RIGLESS WELL INTEGRITY & INTERVENTION ISOLATIONS kciltd.co.uk Kinetics Controls & Innovation Ltd
RIGLESS WELL INTEGRITY & INTERVENTION ISOLATIONS
kciltd.co.uk
Units 6 & 7, 1 Kirkhill Place Kirkhill Industrial Estate, Dyce Aberdeen AB21 0GU, UK
T: +44 (0) 1224 255480E: [email protected]
kciltd.co.ukde
sig
ne
d &
pro
du
ced
by XIC
.co
m
Kinetics Controls & Innovation Ltd
Kinetics Controls & Innovation Ltd
Challenge us to Resolve Leak or Corrosion Anomalies
Engineered Isolation Solutions with Vision
Energise Seals by Fluid Dynamics
Comply with Well Integrity Best Practice
Regain Well Isolation Boundaries Quickly & Efficiently
Resolve Sustained Annulus Pressure Variances
Stop Packer Leaks with our Downhole Sealant Technology
Low Cost Rigless Operations with 24/7 Customer Support of Worldwide Aging
Assets
Hand Portable Equipment with Small Footprint & Minimal Personnel
Reduce Costs on Greenfield & Brownfield Applications Offshore, Onshore & Subsea
Address Unique Well Challenges with our Premium Service
Extend the Life of your Assets & Reduce Future Maintenance Costs
BESPOKE SEALANT MANUFACTURER
Rigless Well Integrity & Intervention Isolations
Ball Valve Isolations & Pipeline Pigging
Mac-Pac – Isolates Gate Valve & Wellhead Pack-Offs
Deployed as a high viscous fluid, very effective alternative to plastic packing & ideal for re-energising damaged “P” seals.
• Provides a Repeatable Isolation for Failed Gate Valves & Valve Stem Packing Leaks
• Remains in the Valve Cavity Much Longer than Standard Grease
• Provides Protection Against Well Debris & Corrosive Fluids
• Operational Temperature of -50° to +250°C
• Displace & Replace Existing Valve Grease Providing a Superior High Temperature Lubricant
• No Issues with Future Valve Operating Torque, Production Flow, Wireline or Coiled Tubing Activity
Mac-Seal & MS-Sealant – Isolation of Wellhead Weight Set & Mandrel Casing Hangers
Two part, time activated, various viscosity sealant which self-energises under differential pressure. Bridges large gaps & holes in seal structures unlike pressure activated sealants which require small gaps & high pressures to activate.
Rigless Isolations successfully deployed worldwide reinstating barriers to maintain safe & effective production.
• Protect Environmental Gasket between Wellhead Spools
• Isolate Lockdown Screw Packing
• Safeguard Failed Injection Fittings
• Reinstate Void Casing Slab Seals & Pack-Off’s
Wellhead Barrier Protection for Safe Production
Gate Valve Isolation
Pipeline Isolation Pigging & Flushing Products
Downhole Annulus Isolations
Control Line Isolations & Plugging
Abandonments & Decommissioning
The Innovation in KCI’s business comes from employing its Engineering expertise to support complex problems which may be difficult to resolve with conventional methods or technologies.
KCI products & services are recognised as examples of best practice for engineered leak sealing solutions for the worldwide oil, gas, process & renewable sectors, securing the company’s strong reputation & integrity values.
KCI provide fully engineered products & services which increase safety, reduce costs, minimise downtime & maintain or increase production across surface, subsea, downhole, topside, pipeline, refinery, process plant & many other applications.
IBS-SB (Isolation Barrier System) - Annulus Isolations, Abandonments & Packer Leaks
Designed & formulated to provide isolations within annuli preventing gas migration. IBS-SB can be weighted to sink through existing heavy fluids. Small volumes required, no squeezing or bull heading required. Ideal for:
• Production Packer Element Damage
• Damaged Cement Shoe
• Micro Annuli or Porosity issues
• Simple & Effective
• Very High Success Rate
IBS-S & IBS-SX (Isolation Barrier System) - Pipeline Cleaning & Support Gels
KCI provide various products in support of Pipeline Intervention on behalf of KES (KCI Energy Services). These products are bespoke to their application & support low or high volume gels incorporating a high degree of pipeline engineering.
• Dewatering
• Degreasing Pipelines
• Pipeline Ball Valve Isolation
• A Safe & Cost Effective Alternative to Freezing Applications
KCI IS A GLOBAL PROVIDER OF BESPOKE ENGINEERED LEAK SEALING SOLUTIONS FOR MATURE OR AGING OIL & GAS FACILITIES.
MHS-Protect
• Designed & Formulated to be Applied Directly on to Most Surface Areas
• Very Little Preparation Required for Corrosion Protection
• Cost Effective to Apply
• Reduces Downtime Costs when Removing Nuts & Bolts
MHS-Protect extends the life of the asset. It is easy to apply & remove across various applications.
Insert to UV. Power wash to clean before & after application with K Cleanse 100 recommended.
ClosedBallValveFilledWithIBS
Mac-Pac
Valve Isolation Supporting Through Tubing Intervention
IBS-SB
Packer Isolation & Annulus Gas Migration Issues
Mac-Seal & MS-Sealant
Wellhead & Tubing Seal Isolation
IBS-S & IBS-SX (KES)
Ball Valve Isolation Pipeline Dewatering & Degreasing Pigs Cleaning & Pick up Gels
Before After
Annulus Management
Packer at 500 angle wth
IBS-SB deployed above
Gate Valve Isolation
Wellhead Seal Isolation
Ball Valve Isolation
IBSPigAgainstClosedBallValve
IBS (Isolation Barrier System)
The IBS range of products has been created & formulated to meet UK certification & is now available with a new environmentally friendly alternative.
• Suitable for 2” to 36” Pipelines
• Removed as a Solid or Broken Back to a Fluid & Flushed Out
• IBS Breaker is 97% Water & has a pH Value of 6-7
Tapered Pig Former 24” Ball Valve Isolation
IBS Isolation against 60bar system pressure.
Two confirmed IBS Ball Valve Isolations in-situ with the Pig Launcher Door Open
for inspection & Pig launch
Cured IBS visible at leak paths around closed Ball Valve
Tapered Pig
Parallel Pig
Tapered Pig Profile Designed for Degreasing
Parallel Pig Profile Designed for Pigging & the Isolation
of Ball Valves
K Cleanse 100
K Cleanse 100 cleaner is designed to be used in a hydrocarbon, drilling & pipeline environment. It can be used as supplied or pre-diluted with potable water to the required concentration. It can be applied as a contact dip with a brush, complete immersion depending on size of equipment & affected mechanical components or by power washer application to outside plant.
K Scav Gel 100
K Scav Gel 100 is polymer based & buff coloured as standard, but can be colour coded if required. The product has been developed primarily as a pick-up & cleaning gel & can be introduced to the plant directly into the pipe, valve or other variations of Pig applications. The K Scav Gel 100 is propelled by fluid or gas mediums. The pH value of the Scavenger Gel is 5-7.
K MGel 101
K MGel 101 is used predominantly in pipelines & spool pieces for commissioning & decommissioning operations. It can be utilised for Pigging operations & also injected into individual spool pieces as an pre-commissioning storage inhibitor.
IBS-TG Compound
IBS-TG has been designed & formulated to quickly isolate leaking valves which have a recorded differential pressure flow across them. It can be pre-cured & injected for small volumes or crosslinked while injecting into the cavity or space where it instantaneously cures & solidifies into a tough flexible gel that will create an isolation. In certain applications IBS-TG can be quickly broken down to fluid by using KES specialist IBS-TG Breaker.
Anti-Corrosion Products
MHS-Protect for trouble free access to
studs & nuts
MHS-Protect-01 flows around cables to seal
MHS-Protect is easily removed for inspection
or maintenance
| Wellheads
| Onshore
| Process Plant
| Offshore
| Downhole
| Subsea
Rigless Well Integrity & Intervention Isolations
Ball Valve Isolations & Pipeline Pigging
Mac-Pac – Isolates Gate Valve & Wellhead Pack-Offs
Deployed as a high viscous fluid, very effective alternative to plastic packing & ideal for re-energising damaged “P” seals.
• Provides a Repeatable Isolation for Failed Gate Valves & Valve Stem Packing Leaks
• Remains in the Valve Cavity Much Longer than Standard Grease
• Provides Protection Against Well Debris & Corrosive Fluids
• Operational Temperature of -50° to +250°C
• Displace & Replace Existing Valve Grease Providing a Superior High Temperature Lubricant
• No Issues with Future Valve Operating Torque, Production Flow, Wireline or Coiled Tubing Activity
Mac-Seal & MS-Sealant – Isolation of Wellhead Weight Set & Mandrel Casing Hangers
Two part, time activated, various viscosity sealant which self-energises under differential pressure. Bridges large gaps & holes in seal structures unlike pressure activated sealants which require small gaps & high pressures to activate.
Rigless Isolations successfully deployed worldwide reinstating barriers to maintain safe & effective production.
• Protect Environmental Gasket between Wellhead Spools
• Isolate Lockdown Screw Packing
• Safeguard Failed Injection Fittings
• Reinstate Void Casing Slab Seals & Pack-Off’s
Wellhead Barrier Protection for Safe Production
Gate Valve Isolation
Pipeline Isolation Pigging & Flushing Products
Downhole Annulus Isolations
Control Line Isolations & Plugging
Abandonments & Decommissioning
The Innovation in KCI’s business comes from employing its Engineering expertise to support complex problems which may be difficult to resolve with conventional methods or technologies.
KCI products & services are recognised as examples of best practice for engineered leak sealing solutions for the worldwide oil, gas, process & renewable sectors, securing the company’s strong reputation & integrity values.
KCI provide fully engineered products & services which increase safety, reduce costs, minimise downtime & maintain or increase production across surface, subsea, downhole, topside, pipeline, refinery, process plant & many other applications.
IBS-SB (Isolation Barrier System) - Annulus Isolations, Abandonments & Packer Leaks
Designed & formulated to provide isolations within annuli preventing gas migration. IBS-SB can be weighted to sink through existing heavy fluids. Small volumes required, no squeezing or bull heading required. Ideal for:
• Production Packer Element Damage
• Damaged Cement Shoe
• Micro Annuli or Porosity issues
• Simple & Effective
• Very High Success Rate
IBS-S & IBS-SX (Isolation Barrier System) - Pipeline Cleaning & Support Gels
KCI provide various products in support of Pipeline Intervention on behalf of KES (KCI Energy Services). These products are bespoke to their application & support low or high volume gels incorporating a high degree of pipeline engineering.
• Dewatering
• Degreasing Pipelines
• Pipeline Ball Valve Isolation
• A Safe & Cost Effective Alternative to Freezing Applications
KCI IS A GLOBAL PROVIDER OF BESPOKE ENGINEERED LEAK SEALING SOLUTIONS FOR MATURE OR AGING OIL & GAS FACILITIES.
MHS-Protect
• Designed & Formulated to be Applied Directly on to Most Surface Areas
• Very Little Preparation Required for Corrosion Protection
• Cost Effective to Apply
• Reduces Downtime Costs when Removing Nuts & Bolts
MHS-Protect extends the life of the asset. It is easy to apply & remove across various applications.
Insert to UV. Power wash to clean before & after application with K Cleanse 100 recommended.
ClosedBallValveFilledWithIBS
Mac-Pac
Valve Isolation Supporting Through Tubing Intervention
IBS-SB
Packer Isolation & Annulus Gas Migration Issues
Mac-Seal & MS-Sealant
Wellhead & Tubing Seal Isolation
IBS-S & IBS-SX (KES)
Ball Valve Isolation Pipeline Dewatering & Degreasing Pigs Cleaning & Pick up Gels
Before After
Annulus Management
Packer at 500 angle wth
IBS-SB deployed above
Gate Valve Isolation
Wellhead Seal Isolation
Ball Valve Isolation
IBSPigAgainstClosedBallValve
IBS (Isolation Barrier System)
The IBS range of products has been created & formulated to meet UK certification & is now available with a new environmentally friendly alternative.
• Suitable for 2” to 36” Pipelines
• Removed as a Solid or Broken Back to a Fluid & Flushed Out
• IBS Breaker is 97% Water & has a pH Value of 6-7
Tapered Pig Former 24” Ball Valve Isolation
IBS Isolation against 60bar system pressure.
Two confirmed IBS Ball Valve Isolations in-situ with the Pig Launcher Door Open
for inspection & Pig launch
Cured IBS visible at leak paths around closed Ball Valve
Tapered Pig
Parallel Pig
Tapered Pig Profile Designed for Degreasing
Parallel Pig Profile Designed for Pigging & the Isolation
of Ball Valves
K Cleanse 100
K Cleanse 100 cleaner is designed to be used in a hydrocarbon, drilling & pipeline environment. It can be used as supplied or pre-diluted with potable water to the required concentration. It can be applied as a contact dip with a brush, complete immersion depending on size of equipment & affected mechanical components or by power washer application to outside plant.
K Scav Gel 100
K Scav Gel 100 is polymer based & buff coloured as standard, but can be colour coded if required. The product has been developed primarily as a pick-up & cleaning gel & can be introduced to the plant directly into the pipe, valve or other variations of Pig applications. The K Scav Gel 100 is propelled by fluid or gas mediums. The pH value of the Scavenger Gel is 5-7.
K MGel 101
K MGel 101 is used predominantly in pipelines & spool pieces for commissioning & decommissioning operations. It can be utilised for Pigging operations & also injected into individual spool pieces as an pre-commissioning storage inhibitor.
IBS-TG Compound
IBS-TG has been designed & formulated to quickly isolate leaking valves which have a recorded differential pressure flow across them. It can be pre-cured & injected for small volumes or crosslinked while injecting into the cavity or space where it instantaneously cures & solidifies into a tough flexible gel that will create an isolation. In certain applications IBS-TG can be quickly broken down to fluid by using KES specialist IBS-TG Breaker.
Anti-Corrosion Products
MHS-Protect for trouble free access to
studs & nuts
MHS-Protect-01 flows around cables to seal
MHS-Protect is easily removed for inspection
or maintenance
| Wellheads
| Onshore
| Process Plant
| Offshore
| Downhole
| Subsea
Rigless Well Integrity & Intervention Isolations
Ball Valve Isolations & Pipeline Pigging
Mac-Pac – Isolates Gate Valve & Wellhead Pack-Offs
Deployed as a high viscous fluid, very effective alternative to plastic packing & ideal for re-energising damaged “P” seals.
• Provides a Repeatable Isolation for Failed Gate Valves & Valve Stem Packing Leaks
• Remains in the Valve Cavity Much Longer than Standard Grease
• Provides Protection Against Well Debris & Corrosive Fluids
• Operational Temperature of -50° to +250°C
• Displace & Replace Existing Valve Grease Providing a Superior High Temperature Lubricant
• No Issues with Future Valve Operating Torque, Production Flow, Wireline or Coiled Tubing Activity
Mac-Seal & MS-Sealant – Isolation of Wellhead Weight Set & Mandrel Casing Hangers
Two part, time activated, various viscosity sealant which self-energises under differential pressure. Bridges large gaps & holes in seal structures unlike pressure activated sealants which require small gaps & high pressures to activate.
Rigless Isolations successfully deployed worldwide reinstating barriers to maintain safe & effective production.
• Protect Environmental Gasket between Wellhead Spools
• Isolate Lockdown Screw Packing
• Safeguard Failed Injection Fittings
• Reinstate Void Casing Slab Seals & Pack-Off’s
Wellhead Barrier Protection for Safe Production
Gate Valve Isolation
Pipeline Isolation Pigging & Flushing Products
Downhole Annulus Isolations
Control Line Isolations & Plugging
Abandonments & Decommissioning
The Innovation in KCI’s business comes from employing its Engineering expertise to support complex problems which may be difficult to resolve with conventional methods or technologies.
KCI products & services are recognised as examples of best practice for engineered leak sealing solutions for the worldwide oil, gas, process & renewable sectors, securing the company’s strong reputation & integrity values.
KCI provide fully engineered products & services which increase safety, reduce costs, minimise downtime & maintain or increase production across surface, subsea, downhole, topside, pipeline, refinery, process plant & many other applications.
IBS-SB (Isolation Barrier System) - Annulus Isolations, Abandonments & Packer Leaks
Designed & formulated to provide isolations within annuli preventing gas migration. IBS-SB can be weighted to sink through existing heavy fluids. Small volumes required, no squeezing or bull heading required. Ideal for:
• Production Packer Element Damage
• Damaged Cement Shoe
• Micro Annuli or Porosity issues
• Simple & Effective
• Very High Success Rate
IBS-S & IBS-SX (Isolation Barrier System) - Pipeline Cleaning & Support Gels
KCI provide various products in support of Pipeline Intervention on behalf of KES (KCI Energy Services). These products are bespoke to their application & support low or high volume gels incorporating a high degree of pipeline engineering.
• Dewatering
• Degreasing Pipelines
• Pipeline Ball Valve Isolation
• A Safe & Cost Effective Alternative to Freezing Applications
KCI IS A GLOBAL PROVIDER OF BESPOKE ENGINEERED LEAK SEALING SOLUTIONS FOR MATURE OR AGING OIL & GAS FACILITIES.
MHS-Protect
• Designed & Formulated to be Applied Directly on to Most Surface Areas
• Very Little Preparation Required for Corrosion Protection
• Cost Effective to Apply
• Reduces Downtime Costs when Removing Nuts & Bolts
MHS-Protect extends the life of the asset. It is easy to apply & remove across various applications.
Insert to UV. Power wash to clean before & after application with K Cleanse 100 recommended.
ClosedBallValveFilledWithIBS
Mac-Pac
Valve Isolation Supporting Through Tubing Intervention
IBS-SB
Packer Isolation & Annulus Gas Migration Issues
Mac-Seal & MS-Sealant
Wellhead & Tubing Seal Isolation
IBS-S & IBS-SX (KES)
Ball Valve Isolation Pipeline Dewatering & Degreasing Pigs Cleaning & Pick up Gels
Before After
Annulus Management
Packer at 500 angle wth
IBS-SB deployed above
Gate Valve Isolation
Wellhead Seal Isolation
Ball Valve Isolation
IBSPigAgainstClosedBallValve
IBS (Isolation Barrier System)
The IBS range of products has been created & formulated to meet UK certification & is now available with a new environmentally friendly alternative.
• Suitable for 2” to 36” Pipelines
• Removed as a Solid or Broken Back to a Fluid & Flushed Out
• IBS Breaker is 97% Water & has a pH Value of 6-7
Tapered Pig Former 24” Ball Valve Isolation
IBS Isolation against 60bar system pressure.
Two confirmed IBS Ball Valve Isolations in-situ with the Pig Launcher Door Open
for inspection & Pig launch
Cured IBS visible at leak paths around closed Ball Valve
Tapered Pig
Parallel Pig
Tapered Pig Profile Designed for Degreasing
Parallel Pig Profile Designed for Pigging & the Isolation
of Ball Valves
K Cleanse 100
K Cleanse 100 cleaner is designed to be used in a hydrocarbon, drilling & pipeline environment. It can be used as supplied or pre-diluted with potable water to the required concentration. It can be applied as a contact dip with a brush, complete immersion depending on size of equipment & affected mechanical components or by power washer application to outside plant.
K Scav Gel 100
K Scav Gel 100 is polymer based & buff coloured as standard, but can be colour coded if required. The product has been developed primarily as a pick-up & cleaning gel & can be introduced to the plant directly into the pipe, valve or other variations of Pig applications. The K Scav Gel 100 is propelled by fluid or gas mediums. The pH value of the Scavenger Gel is 5-7.
K MGel 101
K MGel 101 is used predominantly in pipelines & spool pieces for commissioning & decommissioning operations. It can be utilised for Pigging operations & also injected into individual spool pieces as an pre-commissioning storage inhibitor.
IBS-TG Compound
IBS-TG has been designed & formulated to quickly isolate leaking valves which have a recorded differential pressure flow across them. It can be pre-cured & injected for small volumes or crosslinked while injecting into the cavity or space where it instantaneously cures & solidifies into a tough flexible gel that will create an isolation. In certain applications IBS-TG can be quickly broken down to fluid by using KES specialist IBS-TG Breaker.
Anti-Corrosion Products
MHS-Protect for trouble free access to
studs & nuts
MHS-Protect-01 flows around cables to seal
MHS-Protect is easily removed for inspection
or maintenance
| Wellheads
| Onshore
| Process Plant
| Offshore
| Downhole
| Subsea
RIGLESS WELL INTEGRITY & INTERVENTION ISOLATIONS
kciltd.co.uk
Units 6 & 7, 1 Kirkhill Place Kirkhill Industrial Estate, Dyce Aberdeen AB21 0GU, UK
T: +44 (0) 1224 255480E: [email protected]
kciltd.co.ukde
sig
ne
d &
pro
du
ced
by XIC
.co
m
Kinetics Controls & Innovation Ltd
Kinetics Controls & Innovation Ltd
Challenge us to Resolve Leak or Corrosion Anomalies
Engineered Isolation Solutions with Vision
Energise Seals by Fluid Dynamics
Comply with Well Integrity Best Practice
Regain Well Isolation Boundaries Quickly & Efficiently
Resolve Sustained Annulus Pressure Variances
Stop Packer Leaks with our Downhole Sealant Technology
Low Cost Rigless Operations with 24/7 Customer Support of Worldwide Aging
Assets
Hand Portable Equipment with Small Footprint & Minimal Personnel
Reduce Costs on Greenfield & Brownfield Applications Offshore, Onshore & Subsea
Address Unique Well Challenges with our Premium Service
Extend the Life of your Assets & Reduce Future Maintenance Costs
BESPOKE SEALANT MANUFACTURER
RIGLESS WELL INTEGRITY & INTERVENTION ISOLATIONS
kciltd.co.uk
Units 6 & 7, 1 Kirkhill Place Kirkhill Industrial Estate, Dyce Aberdeen AB21 0GU, UK
T: +44 (0) 1224 255480E: [email protected]
kciltd.co.ukde
sig
ne
d &
pro
du
ced
by XIC
.co
m
Kinetics Controls & Innovation Ltd
Kinetics Controls & Innovation Ltd
Challenge us to Resolve Leak or Corrosion Anomalies
Engineered Isolation Solutions with Vision
Energise Seals by Fluid Dynamics
Comply with Well Integrity Best Practice
Regain Well Isolation Boundaries Quickly & Efficiently
Resolve Sustained Annulus Pressure Variances
Stop Packer Leaks with our Downhole Sealant Technology
Low Cost Rigless Operations with 24/7 Customer Support of Worldwide Aging
Assets
Hand Portable Equipment with Small Footprint & Minimal Personnel
Reduce Costs on Greenfield & Brownfield Applications Offshore, Onshore & Subsea
Address Unique Well Challenges with our Premium Service
Extend the Life of your Assets & Reduce Future Maintenance Costs
BESPOKE SEALANT MANUFACTURER