Bulletin Engineering Keyless Bushings- The modern shaft connection BRECOflex now offers pulleys with matching keyless bushings with no additional delivery time. These industry-standard bushings solve many issues related to using traditional keyways. Increased Accuracy – keyway backlash is avoided, additionally keyways wallow out with cycling High Strength – keyless bushing torque capacity with smooth shafts is higher Easy Setup – keyless bushings allow for infinite timing adjustment Eliminate Keyways Keyway and Setscrews Keyed Taper Bushing Keyless Bushing
2
Embed
Keyless Bushings- The modern shaft connection · the bushing may be recessed in the pulley for a compact assembly. While shafts without keyways are stronger, keyless bushings can
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Bul
letin
Eng
inee
ring
Keyless Bushings-The modern shaft connection
BRECOflex now offers pulleys with matching keyless bushings with no additional delivery time. These industry-standard bushings solve many issues related to using traditional keyways.
Increased Accuracy – keyway backlash is avoided, additionally keyways wallow out with cycling
High Strength – keyless bushing torque capacity with smooth shafts is higher
Easy Setup – keyless bushings allow for infinite timing adjustment
Eliminate Keyways
Keyway and Setscrews Keyed Taper Bushing Keyless Bushing
Bulletin
Engineering
222 Industrial Way West • Eatontown, NJ 07724Phone (732) 460-9500 • Fax (732) [email protected] • www.brecoflex.com
Keyless Bushings - Specification
BRECOflex engineering will assist in selecting a bushing based on the pulley, shaft size, and operating parameters. Pulley bore size, tolerance and finish will be specified to suit the selected bushing.
Locking screw tightening torque is important and marked on the bushing packaging. In some marginal applications thin wall pulleys elastic expansion of the pulley may need to be controlled with a lower recommended tightening torque. Depending on the pulley–bushing combination and customer preference the bushing may be recessed in the pulley for a compact assembly.
While shafts without keyways are stronger, keyless bushings can also be used withkeyed shafts by positioning the inner ring slit opposite keyway and a locking screwover the keyway.