KLINGER ® KGS/VD The first infinitely adjustable gasket max. 8° The two-piece adjustable gasket compensates slanted positions of flanges up to approx. 8°. Ideal in pipeline construction, simple in use and favourable in price. KLINGER – worldwide leader in gaskets
4
Embed
KLINGE RKGS/VD · KLINGER ®KGS/VD gasket enables simple and cost-effective sealing in case of slant positions of flanges. Extensive construction measures can thus be dispensed with.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
KLINGER®
KGS/VD The first infinitely adjustable gasket
max. 8°
The two-piece adjustable gasket compensates slanted positions of flanges
up to approx. 8°.Ideal in pipeline construction,
simple in use and favourable in price.
KLINGER – worldwide leader in gaskets
KLINGER®
KGS/VD The first infinitely adjustable gasket
Slant positions occur with all flangeconnections. Buried pipes in particular where adaptors and flanges are fitted to,e.g. hydrants and valves, cannot always be put in a straight line according to the drawing (or plan).
The new, adjustable KLINGER®
KGS/VD gasket replaces, simplyand highly economically, the wedgedisks made of cast iron, cast orsteel that were used in these casesup to now.
These heavy wedge disks, elaborately installed, even requiretwo additional seals, leading toinaccurate mounting and highercosts.
The consequence: inaccuratemounting, higher costs.
Complicated handling in the narrowest of spaces using thesemetal elements cause uncertainty inmounting and increase the risk ofleaks.
Manufacturing special fittingscan be droppedThe usual elbows made of GGG(ductile cast iron), steel or plasticbegin with 11.25°. The adjustable KLINGER®KGS/VDgasket makes it possible to coverthe range from 0° to 8°, while theremaining 3.25° are solved by otherconstructional measures.
The KLINGER®KGS/VD can beused as adaptor or extension piece,for instance.
Special features, such and screwlength and size, can be found in thetables on the back.
The adjustable gasket consists of two positive-locking parts.Due to this particular construction, the new KLINGER®KGS/VD gasket enables simple andcost-effective sealing in case of slant positions offlanges. Extensive construction measures canthus be dispensed with. Slant positions can be infinitely aligned up toapprox. 8°.
Adjustable from 0° to approx. 8°
4
With rising waterpressure or ground
water, the KLINGER®
Wall Collar protectsagainst penetrating
moisture
Pipes that are notinstalled in parallel can
be connected in a cost-effective way byusing the adjustable
gasket
1
KLINGER®
KGS/VD The first infinitely adjustable gasket
31 2 4
Slant pipe positionsare compensated ina cost-effective way
by using the adjustablegasket
By means ofthe adjustable gasket,minor bends can be
installed withoutspecial fittings in a cost-effective way
Subject to technical changes.No responsibility is accepted for theaccuracy of this information.Status: May 2015G
rafik
-Des
ign
Udo
Wam
per
2/20
15
n Dimensions according to DIN EN 1514-1The adjustable gasket KGS/VD is currently available from DN 32 toDN 500; further dimensions on request.
Deviating dimensions from DIN EN 1514-1 n for PN 16 and PN 25.Only concerns the dimensions DN 300, 350 and 400 (the gaskets fit to the sealing strip ofa flange PN 16, acc. to EN 1092-1and -2). n for PN 25.Only concerns the dimensions DN 125 and DN 200.n Screw length only for fix flanges.
n The KLINGER®KGS/VD is manufactured by default fromEPDM. According to its conditions of use,however, it can also be manufac-tured from other elastomers, such as FKM (Viton) or silicon.
Tightening torques on request.
Dickemin.
Außen-Durchmesser
Innen-Durchmesser
Dickemax.
n Dimensions acc. to ANSI,B16.21The adjustable gasket KGS/VD iscurrently available from 3” to 16”;further dimensions on request.