Features & Benefits Wide Range of Applications – Protocol Testing for Development, Operation and Maintenance with More than 100 Protocols Software for Monitoring, Simulation/Emulation and Conformance Tests Covers the Range From Legacy Access Technologies such as ISDN and V5.1/V5.2 Through Technologies Like SS7, In and IP to Mobile Technologies Like GSM/CDMA and Mobile Data Technologies Like GPRS, EDGE and UMTS Simultaneous Run of Different Applications Offers Interworking and Interoperability Tests Flexibility and Permanent Updated Software Packages Saves Your Investments All Technologies are Supported by a Common Set of Applications Provided by the K1205 and K1297-G20 Software Platforms K1297/K1205 Series Protocol Tester Application Software 2G GSM/PCS Software The Global System for Mobile Communication (GSM) is related to the 2nd Generation (2G) of Mobile Networks. From the rollout at the beginning of the 90’s it has become a world- wide accepted standard for digital mobile communication, preferred for speech and narrow band tele services (i.e. SMS). Tektronix offers the following software packages for the mobile network GSM for K1297/K1205 Protocol Testers. With its aid the functions of the GSM network elements Base Station Subsystem (BSS) and Network Switching Subsystem (NSS) and their interaction can be tested: GSM monitoring GSM monitoring/simulation/emulation SMS monitoring SMS monitoring/simulation Emulation of network elements MSC and BSS Emulation of network element SCP Abis post-processing software tool Prerequisite for GSM software packages is the related transport protocol SCCP (7PK12xx-xTCxx). The transport SCCP protocol packages 7PK1221-7TCxx offer the additional feature “TCAP Application Database” for the customer. Thereby database access of TCAP based protocols (i.e. MAP, CAP) with support of the programming tool “Message Sequence Chart (MSC)” can be realized. Tektronix offers now a complete range of monitoring applications for GSM protocols for the Subnetworks BSS and NSS on the K1205 and K1297-G20 and in addition for K1297- G20 the capability to simulate GSM protocols by using MBS and emulate important parts of network elements like MSC, BSS, HLR, VLR and SCP. 2G protocol packages can be com- bined with all transport protocol packages (SS#7, IP, ATM). Protocol Analyzers • www.tektronix.com 1 Other PLMN PDN SGSN GGSN GGSN SGSN BSS MT TE EIR HLR SM-SC MSC/VLR SMS-GMSC SMS-IWMSC TE E C A Gp Gd Gc D R Um Gn Gr Gi Gf Gn Gb Gs Signaling Interface Signaling and Data Transfer Interface GSM GPRS Other GPRS Reference Model.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Features & Benefits
Wide Range of Applications –Protocol Testing forDevelopment, Operation andMaintenance with More than100 Protocols
Software for Monitoring,Simulation/Emulation andConformance Tests
Covers the Range FromLegacy Access Technologiessuch as ISDN and V5.1/V5.2Through Technologies LikeSS7, In and IP to MobileTechnologies LikeGSM/CDMA and Mobile DataTechnologies Like GPRS,EDGE and UMTS
Simultaneous Run of DifferentApplications OffersInterworking andInteroperability Tests
Flexibility and PermanentUpdated Software PackagesSaves Your Investments
All Technologies areSupported by a Common Setof Applications Provided bythe K1205 and K1297-G20Software Platforms
K1297/K1205 Series Protocol TesterApplication Software
2G GSM/PCS Software
The Global System for Mobile Communication
(GSM) is related to the 2nd Generation (2G)
of Mobile Networks. From the rollout at the
beginning of the 90’s it has become a world-
wide accepted standard for digital mobile
communication, preferred for speech and
narrow band tele services (i.e. SMS). Tektronix
offers the following software packages for
the mobile network GSM for K1297/K1205
Protocol Testers. With its aid the functions
of the GSM network elements Base Station
Subsystem (BSS) and Network Switching
Subsystem (NSS) and their interaction can
be tested:
GSM monitoring
GSM monitoring/simulation/emulation
SMS monitoring
SMS monitoring/simulation
Emulation of network elements MSC and BSS
Emulation of network element SCP
Abis post-processing software tool
Prerequisite for GSM software packages is
the related transport protocol SCCP
(7PK12xx-xTCxx).
The transport SCCP protocol packages
7PK1221-7TCxx offer the additional feature
“TCAP Application Database” for the customer.
Thereby database access of TCAP based
protocols (i.e. MAP, CAP) with support of
the programming tool “Message Sequence
Chart (MSC)” can be realized.
Tektronix offers now a complete range of
monitoring applications for GSM protocols for
the Subnetworks BSS and NSS on the K1205
and K1297-G20 and in addition for K1297-
G20 the capability to simulate GSM protocols
by using MBS and emulate important parts of
network elements like MSC, BSS, HLR, VLR
and SCP. 2G protocol packages can be com-
bined with all transport protocol packages
(SS#7, IP, ATM).
Protocol Analyzers • www.tektronix.com1
Other PLMN
PDNSGSN
GGSN
GGSN
SGSN
BSSMTTE
EIR
HLR
SM-SC
MSC/VLR
SMS-GMSCSMS-IWMSC
TE
E C
A
Gp
Gd
GcD
R Um Gn
Gr
GiGf
Gn
Gb
Gs
Signaling Interface
Signaling and Data Transfer Interface
GSM
GPRS
Other
GPRS Reference Model.
K1297/K1205 Series Protocol TesterApplication Software
2.5G Mobile GPRSSoftware
GPRS is a GSM service that provides packet
switched data transmission to GSM users
by extending the standard circuit switched
GSM network with an overlaid packet
switched network.
Besides the Items in the following Ordering
Information Tektronix offers complete
test solutions:
GPRS Network Operator Packages
GPRS Interoperability, test solution for GPRS MS
Please refer to the corresponding sections below.
GPRS Network OperatorPackages
The GPRS network operator packages are the
enablers for a rapid and effective deployment
and operation of GPRS networks. They provide
a combination of hardware, monitoring and
analysis capability, simulation/emulation and
conformance testing, bundled with onsite
installation support, free hotline access, soft-
ware upgrade service and training. Four GPRS
Network Operator packages are offered. Three
packages (Basic, Medium, Premium) are
based on K1297-G20. They provide monitor-
ing, simulation and emulation functions as well
as capability of conformance and interoper-
ability testing chiefly needed during design
and installation/deployment of the network.
The fourth package (Monitoring) is based on
K1205. It delivers monitoring and analysis
functions needed during field trials, operation
& maintenance and network optimization.
Features For GPRS Network Operator Packages
Simultaneous monitoring on all interfaces (Ga, Gb, Gc, Gd, Gf, Gi, Gn, Gp, Gr, Gs)
Monitoring on Abis-interface (Alcatel, Ericsson,Lucent, Motorola, Nokia, Nortel, Siemens)
Real-time GPRS call trace capability on Gb-interface
Sufficient tools for analysis of received data (filter, trigger, statistics)
Monitoring, simulation and emulation for a widerange of standardized protocol versions
Simulation and emulation of all network elements (BSS, SGSN, GGSN, VLR, HLR)
Simulation of entire GPRS network switchingsubsystem (NSS)
Conformance and Interoperability Tests for BSS,SGSN and MS
Multiple tests for standardized GPRS procedure[Attach/detach (GPRS, IMSI, combined), locationarea update, intra routing area update, cell reselection, PDP context activation/modifica-tion/deactivation]
Traffic generation across the GPRS network for end-to-end diagnostics
Simulation of more than 1,000 subscribers (BSS or SGSN) per PRIME
Recording of errors and replay/reproduction in test networks
Inspecting QoS parameters
Remote capability for real-time analysis from a centralized location
Extensive service support
Package Componentsand Benefits
Simulation/Emulation of GPRS Network Elements
Create and emulate functioning network elements fortest purposes. Emulate multiple Network Elements(NE) in parallel to real NE for complex test scenar-ios. Compare reaction of emulated and real NE.
Home Location Register Emulation
Replace expensive Home Location Register
(HLR) in test network. Fault tolerant reaction.
Fast reset capability. Easily Parametrizeable.
Base Station Subsystem and Mobile Emulation
Emulate thousands of Mobiles (MS) on multi-
ple Base Station Subsystems (BSS) with one
K1297 Protocol Tester. By emulating MS
& BSS, you can find Network Switching
Subsystem (SGSN, GGSN, HLR, PDN)
problems.
Protocol Analyzers • www.tektronix.com2
Overview of the Four Packages
Package Hardware Software Service
Basic (K1297-G20) 2xPRIME Monitoring 2 days onsite installation support1x Ethernet Simulation 2 days training
1xAP4 Emulation 1 year SW upgrade serviceFree hotline access
Medium (K1297-G20) 2xPRIME Monitoring 2 days onsite installation support1x Ethernet Simulation 4 days training
K1297/K1205 Series Protocol TesterApplication Software
Network Switching Subsystem Emulation
Browse with a GPRS mobile on the Web
(HTML or WAP) by connecting a K1297
Protocol Tester to a BSS. Find BSS or Mobile
problems by reducing error possibilities by
emulating the complete Network Switching
Subsystem (NSS).
End-to-End Tests with GPRSMobiles connected via BSS
Ensure your subscriber satisfaction by check
data transmission and delay in test and
live networks.
Test your complete GPRS backbone with high
load from thousands of subscribers on multi-
ple BSS with automated call generation, data
transmission and statistics in test and live
networks.
Short Message Service Testing
Ensure Short Message Service (SMS) functionalityvia GPRS Gb and Gd Interface.
Integrated Test Functions inMobile/Base Station Subsystem
Fast and Easy Execution Of:
GPRS attach/detach
IMSI attach/detach
Combined GPRS/IMSI attach/detach
Location area updates
Routing area updates
Cell reselection
PDP Context activation/modification/deactivation
Transfer of IP data
Paging for CS and PS
Test Management System
The test management system “MiniTMS” is a
system for automated testing with the protocol
tester K1297-G20. It is a set of tools for the
development and execution of system tests.
Among others, it enables you to realize
regression tests, sequential tests, the execu-
tion of randomly selected test cases and ver-
dict statistics. The tests are defined in sce-
nario files that are executed by the test case
controller. With the Java-based GUI, which is a
standalone application, it is possible to select
MSC feature files and build test scenarios. The
GUI is easy to use and features a wizard that
provides interactive help on configuring and
running tests.
TSP.1+
Supports simple “means of testing” subset of
TSP.1+ Protocol (DES/MTS-00051 V4.2) to
access the SAPs (Service Access Points) of
emulations in a loaded protocol stack.
Remote access to Points of Control andObservation (PCO)
Load and unload pre-configured emulationstacks
Online configuration of loaded stacks
Multisession capable, parallel access of multipleTSP.1+ clients to one K1297-G20 ProtocolTester
Send and receive ASPs (Abstract ServicePrimitive)
Connection via LAN or remote dial-in option
Transmission of recording files in binary ordecoded format via HTML or FTP
Conformance andInteroperability Tests to Guarantee Proper Network Element
Creates a reliable reference model for the
operators’ acceptance tests. Included in
K1297 Medium and Premium packages.
Inspecting Quality of ServiceParameters
High Quality of Service (QoS) sets you apart
from the competition. A good reliable service
means end user satisfaction, which translates
into consistent short– and long-term profits.
For the best QoS testing solution monitoring
and gathering statistical information isn’t
enough. You need a reliable packet data
source to measure the most important
parameters like throughput and delay.
Protocol Analyzers • www.tektronix.com 3
K1297/K1205 Series Protocol TesterApplication Software
Large Range of Statistics
Secure performance data from your network,
such as:
Throughput KB/user
KB/interface
Mean packet delay
Count and compare numbers, such as:
Successful/failed attaches
PDP activations
Included in all packages. Comprehensive fea-
tures in K1205 monitoring package.
Build Own Applications/toolswith C-API
Easy implementation of special needs analy-
sis. Optional for all packages. Recommended
for K1205 monitoring package.
GPRS Call Traces
Fast overview about all data and messages
related to a call. Fast and easy analysis of
related problems. Included in all packages.
Comprehensive features in K1205
monitoring package.
Support of GPRS Interfaces
Frame Relay (FR) in channelized, unchannelizedand fractional mode
Ethernet 10 and 100 Mb
Gb (FR, with SMS)
Gi (FR+Ethernet)
Gn (FR+Ethernet)
Gp (FR+Ethernet)
Gr, Gd (with SMS), Gf, Gc
Gs
Ga
GPRS Abis (one of these versions, as an option: Alcatel, Ericsson, Lucent, Motorola,Nokia, Nortel or Siemens)
Software Subscription
All new software releases for the GPRS test
packages are free for one year from date of
delivery. No additional costs for ongoing
changes in the GPRS standardization for one
year from date of delivery. Supports several
versions of GPRS standards (SMG28-SMG31).
Onsite installation support means parameteri-
zation and configuration of a K1297 solution
to work within a test lab/test plants. All K1297
solutions contain two days of training for three
people at regional Tektronix Training Center for
K1297-G20 introduction. Two more training
days are included in medium and premium
packages. These two days give an introduction
to the handling of available conformance and
interoperability tests. One year SW upgrade
service includes free upgrade of all new soft-
ware releases for the GPRS network operator
package within one year from delivery. All
GPRS network operator packages are big
stepping stones on the path to implement, test
and commercialize GPRS networks.
Application Examples
Use the K1297 Protocol Tester with GPRS
Mobiles with Modem functionality via
RS-232 connection to evaluate delays
and transmission rates.
Use the K1297 Protocol Tester as the com-
plete GPRS Network Subsystem (NSS) to test
your BSS and Mobiles. Execute functional
tests and conformance tests and reproduce
error conditions.
Use one K1297 Protocol Tester to emulate
multiple network elements at the same time.
Test your GPRS NSS by emulating multiple
BSS and hundreds of mobiles.
The versatility of these test solution packages
offers numerous application possibilities. The
following are four often used configurations.
Use the K1297 Protocol Tester as an HLR in
your GPRS test network. It is more fault toler-
ant, can be reset more quickly and is easier to
operate than a real HLR. Plus, it is less expen-
sive than even a small HLR. The K1297
Protocol Tester is especially useful for
testing the SGSN.
GPRS Interoperability TestSolution for GPRS MS
The Interoperability Test Solution for GPRS MS
enables a fast and easy way to test and vali-
date GPRS mobile handsets when connected
to a Base Station Sub System (BSS). It pro-
vides a well thought-out combination of hard-
ware, monitoring and analysis capability, simu-
lation/emulation and conformance testing,
bundled with onsite installation support, free
hotline access, software upgrade service and
training. The Interoperability test solution for
GPRS MS runs on K1297-G20 protocol tester.
It is a subset of the GPRS Network Operator
Packages (for more information, please have a
look to Product Summary GPRS Network
Operator Packages).
Features for GPRS Interoperability TestSolution for GPRS MS
Monitoring on Abis (Alcatel, Ericsson,Lucent, Motorola, Nokia, Nortel, Siemens),Gb and Gi-interfaces
Real-time GPRS call trace capability on Gb-interface
Sufficient tools for analysis of received data (filter, trigger, statistics)
Simulation of an entire GPRS network switchingsubsystem (NSS) including access to theInternet
Protocol Analyzers • www.tektronix.com4
K1297/K1205 Series Protocol TesterApplication Software
Interoperability Tests for upper level protocolsLLC, SNDCP and GMM/SM
Simulation and emulation of network elements(BSS, SGSN)
Various tests for standardized GPRS procedure(Attach/detach (GPRS, IMSI, combined), locationarea update, intra routing area update, cell reselection, PDP context activation/modifica-tion/deactivation)
Traffic generation across the GPRS network
Simulation of more than 1000 subscribers (BSS or SGSN) per PRIME
Recording of errors and replay/reproduction in test networks
Inspecting QoS parameters
Extensive service support
Onsite installation support means parameteri-
zation and configuration of a K1297 solution
to work within a test lab / test plants.
All packages contain two days of training for
three people at regional Tektronix Training
Center for K1297-G20 introduction. Two more
training days are included in the Premium
package. These two days give an introduction
to the handling of the Interoperability tests.
One year SW upgrade service includes free
upgrade of all new software releases for the
GPRS network operator package within one
year from delivery.
The Interoperability test solution for GPRS MS
provides a wide range of applications, which
assist users in testing and validating software
and/or hardware components for GPRS
mobile handsets. Basic and Premium
Packages provide:
Functional testing
Regression testing by automatic execution ofpredefined test series
End-to-End testing with IP packet generationand adapted profiles (HTTP, FTP, etc.)
Network load generation and traffic simulation
Detailed analysis of received data
In addition, Premium Package provides:
Interoperability Tests of MS for upper level protocols (LLC, SNDCP and GMM/SM)
Package Componentsand Benefits
Simulation/Emulation of GPRSNetwork Elements
Create and emulate functioning network elementsfor test purposes. Compare reaction of emulatedand real Network Elements.
Network Switching Subsystem Emulation
Browse with a GPRS mobile on the Web
(HTML or WAP) by connecting a K1297
Protocol Tester to a BSS. Find BSS or Mobile
problems by reducing error possibilities by
emulating the complete Network Switching
Subsystem (NSS).
End-to-End Tests with GPRSMobiles Connected Via BSS
Ensure your subscriber satisfaction by
check data transmission and delay in test
and live networks.
Test your complete GPRS backbone with high
load from thousands of subscribers on multi-
ple BSS with automated call generation, data
transmission and statistics in test and live
networks.
Integrated Test Functions inMobile/Base Station Subsystem
Interoperability test solution 1xPRIME Monitoring 2 days onsite installation supportfor GPRS MS – 1x Ethernet Simulation 2 days trainingBasic Package 1xAP4 Emulation 1 year SW upgrade service
Free hotline access
Interoperability test solution 1xPRIME Monitoring 2 days onsite installation supportfor GPRS MS – 1x Ethernet Simulation 4 days trainingPremium Package 1xAP4 Emulation 1 year SW upgrade service
1xAP1 Interoperability Tests Free hotline accessfor MS
Interoperability test solution Interoperability Tests 2 days onsite trainingfor GPRS MS – Upgrade for MS 1 year SW upgrade servicefrom Basic Package Free hotline accessto Premium Package
K1297/K1205 Series Protocol TesterApplication Software
Inspecting Quality of ServiceParameters
High Quality of Service (QoS) sets you apart
from the competition. A good reliable service
means end user satisfaction, which translates
into consistent short- and long-term profits.
For the best QoS testing solution monitoring
and gathering statistical information isn’t
enough. You need a reliable packet data
source to measure the most important
parameters like throughput and delay.
Large Range of Statistics
Secure performance data from your network,
such as:
Throughput KB/user
KB/interface
Mean packet delay
Count and compare numbers, such as:
Throughput KB/user
KB/interface
Mean packet delay
Count and compare numbers, such as:
Successful/failed attaches
PDP activations
GPRS Call Traces
Fast overview about all data and messages
related to a call. Fast and easy analysis of
subscriber related problems.
Support of GPRS Interfaces
Ethernet 10 and 100 Mb
Gb (FR, with SMS)
Gi (FR+Ethernet)
GPRS Abis (one of these versions, as an option:Alcatel, Ericsson, Lucent, Motorola, Nokia,Nortel or Siemens)
Software Subscription
All new software releases for the GPRS test
packages are free for one year from date of
delivery. No additional costs for ongoing
changes in the GPRS standardization for one
year from date of delivery. Supports several
versions of GPRS standards (SMG28-SMG31).
These two days give an introduction to the
handling of available conformance and inter-
operability tests. One year SW upgrade service
includes free upgrade of all new software
releases for the GPRS network operator pack-
age within one year from delivery. All GPRS
network operator packages are big stepping
stones on the path to implement, test and
commercialize GPRS networks. Note: One
manufacturer-specific GPRS Abis version
(Alcatel, Ericsson, Lucent, Nokia, Nortel or
Siemens) must be selected. The C-API is
optional for all packages.
Application Examples
Use the K1297 Protocol Tester as the com-
plete GPRS Network Subsystem (NSS) to test
your BSS and Mobiles. Execute functional
tests and conformance tests and reproduce
error conditions.
Use the K1297 Protocol Tester with GPRS
Mobiles with Modem functionality via
RS-232 connection to evaluate delays and
transmission rates.
3G Mobile UMTSSoftware
UMTS as the third generation mobile standard
will provide sophisticated services by using
latest CDMA and network technologies. Due to
the advances and complexity developing,
deploying and operating this mobile network
will, much more than in the past, require
extensive simulation and monitoring test tools.
As a leader in the mobile measurement busi-
ness Tektronix offers solutions to meet most of
the Protocol Test challenges. In this document
test applications for UMTS interfaces Iu, Iub
and Iur are described.
Features for 3G Mobile Units Software
Monitoring and Simulation/Emulation ofSignalling Protocols at the Iu, Iub, Iur Interfaces,Including Packet Encoded Protocols (PER) likeRANAP, NBAP and RNSAP
Powerful tools for development and test ofUMTS Network Elements like Node-B, RNC and UMSC
Support of two Simulation Links and oneMonitoring Link
Data Generation of IP Traffic on top of GTP emulation
Supports Interface Boards ATM E1/T1 and ATMSTM1/SONET OC3 Optical
General Applications
The products covered by this document
are designed for the following application
segments:
Functional Testing of Protocol Implementations
System Testing of Network Nodes
Simulation of RNC, CN (SGSN/MSC) and Node-B
Protocol Analyzers • www.tektronix.com6
K1297/K1205 Series Protocol TesterApplication Software
Software for K1297-G20 Protocol Tester supports functional tests in UMTS systemdevelopment and system tests in system integration at the UMTS Iu, Iub and Iur inter-faces. Monitoring, Simulation and Emulationfunctions are provided for relevant UMTS signaling protocols and user plane protocolsfor packet switched domain. Solutions areavailable for the most challenging test functions for PER encoded RANAP, NBAP and RNSAP protocols.
With UMTS Iu, Iub and Iur test software, the
RNC or CN at both sides of Iu interfaces as
well as RNC and Node-B can be simulated
and tested. The software enables telecommu-
nication equipment manufacturers to verify the
software implementation of the RNC, CN and
Node-B. This will ensure the quality of the
product development, minimize the develop-
ment time, and reduce the risks of their
UMTS projects.
UMTS standards according to Release 99
(3GPP) are supported unless stated otherwise.
The software packages support following
test functions:
Monitoring and Simulation of RANAP (TS 25.413)
Monitoring and Simulation of NBAP (TS 25.433)
Monitoring and Simulation of RNSAP (TS 25.423)
Monitoring and Simulation ofMM/CC/RR/GPRSMM/SM (TS 24.008)
Monitoring, Simulation and Emulation of ALCAP(Q.2630.1 and Q.2150.1/2)
Monitoring, Simulation and Emulation of SSCOP,SSCF, MTP-3b, SCCP protocols
Monitoring, Simulation and Emulation of GTP (TS 29.060)
IP Packet Generator and Comparator on top ofGTP-Emulation
Simulation of two physical links
Monitoring of one physical link
UMTS Reference Model
The UMTS architecture can be seen as the
next evaluation step of the 2G and 2.5G tech-
nologies GSM and GPRS. Thus UMTS will not
replace these technologies and their network
elements but extend the network architecture
by 2 new components: the Remote Network
Controller (RNC) and the Node B. As shown in
Figure 1 these two new network elements will
form 3 new UMTS specific interfaces:
The Iu interface between RNC and MSC/SGSN,with the Circuit Switched (CS) and PacketSwitched (PS) part
The Iub interface between RNC and Node B
The Iur interface between RNC’s
These new elements, the interfaces between
them and the great number of new protocols
create a huge demand for test applications.
Examples of test configurations, which can be
handled with the K1297-G20 UMTS solution,
will be described in the next chapters.
Figure 2 shows a G20, which simulates the
RNC network element towards the MSC and
SGSN. It depends on the test purpose, which
protocol layer needs to be simulated or emu-
lated. The message flow for the protocol to be
simulated is usually defined in a simple way
with the Message Sequence Chart (MSC) Tool
offered by the G20 Base Software. For all lay-
ers below the simulated protocol layer
Emulations are used, which behave according
to the standards.
The G20 in Figure 3 simulates a MSC towards
the SGSN and the RNC. This configuration
requires the appropriate GPRS packages
for Gs interface simulation. Applications such
as the Call Generator help to test the basic
call handling.
At the Iub interface CS and PS data have to
be handled on a single interface. As the RNC
controls the Node B and handles the complex-
ity of the radio interface there are lots of
information to be exchanged for managing
the radio cells and the user equipment. The
Iub interface is heavily involved in UMTS hand
offs and the RLC/MAC protocols reflect the
complex structure of the UMTS W-CDMA
radio interface (Uu). Therefore the demands
for testing on the Iub interface are extremely
high. This applies also to the Iur interface, as
both protocol stacks are very similar. Figure 4
shows a G20 simulating an RNC.
Protocol Analyzers • www.tektronix.com 7
Figure 1. UMTS reference model. Figure 2. K1297-G20 simulating a Radio Network Controller (RNC).
K1297/K1205 Series Protocol TesterApplication Software
Although the K1297-G20 was designed for
Simulation/Emulation purposes it is of course
also possible to use the G20 as a monitoring
device. Monitoring UMTS Interfaces adds
some additional test challenges: as the physi-
cal layer is often an optical media (e.g. STM1
optical) it is not possible to hook the unit to
an interface without disconnecting the lines
between the network nodes, unless there are
special monitoring points. Additionally an opti-
cal power splitter (per direction) might be nec-
essary to allow passive monitoring. The G20
in Figure 5 monitors the complete Iu interface
(Iu-CS and Iu-PS) at the same time.
Figure 6 shows a G20 which monitors the Iub
and the Iur interface.
Conformance Tests
Conformance Test Suites provide automatic
and complete test solutions for protocols. Test
Suites for SSCOP and ALCAP with hundreds
of test cases are the first of a series of suites,
which have been released for testing UMTS
relevant network elements. Further confor-
mance test suites like RANAP and NBAP
will follow very soon.
Protocol Analyzers • www.tektronix.com8
Figure 3. K1297-G20 simulating a MSC towards RNC and SGSN.
Figure 4. K1297-G20 simulating a RNCtowards a Node B.
Figure 5. K1297-G20 monitoring the Iu interface.
Figure 6. K1297-G20 monitoring of Iub and Iur interface.
Figure 7. Example recording of simulation of arelocation scenario on Iu interface.
Figure 8. Example scenario for a Node B configuration on Iub interface.
K1297/K1205 Series Protocol TesterApplication Software
Characteristics
The G20 UMTS software packages are fully integratedin the G20 architecture and make use of all powerfultools and options offered by the base software. Theworkflow is straight forward: Messages are created inthe Message Building System (MBS) and stored in amessage pool, a message flow is created in graphicalMessage Sequence Chart (MSC) or programmed inForth or C and finally the Emulation Stack Editor (ESE)describes the connections between and contains all theparameters for linking all emulation and simulation enti-ties. The ESE is the control center from where the usercan start and stop test scenarios.
Please refer to the Protocol Tester K1297-G20 BaseSoftware Product Summary for further information.
Figure 7 shows an example trace, which was record-ed while a UMTS Relocation procedure was running.For this purpose 3 Network elements (Source RNC,Target RNC, SGSN) have been simulated.
CDMAone Software
CDMA (Code Division Multiple Access) is not only a technology used to transmit data via the air interfacebetween a mobile station and a BSS (Base station sys-tem), but is also the name of the whole mobile networkbehind and is the fastest-growing wireless technology.CDMAone is the term for the 2nd generation of themobile networks based on CDMA technology with priority on circuit switched voice transmission and applications like SMS (short message services).
Tektronix offers following Software packages forCDMAone for the Protocol Testers K1205 and K1297-G20 to test the CDMA network:
CDMA Monitoring/Simulation/Emulation
SMS Monitoring/Simulation
Partial Network element emulations of MSC,BSS, HLR and VLR
Features of cdmaOne Software
Analysis of received data (filter, trigger,statistics)
Simulation of cdmaOne protocols
Partial emulation of CDMAone network elements (MSC, BSS, HLR, VLR) Following procedures are available:
Transport Packet Data (see Transport product summary)
IP/SS7
VoIP
IP Applications
Features Monitoring
Decode IP related protocols mentioned below
IP Traffic Analyzer
Features Simulation/Emulation
IP emulation capabilities are realized in Packet Data Transport Package (see Packet Data Transport section)
Protocol Analyzers • www.tektronix.com 9
K1297/K1205 Series Protocol TesterApplication Software
K1297/K1205 decodes all needed protocols in theinterface between SG (Signaling Gateway) & MGC(Media Gateway Controller), i.e. IP/SS7 (M3UA/SCTP).For UMTS the same functionality is needed & support-ed for the Iu-PS & the Iur Interface. The interfacebetween MGC and MG (Media Gateway) is alsodecodable (VoIP package). Higher Layer Applicationslike HTTP, Radius, Telnet, etc. are also supported. Forthe K1297-G20 we are offering an IP & UDP emula-tion as a basis for further developments (seeNarrowband Transport section). Intelligent data reduc-tion is possible through IP address filtering (BerkeleyFilter configurable via LL setup) already on theEthernet Board.
Examples for TestSolutions
Test Solution Ordering Numbers*2
IP Applications 7PK12xx-6JJ7PK12xx-6TP
IPS7 IN 7PK12xx-xCJ7PK12xx-xTC7PK12xx-xTN7PK12xx-xJS7PK12xx-xTP
*2 For x insert relevant code: 05 for K1205, 21 for K1297-G20 application; 6 for monitoring, 7 for simulation/emulation.
Intelligent NetworkSoftware
Most of the features of mobile and fixed networks are realized by Intelligent Network (IN) components.Tektronix offers software packages for IN mentionedbelow. These Software Packages provide testing of INprotocols and IN Network Components:
IN Monitoring/Simulation/Emulation
Emulation of SSP and SCP
Features Monitoring
Decoding of IN protocols
– IN call trace
Features Simulation/Emulation
Simulations-/Emulation of IN protocols
IN Call/Transaction Generator
Free Programmable Statistics
SSP Network element Emulation (acc. ETSI)
SCP Network element Emulation (acc. ETSI)
Prerequisite for IN software packages is the corresponding Transport SCCP Package (7PK12xx-xTCxx).
Applications
Tektronix offers now a complete range of monitoringapplications for IN Protocols for Protocol TestersK1205 and K1297-G20 and in additionsimulation/emulation capability of IN protocols onK1297-G20. MBS provides the possibility to changeparameters for simulation and to emulate Networkelements SSP and SCP. IN Protocol Packages runtogether with all Transport Protocol Packages (SS#7,IP, ATM). Because of this the customer can test signaling of IN Components in Mobile and FixedNetworks in active and passive mode.
Examples for TestSolutions
Test Solution Ordering Numbers*3
IN over SS#7 7PK12xx-xCJ7PK12xx-xTC7PK12xx-xTN
IN over IP 7PK12xx-xCJ7PK12xx-xTC7PK12xx-xJS7PK12xx-xTP
IN over ATM 7PK1221-xCJ7PK1221-xTC7PK1221-xTB
*3 For x insert relevant code: 05 for K1205, 21 for K1297-G20 application; 6 for monitoring, 7 for simulation/emulation.
Protocol Analyzers • www.tektronix.com10
K1297/K1205 Series Protocol TesterApplication Software
Transport and ISUPSoftware
This section provides information on basic transportprotocols and ISUP/TUP for various technologies. Youwill find additional facts about protocol independentfeatures and related Applications of K1297/K1205Protocol Testers (e.g. Monitoring, Zoom, Simulation,Emulation etc.) in corresponding sections. Usually atleast one of these packages is needed as prerequisitefor higher layer protocol testing.
Areas Covered Here Are:
Narrowband
Broadband
Packet Data
SCCP
ISUP
Tektronix offers for K1297/K1205 Protocol Testers thefollowing software packages for TechnologiesTransport and ISUP/TUP:
SS#7 (MTP) Monitoring/Simulation/Emulation
SS#7 (SCCP/TCAP)Monitoring/Simulation/Emulation
IP Monitoring/Emulation
SSCOP/SSCF Monitoring/Simulation/Emulation
MTP3b Monitoring/Simulation/Emulation
ISUP/TUP Monitoring/Simulation/Emulation
Features Monitoring
Decoding of Transport Protocols and Decodingof ISUP/TUP Protocols
Call Detail Records (CDR)
Call Statistics
Free programmable counters
Call trace
Busy Hour Call Attempt (BHCA) measurements
Features Simulation/Emulation
Simulations– and Emulation capability of SS#7protocol elements
Simulations– and Emulation capability ofISUP/TUP protocols
Applications
Transport software packages are the basis for most ofother application software for K1297/K1205 ProtocolTesters. These products provide monitoring/simula-tion/emulation capabilities for transport protocol lay-ers, i.e. OSI layer 2 and layer 3. Depending on theupper layer protocols appropriate transport packagesneed to be ordered. ISUP software packages extendthe broad basis of protocol software for K1297/K1205Protocol Testers. ISUP Protocol Packages run togetherwith all Transport Protocol Packages (SS#7, IP, ATM).Because of this the customer can test signaling ofISUP Components, e.g. in Interworking– orInteroperability Tests.
Examples for ProtocolSolutions
Test Solution Ordering Numbers*4
IN over SS#7 7PK12xx-xCJ7PK12xx-xTC7PK12xx-xTN
IN over IP 7PK12xx-xCJ7PK12xx-xTC7PK12xx-xJS7PK12xx-xTP
IN over ATM 7PK1221-xCJ7PK1221-xTC7PK1221-xTB
*4 For x insert relevant code: 05 for K1205, 21 for K1297-G20 application; 6 for monitoring, 7 for simulation/emulation.
Ordering Information
Please refer to the Protocol Tester K1205 ProductSummary for further information.
Please refer to the Protocol Tester K1297-G20 BaseSoftware Product Summary for further information.
GSM Protocol Packages for K1205
7PK1205-6MG11 – K1205 prot. SW Mon 2G Mobile(GSM/PCS) Package; MAP/TCAP, BSSMAP, DTAP,SUPS, CAMEL (CAP); Prereq.: System version ≥2.1(7KK1205-6ABxx) & 7PK1205-6TC11.
7PK1205-6MS11 – K1205 prot. SW Mon 2G MobileSMS Package; SMRP; SMTP u/d; SMCP (GPRS SMS);SMRP (GPRS SMS RP); SMS for CDMA (IS637);Prereq.: System version ≥ 2.1 (7KK1205-6ABxx) &7PK1205-6MG11, –6MC11 or –6GB11.
Manufacturer Specific Abis
Packages for K1205
7KK1205-6EA11 – K1205 SW Mon 2G Mobile GSMAbis; MOTOROLA specific Protocols incl. Abis O&M forEurope and USA; Prereq.: System version ≥2.1(7KK1205-6ABxx) & 7PK1205-6TN11.
7KK1205-6EB11 – K1205 SW Mon Mobile GSM Abis; NOKIA specific Protocols incl. Abis O&M ;Prereq.: System version >2.1 (7KK1205-6ABxx) &7PK1205-6TN11.
7KK1205-6EC11 – K1205 SW Mon Mobile GSM Abis; LUCENT specific Protocols incl. Abis O&M;Prereq.: System version ≥2.1 (7KK1205-6ABxx) &7PK1205-6TN11.
7KK1205-6ED11 – K1205 SW Mon 2G Mobile GSMAbis; ALCATEL specific Protocols incl. Abis O&M;Prereq.: System version ≥2.1 (7KK1205-6ABxx) & 7PK1205-6TN11.
7KK1205-6EE11 – K1205 SW Mon Mobile GSM Abis; ERICSSON specific Protocols incl. Abis O&M;Prereq.: System version ≥2.1 (7KK1205-6ABxx) &7PK1205-6TN11.
7KK1205-6EF11 – K1205 SW Mon Mobile GSM Abis;MCI specific Protocols incl. ISUP; Prereq.: System version ≥2.1 (7KK1205-6ABxx) & 7PK1205-6TN11.
7KK1205-6EG11 – K1205 SW Mon Mobile GSM Abis;SIEMENS specific Protocols incl. Abis O&M , RSL,ASUB; Prereq.: System version ≥2.1 (7KK1205-6ABxx) & 7PK1205-6TN11.
7KK1205-6EH11 – K1205 SW Mon Mobile GSM Abis; NORTEL specific Protocols incl. Abis O&M;Prereq.: System version ≥2.1 (7KK1205-6ABxx) &7PK1205-6TN11.
Protocol Analyzers • www.tektronix.com 11
K1297/K1205 Series Protocol TesterApplication Software
GSM Monitoring ProtocolPackages for K1297-G20
7PK1221-6MG11 – K1297-G20 Prot. SW Mon 2GMobile GSM/PCS Package; incl. all 2G MAP/TCAP variants, BSSMAP, DTAP, SUPS, CAMEL variants(CAP); Prereq.: System version ≥1.1 (7KK1220-0SCxx) & 7PK1221-6TC11.
7PK1221-6MS11 – K1297-G20 Prot. SW MonMobile SMS Package; incl. SMRP; SMTP u/d; SMCP(GPRS SMS); SMRP (GPRS SMS RP); SMS for CDMA(IS637); Prereq.: System version ≥1.1 (7KK1220-0SCxx) & 7PK1221-6MG11 or –6MC11 or –6MM11or –6Gx11.
GSM Monitoring/Simulation/Emulation Protocol Packages for K1297-G20
7PK1221-7MG11 – K1297-G20 Prot. SWMon/Sim/Emu 2G Mobile GSM/PCS Package; incl.MAP/TCAP, BSSMAP, DTAP, SUPS, CAMEL (CAP);Prereq.: System version ≥1.1 (7KK1220-0SCxx) &7PK1221-7TC11.
7PK1221-7MS11 – K1297-G20 Prot. SWMon/Sim/Emu Mobile SMS Package; incl. SMRP;SMTP u/d; SMCP (GPRS SMS); SMRP (GPRS SMSRP); SMS for CDMA (IS637); Prereq.: System version≥1.1 (7KK1220-0SCxx) & 7PK1221-7MG11or –7MC11 or –7MM11 or –7Gx11.
7PK1221-7ML11 – K1297-G20 Prot. SWMon/Sim/Emu Mobile Package; for Location serviceprotocols (BSSLAP, BSSLAP-LE); Prereq.: System version ≥1.1 (7KK1220-0SCxx) & 7PK1221-7MG11.
7KK1223-8MG11 – K1297-G20 Emu entity NetworkElement 2G Mobile (GSM); for MSC and BSS; Prereq.:7PK1221-7MG11.
7KK1223-8GH11 – K1297-G20 Emu partial entityNetwork Element Mobile; HLR / VLR (GSM+GPRS);Prereq.: 7PK1221-7MC11 or 7PK1221-7MG11 or7PK1221-7MM11.
7KK1223-8JS11 – K1297-G20 Emu entity Network Element Core&Intelligent Network (SCP); for CAMEL Ph1 and ETSI Core INAP CS-1; Prereq.:7PK1221-7CJ11 or 7PK1221-7MG11.
O&M ; Prereq.: System version ≥1.0 (7KK1220-0SCxx) & 7PK1221-6TN11.
7KK1225-6MN11 – Manuf. specif. Protocols Mon 2GMobile Abis; NOKIA specific Protocols incl. Abis O&M;Prereq.: System version ≥1.0 (7KK1220-0SCxx) &7PK1221-6TN11.
7KK1225-6MT11 – Manuf. specif. Protocols Mon 2GMobile Abis; NORTEL specific Protocols incl. Abis O&M;Prereq.: System version ≥1.0 (7KK1220-0SCxx) &7PK1221-6TN11.
7KK1225-6MS11 – Manuf. specif. Protocols Mon 2GMobile Abis; SIEMENS specific Protocols incl. Abis O&M;Prereq.: System version ≥1.0 (7KK1220-0SCxx) &7PK1221-6TN11.
GSM Bundles
7KK1205-6SM11 – K1205 SW Mon 2G Mobile GSM;Containing: 7PK1205-6TN & 7PK1205-6TC &7PK1205-6CS & 7PK1205-6MC & 7PK1205-6MG &7PK1205-6MS; Prereq.: System version ≥2.0(7KK1205-6ABxx).
7PK1221-7GN11 – K1297-G20 prot. SWMon/Sim/Emu 2.5G and 3G Mobile Gn, Gp, Ga, Iu PSPackage; GTP (GSM09.60; TS29.060); Prereq.:System version ≥1.1 (7KK1220-0SCxx) & 7PK1221-7TP11.
7PK1221-7GS11 – K1297-G20 prot. SWMon/Sim/Emu GPRS Gs Package; incl. BSSAP+(GSM09.18; TS29.018); Prereq.: System version ≥1.1(7KK1220-0SCxx) & 7PK1221-7TC11.
7PK1221-7TP11 – K1297-G20 prot. SWMon/Sim/Emu Transport Packet Data Package; incl.X.25; LAP B; FR; IPv4; ARP/RARP; TCP & UDP; ICMP;IEEE802.3 MAC; Prereq.: System version ≥1.1(7KK1220-0SCxx) & Ethernet or ATM or Prime Board.
7PK1221-7MM11 – K1297-G20 prot. SWMon/Sim/Emu 2.5G and 3G Mobile Package; MAP(GSM09.02; TS29.002)/TCAP 6.x and higher;BSSMAP, DTAP 6.x and higher; Prereq.: System ver-sion ≥1.1 (7KK1220-0SCxx) & 7PK1221-7TC11.
GPRS Conformance Tests(Running in CompatibilityWindow of K1297-G20)
7KK1297-8ZA11 – K1297-Classic SW GPRSConformance Test; NS, BSSGP of BSS: TTCNConformance Test Suite for GPRS NS and BSSGPProtocol, IUT is BSS; Prereq.: 7KK1297-7ZA11.
7KK1297-8ZB11 – K1297-Classic SW GPRSConformance Test; NS, BSSGP of SGSN: TTCNConformance Test Suite for GPRS NS and BSSGPProtocol, IUT is SGSN; Prereq.: 7KK1297-7ZA11.
7KK1297-8ZC11 – K1297-Classic SW GPRSConformance Test; LLC of SGSN: TTCN ConformanceTest Suite for GPRS LLC Protocol, IUT is SGSN;Prereq.: 7KK1297-7ZA11.
7KK1297-8ZD11 – K1297-Classic SW GPRSConformance Test; LLC of MOBILE: TTCNConformance Test Suite for GPRS LLC Protocol; IUT isMobile Station connected via BSS; Prereq.:7KK1297-7ZA11.
7KK1297-8ZE11 – K1297-Classic SW GPRSConformance Test; SNFCP of SGSN: TTCNConformance Test Suites for GPRS SNDCP Protocol,IUT is SGSN; Prereq.: 7KK1297-7ZA11.
7KK1297-8ZF11 – K1297-Classic SW GPRSConformance Test; SNDCP of MOBILE: TTCNConformance Test Suite for GPRS SNDCP Protocol; IUT is Mobile Station connected via BSS; Prereq.:7KK1297-7ZA11.
7KK1297-8ZH11 – K1297-Classic SW GPRSConformance Test; GMM/SM of SGSN: TTCNConformance Test Suite for GPRS GMM/SM Protocol,IUT is SGSN; Prereq.: 7KK1297-7ZA11.
7KK1297-8ZL11 – K1297-Classic SW GPRSConformance Test; GMM/SM of MOBILE: TTCNConformance Test Suite for GPRS GMM/SM Protocol;IUT is Mobile Station connected via BSS; Prereq.:7KK1297-7ZA11.
Protocol Analyzers • www.tektronix.com 13
K1297/K1205 Series Protocol TesterApplication Software
7KK1269-7GA11 – HW – SW bundle K1297 2.5GMobile GPRS Solution Package Hardware and soft-ware for GPRS monitoring, simulation and emulationon Gb, Gi, Gn, Ga, Gp, Gs, Gc, Gd, Gf, Gr interfaceswith 2 days training and 2 days onsite installationsupport.
7KK1269-7GB11 – HW – SW bundle K1297 GPRSSolution Package Hard– and Software for GPRS moni-toring, simulation and emulation on Gb, Gi, Gn, Ga,Gp, Gs, Gc, Gd, Gf, Gr interfaces, 4 days training, 2days onsite inst. support; BSS and SGSN Conf. Tests.
7KK1269-7GC11 – HW – SW bundle K1297 GPRSSolution Package Hard– and Software for GPRS moni-toring, sim– and emulation on Gb, Gi, Gn, Ga, Gp, Gs,Gc, Gd, Gf, Gr interfaces, 4 days training, 2 daysonsite inst. support; MS, BSS and SGSN ConformanceTests.
7KK1269-7GD11 – HW – SW bundle K1297 2.5GMobile; Interoperability Test solution for GPRS MSconnected to a BSS. Mon/Sim/Emu on Gb-, Gi– inter-face; 2 days onsite installation support; 2 days train-ing, 1 year SW subscription.
7KK1269-7GE11 – HW – SW bundle K1297 2.5GMobile GPRS; Interoperability Test solution for GPRSMS; Mon/Sim/Emu on Gb-, Gi– interface;Interoperability Tests for LLC, SNDCP, GMM/SM; 4days training, 2 days onsite instal. support, 1 year SWsubscription.
7KK1269-7GE51 – HW – SW bundle K1297 2.5GMobile GPRS Cross Upgrade from Interoperability TestSolution for GPRS MS Basic package toInteroperability Test solution for GPRS MS Premiumpackage; 2 days training, 1 year SW subscription;Prereq.: 7KK1269-7GD11.
7PK1221-6JJ11 – K1297-G20 prot. SW Mon IPApplications Package; incl. NBSS; NBDG; NBNS; NFS;DNS; SMNP; Telnet; FTP; Radius; MIP; IKE and others;Prereq.: System version ≥1.1 (7KK1220-0SCxx) & 7PK1221-6TP11.
IP Monitoring/Simulation/Emulation Protocol Packages for K1297-G20
7PK1221-7JS11 – K1297-G20 prot. SWMon/Sim/Emu IPS7 Package; M3UA, SCTP; Prereq.: System version ≥1.1 (7KK1220-0SCxx) & 7PK1221-7TP11.
IN Protocol Packages for K1205
7PK1205-6CJ11 – K1205 prot. SW Mon CoreIntelligent Networks Package; for standard, countryand vendor specific variants; Prereq.: System version≥2.1 (7KK1205-6ABxx) & 7PK1205-6TC11.
IN Monitoring ProtocolPackages for K1297-G20
7PK1221-6CJ11 – K1297-G20 prot. SW Mon CoreIntelligent Networks Package; incl. standard, countryand vendor specific INAP/TCAP variants; Prereq.: System version ≥1.1 (7KK1220-0SCxx) & 7PK1221-6TC11.
IN Monitoring/Simulation/Emulation Protocol Packages for K1297-G20
7PK1221-7CJ11 – K1297-G20 prot. SWMon/Sim/Emu Core Intelligent Networks Package;incl. standard, country and vendor specific INAP/TCAPvariants; Prereq.: System version ≥1.1 (7KK1220-0SCxx) & 7PK1221-7TC11.
7KK1223-8JS11 – K1297-G20 Emu entity NetworkElement Core&Intelligent Network (SCP); for CAMEL Ph1 and ETSI Core INAP CS-1; Prereq.:7PK1221-7CJ11 or 7PK1221-7MG11.
Core&IN Bundles
7KK1205-6SC11 – K1205 SW Mon Core&IntelligentNetwork (SS#7 + IN); Containing: 7PK1205-6TN &7PK1205-6TC & 7PK1205-6CS & 7PK1205-6CJ;Prereq.: System version ≥2.0 (7KK1205-6ABxx).
7KK1221-7SC11 – K1297-G20 SW bundleMon/Sim/Emu Core&Intelligent Network (SS#7 + IN);incl. country variants; containing: 7PK1221-7TN &7PK1221-7TC & 7PK1221-7CS & 7PK1221-7CJ;Prereq.: System version ≥1.0 (7KK1220-0SCxx).
Transport&ISUP ProtocolPackages for K1205
7PK1205-6TN11 – K1205 prot. SW Mon TransportNarrowband Package; MTP L2; MTP L3; MTP T&M;LAP D; LAP D Management; LAP V; Prereq.: Systemversion ≥2.1 (7KK1205-6ABxx) & Narrow Band LineInterface Board.
7PK1205-6TC11 – K1205 prot. SW Mon TransportSCCP Package; SCCP/SCMG; TCAP; OMA ; Prereq.: System version ≥2.1 (7KK1205-6ABxx) & 7PK1205-6TN11.
7PK1205-6TP11 – K1205 prot. SW Mon TransportPacket Data Package; incl. X.25; LAP B; FR; IPv4;IPv6; ARP/RARP; EGP; RIP; TCP & UDP; ICMP;IEEE802.3 MAC; Prereq.: System version ≥2.1(7KK1205-6ABxx) and Ethernet Board.
7PK1205-6CS11 – K1205 prot. SW Mon CoreISUP/TUP Package ; for standard, country and vendor specific ISUP/TUP variants ; Prereq.:System version ≥ 2.1 (7KK1205-6ABxx) & 7PK1205-6TN11 and/or –6TC11
Transport&ISUP MonitoringProtocol Packages for K1297-G20
7PK1221-6TN11 – K1297-G20 prot. SW MonTransport Narrowband Package; incl. MTP L2; MTPL3; MTP T&M; LAP D; LAP D Management; LAP V;Prereq.: System version ≥1.1 (7KK1220-0SCxx) andNarrowband Line Interface Board.
7PK1221-6TC11 – K1297-G20 prot. SW MonTransport SCCP Package; incl. SCCP/SCMG; TCAP;OMAP; Prereq.: System version ≥1.1 (7KK1220-0SCxx) and 7PK1221-6TN11 or –6TB11.
7PK1221-6TP11 – K1297-G20 prot. SW MonTransport Packet Data Package; incl. X.25; LAP B; FR;IPv4; IPv6; ARP/RARP; EGP; RIP; TCP & UDP; ICMP;IEEE802.3 MAC; Prereq.: System version ≥1.1(7KK1220-0SCxx) and Ethernet or ATM board.
7PK1221-6TB11 – K1297-G20 prot. SW MonTransport Broadband Package SSCOP (Q.2110),SSCF-UNI (Q.2130), SSCF-NNI (Q.2140), MTPL3b(Q.2210); Prereq.: System version ≥1.1 (7KK1220-0SCxx) and ATM HW: 7KK1297-3Bxxx or 7KK1200-3Cxxx, ≥8 link license.
7PK1221-6CS11 – K1297-G20 prot. SW Mon CoreISUP/TUP Package; incl. standard, country and vendorspecific ISUP/TUP variants; Prereq.: System version≥1.1 (7KK1220-0SCxx) and 7PK1221-6TN11or –6TC11.
Transport&ISUPMonitoring/Simulation/EmulationProtocol Packages for K1297-G20
7PK1221-7TN11 – K1297-G20 prot. SWMon/Sim/Emu Transport Narrowband Package; incl.MTP L2; MTP L3; MTP T&M; LAP D; LAP DManagement; LAP V; Prereq.: System version ≥1.1(7KK1220-0SCxx) & Narrowband Line InterfaceBoard.
7PK1221-7TC11 – K1297-G20 prot. SWMon/Sim/Emu Transport SCCP Package; incl.SCCP/SCMG; TCAP; OMAP; Prereq.: System version≥1.1 (7KK1220-0SCxx) & 7PK1221-7TN11 or7PK1221-7TB11.
7PK1221-7TP11 – K1297-G20 prot. SWMon/Sim/Emu Transport Packet Data Package; incl.X.25; LAP B; FR; IPv4; ARP/RARP; TCP & UDP; ICMP;IEEE802.3 MAC; Prereq.: System version ≥1.1(7KK1220-0SCxx) & Ethernet or ATM or Prime Board.
7PK1221-7CS11 – K1297-G20 prot. SWMon/Sim/Emu Core ISUP/TUP Package; standard,country and vendor specific ISUP/TUP variants; Prereq.: System version ≥1.1 (7KK1220-0SCxx) & 7PK1221-7TN11 or 7PK1221-7TC11.
Protocol Analyzers • www.tektronix.com 15
K1297/K1205 Series Protocol TesterApplication Software
For the most up-to-date product information visit our web site at www.tektronix.com