Kenstan LOCK COMPANY 2008 Catalog Kenstan Lock Company manufactures a full line of high-quality showcase and cabinet locks for commercial, retail and industrial use. With our commitment to total service, we can assist you with security layouts, keying plans and customized products to meet your specific security demands. Disc Tumbler Keymatic Medeco ® Core Pin Tumbler Interchangeable Core Accessories Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected]W www.kenstan.com S V ASSA ® ABLOY ®
Kenstan Lock Company manufacturers a full line of high- quality showcase and cabinet locks for commercial, retail and industrial use. With our commitment to total service, we can assist you with security layouts, keying plans and customized products to meet your specific security demands.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
2008 Catalog
Kenstan Lock Company manufactures a full line of high-quality showcase and cabinet locks for commercial, retail and industrial use.With our commitment to total service, we can assist you with security layouts, keying plans and customized products to meet your specific security demands.
Disc Tumbler
Keymatic
Medeco® Core
Pin Tumbler
Interchangeable Core
Accessories
KenstanL O C K C O M P A N Y
2008 Catalog
Kenstan
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
S VASSA® ABLOY®
LO
CK
C
OM
PA
NY
2008 C
atalog
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Terms and Conditions of Sale2008 KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
1. Pricing: Kenstan Lock reserves the right to institute price adjustments based upon fluctuation of material costs without prior notice. Orders, or balances of orders, that have not shipped within 6 months from the original order date may be subject to a price review.
2. Payment Terms: Terms on all orders, unless otherwise approved by Kenstan, are Net 30 Days from the date of the invoice. A service charge of 1.5% per month will be charged on overdue accounts.
3. Shipping: Please be sure to specify your preferred shipping method on every order. For all orders received without shipping instructions, Kenstan will use our discretion to make carrier selection based upon the most economical method of shipment available to meet your required in house date. Kenstan is not responsible for risk of loss or damage to products in transit with the selected carrier.
4. Deliveries: At Kenstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within 2 weeks from the receipt of your order. Rush order and emergency services are available. Unless specifically prohibited in writing by the purchaser, Kenstan reserves the right to make partial shipments of any order.
5. Inspection: Kenstan Lock inspects all products in accordance with our standard quality control procedures. Upon receipt and inspection by the purchaser, any parts proven to be defective or not as ordered may be returned to Kenstan for repair or replacement following the conditions in the “Returned Goods” section (#6) below.
6. Returned Goods: Product replacement or account credit for any returned goods will be made solely at the discretion of Kenstan and will only be accepted upon the issuance of a Return Authorization number from Kenstan’s Customer Service Department. Merchandise proven to be defective, due to faulty material and/or workmanship, may be returned for full replacement or credit. Kenstan Lock Co. will only warranty locks and parts that were modified by our factory. Any product ordered incorrectly by the customer may be accepted for return and subject to a 50% handling charge. Locks made with special or out-of production parts are not returnable, unless prior arrangements have been made. Returned merchandise that is damaged in transit, due to inadequate return packaging, will not be accepted.
7. Warranty: Kenstan Lock warrants, for a period of one year from delivery, that our products are free from defects in material and workmanship and makes no other warranties, expressed or implied, including but not limited to the degree of security or the purchaser’s application or use of our product. In the event of a product defect, Kenstan shall only be responsible to the extent of the cost of our product, and will not accept any claims for labor or loss of merchandise.
8. Cancellation: If all or any part of an order is cancelled before the completion of the product assembly by Kenstan, the purchaser shall be responsible for payment of all assembled items as well as any special parts ordered for items remaining unassembled at the time of cancellation. If pricing on the original order was based upon Kenstan’s quantity discount, a partial cancellation may affect the pricing on items already shipped and invoiced and a price adjustment will be made.
9. Catalog Dimensions and Sample Policy: Please be aware that all lock and part drawing dimensions carry a tolerance of plus or minus 1/16’’ and are for reference only. Please contact us for actual dimensions. Samples of all of our products are available upon request.
Since 1963, Kenstan Lock Company has manufactured several lines of high-quality showcase and cabinet locks, each with their own unique security features. Each year, we continue to enhance our existing prod-uct lines, while adding new products to meet the ever-changing needs of our commercial, industrial and retail clients. We also offer a wide range of door hardware locks, such as mortise and rim cylinders, as well as le-ver and tubular handles for fitting rooms, stock rooms, offices, etc.
Our product lines are complimented by Kenstan as-sociates who are available to assist you with security layouts, keying plans and custom products as needed.
Each of our lines, and all of our products, are manu-factured using the highest standards of quality and we stand behind each and every product we deliver. From the quality products assembled in our factory to our shipping and customer service departments, our goal is to provide the best service possible, from start to finish.
At Kenstan, we take pride in our reputation that has been built on quality products, reliability and the excep-tional customer service that our clients depend on.
Introduction
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
D Line Disc Tumbler Locks Basic cabinet and showcase locksOur standard security line of flat key Disc Tumbler locks is available in various lock types, includ-ing Cam, Plunger, Dead Bolt, Spring Bolt, Z Bolt and Ratchet locks. Each lock can be keyedalike, keyed different and master keyed.
K Line Keymatic Locks A revolutionary security system with 8 locks in 1These tubular key pin tumbler locks contain 8 key combinations in each lock and thousands ofkey codes. Every Keymatic lock permits you to reset the lock to one of the eight key combina-tions using our Red Change Tool. Our K Line offers the same diverse lock types as our D Line.
I Line I.C. Core Locks A complete line of Interchangeable Core locks These 6 and 7 pin I.C. locks feature the traditional figure 8 Interchangeable Core equivalent to BestAccess lock housings and cores – but with some additional features. Our I Line includes a full lineof Cam, Dead Bolt, Spring Bolt, Plunger and Ratchet locks, as well as door hardware locks suchas Rim and Mortise Cylinders, Lever and tubular handles and other specialized locking devices. AllI Line locks can be keyed alike, keyed different, master keyed and grand master keyed.
P Line Pin Tumbler Locks Pin Tumblers for longer life and greater securityThis is our line of Flat Key Pin tumbler locks available in National, Corbin and Schlage keyways. Aswith other Kenstan lock lines, our P Line comes in a wide variety of lock types such as Cam, DeadBolt, Spring Bolt and Plunger locks. The P line can be keyed alike, keyed different, master keyedand grand master keyed.
M Line Kenstan Locks featuring Medeco® Cores High security with restricted keys Our M line High Security, Biaxial Pin Tumbler showcase and cabinet locks provides an extremelylong service life. Our M Line locks use genuine Medeco® cores manufactured to Kenstan specifi-cations. Many of the locks within our M line are also available with a Key Removable Core (our RSeries). All locks within our M line come with either Restricted Biaxial or Medeco3® RestrictedBiaxial keyways and can be keyed alike, keyed different, master keyed and grand master keyed.
S Line Kenstan Locks featuring ASSA® Cores High security with restricted keys Our S line showcase and cabinet locks offer direct drive pin technology and are designed to offera high level of physical security. The cylinder locking mechanism is uniquely designed to offersmooth operation and long life. All S Line locks can be keyed alike, keyed different and masterkeyed.
V Line Kenstan Locks featuring ABLOY® Cores High security with restricted keys Our V line showcase and cabinet locks offer rotating disc technology and are designed to offer ahigh level of physical security. The disc-style locking mechanism is designed without springs,assuring long life and smooth operation. All V Line locks can be keyed alike, keyed different, mas-ter keyed, grand master keyed and great grand master keyed.
Kenstan Line of Locks
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
Disc Tumbler Line of Locks
Disc Tum
bler
KenstanL O C K C O M P A N Y
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Z Bolt Lock
Ratchet Lock
Keys
D3
D2
D4
D5
D10
D9
D8
D7
D12
D13
D14
D1
D11
D6
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
2008
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
Introduction
Disc Tumbler Line D12008
Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SN Satin Nickel
Disc Tumbler Line of Locks
Kenstan is upgrading our complete Disc Tumbler D line of locks.Beginning in 2007, our D line will be utilizing our Higher Security BControlled Keyway as the standard keyway. Our B keyway differs fromstandard industry restricted offerings since it has been specificallydesigned to offer key control at economy pricing. All new orders with-out existing assigned key specifications will be assembled with ourControlled B keyway.
The original D Line “54G” keyway locks and keys will still be available forpurchase to match existing key systems.
Our large component inventory and assemble-to-order factory enablesyou to order door locks, drawer locks and sliding door lock types keyedalike, keyed individually or in groups, and master keyed using hundredsof key combinations. Kenstan maintains a historical database of keyingrecords, giving you the ability to match key numbers to support thesecurity needs of a specific end user.
NNoottee: When placing your lock order, please be aware that keys for boththe “B” and “5544GG” keyways will no longer be included with your lockpurchase. All keys are now sold separately. Please refer to our DiscTumbler Key section for details.
DeliveryAt Kenstan, we assemble every lock to order and strive to meet yourrequested in-house date. Our standard lead time is to ship within 2weeks from the receipt of your order. Rush order and emergency ser-vices are available.
PlatingThe D line standard plating finish is Polished Nickel.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, including SatinNickel, Polished Brass, Satin Brass, Statuary Bronze, Matte Black andCustom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special finishes – callfor pricing.
Key ControlKenstan can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain a his-torical database of key numbers.
Key Retaining vs. Non-Key Retaining Lock FunctionThe D line standard operation is a non-key retaining function (non-captive), which means that the operating key can be removed inboth the locked and unlocked position.
For higher security we recommend the key retaining (captive) function,which ensures that the key can only be removed in the locked positionand cannot be accidentally left in the open/unlocked position.
Designer Note: For ttrruuee captive operation, the use of our captive keylocks must be coordinated with sliding door showcase design. The useof nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrict door move-ment and ensure key removal only when the doors are in the sseeccuurreeposition.
PN Polished Nickel
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
1 Kenstan Disc Tumbler 2008 1/7/08 5:18 PM Page 1
NO
TE
: Keys ar e no
t included
with this lo
ck.S
ee pag
e D14 to
or d
er keys.P
rices vary accord
ing
to q
uan
tity ord
ered.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CBA D
KEY B O A
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
Disc Tumbler B Controlled Keys
Beginning in 2007, our Disc Tumbler B Controlled Keyway willbe our standard product offering. The B Controlled Keywayseverely limits unauthorized key duplication since key blanks arenever sold. Cut keys can only be ordered through the Kenstanfactory. All new lock orders without keying specifications orspecified key numbers will be assembled with the controlled Bkeyway components and keys. B keyway keys are alwaysordered separately from the locks.
B Controlled Keys are differentiated from “54G” keys through theuse of Over Molded Covers. B operating keys have a Blue OverMolded Cover and B Master Keys have a Red Over MoldedCover. A B is also marked on the plug face of the controlledkeyway while “54G” plug faces do not have a letter designation.
Disc Tumbler “54G” Keys.
In an effort to minimize key proliferation, Kenstan will no longerbe including keys for the “54G” keyway with your lock purchase.All keys must be ordered separately.
Kenstan recommends the purchase of our factory original keysto ensure smooth lock operation. Use of non-Kenstan copykeys will void the Kenstan Warranty on our locks.
ItemKEY Key
Core Type PriceD Disc Tumbler $0.50B Controlled Keyway 0.50
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Z Bolt Lock
Ratchet Lock
Keys
K3
K2
K4
K5
K10
K9
K8
K7
K12
K13
K14
K1
K11
K6
2008
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
Introduction
2008Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SN Satin Nickel
Keymatic Line of Locks
Our K line offers excellent security in a variety of lock types that canbe keyed to thousands of different key codes. Each key code haseight individual operating keys 1 through 8, used one at a time tooperate the lock. Our Red Change Tool can reset the lock to allowa new operating key (within the assigned code) to open the lock anytime a key is lost or stolen – truly eight locks in one.
Locks can be keyed alike, individually or in groups
DeliveryAt Kenstan, we assemble every lock to order and strive to meetyour requested in-house date. Our standard lead time is to shipwithin 2 weeks from the receipt of your order. Rush order andemergency services are available.
PlatingThe K line standard plating finish is Polished Nickel.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, includingSatin Nickel, Polished Brass, Matte Black, Statuary Bronze, SatinBrass and Custom Finishes to match your showcase hardware.
Please note: Plating lot charges may apply to the special finishes –call for pricing.
Key ControlKeymatic locks and keys are built to a high level of precision, makingkey duplication very difficult. Please note: We recomend our factoryoriginal key for smooth lock operation. Use of non-Kenstan copy willvoid the Kenstan warranty on our locks.
We can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain ahistorical database of key numbers.
All operating keys are stamped with a two-digit, alpha numeric datecode, a four-digit, numeric Keymatic code and a one-digit, numericsetting code (from 1 to 8) with a matching color coded key cover.The Red Change Tool is stamped with the same code as the oper-ating key, except without the setting code.
Key Retaining vs. Non-Key Retaining Lock FunctionThe K line standard operation is a key retaining function (captive),which means that the operating key can be removed in the lockedposition only; therefore, the lock cannot be accidentally left in theopen/unlocked position.
K locks can also be supplied as non-key retaining (non-captive),which allows the key to be removed in both the locked and unlockedposition.
Designer Note: For ttrruuee captive operation, the use of our captivekey locks must be coordinated with sliding door showcase design.The use of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrictdoor movement and ensure key removal only when the doors are inthe sseeccuurree position.
PN Polished Nickel
Keymatic Line K1
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
F GCBA D E
CL K 05 1203 PN Y 106
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Note: Keys are not included with this lock. See page K14 to order keys.
STANDARD BAR B1
K13
K14
KEY Keys 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keymatic Line
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
K13
Keymatic Tubular Keys
Keymatic locks utilize industry standard K137 tubular keys com-bined with non-industry standard size cuts. Standard tubularkeys are cut on a machine using a .156 diameter size cuttingblade; Kenstan uses a CNC milling machine and .093 size cutterto meet our tight tolerances and avoid cutting the key tip anddegrading the key. A typical lock shop may be capable of pro-ducing a workable duplicate key, but the Kenstan warranty willbe void if our Factory Original keys are not used with our locks.Use of unauthorized duplicates will inevitably cause the lock tobecome misaligned and possibly suffer irreversible damage.
Kenstan Original Keymatic operating keys and Change Tools can be ordered by referencing the stamp number on the keys.The first two letters represent a manufacturing date code andthe next 3 or 4 numbers represent the Keymatic key code. The final dash and number from 1 to 8 represent the settingwithin the key code for operating keys only. All operating keysstarting in late 2003 come standard with a colored key coverrepresenting dash numbers 1 thru 8. The Change Tool does nothave the final dash and number; the large red stop sign shapedcover notes the special purpose of changing the Keymatic locksetting only.
If keys have been lost or stolen, you can reference the Keymaticcode number stamped on the lock housings, cams or bolts.
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
ItemKEY Key
Core TypeK Keymatic
Operating Key/Change Tool Price01 Orange $3.6502 Blue 3.6503 Yellow 3.6504 Green 3.6505 White 3.6506 Pink 3.6507 Purple 3.6508 Tan 3.65TOOL Red Change Tool 6.65
Key CodeXXXX Specific
Up to 4 digits
A AnyKenstan assigns
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Biaxial Pin Line of Locks featuring Medeco® Core
Med
eco® C
ore
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Ratchet Lock
Core Lock
Keys
M3
M2
M4
M5
M10
M9
M8
M7
M12
M13
M14
M1
M6
M11
2008
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
Biaxial Pin Line of Locks featuring Medeco® Core
The M line offers superior security in a variety of showcase and cabinetlocks with thousands of high-security precision cut key combinations.Some M line locks are also available in a Removable Core version.
Locks can be keyed alike, individually or in groups and can be masteror grand master keyed. The unique double-locking mechanism rendersour cylinders virtually pick-proof.
DeliveryAt Kenstan, we assemble every lock to order and strive to meet yourrequested in-house date. Our standard lead time is to ship within 2weeks from the receipt of your order. Rush order and emergency ser-vices are available.
PlatingThe M line standard plating finish is Polished Nickel housing with aSatin Chrome core.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, including Polished Brass, Satin Brass, Statuary Bronze, Matte Black andCustom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special finishes – callfor pricing.
Key Control and Resistance to Attack The security of any locking system depends on two critical factors:physical strength against picking/drilling/forcing and controlling duplication of existing keys. The M line has countered these by the fol-lowing:
• Hardened steel inserts were added to protect the keyway, shear lineand sidebar areas.
• Biaxial locks employ offset chisel-pointed pins to make picking virtually impossible.
• M line keys must be cut on special key cutting machines that repro-duce the angled cuts to match the Biaxial chisel point pins.
• Every M line key blank is accounted for and its release controlled bythe factory and marked for end-user identification.
• We will process extra key orders only with an authorized signature.
Key Retaining vs. Non-Key Retaining Lock FunctionThe M line standard operation is a key retaining function (captive),which means that the operating key can be removed in the lockedposition only; therefore, the lock cannot be accidentally left in theopen/unlocked position.
M locks can also be supplied as non-key retaining (non-captive), whichallows the key to be removed in both the locked and unlocked posi-tion.
Designer Note: For ttrruuee captive operation, the use of our captive keylocks must be coordinated with sliding door showcase design. Theuse of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrict doormovement and ensure key removal only when the doors are in thesseeccuurree position.
PN Polished Nickel
Introduction
M12008
Price List and Data Sheet
Biaxial Pin LineMedeco® Core
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e M14 to
ord
er keys.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75
M14
KEY Keys 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Biaxial Pin LineMedeco Core
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
M11
Biaxial Pin LineMedeco® Core
Medeco® Keys
Our Medeco® High Security cabinet lock keys are made from aspecial nickel silver alloy. Bitted Medeco® keys must be preciselycut to exact depths and angles, and require special duplicatingmachines. The key blanks are considered restricted, factory controlled and never sold as uncut blanks. Duplicate keys cannot be made without the written signature consent and driverslicense identification of the Authorized Purchasing Personnel.The patented key programs prevent the unauthorized duplicationof keys and maintain system integrity.
Beginning in 2005, the new Medeco3® technology will also beavailable in the Medeco® cores featured in Kenstan locks. Thisunique design provides triple locking action, making the locksvirtually pick-proof. All Medeco3® keys and locks are protectedunder patent, trademark and copyright laws. As with ourStandard Medeco® Biaxial keys, the Medeco3® keys may only be duplicated by our factory.
Additional Medeco® restricted keys can only be ordered underthe original signature authorized users who initiated the keyingplan. Kenstan Original Keys can be ordered by referencing thestamp number on the key. Operating keys may be stamped with the key number itself (AA23, AC75 and so on) or may be a stamp number representing a key number (such as a 2 stamprepresenting AC75). Master keys will have an M or Masterengraved on the key bow. Core Removal keys in our RemovableCore (R) version will be engraved with C or Control on the keybow.
If keys have been lost or stolen, we can reference the stampnumber on the lock housings, cams or bolts if available.
A
B
C
D
CBA D
KEY M O XXXX
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Biaxial m3 Key Photo shown
ItemKEY Key
Core TypeM Biaxial Medeco®
H Biaxial Medeco® m3
R Removable Core G Removable Core
Medeco® m3
Key Function PriceO Operating $4.75M Master 4.75G Grand Master 4.75C Control 4.75
For Removable Core
Key CodeXXXX Specific
Up to 4 digits
A AnyKenstan assigns
V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
ASSA® Line of Locks
S
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Keys
S3
S2
S4
S5
S7
S8
S9
S1
S6
SA
SS
A®
2008
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
Introduction
ASSA® Desmo Line S12008
Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SS
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SC Satin Chrome
ASSA® Desmo Line of Locks
The S line offers high security in a variety of showcase and cabinetlocks with thousands of high-security precision cut key combina-tions.
Locks can be keyed alike, individually or in groups and can be mas-ter keyed.
DeliveryAt Kenstan, we assemble every lock to order and strive to meetyour requested in-house date. Our standard lead time is to shipwithin 2 weeks from the receipt of your order. Rush order andemergency services are available.
PlatingThe S line standard plating finish is Polished Chrome.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, including Satin Chrome, Polished Brass, Satin Brass, Statuary Bronze, MatteBlack and Custom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special finishes –call for pricing.
Resistance to Attack and Key ControlOur S line showcase and cabinet locks offer direct drive pin technol-ogy and are designed to offer a high level of physical security. Thecylinder locking mechanism is uniquely designed to offer smoothoperation and long life. It is nearly impossible to pick these locksusing standard techniques. We can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain ahistorical database of key numbers. For security reasons, duplica-tion of S keys for locks purchased originally from Kenstan can onlybe obtained through Kenstan with an authorized signature. Keyblanks are never sold.
Key Retaining Lock FunctionThe S line standard operation is a key retaining function (captive),which means that the operating key can be removed in the lockedposition only; therefore, the lock cannot be accidentally left in theopen/unlocked position.
Non-Key Retaining Lock FunctionSome S Cam locks can also be supplied as non-key retaining (non-captive), which allows the key to be removed in both the locked andunlocked position.
Designer Note: For ttrruuee captive operation, the use of our captivekey locks must be coordinated with sliding door showcase design.The use of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrictdoor movement and ensure key removal only when the doors are inthe sseeccuurree position.
PC Polished Chrome
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e S9 to
ord
er keys.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
SSD12
CBA D
KEY S O A
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
ASSA® Desmo KeysOur ASSA® Desmo High Security cabinet lock keys are madefrom nickel-silver for long life, no deep cut to weaken the key.ASSA® Desmo keys must be precisely cut to exact depths andangles, and require special duplicating machines. The key blanksare considered restricted, factory controlled and never sold asuncut blanks.
Duplicate keys can not be made without the written signatureconsent and drivers license identification of the AuthorizedPurchasing Personnel. The patented key programs prevent theunauthorized duplication of keys and maintain system integrity.
Additional ASSA® Desmo restricted keys can only be orderedunder the original signature authorized users who initiated thekeying plan.
Original Keys can be ordered by referencing the stamp numberon the key.
If keys have been lost or stolen, we can reference the stampnumber on the lock housings, cams or bolts if available.
S
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
ABLOY® Line of Locks
V
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Keys
V3
V2
V4
V5
V7
V8
V9
V1
V6
VA
BLO
Y®
2008
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
Introduction
ABLOY® EXEC Line V12008
Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
VV
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SC Satin Chrome
ABLOY® EXEC Line of Locks
The V line offers high security in a variety of showcase and cabinetlocks with thousands of high-security precision cut key combina-tions.
Locks can be keyed alike, individually or in groups and can be mas-ter, grand master or great grand master keyed.
DeliveryAt Kenstan, we assemble every lock to order and strive to meet yourrequested in-house date. Our standard lead time is to ship within 2weeks from the receipt of your order. Rush order and emergencyservices are available.
PlatingThe V line standard plating finish is Polished Chrome.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, including Satin Chrome, Polished Brass, Satin Brass, Statuary Bronze, MatteBlack and Custom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special finishes –call for pricing.
Resistance to Attack and Key ControlOur V line showcase and cabinet locks offer rotating disc technologyand are designed to offer a high level of physical security. The disc-style locking mechanism is designed without springs, assuring longlife and smooth operation. It is nearly impossible to pick these locksusing standard techniques.We can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain ahistorical database of key numbers. For security reasons, duplicationof V keys for locks purchased originally from Kenstan can only beobtained through Kenstan with an authorized signature. Key blanksare never sold.
Key Retaining Lock FunctionThe V line standard operation is a key retaining function (captive),which means that the operating key can be removed in the lockedposition only; therefore, the lock cannot be accidentally left in theopen/unlocked position.
Please Note: Our V line of locks have a 90 degrees “lost motion”operation. The key is inserted and turned 90 degrees (key verifica-tion process) before the lock can begin to open.
Designer Note: For ttrruuee captive operation, the use of our captivekey locks must be coordinated with sliding door showcase design.The use of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrictdoor movement and ensure key removal only when the doors are inthe sseeccuurree position.
PC Polished Chrome
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
VV
5 Kenstan ABLOY 2008 1/7/08 5:25 PM Page 1
NO
TE
: Keys are no
t included
with this lo
ck.S
ee pag
e V12 to
ord
er keys.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Master KeyedN No Std.Y Yes 2.15G Grand Master 3.75GA Great Grand Master 4.75
ab
b
c
d COVER PLATE
SCREW
GASKET
DOUGHNUT RING
GLASS
GASKET
a DOUGHNUT RING 1
b GASKET 2
c SCREW 3
d COVER PLATE 1
PARTS INCLUDED QTY.
5 Kenstan ABLOY 2008 1/7/08 5:26 PM Page 8
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keys KEY
ABLOY® EXEC Line V9
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
D12
CBA D
KEY V O A
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
ABLOY® EXEC KeysOur ABLOY® EXEC High Security cabinet lock keys are madefrom nickel-silver and have a heavyduty polymer key bow.ABLOY® EXEC keys must be precisely cut to exact depths andangles, and require special duplicating machines. The key blanksare considered restricted, factory controlled and never sold asuncut blanks. Duplicate keys can not be made without the written signature consent and drivers license identification of theAuthorized Purchasing Personnel. The patented key programsprevent the unauthorized duplication of keys and maintain system integrity.
Additional ABLOY® EXEC restricted keys can only be orderedunder the original signature authorized users who initiated thekeying plan.
Kenstan Original Keys can be ordered by referencing the stampnumber on the key.
If keys have been lost or stolen, we can reference the stampnumber on the lock housings, cams or bolts if available.
VV
ItemKEY Key
Core Type V ABLOY® EXEC
Key Function PriceO Operating $5.35M Master 5.35G Grand Master 5.35GA Great Grand Master 5.35
Key CodeXXXXX Specific
Up to 5 digits
A AnyKenstan assigns
VV
5 Kenstan ABLOY 2008 1/7/08 5:26 PM Page 9
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core Line of Locks
I.C. C
ore
KenstanL O C K C O M P A N Y
Introduction
Cam Lock
Drawer/Door Lock
Gang Lock
Snap Bolt Lock
Plunger Locks
Ratchet Lock
Cores
Keys
I2
I3
I4
I5
I9
I10
I1
I7
I6
I8
I11
I12
2008
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
Interchangeable Core
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
BL Matte Black
SB Satin Brass
PB Polished Brass
PC Polished Chrome
Interchangeable Core Line of Locks
Our I line offers excellent security in a variety of showcase locks anddoor hardware applications by using thousands of 6 and 7 Pin Tumblerkey combinations.
Cores can be keyed alike, individually or in groups and can be masterkeyed in up to four levels for greater flexibility. Kenstan housings and cores are equivalent to Best Access locks and are therefore inter-changeable among both company products.
DeliveryAt Kenstan, we maintain a large stock of housings and cores to meetyour in-house date.
Plating
The I line standard plating finish for housings and cores is BrushedChrome.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, includingPolished Chrome, Polished Brass, Matte Black, Statuary Bronze, SatinBrass and Custom Finishes to match your showcase hardware.
PPlleeaassee nnoottee: Plating lot charges may apply to the special plating finishes – call for pricing.
HandingHanding means the orientation of the key relative to the bolt move-ment. We can almost always orient the lock so the key is inserted verti-cally.
• Right Handing means the door hinges on the right side and locks on the left.
• Left Handing means the door hinges on the left side and locks on the right.
• Vertical Handing means the drawer is locked at the top.• Inverted Handing means the drawer is locked at the bottom.
Key ControlKenstan can register your keys and maintain your key plans by store,retail department, showcase/cabinets, or office and we maintain a histori-cal database of key numbers. Keys should be secured when not in use.
Key Retaining vs. Non-Key Retaining Lock FunctionThe I line standard operation is a non-key retaining function (non-captive). The operating key can be removed in both the lockedand unlocked position.
For higher security, we recommend the key retaining (captive) function,which ensures that the key can be removed only in the locked positionand prevents the lock from being accidentally left in the open orunlocked position.
Designer Note: For ttrruuee captive operation, the use of our captive keylocks must be coordinated with sliding door showcase design. Theuse of nnoonn bbyy--ppaassssiinngg sliding doors is recommended to restrict doormovement and ensure key removal only when the doors are in thesseeccuurree position.
BC Brushed Chrome
Introduction
I12008
Price List and Data Sheet
Interchangeable Core
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead-time and plating lot charges may apply toSpecial and Custom finishes. Please call Kenstan for details.
1-7/8"
1-5/32"1-3/8"
1/8"1-7/8"
7/8"FLATS
VERTICAL FLATS
1-1/8"
1-3/16"
1-7/16"
1-3/4"
1-7/8"
OFFSET CAM1 included
5/16"
1/8"
CBA D E F
CL I 05 1203 BC Y
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
E
F
*Cores are not included with this lock. See page I11 to order cores.
Key RetainingKey retaining option is not available on Standard Core model. (Lock should be ordered as Key Retaining.)
N No 0.00Y Yes 0.00
Keyed DifferentN No 0.00Y Yes 0.45
Stamp CoreN No 0.00Y Yes 0.45
Master KeyedN No 0.00Y Yes 0.75G Grand Master 1.25GA Great Grand Master 2.75GB Great Great 4.75
Grand Master
ExtendedN No Std.1 1/2" Extension 3.252 1" Extension 3.95
*Restricted codes are available upon request. (Signature Req.)
(Patented)
8 keyway core (Patented)
I12
KEY Keys 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Interchangeable Core
A
B
C
D
E
CBA D E
KEY I O F XXXX
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
Interchangeable Core Keys
Our Kenstan Interchangeable Core Key product ties into all ofthe existing Best Access alphabetical keyways.
Kenstan unrestricted I keys can be ordered by referencing thestamp number on the key. Keys duplicated by a locksmith willusually not carry over the stamp number – we may need the keysent to us to process your order for keys. Master keys will haveMaster stamped on the key bow; grand master keys will have G Master stamped on the key bow; great grand master keys willhave GG Master stamped on the key bow and great great grandmaster Keys will have GGG Master stamped on the key bow.Core Removal keys will have Control stamped on the key bow.
If keys have been lost or stolen, we can reference the stampnumber on the face or the side of the core (if available) or wecan decode a core that is sent to our factory.
ItemKEY Key
Core TypeI I.C. Core
Key Function PriceO Operating $3.75M Master 3.75G Grand Master 3.75GA Great Grand Master 3.75GB Great Great 3.75
Grand MasterC Control 3.75
To Remove Core
Keyway8* SecureABCDEFGHJKLMQ
Key CodeXXXX Specific
Up to 4 digits
A AnyKenstan assigns
*Signature required for restricted codes.
(Patented)
8 Keyway Key.
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Pin Tum
bler
Pin Tumbler Line of Locks
KenstanL O C K C O M P A N Y
Introduction
Cam Lock
Drawer/Door Lock
Plunger Lock
Keys
P2
P3
P4
P1
P5
2008
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
SB Satin Brass
PB Polished Brass
Introduction
2008Price List and Data Sheet
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
Pin Tumbler Line of Locks
For excellent security, our P line offers a variety of lock types thatcan be keyed alike, individually or in groups. They can also be mas-ter keyed or grand master keyed using thousands of 4 and 5 PinTumbler key combinations in National D4291 and CCL R1 keyways.
DeliveryAt Kenstan, we assemble every lock to order and strive to meetyour requested in-house date. Our standard lead time is to shipwithin 2 weeks from the receipt of your order. Rush order andemergency services are available.
PlatingThe P line standard plating finish is Satin Chrome.
A wide range of ssppeecciiaall ppllaattiinngg ffiinniisshheess is also available, includingPolished Brass, Satin Brass, Matte Black, Polished Chrome,Statuary Bronze and Custom Finishes to match your showcasehardware.
Please note: Plating lot charges may apply to the special finishes –call for pricing.
Handing Handing means the orientation of the key relative to the bolt move-ment. We can always orient the lock so the key is inserted vertically.
• Right Handing means the door hinges on the right side and lockson the left.
• Left Handing means the door hinges on the left side and lockson the right.
• Vertical Handing means the drawer is locked at the top.• Inverted Handing means the drawer is locked at the bottom.
Key ControlKenstan can register your keys and maintain your key plans bystore, retail department, showcase/cabinets, or office and we main-tain a historical database of key numbers. Keys should be securedwhen not in use.
Key Retaining vs. Non-Key Retaining Lock FunctionThe P line standard operation is a non-key retaining function (non-captive). In this operational condition, the operating key can beremoved in the unlocked position.
For higher security we recommend the key retaining (captive) func-tion, which forces the key to be removed in the locked position only.The lock cannot be accidentally left in the open/unlocked position.
SC Satin Chrome
Pin Tumbler Line P1
Standard Plating Finish
Custom Plating Finish *
Special Plating Finishes *
**Extended lead time and plating lot charges may apply to thespecial and Custom finishes. Please call Kenstan for details.
7 Kenstan Pin Tumbler 2008 1/7/08 5:36 PM Page 1
7/8"1/2"
5/8"
7/8" 1-1/4"
1/8"
1-1/4"
CBA D E F G H I
CL PN 04 0312 SC N Y Y N
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
T wo
keys are included
with this lo
ck.S
ee pag
e P5 to
ord
er add
itional keys.
G
I
H
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
A
B
C
D
E
F
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
Lock StyleCL Cam Lock
Core Type PricePN National Keyway $ 0.00PC Corbin Keyway 7.07
Master KeyedN No Std.Y Yes 1.75G Grand Master 2.10
3/16" TYP.
3/8"
1-1/8"
1"2"
ROUND SERIES
All dimensions shown are in the locked position.
1/8"
7/16"
1-1/2"
1"
1/2"
7/16"9/16"
LOCK PARTS
PLUNGER CUP1 included
STRIKE LOCATOR1 included
PLUNGER EXTENSION1 included
#6 x .75" LG. MOUNTING SCREW2 included
3/16"
7 Kenstan Pin Tumbler 2008 1/7/08 5:36 PM Page 4
2005Price List and Data Sheet
2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Keys KEY
Pin Tumbler Line P5
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Pin Tumbler Keys
Our Pin Tumbler locks utilize either the National NA12 (D4291) or the Corbin R1 keyways. These flat brass 4 and 5 pin keys arewidely available through locksmith distribution for key duplication.
Kenstan Pin Tumbler Keys can be ordered by referencing thestamp number on the key. Keys may be stamped with the keynumber itself (915 or 4T2) or a stamp number representing a key number (such as a 2 stamp representing a 915 or 4T2).Keys duplicated by a locksmith will usually not carry over thestamp number – we may need a photocopy of the key faxed ora key sent to us to process your order for keys. Master keys willhave Master stamped on the key bow; grand master keys willhave GMK stamped on the key bow.
If keys have been lost or stolen, we can reference the stampnumber on the face of the lock (if available) or we can decode alock that is sent to our factory.
CBA D
KEY PN O XXXX
Item NumberTo determine your item number enter the RED optioncode for each section as in the example below.
A
B
C
D
ItemKEY Key
Core TypePN National KeywayPC Corbin Keyway
Key Function PriceO Operating $ 2.00M Master 2.00G Grand Master 2.00
Key CodeXXXX Specific
Up to 4 digits
A AnyKenstan assigns
7 Kenstan Pin Tumbler 2008 1/7/08 5:36 PM Page 5
S V
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y
Accessories
Accessories
Face Sleeves, Collars and Spacers
Spacers and Washers
Strikes
Strikes and Mounting Plates
Mounting Plates, Spacers and Cams
Gang Lock Hardware
Miscellaneous
Packages and Cams
A2
A3
A4
A1
A5
A6
A7
A8
2008
hb
Note
Click on the letter (D, K, M, S, V, I, P or A) to go to the desired Product Line and then Page number (D1, D2,D3...)to go the desired page.
2008Price List and Data Sheet
3/4"
3/32"
1-1/16"
3/4"
1/16"
1-1/4"
5/8"
1/8"
1-1/8"
7/8"
1/4"
1-1/8"
5/8"
5/8"
3/32"
1-3/8"
7/8"
1-5/8"
1-1/2"
1-5/32"
2"
1/2"
1/8"
1-1/2"
1-3/8"
1-5/32"
1-3/4"
1-5/32"
3/16"
1-3/8"
Face Sleeves/Collars/Spacers
Accessories A1
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
For use with P Drawer/Door Locks.
SPACER
A decorative mounting for use with I Cam Locks.
PROTECTIVE COLLAR
For use with I Cam Locks.
COLLAR/SPACER
Used to prevent metal track from bending when mounting locks.
5/16” SPACER
For use with I25 Drawer/Door Locks.
SPACER
For use with D, K, M, S, V and P Cam Locks.
FINGER PULL
A decorative mounting for use with D, K, M, S and V Cam Locks. The Face Sleeve can also be used to position the Cam.
FACE SLEEVE
A decorative mounting for use with D, K, M, S and V Cam Locks. The Face Sleeve can also be used to position the Cam.
FACE SLEEVE
For use with D, K, M, S and V Cam Locks.
FACE SLEEVE WASHER
For use with D, K, M, S and V Drawer/Door Locks.
TRIM RING
*Plating Finish: PN Polished Nickel; PB Polished Brass; SB Satin Brass; BL Matte Black; ST Statuary Bronze; BC Brushed Chrome; AL Aluminum; WH White; CF Custom Finish
1/8"
PlatingItem Number Finish* Price
A U CL FSL XXX 108 PN $0.51PB 0.51BL 0.71ST 0.71CF Call
PlatingItem Number Finish* Price
A P DL SPA PLA 010 WH $1.10
PlatingItem Number Length Finish* Price
A I CL COL SPA 009 3/32" AL $2.79016 5/32" 2.79019 3/16" 2.79025 1/4" 2.79050 1/2" 2.79
PlatingItem Number Finish* Price
A I CL COL BVL 173 BC $9.25PB 9.25CF Call
PlatingItem Number Finish* Price
A U CL PUL FGR XXX PN $0.75CF Call
PlatingItem Number Finish* Price
A U CL FSL XXX 124 PN $0.60PB 0.76BL 0.76ST 0.76CF Call
PlatingItem Number Finish* Price
A U CL FSL WSH 116 PN $0.51CF Call
PlatingItem Number Finish* Price
A U DL TRM RNG 110 PN $0.71SB 0.71ST 0.71CF Call
PlatingItem Number Finish* Price
A I 25 SPA PLA 013 WH $1.30
PlatingItem Number Finish* Price
A U XX SPA XXX 31 PC $0.68
1/4"
5/32"
5/16"
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 1
PlatingItem Number Finish* Price
A U DL SPA XXX XXX PN $0.32ST 0.32CF Call
PlatingItem Number Finish* Price
A U CL WSH LKW 075 ZN $0.36
PlatingItem Number Finish* Price
A U CL WSH PLA 113 WH $0.23
PlatingItem Number Finish* Price
A U CL WSH RBR 113 BL $0.20
PlatingItem Number Finish* Price
A U CL WSH FLT 103 PN $0.25PB 0.25ST 0.25CF Call
PlatingItem Number Finish* Price
A U 40 SPA XXX 200 PN $0.49CF Call
PlatingItem Number Finish* Price
A U CL WSH ANR 4PR ZN $0.22CF Call
PlatingItem Number Finish* Price
A U CL CVR CAM RBR BL $0.35
For use with Cams.
RUBBER CAM COVER
For use with D, K, M, S, V and P Cam Locks.
4 PRONG ANTI-ROTATION WASHER
For use with D, K, M, S, V and P Cam Locks.
2 PRONG ANTI-ROTATION WASHER
For use with D, K, M, S, V and P Cam Locks.
WONDER WASHER
FLAT METAL WASHER
For use with D, K, M, S, V and P Cam Locks.
3/4" INTERNAL LOCK WASHER
For use with D, K, M, S and V40 Plunger Locks.
1-1/2"
.050
2"
SPACER
For use with D, K, M, S and V Drawer/Door and Gang Locks.
Use to secure the second door when using double doors.
8 Kenstan Accessories 2008 1/7/08 5:37 PM Page 7
Gang Lock PackageTo determine your item number enter the RED option code foreach section as in the example below.
A
B
C
CBA
GANG 3 C
GANG 3C A kit with three adjustable stops,three 1-1/8" pins, three lock washers, andfour closed bar guides.
A8
Packages/Cams 2008Price List and Data Sheet
KenstanL O C K C O M P A N Y
Accessories
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
PIN
LOCK WASHER
ADJUSTABLE STOP
CLOSED BAR GUIDE
If a particular accessory is not shown in our catalog, pleasecontact Kenstan for assistance. Kenstan may have the partas a non-catalog item or we will modify an existing part tomeet your specific application. We offer prompt service in thedevelopment and quoting of custom accessory parts.
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Terms and Conditions of Sale2008 KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Suite 100, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
1. Pricing: Kenstan Lock reserves the right to institute price adjustments based upon fluctuation of material costs without prior notice. Orders, or balances of orders, that have not shipped within 6 months from the original order date may be subject to a price review.
2. Payment Terms: Terms on all orders, unless otherwise approved by Kenstan, are Net 30 Days from the date of the invoice. A service charge of 1.5% per month will be charged on overdue accounts.
3. Shipping: Please be sure to specify your preferred shipping method on every order. For all orders received without shipping instructions, Kenstan will use our discretion to make carrier selection based upon the most economical method of shipment available to meet your required in house date. Kenstan is not responsible for risk of loss or damage to products in transit with the selected carrier.
4. Deliveries: At Kenstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within 2 weeks from the receipt of your order. Rush order and emergency services are available. Unless specifically prohibited in writing by the purchaser, Kenstan reserves the right to make partial shipments of any order.
5. Inspection: Kenstan Lock inspects all products in accordance with our standard quality control procedures. Upon receipt and inspection by the purchaser, any parts proven to be defective or not as ordered may be returned to Kenstan for repair or replacement following the conditions in the “Returned Goods” section (#6) below.
6. Returned Goods: Product replacement or account credit for any returned goods will be made solely at the discretion of Kenstan and will only be accepted upon the issuance of a Return Authorization number from Kenstan’s Customer Service Department. Merchandise proven to be defective, due to faulty material and/or workmanship, may be returned for full replacement or credit. Kenstan Lock Co. will only warranty locks and parts that were modified by our factory. Any product ordered incorrectly by the customer may be accepted for return and subject to a 50% handling charge. Locks made with special or out-of production parts are not returnable, unless prior arrangements have been made. Returned merchandise that is damaged in transit, due to inadequate return packaging, will not be accepted.
7. Warranty: Kenstan Lock warrants, for a period of one year from delivery, that our products are free from defects in material and workmanship and makes no other warranties, expressed or implied, including but not limited to the degree of security or the purchaser’s application or use of our product. In the event of a product defect, Kenstan shall only be responsible to the extent of the cost of our product, and will not accept any claims for labor or loss of merchandise.
8. Cancellation: If all or any part of an order is cancelled before the completion of the product assembly by Kenstan, the purchaser shall be responsible for payment of all assembled items as well as any special parts ordered for items remaining unassembled at the time of cancellation. If pricing on the original order was based upon Kenstan’s quantity discount, a partial cancellation may affect the pricing on items already shipped and invoiced and a price adjustment will be made.
9. Catalog Dimensions and Sample Policy: Please be aware that all lock and part drawing dimensions carry a tolerance of plus or minus 1/16’’ and are for reference only. Please contact us for actual dimensions. Samples of all of our products are available upon request.
Since 1963, Kenstan Lock Company has manufactured several lines of high-quality showcase and cabinet locks, each with their own unique security features. Each year, we continue to enhance our existing prod-uct lines, while adding new products to meet the ever-changing needs of our commercial, industrial and retail clients. We also offer a wide range of door hardware locks, such as mortise and rim cylinders, as well as le-ver and tubular handles for fitting rooms, stock rooms, offices, etc.
Our product lines are complimented by Kenstan as-sociates who are available to assist you with security layouts, keying plans and custom products as needed.
Each of our lines, and all of our products, are manu-factured using the highest standards of quality and we stand behind each and every product we deliver. From the quality products assembled in our factory to our shipping and customer service departments, our goal is to provide the best service possible, from start to finish.
At Kenstan, we take pride in our reputation that has been built on quality products, reliability and the excep-tional customer service that our clients depend on.