www.klinger.co.at KLINGERSIL ® C-4106 KLINGERSIL ® C-4106 is a special gasket for a wide range of industrial applications. It is also suitable for the use with low bolt loads. Synthetic fibres and cork, bonded with NBR. This sealing material shows an excellent conformity at low sur- face pressure. referring to KLINGERSIL ® product range » High compressibility » Use of the natural properties of cork » Dimensionally stable Key features: » Provides excellent adaptability to any sealing surface » Conforms easily » Excellent sealing at low stress Benefits: Properties: Industries: SUPERIOR EXCELLENT VERY GOOD GOOD MODERATE MECHANICAL RESISTANCE THERMAL RESISTANCE SEALABILITY CHEMICAL RESISTANCE TRANSPORT OIL & GAS INFRASTRUCTURE ENERGY INDUSTRY CHEMICAL PULP & PAPER FOOD & BEVERAGES PHARMA Not available Certificates and approvals:
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.klinger.co.at
KLINGERSIL® C-4106KLINGERSIL® C-4106 is a special gasket for a wide range of industrial applications. It is also suitable for the use with low bolt loads.
Synthetic fibres and cork, bonded with NBR.This sealing material shows an excellent conformity at low sur-face pressure.
referring to KLINGERSIL® product range
» High compressibility » Use of the natural properties of cork » Dimensionally stable
Key features:
» Provides excellent adaptability to any sealing surface » Conforms easily » Excellent sealing at low stress
Benefits:
Properties:
Industries:
SUPERIOR
EXCELLENT
VERY GOOD
GOOD
MODERATE
MECHANICALRESISTANCE
THERMALRESISTANCE
SEALABILITY CHEMICALRESISTANCE
TRANSPORTOIL & GAS INFRASTRUCTUREENERGYINDUSTRY CHEMICAL PULP & PAPER FOOD & BEVERAGES
PHARMA
Not available
Certificates and approvals:
www.klinger.co.at
Compressibility ASTM F 36 J % 30
Recovery ASTM F 36 J % 50
Stress relaxation DIN 52913 25 MPa, 16 h/100°C MPa 15
KLINGER cold/hot compression thickness decrease at 23°C % 16
Certified acc. to DIN EN ISO 9001:2008 Subject to technical alterations. Status: March 2016
Rich. Klinger Dichtungstechnik GmbH & Co KG » Am Kanal 8-10 » A-2352 Gumpoldskirchen, AustriaTel +43 (0) 2252/62599-137 » Fax +43 (0) 2252/62599-296 » e-mail: [email protected]
1000 x 1500 mm, 2000 x 1500 mm
0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm
Thicknesses:
Thickness acc. DIN 28091-1Length 50 mm, width 50 mm
Other thicknesses, sizes and tolerances on request.
Tolerances:
Dimensions of the standard sheets:
Sizes:
In area one, the gasket material is normally sui-table subject to chemical compatibility.
In area two, the gasket material may be suitable but a technical evaluation is recommended.
In area three, do not in- stall the gasket without a technical evaluation.
Always refer to the che-mical resistance of the gasket to the media.
2 31
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
3
2 1
3
2 1
3
2 1
www.klinger.co.at
KLINGERSIL® C4265KLINGERSIL® C-4265 is a gasket for liquids and gase-ous media at lower pressures, temperatures and low bolt loads. It offers a good resistance to oils, hydrocarbons, refrigerants and other chemicals and shows an excellent conformity with the flanges at low surface loads.
Mineral fibres bonded with NBR. Suitable for a wide range of applications including oils, sol-vents, steam and gases. Excellent conformity with the flanges at low surface loads.
» High compressibility » Excellent spring back behavior » Resistant to creep and cold flow » Dimensionally stable » Consistent material composition
Key features:
» Provides superior adaptability to any sealing surface » Seals irregular flanges » Conforms easily » Excellent sealing at low stress » Increased resistance against refrigerants
KLINGERSIL® C-4324KLINGERSIL® C-4324 is a universal high-pressure gasket, suitable for a wide range of applications.
Combination of synthetic high performance fibres, bonded with NBR.This gasket material is suitable for the use in liquids and steam at lower pressure and temperature. Resistant to water, oils, hydrocarbons and many other chemicals.
» General purpose gasket material » Dimensionally stable » Consistent material composition
Average specific volume resistance ρD Ω cm 4.3x10E11
Average dielectric strength Ed kV/mm 12
Average power factor 50 Hz tan δ 0.109
Average dielectric coefficient 50 Hz εr 9
Thermal conductivity λ W/mK 0.50
Classification acc. to BS 7531:2006 Grade Y
ASME-Code sealing factors
for gasket thickness 1.0 mm tightness class 0.1 mg/s x m MPa y 15
m 2.2
for gasket thickness 2.0 mm tightness class 0.1 mg/s x m MPa y 15
m 2.6
for gasket thickness 3.0 mm tightness class 0.1 mg/s x m MPa y 15
m 4.1
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
32
1
3
2
1
3
2 1
www.klinger.co.at
KLINGERSIL® C-4400KLINGERSIL® C-4400 is a universal material for safe and reliable sealing. It consists of a unique matrix, which of-fers an excellent combination of different properties.
Aramid fibres bonded with NBR.Resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocar-bons, lubricants and refrigerants.
» Universal high pressure gasket material » Dimensionally stable » Consistent material composition
Key features:
» Excellent price/performance ratio » Suitable for many different media » Very good resistance to refrigerants
Average specific volume resistance ρD Ω cm 1.2x10E12
Average dielectric strength Ed kV/mm 21.6
Average power factor 50 Hz tan δ 0.131
Average dielectric coefficient 50 Hz εr 9.2
Thermal conductivity λ W/mK 0.42
Classification acc. to BS 7531:2006 Grade AY
ASME-Code sealing factors
for gasket thickness 1.0 mm tightness class 0.1mg/s x m MPa y 15
m 1.2
for gasket thickness 2.0 mm tightness class 0.1mg/s x m MPa y 15
m 1.6
for gasket thickness 3.0 mm tightness class 0.1mg/s x m MPa y 15
m 4.0
www.klinger.co.at
KLINGERSIL® C-4408KLINGERSIL® C-4408 is suitable for high stress due to wire reinforcement. It is a universal high-pressure gasket for the use in a wide range of industrial applications.
Aramid fibres bonded with NBR.Resistant to oils, water, steam, gases, fuels, alcohols, hy-drocarbons, lubricants and refrigerants.
» Wire reinforcement » Improved stress relaxation
» German Lloyd
Key features:
» Suitable for higher pressures » Higher resistance against blow-outs » More safety at high internal pressures
KLINGERSIL® C-4409KLINGERSIL® C-4409 offers more safety at high thermal and mechanical stress. Due to the expanded metal, this special high-pressure gasket is suitable for high loads.
Synthetic fibres bonded with NBR.Chemical resistance to oils, water, steam, hydrocarbons as well as to liquid and gaseous chemicals.
» Expanded metal reinforcement » Improved stress relaxation
» German Lloyd » TA-Luft (Clean air)
Key features:
» Suitable for higher pressures » Higher resistance against blow-outs » More safety at high internal pressures
for gasket thickness 1.0 mm tightness class 0.1 mg/s x m MPa y 30
m 3.0
for gasket thickness 2.0 mm tightness class 0.1 mg/s x m MPa y 30
m 3.2
for gasket thickness 3.0 mm tightness class 0.1 mg/s x m MPa y 30
m 3.8
1000 x 1500 mm, 2000 x 1500 mm
1000 x 1230 mm, 2000 x 1230 mm
Sizes KLINGERSIL® C-4409 L:
Thickness acc. DIN 28091-1Length 50 mm, width 50 mm
Other thicknesses, sizes and tolerances on request.
Tolerances:Sizes KLINGERSIL® C-4409:
1.0 mm, 1.5 mm
Thicknesses:
www.klinger.co.at
KLINGERSIL® C-4430KLINGERSIL® C-4430 offers outstanding stress retention and resistance to hot water and steam.
Optimum combination of synthetic fibres, bonded with NBR.Resistant to water and steam at higher temperatures as well as to oils, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants.
» Optimum combination of synthetic and glass fibres » Outstanding stress relaxation » Dimensionally stable
» BAM-tested » DIN-DVGW » DIN-DVGW W 270 » DVGW VP 401 » Elastomer-Guideline » WRAS approval » German Lloyd » TA-Luft (Clean air) » Fire-Safe acc. to DIN EN ISO 10497 » Fire-Safe acc. to ISO 19921
Key features:
» Suitable for high temperature steam and water » Better resistance against hydrocarbons » Suitable for many different media
Average specific volume resistance ρD Ω cm 4.5x10E12
Average dielectric strength Ed kV/mm 21.3
Average power factor 50 Hz tan δ 0.03
Average dielectric coefficient 50 Hz εr 6.7
Thermal conductivity λ W/mK 0.38
Classification acc. to BS 7531:2006 Grade AX
ASME-Code sealing factors
for gasket thickness 1.0 mm tightness class 0.1 mg/s x m MPa y 20
m 1.1
for gasket thickness 2.0 mm tightness class 0.1 mg/s x m MPa y 20
m 1.6
for gasket thickness 3.0 mm tightness class 0.1 mg/s x m MPa y 20
m 2.2
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
3
2
1
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
3
2
1
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
3
2
1
www.klinger.co.at
KLINGERSIL® C-4500KLINGERSIL® C-4500 is a premium quality high-pressure gasket especially suitable for use with high temperature alkaline media and superheated steam.It is a superior performance product designed for the use in the chemical industry.
Carbon fibres and special heat resistant additives, bonded with NBR.Suitable for use with alkaline media and steam at higher tem-peratures as well as to oils, gases, salt solutions, fuels, alco-hols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants.
» Utilization of carbon fibres » Heat resistant additives » Resistant to creep and cold flow » Dimensionally stable
» BAM-tested » DIN-DVGW » DIN-DVGW W 270 » Elastomer-Guideline » ÖVGW » German Lloyd » TA-Luft (Clean air) » Fire-Safe acc. to DIN EN ISO 10497
Key features:
» Suitable for high temperature alkaline media » Suitable for superheated steam
for gasket thickness 1.0 mm tightness class 0.1 mg/s x m MPa y 20
m 1.0
for gasket thickness 2.0 mm tightness class 0.1 mg/s x m MPa y 20
m 1.6
for gasket thickness 3.0 mm tightness class 0.1 mg/s x m MPa y 20
m 2.0
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
3
2
1
3
2
1
3
2
1
www.klinger.co.at
KLINGERSIL® C-4509KLINGERSIL® C-4509 is a special high-pressure gasket for highest thermal and mechanical stresses.Due to the expanded metal reinforcement it offers a high stress capability and is suitable for high bolt loads. The basic material KLINGERSIL® C-4500 is a Fire Safe grade.
Carbon fibres and special high temperature resistant additi-ves, bonded with NBR.Made from high-tech materials it offers excellent service in many sectors of the chemical industry. Main fields of applica-tion: alkaline media and steam.
» Utilization of carbon fibres » Expanded metal reinforcement » Improved stress relaxation
» German Lloyd
Key features:
» Suitable for high-pressure applications » Higher resistance against blow-outs » More safety at high internal pressures
for gasket thickness 1.0 mm tightness class 0.1 mg/s x m MPa y 30
m 3.1
for gasket thickness 2.0 mm tightness class 0.1 mg/s x m MPa y 30
m 4.4
for gasket thickness 3.0 mm tightness class 0.1 mg/s x m MPa y 30
m 6.0
1.0 mm, 1.5 mm
Thicknesses:
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
3
2
1
-2000
20
30
40
50
60
70
80
90
100
0°C 100 200 300 400-100
pib
ar
3
2
1
www.klinger.co.at
KLINGERSIL® C-6327Swelling in oil and fuels KLINGERSIL® C-6327offers an excellent conformity with flanges at low surface loads.
Aramid fibres and inorganic fibres bonded with SBR.Fields of application: Body gaskets for liquids and steam at lower pressures and temperatures and low bolt loads, e.g. transformer gaskets.
» Use of SBR rubber as binder » High compressibility
» German Lloyd
Key features:
» Controlled swelling in oils and fuels » Provides very good adaptability to any sealing surface » Conforms easily » Excellent sealing at low stress » Improved radiation resistance
Benefits:
Properties:
Industries:
SUPERIOR
EXCELLENT
VERY GOOD
GOOD
MODERATE
MECHANICALRESISTANCE
THERMALRESISTANCE
SEALABILITY CHEMICALRESISTANCE
Certificates and approvals:
OIL & GAS TRANSPORTINFRASTRUCTUREENERGYINDUSTRY
referring to KLINGERSIL® product range
CHEMICAL FOOD & BEVERAGES
PHARMAPULP & PAPER
www.klinger.co.at
Compressibility ASTM F 36 J % 25
Recovery ASTM F 36 J % 45
Stress relaxation DIN 52913 50 MPa, 16 h/175°C MPa 25
KLINGER cold/hot compression thickness decrease at 23°C % 20