K&L #37-2899 Strongarm 2 Kit Assembly Instructions

K&L Strongarm IIK&L #37-2899 Strongarm 2 KitAssembly Instructions

K&L Supply Co., Inc.1040 Richard Ave. Santa Clara, CA. 95050 PH:408-727-6767 Fax:408-727-4842 www.klsupply.com

StRongARm Ⅱ Assembly Instructions

K&L #37-2899

Thank you for purchasing this K&L product. Please inspect this unit for damaged / missing parts prior to use.

K&L Supply Co., Inc.1040 Richard Ave. Santa Clara, CA. 95050 PH:408-727-6767 Fax:408-727-4842 www.klsupply.com

1. PARtS InCLUDED - Strongarm2

KLInSt:2899-11A

2. InSPECtIon - Inspect Package For Content

3. PARtS LISt

K&L# 37-2899

K&L #37-2899K&L STRONGARM Ⅱ

4. Assemble 1) Inspect Packaging for Contents and damage 2) Remove StrongarmII from Box 3) If your Tire Machine contains an air filler gauge hook (refer to pic 1), remove now, if it does not please proceed to step 4 4) Remove the main body of strongarm from box and remove #631 (pic 2) screws to access #608 bolt (pic 3) 5) Remove the swingarm boom 6) Loosen #608 bolt Slide #6 main shaft upward and attach #4 swingarm onto #3 slide (pic 4)

7) tighten the #608 bolt and reinstall #631 screws. Cylinder case, main body and swingarm should be 1 unit.

8) Attach #619 lever to swingarm boom (pic 5)9) Attach Swingarm to tire machine tower using #2 support and supplied

Bolts. Pic 6 (Use the appropriate length of bolts for the tire machine. Bolt Holes closest to Swingarm, bolt head should face rearward)

10) Attach #8 Adjust Bar to #5 swingarmB. Attach #615 Knob and #616 Flat-Washer to top of Bar.

11) Attach 35-0022 Strong Arm Foot to #8 Adjust Bar. (Place Ball Bearing inside foot and attach roll pin) Pic 7

12) Attach the appropriate size hose to one touch fitting (4mm hose to 4mm fitting, 6mm hose to 6mm fitting) Pic 813) Attach 35-2488 to #630 fitting (pic 9) 14) Attach 35-0178 t-Fitting to Regulator on tire machine (pic 10)15) Attach 35-2488 and your own personal air fitting to the 35-0178 t-Fitting. (Pic 11)16) Attach 35-2892 30” hose to each 35-2488 (pic 12)17) Connect Shop air line to t-Fitting 18) Check for air Leaks

(pic 10)

K&L# 37-2899

(pic 2)

#631 Screws

Remove Screws

(pic 1)

(pic 3)

Loosen #608

gauge Hook

(pic 5)

#619 Lever

(pic 4)

#3

#4#6 Shaft

(pic 6)

#2 Support

(pic 7)35-0022

(pic 8)

6mm4mm

(pic 11)

(pic 9)35-2488

35-2488

(pic 12)35-2488

35-2892

Air Fitting

KLInSt:2899-11A

K&L Supply Co., Inc.1040 Richard Ave. Santa Clara, CA. 95050 PH:408-727-6767 Fax:408-727-4842 www.klsupply.com

K&L Supply Co., Inc.1040 Richard Ave. Santa Clara, CA. 95050 PH:408-727-6767 Fax:408-727-4842 www.klsupply.com