1 Junk Subs are designed to remove debris too heavy to be circulated out of the hole and are normally positioned in the drill string, just above the drill bit or mill. In operation, the debris is brought up from the bottom by this circulation and drops over the lip into the cup as the circulation slows, allowing the denser material to drop back. The Junk Sub is fabricated from high quality steel, incorporating Rib Guides to prevent the cup being crushed. Junks Subs are available in three different cup lengths, the selection depending on the capacity required. If increased capacity is required several Junk Subs can be made up above the drill bit or mill. Junk Subs are avaible with right and left thread and can be custommade to Customer specifications. 1 Junk Subs www.dmz-eng.com 1 «DMZ Engineering», 8-A, Lodzinskaya str. Kharkov, Ukraine, 61099, tel: +38 (057) 759-13-06 e-mail: [email protected] OD, mm Cup length, mm Length, mm Connection 100 250 1100 NC-26 100 500 1260 NC-26 100 750 1510 NC-26 108 250 1100 2 7/8 Reg 108 500 1260 2 7/8 Reg 108 750 1510 2 7/8 Reg 112 250 1100 2 7/8 Reg 112 500 1260 2 7/8 Reg 112 750 1510 2 7/8 Reg 114 250 1100 NC-31 114 500 1260 NC-31 114 750 1510 NC-31 127 250 1100 3 1/2 Reg 127 500 1260 3 1/2 Reg 127 750 1510 3 1/2 Reg