Page 1 of 2 References available upon request Career History Current position (Since January / 2015) Job Title: QA/QC Engineer Department: Quality Department Employer: Saudi Metal Art Work Co. Arabian Roots Group – Jeddah KSA Job Responsibilities: Prepare inspection and test plans (ITP), QC inspection reports, and acceptance criteria according to project specifications with respect to International standards such as AWS, ASME, ASTM, and ISO. Check approved shop drawing received from consultant or client repetitive. Prepare welding book (WPS, PQR, and Welders prequalification) to be submitted to consultant with Material submittals (MTS) and Document submittals (DCS). Hold receiving inspections activities for fabrication raw materials (Material grades sorting using Portable Spectrometer and Mechanical tests such as hardness and tension test). Inspection of Steel Structure Fabrications for Dimensional and Fit-up check. Checking painted / coated steel surfaces (coating thickness, zinc content and surface finish). Inspection of welding joints and connections as per AWS (Visual check, NDT such as Die penetration test, Ultrasonic and X-rays radiography). Perform tests and inspections to be witnessed by third parties as per customer requirement. Responsible for submitting MIR to consultant and get product release to be sent to site. Inspection of Decorative items such as Gold Plated items and Stainless steel Handrails. Responsible for calibrating devices which could be internally calibrated and holding calibration plan for which are externally calibrated. Responsible for holding ISO 9001 documents and preparing internal audit. January / 2013 – December / 2014 Job Title: Quality Control Shift Engineer Department: Quality Department Employer: Alexandria Automotive Casting Co. – Alexandria Egypt Automotive and parts manufacturing industry Job Responsibilities: Responsible for doing in process control activities to assure that manufacturing process is done according to quality specifications and control plans. Apply variable metal tests such as Microstructure check, Hardness and Tension test, porosity check by X-rays and Die penetration test, analysing material composition by Spectrometer, checking material grade using Ultrasound test…etc. Monitoring cast full dimensions by CMM machine. Perform receiving inspections for metal and sand raw materials. Follow up customer complaints and take the necessary corrective actions. Take charge of product audit activities and product sorting actions including inspecting products for casting defects as requested by customer. Develop statistics by calculating the percentage of defected products record inspection data. Develop a quality control plan based on ISO 9001 and ISO/TS 16949 Khaled Mahmoud Shehata E-mail: [email protected] Mobile: KSA +966540416199 / +966580622971 Egypt +201014281475 Objective Seeking a challenging engineering position in a leading organization where all my knowledge and skills are best utilized and developed.