www.intra-lighting.us M: 1.647.891.4414 T&F: 1.888.560.5885 e-mail: [email protected] Project: Type: QTY: KALIS RI trimless linear, recessed mounted fluorescent fixtures FIND IT ONLINE: http://www.intra-lighting.com/luminaries.aspx?catid=1107 USE THIS CHART FOR INDIVIDUAL FIXTURES ONLY, FOR CONTINUOUS RUNS SEE KALIS LINE. 1. Body: From extruded aluminium profile with polycarbonate end-caps; anodised or white color (powder coated) 2. Control gear: Electronic ballast (universal voltage 120/277V) or dimmable ballast (ECO system, Hi-Lume 3D) 3. Optics: Satin aluminium optics for enhanced light output efficiency. Anti-dust protection stretch film. 4. Lamps: One T5 or T5 HO in cross-section. Double lamp versions available only with T5 seamless lamps for continuous light line without dark spots. Fixture lengths and lamping are as noted on next page (consult factory for other lengths). Luminaries are delivered with lamps upon request upon request 5. Diffuser: Opal blend (GL) or microprismatic (PR) diffuser made of polycarbonate, glow wire test 850°C. 6. RI installation kit Pre-installation trimless accessory provides fast and clean fixture mounting, ready for false ceilings. The RI kit is designed for ½ inch false ceiling cross-section Description 1 6 2 3 4 5 Optics Ceiling type Ballast Light source Length Direct lamp power Indirect lamp power Color 47 27 - GL opal diffuser - PR - microprismatic diffuser 0 - 5/8” 5 - 1/2” 4 - Electronic 120-277V 5 - ECO system Lutron 6 - HI Lume 3D Lutron 1 - Linear fluorescent 1 - Single lamp 2 - Double lamp (seamless lamp only) 7 - 21W, T5 9 - 39W, T5 1 - 28W, T5 4 - 54W, T5 2 - 35W, T5 0 - Without indirect component 1 - White 2 - Black 6 - Anodised Notes - Dimmable ballasts (ECO system, Hi Lume 3D) available only for T5 lamps 21W, 39W, 28W and 54W - Double lamp length version are available only with T5 seamless lamps 1U3. 1 0 Optics Ceiling type Ballast Light source Length Direct lamp power Indirect lamp power Color