PSU PageDNA PROFESSIONAL SERVICES UNIT 1.00$ 0.03$ 0.02$ 0.02$ PDNA18SSO PageDNA SINGLE SIGN ON INTEGRATION 2,500.00$ 69.75$ 58.75$ 49.50$ PDNA18XML PageDNA STANDARD XML INTEGRATION 500.00$ 13.95$ 11.75$ 9.90$ PDNA18CXML PageDNA CXML ERP INTEGRATION 3,000.00$ 83.70$ 70.50$ 59.40$ GWpceaAPI PaperCut External Account API Gateway 495.00$ 13.81$ 11.63$ 9.80$ PCQuickBksInt Quickbooks integration with PaperCut 3,625.00$ 101.14$ 85.19$ 71.78$ PCSageInt Sage accounting integration w/ PaperCut 4,375.00$ 122.06$ 102.81$ 86.63$ PC21001021001 PlanetPress Connect 11,400.00$ 318.06$ 267.90$ 225.72$ PC21001021002 PlanetPress Connect 2+ Licenses 8,550.00$ 238.55$ 200.93$ 169.29$ AA2N0Y1 AccurioPro Conductor 2,500.00$ 69.75$ 58.75$ 49.50$
Purchase Price YieldSUPPLIES: A3VV130 TN014 Black Toner 178.75$ 137,000
Annual Maintenance 36 Month Maintenance
48 Month Maintenance
60 Month Maintenance
MAINTENANCE: KM2250P1YR4HR SYSTEL MAINT 4 HR NBD INC PARTS, LABOR, SUPPLIES (EXCEPT PAPER AND STAPLES) Includes 540,000 Copies Annually, Overage Fee of .0039 mono $ 1,944.00 162.00$ 162.00$ 162.00$
Total Order
KM AccurioPress 2250P Notes:
13LS-506 ships with one LC-501 cart.14Required for Plockmatic and GBC PUNCH G2.15SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher16PP-701 is parts kit for PF-706 and PF-709 to enable better feeding of pre-printed paper.
78RU-509 is optional however it is HIGHLY RECOMMENDED as it provides de-curling functionality as well as CDC (color only) for improved color consistency8RU-510 is required with a GP-501, as well as all configurations for AccurioPress 6136/6136P/6120. RU-510 is required for all 1250P MiCR configurations.9SD-513 and SD-513/F are both needed to make a complete SD-513 Saddle Stitch Finisher10CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51311CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-51312CR-101 Creaser, FD-504 Square Folding Unit and TU-503 Trimmer Unit are all options for SD-513
6Must order GC-501 Glue Chips with PB-503
1bizhub PRESS 2250P includes: (2) 1250P engines (2) RU-510 Relay Units (1) TD-501 Tandem Connection Relay Unit with Patlite. Each engine includes: built-in controller with PCL/PS3, (2) Drum, (1) Developer, 512 MB System Memory, 768 MB DRAM, Tray 1/2: 1,500 sheets each, Total Standard Paper Capacity: 3,000 sheets, (14,000 sheets max.), Requires 220VAC/30A (x2)
2bizhub PRESS 2250P Conversion Kit includes: (1) bizhub PRESS 1250P engine with built-in controller with PCL/PS3, (1) Drum, (1) Developer, 512 MB System Memory, 768 MB DRAM, (1) Conversion Kit to turn existing bizhub PRESS 1250P into Sub-Engine, (1) RU-510 Relay Unit and (1) TD-501 Tandem Connection Relay Unit. Requires TWO 208-240VAC/30A power outlets.
3Must order at least one binding element (RB-101) with each GP-5024 Plockmatic SD-500 - 50 Sheet Bookletmaker: Item Number 10200011 (Plockmatic 50 Sheet Upgrade Kit) and 10207000 (Plockmatic SD-350 Bookletmaker) must both be included5Must order at least one die set (DS-50X) with each GP-501