KEEPING EUROPE’S POWER FLOWING 4 – 6 June 2013 Messe Wien, Vienna, Austria www.powergeneurope.com Owned and Produced by: Presented by: Supported by: SHOW GUIDE Register as a Conference Delegate before or on 17 May 2013 and take advantage of discounted early bird delegate rates. Co-located with:
50
Embed
KEEPING EUROPE’S POWER FLOWING › zentral › news › aktuell › ...Europe conference & exhibition. I hope it is going to whet your appetite for what is in store when Europe’s
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
KEEPING EUROPE’S POWER
FLOWING4 – 6 June 2013Messe Wien, Vienna, Austriawww.powergeneurope.com
Owned and Produced by: Presented by: Supported by:
SHOW GUIDERegister as a Conference Delegate before or on 17 May 2013 and take advantage of discounted early bird delegate rates.
Co-located with:
SPONSORS &SUPPORTERS
PennWell extends its thanks to the following organizations who have lent their generous support to POWER-GEN Europe
CONTENTS ®ISTRATION2 Welcome to POWER-GEN Europe
3 Welcome to POWER-GEN Europe from Reinhold Mitterlehner, Austrian Economy Minister
4 Welcome to POWER-GEN Europe From Dr. Christoph Leitl, President of WKO.
5 Schedule of Events
6 Joint Opening Keynote Session
7 Joint Plenary Panel Discussion
8 - 9 Conference Grid POWER-GEN Europe
10 Conference Grid Renewable Energy World Europe
11 - 27 Conference Programme
27 POWER-GEN Europe Energy Storage Focus
28 - 29 POWER-GEN Europe Advisory Board
30 Intellectual Property Rights Alliance
31 Specialized Marketing, Sales & Communication Techniques to the Power
Generation Market / POWER 100
32 Best Paper Awards and Closing Reception
33 DirectEventConnect (Attendees)
34 Technical Tours / Russian Energy Ministry Seminar
35 Exhibitor Committee
36 Exhibit at POWER-GEN Europe
37 DirectEventConnect (Exhibitors)
38 Contacts
39 POWER-GEN TV
40 Utility Partner Programme
41 Press Office, PR & Social Media
43 Hotels & About Vienna
44 Map & Directions to Messe Wien
45 - 46 Registration forms
www.powergeneurope.com 1
register NOW FOr POWer-geN eUrOPe
Early Bird DiscountsRegister as a Conference Delegate before or on 17 May 2013 and take advantage of discounted early bird delegate rates.
Free Exhibition EntryPre-register as a visitor before or on 17 May 2013 for FREE admittance to Europe’s largest international power industry exhibition. After 17 May 2013, you will need to register onsite at the Messe Wien and entrance to the Exhibition will be subject to a charge of €40.
Register OnlineOnline registration via the POWER-GEN Europe website is a straightforward and simple process. Just log-on to www.powergeneurope.com, select the registration tab and then click on the online registration link.
Registration FormSimply complete the form on the back of this document and fax it to: +1 918 831 9161. Alternatively please mail your completed form to us at: PennWell/POWER-GEN Europe 2013, PO Box 973059, Dallas, TX75397-3059 United States or email to [email protected]
Please note: If you would prefer to register online for co-located Renewable Energy World Europe instead, you can do so by logging onto www.renewableenergyworld-europe.com
Registering for either of the events gives you access to both
Attendee Badge PolicyAll registered attendees will be issued an Attendee Badge and badge holder, as well as the appropriate event tickets and electronic business card. Please wear your badge at all times when attending official POWER-GEN Europe functions. Badges are a security measure to identify people who have a legitimate reason to be in the conference and exhibit areas. If you are not wearing your badge, you may be asked to show proof of your registration and picture ID.
WELCOME TOPOWER-GEN EUROPE
Nigel BlackabyConference Director, POWER-GEN Europe
2 www.powergeneurope.com
Welcome to the preliminary guide to this year’s POWER-GEN Europe conference & exhibition. I hope it is going to whet your appetite for what is in store when Europe’s power industry meets 4-6 June in Vienna.
There is little doubt that these are challenging times for power industry professionals, as the sector in Europe faces up to significant change. The economic downturn may have tempered power demand in the short term, but a viable framework for investment in new generation and supporting infrastructure must be put in place if the energy transition embodied in Europe’s 20-20-20 targets is to be achieved. Just under €1 trillion of investment will be needed in generation, transmission and distribution up to 2020 across Europe, according to the IEA in its 2012 World Energy Outlook.
Much of this investment will be in renewable energy technologies and once again, POWER-GEN Europe will be staging alongside Renewable Energy World Europe, creating a joint forum addressing all the key issues across the entire spectrum of the power generation industry. Integration will again be a major theme, with the conferences sharing an entire track devoted to one of the most crucial issues facing our sector.
This is the first occasion that POWER-GEN Europe has been held in Vienna in its 21- year history, but judging by the welcome that has been afforded us and the reaction we have received, it is proving a well-judged and popular choice. Austria straddles western and eastern Europe and the event in June offers a valuable opportunity to share experiences between electricity professionals from every part of the continent.
With advanced mobile devices, electronic data and social media, dominating the way in which we communicate, it is increasingly important that we take time out to meet as an industry face-to-face, to discuss the issues of the day, become acquainted with new technologies and techniques and build the business networks that will open doors to new commercial and personal opportunities. The three days of POWER-GEN Europe offers all this through its comprehensive strategic and
technical conference sessions, its vast exhibition floor and its various networking events. Despite the challenging market condition in Europe, there will be more exhibiting companies than ever in Vienna and a conference programme of high quality presentations across some nine parallel tracks.
Our opening keynote session offers high level government and industry speakers and our big plenary debate, led by HARDtalk’s Stephen Sackur, will reveal the truth about the challenges Europe’s power industry faces and what the future may hold.
This Pre-Show Guide contains the entire conference programmes for both POWER-GEN Europe and Renewable Energy World Europe with all sessions open to registered delegates from both events. Any additions or modifications to the programme will be reflected on the respective websites:
You will also find details of the many other activities that form part of POWER-GEN Europe such as the technical tours, workshop and networking events, not to mention a list of the exhibitors you will have the opportunity of meeting in Vienna, plus a handy tool to help plan your visit. Most importantly, you can find out all the ways to register to attend POWER-GEN Europe on page 45-46 and how you can take advantage of the Early Bird discounts on offer.
Our industry is undergoing a period of major and complex change. Emerging successfully from this transition will be those individuals and organisations that have embraced the change, developed and adopted new technologies and implemented visionary business strategies. Make sure you are in the vanguard of this change by joining us in Vienna this June when the industry gathers for POWER-GEN Europe.
Kind regards,
Nigel BlackabyConference Director, POWer-geN europe
Dear Colleagues,
WELCOME TOPOWER-GEN EUROPE
As the responsible Austrian Federal Minister for Energy I am pleased that the POWER-GEN Europe Conference and Exhibition 2013 will take place in Vienna.
Located in the centre of Europe, Austria acts as an important energy hub. Security and quality of supply are top priorities in the Austrian energy policy. A further priority is to achieve the greatest possible level of sustainability with the gradual integration of all available potentials for renewable energy production and energy efficiency. Thanks to its Alpine storage power plants, Austria enjoys an important role within the European energy system and continues to develop renewable electricity production in Central Europe. By supplying peak and balancing energy from their storage power plants in the Alps, Austria’s electricity utilities also significantly support the stability of electricity supplies throughout Europe.
As a business location, Austria offers an excellent framework for the energy industry. Austria’s know-how and expertize in the development of energy systems is valued around the world. Many Austrian companies are among the world market leaders in green technologies.
The recent developments in energy markets and in energy technologies give rise to many issues for discussion: How will energy demand develop over the next several years and how can we secure energy supply? How will energy prices develop over the coming years among different geographic regions and how can we maintain competitiveness in Europe? How will greenhouse gas emissions grow over the coming years and how can we bring them down in a globally coordinated manner?
The subject of POWER-GEN 2013 “Keeping Europe’s Power Flowing” describes the political agenda for the next few years and shows the need for further political and business leadership in Europe.
Together we will try to find some answers at one of the most comprehensive events in the field of energy industry in Europe.
I look forward to welcoming you in Vienna at POWER-GEN Europe 2013.
Dr. Reinhold MitterlehnerFederal Minister of Economy, Family and Youth Republic of Austria
Dr. Reinhold MitterlehnerFederal Minister of Economy, Family and Youth Republic of Austria
www.powergeneurope.com 3
WELCOME TOPOWER-GEN EUROPE
Dr. Christoph LeitlPresident of the Austrian Federal Economic Chamber
4 www.powergeneurope.com
Austria: World Expertise in the Energy Industry
The Austrian Federal Economic Chamber is pleased to welcome the POWER-GEN Europe conference and exhibition and its co-located event Renewable Energy World Europe to Vienna.
With its biggest tradeshow floor yet, POWER-GEN Europe and Renewable Energy World Europe are adopting the theme of “Keeping Europe’s Power Flowing.” The accompanying technical conference sessions and strategic issues will be presented as part of the energy revolution. I am convinced that this will not only strike a significant chord, but will also accelerate the development of more sustainable forms of energy.
Leading companies in the Austrian and international energy industry will benefit from the know-how from the fields of conventional and renewable energy at POWER-GEN Europe and Renewable Energy World Europe.
Austria is the perfect platform for these events through its leadership in alternative forms of energy and its technology leadership in many areas of renewable energy. We are very excited at the prospect of the three-day conference and exhibition, that not only links different fields of technology, but also promotes important interaction with the public.
I wish the participants and organizers every success and many fruitful business contacts that will help meet the challenge of energy supply for the future, responsibly.
Dr. Christoph LeitlPresident of the Austrian Federal Economic Chamber
SCHEDULE OFEVENTS
sUNDay 2 JUNe 2013Registration Open 14:00 – 18:00 Foyer A
MONDay 3 JUNe 2013
Registration Open 08:00 – 17:00 Foyer ATechnical Tours 09:00 – 17:00 Meeting Point: Foyer APre-Conference Workshop 09:30 – 12:30 Congress Center
tUesDay 4 JUNe 2013Registration Open 08:00 – 18:00 Foyer AJoint Opening Keynote Session 09:30 – 11:00 Congress Center, StraussExhibition Floor Open 11:00 – 18:00 Halls A, B & CDelegate Lunch 12:30 – 14:00 Delegate Restaurant, Hall CConference Session 1 14:00 – 15:30 Congress CenterDelegate Coffee Break 15:30 – 16:00 Congress CenterConference Session 2 16:00 – 17:30 Congress CenterOpening Reception 17:00 – 18:30 Exhibit Floor
WeDNesDay 5 JUNe 2013Registration Open 08:00 – 18:00 Foyer AExhibition Floor Open 09:00 – 18:00 Halls A, B & CConference Session 3 09:00 – 10:30 Congress CenterDelegate Coffee Break 10:30 – 11:00 Congress CenterConference Session 4 11:00 – 12:30 Congress CenterDelegate Lunch 12:30 – 14:00 Delegate Restaurant, Hall CJoint Plenary Panel Discussion 14:00 – 15:30 Congress Center, StraussDelegate Coffee Break 15:30 – 16:00 Congress CenterConference Session 5 16:00 – 17:30 Congress CenterNetworking Reception 17:30 – 19:30 Exhibit Floor
thUrsDay 6 JUNe 2013Registration Open 08:00 – 16:00 Foyer AExhibition Floor Open 09:00 – 16:00 Halls A,B, & CConference Session 6 09:00 – 10:30 Congress CenterDelegate Coffee Break 10:30 – 11:00 Congress CenterConference Session 7 11:00 – 12:30 Congress CenterDelegate Lunch 12:30 – 14:00 Delegate Restaurant, Hall CBest Paper Awards & Closing Reception 15:00 – 16:00 Delegate Restaurant, Hall C
Tuesday 4 June 201309:30 – 11:00Room: Strauss 2-3, Ground Floor, Congress CenterSession is open to all registered attendees
Begin your visit to POWER-GEN Europe by joining your fellow power industry professionals at the scene-setting joint opening keynote session. The keynote takes place prior to the opening of the exhibition floor and all attendees are welcome.
Introduction and Opening Remarks:Nigel Blackaby, Director of Conferences, PennWell International Power Group, UK
KEYNOTE SPEAKERS:
reinhold Mitterlehner, Federal Minister, economy, Family & youth, austria
Reinhold Mitterlehner is currently the Federal Minister of Economy, Family and Youth for Austria, responsible for national energy strategy and policy. From 1980 to 1992 Mr. Mitterlehner worked for the Upper Austrian Economic Chamber, where his last position was Head of the Marketing Department. From 1992 to 2000 he was Secretary General of the Austrian Economic League (Wirtschaftsbund) in Vienna and in July 2000 he became Deputy Secretary General of the Austrian Economic Chamber (WKO). During his political career Reinhold was a local councillor in Ahorn from 1991 to 1997 and from that position he went on to become a Member of the Austrian Parliament (National Council) on 8 February 2000, where he served as Chairman of the Economic and Industrial Affairs Committee from 2001 to 2008. In May 2002 he became District Party Chairman of the Austrian People’s Party (ÖVP) for the district of Rohrbach.
Reinhold Mitterlehner was born in 1955 in Helfenberg/Upper Austria, attended grammar school in Rohrbach and studied law in Linz; he also completed a post-graduate course in association management in Fribourg.
alexander Novak, russian Minister of energy, Ministry of energy, russia
Alexander Novak was appointed Minister of Energy of Russian Federation in May 2012. He was awarded with the Order of Honour, letters of commendation of the President and the Government of Russian Federation. Between 1988-2000 Mr. Novak worked at the A. P. Zaveniagin Norilsk Mining & Metallurgical Combine (later the A. P. Zaveniagin Norilsk Mining & Metallurgical Combine, JSC). He was then promoted from a hydro metallurgist of the category 1 to a Deputy HR Director – Chief Management Officer of the Arctic branch in the Norilsk Mining Company, JSC.
During 2000-2002 he worked as a Deputy Chief majoring in Finances and Economics in Norilsk, as the First Deputy Chief of Norilsk. From 2002-2008 Alexander worked in the administration of Krasnoyarsk region: the Deputy Governor – Head of the Chief Financial Administration, the First Deputy Governor, the First Deputy Governor – Chairman of the Government. Since September, 2008 – the Deputy Minister of Finance of Russian Federation, since October, 2011 – a Member of Ministry of Finance Board.
Alexander Valentinovich Novak was born in August 23, 1971 in Avdeevka of Donetsk region in the USSR. He graduated from Norilsk Industrial Institute in 1993, Economics and Administration in Metallurgy Department, from Lomonosov Moscow State University in 2009, majoring in Management.
Philippe Cochet, President of alstom thermal Power and executive Vice-President, alstom
Philippe Cochet was appointed President of Alstom Thermal Power and Executive Vice-President of Alstom in July 2011. Alstom’s Thermal Power Sector has sales of over €9 billion (in 2010/11) and 38,000 employees. It covers gas, steam and nuclear power generation as well as the service and automation & control activities. Prior to his appointment to lead Thermal Power, Mr. Cochet was VP of Alstom Hydro and Wind.
Cochet is a graduate engineer from the CESTI (Centre d’Etudes Supérieures de Techniques Industrielles). He began his career as a consultant. From 1988 to 1994, he held different positions in Thomson Multimedia and at the end of 1994 he joined General Electric Medical Systems Europe (GEMS) where he was Vice-President Operations Europe, Vice-President Eastern Europe and Senior Vice-President X Ray division. Other positions held include, Executive Vice-President of Operations and a member of the board of Directors of the Hager Group
Wednesday 5 June 201314:00 - 15:30 Room: Strauss 2-3, Ground Floor, Congress CenterSession is open to all registered delegates
LIBERALIzATION AND DECARBONIzATION: ROADMAP OR ROADBLOCK?The European Commission, supported by Eurelectric, is pursuing twin goals of a free power market across the EU and eliminating carbon emissions from the sector, including a significant switch to renewable energy. Our high level panel will assess how compatible these goals are with the policies of individual member states, with creating signals for investment and maintaining a globally competitive Europe. Moderator, Stephen Sackur, will not permit any ‘fence sitting’ in probing the panel’s frank views on a variety of subjects, including the wisdom of current policies in ensuring aging plant and infrastructure is replaced, smart technology is rolled-out and utilities remain solvent.
Moderator: stephen sackur, international Journalist and tV Presenter, UK
Stephen Sackur returns once again to moderate our Plenary Panel discussion having led the debate at our last three POWER-GEN Europe Plenary sessions. A popular performer, Stephen demonstrates a firm grasp of the key issues and a willingness to press our panellists for straight answers. Stephen Sackur is identified around the world as the presenter of HARDtalk, the flagship current affairs interview programme aired on BBC World and the BBC News Channel. In 2012, Stephen’s interviewees have included dictators, democratic reformers and drug traffickers, plus in the field of energy, the chief economist of the International Energy Agency, Fatih Birol.
www.powergeneurope.com 7
Nikolaus Berlakovich Minister, Federal Ministry of agriculture, Forestry, environment and Water Management, austria
Niki Berlakovich is the Minister for Federal Ministry of Agriculture, Forestry, Environment and Water Management in Austria, a role he took on in December 2008. From 1998 to 2000 he was Managing Director of the Club of the Austrian Peoples Party in the Federal Province of Burgenland and from 2002 to 2005 he was Head of the Parliamentary Group of the Provincial Parliamentary Fraction of Burgenland of the Austrian People’s Party. In May 2005 he became a member of the Provincial Parliament of the Federal Province of Burgenland as Provincial Councillor for Agriculture, Forestry, Water and Waste Management.
Niki Berlakovich’s wish to play an active role in politics and to care about the concerns of the people led first to the Municipal Council of his home village Großwarasdorf, where he has also taken over the office of Vice-Mayor. In 1991 he became the youngest delegate to the Provincial Parliament of the Federal Province of Burgenland.
giuseppe Zampini Chief executive Officer, ansaldo energia, italy
Guiseppe Zampini was appointed Chief Executive Officer for Ansaldo Energia in 2001. Prior to this he joined the company in 1997 as General Manager. Giuseppe Zampini is a member of ASME and ANIMP/Federprogetti.
Working from the outset in the power generation sector, Mr. Zampini started his career in 1972 at Progettazione Meccaniche Nucleari, before moving on to Nira Spa where
he acquired international experience on various projects. Following these experiences, he was appointed to head the Ansaldo Division responsible for energy and steam production plants (cogeneration) in 1989. From 1990 to 1995 Zampini set up and managed Ansaldo Industria of America, acquiring experience in the field of project financing.
susanna Zapreva Chief executive Officer, Wien energie, austria
Dipl.-Ing. Dr. Susanna Zapreva is the Chief Executive Officer for Wien Energie. Dr. Zapreva graduated in electrical engineering from the Vienna University of Technology, receiving her doctorate in 2000. She began her career as a consultant in the energy industry. In 2001, she joined Wien Energie Wienstrom. Here she was responsible for carrying out measures associated with market liberalisation and played an active role in the setting up of EnergieAllianz Austria.
Between 2002 and 2008, Ms Zapreva was in charge of a variety of different departments and divisions, and her most responsibility was as an authorised signatory at Wien Energie Wienstrom for sales services. In March 2009, Ms Zapreva was appointed General Manager of Wien Energie Wienstrom.
Since April 2010, Ms Zapreva has been General Manager of Wien Energie GmbH and responsible for: Energy production, energy efficiency planning and procurement for all group companies, energy trading, regenerative production and subsidiary management, telecommunications, human resources, organization and legal affairs, as well as strategy and public affairs.
CONFIRMED PANELLISTS:
Further panellists to be confirmed
POWER-GEN EUROPECONFERENCE GRID
DAY 1 - TUESDAY 4 JUNE DAY 1 - TUESDAY 4 JUNE
tUes
Da
y 4
JUN
e
09:30 - 11:00Joint Opening Keynote session
(Room: Strauss 2–3)Joint Opening Keynote session
(room: strauss 2–3)
12:30 - 14:00 Delegate Lunch Delegate Lunch
traCK 1: strategies FOr the eUrOPeaN POWer seCtOr
(Room: Lehar 1)
traCK 2: rOaD tO DeCarBONiZatiON - CCs, eNergy
eFFiCieNCy & ChP(Room: Lehar 2)
traCK 3: gas FireD POWer teChNOLOgy
(Room: Lehar 3)
traCK 4: therMaL & NUCLear POWer PLaNts (Room: Lehar 4)
traCK 5: eLeCtriCaL & aUtOMatiON FOr POWer
geNeratiON (Room: Stolz 1)
traCK 6: OPeratiON, MaiNteNaNCe, reFUrBishMeNt
& OPtiMiZatiON (Room: Stolz 2)
JOiNt iNtegratiON traCK(Room: Schubert 6)
Session 114:00 - 15:30
EU Strategies Flexible Operation at Low CO2
Large Gas Turbine Technology Update I Large Advanced Power Stations Combustion Optimization 1A: Retrofits &
Chair: Nigel Blackaby, Director of Conferences, PennWell International Power Group, UKReinhold Mitterlehner, Federal Minister, Economy, Family & Youth, Austria
Alexander Novak, Russian Minister of Energy, Ministry of Energy, Russia
Philippe Cochet, President of Alstom Thermal Power and Executive Vice-President, Alstom
12:30 – 14:00 DeLegate LUNCh
TRACK 1: STRATEGIES FOR THE EUROPEAN POWER SECTOR
SESSION 1: EU STRATEGIESroom: Lehar 114:00 – 15:30Political turmoil in the EU (capacity markets, CCS support, EU-ETS adaptations…) is happening in 2013. What drives the EU Commission and how does this impact the industry strategies?
Chair: Patrick Clerens, Secretary General, EPPSA - European Power Plant Suppliers Association, BelgiumCo-Chair: Eric Adams, Client Engagement and Work Winning Director, Parsons Brinckerhoff, United Kingdom
Update of eU energy and Climate Policies relevant for Power generationPierre Dechamps, Adviser for Energy and Climate Change, European Commission, Belgium
as in Finance, integration is the Only Way Forward for energy in europeGiles Dickson, VP Environmental Policies & Global Advocacy, Alstom, FranceCo-Author: Philippe Paelinck, Director CO2 Systems Business Development, Alstom Power, France
impact of eU energy and Climate PoliciesMichael Fübi, Chief Executive Officer, RWE Technology GmbH, GermanyCo-Author: Phillipp Meyer, Electrical Engineering and I&C, RWE Technology GmbH, Germany
TRACK 2: ROAD TO DECARBONIzATION - CCS, ENERGY EFFICIENCY & CHP
SESSION 1: FLExIBLE OPERATION AT LOW CO2
room: Lehar 214:00 – 15:30Presentations of flexible CCS and CHP solutions followed by a panel discussion
Chair: Bernt Frydenberg, Advisor – CDM Strategy, Mercapto Consult, DenmarkCo-Chair: Philippe Delage, Vice President Strategic Yield Improvement, Alstom Power, Switzerland
Power for the Changing WorldAnders Ahnger, Sales Director, Wärtsilä Finland Oy, Finland
the role of Power Plants With CCs in Future Power systems with Large shares of intermittent renewable Power sourcesAnne Sjoerd Brouwer, PhD Candidate, Utrecht University, NetherlandsCo-Authors: André Faaij, Professor, Utrecht University, United Kingdom
Ad Seebregts, Energy Research Centre, Netherlands
Machteld Van den Broek, Netherlands
Panellists:Peter Radgen, Head of E.ON Innovation Center, E.ON Technology & Innovation, Germany
More panellists to be confirmed
TRACK 3: GAS FIRED POWER TECHNOLOGY
SESSION 1: LARGE GAS TURBINE TECHNOLOGY UPDATE Iroom: Lehar 314:00 – 15:30An OEM reporting session on the technology status of large GT’s
Chair: Eldred Clark, Engineering Manager, ACE European Group, United KingdomCo-Chair: Enrique Sanchez, Director of Operations for Spain and Portugal, Nooter/Eriksen Ltd., Spain
50hz F Class gas turbines Upgrades featuring 500 MW Flexible Combined CycleToshishige Ai, Gas Turbine Design Engineeer, Mitsubishi Heavy Industries, JapanCo-Authors: Carlos Koeneke, Vice President, Project Engineering & Quality Assurance, Mitsubishi Power System Americas, Inc., United States
Junichiro Masada, General Manager, Mitsubishi Heavy Industries,LTD., Japan
Satoshi Hada, Gas Turbine Design Deputy Manager, Mitsubishi Heavy Industries, Japan
Takashi Kishine, Manager, MHI, Japan
the sgt-8000h after 2 years of Commercial OperationArmin Staedtler, Head of 8000H R&D Management, Siemens AG, GermanyCo-Author: Willibald Fischer, Program Director 8000H, Siemens AG, Germany
Operational experience Update regarding the Latest gt26 UpgradeMark Stevens, Product Manager, Alstom, SwitzerlandCo-Authors: Frank Hummel, Program Manager, Alstom Ltd., Switzerland
Volker Eppler, Director R&D Programs, Alstom Ltd., Switzerland
Frank Hummel, Program Manager, Alstom Ltd., Switzerland
Flexefficiency 50 & 60 Combined Cycle Update –Validation & testingMarcus Scholz, Large 50Hz GT/CC Commercial Director, GE Energy, Spain
TUESDAY 4 JUNE
www.powergeneurope.com 11
TRACK 4: THERMAL & NUCLEAR POWER PLANTS
SESSION 1: LARGE ADVANCED POWER STATIONSroom: Lehar 414:00 – 15:30State of the art & technical improvements
Chair: Giampiero Valenti, Thermal Power Plant Development, Enel Produzione, ItalyCo-Chair: Frank Hoese, Head of Sales, Steam Power Plant Solutions, Siemens Energy, Germany
912 MW supercritical Boiler for the Next Coal Fired Plant generationHeinz Lorey, Director Sales & Tendering, Alstom Boiler Deutschland GmbH, GermanyKonrad Ebert, Project Manager RDK8, EnBW Kraftwerke AG, GermanyMichael Kübel, Project Manager Steam Generator, EnBW Kraftwerke AG, GermanyWolfang Michele, Project Director RDK8, Alstom Boiler Deutschland GmbH, Germany
Operational and Fuel Flexibility for Power Plants Firing Pulverized CoalRoland Jeschke, Field Data Validation, Hitachi Power Europe GmbH, GermanyCo-Author: Bernd Stoll, Deputy Station manager, GK Hannover GmbH, Enercity, Germany
NeXtgeNPOWer: taking UsC technology to the Next Level of 750ºCMartin de Jong, Senior Consultant, DNV KEMA, NetherlandsCo-Author: Arthur Stam, Senior Consultant, DNV KEMA, Netherlands
TRACK 5: ELECTRICAL & AUTOMATION FOR POWER GENERATION
SESSION 1: COMBUSTION OPTIMIzATIONroom: stolz 116:00 – 17:30New developments in combustion optimization for boilers
Chair: Jari Leppäkoski, Business Manager, Performance Solutions, Metso Automation Oy, FinlandCo-Chair: Stefania Mascheroni, Communications Manager for BU Power Generation, ABB, Italy
reducing CO2/MWhr from existing Coal Fired Plants through real-time Combustion OptimizationScott Affelt, Vice President, Sales & Marketing, Zolo Technologies, United States
high temperature Corrosion Controlling by Online Fuel and Process atmosphere Management solutionJaani Silvennoinen, Product Manager, Metso Power, FinlandCo-Authors: Lasse Kauppinen, Product Manager, Metso Automatin Inc., Finland
Maria Nurmoranta, Development Manager, Metso Automation Inc., Finland
real-time Combustion Optimization and advanced Measurement technologies – synergizing two Different approachesFrancesco Turoni, Engineer, EUtech Scientific Engineering GmbH, GermanyCo-Authors: Robert Dalitz, EUtech, GermanyMichael Schnieder, EUtech, Germany
One approach to Combustion Control in thermal-Power Plant BoilersVladimir Stevanovic, Professor, Faculty of Mechanical Eng., University of Belgrade, SerbiaCo-Authors: Zeljko Djurovic, Professor, School of Elect. Eng., Univesity of Belgrade, Serbia
Miroslav Jakovljevic, I & C Plant Lead Engineer, Thermal Power Plants TENT, Serbia
Goran Kvascev, Assistant professor, School of Elec. Eng., University of Belgrade, Serbia
improving gas turbine performance and environmental impactChair: Graham Fagence, Business Development, Hitachi Power Europe, United KingdomCo-Chair: Andras Baczoni, Development Manager for Power Industry, Nalco Company, Hungary
automated Combustion tuning and Power Optimization for e/F-Class Dry Low NOx (DLN) gas turbinesHany Rizkalla, Manager - Combustion Engineering, Power Systems Mfg, LLC - An Alstom Company, United StatesCo-Author:Peter Stuttaford, Director Combustion Engineering, Power Systems Manufacturing, United States
evaluation and Planning Process for DLN Upgrade of gas turbine Combustion systemsMike Gabriel, Modifications and Upgrades Product Manager, Wood Group GTS, United States
effective NOx reduction retrofits for ieD Compliance of Older gas turbines with added Benefits of Fuel Cost reduction and Maintenance Cost reductionSjirk van der Goot, Marketing & Communications Manager, VBR Turbine Partners, Netherlands
SESSION 1B: PLANT OPTIMIzATION & MONITORING Iroom: schubert 3, first floor14:00 – 15:30Monitoring and optimization tools for coal/lignite fired plant
Chair: Enzo Tortello, Electrical Engineer - Senior Consultant, Ansaldo Energia, ItalyCo-Chair: Wilhelm Kleffner, Head of Power Plant - Leading Plant Manager, E.ON Generation Germany, Germany
Condition Monitoring of Boiler, Burner, Mill and Co.Liisa Clemens, Project Management R&D, Hitachi Power Europe GmbH, Germany
Pluri-Dimensional Matrices applied to the Power Plant alarm systemsFabio Piccardo, Member of Plant Automation Engineering, Ansaldo Energia, ItalyCo-Author: Carlo Bima, Head Steam Turbine Automation Engineering, Ansaldo Energia, Italy
JOINT INTEGRATION TRACK
SESSION 1: SMART GRID APPLICATIONSroom: schubert 6, First Floor14:00 – 15:30Hailed as the next generation of transmission and distribution technology, smart grid offers perhaps the best solution to the load management issue as it relates to variable output renewable energy. Attendees at this session have the chance to gain an essential understanding of the fundamental role these technologies will play in the European energy mix
Chair: Lise Nielson, Independent Consultant, Linie Probruger Radgivning, Denmark
Micro-ChP Units Meeting tomorrow’s Power/heat Demands and improving integration of renewablesJan de Wit, Business Area Manager, Cogeneration, Danish Gas Technology Centre, DenmarkCo-Authors: Jens Jakobsen, Project Manager, SEAS-NVE, DenmarkKristina F .Juelsgaard, Development Manager, SEAS-NVE, DenmarkMorten L. Karlsen, R&D Manager, Dantherm Power A/S, DenmarkLaila G. Madsen, Director of Science and Technology, IRD Fuel Cell Technology, DenmarkMads Møller Melchiors, Project Manager R&D, Dantherm Power A/S, DenmarkAksel Hauge Pedersen, Senior Consultant, DONG Energy A/S, Denmark
smart grid technology should be ‘interoperable by Design’Frank Hyldmar, Executive Vice President, Elster, Germany
smart grid solutions: a Wide range of real applications Proposed by eei to support the grid QualityG.Antonio Signori, New Project Manager, Equipaggiamenti Elettronici Industriali, Italy
the Challenges of Building a Modern smart grid in a Complex, Diverse and aging Utility industryRolf Adam, Director Business Development, Utilities & Smart Grid Europe, Cisco, Germany
15:30 – 16:00 DeLegate COFFee BreaK
TRACK 1: STRATEGIES FOR THE EUROPEAN POWER SECTOR
SESSION 2: EU MARKETS & TRENDSroom: Lehar 116:00 – 17:30This session looks at the current market structure for generation plant and then looks to the future development bringing into play a spectrum of possible solutions including as a framework for the future development with discussions as diverse as the European supergrid, methods of energy storage and auto generation
Chair: Peter Ramm, Chief Operating Officer, Advanced Power AG, United KingdomCo-Chair: Niels Bergh-Hansen, Executive Vice President, DONG Energy A/S, Denmark
the New energy Market - an advantage of Location for europe’s industryFrank Schillig, Managing Director, KWA Eviva GmbH, Germany
the european supergrid - Messiah or Pariah?Chris Mckinstray, Consultant, Arup, United KingdomCo-Author: Azad Camyab, Associate, University of Cambridge, United Kingdom
Development of energy storage technologies as Key element in the energy turnaroundDirk Briese, Managing Director, Trend Research, Germany
the Competiveness of Distributed generation for self-Consumption – Present situation and Outlook in the Context of the german energy transitionJochen Hauff, Global Sustainability Program Manager, A.T. Kearney, GermanyCo-Author: Wolfram Krause, Consultant, A.T. Kearney, Germany
TRACK 2: ROAD TO DECARBONIzATION - CCS, ENERGY EFFICIENCY & CHP
SESSION 2: COST & ECONOMICS OF CCSroom: Lehar 216:00 – 17:30Updating cost competitive positioning of technologies to support project development and business model for CO2 use
Chair: Philippe Delage, Vice President Strategic Yield Improvement, Alstom Power, SwitzerlandCo-Chair: Bernt Frydenberg, Advisor – CDM Strategy, Mercapto Consult, Denmark
technical Challenges and Cost reduction Potential for Post-Combustion Carbon CaptureGernot Schneider, Director Marketing and Sales CCS, Siemens AG, GermanyCo-Author: Ruediger Schneider, Germany
the Cost Competitiveness of Coal and gas Combined Cycle Power Plants equipped with CCsBenedicte Prodhomme, Product Manager CCS, Alstom, FranceCo-Author: Jean-Francois Leandri, Marketing Director CO2 Capture Systems, Alstom, France
TUESDAY 4 JUNE
www.powergeneurope.com 13
Utilization of CO2 separation technologies for Lignite-Fired Power PlantTomas Dupal, Unconventional and renewable energy specialist, UJV Rez, a.s., Czech RepublicCo-Authors: Pavel Slouka, Chief Designer, UJV Rez, a.s., Czech RepublicTomas Dlouhy, Senior Lecturer, Czech Technical University, Czech RepublicLukas Pilar, Chief designer, UJV Rez, a.s., United Kingdom
TRACK 3: GAS FIRED POWER TECHNOLOGY
SESSION 2: LARGE GAS TURBINE TECHNOLOGY UPDATE IIroom: Lehar 316:00 – 17:30An OEM reporting session on the technology status of large GT’s continued
Chair: Terry Raddings, Thermal Applications Engineering - Manager, GE Energy, United KingdomCo-Chair: Martin Grosshauser, Head of Marketing, Products & Solutions, Siemens, Germany
experience of New h-80 gas turbineHidetaro Murata, Gas Turbine Design and Service Dept, Hitachi Power Europe GmbH, GermanyCo-Author: Juergen Klebes, Head of Thermal Design Calculation, Hitachi Power Europe GmbH, Germany
heavy Duty gas turbine: Flexibility solutions and Upgrade roadmapLuca Buzzoni, GT Senior Engineer, Ansaldo Energia, ItalyCo-Authors: Federico Bonzani, Head of Turbomachinery, Ansaldo Energia, ItalyRoberto Polledro, Ansaldo, Italy
Paolo Traverso, R&D Project Manager, Ansaldo Energia, Italy
Operational experience of Mitsubishi M501J gas turbineCarlos Koeneke, Vice President, Project Engineering & Quality Assurance, Mitsubishi Power System Americas, Inc., United StatesCo-Authors: Satoshi Hada, Gas Turbine Design Deputy Manager, Mitsubishi Heavy Industries, JapanTakashi Kishine, Manager, MHI, JapanJunichiro Masada, General Manager, Mitsubishi Heavy Industries,LTD., JapanSusumu Wakazono, Gas Turbine Design Engineer, Mitsubishi Heavy Industries, Japan
TRACK 4: THERMAL & NUCLEAR POWER PLANTS
SESSION 2: LARGE STEAM TURBINES: OPERATIONAL ExPERIENCE & NEW CHALLENGESroom: Lehar 416:00 – 17:30The design and construction improvements of large Steam Turbines are becoming very important to face the future of Power Generation Plants
Chair: Giorgio Dodero, Chairman, IPG Industrial Project Group Srl, ItalyCo-Chair: Frank-Peter Kirschning, Power Station Manager, EnBW Kraftwerke AG, Germany
techno-economical Optimization strategies for steam Power Plants in Future Market ConditionsUlrich Rueth, Head of Marketing Steam Turbine Generator Sets, Siemens AG Energy Sector, GermanyCo-Authors: Alexander Tremmel, Head of Plant Product Line Marketing and Plant Concepts, Siemens AG Energy Sector, Germany
Michael Wechsung, Product Manager, Energy Solutions, Siemens AG Energy Sector, Germany
First application of the Newly Designed 48” LsBFederico Daccà, Leader of Turbine aerodynamics and CFD Engineer Te, Ansaldo Energia, ItalyCo-Authors: Stafano Cecchi, Aerodynamics Chief engineer, Ansaldo Energia, ItalyLuciano Cozza, Steam Turbine Engineering Manager, Ansaldo Energia, ItalyMauro Maccio, Mecanical Chief Engineer, Ansaldo Energia, Italy
Latest Developments of Cast Materials and Welding Consumables for Coal Fired steam turbines Components/Nickel-base alloy a625 and CB2 steel for the a-UsC technologyClaus Lochbichler, Voestalpine, AustriaCo-Authors: Edina Schmidtne Kelity, Voestalpine, AustriaSusanne Baumgartner, Voestalpine, Austria
ge enhanced heat technology grand D series steam turbines for Combined CycleRepresentative from GE
TRACK 5: ELECTRICAL & AUTOMATION FOR POWER GENERATION
SESSION 2: TURBO MACHINERY CONTROLroom: stolz 116:00 – 17:30Advanced control solutions for turbo machinery and grid stability
Chair: Gerhard Brandt, Head of Marketing and Communication, ABB AG, GermanyCo-Chair: Mike van der Jagt, Director Strategic Sales, Woodward Nederland BV, Netherlands
innovative automation technology for gas and steam turbine Control to Optimize Plant Performance and grant great FlexibilityMario Barisione, Head of Engineering Control Systems for Gas Turbin, Ansaldo Energia, ItalyCo-Author: Giuseppe Ferrari, Head Engineering, ABB, Italy
grid stability - gas turbines for Primary reserveJames DiCampli, LM6000 Technology Manager, GE, United States
anti surge Control on gas Compression systemsTom Bäckman, Product Manager, Metso Automation, FinlandCo-Author: Johan Musch, Gas Turbine Specialist, Metso Automation, Finland
Combined-Cycle Power Plant trinidad generation Unlimited (tgU) total Mark Vie integration into Centum DCs via Unified Operator interface (UOi) for a 765 MW CCPPAlwin Beck, Project Manager, Yokogawa Deutschland GmbH, Germany
shield for accelerated Boiler service (saBs)Christian Unger, Head of Service, Hitachi Power Europe GmbH, GermanyCo-Authors: Thomas Hannes Furth, Project Manager, Hitachi Power Europe GmbH, GermanyAxel Pauly, Technical Project Manager, Hitachi Power Europe GmbH, Germany
time is Money - advantages of implementing Laser technologyStanislaw Mendel, Service Sales Manager, Pruftechnik-Wibrem Sp. z o.o., Poland
JOINT INTEGRATION TRACK
SESSION 2: FLExIBLE THERMAL SOLUTIONSroom: schubert 6, First Floor16:00 – 17:30Many argue that fossil fuel-fired thermal power plants present an economically attractive and relatively low-carbon solution to the variability conundrum. Typically featuring gas turbines or reciprocating engines and capable of efficiently ramping up power or maintaining spinning reserve as required, such installations are tipped for accelerated investment. This session outlines a number of strategic, operational and technology-led business models centered on flexible thermal solutions.
Chair: Anne Marie Hey, Managing Director, Dutch Gas Turbine Association VGT, Netherlands
economic Design Considerations of hybrid Power Plants to Compliment Variable generationBart Stoffer, Director, GE Energy, NetherlandsCo-Author: Bulent Mehmetli, Regional Marketing Manager, GE Aeroderivative Gas Turbines, Turkey
Flexible-Dynamic Plants secure transmission NetworksJacques Mercier, R&D Programs Manager, Alstom Thermal Power, FranceCo-Author: Frank Kluger, Head of Department, Alstom Power Systems GmbH, Germany
CNg storage & transportation by sea for energy Demand Peak shaving: the gresik/Lombok Pilot ProjectRoberto Longo, Project Engineer, RINA Services S.p.A., ItalyCo-Authors: Suryadi Mardjoeki, Head of Oil & Gas Fuel Division, PLN - Indonesia Electricity State Company, IndonesiaArus Sidanta, Energy Hub Business Manager, RINA Indonesia, Indonesia
Comparing the effect of heat storage for a gas turbine-Based ChP Plant and a ChP Plant Using Large gas enginesPeter Pechtl, Managing Director, VTU Energy GmbH, AustriaCo-Author: Josef Petek, Authorized Officer, VTU Energy GmbH, Austria
17:00 – 18:30 OPeNiNg reCePtiON
TUESDAY 4 JUNE
www.powergeneurope.com 15
TRACK 1: STRATEGIES FOR THE EUROPEAN POWER SECTOR
SESSION 3: COUNTRY SPOTLIGHTSroom: Lehar 109:00 – 10:30This session presents studies and analysis on selected European power markets where there is notable activity or reform in prospect
Chair: Jacob Klimstra, Consultant, Jacob Klimstra Consultancy, NetherlandsCo-Chair: Nigel Blackaby, Conference Director, PennWell, United Kingdom
UK Country spotlightAngela Knight, Chief Executive Officer, Energy UK, United Kingdom
Macro-economic assessment of Power generation technologies Under the Latest Market Conditions: a Case study of the Power Market of turkeyTamer Turna, Chief Executive Officer, Yidirim Energy Investments Inc., Turkey
Further presentations to be confirmed
TRACK 2: ROAD TO DECARBONIzATION - CCS, ENERGY EFFICIENCY & CHP
SESSION 3: CHP: DEALMAKER FOR INVESTMENTS?room: Lehar 209:00 – 10:30This session will show large scale CHP projects realised under the challenging conditions of today’s power market
Chair: Matthias Zelinger, Secretary General, EUTurbines, GermanyCo-Chair: Pascal Stijns, Power & Energy Marketing Europe, Honeywell, Belgium
how to run a Complex ChP in the Most Optimum WayJoão André Coelho, Advanced Control & Systems Coordinator, Repsol Polímeros SA, Portugal
Lausward Block F: the First ChP to extract 300 MWth of District heat from a single Power Plant Unit in Combined Cycle OperationMichael Baum, Sales Manager, Siemens AG Energy Sector, GermanyCo-Author: Kais Sfar, Product Line Manager, Siemens AG Energy Sector, Germany
District heating with the Flexibility of the Ka26 Combined Cycle Power PlantChristian Bohtz, Product Manager Gas Power Plant Applications, Alstom, SwitzerlandCo-Author: Paul Drouvot, Process Design Engineer, Alstom, Switzerland
TRACK 3: GAS FIRED POWER TECHNOLOGY
SESSION 3: CCGT OPERATING ExPERIENCEroom: Lehar 309:00 – 10:30Power plant project development, construction and operating experiences from latest CCGT and ISCC projects
Chair: Risto Paldanius, Director, Business Development, Wärtsilä Corporation, Power Plants, FinlandCo-Chair: Jose Maria Bronte Malo, Director General, Bahia de Bizkaia Electricidad,S.L., Spain
rWe’s and turcas New 775 MW Denizli (turkey) Combined Cycle PlantRalf Bielack, Project Manager, RWE, GermanyCo-Author: Arkin Akbay, Electric and Gas Group Director, Turcas, Turkey
experience report from Powerpoint to Powerplant OMV Power international gmbh’s experience in Building 1.7 gW in CCPP PlantsMarc Smith, Head of CCPP Projects & Engineering, OMV Power International GmbH, AustriaCo-Authors: Miroslav Kovacik, Head of O&M, OMV Power International GmbH, AustriaDieter Krapp, Senior Vice President, Power, OMV Power International GmbH, Austria
Flexible Back-Up Capacity to Meet Balancing requirements due to res PenetrationPablo Arguelles, Director Technical & Economical Regulatory Issues, Hc Energia, Spain
integrated solar Combined Cycles (isCC) to Meet renewable targets and reduce CO2 emissionsEnrico Conte, R&D Program Manager, Alstom, SwitzerlandCo-Author:Christian Bohtz, Product Manager Gas Power Plant Applications, Alstom, SwitzerlandAndreas Boegli, Director Product & Strategy Solar, Alstom, SwitzerlandMarco Pattacini, Program Manager, Alstom, Switzerland
TRACK 4: THERMAL & NUCLEAR POWER PLANTS
SESSION 3A: CIRCULATING FLUIDIzED BED BOILERSroom: Lehar 409:00 – 10:30Experience with various fuel application within CFB plants
Chair: Kari Niemelä, Vice President Sales, Western Europe, Foster Wheeler Energia OY, FinlandCo-Chair: Klaus Schubert, Customer Management, Head of Sales Power Plants, Doosan Power Systems Europe, Germany
First Operating experiences of 205 MWe Polaniec CFB Boiler Firing 100% BiomassMarko Natunen, Project Manager, Foster Wheeler Energia Oy, FinlandCo-Author: Timo Jäntti, Director, Conceptual Engineering, Foster Wheeler, Finland
CFB technologies for Combustion of Difficult FuelsHans Piechura, Producr Manager, Doosan Lentjes GmbH, Germany
WEDNESDAY 5 JUNE
POWER-GEN EUROPECONFERENCE PROGRAMME
16 www.powergeneurope.com
Why CFB is the right answer for Maximized renewable Fuel UtilizationAri Kokko, Director CFB business, Metso Power, FinlandCo-Author: Tero Luomaharju, Product Manager, Metso Power Oy, Finland
SESSION 3B: NUCLEAR TECHNOLOGY & SAFETYroom: schubert 3, First Floor09:00 – 10:30Current activity development in nuclear technology & safety
Chair:*Ulla Pettersson, Director, E for Energy Management Consulting, Sweden
ansaldo Nucleare involvement in the iter Vacuum Vessel ProjectMonica Frogheri, Safety Advisor, Ansaldo Nucleare, Italy
Plant safety after Fukushima: From safety alliance to Long - term OperationJean-Marie Letourneux, VP Safety Alliance, Areva, France
safety goals for Nuclear installations – a status OverviewMichael Knochenbauer, Vice President, R&D Director, Scandpower, Sweden
the Benefits of harmonising Nuclear regulations across europeAujas Mistry, Nuclear New Build Project Engineer, Nuvia Ltd, United Kingdom
TRACK 5: ELECTRICAL & AUTOMATION FOR POWER GENERATION
SESSION 3: FIELD TECHNOLOGYroom: stolz 109:00 – 10:30Presentations showing field technologies for measurement and solutions, such as Electro Hydrostatic Actuation technology in comparison to other technologies; key issues for GT hot gas path tip clearance measurement; SO3/H2SO4 CEM in an coal fired power plant; and last but not least efficiency improvements for the grinding process of ball mills to reduce unburned carbon.
Chair: Mike Ferris, Business Unit Manager - Western Europe, Emerson Process Management, United Kingdom
Co-Chair: Christian Plomer, GM COE Power & Energy, Yokogawa GesmbH Central East Europe, Austria
electro hydrostatic actuation for gas and steam turbine Process ValvesAchim Helbig, Innovation Projects Manager, Moog GmbH, GermanyCo-Authors: Andreas Noll, Business Development Manager PowerGen, Moog GmbH, Germany
innovative technologies for gt hot gas Path tip Clearance MeasurementEnrico Pignone, R&D Program Manager, Ansaldo Energia, ItalyCo-Authors: Andrea Randazzo, Università di Genova, ItalyPaolo Verrecchia, Ansaldo Energia, Italy
sO3 CeMs in Coal Fired Power PlantsDeborah Padwater, Strategic Industry Manager, SICK AG, Germany
reduced Unburnt Carbon thanks to homogenous Fuel smartFill - a Fail-safe, high-Precision Fill-Level and temperature Measurement systemPeter Kalkert, Managing Director, KIMA Echtzeitsysteme GmbH, Germany
SESSION 3: O&M MANAGEMENTroom: stolz 209:00 – 10:30How to improve the technical and economical management of the power plants
Chair: Andreas Feldmueller, Head of Integrated Plant Solutions, Siemens Energy, GermanyCo-Chair: Pier Guiseppe Bottini, New Build Development Manager, Enipower S.p.A., Italy
increasing Profitability of Fossil Production in today’s Versatile Market situation by Utilising energy Management systemsTomi Dewes, General Manager, Fortum Power and Heat Oy, Finland
Optimization investment on Water treatment is Just an expense or Opportunity to be sustainable and gain Profit?Orazio Illario, Power Industry Technical Consultant, Nalco Company, ItalyCo-Author: Andras Baczoni, Development Manager for Power Industry, Nalco Company, Hungary
training schools New role and New Didactics - the Case of ansaldo energiaRaffaele Traverso, Chief Engineer, Ansaldo Energia S.p.A., Italy
JOINT INTEGRATION TRACK
SESSION 3: HYDROPOWER STORAGEroom: schubert 6, First Floor09:00 - 10:30As the most successful energy storage option to date, European hydropower is benefitting from a surge in interest and investment. Delegates attending this session will learn how to maximise both the operational and economic benefits of these key energy assets
Chair: James Cronin, Principal Consultant, Cronin Energy Consulting, Ireland
Pumped storage Power in austria – experience, New Projects, economic situationManfred Malzer, Head of PS Division, ABB AG, AustriaCo-Authors: Josef Schernthanner, Head of Department for Electrical Eng. & CS, VERBUND Hydro Power AG, AustriaDietmar Wolf, Business Development Manager, ABB AG, Austria
WEDNESDAY 5 JUNE
www.powergeneurope.com 17*Invited/To be confirmed
Power Balancing in the grid - a Dynamic approach with a Pumped storage UnitJohann Hell, Senior Expert, Electrical Power Systems, Andritz Hydro, Austria Co-Authors: Markus Egretzberger,Andritz Hydro, AustriaAlois Lechner, Dr., Andritz Hydro, AustriaJohn Epps, Consultant, John A. Epps Consultancy, United Kingdom
Yves Vaillant, MSc, Andritz Hydro, Switzerland
title to be confirmed Olivier Teller, Product Director for Pumped Storage, Alstom Hydro, France
10:30 – 11:00 DeLegate COFFee BreaK
TRACK 1: STRATEGIES FOR THE EUROPEAN POWER SECTOR
SESSION 4: PERSPECTIVES ON CAPACITY MARKETSroom: Lehar 111:00 – 12:30Because the economic consequences of running out of electricity supply are considerable, capacity markets have been set up to ensure that supply will be available when it is needed most. These capacity markets provide an additional incentive for developers and owners of generating capacity. The session will include papers discussing technical, financial and market-relevant issues to find the best capacity market strategy
Chair: Norbert Dahlmann, Senior Manager, E.ON Anlagenservice, GermanyCo-Chair: Chris McGarvey, Legal Director, Pinsent Masons, United Kingdom
successful Capacity Markets strategies as Proven through the example of the Combined-Cycle gas turbine Power Plant (CCgt) Project in Landivisiau, Brittany region, FranceXavier Caitucoli, President and Chief Executive Officer, Direct Energy, FranceCo-Authors: Gerhard Brenner, Vice President Project Development, Siemens Project Ventures, GermanyHarald Huettmann, Head of Sales GT Power Plant Solutions SW-Europe, Siemens Energy, GermanyAndreas Maier, Sales Manager, Siemens AG Energy Sector, Germany
the Need for Capacity Payments for Flexible Back-Up CapacityPablo Arguelles, Director Technical & Economical Regulatory Issues, Hc Energia, Spain
Future Market Designs for reliable electricity systems in europeMatti Rautkivi, General Manager, Liaison office, Wärtsilä, Finland
TRACK 2: ROAD TO DECARBONIzATION - CCS ENERGY EFFICIENCY & CHP
SESSION 4: NEW CHP LOW EMISSION TECHNOLOGYroom: Lehar 211:00 – 12:30This session examines some technology options of low emission CHP
Chair: Adolfo Eric Labi, President, Megalia Foundation, ItalyCo-Chair: Giancarlo Benelli, Head of Technological Scouting, Enel Engineering and Research Division, Italy
Benefits of Distributed Power and CogenerationKlaus Payrhuber, Product Manager, GE Power & Water, AustriaCo-Author: Scott Nolen, Product Line Leader, GE Power & Water, Austria
energy-efficient Operation of a Biomass Fired ChP PlantRisto Eteläaho, Product Manager - BFB Boilers, Metso Power Oy, FinlandCo-Author: Daniel Jedfelt, Managing Director, Kalmar Energi Värme AB, Sweden
Power from residual heat through an advanced Organic rankine CycleJos van Buijtenen, Director & CTO, Tri-O-Gen B.V., Netherlands
Utilize Waste heat to Qualify for thermal heat incentives at Biogas PlantsRobert Emrich, Vice President, Sales, ElectraTherm, United States
TRACK 3: GAS FIRED POWER TECHNOLOGY
SESSION 4: GAS ENGINE TECHNOLOGYroom: Lehar 311:00 – 12:30An OEM update on gas engine technology and operating experience
Chair: Michael Fübi, Chief Executive Officer, RWE Technology GmbH, GermanyCo-Chair: Mark Stevens, Product Manager, Alstom, Switzerland
250 MW Largest Combustion engine Based emergency reserve Power Plant in europe, elering, tsO of estoniaIlo Toom, Project Manager, Elering UO, EstoniaCo-Author: Risto Paldanius, Director, Business Development, Wärtsilä Corporation, Power Plants, Finland
smart Cogeneration Plants with high efficient gas enginesMartin Schneider, Prodcut Line Manager, GE Jenbacher Gas Engines, Austria
Natural gas technologies in CompetitionJohannes Lauterbach, Product Manager, MAN Diesel & Turbo SE, GermanyCo-Author: Florian Schiller, Product Manager, MAN Diesel & Turbo SE, Germany
advanced spark ignition technology for gas-Fueled engines and its impacts on Combustion stability and Performance OptimizationJoseph M. Lepley, Vice President, Altronic LLC, United StatesCo-Author: Arno Gschirr, Product Manager, Hoerbiger Engine Solutions Europe, Austria
WEDNESDAY 5 JUNE
POWER-GEN EUROPECONFERENCE PROGRAMME
18 www.powergeneurope.com
TRACK 4: THERMAL & NUCLEAR POWER PLANTS
SESSION 4A: FUEL CONVERSION & RETROFIT BOILERSroom: Lehar 411:00 – 12:30Conversion experience with biomass and performance improvement
Chair: Ingo Weber, Head of Sales and Marketing, KAB TAKUMA, United StatesCo-Chair: Adrian Skea, Product Manager Steam Power Plants, Alstom Power, France
identification of the Potential and Bottlenecks for Biomass Co-Firing and Coal-to-Biomass Conversion at Large Power stationsJoop Witkamp, Senior Consultant, DNV KEMA, NetherlandsCo-Authors: Ton Konings, Senior Consultant, DNV KEMA, NetherlandsMarcel Cremers, Consultant, DNV KEMA, Netherlands
a Modern Firing system and retrofit of a t-type steam generatorStefan Hamel, Head of Thermal & Combustion Engineering Departmen, Babcock Borsig Steinmüller GmbH, GermanyCo-Authors:Bernhard Pinkert, Process Engineer, Babcock Borsig Steinmüller GmbH, Germany
Coal Plants generation Cost reduction, Post-Combustion of Combustion residues from Co-Firing of Biomass and rDF During Dry ash removalFulvio Bassetti, Technical Director, Magaldi Power S.p.A., ItalyCo-Authors: Guenter Baur, General Manager, Magaldi Power GmbH, GermanyDaniele Ricci, Project Leader, Magaldi Industrie S.r.l., ItalyOlaf Spindeldreher, Technische Planung, RWE Power Aktiengesellschaft, Germany
a Modern Firing system and retrofit of steam generator at BitolaChristian Storm, Head of Process Engineering Dep. & Research, Babcock Borsig Steinmüller GmbH, Germany
SESSION 4B: CURRENT NUCLEAR PROJECTSroom: schubert 3, First Floor11:00 – 12:30
Nuclear Power Generation country & project status update
Chair: Stefan Hatt, Group Vice President, ABB Ltd., Switzerland
the Deployment of hitachi aBWr reactors in the UK at horizon Nuclear Power and europe Christian Blessing, Sales Director, Europe Region, Nuclear Power Plant Sales, GE-Hitachi, Germany
the siemens approach to provide Conventional islands for Nuclear Power PlantsAlexey Reznichenko, Sales Manager, Siemens AG, Germany
Update on New Build in russiaJukka Laaksonen Vice President, Rusatom Overseas, Russia
Update on eDF’s New Build and implementation of the stress tests in UK and France*Representative from EDF
TRACK 5: ELECTRICAL & AUTOMATION FOR POWER GENERATION
SESSION 4: DISTRIBUTED CONTROL SYSTEMSroom: stolz 111:00 – 12:30A look at control systems to improve plant efficiency, security and environmental performance
Chair: Arthur Close, Sales Director, Black & Veatch Energy, United KingdomCo-Chair: Mike van der Jagt, Director Strategic Sales, Woodward Nederland BV, Netherlands
Fully integrated FgD Control and automation solution – turceni, romaniaChristian Plomer, General Manager - Power & Energy, Yokogawa GesmbH Central East Europe, AustriaCo-Author: Yoshio Fujino, Project Manager, Yokogawa Electric Corporation, Japan
increasing security in Power generation Plants: how can europe Learn from Us and Middle east Lessons?Marco Biancardi, Cyber Security Manager, ABB SpA, ItalyCo-Authors: Luca Cicognani, Sales Manager, ABB SpA, Italy
Stefano Doga, Sales Account, ABB SpA, Italy
ergonomic aspects in Construction and Operating Philosophy of a Peak Load Plants New Control roomWilhelm Kleffner, Head of Power Plant - Leading Plant Manager, E.ON Generation Germany, Germany
saving LimestoneJari Leppäkoski, Manager, Energy Efficiency, Metso Automation Oy, Finland
SESSION 4: FLExIBILITY & IMPROVEMENTS Iroom: stolz 211:00 – 12:30Tools and methods to increase flexibility and performance of existing power plants (CCGT)
Chair: Enrico Malusardi, Feasibility Studies and Special Projects Manager, EDISON SpA, ItalyCo-Chair: Andreas Feldmueller, Head of Integrated Plant Solutions, Siemens Energy, Germany
Flexibility improvement of steam turbines for Conventional and Combined Cycle Power PlantsKlaus Helbig, Manager: Lifetime CA &M ST, Alstom Power GmbH, GermanyCo-Authors: Christian Kuhne, Manager Mechanical Evaluation, Alstom Power, GermanyKai Fertig, TL Commissioning Steam Turbine, Alstom Power, Germany
WEDNESDAY 5 JUNE
www.powergeneurope.com 19
sgt5-4000F gas turbine and Combined Cycle Power Plant evolution reflecting the Changing Market requirementsEberhard Deuker, Combustion Engineer, Siemens AG Energy, GermanyCo-Authors: Mike Koenig, Manager, Siemens Energy Inc., United StatesMichael Moeller, Package Frame Owner, Siemens AG, GermanyJan Slad, Product Manager Gas Turbine, Siemens AG, GermanyHolger Streb, Manager, Siemens AG Energy, Germany
real-time and intraday Optimization of Multiple Power generation UnitsRüdiger Franke, Optimization Global Product Manager, ABB AG, GermanyCo-Author: Hansjürgen Schönung, ABB AG, Germany
JOINT INTEGRATION TRACK
SESSION 4: ENERGY STORAGE ALTERNATIVESroom: schubert 6, First Floor11:00 – 12:30Hydro undoubtedly holds the lead, but it is far from the only option when it comes to storing energy. This session presents insights into a number of alternative technologies which are rapidly gaining both market traction and economic credibility
Chair: Patrick Clerens, Secretary General, EASE - European Power Association for Storage of Energy, Belgium
a synthetic Closed Carbon Cycle energy system provides Massive, Long term, energy storage which supports Low Cost intermittent renewable sources and Large seasonal Power supply and Demand Variations.Nick Cook, Managing Director, ReSus Technology Ltd., United Kingdom
Power-to-gas the essential Link for a Cleaner energy FutureRaymond Schmid, Global Market Strategist at Hydrogenics, Belgium
the reality of Large-scale storage solutions in today’s and tomorrow’s Future european energy systemCeline Mahieux, Head of R&D Renewables, ABB, SwitzerlandCo-Author: Stefan Linder, Power Systems Business Development, ABB, Switzerland
Process engineering and thermodynamic evaluation of Concepts for Cryogenic energy storageBrian Stöver, Hitachi Power Europe GmbH, GermanyCo-Authors: Alexander Alekseev,Engineer, Linde AG, GermanySebastian Rehfeldt, Hitachi Power Europe GmbH, GermanyChristoph Stiller, Linde AG, Pullach, Germany
reserve Presentation:energy storage technology application for grid and Frequency Control-an ancilliary serviceDilip Joshi, Superintending Engineer, State Load Dispatch Center, India
12:30 – 14:00 DeLegate LUNCh
JOINT PLENARY PANEL DISCUSSION
LIBERALIzATION AND DECARBONIzATION: ROADMAP OR ROADBLOCK?room: strauss 2-314:00 – 15:30 Moderator: Stephen Sackur, International Journalist and TV Presenter, United KingdomInvited Panelists:Nikolaus Berlakovich, Minister, Federal Ministry of Agriculture, Forestry, Environment and Water Management, AustriaGiuseppe Zampini, Chief Executive Officer, Ansaldo Energia, Italy Susanna Zapreva, Chief Executive Officer, Wien Energie, Austria
15:30 – 16:00 DeLegate COFFee BreaK
TRACK 1: STRATEGIES FOR THE EUROPEAN POWER SECTOR
SESSION 5: COMMERCIAL & SOCIAL ASPECTS OF PROJECT DEVELOPMENTroom: Lehar 116:00 – 17:30Typically the development of projects focuses on the pure technical and financial aspects, but other key areas can have an equally significant impact if not considered correctly. The session will include papers discussing some of these other important areas and present strategies for integration into the project thus improving the odds of a successful project
Chair: Eric Adams, Client Engagement and Work Winning Director, Parsons Brinckerhoff, United KingdomCo-Chair: James Cronin, Principal Consultant, Cronin Energy Consulting, Ireland
Public Perception and PrBill Penn, Chairman and Founder, Aspectus PR, United Kingdom
aspects of ContractsChris McGarvey, Legal Director, Pinsent Masons, United Kingdom
how to add Value to your New Power Project through effective insurance/risk ManagementGareth Saunders, Executive Director, Willis, United Kingdom
TRACK 2: ROAD TO DECARBONIzATION - CCS, ENERGY EFFICIENCY & CHP
SESSION 5: DEVELOPMENT IN OxY-FUEL TECHNOLOGYroom: Lehar 216:00 – 17:30This session will provide an update on advanced oxy-combustion concepts
Chair: Christoph Blessing, Senior Engineer, EnBW Kraftwerke AG, GermanyCo-Chair: Matthias Zelinger, Secretary General, EUTurbines, Germany
Flameless Pressurized Oxy Coal Combustion technology: the Only Option for a Cost acceptable Power Production with Pure CO2 recoveryGiancarlo Benelli, Head of Technological Scouting- Research Area –Engineering and Innovation Division, Enel Produzione Spa, ItalyCo-Authors: Massimo Malavasi, Director of R&D & Process Technology, ITEA Spa, Italy
WEDNESDAY 5 JUNE
POWER-GEN EUROPECONFERENCE PROGRAMME
20 www.powergeneurope.com
Ncola Rossi, Head of Generation Systems, Diagn, ENEL Ingegneria e Ricerca, Italy
integrated approach of Oxy-CombustionBenedicte Prodhomme, Product Manager CCS, Alstom, FranceCo-Author: Olaf Stallmann, Technology Manager oxy-process, Alstom, Germany
integration of a Waste gasification Unit with a Power Plant to Mitigate PollutionAurelio Labanca, Equipment Engineer, Petrobras, Brazil
TRACK 3: GAS FIRED POWER TECHNOLOGY
SESSION 5: SMALL & MEDIUM SIzE GAS TURBINESroom: Lehar 316:00 – 17:30Small and medium size gas turbines are in high demand under variable renewable dispatch environments by quickly responding to rapid load changes
Chair: Carlos Koeneke, Vice President, Project Engineering & Quality Assurance, Mitsubishi Power System Americas, Inc., United StatesCo-Chair: Regine Mowill, Marketing Manager, OPRA Turbines B.V., Netherlands
siemens gas turbine sgt-800 enhanced to 50 MW: Design Modifications, Validation and Operation experienceMats Björkman, Product Manager, Siemens Industrial Turbomachinery, SwedenCo-Authors: Daniel Lörstad, Combustion Engineer, Siemens Industrial Turbomachinery, SwedenLieke Wang, Turbine Engineer, Siemens Industrial Turbomachinery, Sweden
Development and Commercial Operation review of highly efficient L30a gas turbineTakuya Ikeguchi, Assistant Manager, Kawasaki Heavy Industries, Ltd., JapanCo-Authors: Masanori Ryu, Kawasaki Heavy Industries, Ltd., United StatesRyoji Tamai, Kawasaki Heavy Industries, Ltd., United StatesRyozo Tanaka, Kawasaki Heavy Industries, Ltd., United States
Combined heat and Power – gas turbine Operational FlexibilityJames DiCampli, LM6000 Technology Manager, GE, United States
the Benefits of Flexible aero Derivative gas turbines in support of renewable generationNayan Gala, Strategic Marketing Manager, Rolls-Royce Energy, United Kingdom
TRACK 4: THERMAL & NUCLEAR POWER PLANTS
SESSION 5A: ADVANCED BOILER MATERIALSroom: Lehar 416:00 – 17:30T24 operational experience and new concepts
Chair: Piotr Karas, Marketing Director, RAFAKO S.A., PolandCo-Chair: Frank Hoese, Head of Sales, Steam Power Plant Solutions, Siemens Energy, Germany
alloy Concepts for Modern Creep strength enhanced Ferritic steels used in super and Ultra supercritical BoilersMahmud Jarrar, Manager, V&M Deutschland GmbH, GermanyCo-Author: Olivier Hamart, Engineer, Vallourec & Mannesmann Tubes, France
New steels Fulfill requirements for New high efficient Power Plants – Welding of t24, P92 and VM12-shCHerbert Dr.-Ing. Heuser, Global Segment Manager Thermal Power Plants, Boehler Schweisstechnik Deutschland GmbH, Germany
Modified Commissioning Procedure for UsC Boilers Using Material t24Jörg Böwe, Head of Engineering, Hitachi Power Europe GmbH, GermanyCo-Author: Martin Becker, Head of Engineering Pressure Parts, Hitachi Power Europe GmbH, Germany
improving Coal Fired Boiler technology to Meet renewables integrationGiorgio Dodero, Chairman, IPG Industrial Project Group Srl, Italy
SESSION 5B: ROLE OF NUCLEAR IN THE ENERGY MIx - PANEL DISCUSSIONroom: schubert 3, First Floor16:00 – 17:30Is there a role for low carbon baseload power? Overview of activity in nuclear market in Europe and worldwide
Chair: Rüdiger König, Head of International Nuclear Development, RWE Technology GmbH, Germany
introduction and overview of the challenges by the session Chairinvited Panelists:• Nigel Knee, Head of Nuclear Policy, EDF Energy, United Kingdom• Jukka Laaksonen Vice President, Rusatom Overseas, Russia• Jean-Pol Poncelet, Director General, FORATOM, Belgium• Representative from Eon• Representative from IAEA
TRACK 5: ELECTRICAL & AUTOMATION FOR POWER GENERATION
SESSION 5: FUNCTIONAL SAFETYroom: stolz 116:00 – 17:30Experiences and approaches to functional safety on turbine machinery equipment and power plants
Chair: Franco Rosatelli, Chief Executive Officer and Chair EUTurbines TC, Ansaldo Energia, ItalyCo-Chair: Jari Leppäkoski, Business Manager, Performance Solutions, Metso Automation Oy, Finland
improvement of Operational safety in Power Plants - how Plant Builders, equipment suppliers and Operators alike increase their Operational safety by Means of the Concept of Functional safetyGerold Klotz-Engmann, Head of Technical Safety, Endress+Hauser Messtechnik GmbH+Co. KG, GermanyGünter Dirding, Plant Design, E.ON New Build & Technology GmbH, Germany
WEDNESDAY 5 JUNE
www.powergeneurope.com 21
turbomachinery and generators – application of the Principles of Functional safety – Methods for Determination of the Necessary risk reduction Joint Presentation of VDMa specification 4315Andreas Belzner, Engine Functional Safety/Gas Turbine, Alstom AG, SwitzerlandCo-Authors: Josef Antretter, Functional Safety Manager, Siemens AG, GermanyWilfried Blotenberg, Excecutive Consulting Engineer, MAN Diesel & Turbo, GermanyMatthias Zelinger, Manager Thermal Turbines and Power Plants, VDMA, Germany
integrated Versus Dedicated safety systems for turbomachinery equipmentRich Kamphaus, Steam Turbine & Compressor Market Manager Woodward, Woodward inc., United States
SESSION 5: FLExIBILITY & IMPROVEMENTS IIroom: stolz 216:00 – 17:30Tools and methods to increase flexibility and performance of existing fossil power plants
Chair: Wilhelm Kleffner, Head of Power Plant - Leading Plant Manager, E.ON Generation Germany, GermanyCo-Chair: Stefan Ritzmann, Global Marketing & Communication Manager, ABB Power Generation Service, Switzerland
exploring Operational Flexibility and Versatility of Fossil Power generating assetsAlbert Bagaviev, Head of Computer Aided Service Technology, E.ON Anlagenservice GmbH, Germany
the World‘s Most Flexible Lignite Fueled Units - achieved by a DCs retrofitBernhard Meerbeck, Head of Product Management Process Optimization, Siemens AG, GermanyCo-Author: Annette Barenbruegge, Head of Process Optimization, Siemens AG, Germany
successful Comprehensive rehabilitation of elder Lignite Operated Boilers in the Balkan areaChristian Kissling, Sales Manager, HItachi Power Europe GmbH, GermanyCo-Author: Alfons Leisse, Manager, Hitachi Power Europe, Germany
JOINT INTEGRATION TRACK
SESSION 5: MANAGING DISTRIBUTED GENERATIONroom: schubert 6, First Floor16:00 - 17:30As utility portfolios gather greater volumes of distributed and variable output renewable energy assets, they are faced with considerable operational challenges in maintaining grid stability. Attendees at this session have an opportunity to gain knowledge of the latest generation of grid management tools
Chair: Jacob Klimstra, Consultant, Jacob Klimstra Consultancy, Netherlands
Different Predictive Control strategies for active Load Management in Distributed Power systems with high Penetration of renewable energy sourcesYi Zong, Senior Scientist, DTU Elektro, Denmark
electricity Network Balancing for renewable energy integration with a hybrid generating system including a synchronous CondenserMats Östman, Senior Development Manager, Electrical & Automation, Wärtsilä Finland Oy, FinlandCo-Authors: Reijo Leikas, Senior Development Manager Power Plant Technology, Wärtsilä Finland Oy, FinlandAntti Ouni, Senior Development Manager Power Plant Technology, Wärtsilä Finland Oy, FinlandNiklas Wagar, General Manager Electrical & Automation Power Plant Technology, Wärtsilä Finland Oy, Finland
Managing Decentralized Power generation by intelligent Fleet Control solutionsLeif Wiebking, Chief Technical Officer - Instrumentation, Controls & Electrical, Siemens AG, Germany
17:00 – 19:30 NetWOrKiNg reCePtiON
WEDNESDAY 5 JUNE
POWER-GEN EUROPECONFERENCE PROGRAMME
22 www.powergeneurope.com
TRACK 1: STRATEGIES FOR THE EUROPEAN POWER SECTOR
SESSION 6: POWER INDUSTRY ExPERIENCES IN CENTRAL & EASTERN EUROPEroom: Lehar 109:00 – 10:30The session will focus on the current situation of the power industry in Central Europe and South-Eastern Europe
Chair: Andrzej Kowalski, President of the Board, Energoprojekt Katowice SA, PolandCo-Chair: Dick Van Der Vecht, Manager Competence Center Equipment, Electrabel Nederland, Netherlands
analysis of energy Facilities Construction activity in south eastern europeanton Milto, executive Director, COtes, russian FederationCo-Author: Dmitry Serant, General Director/Chief Executive Officer, COTES, Russian Federation
renewal of Power Capacity in Poland in View of Poland’s Political and economic Dilemmas and global economyKrzysztof Musial, Project Manager, Energoprojekt - Katowice, PolandCo-Author: Andrzej Kowalski, President of the Board, Energoprojekt Katowice SA, Poland
trends in the energy Community see 2008-2011David Zarkovic, Head of Electricity Trade Division, PE Electric Power Industry Of Serbia, SerbiaCo-Authors: Mihailo Mihailovic, Head Of Strategy Planning Division, PE Electric Power Industry Of Serbia, SerbiaMijat Milosevic, Sector Manager, PE Electric Power Industry Of Serbia, SerbiaDragan Vlaisavljevic, Department Manager, PE Electric Power Industry Of Serbia, Serbia
TRACK 2: ROAD TO DECARBONIzATION - CCS, ENERGY EFFICIENCY & CHP
SESSION 6: ABSORPTION PROCESSES FOR CO2 SEPARATIONroom: Lehar 209:00 – 10:30The session is focused on the CO2 absorption processes, lab and pilot scale tests and their performance
Chair: Giancarlo Benelli, Head of Technological Scouting, Enel Engineering and Research Division, ItalyCo-Chair: Adolfo Eric Labi, President, Megalia Foundation, Italy
Comparison of Different CO2 absorption Liquids in a high sophisticated test FacilityMartin Koller, Project Manager R&D, Andritz AG, AustriaCo-Authors: Günter Gronald, Head of R&D/CFD, Andritz AG, AustriaGerald Kinger, EVN AG, Austria
solid sorbents Versus aqueous amine solutions for Post-Combustion CO2 Capture at Pulverized Coal Fired and NgCC-Based Power PlantsBert Heesink, Managing Principal Clean Fossil Power, DNV KEMA, Netherlands
solid sorbents as a retrofit CO2 Capture technology: Update on 1 MWe Pilot ProgressSharon Sjostrom, Chief Technology Officer, ADA Environmental Solutions, Inc., United StatesCo-Author: Holly Krutka, ADA Environmental Solutions, Inc., United States
TRACK 3: GAS FIRED POWER TECHNOLOGY
SESSION 6: HRSG TECHNOLOGY AND AIR FILTRATIONroom: Lehar 309:00 – 10:30This session will present responses of equipment manufacturers (HRSG , Air pollution Control Systems , Air intake filtration) to market demands in terms of highest performances
Chair: Jean-Pierre Goffin, Mechanics & Civil Works Competence Center Manager, Tractebel Engineering, BelgiumCo-Chair: Mark Stevens, Product Manager, Alstom, Switzerland
advanced gas turbine Combined Cycle Plant - hrsg Design Concerns for Mechanical integrity and Multiple Fuel UseAkber Pasha, Technical Director, Vogt Power International, United States
ansaldo Caldaie experience in heavy Cycling hrsg Design and Operation
Guido Volpi Ghirardini, System Design and Product Development Manager, Ansaldo Caldaie SpA, ItalyCo-Authors: Giuseppe Silva, Mechanical Engineering Manager, Ansaldo Caldaie SpA, ItalyPaolo Trivellato, HRSG System Design Engineer, Ansaldo Caldaie S.p.A., Italy
CCPP, Power generation with highest Overall efficiency at Lowest emissions LimitsJohannes Lind, Proposal Manager, Andritz, AustriaCo-Authors: Christian Brunner, Senior Engineer Process Technology, Andritz, AustriaChristian Fauland, Verbund Thermal Power GmbH & Co KG, Austria
Modern approach to gas turbine air/Water intake FiltrationGianluca de Arcangelis, Director, TT (Europe) Ltd, United Kingdom
reserve Presentation: relation Between Performance Measurement Uncertainties and hrsg thermal sizingNicolas Balczunas, Deputy Design Manager, CMI Energy, BelgiumCo-Authors: Jean-François Galopin, Director of Technology, CMI energy, Belgium
TRACK 4: THERMAL & NUCLEAR POWER PLANTS
SESSION 6: AIR POLLUTION CONTROLroom: Lehar 409:00 – 10:30Latest developments of DESOx and DENOx technology
Chair: Matti Rautanen, Manager - Research and Development, Metso Power Oy, FinlandCo-Chair: Piotr Karas, Marketing Director, RAFAKO S.A., Poland
THURSDAY 6 JUNE
www.powergeneurope.com 23
Operating experience of Circulating Fluidized Bed scrubbing technology in Utility size Power PlantsTobias Bönsel, Manager, Commercial, Foster Wheeler Graf Wulff GmbH, GermanyCo-Author: Rolf Graf, Scrubber Technology and Marketing, Foster Wheeler Graf Wulff GmBH, Germany
evaluation and Optimization of FgD Design Criteria in a Lignite Fuel Power PlantRalf Thomsen, Project Manager, Hamon Enviroserv GmbH, Germany
sNCr Process for Coal fired Boilers - experiences and Potential for the FutureBernd von der Heide, Managing Director, Mehldau & Steinfath Umwelttechnik GmbH, Germany
advanced selective Catalytic reduction (asCr) technology - a Lower Capital Cost solution for NOx reductionVolker Rummenhohl, Vice President, Catalyst Technology, Fuel Tech, United StatesCo-Authors: Pierangelo Ponzoni, Managing Director, Fuel Tech s.r.l., ItalyDavid Capozella, Director Catalyst Technologies, Fuel Tech, Inc., United States
TRACK 5: ELECTRICAL & AUTOMATION FOR POWER GENERATION
SESSION 6: GENERATORSroom: stolz 109:00 – 10:30Impact of auxiliaries on generator and network behaviour and operation
Chair: To be ConfirmedCo-Chair: Irina Kadykova, Conference & Exhibition Manager, Power Machines, JSC, Russia
experience on Modernization of hydro generators Different typesZ. Kuchinskaya, Department of Hydro Generators Design, Power Machines, Russian Federation
Mechanical and electrical rebuilding of a turbo generator for Phase-shift OperationDetlef Frerichs, Generator Modernization Manager, Siemens AG, GermanyCo-Authors: Anastassios Dimitriadis, Marketing Manager Generator Modernization, Siemens AG, GermanyMaren Wiese, Product Manager Generator Service, Siemens AG, Germany
Low-speed synchronous generators With an Output Capacity From 10 MW to 60 MW for Diesel electric Power stationsIvan Zheleznyak, Principal Engineer, Power Machines, OJSC, Russian Federation
testing stator Cores of turbo generators Using the ring Flux MethodClaus-Georg Richter, Head Generator Service Engineering (W-Region), Siemens AG, Germany
SESSION 6: LIFETIME OPTIMIzATION: OFFLINE DIAGNOSTICSroom: stolz 209:00 – 10:30Tools for the diagnostics and optimization of power plants during the lifetime
Chair: Sjirk van der Goot, Marketing & Communications Manager, VBR Turbine Partners, The NetherlandsCo-Chair: Enrico Malusardi, Senior Consultant, Edison SpA, Italy
a Method for a reliable Prediction of heavy Duty gas turbines Performance Degradation due to Compressor aging employing Field test DataAndrea Silingardi, R&D Compressor and Performance Engineer, Ansaldo Energia, ItalyCo-Authors: Pio Astrua, R&D Engineer, Ansaldo Energia s.p.a., ItalyStefano Piola, R&D Engineer, Ansaldo Energia s.p.a., ItalyIrene Ventrucci, Ansaldo Energia s.p.a., Italy
advanced Monitoring and Diagnostic systems For industrial gas turbinesJonathan Aylett, Senior Diagnostic Systems Engineer, Turbine Services Limited, United Kingdom
Large steam Drum inspections: 35 years of rBi experienceJan Willem Noteboom, Senior Consultant, DNV KEMA, Netherlands
JOINT INTEGRATION TRACK
SESSION 6: THE CHALLENGE OF INTERMITTENT GENERATIONroom: schubert 6, First Floor09:00 - 10:30Featuring case studies, novel technologies and operational analyses, this session will cover a great deal of ground. Ultimately, it is set to deliver a solid understanding of the key considerations when choosing the right technology investment in a world increasingly dominated by renewable energy
Chair: John Epps, Consultant, John A. Epps Consulting, United Kingdom
Overcoming grid stability Difficulties when integrating solar PV into Microgrids by Using Distributed Control and a Flywheel – the Marble Bar ProjectMartin Baart, Business Development Manager, ABB AG, Germany
increasing Photovoltaic: study about Weaknesses and Challenges of a Peak Load Plant in south germanyWilhelm Kleffner, Head of Power Plant - Leading Plant Manager, E.ON Generation Germany, Germany
energy storage for Distribution Power Quality and integration of renewablesJos Burgt, Consultant, KEMA, Netherlands
technical, regulatory and Financial Challenges in Providing reserve and Other “energy Demand reduction” initiatives in the UKAzad Camyab, Chief Executive Officer, STOR Generation Ltd, United KingdomCo-Author: Horacio Luis Carvalho, Chairman, STOR Generation Ltd, United Kingdom
10:30 – 11:00 DeLegate COFFee BreaK
THURSDAY 6 JUNE
POWER-GEN EUROPECONFERENCE PROGRAMME
24 www.powergeneurope.com
TRACK 1: STRATEGIES FOR THE EUROPEAN POWER SECTOR
SESSION 7: THE FUTURE OF FOSSIL FIRED POWER GENERATIONroom: Lehar 111:00 – 12:30A candid review the future of fossil fired generation in a low or zero carbon electricity industry. Fossil fuel deposits are a major reservoir of stored and flexible energy and the debate will focus on how this resource can be used to best effect
Chair: Anne Marie Hey, Managing Director, Dutch Gas Turbine Association VGT, NetherlandsCo-Chair: John Horner, Director, E for Energy UK, United Kingdom
What does the UK’s electricity Market reform (eMr) Mean for Conventional Power?Simon Hobday, Partner, Pinsent Masons, United Kingdom
New tasks for Fossil-Fired Power generationAndreas Pickard, R&D and Innovation Manager, Siemens AG, Energy Sector, Germany
TRACK 2: ROAD TO DECARBONIzATION - CCS ENERGY EFFICIENCY & CHP
Three plants, three technologies and three CCS experiences
Chair: Pascal Stijns, Power & Energy Marketing Europe, Honeywell, BelgiumCo-Chair: Christoph Blessing, Senior Engineer, EnBW Kraftwerke AG, Germany
Ferrybridge CCPiLOt100+ Operating experience and test resultsMatthew Hunt, CCS Sales Manager, Doosan Power Systems, United KingdomCo-Author: David Fitzgerald, Plant Product Innovation Technical Lead, Doosan Power Systems, United KingdomRebecca Gardiner, Doosan Power Systems, United Kingdom
Chilled ammonia Process at technology Center Mongstad-First resultsKen McCarley, Manager, Process Development, Alstom Power, United StatesCo-Authors: Jennifer Chee Wei Luk, United StatesSantosh Lanka, NorwayRameshwar Hiwale, Sr. Process Development Engineer, Alstom Power Inc., United States
First Operational experiences in the CiUDeN 30 MWth Oxy-CFB FacilityFrancisco Muñoz, R&D Engineer, Fundación Ciudad de la Energía CIUDEN, SpainCo-Authors: Ruth Diego, R&D Department Coordinator, CIUDEN, SpainJouni Lantto, R&D Engineer, Foster Wheeler Oy, FinlandMonica Lupion, External Relations Director, CIUDEN, SpainPasi Petra, R&D Engineer, Foster Wheeler Energia Oy, Finland
TRACK 3: GAS FIRED POWER TECHNOLOGY
SESSION 7: DEVELOPMENTS IN GT COMBUSTION TECHNOLOGYroom: Lehar 311:00 – 12:30Fuel flexibility and the latest in GT combustion technology
Chair: Enrique Sanchez, Director of Operations for Spain and Portugal, Nooter/Eriksen Ltd., SpainCo-Chair: Regine Mowill, Marketing Manager, OPRA Turbines B.V., Netherlands
Fuel Flexibility Concepts and experience for Power generation with hydrogen Based FuelsRobert Jones, Manager - Syngas Power Island Products, GE Energy, United StatesCo-Authors: Terry Raddings, Thermal Applications Engineering - Manager, GE Energy, United KingdomJames DiCampli, LM6000 Technology Manager, GE, United States
Fuel Flexibility Capabilities of alstom’s gt26 gas turbinePeter Marx, GT Program Manager, Alstom Power, Switzerland
ansaldo ae94.3a Combustion improvement towards Flexibility through extensive Field testingPaolo Traverso, R&D Project Manager, Ansaldo Energia, ItalyCo-Authors: Francesco Malavasi, Engineer, Ansaldo Energia SpA, ItalyPaolo Pesce, Engineer, Ansaldo Energia SpA, ItalyAlice Virginia Pesenti, Engineer, Ansaldo Energia SpA, ItalyDomenico Zito, Combustion Engineer, Ansaldo Energia, Italy
Puertollano igCC: Fuel and Products FlexibilityPilar Coca Llano, Researcher, ELCOGAS, SpainCo-Author: Francisco García Peña, R&D Department Manager, ELCOGAS, Spain
TRACK 4: THERMAL & NUCLEAR POWER PLANTS
SESSION 7: BIOMASS, WASTE & COFIRINGroom: Lehar 411:00 – 12:30Experiences of various concepts for gasification and combustion
Chair: Bernd von der Heide, Managing Director, Mehldau & Steinfath Umwelttechnik GmbH, GermanyCo-Chair: Kari Niemelä, Vice President Sales, Western Europe, Foster Wheeler Energia OY, Finland
Kymijärvi ii Plant – high-efficiency use of srF in Power Production through gasificationJuhani Isaksson, Director, Gasification Technology, Metso Power Oy, FinlandCo-Authors: Timo Honkola, Chief Engineer, Gasification Technology, Metso Power Oy, FinlandJanne Savelainen, Chief Executive Officer, Lahti Energy Ltd., Finland
Operation experience of Fluidized Bed Boilers in sweden with Different Kind of FuelsSebastian Kaiser, Head of Process Engineering, Andritz, AustriaCo-Author: Seppo Hulkkonen, Technology Director, Andritz, Finland
THURSDAY 6 JUNE
www.powergeneurope.com 25
industrial rDF and MsW Power Projects - industrial experience of the rhKW LinzPhilipp Kolbitsch, Process Engineer, STRABAG Energy Technologies GmbH, Austria
Non Contaminated Multi-Fuel Fired Biomass Cogeneration Plant which is Developed, Built and Operated by Zignago Power in Fossalta di Portogruaro, region Veneto, North east of Venice, italyFrank Scholdann Lund, Manager, Aalborg Energie Technik a/s, DenmarkCo-Authors: Kim Kejser Dyrholm, Project Director, Aalborg Energie Technik a/s, DenmarkAllesandro Casula, Consultant, Politecnico Milano, ItalyAndrea Bigai, Project Manager, Zignago Power, ItalyLuca Marzotto, CEO, Zignago Holding Spa, United Kingdom
TRACK 5: ELECTRICAL & AUTOMATION FOR POWER GENERATION
SESSION 7: GENERATOR AUxILIARIESroom: stolz 111:00 – 12:30Impact of generator system design and operation
Chair: Enzo Tortello, Electrical Engineer - Senior Consultant, Ansaldo Energia, ItalyCo-Chair: Dietmar Wolf, Business Development Manager, ABB AG, Austria
Why Choose an electric starter for your gas turbines?Adrien Tenga, Division Marketing Manager, Parker Hannifin, FranceCo-Author: Nigel Smith, European Marketing Services Manager, Parker Hannifin, United Kingdom
generator Current transformers, applications and testsVladimir Khalin, Test Engineering, ABB, Inc, United StatesCo-Author: Stephen Lindsay, Marketing and Sales Manager, Distribution Components, ABB, United States
introduction of automatic reclosing with synchro Check in 110 kV Lines Near the generators in the slovenian Power systemMilos Maksic, Researcher, Electoinstitut Milan Vidmar, SloveniaCo-Authors: Joze Kragelj, Head of Network and Protection System, Holding Slovenske Elektrarne, SloveniaAnton Majcen, Senior Protection Engineer, Electroinstitute Milan Vidmar, SloveniaFranc Prepeluh, BScEE, ELES, SloveniaGeorgi Zlatarev, Senior Researcher, Electroinstitute Milan Vidmar, Slovenia
Modern excitation systems for the growing Chinese Market Under the aspect of Changing grid requirementsRafael Kawecki, Product Manager Excitation Systems and Startup, Siemens AG, GermanyCo-Author: Ruediger Kutzner, Professor, University of Applied Sciences and Arts, Germany
Chair: Stefan Ritzmann, Global Marketing & Communication Manager, ABB Power Generation Service, SwitzerlandCo-Chair: Graham Fagence, Business Development, Hitachi Power Europe, United Kingdom
Combustion Optimization, efficiency improvements and emission reduction by installation of Modern Low NOx Firing systems at existing Bituminous Coal and Lignite Fired steam generatorsBernhard Zimmermann, Head Combustion Department, Steinmüller Engineering GmbH, GermanyCo-Authors: Karl Heinz Failing, Manager Business Development, Steinmüller Engineering GmbH, GermanyRalf Kriegeskotte, Head of Operations Department, Steinmüller Engineering GmbH, GermanyHans-Ulrich Thierbach, Head of Technology Sector, Steinmüller Engineering GmbH, GermanyPiotr Szkoda, Power Generation Service Manager, ABB Power Systems Poland, United Kingdom
energy efficiency increasing by Modernization of air Fans Drives in Coal Fired Power PlantsWojciech Kowal, Power Generation Manager, ABB Power Systems Poland, PolandCo-Author: Piotr Szkoda, Power Generation Service Manager, ABB Power Systems Poland, United Kingdom
Optimized Plant retrofit - Plant improvement Whilst Meeting environmental requirementsDavid Bell, Engineering Manager, Alstom Power, United KingdomCo-Author: Johan Faelling, Head of Performance Test, Alstom Power, United Kingdom
SESSION 7B: PLANT OPTIMIzATION & MONITORING IIroom: schubert 3,First Floor11:00 - 12:30Monitoring and optimization tools for coal/lignite fired plant
Chair: Andras Baczoni, Development Manager for Power Industry, Nalco Company, HungaryCo-Chair: Sjirk van der Goot, Marketing & Communications Manager, VBR Turbine Partners, Netherlands
Online Diagnostics of steam Pipes and thick Walled Boiler Components - a Comparison of Methods Basing on Operational experienceJoel Wagner, Product Manager, STEAG Energy Services GmbH, Germany
recent Developments in Pulse reflectometry for tube inspectionNoam Amir, Chief Technical Officer, AcousticEye Ltd., Netherlands
POWER-GEN EUROPECONFERENCE PROGRAMME
THURSDAY 6 JUNE
26 www.powergeneurope.com
JOINT INTEGRATION TRACK
SESSION 7: MARKET MECHANISMSroom: schubert 6, First Floor11:00 - 12:30Speakers presenting here will explore options for market engagement. That means in-depth analysis of a number of markets and the appropriate strategies that can potentially deliver an economic return on investment. For those interested in successfully executing a European renewable energy project, this session is an essential
Chair: David Appleyard, Conference Director, PennWell, United Kingdom
Flexibility for germany’s energy transitionSönke Häseler, Research Fellow, University of Hamburg, Germany
impact of the implementation of a german Capacity Market in Combination with high intermittent generation in the North-West european electricity MarketJeroen de Joode, Senior Researcher, Energy Research Centre of the Netherlands, Netherlands
Additional speakers to be confirmed
12:30 – 14:00 DeLegate LUNCh
15:00 – 16:00 Best PaPer aWarDs & CLOsiNg reCePtiON
THURSDAY 6 JUNE
This year’s conference features special sessions devoted to aspects of energy storage across both POWER-GEN Europe and Renewable Energy World Europe programmes.
Storage of energy in large quantities is increasingly regarded as a vital element in order to improve the flexibility and stability of Europe’s energy system and to deliver services to with respect to European energy and climate policy. Viable storage solutions will reduce the need for back-up power, help stabilize the grid and enable more renewable capacity to be absorbed into the power system.
Technologies vary from the mature to the nascent, although the fast emergence of sizable renewable energy capacity on the system is hastening developments in energy storage. The conference programme in Vienna is reflecting this progress and heightened level of interest by offering a number of sessions aimed at sharing and disseminating energy storage-related information. Make sure you are up to speed on developments in this important sector by looking out for these sessions marked with the energy storage symbol.
POWER-GEN EUROPEENERGY STORAGE FOCUS
Mr. Dietmar adamBranch ManagerEndress+Hauser Metso AGSwitzerland
Mr. eric adamsProposals Manager, Power GenerationParsons BrinckerhoffUK
Mr. albert d’avellaInternational Business Development Vice PresidentArevaFrance
Mr. andras BaczoniDevelopment Manager for Power IndustryNalco Company – EAME RegionUK
Dr. Juan Carlos BallesterosManager R&DEndesa GeneraciónSpain
Mr. Detlef BaranManager Sales and MarketingHelmut Mauell GmbHGermany
Dr. Pietro BarbucciHead of Fossil Fuels, Research & Development Policies Engineering & Innovation DivisionEnel Produzione SpAItaly
Mr. giancarlo BenelliHead of Technological ScoutingEnel Engineering and Innovation DivisionItaly
Mr. Niels Bergh-hansenExecutive Vice PresidentDONG Energy A/SDenmark
Mr. Christoph BlessingSenior EngineerEnBW Kraftwerke AGGermany
Mr. Pier giuseppe BottiniBusiness Development & Projects ManagerEnipowerItaly
Mr. gerhard BrandtHead of Marketing and CommunicationABB AGGermany
Mr. Peter BreahausChief ScientistIRIS - International Research Institute of StavangerNorway
Mr. Jose Maria BronteDirector GeneralBahia de Bizkaia Electricidad,S.L.Spain
Mr. Didier BrudyTeam ManagerEDF - Basic Design DepartmentFrance
Mr. adrian BullExternal Relations DirectorUK National Nuclear LaboratoryUK
Mr. Fernando CamposFossil & Renewable Energy Business Development ManagerTecnatom SASpain
Mr. eldred ClarkEngineering ManagerACE European GroupUK
Mr. Patrick ClerensSecretary GeneralEuropean Power Plant Suppliers Association (EPPSA)Belgium
Dr. alessandro ClericiChair WEC Study Group on “ Survey of Energy Resources and Technologies”Italy
Mr. arthur CloseSales DirectorBlack & Veatch EnergyUK
Mr. James CroninPrincipal ConsultantCronin Energy ConsultingIreland
Mr. Norbert DahlmannSenior ManagerE.ON AnlagenserviceGermany
Mr. Philippe DelageVice President, Strategic Yield ImprovementAlstom PowerSwitzerland
Mr. albertus DijksSenior ConsultantDNV KEMAThe Netherlands
Mr. giorgio DoderoPresidentIPG Industrial Project Group S.r.lItaly
Mr. Colin ellamCapital Projects DirectorAccentureUK
Mr. Clayton ericksonVice President EuropeBabcock Power UK Ltd.UK
Mr. graham FagenceBusiness DevelopmentHitachi Power EuropeUK
Dr. andreas FeldmuellerHead of Integrated Plant SolutionsSiemens EnergyGermany
Mr. antonio Ferreira CostaDirectorEDP Group - EDP GenerationPortugal
Mr. Mike FerrisBusiness Unit Manager - Western EuropeEmerson Process ManagementUK
Mr. enrico FiluschMarketing & Communications ManagerSiemens EnergyGermany
Mr. David FitzgeraldR&D Group LeaderDoosan Power SystemsUK
Dr. Monica FrogheriSafety AdvisorAnsaldo NucleareItaly
Mr. Bernt FrydenbergAdvisor – CDM StrategyMercapto ConsultDenmark
Dr. Michael FübiChief Technical OfficerRWE Technology GmbHGermany
Dr. François gigerStrategy Director, Thermal Generation & Engineering DirectionEDFFrance
Mr. robert glietzVice President, Product Platform Mgmt, Steam BusinessAlstom PowerSwitzerland
Mr. Jean-Pierre goffinMechanics & Civil Works Section ManagerTractebel Engineering (GDF Suez)Belgium
Mr. Jerzy grynblatNuclear Business DirectorScandpower ABSweden
Mr. stefan hattGroup Vice PresidentABB Ltd.Switzerland
Ms. anne Marie heyManaging DirectorDutch Gas Turbine Association (DGTA)The Netherlands
Mr. simon hobdayPartnerPinsent Masons LLPUK
Dr. John hornerDirectorE for Energy Consulting UKUK
Mr. Frank höseHead of Sales, Steam Power Plant SolutionsSiemens EnergyGermany
Mr. Jan De JongInnovation ManagerEssentThe Netherlands
PennWell wishes to thank the individual members of the POWER-GEN Europe Advisory Board for the generous donation of their time and expertise in the production of the 2013 conference programme.
POWER-GEN EUROPEADVISORY BOARD
28 www.powergeneurope.com
Mr. Piotr KarasMarketing DirectorRafako S.A.Poland
Mr. stephen W. KiddDeputy Director GeneralWorld Nuclear AssociationUK
Mr. Frank-Peter KirschningManaging Director Power StationEnBW Kraftwerke AGGermany
Dr. Wilhelm KleffnerHead of Power Plant FrankenE.ON Kraftwerke GmbHGermany
Dr. Jacob KlimstraEnergy and Engine ConsultantJacob Klimstra ConsultancyThe Netherlands
Dr. Carlos KoenekeVice President, Project Engineering & Quality AssuranceMitsubishi Power Systems AmericasUSA
Mr. rüdiger KönigHead of International Nuclear DevelopmentRWE Technology GmbHGermany
Mr. andrzej KowalskiPresident of the BoardEnergoprojekt Katowice SAPoland
Mr. adolfo eric LabiPresidentMegalia FoundationItaly
Mr. Jari LeppäkoskiManager, Energy EfficiencyMetso Automation OyFinland
Mr. Johann LindnerDirector Business Development - EuropeExcel Services CorporationUSA
Dr. glen LittleDirector Nuclear New BuildDoosan Power SystemsUK
Mr. Ole MadsenDirector, Technology & MarketingBabcock & Wilcox Vølund A/SDenmark
Mr. enrico MalusardiSenior ConsultantEdison SpAItaly
Mr. Olivier MandementSenior Product Specialist - NuclearAlstomFrance
Mr. Chris McgarveyLegal DirectorPinsent MasonsUK
Dr. ronald MeijerManaging Principal Clean Fossil PowerDNV KEMA Energy & SustainabilityThe Netherlands
Miss regine MowillMarketing ManagerOPRA TurbinesThe Netherlands
Mr. Kari NiemeläVice President Sales, Western EuropeFoster Wheeler Energia OYFinland
Mr. risto PaldaniusBusiness Development DirectorWärtsilä Corporation, Power PlantsFinland
Mrs. Ulla PetterssonDirectorE for Energy Management ConsultingSweden
Dipl. ing. andreas PickardHead of Product Marketing PlantsSiemens EnergyGermany
Mr. herbert PierederChief Executive OfficerApplied Semiconductor Ltd.UK
Mr. Christian PlomerGeneral Manager, Power & Energy - Europe & AfricaYOKOGAWA GesmbHAustria
Dr. David J. PowellVP European Nuclear Power Plant SalesGE HitachiUK
Mr. terry raddingsTechnology Marketing Manager EuropeGE EnergyUK
Mr. Peter rammChief Operating OfficerAdvanced Power AGUK
Mr. ilari räisänenHead of Risk ControlFortum Power and Heat OyFinland
Mr. Matti rautanenManager - R & DMetso Power OyFinland
Mr. Pier Francesco rimbottiEnergy Consultant and Developer & PresidentSepro S.R.L & Infrastrutture SpAItaly
Mr. stefan ritzmannMarketing Communication ManagerABBSwitzerland
Mr. Franco rosatelliChief Technical OfficerAnsaldo EnergiaItaly
Mr. enrique sánchezDirector of Operations for Spain and PortugalNooter/Eriksen Ltd.Spain
Ms. Jeanette sapperDivision Communications Group MemberABBGermany
Mr. Klaus schubertCustomer Management, Head of Sales Power PlantsDoosan Power Systems EuropeGermany
Dr. eberhard schreiberSenior ConsultantAIEGermany
Mr. Mark stevensProduct ManagerAlstomSwitzerland
Mr. Pascal stijnsPower & Energy Marketing EuropeHoneywellBelgium
Mr. enzo tortelloElectrical Engineer - Senior ConsultantAnsaldo EnergiaItaly
Mr. giampiero ValentiThermal Power Plant DevelopmentEnel Engineering and ResearchItaly
Mr. sjirk van der gootMarketing & Communications ManagerVBR Turbine PartnersThe Netherlands
Mr. Bernd von der heideManaging DirectorMehldau & Steinfath Umwelttechnik GmbHGermany
Mr. Mike van der JagtDirector Strategic SalesWoodward Nederland BVThe Netherlands
Mr. Dick Van Der VechtManager Competence Center EquipmentElectrabel Nederland nvThe Netherlands
Mr. ingo WeberHead of SalesMCE Berlin GmbHGermany
Mr. helmut WeilerIndependent ConsultantAssociation of Independent Engineers GmbHGermany
Mr. Matthias ZelingerSecretary GeneralEUTurbinesGermany
www.powergeneurope.com 29
On behalf of the intellectual Property rights alliance (iPr alliance), we invite you to POWer-geN europe Conference and exhibition.
INTELLECTUAL PROPERTYRIGHTS ALLIANCE
The IPR Alliance is an intellectual property (IP)-related lobby group which is federating European technology and equipment providers. Our main goal is to safeguard the European Union’s innovative spirit by strengthening and securing intellectual property rights.
The IPR Alliance was started and supported by the European Power Plant Suppliers Association (EPPSA), whose members have suffered from infringements of their intellectual property rights.
Following the EPPSA members inputs, the IPR Alliance wants to provide a qualitative lobby activity in the IP policy field. Its members will pinpoint the problems while a renowned IP academic institute (the Steinbeis-Transfer-Institute for IPR) will provide a substantive and deep analysis of those problems. Eventually a network of IP lawyers and experts (the I3PM) will further complement this analysis by submitting it to an ad hoc reality check.
Mindful that a sound, harmonised and progressive approach to intellectual property rights is essential to the endeavour of maintaining Europe as an innovation driven society, we believe that intellectual property is one of Europe’s greatest assets, the core of the European industrial competitiveness. It is a primary fuel for business, equally important to both large companies and SMEs, and a key to deliver high levels of employment, productivity and social cohesion.
This becomes even truer when speaking about technology companies which, by definition, can only grow on inventions. New technologies can only be developed by considerable investment which, in turn, requires a strong IP strategy and IP framework to deliver an adequate return.
Due to recent developments in the European IP-scenario, it is even more important today that technology manufacturers have a strong and central voice to lobby their IP concerns and needs towards EU policymakers. From 2013 on, Europe will witness the effects carried out by the Regulation n. 386/2012. Indeed, the European Observatory on Infringements of Intellectual Property Rights will become the European centre of excellence on information and data relating to intellectual property and the infringements of IP rights.
With this in mind, the IPR Alliance offers technology providers a mean of contributing directly and actively to the process of shaping EU political agenda and strategy concerning IP.
We believe that existing European and national IP initiatives should be coordinated, not replaced. Will help converging the fragmented working groups on intellectual property. The IPR Alliance is a common and fully company-driven initiative, where equipment providers can voice their problems and experiences while finding an exchange of best practice and concrete solutions protecting their business models.
For both EPPSA and the IPR Alliance, POWER-GEN Europe represents an important platform for exchanging ideas. But this event is not only excellent for networking and learning. It is also an exceptional opportunity to secure new and future market opportunities.
For these reasons you will be able to find us at POWER-GEN Europe 2013 together with EPPSA.
We hope to see you at POWER-GEN and we wish all exhibitors and visitors a successful and enjoyable stay in Vienna.
Patrick Clerens
Secretary GeneralEuropean Power Plant Suppliers Association - EPPSA
In the run up to POWER-GEN Europe 2013 we will be building a list of the top 100 most influential voices in the European power generation industry.
Whatever your role in the industry, we would like to know who you think is voicing the key issues power generators are facing; who is leading the thinking in the industry? Who is shaping the future with their innovations today?
Ultimately, we are looking to identify the men and women who, when they speak, cause the whole community to sit up and take notice. It could be a CEO, an engineer, a journalist, an entrepreneur, or even a politician - just as long it’s someone who you see as being instrumental to the long-term evolution of the power sector.
Over the course of the next six months, we’ll be taking votes via Twitter and will track the top 10 on a monthly basis on our blog http://pgeevents.wordpress.com/
On 6th June 2013 in Vienna, we will reveal who clinched the Number 1 spot, while the full list will be published on the POWER100 page of the POWER-GEN Europe event website www.powergeneurope.com
To make your nomination, please Tweet us at @POWERGENEUROPE using the hashtag #Power100.
For example:Kate Garratt @kate_garratt: @POWERGENEUROPE I’m voting for Frank Hyldmar of @Elster_global for the #Power100
Course Overview and ObjectiveThis course contains specialized marketing techniques & strategies to utility & industrial facilities in the global power industry. Added emphasis has been provided on boiler, turbine, generator, balance of plant and emission control technologies. The techniques and tools identified would include optimizing a company’s sales & marketing effort to the global power, pulp & paper, and other related industries. The specific focus will be on the European and American power markets with some discussion of Asian power markets such as India.
the course material will include:1. A Brief Overview of the Major Global Power Markets2. Defining Target Market Segments3. Customer Intelligence Systems4. Media & Branding Strategies For Global Industry Recognition 5. Targeted Database Marketing6. Advertising, Sales & Business Development Strategies7. Importance of Case Studies & Published Papers8. Direct Selling & Lead Generation9. E-Marketing, Search Engine Optimization & Social Media10. Key Industry Conferences to Attend
instructor’s BiographyRavi Krishnan, Managing Director, Krishnan & Associates Inc.Ravi’s areas of expertise are international marketing & business development for the global power industry. K&A has successfully launched and presently markets a range of equipment, services and environmental technologies to power plants and industrial facilities in USA, Europe and India. Key areas of focus are new market penetration, product launch, market development, customer acquisition, strategic alliances, and brand management.
Workshop Fee: €325For registration information please see page’s 45– 46
Pre-Conference Workshopspecialized Marketing, sales & Communication techniques to the Power generation Market
Monday 3 June, 09:30-12:30room: schubert 1-2, First Floor, Congress Center, Messe Wieninstructor: ravi Krishnan, Managing Director, Krishnan & associates inc., Usa
Who should attendMarketing executives, sales & business development personnel, project managers & engineers, R&D personnel from OEMs and service providers to the International Power Industry
POWER100
Thursday 6 June 201315:00 – 16:00
The closing reception for all participants of POWER-GEN Europe and its sister event Renewable Energy World Europe will begin at 15:00 on Thursday 6 June, where the presentation of the conference Best Paper Awards will take place as well as the questionnaire prize draw for an Apple iPad.
The Best Paper Awards will be presented for the POWER-GEN Europe conference, as well as speakers from Renewable Energy World Europe.
Judges from the expert conference programme Advisory Boards from both events will choose a Best Paper Award winner from each of the conference tracks with the judging criteria based on outstanding concept and content.
There will also be two highly commended papers in each category. Winners of these prestigious awards are recognized by the industry as being the ‘best of the best’ and we wish all eligible speakers the very best of luck.
All attendees can enter a prize draw for an Apple iPad by completing a questionnaire form during the course of the event and being present at the time of the draw during the closing reception.
BEST PAPER AWARDS ANDCLOSING CEREMONY
32 www.powergeneurope.com
1
2
3
4
5
6
8
7
12
10
13
14
18
15
17
16
19
9
11
www.g loba lpowergen-communi ty.com
Want to make POWER-GEN Europe the most valuable event of the year? Start planning with My Event Planner today!
My Event Planner is a FREE exhibition organizer and scheduler that lets you view, compare and bookmark exhibiting companies, products and services that interest you while you search the DirectEventConnect exhibitor directory. You can build, refine and add to your planner right from your desktop at www.globalpowergen-community.com. After you bookmark exhibitors and products, they are automatically saved as favorites and are highlighted on your printable floor plan for you to follow on site.
How it works:
Benefits of Directeventconnect Before attenDing tHe event:
Build your profile today! | Visit www.globalpowergen-community.com
• Preview who and what will be at the event• Maximize your time at the event and set appointments to meet face-to-face with exhibitors• Network with other registered users and exhibitors
• Use your personalized floor plan to quickly direct you through the exhibition floor• Search for more companies, products and services onsite at the DirectEventConnect product locator kiosks throughout the event• Reprint your customized floor plan from the onsite product locators or anywhere Internet is provided, if you need an updated copy
Benefits of Directeventconnect wHile at tHe event:
Benefits of Directeventconnect after tHe event:
• Follow-up with those exhibitors and fellow attendees that you met at the event• Connect with exhibitors and fellow attendees that you weren’t able to meet with onsite
4 – 6 June 2013Messe Wien, Vienna, Austria
www.powergeneurope.com 33
technicaltourstechnical tour 1: ccGt – simmering PlantOwner/Operator: Wien Energie
Date: Monday 3rd June 2013
Meeting Time: 09:00am
Meeting Point: Registration Area, Foyer A, Messe Wien
Duration: Approximately 5 hours
Cost: €90
Simmering 1 is a combined gas and steam power plant that has an installed electric output of 710MW and a district heating output of 450 MW, making it the highest performing power plant owned by Wien Energie. It was commissioned in 2009 and is one of the most modern and environmentally friendly plants of its kind. The Simmering 2 and 3 power plants are located at the same site.
Modern combined gas and steam power plants only achieve an efficiency ratio of between 50 and 60 per cent; cogeneration technology enables theseWien Energie plants to achieve a fuel utilization ratio of up to 86 per cent.
Even the cooling water is being used to produce electricity; the water is processed by a Kaplan turbine before being fed back into the Danube canal.
Attendees are required to wear sensible casual clothing.
For further information about the above technical tour and others which will be announced soon, please visit www.powergeneurope.com and select the Tech Tour button on the home page.
russian enerGY MinistrYseMinar
14:00 – 17:30russia – ProsPects For DeVeloPMent oF the PoWer inDustrYStrauss 2-3, First Floor, Congress Center, Messe WienHost: Ministry of Energy of Russian FederationOpen to all attendees
14:00 – 15:30 russia – Prospects and investment Potential for the Future Development of smart energyKey discussion issues:• Smart grids – platform of Russian innovative economy• The prospect of UES Russia • Implementation and development of the state policy in the field of energy saving and energy efficiency• The relevance of global changes in energy.• Financing of energy efficiency projects: new challenges and new tools
15:30 – 16:00 – Delegate coffee Break
16:00 – 17:30european experience of the transition from conventional sources to renewable energy. state regional support Programs For small Business Development in the energy sectorKey discussion issues:• European legislative model of transition to renewable energy• European financial model of transition to renewable energy• State policy and legislation in the field of renewable energy: International Experience and Russian Reality• Experience of international banks in financing of projects and programs in renewable energy sector• Financial tools for energy efficiency projects implementation in Russia. • Experience of state-private partnership
tuesDaY 4 june
34 www.powergeneurope.com
ExHIBITORCOMMITTEE
Aalborg Energie Technik A/S Frank Scholdann Lund
ABB Stefania Mascheroni
ABB AG Gerhard Brandt
ALSTOM Alexandra Weber
ALSTOM Florence Vanin
Ansaldo Energia Michaela Montecucco
Apr Energy Libby Owen
Babcock and Wilcox Wendy Easterling
Babcock Power Jennifer Pasquariello
Balcke Duerr GmbH Volker Schuler
BRUSH Turbogenerators Tony Fogwill
CD Adapco Sandra Maureder
Doosan Power Systems Nicola Engler
DP Clean Tech Anders Brendstrup
Dresser Rand Steve Canham
Dresser Rand Thomas Levis
DURAG GMBH Roland Zepeck
E.ON Anlagenservice Christian Mehrhoff
Energoprojekt-Katowice SA Jan Antonczyk
ETS Power Mark Dender
FATA EPC Division of FATA SpA Enzo Chieppa
Foster Wheeler Bob Giglio
French Chambre of Commerce Isabelle Blanchard
Garioni Naval S.p.A Ornella Baronio
GE Power & Water Mark Cox
GEA Energy Technology GmbH Nicole Hueckels
Greenbank Terotech Ltd Ray Moorehead
Hilliard Mark Rose
Hitachi Power Europe GmbH Helge Schulz
Industrial Information Resources Michael Bergen
JSC Elem Mirche Kotevski
Leslie Controls Ken Lazarra
Man Diesel & Turbo Sabine Grafen
Mee Industries John Mee
METKA S.A. Aristomenis Kalkavouras
MTU Friedrichshafen GmbH Uwe Harting
Nalco Mobotec Russel Carter
National Electric Coil Jane Hutt
Phoenix Contact Gmbh & Co Kg Andreas Von Der Kall
Pratt & Whitney Power Systems Lucia Maffucci
Rafako SA Piotr Karas
Siemens Power Generation Erhard Goess
SPIG SpA Marianna Caputo
United Conveyor Mark Burns
VDMA - Power Systems Elke Schramm
Wartsila Svante Betlehem
Company Name Company Name
www.powergeneurope.com 35
ExHIBIT ATPOWER-GEN EUROPEthere are stiLL OPPOrtUNities tO eXhiBit at POWer-geN eUrOPe.For further information, please visit the event website www.powergeneurope.com or contact your local PennWell sales contact (see page 38 for contact details). In the meantime, here are some good reasons to participate.
ExHIBITOR PACKAGEMinimum 3 metres x 3 metres of exhibit space. Exhibit space only rate is €440.00 per square metre.Shell scheme package rate is €570.00 per sq. mtr. (min. 3m x 3m) of shell scheme, which includes exhibit space, shell scheme walls, one (1) table, two (2) chairs, three (3) spotlights, one (1) waste basket, company ID sign on each side, and standard carpet with each 3m x 3m unit. (N.B. Shell scheme does not include electricity connection and consumption)
Enhanced Exhibitor Listing: www.globalpowergen-community.comIn addition to the exhibit space above, a compulsory basic enhanced listing on the Exhibition websites interactive online community - DirectEventConnect - will be charged at a flat rate of €395.00 The online listing includes descriptions and photos of up to 5 product listings and categories, a 35-word company description, 25 keywords, and full contact details; as well as a 35-word standard listing in the official print show guide. This fully searchable community will give your buyers access to your information and provide an opportunity for you to communicate with potential customers before the Exhibition.
Increase your visibility by upgrading your listing to Gold (€550) or Platinum (€675) and receive these additional features:1. Include your full colour logo in the printed Show Guide
2. Increase your company description in the printed Show Guide from 35 to 75 words (Gold) or 150 words (Platinum)
3. Increase your company description online from 35 to 75 (Gold) or 500 words (Platinum)
4. Increase your product listings from 5 to 7 (Gold) or 10 listings (Platinum)
5. Feature your products (up to 2) in the New Product Promotion section
6. Add 10 uploads and links (video, audio, white paper, etc.) to your company profile (Platinum only)
For further information please contact:
UK, Italy, France, Turkey Greece and Benelux:Gilbert Weir Jnr.T: +44 1992 656 617E: [email protected]
• Unrivalledplatformtocreatesalesleadsandmakelasting relationships with clients
• Accesstotheindustry’smostinfluentialdecisionmakersover 3 days
• Stayaheadofyourcompetition
• Meetyourcustomersfacetoface
WHY ExHIBIT?
• Publicandmunicipalutilityowners&managers
• Governmentandregulatoryexecutives
• Independentpowerproducers
• Renewableenergysystemproducers
• Originalequipmentmanufacturers
• Power/heatplantowners&operators
• Plantservicesector
• Projectdevelopers&managers
• Fuelsuppliers
• Design/structural/constructionengineers
• Consultantsinrenewableenergy
• Industrialfacilitiespersonnel
• Mechanical/electrical/plantengineers
• Strategicandportfolioinvestors
• Industryconsultantsandadvisers
• Energytraders
• Tradepress
Qualified senior management/executive decision makers who have the authority to purchase, or influence the purchase of world-class products and services including:
WHO ATTENDS?
36 www.powergeneurope.com
4 – 6 June 2013Messe Wien, Vienna, Austria
Is your business getting maximum exposure? Are you using DirectEventConnect?
If not, now is the time to make it easy for buyers to find you regardless of the size of your booth. With DirectEventConnect you can showcase your products and services before, during and after an event to thousands of qualified buyers.
Think of it as an online community but with benefits that go far beyond the web!
toP 3 reasonsTO UPgraDe TO A GOLD OR PLATINUM LISTING:
1. Advertise NEW products and solutions!
2. Showcase MORE of your products and services!
3. STAND OUT from your competition!
For more information, please contact: Exhibitor Services T:+44 (0)1992 656 637 • F:+44 (0)1992 656 700 • [email protected]
€395 €550 €675
www.powergeneurope.com 37
For further information on exhibiting and sponsorship opportunities at POWER-GEN Europe in Vienna please visit www.powergeneurope.com or contact:
SPONSORSHIP & SALES
POWER-GEN EUROPECONTACTS
POWER-GEN Europe is an opportunity for comparison and high-level meetings; there was a detailed conference program which covered many topics.
Dr. Matteo Sgaravato Proprietario at SGARAVATO SRL
Advertise your video message on big screens with larger than life audio/visual content at POWER-GEN EUROPE 2013
Enjoy regular exposure in between audio visual news and power generation content, your video will help you capture attention and project your message to event attendees.
Use your own prerecorded video or our production team can create your video onsite.
For more information and your POWER-GEN Europe Exhibitor Discount rate visit:www.powergeneurope.com/exhibit/power-gentv
Hurry, places are limited
Make an iMpact at pOWeR-Gen euROpe 2013
www.PowerEngineeringInt.com
www.powergeneurope.com 39
THE UTILITY PARTNER PROGRAMME (UPP)
To join your utility peers at the premier European power event please contact:
Now in its third year and growing ever more successful, the Utility Partner Programme (UPP) continues for 2013. The UPP places utilities at the heart of PennWell’s European power events, and offers a range of exclusive discounts and benefits to employees from this sector of the power generation industry. The Utility Partner Programme affords privileges to member companies and their employees attending PennWell’s power events, enabling them to network with utility peers and meet with the supplier market.
ENEL
Wien Energie
E.ON
Edison
Essent
Tractebel Engineering (GDF SUEZ)
Electrabel
Dong Energy
Enipower
EDF
Evonik Energy
Fortum
RWE Technology
Verbund
• Discounted delegate rates
• Fast-Track entry at a dedicated utility registration desk
• Access to a members-only UPP lounge on the exhibition floor, with comfortable seating, meeting room & networking areas, complimentary refreshments and a range of IT facilities
• Over 270 presentations under one roof
• Access to the exhibit floors with over 500 exhibitors
• Lunch for all three days
• Conference proceedings
Booth 9B30
If you work for a
utility company
you are entitled
to all of these
benefits!
UPP member delegates receive:
Employees from the following utility companies have already registered for the Utility Partner Programme:
Aspectus PR and its German partner agency HFN, will once again be promoting POWER-GEN Europe and its co-located event Renewable Energy World Europe. As an exhibitor you have a number of opportunities to promote your organisation’s presence at the event. The closer you work with Aspectus PR and HFN the more likely the event will be a success for you. DON’T MISS OUT – it doesn’t cost you anything and there are many different ways exhibitors can get involved in the PR campaign including:
PRESS OFFICE, PR &SOCIAL MEDIA
By-lined opinion articlesThere are a number of European publications that are keen to receive by-lined articles from exhibitors in all languages. If you send us an 800-1000 word thought leadership article we will try to place it for you. To secure the placement of your articles they will need to be opinion based and non-company or product-centric. For style guidelines please contact Aspectus PR. The deadline for receiving by-lined article content is 1 March 2013.
Quotes for your press releasesIf you are sending out a press release and would like to include a quote from the organisers of the event Aspectus can help get an appropriate expert to provide comment.
in-house publications and website promotionIf you run an in-house publication and would like to publish a preview of the show alongside what you will be doing at the event to distribute internally or to your clients and partners, or would like to promote your presence at the event on your website, Aspectus can assist with content, logos and images.
Daily Newspaper The show daily newspaper TODAY is produced by the editorial team behind Power Engineering International and Renewable Energy World. It briefs readers on the latest news from the events and covers new product launches on the show floor, conference sessions and the latest power news from around the world.
For editorial contributions, please contact Kelvin ross, [email protected]
Press roomExhibitors can display press kits, releases and notices in the press room during the event. Please bear in mind that most journalists prefer to receive press packs on a memory stick or CD so they don’t have to carry heavy materials around with them.
The press room is for the sole use of visiting journalists, who will be given details of all press conferences or other planned press events Aspectus PR is made aware of. If your organisation is planning any press activity at the event please ensure you inform Aspectus PR as soon as possible.
POWer-geN blogYou can keep up-to-date with everything happening at the show by visiting the POWER-GEN Europe 2013 blog: http://pgeevents.wordpress.com. We also welcome guest blog posts from exhibitors, please contact Aspectus for more opportunities..
LinkedinKeep up to date with all the latest information about the events and make contact with other exhibitors, speakers and visitors through our LinkedIn Groups here:
Lee CataniaMarketing ManagerRenewable Energy World Europe T: +44 (0) 1992 656 647E: [email protected]
www.powergeneurope.com 41
Gain unique exposure at POWER-GEN Europe by advertising in
Power Engineering International Magazine
14,000 copies will be at the show with exclusive distribution in POWER-GEN Europe visitor and delegate bags, giving you comprehensive coverage at the event, at no extra cost.
Plus your message will also be seen by Power Engineering International’s 14,150* qualified subscribers who are directly involved in the power industry.
Power Engineering International Magazine is the voice of POWER-GEN Europe and the power industry. Do not miss your chance to be a part of it.
www.PowerEngineeringInt.com
Influence the Global Power Industry by advertising in the official flagship media sponsor of:
The magazine for the international power industry
China seizes Europe
coal opportunity
www.PowerEngineeringInt.com
October 2012
Vattenfall’s low-carbon strategy
Planning tips for a
successful outage
Africa’s renewables/
gas engine solution
Indonesia’s power
sector opportunitiesOfficial Media Partner for
POWER-GEN Asia 2012
SHOW ISSUE
OC
TOBER
2012
POW
ER ENG
INEERIN
G IN
TERNA
TION
AL
VO
LUM
E 20, ISSUE 9
8 Power Engineering International
www.PowerEngineeringInt.com
News Update“There’s room for additional capacity,” Puno told Bloomberg. “We intend to meet the needs of the market by expanding our platform.” The company, which already owns two of the country’s three gas fired power facilities, will build another, which it will later expand, said Puno. First Gen will also invest in wind and hydroelectric projects, he added. Power outages have hit some provinces in the south of the Philippines this year. Luzon island, which accounts for three quarters of the nation’s electricity demand, will require at least 450 MW more from 2014, according to the Department of Energy website.
EUROPEFavourite bidder drops out of UK nuclear race
Uncertainty over nuclear power’s role in the UK’s energy future has intensified with the withdrawal of a highly fancied bidder in the race to build the country’s new generation of nuclear reactors.An alliance of French group Areva Euronext with China Guangdong Nuclear Power Corporation was expected to bid for the 6 GW Horizon joint venture, for which it was seen as the most promising candidate. Horizon, one of the UK’s biggest nuclear projects, was put up for sale in March by German utilities RWE and E.ON. The joint venture owns two nuclear sites in Britain where it plans to build 6 GW of nuclear capacity with an investment of $24bn.
The withdrawal of the most credible bidder narrows the field to a two-horse race between a group led by Hitachi of Japan and Westinghouse Electric, owned by Toshiba.
Dong and Iberdrola ‘set to quit Poland’Dong Energy and Iberdrola are reportedly poised to end operations in Poland as the country prepares to update its renewable energy sector regulations with a draft bill that
favours offshore wind over onshore facilities.But the firms are acting to cut debt rather than in response to Polish government policy, according to a source quoted in the Times newspaper.Dong’s three wind farms totalling 111.5 MW and Iberdrola’s 185 MW in turbines together make up almost a fifth of Poland’s 1.6 GW of wind capacity.
Poland generates about 90 per cent of its power with coal, but has committed to generating 15 per cent of its electricity through renewables by 2020. Renewables now account for about 8 per cent of power generation, with wind accounting for just under 2 per cent.
Ireland-UK power link goes live
Ireland and the UK are celebrating the activation of the first electricity interconnector between the two countries, with the UK now set to benefit from Ireland’s surplus wind power.The €600m ($770m) connection, running beneath the Irish Sea, advances efforts to build a high-voltage network joining Britain and its neighbours.The new undersea cable can transport 500 MW of power either way, and enable the UK to meet its renewable energy committments.Along with an existing interconnector between Scotland and Northern Ireland, the new link brings the total capacity for electricity imports to Britain from across the Irish Sea to 1000 MW.
“Ireland has some fantastic renewable energy resources and this interconnector will provide access to the massive UK customer base,” said Ed Davey, UK energy secretary.
German minister seeks brake on green switchoverSpeaking at Husum’s Wind Energy Trade Fair, German Environment Minister Peter Altmaier expressed concern over the pace at which the country is adopting renewable energy.
Altmaier hinted that Germany may have to slow down its planned transformation to green energy to reassure consumers, who are in line to bear the brunt of the immense costs of the switch from nuclear.Rising energy bills could prove politically sensitive with a general election now just a year away for Europe’s largest economy. Laws that give renewables above-market rates, have already fuelled a surge in solar panels and wind turbines in Germany.“If we let things continue, we will be getting 40 per cent or 45 per cent of our power from renewable energy by 2020 rather than 35 per cent,” Altmaier told the audience at Husum, northern Germany. While the rapid expansion was a good thing, “the faster the expansion of green power is, the more it costs,” he said.Resentment among some voters has also been raised by exemptions from higher bills for power-intensive industries seen as crucial for the country’s manufacturing sector.
Hollande sets Fessenheim closure target and rejects shale gas
French president Francois Hollande has vowed to close the country oldest nuclear plant Fessenheim by 2016 and has also pledged to reject the development of shale gas.In a wide-ranging speech on the environment, Hollande said Fessenheim
KEEPING EUROPE’S POWER
FLOWINGConference & Exhibition 4 – 6 June 2013Messe Wien, Vienna, Austria
INVITATION TO PARTICIPATE POWER-GEN Europe, the region’s largest event dedicated to power
generation, will feature top international power industry companies
demonstrating state of the art services and technologies covering
every aspect of electrical power generation. Taking Keeping Europe’s Power Flowing as the theme POWER-GEN
Europe’s insightful and thought-provoking multiple track conference
sessions will cover strategic and technical topics chosen and
presented by leading practitioners from the power industry itself. The 2012 event attracted 13,014 attendees, 595 exhibitors and 1054
delegates from 105 countries. Over 90 percent of visitors polled found
the event successful or very successful.Why you should exhibit at POWER-GEN Europe 2013��������������������������������� ������������� ����������������������������������������������� �
For further information on exhibiting and sponsorship
opportunities at POWER-GEN Europe in Vienna please visit
www.powergeneurope.com or contact:
Presented by:Supported by:
Co-located with
PGE_PEIuk_1211 1
10/29/12 4:27 PM
For more information, enter 5 at pei.hotims.com
Peter Altmaier,Germany’s environment minister
The magazine for the international power industry
Emissions cuts in an
economic downturn
The drivers behind
global fuel trendsAsia boom will last
say region’s players
Top tips for success
in new territories
Canada’s long
goodbye to coal
www.PowerEngineeringInt.com
November 2012
NO
VEM
BER 2012
POW
ER ENG
INEERIN
G IN
TERNA
TION
AL
VO
LUM
E 20, ISSUE 10
www.PowerEngineeringInt.com
* Source BPA June 2012 Qualified Circulation Statement
0051_PEI_A4_AD.indd 1 18/02/2013 12:05
Gain unique exposure at POWER-GEN Europe by advertising in
Power Engineering International Magazine
14,000 copies will be at the show with exclusive distribution in POWER-GEN Europe visitor and delegate bags, giving you comprehensive coverage at the event, at no extra cost.
Plus your message will also be seen by Power Engineering International’s 14,150* qualified subscribers who are directly involved in the power industry.
Power Engineering International Magazine is the voice of POWER-GEN Europe and the power industry. Do not miss your chance to be a part of it.
www.PowerEngineeringInt.com
Influence the Global Power Industry by advertising in the official flagship media sponsor of:
The magazine for the international power industry
China seizes Europe
coal opportunity
www.PowerEngineeringInt.com
October 2012
Vattenfall’s low-carbon strategy
Planning tips for a
successful outage
Africa’s renewables/
gas engine solution
Indonesia’s power
sector opportunitiesOfficial Media Partner for
POWER-GEN Asia 2012
SHOW ISSUE
OC
TOBER
2012
POW
ER ENG
INEERIN
G IN
TERNA
TION
AL
VO
LUM
E 20, ISSUE 9
8 Power Engineering International
www.PowerEngineeringInt.com
News Update“There’s room for additional capacity,” Puno told Bloomberg. “We intend to meet the needs of the market by expanding our platform.” The company, which already owns two of the country’s three gas fired power facilities, will build another, which it will later expand, said Puno. First Gen will also invest in wind and hydroelectric projects, he added. Power outages have hit some provinces in the south of the Philippines this year. Luzon island, which accounts for three quarters of the nation’s electricity demand, will require at least 450 MW more from 2014, according to the Department of Energy website.
EUROPEFavourite bidder drops out of UK nuclear race
Uncertainty over nuclear power’s role in the UK’s energy future has intensified with the withdrawal of a highly fancied bidder in the race to build the country’s new generation of nuclear reactors.An alliance of French group Areva Euronext with China Guangdong Nuclear Power Corporation was expected to bid for the 6 GW Horizon joint venture, for which it was seen as the most promising candidate. Horizon, one of the UK’s biggest nuclear projects, was put up for sale in March by German utilities RWE and E.ON. The joint venture owns two nuclear sites in Britain where it plans to build 6 GW of nuclear capacity with an investment of $24bn.
The withdrawal of the most credible bidder narrows the field to a two-horse race between a group led by Hitachi of Japan and Westinghouse Electric, owned by Toshiba.
Dong and Iberdrola ‘set to quit Poland’Dong Energy and Iberdrola are reportedly poised to end operations in Poland as the country prepares to update its renewable energy sector regulations with a draft bill that
favours offshore wind over onshore facilities.But the firms are acting to cut debt rather than in response to Polish government policy, according to a source quoted in the Times newspaper.Dong’s three wind farms totalling 111.5 MW and Iberdrola’s 185 MW in turbines together make up almost a fifth of Poland’s 1.6 GW of wind capacity.
Poland generates about 90 per cent of its power with coal, but has committed to generating 15 per cent of its electricity through renewables by 2020. Renewables now account for about 8 per cent of power generation, with wind accounting for just under 2 per cent.
Ireland-UK power link goes live
Ireland and the UK are celebrating the activation of the first electricity interconnector between the two countries, with the UK now set to benefit from Ireland’s surplus wind power.The €600m ($770m) connection, running beneath the Irish Sea, advances efforts to build a high-voltage network joining Britain and its neighbours.The new undersea cable can transport 500 MW of power either way, and enable the UK to meet its renewable energy committments.Along with an existing interconnector between Scotland and Northern Ireland, the new link brings the total capacity for electricity imports to Britain from across the Irish Sea to 1000 MW.
“Ireland has some fantastic renewable energy resources and this interconnector will provide access to the massive UK customer base,” said Ed Davey, UK energy secretary.
German minister seeks brake on green switchoverSpeaking at Husum’s Wind Energy Trade Fair, German Environment Minister Peter Altmaier expressed concern over the pace at which the country is adopting renewable energy.
Altmaier hinted that Germany may have to slow down its planned transformation to green energy to reassure consumers, who are in line to bear the brunt of the immense costs of the switch from nuclear.Rising energy bills could prove politically sensitive with a general election now just a year away for Europe’s largest economy. Laws that give renewables above-market rates, have already fuelled a surge in solar panels and wind turbines in Germany.“If we let things continue, we will be getting 40 per cent or 45 per cent of our power from renewable energy by 2020 rather than 35 per cent,” Altmaier told the audience at Husum, northern Germany. While the rapid expansion was a good thing, “the faster the expansion of green power is, the more it costs,” he said.Resentment among some voters has also been raised by exemptions from higher bills for power-intensive industries seen as crucial for the country’s manufacturing sector.
Hollande sets Fessenheim closure target and rejects shale gas
French president Francois Hollande has vowed to close the country oldest nuclear plant Fessenheim by 2016 and has also pledged to reject the development of shale gas.In a wide-ranging speech on the environment, Hollande said Fessenheim
KEEPING EUROPE’S POWER
FLOWINGConference & Exhibition 4 – 6 June 2013Messe Wien, Vienna, Austria
INVITATION TO PARTICIPATE POWER-GEN Europe, the region’s largest event dedicated to power
generation, will feature top international power industry companies
demonstrating state of the art services and technologies covering
every aspect of electrical power generation. Taking Keeping Europe’s Power Flowing as the theme POWER-GEN
Europe’s insightful and thought-provoking multiple track conference
sessions will cover strategic and technical topics chosen and
presented by leading practitioners from the power industry itself. The 2012 event attracted 13,014 attendees, 595 exhibitors and 1054
delegates from 105 countries. Over 90 percent of visitors polled found
the event successful or very successful.Why you should exhibit at POWER-GEN Europe 2013��������������������������������� ������������� ����������������������������������������������� �
For further information on exhibiting and sponsorship
opportunities at POWER-GEN Europe in Vienna please visit
www.powergeneurope.com or contact:
Presented by:Supported by:
Co-located with
PGE_PEIuk_1211 1
10/29/12 4:27 PM
For more information, enter 5 at pei.hotims.com
Peter Altmaier,Germany’s environment minister
The magazine for the international power industry
Emissions cuts in an
economic downturn
The drivers behind
global fuel trendsAsia boom will last
say region’s players
Top tips for success
in new territories
Canada’s long
goodbye to coal
www.PowerEngineeringInt.com
November 2012
NO
VEM
BER 2012
POW
ER ENG
INEERIN
G IN
TERNA
TION
AL
VO
LUM
E 20, ISSUE 10
www.PowerEngineeringInt.com
* Source BPA June 2012 Qualified Circulation Statement
0051_PEI_A4_AD.indd 1 18/02/2013 12:05
HOTELS &ABOUT VIENNAEvents in Focus, a market leader in accommodation, travel and on-site management for worldwide events, has once again been appointed as the official travel company for POWER-GEN Europe and Renewable Energy World Europe. The company offers competitive rates at a wide range of hotels including transfers, meet and greet, organising private functions and dinners during these events.
Events in Focus has secured special rates to fit all budgets, at a number of two-star to five-star hotels in Vienna within easy reach of Messe Wien. Due to the high demand for hotel accommodation for POWER-GEN Europe and Renewable Energy World Europe, Events in Focus advises that exhibitors and visitors make their booking early.
For information on the available hotels and to make your booking, please visit the event sites for either POWER-GEN Europe www.powergeneurope.com or Renewable Energy World Europe www.renewableenergyworld-europe.com and select the TRAVEL INFO tab.
should you require further information please contact:
randy WrightDirector – International Events/ConferencesT: +44 (0) 207 902 7761F: +44 (0) 207 633 9427E: [email protected]
ABOUT VIENNA
Vienna is the capital and largest city of Austria and one of the nine states of Austria. Vienna is Austria’s primary city, with a population of about 1.723 million (2.4 million within the metropolitan area, more than 25% of Austria’s population), and is by far the largest city in Austria, as well as its cultural, economic, and political centre. It is the 9th-largest city by population in the European Union. Until the beginning of the 20th century it was the largest German speaking city in the world, and before the first World War and the splitting of the Austro-Hungarian empire, the city had 2 million inhabitants.
Vienna is host to many major international organizations, including the United Nations and OPEC. The city lies in the east of Austria and is close to the borders of the Czech Republic, Slovakia, and Hungary. These regions work together in a European Centrope border region. Along with nearby Bratislava, Vienna forms a metropolitan region with 3 million inhabitants. In 2001, the city centre was designated a UNESCO World Heritage Site.
For further information,please visit: www.vienna.info/en
Complete mailing address (include country and postal code):
Country:
Postcode:
E-mail:
Tel (please include country code):
Confirmations will be sent by email if a unique email address is given
Fax (please include country code):
REGISTRATION FORM4 - 6 June 2013
Messe Wien, Vienna, Austria
I would like to receive/continue to receive a complimentary digital subscription to Power Engineering International q Yes q No Cogeneration & On-Site Power Production q Yes q No Renewable Energy World q Yes q No
Email address is required for digital magazine delivery
Please complete the following five sections: (Please tick ONE only in each section)
Choose one of four easy ways to register:• Complete and fax this form to: +1 918 831 9161 or
888 299 8057 (toll-free within U.S.)
• Mail this form to: Conferences and Exhibitions, Registration, P O Box 973059, Dallas, TX 75397-3059, USA
• Register online at: POWER-GEN Europe - www.powergeneurope.com
5. HOW DID YOU FIRST FIND OUT ABOUT THE EVENT? (Please check those that apply)
01 q Website: If so which one?
02 q Advertising: If so which publication?
03 q Call for paper
04 q Pre-show guide
05 q E-mail
06 q Word of mouth
07 q Other: Please state
PLEASE PRINT LEGIBLY
Please add all selections and total here: €
20% Austrian VAT: €
TOTAL DUE: €
Payment must be received by published date to receive early registration discounts. Cancellations must be received in writing before 17 May 2013 in order to receive a refund, minus a €100 administrative charge. After 17 May 2013 refunds on any POWER-GEN Europe activities/conference sessions are not available under any circumstances. Substitutions of personnel may be made at any time by contacting the registration office in writing.
METHOD OF PAYMENT
Payment must be received prior to admittance to the conference.
CHEQUE ENCLOSED (in € only) payable to PennWell / POWER-GEN Europe
WIRE TRANSFER (Wire transfer information will be provided with invoice)
CREDIT CARD: Amex Visa Mastercard
Card Number:
Expiry Date: / Name on Card:
Signature: (I understand that my signature authorizes PennWell to charge the above amount to my credit card).
POWER-GEN Europe, is owned and produced by PennWell Corporation. Please tick the following boxes if you do not wish to receive information about:
q POWER-GEN Europe q Other PennWell products q Carefully selected third parties
PAYMENT
4
4 4 4
4
1. EXHIBITION FLOOR ONLY:
Lunches, conference sessions and conference proceedings are NOT included.
Register before or on 17 May 2013 4 FREE
Register on or after 18 May 2013 4 €40
2. INDIVIDUAL CONFERENCE FEES:Three-Day Delegate
Includes entrance to exhibition, all co-located conference sessions, lunch on all three days and one conference proceedings:
Paid before or on 17 May 2013 4 €905
Paid on or after 18 May 2013 4 €1005
One-Day DelegateIncludes entrance to exhibition, conference sessions and lunch on one specified day. Please note conference proceedings are NOT included:
Paid before or on 17 May 2013 4 €480
Paid on or after 18 May 2013 4 €580
Please indicate the day you are registering for:
Tuesday 4 June 2013
Wednesday 5 June 2013
Thursday 6 June 2013
3. Three-Day Exhibitor Delegate(Must be a POWER-GEN Europe exhibitor)
Includes entrance to exhibition including set-up and tear down, all conference sessions, lunch on all three days and conference proceedings: 4 €590
Paid before or on 17 May 2013 4 €705Paid on or after 18 May 2013 4 €805
5. WORKSHOPSpecialised Marketing, Sales & Communication Techniques to the Power Generation Market: 4 €325
6. CORPORATE DELEGATE PLANS*:Each plan includes entrance to the exhibition, all conference sessions, lunch on all three days and one conference proceedings per delegate (company employees or guests):
Corporate Plan 10Paid before or on 17 May 2013 4 €7,040
Paid on or after 18 May 2013 4 €7,850
Corporate Plan 11-20Paid before or on 17 May 2013 4 €13,100
Paid on or after 18 May 2013 4 €14,545
Corporate Plan 21-30Paid before or on 17 May 2013 4 €18,690
Paid on or after 18 May 2013 4 €20,600
*For corporate plans, an additional form will be faxed to you once the registration department receives
your application. You should complete details about each delegate in your plan and return the form to the
registration department. 7. ADDITIONAL LUNCH TICKETS: (for non-delegates)Included with full Delegate registrations.
Tuesday 4 June 2013 4 €50
Wednesday 5 June 2013 4 €50
Thursday 6 June 2013 4 €50
8. CONFERENCE PROCEEDINGS: POWER-GEN Europe and Renewable Energy World Europe combined conference proceedings 4 €350
9. TECHNICAL TOURS:Tour 1: 3 June 2013 Wien Energie 4 €90 Other tours to be announced See event website for details www.powergeneurope.com
Passport number Please note that passport number will be required for power plant tours
4
4
4
REGISTRATION FORM4 - 6 June 2013
Messe Wien, Vienna, AustriaPLEASE USE THIS CODE WHEN REGISTERING
Entrance
..
.
.
EntranceEntrance
A100
KIMAECHTZEITSYSTE
ME GMBH
A1005
DAVIDBROWNGEAR
SYSTEMS
A1009
SAI
A1015
JOHNSONMATTHEY
A1019
FRANKEINDUSTRIE AG
A1027
REMAZELENGINEERING
SPA
A1033
THERMOFLOW INC
A1037
AUMARIESTERGMBH &CO. KG
A1043
POWER MACHINES
A1047
TECHNOPROMEXPORT, JSC
A105
AYVAZ (HACI AYVAZEND.MAM.SAN.ve TIC. A.S)
A1053
CMIENERGY
A1061
METSO POWER OY
A107
SE PlantELECTROTYAZHMASH
A1071
ExxonMobil
A1105
GIL
A111
Zeeco Europe Ltd.
A1115
KESZGROUP
A1119
FLSMIDTHWADGASSEN
GMBH
A112
HärtereiGerster
A1127
Reserved
A113
TLT-Babcock
Europe, Kft.
A1132
ESSCANOPOWER A/S
A1137
FUELTECHSRL
A1153
BFIAUTOMATION
A117
L-3 MAPPS
A118
TECHNETICS GROUP
A122
IonbondAG A123
GLAUNACHGMBH VENTSILENCERS
A1233
TESI SRL
A124
JASCINSTALLATI
ONS
A1242
RAFAKOS.A.
A1260
ENPRO
A1264
ARINC
A127
GIL
A1270
Daher – Verdelet –Vanatome
A1272
CIMTAS A.S.
A1304
BEIJING TOP FAIRSINTERNATIONAL
A1316
ZollernGmbH & Co.
KG
A132
CALLENSVYNCKE N.V.
A1320
ALLENGEARS
A133
SCOREENERGY
LTD
A1343
BEUMERGroup
GmbH &Co. KG
A136
PROENERGY SERVICES
A1360
HKBKETELBOUW
BV
A137
CHROMALLOY
A1371
DRESSER-RAND
A1405
Coen Company,Inc. / Hamworthy
Combustion
A1409
HyosungGoodsprings
A1415
ENERGOMASH(BELGOROD)-BZEM
JSC
A1419
SOLBERGINTERNATIONAL
LTD
A1425
PENTOLGMBH
A143
Siterm ISISistemleri
(Siterm HeatSystems)
A1430
ToshibaCorporation
A1434
ANDRITZ Pumps
A1443
AMMTechA1445
Rosatom
A1452
ENERGOPROJEKTKATOWICE SA
A146
VKKSTANDARD
KESSELKOETHEN
GMBH
A1461
TURBINETECHNICS, INC.
A1463
YOKOGAWAEUROPE BV
A147
Turbine Bladingand Parts
A150
BELDICKAUTOMATI
ON B.V.
A1505
GI&E SPAA1509
Endress+HauserMesstechnik GmbH+Co.
KG
A1515
FlandersCorporation
Europe, MiddleEast and Africa
A1519
DEKOMTE de TempleKompensator-Technik
GmbH
A152
ENTRE
A1524
BRADENMANUFACTURING
A153
STEAGENERGY
SERVICESGMBH
A1531
M-CTI MUMMECOOLING TOWERINTERNATIONAL
GMBH
A1537
Camfil FarrPower
Systems AB
A1543
GIL
A1553
DAIDO METALCO., LTD
A1555
Reserved
A1561
FRITERM TERMIKCIHAZLAR SAN VE
TIC AS
A1563
LU-VE SPA
A157
HAUK & SASKOGMBH
A1571
NEM Energy b.v
A160
CLARKRELIANCE
CORPORATION A161
KRAL AG
A164
BROMFORDINDUSTRIE
S -ALCESTER
LIMITED
A168
DREHMOGMBH
A170
BuffaloPumps
A1704
BBM AKUSTIKTECHNOLOGIE
GMBH
A1708
AumundGroup
A1709
HOERBIGER- Altronic
A171
YOUNG & FRANKLIN INC.
A1710
Kotloturboprom Ltd., Must-Ipra Corporation
A1714
KINGSBURYINC
A1720
CZECHPAVILION
A1732
WORLDLOGISTICSSERVICES
CORP
A1736
FRANCO TOSIMECCANICA
SPA
A1742
Turbomach SA
A1752
FOSTER WHEELER
A1760
WARTSILAFINLAND OY
A1770
STF SPA, Burmeister & WainEnergy A/S
A1783
STEJASA. AGREGADOSINDUSTRIALES,S.A.
A1800
SEIRIS
A1801
LAZARO ITUARTEINTERNACION S.A. -
VALVOSPAIN GROUP
A1805
METACORINTERNATIONAL INC
A1807
FURNACEMINERAL
PRODUCTSINC.
A181
ERC GMBH
A1811
APPACONSULT
GMBH
A1815
Hilliard Corporation,The
A1821
FANS A.S.A1825
GLOBALTECH
SERVICES
A1829
NORDICTURBINE
COMPONENTS
A183
McHalePerformance
A1833
SEIKOFLOWCONTROL
A1836
GFM Srl (socio Unico) aGandini Holding SpA
Company
A1843
Loibl Allen-Shermann-HoffGmbH and Diamond Power
Specialty Ltd.
A1849
WARTSILA SERCKCOMO GMBH
A1853
Philadelphia Gear, aTimken Brand
A1855
INNOVATIVE STEAMTECHNOLOGIES
A1861
AALBORGENGINEERING AS
A1883
VAG-Armaturen
GmbH
A1902
BAXENGINEERING GMBH
A1904
Nol-TecEurope Srl
A1910
SimTechGmbH A1913
FLOWSERVE GESTRA
A1919
A.D. TUBIINOSSIDABI
LI SPA
A1921
PENSOTTIFCL SPAA1924
SAMPISpA
A1925
EMCOCONTROLS
A/S
A1933
IBAUHAMBURGINGENIEURGESELLSC
HAFTINDUSTRIEBAU MBH
A1937
CEMBSPA
A1947
IIGINDUSTRIEISOLIERUNG
A1949
CORMETECH INC
A1959
DE JONGCOMBUSTI
ONB.V./R&V
ENGINEERING B.V.
A1963
DIESEL &GAS
TURBINEWORLDWID
A1965
RetubeCo,Inc.
A1971
PEERLESSEUROPELIMITED
A1981
TTTECHCOMPUTER
TECHNIK
A1982
LOESCHE
A201
CHENTRONICSCORP
A207
Rota Muhendislik Makina veInsaat San. Ve Tic.Ltd.Sti.
¢ExxonMobil ........................................................................... A1071¢FAIST Anlagenbau GmbH......................................................B3765¢FAMET .................................................................................... A314¢FANS, a.s. ............................................................................. A1821¢FATA EPC, Division of FATA S.p.A. ........................................B2069¢FIAV L. MAZZACCHERA SPA .................................................. A504¢Fives Pillard ...........................................................................B3520¢Flender-Graffenstaden ...........................................................B2181¢Flowserve Gestra .................................................................. A1913¢FLSmidth .............................................................................. A1119¢FME - Supported by DGTA....................................................B3349¢FMT Group ............................................................................B2447¢Foster Wheeler Global Power Group ..................................... A1752¢FRANCO TOSI MECCANICA SPA ......................................... A1736¢Franke Industrie AG ................................................................. A616¢Franke-Filter GmbH ............................................................... A1019¢FRENCH PAVILION ...............................................................B3005¢FRİTERM TERMİK CİHAZLAR SAN. VE TİC. A.İ. ................... A1561¢Fuel Tech Srl.......................................................................... A1137¢FURNACE MINERAL PRODUCTS INC. ................................. A1807¢G.I.& E. S.p.A. ....................................................................... A1505¢Gas Turbine Controls Corporation .........................................B3643¢Gas Turbo Technology ...........................................................B2104¢GE JENBACHER ..................................................................... A470¢GEA Heat Exchangers GmbH ...............................................B3270¢GENERAL TURBO ................................................................B2904¢GenerPro AB .........................................................................B2709¢GF Piping Systems ................................................................B2037¢GFM Srl (Socio Unico) a Gandini Holding Spa Company ....... A1836¢Glaunach GmbH Vent Silencers .............................................. A123¢¢Global Power Review ........................................................C4005¢GLOBAL TECH SERVICES.................................................... A1825¢Greenbank Group UK Limited, The .......................................B2533¢Güntner AG & Co. KG ............................................................. A814¢H+H Umwelt und Industrietechnik GmbH ..............................B2100¢Haldor Topsoe .......................................................................B3543¢HAMON ................................................................................B3343¢HanzaPrecision AB ................................................................ A1829¢HAUK & SASKO GMBH .......................................................... A157¢Haynes International Inc. .......................................................B2080¢Heliex Power .........................................................................B2332¢HIAK AB ................................................................................B2005¢Hilliard Corporation, The ....................................................... A1815¢HIMA Paul Hildebrandt GmbH + Co KG ................................B3463¢Hitachi Power Europe GmbH ................................................B2453¢HKB KETELBOUW BV .......................................................... A1360¢HOERBIGER - Altronic .......................................................... A1709¢Hoesch Schwerter Profile GmbH ............................................ A504¢HSB Global Standards ............................................................ A453¢HYDAC International GmbH ..................................................B2027¢¢Hydro Review....................................................................C4005¢Hydro Richier ........................................................................B2106¢¢HydroVision International ...................................................C4005¢Hyosung Goodsprings .......................................................... A1409¢Hy-Pro Filtration ....................................................................B2204¢IBAU HAMBURG ................................................................... A1933¢IHI Corporation ......................................................................B3309¢IIG Industrieisolierungen GmbH ............................................. A1947¢Imtech Deutschland GmbH & Co. KG ..................................... A243¢INDAR ..................................................................................... A636¢Independent Forgings & Alloys Ltd. ......................................... A837¢Industrial Info Resources, Europe Ltd. ...................................B2015¢Innovative Steam Technologies (IST) ...................................... A1855¢INP Deutschland GmbH ........................................................B2443¢Inpro/Seal® ...........................................................................B2980¢Ionbond AG............................................................................. A122¢ISOPur Fluid Technologies, Inc. .............................................B3080¢Jasc Installations ..................................................................... A124¢Jean Gallay S.A. ....................................................................B2781¢Jeffrey Rader AB ...................................................................B2721¢JEUMONT Electric ................................................................B2914¢John Cardwell Limited ............................................................. A309¢John Crane ...........................................................................B2063
¢Johnson Matthey Catalysts (Germany) GmbH ....................... A1015¢JSC ELEM (Macedonian power plants) ..................................B3333¢KAEFER Isoliertechnik GmbH & Co. KG ................................B2108¢Kawasaki Gas Turbine Europe GmbH ....................................B2055¢KESZ GROUP ....................................................................... A1115¢Kingsbury, Inc........................................................................ A1714¢KLEVERS ITALIANA s.r.l. .......................................................B3751¢KOREA .................................................................................B3639¢Kotloturboprom Ltd., Must-Ipra Corporation ......................... A1710¢Kraftanlagen München GmbH ...............................................B3244¢KRAFTWERKSSCHULE E.V. .................................................C4348¢KRAL AG ................................................................................ A161¢KROHNE Gesellschaft m.b.H. ...............................................B3022¢KSB Aktiengesellschaft ........................................................... A942¢KUZU FLEKS METAL HORTUM SAN.TIC.A.S. ......................B3701¢L-3 MAPPS ............................................................................. A117¢LANGSON ENERGY INC ......................................................C4070¢LAZARO ITUARTE INTERNACION S.A. - .............................. A1801 ¢VALVOSPAIN GROUP ¢LBH International A/S ............................................................B2305¢Leslie Controls, Inc. ................................................................. A660¢Lindner Insulation Engineering and Industrial Services ............. A227¢Lloyd’s Register .....................................................................B3042¢Loesche Energy Systems Ltd. ............................................... A1982¢Loibl Allen-Shermann-Hoff GmbH and Diamond Power ........ A1843 Specialty Ltd.¢Lufkin France .......................................................................... A933¢LUVATA SODERKOPING AB ................................................... A261¢LU-VE Spa ............................................................................ A1563¢M&M Forgings ......................................................................... A265¢M+M Turbinen-Technik GmbH ...............................................B3363¢Magaldi Power SpA ...............................................................B3662¢MAIN METALL INTERNATIONAL GMBH ...............................B2021¢Major Tool & Machine, Inc. ....................................................B2082¢MAN Diesel & Turbo SE .........................................................B3371¢Maxon International BVBA .....................................................C4243¢McHale Performance ............................................................... A183¢M-CTI Mumme-Cooling Tower International GmbH ............... A1531¢Mee Industries, Inc. ...............................................................B3242¢Meggitt Control Systems ......................................................... A946¢METACOR INTERNATIONAL INC .......................................... A1805¢METKA S.A. ..........................................................................B2714¢MetroBilling ............................................................................. A305¢METSO AUTOMATION INC. .................................................. A1061¢Metso Power Oy ................................................................... A1061¢Michell Bearings ...................................................................... A282¢Ministry of Energy of the Russian Federation .........................B3339¢Mitsubishi Power Systems Europe, Ltd. ................................B3670¢MJB International Ltd .............................................................. A810¢Moog GmbH ........................................................................... A413¢Morgan Schaffer Inc. .............................................................B2856¢MUHR GMBH .......................................................................B3133¢Nalco Mobotec .....................................................................B2929¢National Electric Coil..............................................................B3757¢NEM Energy b.v. ................................................................... A1571¢Nießing Anlagenbau GmbH ...................................................B3461¢NIRONIT Edelstahlhandel GmbH & Co. KG ...........................B2729¢Nol-Tec Europe Srl ................................................................ A1904¢Nooter Eriksen Srl ................................................................... A747¢Nordic Turbine Components .................................................. A1829¢Nord-Lock GmbH .................................................................B3021¢Northern Technical LLC ........................................................... A833¢¢Nuclear Power International ..............................................C4005¢OBO BETTERMANN GmbH & Co. KG ..................................B2604¢OELCHECK GmbH ...............................................................B2821¢Opra Turbines........................................................................B3349¢Oschatz GmbH .....................................................................B2421¢OUTOTEC OYJ ....................................................................... A914¢Parker Hannifin Europe Sàrl ..................................................... A427¢PATIG GmbH.........................................................................B2349¢PCC Energy Group ................................................................. A743¢Peerless Europe Limited ........................................................ A1971¢PennEnergy...........................................................................C4445
¢Pensotti FCL S.p.A. ............................................................... A1921¢Pentol GmbH ........................................................................ A1425¢Philadelphia Gear, a Timken Brand ........................................ A1853¢PHOENIX CONTACT Deutschland GmbH .............................B2427¢PLARAD - Maschinenfabrik Wagner GmbH & Co. KG ...........B2682¢Plasticon Europe B.V. ............................................................C4167¢PLASTOCOR-INTERNATIONAL SA .......................................B2009¢POLFIN Sp. j. ........................................................................C4867¢¢Power Engineering ............................................................C4005¢¢Power Engineering International ........................................C4005¢Power Machines ................................................................... A1043¢¢POWER-GEN Africa ..........................................................C4005¢¢POWER-GEN Asia ............................................................C4005¢¢POWER-GEN Europe........................................................C4005¢¢POWER-GEN India & Central Asia ....................................C4005¢¢POWER-GEN International ................................................C4005¢¢POWER-GEN Middle East ................................................C4005¢¢POWERGRID International magazine ................................C4005¢Prangl Gesellschaft m.b.H. ....................................................C4181¢Pratt & Whitney Power Systems ............................................B3545¢PRATT & WHITNEY ROCKETDYNE.......................................C4366¢PRECISION ICEBLAST CORPORATION .................................. A212¢ProEnergy Services ................................................................. A136¢PRÜFTECHNIK Alignment Systems GmbH ...........................B3014¢PSEC Power Solution Engineering & Consulting GmbH .........B2236¢Quartzelec Ltd ......................................................................... A443¢RAAL SA ...............................................................................C4666¢Rafako S.A. ........................................................................... A1242¢Recotech AB ......................................................................... A1829¢REINTJES GmbH ..................................................................B2952¢Reko Praha a.s........................................................................ A315¢REMAZEL ENGINEERING SpA ............................................. A1027¢REMMING D.O.O. ................................................................... A302¢¢Renewable Energy World ..................................................C4005¢¢Renewable Energy World Asia ..........................................C4005¢¢Renewable Energy World Conference & Expo North America C4005¢¢Renewable Energy World Europe ......................................C4005¢¢RenewableEnergyWorld.com ............................................C4005¢RetubeCo, Inc. ...................................................................... A1965¢RFF ROHR FITTING HANDLES GMBH ..................................B2543¢Richter Cooling Systems GmbH ............................................B2501¢Rolls-Royce PLC ..................................................................... A953¢Rota Muhendislik Makina ve Insaat San. Ve Tic.Ltd.Sti. ........... A207¢Rubber Design B.V. ...............................................................B3745¢¢Russia Power ....................................................................C4005¢RWE Technology GmbH ........................................................B2355¢S.C. VULCAN S.A. ................................................................B2852¢SAI ........................................................................................ A1009¢SAMPI – Liquid Controls Group An IDEX Fluid & ................... A1924 Metering Business¢SANBORN A.S. .....................................................................B2205¢SAR – Prozess- und Umwelttechnik .....................................B2327( SAR – Environmental Technology)¢Saudi Aramco .......................................................................B2232¢Schenck Process ..................................................................B2405¢Schwarze - Robitec GmbH ..................................................... A417¢SCORE ENERGY LTD ............................................................. A133¢SE Plant ELECTROTYAZHMASH ............................................ A107¢Sealeze, A Unit of Jason Incorporated ...................................B2601¢SEGEM MACBO ...................................................................B2723¢Seiko Flowcontrol .................................................................. A1833¢SEIM Srl Italy .........................................................................B2608¢SEIRIS ................................................................................... A1800¢SEKO Aerospace a.s. ............................................................C4043¢SENSOPLAN GmbH ............................................................... A632¢Seonghwa Industrial Co., Ltd. ...............................................B2321¢SES AS TLMACE .................................................................... A910¢SHW Storage & Handling Solutions GmbH ............................B2920¢SICA SPA ................................................................................ A405¢SICK GmbH ..........................................................................B3329¢Siemens AG Energy Sector ...................................................B2469¢SimTech GmbH ..................................................................... A1910¢SIPOS Aktorik GmbH .............................................................. A926
¢Siterm ISI Sistemleri (Siterm Heat Systems) ............................. A143¢Solberg International, Ltd. ..................................................... A1419¢SPETECH SP. Z O.O. ............................................................B2880¢SPIG SpA ..............................................................................B3769¢SSS Gears Ltd. .....................................................................B3049¢Standardkessel Baumgarte Group .........................................B2655¢STEAG Energy Services GmbH ............................................... A153¢Stejasa Agregados Industriales,S.A. ...................................... A1783¢STELLBA SCHWEISSTECHNIK AG ....................................... A303 (STELLBA HARDFACING LTD.)¢Sterling SIHI GmbH ...............................................................B3052¢STF SPA................................................................................ A1770¢STRABAG Energy Technologies GmbH .................................B2537¢Sulzer Turbo Services Venlo BV ............................................... A604¢SWAN Systeme AG ...............................................................C4459¢TECHNETICS GROUP ............................................................ A118¢TESI s.r.l. ............................................................................... A1233¢Texas OilTech Laboratories, Inc. ............................................B3749¢TGM Kanis Turbinen GmbH ...................................................B2273¢Thermoflow Inc. .................................................................... A1033¢THERMOPROZESS Wärmebehandlungsservice GmbH ........B2653¢TIG Group GmbH ..................................................................B3243¢TLT-Babcock Europe, Kft......................................................... A113¢TMS TURBOMASCHINENSERVICE GMBH ..........................B2763¢Torraval Cooling S.L. .............................................................B3504¢Toshiba Corporation .............................................................. A1430¢TPC Components AB ............................................................ A1829¢TRANSFLUID SRL .................................................................B3605¢TransGlobal Energy Inc. .........................................................B2208¢Transmission Technology ......................................................B3048¢TRIVENI TURBINE LIMITED ..................................................... A961¢TTTech Computertechnik AG ................................................ A1981¢Turbine Blading and Parts LLC ................................................ A147¢Turbine Technics, Inc. ............................................................ A1461¢TURBINES & DIESELS ..........................................................B2701¢TURBO MACHINED PRODUCTS ............................................ A308¢TURBODEN S.R.L. ................................................................B3545¢Turbomach SA ...................................................................... A1742¢TÜV NORD Group .................................................................B2800¢TÜV Rheinland Group ............................................................B2922¢TÜV SÜD ..............................................................................B2251¢United Conveyor Corporation .................................................. A904¢UT 99 AG ..............................................................................B2000¢VAG-Armaturen GmbH .......................................................... A1883¢VBR Turbine Partners ............................................................B3349¢VDMA Power Systems ..........................................................B2371¢VENTURI CALIBRATION SERVICES (VCS) ............................ A1833¢Victaulic.................................................................................B2415¢VKK Standardkessel Köthen GmbH ........................................ A146¢Voith Turbo BHS Getriebe GmbH ..........................................B2463¢Voith Turbo GmbH & Co. KG .................................................B2463¢Voith Turbo Safeset AB ..........................................................B2463¢VTT TECHNICAL RESEARCH CENTRE OF FINLAND ...........B3317¢WAGENBORG NEDLIFT BV .................................................... A806¢Walter Meier (Klima Deutschland) GmbH ...............................B2626¢Wärtsilä ................................................................................. A1760¢Wärtsilä Serck Como GmbH ................................................. A1849¢Waukesha Bearings...............................................................B2980¢Weidmüller Interface GmbH & Co. KG ...................................B2336¢Weir ........................................................................................ A437¢Welland & Tuxhorn AG ..........................................................B3263¢Wood Group GTS ................................................................... A253¢World Logistics Services Corp. .............................................. A1732¢World Nuclear Association ....................................................... A312¢WSP Industry ........................................................................B2309¢YARA GMBH CO. KG .............................................................. A804¢Yokogawa Europe B.V ........................................................... A1463¢Young & Franklin Inc. ............................................................... A171¢Ytstruktur Arboga AB ............................................................ A1829¢Zeeco Europe Ltd. .................................................................. A111¢ZOK International Group Ltd .................................................... A455¢Zollern BHW Gleitlager GmbH & Co. KG ............................... A1316
Key: ¢POWER-GEN Europe ¢Renewable Energy World Europe Key: ¢POWER-GEN Europe ¢Renewable Energy World Europe
RUSSIAN ENERGY MINISTRY SEMINARRUSSIA – PROSPECTS FOR DEVELOPMENT OF THE POWER INDUSTRYTuesday 4 June, 14:00 – 17:30 Strauss 2-3, First Floor, Congress Center, Messe Wien Host: Ministry of Energy of Russian Federation Open to all attendees
14:00 – 15:30
Russia – Prospects and Investment Potential For The Future Development of Smart Energy
Key discussion issues:• Smart grids – platform of Russian innovative economy • The prospect of UES Russia • Implementation and development of the state policy in the field of energy saving and energy efficiency • The relevance of global changes in energy. • Financing of energy efficiency projects: new challenges and new tools
15:30 – 16:00 - Delegate Coffee Break
16:00 – 17:30
European Experience of The Transition From Conventional Sources to Renewable Energy. State Regional Support Programs For Small Business Development In The Energy Sector
Key discussion issues:• European legislative model of transition to renewable energy • European financial model of transition to renewable energy • State policy and legislation in the field of renewable energy: International Experience and Russian Reality • Experience of international banks in financing of projects and programs in renewable energy sector • Financial tools for energy efficiency projects implementation in Russia. • Experience of state-private partnership
Please note: The conference programme is subject to change. Please visit the conference page on www.powergeneurope.com for future updates