At first system should be in DHCP mode and connect to e0/2. It will automatically detect the ip range from Class C IP Address: 192.168.1.33/24 Gateway : 192.168.1.1 Enter into the product: http://192.168.1.1 Username: netscreen Password: netscreen
Juniper SSG 5
Sep 15, 2015
Juniper SSG 5
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Enter into the product
At first system should be in DHCP mode and connect to e0/2.It will automatically detect the ip range from Class C
IP Address: 192.168.1.33/24
Gateway : 192.168.1.1
Enter into the product:http://192.168.1.1
Username: netscreenPassword: netscreen
Home Page
Go to network>interfaces>list
Lan IP Details: (Trust Port)
WAN IP : (Un trust Port)
WAN is UP
Date & Time:
System Logs:
The below screenshot is taken from laptop is directly connected to 3750 switch and take the SSG 5 via GUI:
Reachability from LAN & WAN
Related Documents
