KLIPPEL Analyzer System Price-List Klippel GmbH, Germany Effective as from 05/09/2017 Tel. +49-351-501 939 0, Fax. +49-351-501 939 10 Page 1/9 [email protected], www.klippel.de Currency EUR All prices net, EXW (tax, duty, transportation, support extra) Item No. Product Explanation required HW Spec Price per Unit QC-EOL Hardware incl. Laser Card, Speaker Card, XLR Card, cable set, project management software (dB-Lab 210) KA3 - Klippel Analyzer 3 2000-300 H1 6.170 EUR QC hardware incl. cable set PA - Production Analyzer 4000-100 H4 4.200 EUR ü processor unit (8 DUTs) for power testing, incl. cable set PM8 - Power Monitor 8 2000-101 H2 4.500 EUR QC - Software for end-of-line testing (EOL)* EOL-testing with SPL Task and Impendance Task, open for additional optional tasks QC STANDARD Software PA 4002-010 C3 3.300 EUR ü EOL-testing with SPL-Impedance task only QC BASIC Software (incl. THD + R&B) PA 4003-002 C3 1.500 EUR ü EOL-testing with 3rd party audio interface, no voltage/current sensors, no digital IO interface, incl. USB Dongle QC STANDARD Stand- Alone Software Soundcard + Dongle 4002-100 C3 3.900 EUR ü allows modification of limits and set up without hardware QC Remote Configuration Software Dongle 4000-210 S14 1.300 EUR ü Transducer Parameter Identification Modules* identification of linear and nonlinear parameters of woofers in free air, sealed and vented enclosures LSI3 Woofer - Large Signal Identification Woofer for KA3 KA3 2000-250 5.600 EUR identification of linear and nonlinear parameters of micro- speakers, tweeters and compression drivers in free air, sealed and vented enclosures LSI3 Micro-Speaker - Large Signal Identification Micro- Speaker for KA3 KA3 2000-260 5.600 EUR QC-Task: fast measurement of voice coil offset and suspension asymmetry MSC - Motor + Suspension Check KA3, PA 4000-230 S13 4.950 EUR ü identification of linear, nonlinear and thermal parameters of woofer drivers in free air LSI Woofer - Large Signal Identification Woofer DA2 1000-212 S1 6.500 EUR identification of linear, nonlinear and thermal parameters of woofer drivers in free air, sealed and vented enclosures LSI Woofer + Box - Large Signal Identification Woofer + Box DA2 1000-230 S1 7.400 EUR upgrade from LSI Woofer to LSI Woofer + Box LSI Woofer + Box Upgrade DA2 1000-232 S1 900 EUR identification of linear, nonlinear and thermal parameters of tweeters, micro speakers, compression drivers in free air LSI Tweeter - Large Signal Identification Tweeter DA2 1000-220 S1 6.500 EUR special price for LSI Woofer user LSI Tweeter special DA2 1000-221 S1 2.900 EUR QC-Task: measure of armature offset BAC - Balanced Armature Check KA3, PA 4000-260 S39 5.200 EUR ü identification of linear electrical and mechanical parameters LPM - Linear Parameter Measurement KA3, DA2 1000-400 S2 950 EUR post-processing of the results of multiple LPM measurements (LPM required) MMT - Micro-Speaker Mulitpoint Tool KA3, DA2 1000-402 AN50 2.800 EUR QC-Task: Linear Parameter Measurement (TS-Parameter) IMP - Impedance Task KA3, PA 4000-262 950 EUR Frequency Response + Distortion Modules* measurement of transfer function and harmonic distortion TRF Standard - Transfer Function Measurement Standard KA3, DA2 1000-900 S7 950 EUR measurement of transfer function, harmonic distortion and rub & buzz TRF Pro - Transfer Function Measurement Professional KA3, DA2 1000-910 S8 1.950 EUR upgrade from TRF Standard to TRF Pro TRF Pro Upgrade KA3, DA2 1000-911 S8 1.000 EUR measurement of intermodulation distortion, harmonic distortion, DC displacement and compression (IEC 60268-5) DIS - 3D Distortion Measurement Standard KA3, DA2 1000-800 S4 3.300 EUR
9
Embed
KLIPPEL Analyzer System Price-List · PDF fileidentification of linear electrical and mechanical parameters LPM ... amplitude and phase export (EASE) NFS Complex Data ... KLIPPEL Analyzer
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
KLIPPEL Analyzer System Price-List
Klippel GmbH, Germany Effective as from 05/09/2017Tel. +49-351-501 939 0, Fax. +49-351-501 939 10 Page 1/[email protected], www.klippel.de Currency EUR
All prices net, EXW (tax, duty, transportation, support extra)
Item No. Product Explanation required HW Spec Price per Unit QC-EOL
QC hardware incl. cable setPA - Production Analyzer4000-100 H4 4.200 EUR ü
processor unit (8 DUTs) for power testing, incl. cable setPM8 - Power Monitor 82000-101 H2 4.500 EUR
QC - Software for end-of-line testing (EOL)*EOL-testing with SPL Task and Impendance Task, open foradditional optional tasksQC STANDARD Software PA4002-010 C3 3.300 EUR ü
EOL-testing with SPL-Impedance task onlyQC BASIC Software (incl.THD + R&B) PA4003-002 C3 1.500 EUR ü
EOL-testing with 3rd party audio interface, no voltage/currentsensors, no digital IO interface, incl. USB Dongle
QC STANDARD Stand-Alone Software
Soundcard +Dongle4002-100 C3 3.900 EUR ü
allows modification of limits and set up without hardwareQC RemoteConfiguration Software Dongle4000-210 S14 1.300 EUR ü
Transducer Parameter Identification Modules*
identification of linear and nonlinear parameters of woofers infree air, sealed and vented enclosures
LSI3 Woofer - LargeSignal IdentificationWoofer for KA3
KA32000-250 5.600 EUR
identification of linear and nonlinear parameters of micro-speakers, tweeters and compression drivers in free air, sealedand vented enclosures
LSI3 Micro-Speaker -Large SignalIdentification Micro-Speaker for KA3
KA32000-260 5.600 EUR
QC-Task: fast measurement of voice coil offset and suspensionasymmetry
MSC - Motor +Suspension Check KA3, PA4000-230 S13 4.950 EUR ü
identification of linear, nonlinear and thermal parameters ofwoofer drivers in free air
LSI Woofer - LargeSignal IdentificationWoofer
DA21000-212 S1 6.500 EUR
identification of linear, nonlinear and thermal parameters ofwoofer drivers in free air, sealed and vented enclosures
correction filter for compensation of room influenceCRC - Complex RoomCompensation (beta-version)
Dongle2520-030 1.200 EUR
anechoic directivity measurement (CEA 2034,TRF and turn table required)
POL - Polar Far FieldMeasurement KA3, DA21001-103 S41 1.800 EUR
precision turntable for polar measurement, incl. power cord, 3mRJ45 Cat6 cable
Turntable Outline ET250-3D Set2560-001 5.230 EUR
Transducer Part + Material Parameter Measurement*for linear + nonlinear testingincl. Ring Set and Cup & Cone Set (metal)SPM Pro Bench Set KA3, DA22500-100 C2 7.590 EUR
for linear + nonlinear testingSPM Pro Bench KA3, DA22500-101 C2 5.130 EUR ü
for QC: LST testing of spiders, surrounds, cones, passiveradiators, incl. internal laser mounting and adjustement slider
LST Bench Set - forInternal Laser KA3, DA2, PA2500-300 C6 950 EUR ü
for QC: LST testingfor RnD: linear SPM & MPM measurements of spiders,surrounds, cones, passive radiators,incl. external laser mounting and adjustement bar
LST Bench Set - forExternal Laser KA3, DA2, PA2500-310 C6 1.400 EUR ü
2-dimensional internal Laser mounting and adjustment unit,incl. mounting brackets and screws, distance adjustmentwasher set
LST - Internal LaserFixture Set2500-142 C6 290 EUR ü
2-dimensional external laser mounting and adjustment boom,incl. sensor slide rail, laser sensor rod
LST - External LaserFixture2500-141 C6 740 EUR ü
clamping parts for SPM Bench + LST BenchRing Set2500-302 C2 1.310 EUR ü
clamping parts for SPM BenchCup & Cone Set (metal)2500-111 C2 1.150 EUR
clamping parts for LST Bench (SPM Bench)Cone Set (plastic)2500-301 C2 470 EUR ü
software for linear testing with LST BenchSPM Lite - SuspensionPart Measurement Lite KA3, DA22500-103 C2 950 EUR
software for linear and nonlinear testingSPM Pro - SuspensionPart MeasurementProfessional
KA3, DA22500-102 C2 2.400 EUR
QC-Task: compliance check of spiders, cones and surroundsLST Lite - LinearSuspension Test Lite KA3, PA4000-242 C6 1.050 EUR ü
QC-Task: LST Lite features + monitoring mass and stiffnessdeviation for passive radiators
LST Pro - LinearSuspension TestProfessional
KA3, PA4000-244 C6 2.000 EUR ü
KLIPPEL Analyzer System Price-List
Klippel GmbH, Germany Effective as from 05/09/2017Tel. +49-351-501 939 0, Fax. +49-351-501 939 10 Page 4/[email protected], www.klippel.de Currency EUR
All prices net, EXW (tax, duty, transportation, support extra)
Item No. Product Explanation required HW Spec Price per Unit QC-EOL
upgrade from LSI Lite to LSI ProLST Pro Upgrade KA3, PA4000-248 C6 950 EUR ü
for linear + nonlinear testing of small suspension parts (micro-speakers, headphones)MSPM Bench KA3, DA22500-601 A12 1.500 EUR
software for linear testing of small suspension parts (micro-speakers, headphones)
MSPM Lite - MicroSuspension PartMeasurement Lite
KA3, DA22500-603 C10 2.800 EUR
software for linear and nonlinear testing of small suspensionparts (micro-speakers, headphones)
MSPM Pro - MicroSuspension PartMeasurementProfessional
KA3, DA22500-602 C11 6.800 EUR
MPM measurment clamping set as accessory for SPM Pro BenchMPM Clamp for SPMBench2500-200 C4 740 EUR
MPM measurment clamping set incl. LST Fixing Grips asaccessory for LST Bench
MPM Clamp for LSTBench Set, incl. LSTFixing Grips
2500-220 C4 890 EUR
software for parameter measurement: E modulus, loss factorMPM - MaterialParameter Measurement KA3, DA22500-210 C4 1.900 EUR
sensor for B-field measurement, accessory for SCN or stand-alone with KA3/DA2BFS-Sensor KA3, DA22510-211 A11 735 EUR
data acquisition & post processing (SCN Vibrometer Setrequired)
find best matching pairs from a pool of speakersMSP - Match-Speaker-Tool Dongle4000-220 S15 1.900 EUR ü
Software Add-ons*synchronizing digital audio (e.g. Bluetooth); option for QC-Task(QC-STANDARD or QC-Task required)
SYN - ExternalSynchronization KA3, PA1001-107 S32 1.400 EUR ü
coping with noisy environment; option for SPL Task (QC-STANDARD or SPL Task required)
PNI - Production NoiseImmunity KA3, PA4000-250 S21 2.300 EUR ü
defect detection beyond human hearing; option for SPL Task(QC STANDARD or SPL Task required)
MHT - Meta HearingTechnology KA3, PA4000-200 S20 1.370 EUR ü
QC-Task: integration of external measurement equipment(GPIB)EXD - External Devices Dongle4000-241 S31 1.000 EUR ü
QC-Task: adjustment to user defined response (automatically ormanually)
EQA - Equalization &Alignment Standard KA3, PA4000-245 S33 680 EUR ü
QC-Task: measurement of AC/DC displacement with laser;option for SPL Task (QC STANDARD or SPL Task required, DCinput modification of Production Analyzer Hardware required)
DCX - Dynamic DCCheck (beta-version) KA3, PA4000-270 3.200 EUR ü
KLIPPEL Analyzer System Price-List
Klippel GmbH, Germany Effective as from 05/09/2017Tel. +49-351-501 939 0, Fax. +49-351-501 939 10 Page 5/[email protected], www.klippel.de Currency EUR
All prices net, EXW (tax, duty, transportation, support extra)
Item No. Product Explanation required HW Spec Price per Unit QC-EOL
R&D Software Updatesproject management software update to current version incl.existing modules
galvanic decoupling and testing of all GPIO in and outputs,including cable DB25 male - DB25 female, 1,8mI/O Tester, Set2800-300 A6 260 EUR
Module price per 1 license, running on 1 hardware unit or 1 USB dongle.
Prices for accessories from other suppliers (microphones, lasers, amplifiers) are valid only in combination with KLIPPEL R&D or QC System.Also available on request:- Various types of microphones from Microtech Gefell and G.R.A.S.- Several cables
This document is subject to change without notice. Errors and omissions excepted.