This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Job Name:
System Reference: Date:
Indoor Unit:PKA-A12HA7
Outdoor Unit:□ PUY-A12NKA7□ PUY-A12NKA7-BS
INDOOR UNIT FEATURES• Sleek, compact design• Simple installation• Vane setting for air flow direction control• Auto fan speed mode• Ideal for spaces such as server rooms, daycare centers, classrooms, churches, small offices, and more
OUTDOOR UNIT FEATURES• Variable speed INVERTER-driven compressor• Suction accumulator pre-charged with refrigerant volume for piping length up to 100 ft (70 ft. for A12/18/24/30)• Low ambient cooling down to -20ºF providing 100% capacity (only for PUY models with wind baffles installed)• 24-hour continuous operation (cooling mode)• High pressure protection• Fast restart due to bypass valve make it ideal for equipment cooling applications, such as data centers• Superior energy and operational efficiency
SUBMITTAL DATA: PKA-A12HA7 & PUY-A12NKA7(-BS)12,000 BTU/H WALL-MOUNTED AIR-CONDITIONING SYSTEM
Notes*Wind baffles required to operate below 23°F DB in cooling mode. PUY with wind baffle: -20°F - 115°F. Refer to windbaffle documentation for further information.**System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures
SEACOAST PROTECTION• External Outer Panel: Phosphate coating + Acrylic-Enamel coating• Fan Motor Support: Epoxy resin coating (at edge face)• Separator Assembly; Valve Bed: Epoxy resin coating (at edge face)• “Blue Fin” treatment is an anti-corrosion treatment that is applied to the condenser coil to protect it against airborne
Piping and wiring connection canbe made from the rear direction only.
*1 In the place where short cycle tends to occur, cooling and heating capacity and power consumption might get lowered 10%. Air outlet guide (optional PAC-SG58SG-E) will help them improve. *2 If air discharges to the wall, the surface might get stained.
2 sides should be open inthe right, left and rear side.
Min.100mm<3-15/16> as long as no obstacle is placed on therear and light-and-left sidesof the unit
*1*2 *1
Air intake
Air discharge4-oval hole
Air intake
Service panel
Connection for liquid pipe
Service panel for charge plug
Service port
Connection for gas pipe
Min.100mm<3-15/16>
Min.500mm<19-11/16>
Min.350mm<13-25/32>
Basi
cally
open
Max
.
<Foundation bolt height>
FOUNDATION
Please secure the unit firmlywith 4 foundation M10<W3/8> bolts.(Bolts, washers and nut must be purchased locally.)
18m
m<2
3/32
>
{33<1-5/16> drain hole
43.6
<1-2
3/32
>15
2<6>
155
400<15-25/32>
347.5<13-11/16>
45.4<1-25/32>
365<
14-3
/8>
330<
13>
300<
11-1
3/16
>
40<1-9/16>
Handle
600<
23-5
/8>
10<3
/8>
300<
11-1
3/16
>
150<5-29/32>287.5<11-11/32>
500<19-11/16>
800<31-1/2>
69<2-23/32>
183<7-7/32>
90<3
-17/
32>
155<
6-3/
32>
23<29/32>
32.5
<1-9
/32>
18<23/32>
FLARE {12.7<1/2>
FLARE {6.35<1/4>
Installation bolt pitch
PIPING-WIRING DIRECTION
Minimum installation space for outdoor unit
Free space around the outdoor unit(basic example)
FOUNDATION BOLTS
Unit: mm<in>
Air discharge
Air intake
Air intake
oval hole2-10×21
drain holeø 42 2-U Shaped notched holes
(Foundation Bolt M10<W 3/8>)
(Foundation Bolt M10<W 3/8>)
330<
13>
300<
11-1
3/16
>
40 <1-19/32>
404.5<15-15/16>
48<1
-29/
32>
360<
14-3
/16>
32.5
<1-9
/32>
500<19-11/16>
Min.500mm<19-11/16>
Min.100mm <3-15/16>
Service portFLARE 12.7 (1/2F)
Connection forgas pipe
FLARE ø
ø
6.35 (1/4F)Connection forliquid pipe
Service panelfor charge plug
Service panelEarth terminal
Terminal connectionLeft ... Power supply wiringRight ... Indoor/Outdoor wiring
23.2<15/16>
99.5
<3-1
5/16
>16
4.5<
6-1/
2>49
2<19
-3/8
>
185.5 <7-5/16>43 °
35 °
2-ø22.2<7/8>1/2 conduit hole
Installation bolt pitch
Handle for moving
22 <7/8>
320<
12-5
/8>
809 <31-7/8> 62 <2-15/32>
154.5 <6-3/32>
310 <12-7/32>
8.5<
11/3
2>
22.3 <29/32>
630
<24-
13/1
6>
Min.100mm<3-15/16>
Basic
ally
open
Min.350mm <13-25/32>
Max.
<Foundation bolt height>
18m
m<2
3/32
>
Free space around the outdoor unit(basic example)
100mm<3-15/16> or more as long asno obstacle is placed on therear and right-and-left sidesof the unit
2 sides should be open in the right, left and rear side.
Please secure the unit firmlywith 4 foundation (M10<W3/8>) bolts.(Bolts, washers and nut must be purchased locally).
FOUNDATION BOLTS
Piping and wiring connection canbe made from the rear direction only.
PIPING-WIRING DIRECTION
FOUNDATION
OCH636
FORM# PKA-A12HA7 / PUY-A12NKA7(-BS) - 201709
1340 Satellite Boulevard, Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com