JMV Exothermic Welding Connection for Electrical Installation

EXOTHERMIC JAM WELD

Welds of strength and integrity ...

All About Electrical Safety

STANDARD ITS MEETS OR EXCEEDS:

TOOL KIT :

JMV LPS Limited is an ISO certified leading

manufacturer, supplier and exporter of electrical

safety products compose of Maintenance Free

Chemical Earthing System, Exothermic Weld, Lighting

Protection System, Surge Protection Devices and

Conduit Pipes.

JMV JAM Weld provides the finest in permanent

bonding in welding in which no external heat or

power is required. It is the most preferred and most

accepted method all over the world for making

electrical connections of Copper to Copper and

Copper to Steel.

JAM Weld ensures best performance for all connections which are mechanically superior it’s the

most suitable option for all high current connections. JMV JAM weld connections are superior to

other type of connections which are subject to variations, ageing loosening and corrosion.

JMV EXOTHERMIC WELDING KIT

Molds

A graphite mold is used for exothermic welding connections.

The mold controls the direction and speed of the molten

weld metal flow and the formation of the weld.

Handle Clamps

Handles are required to hold the mold

ABOUT THE PRODUCT

Exothermic weld powder is a mixture of copper oxide and aluminum,

packaged by size in a plastic cartridge.

Cable Brush is used for cleaning heavily oxidized conductors

and surfaces prior to the welding connection.

Cable Cleaning Brush

Brush cleans any conductor and is especially useful for coarse or

very dirty conductors.

Disks are used to sea l the tap ho le .

Step 1

Clean the conductors to be welded. Place the cables into

position in the mold.

Step 2

Close the handle clamp to lock the mold. Place the disk

into position in the mold.

Flint Ignitors are used to ignite the starting material.

Slag Removal Spade useful for removing the slag from the mold

after the welding connection is completed.

Mold brush is useful for removing the slag from the mold after

the welding connection is completed.

PROCESS

DIFFERENT TYPES OF JOINTS

Please contact us atMobile No : +91 9910398538Email : [email protected]

For ordering the JAM Weld

Exothermic weld kit kindly provide detailed specification of the conductors that needs to be joint.

–

BENEFITS

HOW TO ORDER

Step 3

Place the weld metal into the mold. Sprinkle the starting

powder over the weld metal and on the lip of the mold.

Step 4

Close the cover and ignite using flint ignitor. Open the

mold after the metal solidifies. Remove the slag from

the mold before making the next connection.

It is efficient and superior to all existing surface –to-surface mechanical

retention connectors.

It is universally preferred method of making electrical Connections of Copper to Copper

or Copper to Steel. The current carrying capacity of exothermically jointed connection

is higher than the current carrying capacity of conductor. The joints resistance,

impedance and ampacity directly relate to the safety and functionality of the system.

JAMWELD meets these requirements and deliver assurance.