-0- JGAURORA 3D PRINTER Model:A-8 Operation Instructions www.jgaurora3d.com Read it before printing and keep it properly.
- 0 -
JGAURORA 3D PRINTERModel:A-8
Operation Instructions
www.jgaurora3d.comRead it before printing and keep it properly.
---3D printer user manual
- 1 -
---3D printer user manual
- 2 -
INTRODUCTION
A-8 is the new designed FDM big size 3d printer by Shenzhen
Aurora Technology Co., Ltd, which could print the plastic models you
have drawn.
A-8 Properties: This product adopt weldless steel as main body,
XY axis is transmited by rolling linear guide, Z axis is high accuracy
rolling ball screw rod, dual material feeding extruder structure, hot
bed coverd HBG. Thus, keep higher resolution, more stable, less
shake, easy to take off models.
Special notice:
1. All content in this manual is strictly checked, if have any printing
errors or misunderstandings on the content, Shenzhen Aurora
reserves the rights of interpretation.
2. Any update information, will not notify.
---3D printer user manual
- 3 -
Security Considerations
Do not touch the extruder and hot bed, when machine
working, temp. of extruder will be about 200 centigrade, hot bed
could be 110 centigrade.
Do not put your hand into machine when printing, in case of
crushing.
The power supply use 110V-220V~50HZ alternating current,
the tripod socket must be grounded, don’t add another power, in case
of fire or electric shock.
We suggest you wear safety goggles when tear off supports
of models.
Put the machine at a drafty room, some smells from the
material may let you uncomfortable, especially ABS material.
Pls take consideration of the following below, in case of damage and
danger.
---3D printer user manual
- 4 -
Product Details1. Product Details
Model:A-8 Nozzle diamater:0.4mm
Layer thickness:0.05-0.3mm Machine size: 590*450*568mm
Printing speed:10-150mm/s Machine weight:32KG
XY axis position accuracy:0.05mm Packing size:700*570*680mm
Z axis position accuracy:0.015mm Packing weight:36KG
Material: ABS、PLA Build size:350*250*300mm
Material tendency:PLA LED Display:yes
Material diamater:1.75mm Offline printing:support
Software language:English, French,Germany, Italian, ect File format:STL、G-Code、OBJ
Function of support:automatically OS:windows(linux、mac)
Software:Cura Working condition:10-30℃,Humidity20-50%
2. Name of machine parts
Pic 1
---3D printer user manual
- 5 -
3. Extruder analysis
SN Name QTY
1 quick coupling 1
2 Machined part A 1
3 bearing 1
4 turbofan 1
5 Heating block 1
6 40*40 fan 1
7 Metalsheet A 1
8 K-Thermocouple 1
9 Temp. sensor 1
10 Heating pipe 1
11 nozzle 1
12 Stepper motor 1
13 M6 nuts 1
16 heatsank 1
17 cover 1
18 gear 1
21 Machined B 1
22 spring 1
23 Winding mouth 1
24 Filament pipe 1
Pic 2
Pic 3
---3D printer user manual
- 6 -
4. Tools list
Pic 4
---3D printer user manual
- 7 -
Software-Cura
1. Cura14.07 installation
Way to find Cura:a. SD card b. Download from website c. Steps of
installtion
Where to find the Cura in the SD card
(1) Connect your SD card to computer, open SD card files.
Pic 5
Pic 6
Pic 7
(2) Download from website
Link:https://ultimaker.com/en/cura-software/list
Choose the corresponding OS to download it.
---3D printer user manual
- 8 -
(3) Steps of installation
Double click ,follow the steps to install it.
Pic 9
Pic 8
---3D printer user manual
- 9 -
Pic 10
Pic 11
---3D printer user manual
- 10 -
Pic 13
Pic 14
---3D printer user manual
- 11 -
Pic 15
Pic 16
---3D printer user manual
- 12 -
Pic 17
Pic 18
---3D printer user manual
- 13 -
Pic 20
Pic 19
---3D printer user manual
- 14 -
Click “ok”.
Pic 211
Configuration loading. Choose “ Switch to full settings”.
Pic 22
Pic 21
---3D printer user manual
- 15 -
Place of configuration file: computer/the file you saved/
software/installation/peizhiwenjian.ini
Pic 24
Pic 23
---3D printer user manual
- 16 -
After Loading, the basic and advanced configuration will be changed
to the A-8 regular printing configuration.
Set “ print all at once”.
Pic 25
Pic 26
---3D printer user manual
- 17 -
2. Settings of Cura
Pic 27
Pic 28
---3D printer user manual
- 18 -
Pic 29
Pic 30
---3D printer user manual
- 19 -
Pic 32
Pic 31
---3D printer user manual
- 20 -
Pic 33
Pic 34
---3D printer user manual
- 21 -
Pic 36
Pic 35
---3D printer user manual
- 22 -
Pic 37
Pic 38
---3D printer user manual
- 23 -
Basic setting of model in the software
Pic 39
Pic 40
---3D printer user manual
- 24 -
Pic 41
Pic 42
---3D printer user manual
- 25 -
Pic 43
Pic 44
---3D printer user manual
- 26 -
3. Software expert mode
Pic 45
Pic 46
---3D printer user manual
- 27 -
Pic 48
Pic 47
---3D printer user manual
- 28 -
Pic 49
Pic 50
---3D printer user manual
- 29 -
Pic 51
Pic 52
---3D printer user manual
- 30 -
Pic 53
---3D printer user manual
- 31 -
Printer Operating
1. LCD display interface
2. Filament feeding
Pic 55Pi
Assemble the filament holder with M6 screw and allen wrench.
Pic 54
Pic 56
According to the instructions below to preheat the material, wemake PLA as a example.
Pic.55
---3D printer user manual
- 32 -
cutting a small bevel angle at the beginningof filament a and straight the filament
driven wheel .
Pic 57
Pic 58
Press feeding wheel
---3D printer user manual
- 33 -
Pic 59
Pic. 60The material will flow out freely.
---3D printer user manual
- 34 -
Pay attention to these notice:
(1)Please change the filament when length of filament remained is
less than 15cm, Please do change in time. never feed all remainded
filament into the feeding mouth totally.
(2) When filament change, the extruder temp. should be over 170
centigrade.
---3D printer user manual
- 35 -
3. Platform adjustment
Do the following steps: Prepare a A4 paper and put it between the hot end and hot bed all around the corners, make sure the paper cannot out of their, that means it is the right distance.
Pic.61
Pic.62
Pic.63
---3D printer user manual
- 37 -
Pic 65
Pic.64
---3D printer user manual
- 38 -
4.Trial printing
(1) SD card offline printing
Pic.66
---3D printer user manual
- 39 -
Pic 67
Pic 68
Gcode generating
---3D printer user manual
- 40 -
Start to print.
Pic 70
Select “Print from SD” from LCD display---Select the gcode you are
going to print (such as : 123.gcode). The printer will be automatically
heating up to the temp. which has setted in the software , then press
the rotary button, the printer will automaticlly work up.
*The distance between nozzle and platform is one of the most
important factor that effect the printing result.
Far distance: Fine round , uneven, gap and tilt . In this case, printing
Pic 69
---3D printer user manual
- 41 -
is not good and easy to move.shown as picture:
Close distance: the path is too flat and the side of path will upwrap,
what’s more, it will damage the nozzle, show as pic 72.
Right distance:Flat skinning, gapless, shown as picture 73:
Pic 71
Pic 72
---3D printer user manual
- 42 -
Pic 73
(2)USB online printing Adjust as below:
Pic.74
---3D printer user manual
- 43 -
Modifying Serial port Number( Serial port is according to computer)
and Baudrate setting(115200).
Pic 75
Pic 76
Pic 77
Click print
Extruder and hot bedis hearing up
---3D printer user manual
- 44 -
FAQ and Solutions
1. To solve the plugging problem:
Pic 78
Pic 79
Printingnow
The progress of printing
Open the upper cover.
---3D printer user manual
- 45 -
Pic 80
Pic 81
Pic 82
Preheat the extruder first.
1. Screw off thetwo screws.
2. pull off thecover.
3. pull off the fanand hearsank.
Press the joint
Pull off the filaments pipeby other hand
---3D printer user manual
- 46 -
Pic 83
Pic 84
Use the 2mm allen wrench to pock the feeding nozzle.
Cut down the filament and pull it off.
---3D printer user manual
- 47 -
Phenomena Reason Solution
2 slip Filament is too thin Cut the thin filament
3Temp. is
unusual
Broken temp.
sensorChange a new one
4
Printing not at
the right
position
Screw is loose Lock the screws
5The model is
warped
The hot bed is not
at a levelAdjust hot bed
6Cannot
generate gcode
Don’t set the
right setting or
save as wrong save
path
Choose the right
machine type and
change the right path
7Software
cannot installOS difference
Change computer and
OS
---3D printer user manual
- 48 -
MaintenanceImportant ListsHow to operate the printer at the right way:a. Pls refer to the USER MANUAL before printing, do preparation of hot bed
adjustment first.b. When finished printing, the filament should keep sealing, avoid moisture.c. Preheat the extruder first when do printing next time, let extruder
auto-push filament for a while.d. Machine should do some regular maintenance, drop some lubricating oil
on thread rod, polished rod and bearings to avoid fatigue wear.e. Do not let the fan and air-condition blow to the hot bed when printing.f. Keep the working condition at “Temp:10-30℃,Humidity:20-70%”.
All products should be inspected and test strictly over 48 hours, you can enjoyyour printing work freely.
Contact information of maintenance service
Contact information:Tel: 0086-755-29735649E-mail:[email protected]: :Floor 5th, Building A, Zone C, Longquan Technology Park, Huatian Road, Dalang subdistrict, Longhua district, Shenzhen, China 518109 518109