Johanson Manufacturing Corporation • 301 Rockaway Valley Road, Boonton, New Jersey 07005 • Phone 973.334.2676 • Fax 973.334.2954 stay tuned • electronic accuracy through mechanical precision • www.johansonmfg.com Reliable resource for machined and electro plated parts since 1945 Swiss Screw Machine, CNC Milling and Stamping • In-house since 1945 • Over 200 years of combined machining experience • ISO 9001:2008 certified • ITAR Registered Material Capabilites • 360 Half Hard Brass • Kovar • Phosphor Bronze • Alloy 42 • Teflon • 303, 416, 440 Stainless Steel • Delrin • C11000 Copper Alloy • ABS Plastic • 6061-T6, 2011-T3 Aluminum • Titanium • Standard and exotic material capabilities • Invar 36 Johanson Manufacturing Corporation Geometry Capablities • Unlimited Geometries with milling, cross drilling, cross-tapping and saw slotting capabilities • Specialty threading up to 200 threads per inch, thread diameters up to 32mm • Standard Tolerances: +/- .0002 for diameters, and +/-.0005 for lengths Wire EDM Capabilities • AGIE, HSS 150 • Maximum work piece dimensions: 7” x 11” x 6” High • Tolerance: +/- .0002
2
Embed
Johanson Manufacturing Corporation1].pdf · Johanson Manufacturing Corporation • 301 Rockaway Valley Road, Boonton, New Jersey 07005 • Phone 973.334.2676 • Fax 973.334.2954
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Johanson Manufacturing Corporation • 301 Rockaway Valley Road, Boonton, New Jersey 07005 • Phone 973.334.2676 • Fax 973.334.2954stay tuned • electronic accuracy through mechanical precision • www.johansonmfg.com
Reliable resource for machined and electro plated parts since 1945
Swiss Screw Machine, CNC Milling and Stamping
• In-house since 1945 • Over 200 years of combined machining experience • ISO 9001:2008 certified • ITAR Registered
• Unlimited Geometries with milling, cross drilling, cross-tapping and saw slotting capabilities • Specialty threading up to 200 threads per inch, thread diameters up to 32mm • Standard Tolerances: +/- .0002 for diameters, and +/-.0005 for lengths
Wire EDM Capabilities • AGIE, HSS 150 • Maximum work piece dimensions: 7” x 11” x 6” High • Tolerance: +/- .0002
Johanson Manufacturing Corporation • 301 Rockaway Valley Road, Boonton, New Jersey 07005 • Phone 973.334.2676 • Fax 973.334.2954stay tuned • electronic accuracy through mechanical precision • www.johansonmfg.com
• In-house chemical laboratory to maintain chemistry of plating solutions• X-ray fluorescence for plating thickness measurements• Heat test for adhesion• Mechanical and visual inspections• Plating meets military and ASTM specifications• Compliance with federal and state environmental regulations• Closed loop wastewater treatment system• Over 60 years of plating experience
• Gold Mil - G - 45204 (Type I, Type II & Type III) • Copper Mil - C - 14550 • Silver QQ - S - 365 (Type III, Grade B) • Bright Tin Mil - T - 10727 & ASTM B545 • Tin/Lead 60/40 Mil - P - 81728 & ASTM B579 • Nickel QQ - N - 290 • Electroless Nickel Mil - C - 26074 • Passivation QQ - P -35 • Palladium Mil - P-45209B & ASTMB679 • Chromate - Brass