Kerr Kerr Pulp Canal Sealer EWT Pulp Canal Sealer EWT for Lubrication for Lubrication 1. Double check for dryness to working length with sterile absorbent point. 2. Place to terminus with absorbent point. 3. Remove with absorbent point(s) until slightly “splotchy” (Splotchy Paper Point Test). 4. Now ready to inject pre-warmed pre-warmed GP GP.
Kerr Pulp Canal Sealer EWT for Lubrication
Jan 01, 2016
Kerr Pulp Canal Sealer EWT for Lubrication. Double check for dryness to working length with sterile absorbent point. 2. Place to terminus with absorbent point. 3. Remove with absorbent point(s) until slightly “splotchy” (Splotchy Paper Point Test). - PowerPoint PPT Presentation
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
KerrKerr Pulp Canal Sealer EWT Pulp Canal Sealer EWTfor Lubricationfor Lubrication
1. Double check for dryness to working length with sterile absorbent point.
2. Place to terminus with absorbent point.
3. Remove with absorbent point(s) until slightly “splotchy” (Splotchy Paper Point Test).
4. Now ready to inject pre-warmedpre-warmed GPGP.
Applying Kerr Pulp Canal Sealer EWT
“Splotchy” Paper Point Test
“Splotchy” Paper Point Test
Tips on Use:
Use onlyonly larger 20 gauge needles20 gauge needles
201
Set at highest temp highest temp settingsetting Use SchwedSchwed regular flowregular flow Gutta Percha
Schwed “Regular Flow” pellets
The “SQUIRT”- Feel the pushback
Tips for packing GP:
Preset plugger so no bindingno binding
Use #9 Schilder#9 Schilder plugger, or
Blue Dovgan #60 NiTiDovgan #60 NiTi
5 second5 second “push”
Don’t “bounce” off GP
Keep wad of GPwad of GP ahead
Make sure plugger cleanplugger clean
Use enough pressureenough pressure!
The “PACK”“PACK”
Related Documents
