JNTU B.tech 1st Year Engineering Workshop Lab Manual

Carpenter’s vice, steel rule, jack plane, try

per is firmly clamped in the carpenter’s vice and any two adjacent faces are planed by

Carpenter’s vice, steel rule, jack plane, try

2. The reaper is firmly clamped in the carpenter’s vice and any two adjacent faces are planed by

4. Round blocks (3No’s) are screwed onto the board, as per the diagram.

–

4. Round blocks (3No’s) are screwed onto the board, as p

Smith’s fo

1. One end of the bar is heated to red hot condition in the smith’s forge for the required length.

smith’s forge, anvil, ball

1. One half of the rod is heated to red hot condition in the smith’s forge.