CONTENTS 1. SAFETY INFORMATION ............................................2 2. EXPLODED VIEWS AND PARTS LIST .......................2 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...10 4. PCB CONNECTION DIAGRAM ................................32 5. ELECTRICAL PARTS LIST ........................................44 6. ADJUSTMENT..........................................................62 7. GENERAL INFORMATION .......................................63 7.1 DISASSEMBLY ...................................................63 7.2 IC ........................................................................65 7.3 OPERATIONAL FLOW CHART ...........................72 8. OPERATIONS AND SPECIFICATIONS.....................73 PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A. PIONEER EUROPE N.V. Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936 C PIONEER CORPORATION 2000 K-ZZB. FEB. 2000 Printed in Japan ORDER NO. CRT2458 MULTI-CD/DAB CONTROL HIGH POWER CASSETTE PLAYER WITH RDS TUNER KEH-P7900R X1N/EW Service Manual KEH-P7900R/X1N/EW - This service manual should be used together with the following manual(s): Model No. Order No. Mech. Module Remarks CX-1011 CRT2406 3L Cassette Mech. Module:Mech.Description, Disassembly, Adjustment KEH-P7910R X1N/EE KEH-P7950 X1N/ES NOTE: - Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. - This service manual does not describe the CD test mode. For the operations in the CD test mode, refer to the CD player's Service manual. MULTI-CD/DAB CONTROL HIGH POWER CASSETTE PLAYER WITH FM/AM TUNER
Pioneer KEH-P7900R KEH-P7910R KEH-P7950 Service Manual
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CONTENTS
1. SAFETY INFORMATION ............................................2
2. EXPLODED VIEWS AND PARTS LIST .......................2
8. OPERATIONS AND SPECIFICATIONS.....................73
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A.PIONEER EUROPE N.V. Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936
C PIONEER CORPORATION 2000 K-ZZB. FEB. 2000 Printed in Japan
ORDER NO.
CRT2458
MULTI-CD/DAB CONTROL HIGH POWER CASSETTE PLAYER WITH RDS TUNER
KEH-P7900R X1N/EW
ServiceManual
KEH-P7900R/X1N/EW
- This service manual should be used together with the following manual(s):Model No. Order No. Mech. Module Remarks
- Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
- This service manual does not describe the CD test mode.
For the operations in the CD test mode, refer to the CD player's Service manual.
MULTI-CD/DAB CONTROL HIGH POWER CASSETTE PLAYER WITH FM/AM TUNER
2
KEH-P7900R,P7910R,P7950
2. EXPLODED VIEWS AND PARTS LIST
2.1 PACKING
13
14
10
8
12
11
9
1
26
5
7
4
3
- KEH-P7900R/X1N/EW, KEH-P7910R/X1N/EE
1. SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repaircomplex products such as those covered by this manual.Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.If you are not qualified to perform the repair of this product properly and safely; you should not risk trying to do soand refer the repair to a qualified service technician.
101 Damper Unit CXB5070102 Holder Unit CXB5736103 Holder Unit CXB5737104 Screw IMS20P045FZK105 Chassis Unit See Contrast table(2)
106 Cassette Mechanism ModuleEXK4010107 IC(IC301) PAL005A108 Transistor(Q921) 2SD2396109 Chock Coil(L901) CTH1171110 Remote Control Assy See Contrast table(2)
111 Battery Cover See Contrast table(2)112 Cushion See Contrast table(2)113 Double Sided Tape CNM6811
Mark No. Description Part No. Mark No. Description Part No.
Part No.Mark No. Symbol and Description KEH-P7900R/X1N/EW KEH-P7910R/X1N/EE KEH-P7950/X1N/ES
6 Cord Assy CDE6284 CDE6285 CDE62318 Cap CKX-003 Not used Not used
14 Holder CNC8357 CNC5704 CNC570415 Spacer CNM4913 Not used Not used17 Panel CNS5992 CNS5992 CNS5993
19 Tuner Amp Unit CWM6957 CWM6958 CWM695937 Holder CNC7533 Not used Not used42 Insulator CNM5967 Not used Not used48 FM/AM Tuner Unit CWE1500 CWE1504 CWE150150 Detach Grille Assy CXB4971 CXB4972 CXB4973
Decimal points for resistorand capacitor fixed valuesare expressed as :2.2 2R20.022 R022
← ←
Symbol indicates a resistor.No differentiation is made between chip resistors anddiscrete resistors.
E :
Symbol indicates a capacitor.No differentiation is made between chip capacitors anddiscrete capacitors.
The > mark found on some component parts indicatesthe importance of the safety factor of the part.Therefore, when replacing, be sure to use parts ofidentical designation.
1. ACC ON while pressing the 1 and 3 keys together after RESET START.
2. Pressing the 1 and 3 keys together after SOURCE ON. (All indication lighting mode)
3. Use VR1902 to adjust the difference in potential between TP1 and TP3(GND) to 1.07V.
• All indication lighting mode cancellationSwitch ACC, back-up OFF.
62
Keyboard Unit (SIDE B)
63
KEH-P7900R,P7910R,P7950
- Removing the Tuner Amp Unit (Fig.2)
Remove the two screws.
Remove the three screws.
Remove the screw.
Unbend the two claws and then remove
the Tuner Amp Unit.
- Removing the Upper Case (not shown)
1. Remove the two screws.
2. Remove the Upper Case.
- Removing the Cassette Mechanism Module (Fig.1)
Remove the four screws and then remove the
Cassette Mechanism Module.
- Remove the Grille Assy (Fig.1)
Remove the two screws.
Disconnect the two stoppers and then remove
the Grille Assy.
Fig.1
7. GENERAL INFORMATION
7.1 DISASSEMBLY
Fig.2Tuner Amp Unit
Cassette Mechanism Module
Grille Assy
64
KEH-P7900R,P7910R,P7950
- Removing the OEL Unit
1. Apply hot air to the cable pins for the anode terminal using a
blower used for removing a flat-packaged IC or something
like that. When all the pins are peeling off from the
P.C.board, pinch the cable with a pair of tweezers and
remove it slowly from the P.C.board. (Fig.3)
* Be careful not to remove other electrical parts when you use
a blower. Especially, when hot air is appropriated to the
VR1902 too much, the volume will destroy.
* Flexible cable may not remove easily by transforming the
Bosses by the hot air of the Blower.
2. Five tabs are extended until becoming straight in the direc-
tion of the arrow and then remove the Holder. (Fig.3)
3. Slowly set up the OEL Unit. At this time, the stress is pre-
vented from hanging to flexible cable in the Cathode termi-
nal. (Fig.4)
4. The Cathode terminal is removed according to the procedure
same as the Anode terminal, and the OEL Unit is removed.
(Fig.4)
5. Remove the Holder. (Remove after removing the Cathode ter-
minal without fail.) (Fig.4)
- Installing the OEL Unit
1. Install the Holder in the OEL Unit. (Fig.5)
2. When soldering the flexible cable for the Cathode terminal
on the P.C.board, use a pair of tweezers. First, insert the tips
of tweezers into 2 holes in the flexible cable, then into the 2
holes in the P.C.board. (Fig.5)
3. Position the flexible cable on the P.C.board so that their lands
touch each other. (Fig.5)
4. Apply solder to each pin of the flexible cable. (Fig.5)
* Appropriate soldering iron lightly so that the stress should
not hang to Flexible cable.
5. Lay down the OEL Unit. (Fig.5)
6. Install the Holder. (Fig.3)
7. When soldering the flexible cable for the Anode terminal on
the P.C.board, first, insert the Bosses on the P.C.board into
the 2 holes in the flexible cable. Then, take the same proce-
dures 2 and 3 as that for the Cathode terminal to solder the
cable pins. (Fig.3)
Anode terminal
Holder
Bosses
OEL Unit
Holder
Cathode terminal
OEL Unit
Holder
Fig.3
Fig.4
Fig.5
• OEL Unit is verticallymaintained.
65
KEH-P7900R,P7910R,P7950
7.2 IC
GND
CT
ES
CS 1
2
3
4
Q SR
CT
8
7
6
5 INVIN
V+
SI
CD
SI
OSC
Q1
Q2
+-
VREF1.25V
COMP
PML004AF
PA2028A NJM2360M
66
KEH-P7900R,P7910R,P7950
- Pin Functions (PE5100A)(KEH-P7900R/X1N/EW, KEH-P7910R/X1N/EE)Pin No. Pin Name I/O Function and Operation
1 SWVDD O Grille chip enable output2 dsens I Grille detach sense input3 RDT0 I Rotary encoder input 04 RDT1 I Rotary encoder input 15 TESTIN I Test program mode input
6,7 NC Not used8 FLPILM O Flap illumination output9 NC Not used
10 HTELPW O MIC control output11 reset I Reset input12 NC Not used13 XT1 I Connect to VSS14 VSS GND15 X2 Crystal oscillator connection pin16 X1 Crystal oscillator connection pin17 REGOFF Regulator operation specification signal18 REGC Capacity connection for regulator output stability19 VDD Power supply20 ILMPW O Illumination power supply control output21 SYSPWR O System power control output22 adpw O A/D converter power supply control output23 OELPW O OEL power supply control output24 IPPW O Power supply control output for IP BUS interface IC25 ASENBO O Slave power supply control output26 ROMDATA O ROM collection data output27 NC Not used28 MUTE O System mute output29 fm/AM O RDS decoder power supply control output30 LOCL O Local L output31 LOCH O Local H output32 tunpce@ O EEPROM chip enable output33 VCK O Clock output for electronic volume34 VST O Strobe pulse output for electronic volume35 VDT O Data output for electronic volume36 tmute O Tuner mute output37 NC Not used38 SD I Station detector input39 st I FM stereo input40 VSS GND41 VDD Power supply42 NL2DT I RDS noise level input 243 csens I Flap open/close sense input44 rdslk I RDS LK input45 currq O Tuner voltage FIX output46 RDT I RDS data input47 DRST O RDS reset output
48-50 NC Not used51 SDBW I SD input at NF52 RECIVE O RDS receive output53 SC1 O Cassette mechanism sub motor control output 154 SC2 O Cassette mechanism sub motor control output 255 CM O Cassette mechanism capstan motor control output56 MSIN I Cassette mechanism MS sense input57 DIRO O Cassette mechanism dolby NR B/C select output58 mtlsw I Cassette mechanism metal tape detect input59 loadsw I Cassette mechanism loading switch input60 POS I Cassette mechanism position sense input61 RES I Cassette mechanism reverse sense input62 PCL O Clock adjustment output
67
KEH-P7900R,P7910R,P7950
Pin No. Pin Name I/O Function and Operation63 NES I Cassette mechanism normal sense input64 stby O Cassette mechanism drive IC control output65 PLAY O Cassette mechanism MS gain select output66 NR O Cassette mechanism noise reduction sense output67 RIMUTE O Tape mute output68 NC Not used69 TELIN I HANDS FREE/Cellular mute input70 SMPXS0 O Multiplexor select output 071 SMPXS1 O Multiplexor select output 172 SMPXS2 O Multiplexor select output 273 TEST I GND74 SL I Signal level input75 SAIN I Spectrum analyzer input76 NL1 I RDS noise level input 177 ASLIN I ASL input78 EJTIN I Eject key input79 MODEL I Model select input80 DALMON O For consumption current decease output81 NC Not used82 AVDD A/D converter power supply terminal83 AVREF A/D converter reference voltage terminal84 AVSS GND85 RX I IP BUS data input86 TX O IP BUS data output87 NMI GND88 ldet I PLL lock detect input89 rck I RDS clock input90 RDS57K I RDS 57kHz pulse count input91 isens I Illumination sense input92 asens I ACC power sense input93 bsens I Back up power sense input94 TUNPDI I PLL IC data input95 RXD I Grille data input96 TXD O Grille data output97 tunpck O PLL IC clock output98 TUNPDO O PLL IC data output99 TUNPCE O PLL IC chip enable output
100 PEE O Beep tone output
*PE5100A
30
31
50
51 80
81
100
1
IC's marked by* are MOS type.
Be careful in handling them because they are very
liable to be damaged by electrostatic induction.
68
KEH-P7900R,P7910R,P7950
- Pin Functions (PE5101A)(KEH-P7950/X1N/ES)Pin No. Pin Name I/O Function and Operation
1 SWVDD O Grille chip enable output2 dsens I Grille detach sense input3 RDT0 I Rotary encoder input 04 RDT1 I Rotary encoder input 15 TESTIN I Test program mode input
6,7 NC Not used8 FLPILM O Flap illumination output9 DFSSW O Voice select control output
10 HTELPW O MIC control output11 reset I Reset input12 NC Not used13 XT1 I Connect to VSS14 VSS GND15 X2 Crystal oscillator connection pin16 X1 Crystal oscillator connection pin17 REGOFF Regulator operation specification signal18 REGC Capacity connection for regulator output stability19 VDD Power supply20 ILMPW O Illumination power supply control output21 SYSPWR O System power control output22 adpw O A/D converter power supply control output23 OELPW O OEL power supply control output24 IPPW O Power supply control output for IP BUS interface IC25 ASENBO O Slave power supply control output26 ROMDATA O ROM collection data output27 NC Not used28 MUTE O System mute output29 fm/AM O RDS decoder power supply control output30 LOCL O Local L output31 LOCH O Local H output32 tunpce@ O EEPROM chip enable output33 VCK O Clock output for electronic volume34 VST O Strobe pulse output for electronic volume35 VDT O Data output for electronic volume36 NC Not used37 NC Not used38 SD I Station detector input39 st I FM stereo input40 VSS GND41 VDD Power supply42 NC Not used43 csens I Flap open/close sense input
44-46 NC Not used47 DRELAY O External relay control output48 DRSENS I Door open/close sense input49 DRSYS O Door system select output50 dled O Alarm LED output
51,52 NC Not used53 SC1 O Cassette mechanism sub motor control output 154 SC2 O Cassette mechanism sub motor control output 255 CM O Cassette mechanism capstan motor control output56 MSIN I Cassette mechanism MS sense input57 DIRO O Cassette mechanism dolby NR B/C select output58 mtlsw I Cassette mechanism metal tape detect input59 loadsw I Cassette mechanism loading switch input60 POS I Cassette mechanism position sense input61 RES I Cassette mechanism reverse sense input62 PCL O Clock adjustment output
69
KEH-P7900R,P7910R,P7950
Pin No. Pin Name I/O Function and Operation63 NES I Cassette mechanism normal sense input64 stby O Cassette mechanism drive IC control output65 PLAY O Cassette mechanism MS gain select output66 NR O Cassette mechanism noise reduction sense output67 RIMUTE O Tape mute output68 NC Not used69 TELIN I Cellular mute input70 SMPXS0 O Multiplexor select output 071 SMPXS1 O Multiplexor select output 172 SMPXS2 O Multiplexor select output 273 TEST I GND74 SL I Signal level input75 SAIN I Spectrum analyzer input
76,77 NC Not used78 EJTIN I Eject key input79 NC I Not used80 DALMON O For consumption current decease output81 NC Not used82 AVDD A/D converter power supply terminal83 AVREF A/D converter reference voltage terminal84 AVSS GND85 RX I IP BUS data input86 TX O IP BUS data output87 NMI GND
88-90 NC Not used91 isens I Illumination sense input92 asens I ACC power sense input93 bsens I Back up power sense input94 TUNPDI I PLL IC data input95 RXD I Grille data input96 TXD O Grille data output97 TUNPCK O PLL IC clock output98 TUNPDO O PLL IC data output99 TUNPCE O PLL IC chip enable output
100 PEE O Beep tone output
*PE5101A
30
31
50
51 80
81
100
1
70
KEH-P7900R,P7910R,P7950
*PD5554A
25
26 50
51
7576100
1
- Pin Functions (PD5554A)Pin No. Pin Name I/O Format Function and Operation
1–4 NC Not used5 REM I Remote control reception6 BYTE I VCC joint7 CNVSS I GND
8,9 NC Not used10 reset Reset11 XOUT O Crystal oscillating element connection pin12 VSS GND13 XIN I Crystal oscillating element connection pin14 VDD Power voltage15 nmi I Pull up16 NC Not used
17–20 kd!-$ I Key data 1-421–26 ks!-^ I/O Key strobe input/output 1-627–31 NC Not used
32 ILMD O C Dual illumination33 KYDT O C Key data output34 DPDT I Display data input35 NC Not used36 OEL O C OEL controller ON37 rdy I OEL controller READY38 NC Not used39 hold I Pull up40 NC Not used41 BCLK O C Bus clock42 rd O C Read strobe43 NC Not used44 wr O C Write strobe45 NC Not used46 cs@ O C Bunk address (High)47 cs! O C Bank address (Low)48 cs) O C External ROM chip select
49–59 A19-9 O C Address bus 19-960 VDD Power voltage61 A8 O C Address bus 862 VSS GND
63–70 A7-0 O C Address bus 7-071–86 D15-0 I/O Data bus 15-087–93 NC Not used
94 AVSS Connect to VSS95 NC Not used96 VREF Connect to VSS97 AVCC Connect to VCC
- Pin Functions (PD5536A)Pin No. Pin Name I/O Format Function and Operation
1 VSSO GND2 SFR I CPU SFR input
3–10 DB7-0 I/O CPU data bus input / output 7-011 NPC I Non-precharge mode set input12 VDDI Power supply13 VSSI GND14 SHUNT I Non-luminescence section anode shunt set input15 TIO0 O C Frame period signal output16 TIO1 O C Frame period inversion signal output17 CKC O C Cathode drive clock output18 LS O C Line sync signal output19 CKA O C Anode drive clock output20 D2 O C Anode serial data output (Upper bit)21 D1 O C Anode serial data output (Lower bit)22 CKD O C Anode serial transfer clock output23 NC Not used24 VDDO Power supply25 VSSO GND26 NC Not used
27–30 TEST0-3 I Test mode input 0-331–35 TESTL0-4 I Panel indication test mode brightness set input 0-4
36 VDDI Power supply37 VSSI GND38 BCLK I CPU bus clock signal input39 CE1B I CPU chip enable input 140 CE2 I CPU chip enable input 241 RDB I CPU read strobe input42 WRB I CPU write strobe input43 RSTB I Reset
44–47 CRST3-0 I Cathode reset section set input 3-048 VDDO Power supply
*PD5536A
12
13
24
25 36
37
48
1
PD8063A
72
KEH-P7900R,P7910R,P7950
7.3 OPERATIONAL FLOW CHART
In the above cases, there is the possibility that communicationwith Grille may be no good.If the oscillation time is not 300ms, there is the possibility thatcrystal oscillator may be abnormal.
300ms
300ms
Completes power-on operation. (After that, proceed to each source operation.)
- CSENS is set to H,• Source returns to the original one (before you operate).• CD, MD and TAPE loading functions are available.• Keys except for EJECT key are not available.
Power ON
VDD=5V19pin
BSENS93pin
ASENS92pin
DSENS2pin
Starts communicationwith Grille
microcomputer.
Source keysoperative
Source ON
CSENS43pin
BSENS=L
ASENS=L
DSENS=L
CSENS=L
SYSPW←H21pin
SWVDD←H1pin
ADPW←H22pin
ASENBO←H25pin
73
KEH-P7900R,P7910R,P7950
8. OPERATIONS AND SPECIFICATIONS
8.1 OPERATIONS(KEH-P7900R/X1N/EW)
Head Unit
Steering Remote Controller (CD-SR77)The steering remote controller (CD-SR77) enabling remote control of the head unit is sold separately. Operation is the same as whenusing buttons on the head unit.
DISPLAY button FUNCTION button
VOLUME
Buttons 1-6 AUDIO buttonTA button
SOURCE/OFF button
EQ selector
PTY button
TEXT button
OPEN buttonENTERTAINMENT button
BAND button
5/∞/2/3 button
FUNCTION button
2/3 button
SOURCE/OFF button
5/∞ button
AUDIO button
+/– buttonRaise orlower thevolume.
BAND button
ATT buttonThis lets you quicklylower volume level(by about 90%). Pressonce more to return tothe original volumelevel.
74
KEH-P7900R,P7910R,P7950To
Lis
ten
to M
usic
The
fol
low
ing
expl
ains
the
initi
al o
pera
tions
req
uire
d be
fore
you
can
list
en to
mus
ic.
Not
e:•
Loa
ding
a c
asse
tte in
this
pro
duct
.
1.Se
lect
the
des
ired
sou
rce.
(e.
g. T
uner
)
Eac
h pr
ess
of th
e SO
UR
CE
/OFF
but
ton
sele
cts
the
desi
red
sour
ce in
the
follo
win
g or
der:
CD
pla
yer
(one
dis
c on
ly)
= T
V =
Tun
er =
DA
B (
Dig
ital A
udio
Bro
adca
stin
g) T
uner
=Ta
pe =
Mul
ti-C
D p
laye
r =
Ext
erna
l Uni
t 1 =
Ext
erna
l Uni
t 2 =
AU
X =
Tele
phon
est
andb
y
Not
e:•
Ext
erna
l Uni
t ref
ers
to a
Pio
neer
pro
duct
(su
ch a
s on
e av
aila
ble
in th
e fu
ture
) th
at, a
lthou
gh in
com
-pa
tible
as
a so
urce
, ena
bles
con
trol
of
basi
c fu
nctio
ns b
y th
is p
rodu
ct. T
wo
Ext
erna
l Uni
ts c
an b
eco
ntro
lled
by th
is p
rodu
ct, a
lthou
gh “
Ext
erna
l” is
dis
play
ed w
heth
er y
ou s
elec
t Ext
erna
l Uni
t 1 o
rE
xter
nal U
nit 2
. Whe
n tw
o E
xter
nal U
nits
are
con
nect
ed, t
he a
lloca
tion
of th
em to
Ext
erna
l Uni
t 1or
Ext
erna
l Uni
t 2 is
aut
omat
ical
ly s
et b
y th
is p
rodu
ct.
•In
the
follo
win
g ca
ses,
the
soun
d so
urce
will
not
cha
nge:
*W
hen
a pr
oduc
t cor
resp
ondi
ng to
eac
h so
urce
is n
ot c
onne
cted
to th
is p
rodu
ct.
*W
hen
no ta
pe is
set
in th
is p
rodu
ct.
*W
hen
no m
agaz
ine
is s
et in
the
Mul
ti-C
D p
laye
r.*
Whe
n th
e A
UX
(ex
tern
al in
put)
is s
et to
OFF
. *
Whe
n th
e Te
leph
one
stan
dby
is s
et to
OFF
. •
Whe
n th
is p
rodu
ct’s
blu
e/w
hite
lead
is c
onne
cted
to th
e ca
r’s
Aut
o-an
tenn
a re
lay
cont
rol t
erm
inal
,th
e ca
r’s
Aut
o-an
tenn
a ex
tend
s w
hen
this
pro
duct
’s s
ourc
e is
sw
itche
d O
N. T
o re
trac
t the
ant
enna
,sw
itch
the
sour
ce O
FF.
2.E
xten
d th
e V
OL
UM
E f
orw
ard.
Whe
n yo
u pr
ess
the
VO
LU
ME
, it e
xten
ds f
orw
ard
so th
at it
bec
omes
eas
ier
to r
oll.
Tore
trac
t the
VO
LU
ME
, pre
ss it
aga
in.
Eac
h pr
ess
chan
ges
the
Sour
ce ..
.
3.R
aise
or
low
er t
he v
olum
e.
Rol
ling
the
VO
LU
ME
cha
nges
the
volu
me
leve
l.
Not
e:
•R
oll c
lock
wis
e to
rai
se th
e vo
lum
e le
vel.
•R
oll c
ount
ercl
ockw
ise
to lo
wer
the
volu
me
leve
l.
4.Tu
rn t
he s
ourc
e O
FF.
Hol
d fo
r 1
seco
nd
75
KEH-P7900R,P7910R,P7950
Bas
ic O
pera
tion
of T
uner
Thi
s pr
oduc
t’s A
F fu
nctio
n ca
n be
sw
itche
d O
N a
nd O
FF. A
F sh
ould
be
switc
hed
OFF
for
norm
al tu
ning
ope
ratio
ns.
Man
ual a
nd S
eek
Tuni
ng
•Y
ou c
an s
elec
t th
e tu
ning
met
hod
by c
hang
ing
the
leng
th o
fti
me
you
pres
s th
e 2
/3bu
tton
.
Man
ual T
unin
g (s
tep
by s
tep)
0.5
seco
nds
or le
ss
Seek
Tun
ing
0.5
seco
nds
or m
ore
Not
e:•
If y
ou c
ontin
ue p
ress
ing
the
butto
n fo
r lo
nger
than
0.5
sec
onds
, you
can
ski
pbr
oadc
astin
g st
atio
ns. S
eek
Tun
ing
star
ts a
s so
on a
s yo
u re
leas
e th
e bu
tton.
•St
ereo
indi
cato
r “
” lig
hts
whe
n a
ster
eo s
tatio
n is
sel
ecte
d.
Pres
et T
unin
g
•Y
ou c
an m
emor
ize
broa
dcas
t st
atio
ns in
but
tons
1 th
roug
h 6
for
easy
, one
-tou
ch s
tati
on r
ecal
l.
Pres
et s
tatio
n re
call
2 se
cond
s or
less
Bro
adca
st s
tatio
n pr
eset
mem
ory
2 se
cond
s or
mor
e
Not
e:•
Up
to 1
8 FM
sta
tions
(6
in F
M 1
, FM
2 a
nd F
M 3
) an
d 6
MW
/LW
sta
tions
can
be
stor
ed in
mem
ory.
•Y
ou c
an a
lso
use
the
5or
∞bu
ttons
to r
ecal
l bro
adca
st s
ta-
tions
mem
oriz
ed in
but
tons
1 th
roug
h 6.
Ban
d FM 1
=FM
2 =
FM 3
=M
W/L
W
Pres
et N
umbe
r Ind
icat
or Ban
d In
dica
tor
Freq
uenc
y In
dica
tor
76
KEH-P7900R,P7910R,P7950B
asic
Ope
ratio
n of
Cas
sette
Pla
yer
Not
e:•
Be
sure
to c
lose
the
fron
t pan
el a
fter
load
ing
or e
ject
ing
a ca
sset
te.
Dir
ectio
n In
dica
tor
Switc
hing
the
Dis
play
Eac
h pr
ess
of th
e D
ISPL
AY
but
ton
chan
ges
the
disp
lay
in th
efo
llow
ing
orde
r:Pl
ayba
ck m
ode
A (
Play
tim
e) =
Play
back
mod
e B
Pre
caut
ion:
•To
avo
id a
mal
func
tion,
mak
e su
re th
at n
o m
etal
obj
ect
com
es in
to c
onta
ct w
ith th
e te
rmin
als
whe
n th
e fr
ont
pane
l is
open
.
Ejec
t Not
e:•
The
Tap
e fu
nctio
n ca
n be
turn
ed O
N/O
FF w
ith th
e ca
sset
te ta
pe r
emai
ning
in th
ispr
oduc
t.
Fast
For
war
d/Re
win
d an
d M
usic
Sea
rch
•E
ach
pres
s of
the
3bu
tton
sel
ects
Fas
t F
orw
ard
or F
orw
ard-
Mus
ic S
earc
h.FF
(Fa
st F
orw
ard)
=F-
MS
(For
war
d-M
usic
Sea
rch)
=N
orm
al P
layb
ack
•E
ach
pres
s of
the
2bu
tton
sel
ects
Rew
ind
or R
ewin
d-M
usic
Sear
ch.
RE
W (
Rew
ind)
=R
-MS
(Rew
ind-
Mus
ic S
earc
h) =
Nor
mal
Pla
ybac
k
Not
e:•
Fast
For
war
d/R
ewin
d an
d M
usic
Sea
rch
can
be c
ance
led
by p
ress
ing
the
BA
ND
but-
ton.
Cass
ette
Loa
ding
Slo
t
Not
e:•
“Met
al”
appe
ars
auto
mat
ical
ly w
hen
a m
etal
or
chro
me
tape
is in
sert
ed. N
othi
ng is
dis
play
ed f
or a
nor
mal
tape
.
Play
Tim
e In
dica
tor
Not
e:•
The
con
tinuo
us p
layb
ack
time
coun
t sta
rts
at “
00 m
in00
sec
” at
the
follo
win
g tim
es.
*W
hen
a ta
pe is
inse
rted
.*
Whe
n th
e ta
pe d
irec
tion
is c
hang
ed.
*W
hen
you
rew
ind
the
tape
sid
e cu
rren
tly p
layi
ng
back
to th
e be
ginn
ing.
•T
he c
ontin
uous
pla
ybac
k tim
e co
unt i
s ha
lted
whe
n fa
st-f
orw
ardi
ng/r
ewin
ding
and
whi
le th
e M
usic
Sea
rch
func
tion
is o
pera
ting.
Ope
n Not
e:•
Use
to o
pen
the
fron
tpa
nel w
hen
load
ing
orej
ectin
g a
cass
ette
. (T
heill
ustr
atio
n on
the
righ
tsh
ows
the
fron
t pan
elop
en.)
Dir
ectio
n Ch
ange
77
KEH-P7900R,P7910R,P7950
Dis
c Se
arch
Dis
c N
umbe
r Sea
rch
(for 6
-Dis
c, 1
2-D
isc
type
s)
•Y
ou c
an s
elec
t di
scs
dire
ctly
wit
h th
e 1
to 6
but
tons
. Jus
t pr
ess
the
num
-be
r co
rres
pond
ing
to t
he d
isc
you
wan
t to
list
en t
o.
Not
e:•
Whe
n a
12-D
isc
Mul
ti-C
D P
laye
r is
con
nect
ed a
nd y
ou w
ant t
o se
lect
dis
c 7
to 1
2, p
ress
the
1 to
6 b
utto
ns f
or 2
sec
onds
or
long
er.
Not
e:•
The
Mul
ti-C
D p
laye
r m
ay p
erfo
rm a
pre
para
tory
ope
ratio
n, s
uch
as v
erif
ying
the
pres
ence
of
a di
sc o
r re
adin
g di
sc in
form
atio
n, w
hen
the
pow
er is
turn
ed O
N o
r a
new
dis
c is
sel
ecte
d fo
rpl
ayba
ck. “
Rea
dy”
is d
ispl
ayed
.•
If th
e M
ulti-
CD
pla
yer
cann
ot o
pera
te p
rope
rly,
an
erro
r m
essa
ge s
uch
as “
ER
RO
R-1
4” is
disp
laye
d. R
efer
to th
e M
ulti-
CD
pla
yer
owne
r’s
man
ual.
•If
ther
e ar
e no
dis
cs in
the
Mul
ti-C
D p
laye
r m
agaz
ine,
“N
O D
ISC
” is
dis
play
ed.
Bas
ic O
pera
tion
of M
ulti-
CD P
laye
rT
his
prod
uct c
an c
ontr
ol a
Mul
ti-C
D p
laye
r (s
old
sepa
rate
ly).
Trac
k Se
arch
and
Fas
t For
war
d/Re
vers
e
•Y
ou c
an s
elec
t be
twee
n T
rack
Sea
rch
or F
ast
For
war
d/R
ever
se b
y pr
essi
ng t
he 2
/3bu
tton
for
a di
ffer
ent
leng
th o
f ti
me.
Tra
ck S
earc
h0.
5 se
cond
s or
less
Fast
For
war
d/R
ever
seC
ontin
ue p
ress
ing
Play
Tim
e In
dica
tor
Trac
k N
umbe
r Ind
icat
orD
isc
Num
ber I
ndic
ator
Corr
espo
ndin
g D
ispl
ay In
dica
tions
and
But
tons
T
his
prod
uct’s
dis
play
fea
ture
s K
ey G
uida
nce
Indi
cato
rs. T
hese
ligh
t to
indi
cate
whi
ch o
fth
e 5
/∞/2
/3, F
UN
CT
ION
and
AU
DIO
but
tons
you
can
use
. Whe
n yo
u’re
in th
eFu
nctio
n M
enu,
Det
aile
d Se
tting
Men
u, I
nitia
l Set
ting
Men
u or
Aud
io M
enu
, the
y al
som
ake
it ea
sy to
see
whi
ch 5
/∞/2
/3bu
ttons
you
can
use
to s
witc
h fu
nctio
ns O
N/O
FF,
switc
h re
peat
sel
ectio
ns a
nd p
erfo
rm o
ther
ope
ratio
ns.
Indi
cato
r an
d co
rres
pond
ing
butto
ns a
re s
how
n be
low
.
7H
ead
Uni
t
7St
eeri
ng R
emot
e
7 D
ispl
ayCo
ntro
ller
Whe
n 1
is li
t in
the
disp
lay,
per
form
app
ropr
iate
ope
ratio
ns w
ith th
e z
butto
ns.
Whe
n 2
is li
t in
the
disp
lay,
it in
dica
tes
that
you
are
in th
e Fu
nctio
n M
enu,
Det
aile
dSe
tting
Men
u or
Ini
tial S
ettin
g M
enu.
You
can
sw
itch
betw
een
each
of
thes
e m
enus
and
betw
een
diff
eren
t mod
es in
the
men
us u
sing
but
ton
xon
the
head
uni
t or
stee
ring
rem
ote
cont
rolle
r.W
hen
3is
lit i
n th
e di
spla
y, it
indi
cate
s yo
u ar
e in
the
Aud
io M
enu.
You
can
sw
itch
betw
een
mod
es in
the
Aud
io M
enu
usin
g bu
tton
con
the
head
uni
t or
stee
ring
rem
ote
cont
rolle
r.
xz
c
z
xc
12 3
78
KEH-P7900R,P7910R,P7950
+ ≠
+ ≠
+ ≠
+ ≠
- CONNECTION DIAGRAM(KEH-P7900R/X1N/EW)
Con
nect
ing
the
Uni
ts
The
pin
pos
ition
of
the
ISO
con
nect
or w
ill d
iffe
rde
pend
s on
the
type
of
vehi
cle.
Con
nect
6*
and
7*w
hen
Pin
5 is
an
ante
nna
cont
rol t
ype.
In
anot
her
type
of
vehi
cle,
nev
er c
onne
ct 6
* an
d 7*
.
Not
e:D
epen
ding
on
the
kind
of
vehi
cle,
the
func
tion
of 3
* an
d 5*
may
be
diff
eren
t. In
this
cas
e, b
esu
re to
con
nect
2*
to 5
* an
d 4*
to 3
*.
4*5*3*
1*
2*T
his
prod
uct
Ant
enna
jack
Con
nect
lead
s of
the
sam
eco
lor
to e
ach
othe
r.
Cap
(1*
)W
hen
not u
sing
this
term
inal
,do
not
rem
ove
the
cap.
Yel
low
(3*
)B
ack-
up(o
r ac
cess
ory)
Yel
low
(2*
)To
term
inal
alw
ays
supp
lied
with
pow
er r
egar
dles
s of
igni
tion
switc
h po
sitio
n.
Red
(5*
)A
cces
sory
(or
back
-up)
Red
(4*
)To
ele
ctri
c te
rmin
al c
ontr
olle
d by
igni
tion
switc
h (1
2 V
DC
)O
N/O
FF.
Bla
ck (
grou
nd)
To v
ehic
le (
met
al)
body
.
ISO
con
nect
orN
ote:
In s
ome
vehi
cles
, the
ISO
con
nect
or m
aybe
div
ided
into
two.
In
this
cas
e, b
e su
re to
conn
ect t
o bo
th c
onne
ctor
s.
Yel
low
/bla
ckIf
you
use
a c
ellu
lar
tele
phon
e, c
onne
ct it
via
the
Aud
io M
ute
lead
on
the
cel-
lula
r te
leph
one.
If
not,
keep
the
Aud
io M
ute
lead
fre
e of
any
con
nect
ions
.
Spea
ker
lead
sW
hite
: Fro
nt le
ft +
Whi
te/b
lack
: Fro
nt le
ft ≠
Gra
y: F
ront
rig
ht +
Gra
y/bl
ack
: Fro
nt r
ight
≠G
reen
: Rea
r le
ft +
or N
ot u
sed
Gre
en/b
lack
: Rea
r le
ft ≠
or N
ot u
sed
Vio
let
: Rea
r ri
ght +
or S
ubw
oofe
r +
Vio
let/b
lack
: Rea
r ri
ght ≠
or S
ubw
oofe
r ≠
Blu
e/w
hite
(6*
)
To A
uto-
ante
nna
rela
y co
n-tr
ol te
rmin
al (
max
. 300
mA
12 V
DC
).
Syst
em r
emot
e co
ntro
l
Blu
e/w
hite
To s
yste
m c
ontr
ol te
rmin
al o
f th
e po
wer
amp
(max
. 300
mA
12
V D
C).
Con
nect
ing
cord
s w
ith R
CA
pin
plu
gs
(sol
d se
para
tely
)
Pow
er a
mp
(sol
d se
para
tely
)
Pow
er a
mp
(sol
d se
para
tely
)
IP-B
us in
put (
Blu
e)
Blu
e/w
hite
(7*
)
Mul
ti-C
D p
laye
r(s
old
sepa
rate
ly)
Subw
oofe
rou
tput
or
Non
Fadi
ng O
utpu
t
IP-B
US
cabl
e
Ora
nge
To li
ghtin
g sw
itch
term
inal
.
Fron
t spe
aker
Subw
oofe
r
Left
Fron
t spe
aker
Subw
oofe
r
Rig
ht
Use
this
for
con
nect
ions
whe
n yo
u ha
ve th
e se
pa-
rate
ly a
vaila
ble
ampl
ifie
r.
Not
e:W
hen
a su
bwoo
fer
is c
onne
cted
to th
is u
nit i
nste
ad o
f a
rear
righ
t spe
aker
, do
not c
onne
ct th
e re
ar le
ft s
peak
er le
ad to
any
-th
ing.
For
det
ails
, ref
er to
the
Initi
al S
ettin
g M
enu
in th
eO
pera
tion
Man
ual.
Fron
t out
put
Ref
er to
a H
ands
free
Tele
phon
e un
it’s
man
ual
(sol
d se
para
tely
).
Fuse
hol
der
Fuse
res
isto
r
Fuse
res
isto
r
79
KEH-P7900R,P7910R,P7950
General(EW,EE model)Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)Grounding system ........................................ Negative typeMax. current consumption ...................................... 10.0 ADimensions
Loudness contour(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)
(volume: –30 dB)HPF
Frequency ............................................ 50/80/125 HzSlope ........................................................ –12 dB/oct.
Amplifier(ES model)Continuous power output is 22 W per channel min. into 4 ohms, both channels driven 50 to 15,000 Hz with no more than 5% THD.Maximum power output ...................................... 45 W × 4
45 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for Subwoofer)Load impedance
...................... 4 Ω (4 – 8 Ω [2 Ω for 1 ch] allowable)Preout maximum output level/output impedance
Loudness contour(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)
(volume: –30 dB)HPF
Frequency ............................................ 50/80/125 HzSlope ........................................................ –12 dB/oct.