Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com 43 KDL/EMV cable entry system
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com 43
KDL/EMV cable entry system
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com44
Advantages
KDL/EMV cable entry system
Discharge sheath currents
The KDL-EMV is a cable entry system made of plastic with a metallized surface.This plate can be used as a trouble-free way to discharge sheath cur-rents from electromagnetic cable shielding.The KDT/Z-EMV cable entry grommet uses a fitted metal braiding to achieve the connection between the cable shielding and the cable entry system.An alternative opportunity to dis-charge sheath currents comes through an additional discharge plate that can mounted onto the existing drilling pattern.
✔ Easy assembly
✔Large cut-out
✔ Variable
✔ No additional parts required
✔ No extra mounting effort required
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com 45
Overview
Page 49 Cable entry systemType KDL24/x-EMV KDL metallized for cut-outs for 24-pole connectors e.g. Harting or Wieland.
Cable entry grommetType KDT/Z-EMVKDT with metal mesh insert for cable insertion with simultaneous discharge of sheath currents.
Page 51
Cable entry systemType KDL16/x-EMVKDL metallized for cut-outs for 16-pole connectors e.g. Harting or Wieland.
Page 48
Cable entry systemType KDL 2/10-EMVCable entry system metallized for 10 cable entry grommets.
Page 50
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com46
Selection table
KDL/EMV cable entry system
Cable entry grommets
Type KDT/Z-EMV
Cable diameter Cable diameter
0.12 - 0.63 inch(3 - 16 mm)
0.63 - 1.14 inch(16 - 29 mm)
Cable entry system Order no. Opening, small Opening, large
KDL 16/2-EMV 87171020 0 2
KDL 16/4-EMV 87171022 4 0
KDL 24/3-EMV 87171024 1 2
KDL 24/5-EMV 87171026 5 0
KDL 2/10-EMV 87171027 10 0
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com 47
Type Material
Temperature
Fire
cla
ssifi
catio
n UL
94
RoHS
Com
plia
nt
Halo
gen-
free
Phos
phor
ous-
free
Cadm
ium
-fre
e
Asbe
stos
-fre
e
Lead
-fre
e
Silic
one-
free
Min
.
Max
.
KDL 16/x-EMVPolyamide with conductive
coating-40 °F 257 °F VO ✔ ✔ ✔ ✔ ✔ ✔ ✔
KDL 24/x-EMVPolyamide with conductive
coating -40 °F 257 °F VO ✔ ✔ ✔ ✔ ✔ ✔ ✔
KDL 2/10-EMVPolyamide with conductive
coating -40 °F 257 °F VO ✔ ✔ ✔ ✔ ✔ ✔ ✔
KDT/Z-EMVThermoplastic rubber with
conductive textile tape-40 °F 176 °F HB ✔ ✔ ✔ ✔ ✔ ✔ ✔
Material data
** = not certified
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com48
2.28(58)
4.57(116)
0.63(16)
0.63(16)
1.42(36)
2.03(51.5)
2.03(51.5)
3.39(86)
(5.5)Ø 0.22
Cable entry system, type KDL 16/x-EMV
The cable entry system KDL/EMV is based on the cable entry system KDL. A conductive surface allows cable sheath interference to be discharged onto the control cabinet simply and without additional aids.Field-related interferences are discharged by the metallization.Suitable for standard cut-out 16-pole connectors from Harting or Wieland, for example.
-40 to 257 °F
Polyamide with conductive coating
V0
KDL 16...-EMV
Type Order no. Color No. of openings Installation height Packsmall / large inch qty
KDL 16/2-EMV 87171020 chrome - / 2 0.39 1KDL 16/4-EMV 87171022 chrome 4 / - 0.39 1
Replacement parts:Replacement seal KDL16-EMV 8717102100 1
Matching grommetsKDT/Z-EMV; ATG-EMV; BTK 17; BTG 32
Matching label plate (See ACS catalogue):Type KSS 20 x 9 or KSS 10 x 8
The right tool for cut-out productioncan be found in the chapter «Punching tools»
KDL/EMV cable entry system
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com 49
2.28(58)
5.75(146)
0.63(16)
0.63(16)
1.42(36)
2.56(65)
2.56(65)
4.41(112)
(5.5)Ø 0.22
Cable entry system, type KDL 24/x-EMV
The cable entry system KDL/EMV is based on the cable entry system KDL. A conductive surface allows cable sheath interference to be discharged onto the control cabinet simply and without additional aids.Field-related interferences are discharged by the metallization.Suitable for standard cut-out 24-pole connectors from Harting or Wieland, for example.
-40 to 257 °F
Polyamide with conductive coating
V0
KDL 24...-EMV
Type Order no. Color No. of openings Installation height Packsmall / large inch qty
KDL 24/3-EMV 87171024 chrome 1 / 2 0.39 1KDL 24/5-EMV 87171026 chrome 5 / - 0.39 1
Replacement parts:Replacement seal KDL24-EMV 8717102500 1
Matching grommetsKDT/Z-EMV; ATG-EMV; BTK 17; BTG 32
Matching label plate (See ACS catalogue):Type KSS 20 x 9 or KSS 10 x 8
The right tool for cut-out productioncan be found in the chapter «Punching tools»
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com50
3.54(90)
5.75(146)
1.28(32.5)
1.28(32.5)
2.17(55)
2.56(65)
2.56(65)
4.41(112)
(5.5)Ø 0.22
Cable entry system, type KDL 2/10-EMV
The cable entry system KDL/EMV is based on the cable entry system KDL. A conductive surface allows cable sheath interference to be discharged onto the control cabinet simply and without additional aids.Field-related interferences are discharged by the metallization.Larger cut-outs can be used to pass through up to 10 wires with large plugs.
-40 to 257 °F
Polyamide with conductive coating
V0
KDL 2/10-EMV
Type Order no. Color No. of openings Installation height Packsmall / large inch qty
KDL 2/10-EMV 87171027 chrome 10 / - 0.39 1
Replacement parts:Replacement seal 87980020 1
Matching grommets:KDT/Z-EMV; BTK17
Matching label plate (See ACS catalogue):Type KSS 20 x 9 or KSS 10 x 8
The right tool for cut-out productioncan be found in the chapter «Punching tools»
KDL/EMV cable entry system
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com 51
Cable entry grommets, type KDT/Z-EMV
The cable entry grommet KDT/Z-EMV is a grommet adapted to the sheath diameter with a conductive textile tape to discharge interferences to the control cabinet.Strain relief can be provided quickly and easily for cables from a diameter of 0.39 inch using cable ties.
-40 to 176 °F
Thermoplastic rubberwith conductive textile tape
HB
KDT/Z-EMV...
Type Order no. Color for sheath of Ø for opening No. Packinch small / large Openings qty
Grommet, smallKDT/Z-EMV 03 87171812 black 0.12 - 0.16 l / - 1 10KDT/Z-EMV 04 87171814 black 0.16 - 0.20 l / - 1 10KDT/Z-EMV 05 87171816 black 0.20 - 0.24 l / - 1 10KDT/Z-EMV 06 87171818 black 0.24 - 0.28 l / - 1 10KDT/Z-EMV 07 87171820 black 0.28 - 0.31 l / - 1 10KDT/Z-EMV 08 87171822 black 0.31 - 0.35 l / - 1 10KDT/Z-EMV 09 87171824 black 0.35 - 0.39 l / - 1 10KDT/Z-EMV 10 87171826 black 0.39 - 0.43 l / - 1 10KDT/Z-EMV 11 87171828 black 0.43 - 0.47 l / - 1 10KDT/Z-EMV 12 87171830 black 0.47 - 0.51 l / - 1 10KDT/Z-EMV 13 87171832 black 0.51 - 0.55 l / - 1 10KDT/Z-EMV 14 87171834 black 0.55 - 0.59 l / - 1 10KDT/Z-EMV 15 87171836 black 0.59 - 0.63 l / - 1 10Grommet, largeKDT/Z-EMV 16 87172012 black 0.63 - 0.67 - / l 1 10KDT/Z-EMV 17 87172014 black 0.67 - 0.71 - / l 1 10KDT/Z-EMV 18 87172016 black 0.71 - 0.75 - / l 1 10KDT/Z-EMV 19 87172018 black 0.75 - 0.79 - / l 1 10KDT/Z-EMV 20 87172020 black 0.79 - 0.83 - / l 1 10KDT/Z-EMV 21 87172022 black 0.83 - 0.87 - / l 1 10KDT/Z-EMV 22 87172024 black 0.87 - 0.91 - / l 1 10KDT/Z-EMV 23 87172026 black 0.91 - 0.94 - / l 1 10KDT/Z-EMV 24 87172028 black 0.94 - 0.98 - / l 1 10KDT/Z-EMV 25 87172030 black 0.98 - 1.02 - / l 1 10KDT/Z-EMV 26 87172032 black 1.02 - 1.06 - / l 1 10KDT/Z-EMV 27 87172034 black 1.06 - 1.10 - / l 1 10KDT/Z-EMV 28 87172036 black 1.10 - 1.14 - / l 1 10
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com52
Cable entry grommets, type KDT/Z-EMV
Type Order no. Color for sheath of Ø for opening No. Packinch small / large Openings qty
Adapter grommetATG-EMV (adapter grommet) 87172040 black - / l 1 10
Grommets match: KDL 16/xx-EMV; KDL 24/xx-EMV; KDL 2/10-EMV
KDL/EMV cable entry system
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com 53
KSS
4x
Assembly
Strip wire at the insertion point and lay into grommet (suitable for diameter at the shielding braid). Use cable ties for strain relief where necessary (from 0.39 inch diameter).
Where required, install small sleeves into the adapter grommet.
Insert grommet completely. Fill in empty spaces with dummy grommets.
Join upper and lower part of frame. Fasten with the side screws.
Position housing on cut-out and fasten. Ensure good contact between rail and control cabinet panel.
Murrplastik Systems Inc. l 2367 North Penn Road l Suite 200 l Hatfield, PA 19440 l A 215-822-7625 l E 215-822-7626 l [email protected] l www.murrplastik.com54