79366 A DIVISION OF DOUGLAS DYNAMICS, LLC CAUTION Use standard methods and practices when attaching snowplow and installing accessories, including proper personal protective safety equipment. CAUTION Read this document before installing the Volvo L50–L120 attachment plates. WARNING Do not exceed GVWR or GAWR, including blade and ballast. Volvo L50–L120 Attachment Plates Steel Trip Edge Pusher Plows PARTS LIST June 1, 2020 Lit. No. 78653, Rev. 00 2 1 79366 Volvo L50–L120 Attachment Plates Kit Item Part Qty Description 1 79379 1 Volvo L50–L120 Attachment Plate DS 2 79380 1 Volvo L50–L120 Attachment Plate PS
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
79366
A DIVISION OF DOUGLAS DYNAMICS, LLC
CAUTIONUse standard methods and practices when attaching snowplow and installing accessories, including proper personal protective safety equipment.
CAUTIONRead this document before installing the Volvo L50–L120 attachment plates.
WARNINGDo not exceed GVWR or GAWR, including blade and ballast.
Volvo L50–L120 Attachment PlatesSteel Trip Edge Pusher Plows
PARTS LIST
June 1, 2020Lit. No. 78653, Rev. 00
2
1
79366 Volvo L50–L120 Attachment Plates KitItem Part Qty Description
1 79379 1 Volvo L50–L120 Attachment Plate DS2 79380 1 Volvo L50–L120 Attachment Plate PS
79366
Lit. No. 78653, Rev. 00 2 June 1, 2020
INSTALLATION INSTRUCTIONS
Install the VOLVO L50-L120 attachment plates to the coupler mounting hubs on the back of the blade using a 1-7/16'' x 6-1/2'' pin, two 1-1/2'' x 2-1/2'' OD x 1-1/2'' ID doublers, and two 7/16" x 1-3/4'' linchpins in each mounting pin location on the attachment plates, as shown.
NOTE: Hardware and coupler mounting hubs shown in the image are not included in the attachment plate kit. They are shipped with the pusher plow.
7/16" x 1-3/4''
Linchpin
1-7/16'' x 6-1/2'' Pin 1-1/2'' x 2-1/2'' OD
x 1-1/2" ID Doubler
79366
Lit. No. 78653, Rev. 00 3 June 1, 2020
ATTACHING SNOWPLOW TO LOADER
The pusher plow Volvo L50–L120 attachment plates are designed to work with the vehicle's OEM attachment bracket.
1. Position the loader close to the snowplow with the mount points on the loader plate aligned with the pusher plow Volvo L50–L120 attachment plates.
2. Tilt the loader plate forward and position the top edge of the plate under the receiving pockets on the attachment plates.
3. Slowly raise the arms on the loader and tilt the loader plate toward the cab until the snowplow mount plates are fl ush with the Volvo L50–L120 attachment plate.
ReceivingPockets
79366
Lit. No. 78653, Rev. 00 4 June 1, 2020
Copyright © 2020 Douglas Dynamics, LLC. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, fi lm, or other distribution and storage media, without the written consent of the company. Authorization to photocopy items for internal or personal use by the company's outlets or snowplow owner is granted.
The company reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifi cations used. This equipment manufacturer or the vehicle manufacturer may require or recommend optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. The company off ers a limited warranty for all snowplows and accessories. See separately printed page for this important information.
Printed in U.S.A.
Related Documents
