JS AUTO LONG REACH

A Product of Hard Work

JS AUTO LONG REACH

Excellent all-round visibility

Large glass areas for closer working.

Low-level engine cover for excellent rear visibility.

Easy-open, gas-strut-assisted front window.

Auto mode for optimum performance

Advanced Management System controls all major functions.

Four operating modes: Auto, Economy, Precision and Lifting.

Auto mode automatically switches between maximum power and economy for fuel efficiency.

State-of-the-art hydraulics

Increased hydraulic flow and pressure for greater power.

Regenerative system for faster cycle times and reduced fuel consumption.

Cushion control on boom and dipper as standard.

Superb operator environment

Ergonomic high-back seat for superior comfort.

Easy-to-use, clearly marked controls.

Optional climate control.

Easy access to all areas

Ground-level access for easy servicing and reduced downtime.

All components in accessible areas.

Engine sump reached via hinged belly plate.

Highly efficient Tier 3 engine

25% more power and 27% more torque than previous engine.

Greater reductions in fuel consumption.

Reduced noise and vibration.

JS AUTO LONG REACH | WALKAROUND

OPERATOR ENVIRONMENT | JS AUTO LONG REACH

Ergonomic, practical, comfortableA comfortable, fully adjustable seating position reduces operator fatigue while the high-backed suspension seat (as standard) provides excellent support. Behind the seat is a practical, net-covered shelf that is large enough for a lunch bag. A huge door provides easy access to the cab, with a completely flat floor suitable for easy cleaning.

ISO servo controlsAll controls are clear and easy to use. The excavator boom and dipper are servo-lever operated to ISO control pattern, independently adjustable to the seat. The joystick-mounted track gear selection makes changing travel speed easier, while the engine speed is controlled by a dial-type throttle plus servo-lever-mounted, one-touch idle control or selectable auto-idle with adjustable time delay. Secondary control switches are banked to the side of the levers so there is no need to turn around to activate the controls.

Superb operator environmentAs with all the models in the JS Auto range, meticulous attention to detail has been applied to every inch of the cab. It is JCB’s most stylish and well designed cab to date, with everything from the comfortable seat and servo controls positioning, to the handy radio mute button; all created for maximum ease of use and comfort.

Climate controlExcellent heating and ventilation ensure ideal working conditions. Variable blower speed, temperature and recirculation controls are all well marked out and simple to use. An optional climate-control system and heated, air-suspended seat are also available.

5 | 5

JS AUTO LONG REACH | VISIBILITY AND PERFORMANCE

All-round visibility and optimum performanceThanks to the large glass areas and carefully designed front, side and roof lights, operators can enjoy excellent digging, loading and positioning visibility – even in conditions that demand close working. Inside the cab, all major functions are controlled by JCB’s Advanced Management System (AMS). This on-board computer ensures maximum productivity at minimum operating cost by matching the engine and hydraulic system output to operator demand.

Gas-strut-assisted front windowThe cab presents a clear view overhead, enhanced by the positioning of the wiper motor. The front screen is very smooth to operate. The lower screen stores easily and securely within the top screen frame, while the complete front is gas-strut assisted for fast and convenient use. A roller blind protects from glare through the front or top screens.

Large wiper areaThe upper-screen, parallelogram-shaped wash wiper ensures a large, excellently wiped area for maximum visibility. The wiper motor is fitted in the left-hand side of the roof screen to avoid obstructing views of the bucket.

Excellent visibility to left and rightWith no obstructive cab structures to get in the way, there is high visibility of both tracks; particularly to the edge of the front right track. To the rear, the new, sleek low-level engine cover also gives excellent visibility.

Clear and easy to use The range has four working modes for maximum control and efficiency, all available at the touch of a button. The AMS monitor itself is compactly designed with a clear, easy-to-use interface, featuring: antiglare screen, clock, message display area, power mode indicator, operational hours display, warning lamps, track gear indicator, gauges for fuel, water temperature and hydraulic temperature.

Records service dataThe AMS records all the machine’s key operating data, helping diagnose any problems and proving invaluable when it comes to selling on. Increased diagnostics, without the need for a PC, make servicing easier and quicker. Records can be downloaded to a computer if needed.

Cushion controlThe ends of the main boom and dipper arm hydraulic rams are cushioned to prevent shock loadings, protecting your machine and making it more comfortable to operate. For convenience and efficiency, the cushion control is always on until deactivated. Deactivating cushion control gives faster cycle times for maximum productivity.

MAINTENANCE | JS AUTO LONG REACH

Ground-level accessService access is excellent. A hinged belly plate makes getting to the engine sump very simple and there is a quick-fit drain pipe for use on engine-oil and fuel-tank drain plugs. All the steps and top covers are fitted with non-slip, heavy-duty panels.

With the new Tier 3 engine comes true ground-level servicing, including a digital display as part of the in-cab AMS for engine oil checks, and remote engine oil and fuel filters. Ground-level servicing not only reduces downtime but is much safer for technicians working in the field.

Optimum cooling performanceThe Isuzu engine is designed for longevity and is helped by a bank of high-performing radiators mounted side by side. One is for the engine coolant, while a separate section is for the engine’s intercooler. A third section is designed for keeping the hydraulic oil cool. Keeping the engine at the optimum temperature helps maintain performance and reduce downtime. The coolers are easily maintained, accessible via swing-open doors.

Maintenance made easyFast, efficient maintenance is vital for ensuring the machine’s productivity levels remain at their highest. A machine is only as good as its component parts and if one of those components fails, however minor, it can reduce productivity, lower performance or bring the whole machine to a halt. Therefore, it is not only vital to use genuine JCB parts, but also to make sure the entire machine is regularly maintained.

The Advanced Management System (AMS)As well as ensuring maximum productivity at minimum operating costs, the AMS also monitors tracking hours and service data, offering diagnostic functions without the need to use a laptop computer. With three entry levels – the operator is only able to access the first level – service and machine data can be safely stored within the machine’s computer for future use.

JS AUTO LONG REACH | QUALITY

Built to lastEverything about the JS auto range indicates that it is built to last, offering maximum productivity over thousands of operational hours. Every single component has been carefully designed and manufactured to rigorous standards, ensuring long life, lower running costs and a high value when it finally comes to selling.

Reliable, protected hydraulic componentsThe JS auto range uses high quality, proven Japanese-made hydraulic components. In turn, these are protected by the highest standard Plexus filtration system, ensuring long hydraulic fluid and component life.

Modern designThe modern design incorporates superb damage protection as standard: curved side skirts and a big clearance over the tracks reduce damage to the superstructure; guards shield the undercarriage from debris; and cushion control on boom and dipper services reduces wear and tear on machine parts.

Regenerative circuitsRegenerative hydraulic systems provide faster cycle times and reduce fuel consumption.

Easy accessAll components are easily accessible, so it is easier to maintain, which in turn maximises productivity.

Greased and sealed for lifeTrack links are greased and sealed for life, reducing noise and extending operational track life.

1000-hour greasing intervalsBoth the boom base and dipper pin-shave 1000-hour greasing intervals to reduce service time and costs.

A

B

C

DE

FG

H

I

K

L

M

N

JS220 LC

J S 2 2 0 LC

STATIC DIMENSIONS

Dimensions in millimetres (ft-in) JS145 LC JS180 LC JS220 LC JS260 LC JS330 LC JS360 LC

A Track Length on Ground (mm) 2865 (9-5) 3370 (11-1) 3660 (12-0) 3840 (12-7) 3910 (12-10) 4021 (13-2)

B Undercarriage Overall Length (mm) 3605 (11-10) 4170 (13-8) 4460 (14-8) 4640 (15-3) 4510 (14-10) 4954 (16-3)

C Counterweight Clearance (mm) 905 (3-0) 1072 (3-6) 1066 (3-6) 1125 (3-8) 1190 (3-11) 1214 (3-11)

D Tail Swing Radius (mm) 2050 (6-9) 2338 (7-8) 2825 (9-3) 3000 (9-10) 3250 (10-8) 3460 (11-4)

E Overall Width of Superstructure (mm) 2410 (7-11) 2740 (8-11) 2549 (8-4) 2500 (8-2) 2990 (9-10) 2990 (9-10)

F Height Over Cab (mm) 2845 (9-4) 2987 (9-10) 2946 (9-8) 2980 (9-10) 3170 (10-5) 3202 (10-6)

G Height Over Grab Rail (mm) 2867 (9-5) 3014 (9-10) 3025 (9-11) 3059 (10-0) 3196 (10-6) 3220 (10-6)

H Ground Clearance (mm) 425 (1-5) 486 (1-7) 486 (1-7) 486 (1-7) 500 (1-8) 530 (1-8)

I Track Gauge (mm) 1990 (6-6) 2200 (7-2) 2390 (7-10) 2590 (8-6) 2600 (8-6) 2600 (8-6)

K Width Over Tracks (700 mm shoes) (mm) 2690 (8-10) 2900 (9-6) 3090 (10-2) 3290 (10-9) 3300 (10-10) 3300 (10-10)

K Width Over Tracks (800 mm shoes) (mm) – 3000 (9-10) 3190 (10-6) 3390 (11-1) 3400 (11-2) 3400 (11-2)

K Width Over Tracks (850 mm shoes) (mm) 2840 (9-4) – – – – –

K Width Over Tracks (900 mm shoes) (mm) – – 3290 (10-10) 3490 (11-5) 3500 (11-6) 3500 (11-6)

L Transport Length (mm) TBC TBC 12545 (41-2) 14510 (47-7) 16772 (55-0) 16982 (55-7)

M Transport Height (mm) TBC TBC 3025 (9-11) 3200 (10-6) 4103 (13-6) 4200 (13-8)

N Track Height (mm) 811 (2-8) 885 (2-11) 885 (2-11) 940 (3-1) 1026 (3-4) 1024 (3-4)

JS AUTO LONG REACH | SPECIFICATION

WORKING RANGE

Dimensions in millimetres (ft-in) JS145 LC JS180 LC JS220 LC JS260 LC JS330 LC JS360 LC

- Boom Length (mm) 7400 (24-3) 7266 (23-9) 8700 (28-6) 10270 (33-7) 12330 (40-5) 12330 (40-5)

- Dipper Length (mm) 5300 (20-7) 5183 (17-0) 6400 (21-0) 7950 (26-1) 9500 (31-2) 9500 (31-2)

A Maximum Reach (mm) 13100 (43-0) 13115 (43-0) 15600 (51-2) 18770 (61-6) 21660 (71-1) 21100 (69-2)

B Maximum Reach (on ground) (mm) 13010 (42-7) 12996 (42-6) 15490 (50-8) 18670 (61-3) 21560 (71-1) 21000 (68-9)

D Maximum Depth (mm) 10090 (33-1) 9998 (32-8) 11990 (39-3) 15410 (50-6) 17500 (57-4) 17040 (56-0)

E Maximum Height (mm) 12671 (41-6) 11698 (38-4) 12660 (41-5) 12882 (42-3) 15500 (50-9) 15830 (51-9)

F Maximum Dumping Height (mm) 10620 (34-8) 9400 (30-8) 10450 (34-3) 10780 (35-4) 13320 (43-7) 14350 (47-1)

G Minimum Dumping Height (mm) TBC 2830 (9-3) 1910 (6-3) 1960 (6-4) 3140 (10-3) 2440 (8-0)

H Bucket Struck Radius (mm) TBC 1200 (3-9) 1200 (3-9) 1200 (3-9) 1300 (4-3) 1300 (4-3)

I Minimum Swing Radius (mm) 2730 (9-0) 3890 (12-8) 5450 (17-9) 7370 (24-2) 7730 (25-4) 7730 (25-4)

J Minimum Swing Radius Height (mm) TBC 9150 (30-0) 10270 (33-7) 11030 (36-2) 13540 (44-4) 13540 (44-4)

K Maximum Ground Level Span (mm) TBC 13340 (43-8) 14000 (45-9) 17070 (56-0) 19960 (65-5) 19960 (65-5)

Bucket Rotation 182 ˚ 182 ˚ 182 ˚ 182 ˚ 182 ˚ 182 ˚

Dipper Tearout (kgf) TBC TBC 4500 2384 9062 9062

Bucket Tearout (kgf) TBC TBC 5900 8580 11992 11992

JS220LC

0

1

2

3

4

5

6

7

8

9

10

11

12

13

Met

res

17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Metres

I

B

A

JF

E

D

4m(13-1)

G

H

K

JS220 LC

JS220LC

JS220LC

WEIGHTS

Model 700 mm 800 mm 850 mm 900 mm

Operating Weight (kg) Ground Bearing

Operating Weight (kg)

Ground Bearing Operating Weight (kg)

Ground Bearing Operating Weight (kg)

Ground Bearing Pressure ( kg/cm²) Pressure ( kg/cm²) Pressure ( kg/cm²) Pressure ( kg/cm²)

JS145 LC 14,690 0.37 15,500 0.33 – –

JS180 LC – – – – – –

JS220 LC 23,242 0.44 23,492 0.39 – – 23,742 0.35

JS260 LC 28,162 0.52 28,329 0.46 – – 28,495 0.41

JS330 LC 39,104 0.66 39,504 0.58 – – 39,904 0.52

JS360 LC 40,815 0.68 41,705 0.59 – – 42,150 0.53


Model Bucket Linkage Max Bucket Weight (kgs) Max Bucket Capacity (m³) Max Bucket Width (m)

JS145 LC JZ70 50mm TBC TBC

JS180 LC

JS220 LC JS130 65mm TBC TBC

JS260 LC

JS330 LC JS180 80mm TBC TBC

JS360 LC

BUCKETS AND LINKAGE


Reach from swing centre

Load Point 4m 6m 8m 10m 12m 14m 16m 18m 20m Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg

9m 1270 * 1270 * 960 * 960 *

6m 1560 * 1560 * 1400 * 1400 * 1440 * 1420 980 * 980 *

3m 3090 * 3090 * 2220 * 2220 * 1850 * 1850 * 1670 * 1330 1070 * 980

0 3990 * 3990 3260 * 2460 2400 * 1680 1880 1220 1250 * 930

-3m 4370 * 3960 3610 2280 2440 1560 1810 1160 1570 1000

-6m 5350 * 4050 3610 2290 2450 1570 1990 1280

-9m 2430 * 2430 *




9m 1030 * 1030 *

6m 2440 * 2440 * 1950 * 1950 * 980 * 980 *

3m 5490 * 5490 * 3850 * 3850 * 3170 * 3140 2780 * 2240 1020 * 1020 *

0m 5520 * 5520 * 5440 * 4190 4010 * 2860 3120 2100 1180 * 1180 *

-3m 6410 * 6410 * 6130 * 3940 4100 2700 3040 2020 1540 * 1540

-6m 5720 * 3990 4140 2730 2580 * 2360

-9m

LIFT CAPACITIES – Trackshoes: 700mm, No bucket. JS145 LC


Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer.

Lift capacity front and rear.

Lift capacity full circle.





10m 1330 * 1330 *

6m 2330 * 2330 * 2290 * 2000 1700 * 1560 1270 * 1270 *

3m 4270 * 4270 * 3530 * 3530 * 2790 * 2320 2590 * 1840 2370 1470 1340 * 1300

0m 8050 * 6440 5990 * 4440 4630 * 3310 3300 2060 2710 1670 2260 1370 1500 * 1240

-3m 8340 * 5980 6810 * 4000 4960 2970 3120 1880 2590 1550 1980 * 1310 1820 * 1300

-6m 8940 * 6090 6740 * 3980 4900 2920 3090 1860 2600 1570 2500 * 1560

-10m 5660 * 5660 * 4400 * 4400 * 3460 * 3460 *




10 1080 * 1080 * 850 * 850 *

6m 1810 * 1470 1370 * 1130 840 * 840 *

3m 2540 * 2540 * 2310 * 2070 2030 * 1310 1880 * 1030 900 * 870

0m 4680 * 4680 * 6180 * 4620 4650 * 3490 3170 * 2170 2770 * 1750 2170 1140 1840 920 1000 * 800

-3m 4920 * 4920 * 7250 * 3920 4300 2290 3470 1840 2860 1500 2040 1020 1750 840 1190 * 800

-6m 6430 * 5850 7510 3780 5350 2750 3310 1700 2740 1390 2000 970 1530 * 910

-10m 8760 * 6490 6700 * 4140 4270 2260 3440 1820 2880 1520 2770 1460










15m

12m 1580 * 1580 * 1100 * 1100 *

9m 1670 * 1670 * 1560 * 1560 * 1100 * 1100 *

6m 2000 * 2000 * 1790 * 1790 * 1620 * 1620 * 1140 * 1140 *

3m 7270 * 7270 * 4100 * 4100 * 3190 * 3190 * 2610 * 2610 * 2220 * 2220 * 1930 * 1930 * 1720 * 1680 1550 * 1270 1230 * 1210

0m 3140 * 3140 * 7010 * 7010 * 4850 * 4850 * 3660 * 3660 * 2930 * 2930 * 2430 * 2430 2080 * 1900 1810 * 1480 1600 * 1150 1390 * 1110

-3m 4070 * 4070 * 6630 * 6580 5260 * 4560 3980 3420 3160 * 2660 2600 * 2100 2190 * 1670 1880 * 1330 1630 * 1100

-6m 5480 * 5480 * 7230 * 6370 5280 * 4240 4060 * 3120 3240 * 2410 2650 * 1910 2210 * 1540 1850 * 1250 1730 * 1180

-9m 7160 * 7160 * 6560 * 6560 * 4930 * 4260 3860 * 3080 3100 * 2360 2520 * 1870 2050 * 1530 1820 * 1400

-12m 7250 * 7250 * 5310 * 5310 * 4120 * 4120 * 3270 * 3270 2610 * 2510 2040 * 2020 1860 * 1860 *

-15m 3160 * 3160 * 2550 * 2550 * 1970 * 1970 * 1690 * 1690 *




15m

12m 2130 * 2130 * 1310 * 1310 *

9m 2200 * 2200 * 2060 * 2060 * 1300 * 1300 *

6m 2590 * 2590 * 2340 * 2340 * 2140 * 2090 1350 * 1350 *

3m 8610 * 8610 * 7160 * 7160 * 5150 * 5150 * 4040 * 4040 * 3350 * 3350 * 2870 * 2870 * 2520 * 2430 2260 * 1890 1810 * 1450 1450 * 1390

0m 3830 * 3830 * 8710 * 8390 6080 * 5950 4630 * 4470 3740 * 3450 3140 * 2700 2700 * 2130 2370 * 1680 1930 * 1320 1620 * 1290

-3m 4920 * 4920 * 7930 * 7310 6550 * 5070 5000 * 3810 4010 * 2970 3320 * 2360 2830 * 1890 2440 * 1520 1900 * 1270

-6m 6580 * 6580 * 8820 * 7100 6520 * 4740 5060 * 3500 4080 * 2720 3370 * 2170 2830 * 1760 2380 * 1450 2240 * 1360

-9m 8550 * 8550 * 7930 * 7300 6030 * 4770 4770 * 3460 3860 * 2660 3170 * 2130 2600 * 1750 2310 * 1610

-12m 8550 * 8550 * 6360 * 6360 * 4990 * 4990 * 4000 * 3660 3230 * 2820 2550 * 2290 2330 * 2160

-15m 3740 * 3740 * 3060 * 3060 * 2400 * 2400 * 2070 * 2070 *







Isuzu common rail, turbocharged intercooled direct injection, Tier 3 compliant engine.

Kawasaki load sensing, flow on demand, multi function, open centre hydraulic system.

Dual element type air cleaner with in cab warning system.

Automatic fuel system de-aeration.

Automatic engine warm up system.

Engine overheat prevention / warning system.

Automatic engine deceleration / idle function.

AMS machine monitor system with 4 selectable work modes.

Remote engine oil level check.

Plexus hydraulic oil filtration system.

Servo hydraulic oil filtration system.

Duel fuel intake filters with additional water seperator.

3 speed travel system – selectable from joystick control.

Auto operator cabin – pressurised; tinted safety glass with sun visor, opening front window with integrated lower glass storage, operator storage shelf with cargo net, ashtray and cigarette socket, mobile phone holder, radio mute switch, courtesy light, heater and demister, removable floor mat.

High back suspension seat.

Full hose burst check valve set up with overload warning device.

Horn.

Upperstructure and undercarriage underguarding.

Lockable service doors and engine cover.

Frame mounted toolbox.

Remote greasing for slew bearing.

Electric refuelling pump.

Handrails with non slip walkways.

Boom and mainframe mounted worklights.

Toolkit.

Quick connect engine oil drain.

Remote mounted easy access filters.

Cushion control.

Operators manual.

No lift tipping link.

Special counterweight for long reach work equipment (depending on model).

Standard work equipment.

500, 600, 700, 800 & 900 mm wide track plates (depending on model).

Auxiliary pipework.

FOPS level II operator cab protection.

Mesh screen guard.

ISO 63 or ISO 32 hydraulic oils.

Biodegradable hydraulic oil.

Lower windscreen wiper.

Rain visor (not available with FOPS protection or mesh screen guard)

Climate control.

Heated and air suspended high backed seat.

Radio.

Fire extinguisher.

Widecore radiator.

Visibowl or turbo II engine air pre cleaner.

P3 or carbon cab air intake filter.

Travel alarm.

JCB Buckets.

Fuel cooler.

Rear and side view camera system.

Customised paint.

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

As part of our dedication to looking at new, innovative ways to help you get

the most out of your machine, our latest development is JCB LiveLink: an

advanced machine monitoring system that enables you to better protect

your investment and accurately monitor and improve machine performance.

JCB LiveLink is a software system that enables JCB owners to monitor

and manage their machines remotely. All you need is a PC connected to

the internet. The LiveLink computer is built into the machine where it

collects information from a number of sensors. This information is sent,

using mobile communications technology, to JCB’s secure data centre.

Machine management information is then displayed to users via the

LiveLink website, by email or via mobile phone.

By providing you with information on the usage and productivity of your

fleet, JCB LiveLink enables you to keep track of each machine’s efficiency,

ensuring that you get the best value for money possible.

By providing information on the location, movement and activity of

machines, the system can also assist in ensuring machines are operated

at the correct times and helps to protect them from theft. And, JCB

LiveLink helps machine owners to confirm that their machines are well

maintained and in good health without having to travel around work sites

inspecting machines.

In response to increasing concerns regarding machine security, we now

also offer JCB Guardian as an option on every new JCB machine. JCB

Guardian is a package of theft protection and monitoring systems that

includes LiveLink telemetry along with *CESAR identification, immobiliser

technology and a host of optional locks and guards. It’s your peace of mind

solution that can also result in considerable insurance premium savings.

*Territory specific

Your machine – working efficiently, secure and in good health

JCB LiveLink and Guardian are the key to all three

JCB | LIVELINK

JCB Assetcare

Flexible aftercare solutions

JCB Assetcare is a range of flexible service options designed

to ensure you get the very highest standards of machine

servicing, no matter what your budget. It guarantees you the

optimum level of aftersales support, with highly skilled,

factory-trained engineers using genuine JCB parts and

lubricants to maintain maximum machine performance.

This allows your machine to be covered to maximise

uptime and profitability throughout its operating life.

JCB Assetcare offers you the following options, which can be tailor-made

to meet your specific requirements including excellence as standard:

For complete peace of mind and total budget predictability, your JCB

dealer can offer a Full Repair and Maintenance package, with a fixed

monthly sum covering all regular maintenance and necessary repairs

including Flexicare for excavators and wheeled loading shovels, to give a

pay by the hour alternative.

A JCB Service Agreement allows you to plan and manage your maintenance

budget over a period of hours, or years of machine use, as determined by

you. The price is maintained for the duration of the agreement and includes all

parts, lubricants, labour and travel to maximise your machine performance.

JCB Sure Price Service (pay as you go) includes all genuine JCB

lubricants, filters, greases and other parts and is carried out as you require

it. The all-inclusive price also covers labour, 100 point check and any

travel. Service intervals are hours based (usually every 500 hours) and no

prior agreement is required; simply advise your dealer when the machine

reaches the recommended service interval for great value for money.

JCB Machinery Protection Plan protects you against any unexpected

failure for up to 2, 3, 4 or 5 years or up to 10,000 hours depending on

machine type. You can take up a Machinery Protection Plan at any time during

the first three months of ownership, and the package is transferable on the

initial machine sale. Coverage options are 500, 1000, 1500 or 2000 hours

per year (model dependent).

JCB Driveline Protection Plan – sign up to a Service Agreement on

Backhoe or Loadall mechanical transmission machines and get FREE

Driveline Protection for every 1,000 hours you commit to (covers Engine,

Transmission and Axle).

For the full terms and conditions of the above programmes please speak to your local dealer.

JCB | ASSETCARE

“For complete peace of mind and cost predictability

choose JCB Assetcare.”

A few words about JCB

A groundbreaking, world class family business with a commitment

to supporting our customers and protecting the environment

A family company on a global scale. JCB is no ordinary company.

From the dreams of one man, Joseph Cyril Bamford, we have grown into

the world’s largest privately owned construction equipment company.

Since 1945, the same attention to detail, passion for progress and family

spirit has taken us from strength to strength.

Nowadays JCB operates across five continents, manufacturing at 18

factories in the UK, Brazil, Germany, China, North America and India.

With 1,500 dealer depots selling and supporting our products in over

150 countries, we are the global market leader for backhoe loaders and

telescopic handlers.

A history of world-class innovation. Our business has always

been driven by innovation, using only the most advanced technology,

meticulous design, precision engineering and rigorous testing. Evidence

of this commitment to innovation is illustrated in our revolutionary JCB

Dieselmax engine. Having grabbed the headlines when it smashed the

world diesel land speed record at 350.092mph, it is now providing our

customers with tomorrow’s performance today.

Doing things more efficiently, more sustainably. Since 2007 we

have reduced our carbon emissions by 20%. We are continually working to

further reduce the carbon footprint of our operations and, in partnership

with our suppliers, our whole supply chain. We are also committed to

designing our products to be sustainable during manufacturing, over

the life of the machine and through end-of-life recycling. Our new Eco

machines, for example, offer significant fuel and carbon savings; an average

of 16% on the Eco backhoes and 22% on the 8085 Eco.

JCB | A FEW WORDS

Parts Distribution Centres

Manufacturing Facilities Dealers

The best back-up in the business

Whether we’re providing you with support, parts or finance, we aim for 100% satisfaction. It’s all part of our

promise to put you, the customer, first

Wherever you are, we are. Our mission to provide world-class

support and deliver 100% satisfaction reaches into more than 1,500

dealer depots, spanning 150 countries across five continents. The aim?

To bring you global expertise at a local level. We truly believe no other

manufacturer does more to understand the subtle differences between

one region of the world and another. It’s a degree of attention that we

maintain at every level of the company and an assurance to our customers

that wherever they are in the world, JCB will fulfil their needs.

Trust the genuine article. At the heart of the support network is our

impressive World Parts Centre, a state-of-the-art facility operating 24/7

to dispatch more than a million genuine parts and attachments every

week to our dealers and international distribution centres. Because

we understand the need to minimise downtime, we utilise the latest

logistics and warehouse management systems and have committed to an

‘Anywhere in 24 hours’ strategy.

Keeping you up and running. Just as important as genuine JCB parts

are the people who fit and maintain them. Our JCB-trained technicians in

all of those 1,500-plus dealer depots provide excellent, expert customer

care, whether it’s routine servicing or something more urgent. If there is

an emergency breakdown situation, we need to act fast. This is why all

our dealers operate their own fleets of support vehicles, enabling parts to

be delivered quickly and fitted expertly, and fulfilling our promise to keep

our customers working.

Maximising earning potential. We grow as our customers grow.

That’s why, at JCB, we are committed to offering expert financial advice

and support to help customers maximise their earning potential.

Finance options* are available for new and used machinery, all part of

our dedication to helping customers preserve their working capital while

spreading costs in the most effective and tax-efficient way.

And as well as financial help, we are also happy to offer JCB Insurance.* We

specialise in construction and industrial insurance and in offering Insurance

Premium Finance facilities.

* Please check individual countries for available services.

JCB | BACK-UP

JCB Sales Limited, Rocester, Staffordshire, United Kingdom ST14 5JP. Tel: +44 (0)1889 590312 Email: [email protected] Download the very latest information on this product range at: www.jcb.com©2009 JCB Sales. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical, photocopying or otherwise, without prior permission from JCB Sales.

JCB reserves the right to change specifications without notice. Illustrations and specifications shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5552 03/11 Issue 1(T)

JS AUTO LONG REACH

Documents