-
2414 GI/2018 (1)
jftLVªh laö Mhö ,yö&33004@99 REGD. No. D. L.-33004/99
vlk/kj.k
EXTRAORDINARY
Hkkx II—[k.M 3—mi&[k.M (i) PART II—Section 3—Sub-section
(i)
izkf/dkj ls izdkf'kr PUBLISHED BY AUTHORITY
la- 277] ubZ fnYyh] श�ुokj] vizSy 27] 2018@वैशाखवैशाखवैशाखवैशाख
7] 1940 No. 277] NEW DELHI, FRIDAY, APRIL 27, 2018/VAISAKHA 7, 1940
िव�तुिव�तुिव�तुिव�तु म�ंालयम�ंालयम�ंालयम�ंालय
अिधसचूनाअिधसचूनाअिधसचूनाअिधसचूना नई �द� ली, 26 अैल, 2018 सा.का.िन.
सा.का.िन. सा.का.िन. सा.का.िन. 409409409409(अ(अ(अ(अ).—के� �ीय सरकार,
ऊजा संर�ण अिधिनयम, 2001 (2001 का 52) क� धारा 56 क� उप धारा (2) के
ख� ड (च), (छ), (ट), (ठक) और (ठकक) के साथ प�ठत धारा 14 के ख� ड (छ)
और (ण), धारा 14 क और 14 ख क� उप धारा (1) और उप धारा (2) 'ारा (द*
शि,य- का (योग करते 0ए, 2 यूरो के परामश से ऊजा सरं�ण (अिभिहत उपभो6
ता7 के िलए ऊजा खपत (माप और मानक, (9प, : क�म क� समय सीमा, तैयार करने
का तरीका और काया� वयन, ऊजा बचत (माण-प> जारी करने क� (?@या और खपत
क� गई ऊजा के समतुC य मी�Dक टन तेल का मूC य) िनयम, 2012 का और संशोधन
करने के िलए िनF निलिखत िनयम बनाती ह,ै अथात् : — 1. सिं�� तसिं��
तसिं�� तसिं�� त नाम और ारंभ नाम और ारंभ नाम और ारंभ नाम और ारंभ
:::: — (1) इन िनयम- का सिं�J त नाम ऊजा सरं�ण (अिभिहत उपभो6 ता7 के
िलए ऊजा खपत (माप और मानक, (9प, : क�म क� समय सीमा, तैयार करने का
तरीका और काया� वयन, ऊजा बचत (माण-प> जारी करने क� (?@या और खपत क�
गई ऊजा के समतुC य मी�Dक टन तेल का मूC य) संशोधन िनयम, 2018 ह।ै (2)
ये राजप> मL इनके (काशन क� तारीख से (वृN त ह-गे। 2. ऊजा संर�ण
(अिभिहत उपभो6 ता7 के िलए ऊजा खपत (माप और मानक, (9प, : क�म क� समय
सीमा, तैयार करने का तरीका और काया� वयन, ऊजा बचत (माण-प> जारी
करने क� (?@या और खपत क� गई ऊजा के समतुC य मी�Dक टन तेल का मूC य)
िनयम, 2012 (िजसे इसमL इसके पP चात् मूल िनयम कहा गया ह)ै मL िनयम 1
के उप िनयम (1) क� उQेिशका मL श2 द- 'ऊजा बचत (माण प> जारी करने क�
(?@या' के : थान पर 'ऊजा बचत (माण प> जारी करने या @य क� (?@या' श2
द रखे जाएंगे। 3. मूल िनयम- मL, िनयम 2 के उप िनयम (1) मL, (क) िवSमान
ख� ड (ठ) के िलए, िनF निलिखत रखा जाएगा, अथात् : —
-
2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
‘(l) “िविश� टिविश� टिविश� टिविश� ट ऊजा� खपत'' ऊजा� खपत'' ऊजा�
खपत'' ऊजा� खपत'' ऊजा सघन उSोग- और अ� य : थापन- के िलए :- (i) (i)
(i) (i) उ�ोग� के िलउ�ोग� के िलउ�ोग� के िलउ�ोग� के िलए : ए : ए : ए :
''िविशU ट ऊजा खपत'' अथात् िनवल ऊजा इनपुट का एC युिमिनयम, सीमLट, 6
लोर एC कली, उवरक, आयरन और : टील, कागज और लुगदी तथा व: > उSोग- के
अिभिहत उपभो6 ता7 क� अिभिहत उपभो6 ता सीमा7 मL अनुपात ह,ै जो संबंिधत
अिभिहत उपभो6 ता क� सीमा के अंदर तैयार ?कए गए समतुC य (मुख उN पाद के
कुल आउटपुट के साथ होता ह,ै इसक� गणना िनF निलिखत सू> से क� जाए :-
िविशU ट ऊजा खपत = अिभिहत उपभो6 ता क� सीमा मL िनवल ऊजा इनपुट अिभिहत
उपभो6 ता क� सीमा मL तैयार समतुC य (मुख उN पाद का कुल आउटपुट और तेल
समतुC य के मी�Dक टन (टीओई) / (ित यूिनट समतुC य उN पाद के संदभ मL
अिभY य6 त; (ii) (ii) (ii) (ii) थम�ल पावर " टेथम�ल पावर " टेथम�ल
पावर " टेथम�ल पावर " टेशन के िलए : शन के िलए : शन के िलए : शन के
िलए : िविशU ट ऊजा खपत या िनवल ताप दर थमल पावर : टेशन या संयं>-
के संबंध का अथ ह ैऑ6 सीलरी पावर खपत (एपीसी) के (भाव को गणना मL लेकर
बस बार पर ?कलो वॉट घ�टा (केड2 C यूएच) के संदभ मL िनवल उN पादन के
साथ ?क. कैलोरी (?क कैल) के संदभ मL अिभिहत उपभो6 ता सीमा मL िनवल ऊजा
इनपुट का अनुपात और इसे िनF निलिखत सू> के अनुसार ?कलो कैल / ?कलो
वॉट घ� टा के 9प मL Y य6 त ?कया जाता ह ैतथा गणना क� जाती ह:ै- िनवल
ताप दर = सकल ताप दर [1-एपीसी (%)];” जहां; - सकल ताप दर िनवल ऊजा
इनपुट का ?कलो कैलोरी के साथ ?कलो वॉट घ� टा मL सकल उN पादन का अनुपात
ह;ै - थमल पावर : टेशन / संयं> क� ऑ6 सीलरी िवSुत खपत (एपीसी) मL
से कॉलोनी के (ितशत मL ऊजा खपत घटाकर; (iii)(iii)(iii)(iii) पे#ोिलयम
%रफाइनरी �े) के िलए : पे#ोिलयम %रफाइनरी �े) के िलए : पे#ोिलयम
%रफाइनरी �े) के िलए : पे#ोिलयम %रफाइनरी �े) के िलए : पेDोिलयम
�रफाइनरी �े> के िलए ‘िविशU ट ऊजा खपत’ िजसे एमबीएन मL मापा जाता ह
ैअथात् िमिलयन ि^�टश थमल यूिनट (एमएमबीटीयू) (ित एक हजार बैरल (ित ऊजा
कारक और इसे िनF निलिखत के संदभ मL अिभY य6 त ?कया जाता ह,ै अथात्:-
एमबीएन ==== एमएमबीटीयू/एमबीबीएलएस/एनआरजीएफ जहां; एमएमबीटीयू :
एमएमबीटीयू (िमिलयन मी�Dक ि^�टश थमल यूिनट) मL गणना क� गई पेDोिलयम
�रफाइनरी यूिनट क� िनवल ऊजा और हािन एमबीबीएल : क_ च ेतेल के ससंािधत
एक हजार बैरल एनआरजीएफ : एनआरजी कारक (एनआरजीएफ) एक �रफाइनरी क�
ज�टलता के : तर का सकेंतक ह।ै कुल िमलाकर ऊजा कारक (आयाम रिहत यूिनट)
क� गणना (N येक यूिनट और इसके संगत ऊजा कारक मL फ�ड क� मा>ा के
आधार पर �रफाइनरी के िलए क� जाती ह।ै”;’ (iv) (iv) (iv) (iv) "रेलवे
�)े के िलएरेलवे �)े के िलएरेलवे �)े के िलएरेलवे �)े के िलए ::::
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 3 ((((क) ) ) )
आंचिलकआंचिलकआंचिलकआंचिलक रेलवेरेलवेरेलवेरेलवे : या>ी सेवा7 और
सामान क� सेवा7 मL आंचिलक रेलवे के िलए िविश` ऊजा क� खपत िनF नानुसार
Y य6 त क� गई ह:ै (i) डीजल Dै6शन के िलए :----एसईसी लीटर मL (ित हजार
सकल टन ?कलो मीटरेज मL डीजल क� खपत का अनुपात है और इसे िनF निलिखत के
9प मL Y य6 त ?कया जाएगा। "िलटर / 1000 जी टी ?क. मी." (ii) िबजली के
Dै6शन के िलए :---- एसईसी ?कलोवॉट घ� टा मL (ित हजार सकल टन ?कलो
मीटरेज मL िवSुत ऊजा क� खपत का अनुपात ह ैऔर इस ेिनF निलिखत के 9प मL
Y य6 त ?कया जाएगा। "?कलो वॉट घ� टा / 1000 जी टी ?क. मी." ((((ख))))
“उ, पाउ, पाउ, पाउ, पादन इकाइया ं :दन इकाइया ं :दन इकाइया ं :दन
इकाइया ं : िविशU ट ऊजा खपत तेल समतुC य के ?कलो bाम (केजी ओई) के साथ
उN प� न होने वाली समतुC य यूिनट क� संc या है और इसे केजी ओई / उत्
प� न समतुC य यूिनट क� संc या के संदभ मL िलया जाएगा और इस ेिनF
निलिखत सू> मL Y य6 त ?कया जाएगा, अथात् :- ?कलोbाम तेल के समतुC य
कुल ऊजा खपत (केजीओई) एसईसी =
--------------------------------------------------------- उNपा?दत
समतुC य यूिनट क� कुल सcंया (v) “(v) “(v) “(v) “िड" कॉिड" कॉिड"
कॉिड" कॉम से/ टम से/ टम से/ टम से/ टर के िलए र के िलए र के िलए र के
िलए (ितशत मL पारेषण और िवतरण क� हािन को पीएटी योजना के अधीन िबजली
िवतरण कंपिनय- के ऊजा िनU पादन का आकलन करने मL उपयोग ?कया जाएगा
िजसक� गणना िनF निलिखत सू> से क� जाएगी, अथात् :- टीए� डडी हािन
(%) = {1- ( कुल िबल क� गई ऊजा / िनवल इनपुट ऊजा)*100} जहां: - कुल
िबल क� गई ऊजा (िमिलयन ?कलोवॉट घ� टा) एक िनवल िबल क� गई ऊजा ह ै (ऊजा
कारोबार के िलए समायोिजत); - िनवल इनपुट ऊजा (िमिलयन ?कलोवॉट घ� टा)
ऊजा पारेषण हािन और ऊजा कारोबार के समायोजन के बाद िवतरण के दायरे मL
(ाJ त ऊजा ह।ै (vi) ''(vi) ''(vi) ''(vi) ''वािणि1यक भवन या ित�
ठावािणि1यक भवन या ित� ठावािणि1यक भवन या ित� ठावािणि1यक भवन या ित�
ठान� के िलएन� के िलएन� के िलएन� के िलए ::::---- िविशU ट ऊजा खपत
वािणिeयक भवन या (ितfान- के िलए : इमारत- के िलए िविशU ट ऊजा खपत का
अथ ह ै�े>फल के (ित हजार वग मीटर के समतुC य तेल के टन के संदभ मL
अिभY य6 त वाgषक ऊजा खपत, जहा ंऊजा का उपयोग ?कया जाता ह ैऔर इसमL
इमारत- का : थान शािमल है तथा यह िनF निलिखत सू> से Y य6 त ह:ै -
एसईसी = तेल समतुC य टन (टीओई) मL वाgषक ऊजा खपत कुल िनgमत �े>फल
के अलावा पाhकi ग और भ� डारण (हजार वग मीटर) और टीओई / हजार वग मीटर
के संदभ मL अिभY य6 त जहाँ, - भंडारण अपिशU ट व:तु7 के भंडारण के 9प
मL प�रभािषत ?कया गया ह।ै
-
4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(vii) “(vii) “(vii) “(vii) “पे#ोरसायन स/े टपे#ोरसायन स/े
टपे#ोरसायन स/े टपे#ोरसायन स/े टर के िलए : र के िलए : र के िलए : र
के िलए : िविश� टिविश� टिविश� टिविश� ट ऊजा� खपत ऊजा� खपत ऊजा� खपत
ऊजा� खपत, @ैकर यूिनट और माj यिमक यूिनट- मL खपत क� गई िनवल ऊजा जहां
केवल ओले?फन उN पाद- का उN पादन होता ह ै/ ओले?फन उN पाद- का कुल
समतुC य उN पादन तथा मी�Dक टन तेल समतुC य (टीओई) / (ित यिूनट समतुC य
उN पाद के संदभ मL अिभY य6 त; िनवल ऊजा खपत (टीओई) एसईसी =
------------------------------------------------------------ '; टन
मL उN पा?दत उN पाद- मL ओल?फन क� समतुC य मा>ा (ख) खंड (ण) के बाद,
िनF निलिखत ख� ड (ित: थािपत ?कए जाएंगे, अथात् :- ‘(ण.क)
''''''''पा)पा)पा)पा) इकाईइकाईइकाईइकाई'''''''' का अथ ह ैरिज: Dी के
साथ पंजीकृत कोई अिभिहत उपभो6 ता िजसे अिधिनयम क� धारा 14 के ख� ड (छ)
और (त) के अनुपालन हतुे ऊजा बचत (माण प> जारी ?कए गए ह,ै जारी ?कए
जाने हl, उसे खरीदने क� पा>ता ह ैऔर उ6 त अिभिहत उपभो6 ता7 ने अपने
ऊजा खपत के (माप- को अभी पूण ?कया ह ैऔर वे ऊजा बचत (माण प>
(ईएससट) के Y यापार के इ_ छुक हl; (ग) खंड (छ) के बाद िनF निलिखत खंड
रखा जाएगा, अथात् - '(छ. क) ''रिज" #ीरिज" #ीरिज" #ीरिज" #ी''''''''
का अथ ह ैकL �ीय िवSुत िविनयामक आयोग (ऊजा बचत (माण प> के कारोबार
के िलए शतm और िनबंधन) िविनयम, 2016 के अधीन के� �ीय सरकार 'ारा
अिभिहत एजLसी जो िवSुत आदान (दान पर ऊजा बचत (माण प>- क� िब@� और
खरीद मL भाग लेने के (योजन हतुे होती ह ैऔर उ6 त िविनयम के अधीन इसे
सnपे गए अ� य काय करेगी।’ 4. मूल िनयम- मL, िनयम 4 के उप-िनयम (1) मL,
- (क) ख� ड (ग) मL श2 द- 'जो ऊजा खपत को (भािवत करती ह'ै के : थान पर
''िविशU ट ऊजा खपत को (भािवत करती ह”ै रखे जाएगें; (ख) ख� ड (छ), मL
मद (i) के : थान पर िनF निलिखत मद को रखा जाएगा, अथात्: - “(झ)
अप�रहाय घटना।" 5. मूल िनयम- मL, िनयम 6 के, उप िनयम (4) के, ख� ड
(ड.) के : थान पर, िनF निलिखत ख� ड रखा जाएगा, अथात्:- “(ड.) को भी
िवचार मL लेना, (i) उजा खपत (माप- और मानक- का अनुपालन सिुनिpत करने
के िलए, इन िनयम- क� अनुसूची 1 और अनुसूची 2 मL िनqदU ट �े> िविशU
ट ?दशािनदrश; (ii) आकलन के िलए (?@या, िजसमL यह शािमल होगा sकंतु िनF
निलिखत तक सीिमत नहt होगा,-“ (क) द: तावेज- के पुनgवलोकन मL, िजसमL :-
(i) आंकड़- और इसका vोत का पुनgवलोकन तथा जानकारी क� शुwता, और दी गई
जानकारी का िनवचन अंतविलत हो;
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 5 (ii) लेखा
संपरी�ा �रपोट मL उपल2 ध कराई गई जानकारी और य?द लेखा संपरी�ा �रपोट
मL (यु6 त vोत- से िभ� न तुC य जानकारी उपल2 ध ह,ै के बीच (ित-जांच,
उन अ� य vोत- से जानकारी और : वतं> पृU ठभिूम अ� वेषन अंतविलत ह;ै
(ख) अनुवतx कारवाई, िजसमL :- (i) : थल दौरे, अिभिहत उपभो6 ता के उN
तरदायी काgमक- के साथ सा�ाN कार; (ii) यह सुिनिpत करने को सा�ाN कार
?कए गए काgमक 'ारा (दN त जानकारी क� (ित-जांच करना ?क कोई संगत
जानकारी का लोप या अिधक या कम मूC यां?कत नहt क� गई ह;ै (iii) सू>-
और गणना7 के अनु(योग का पुनgवलोकन करना और सN यापन �रपोट के िनU कषy
क� �रपोट करना।'' 6. मूल िनयम- मL, िनयम 8 के, उप िनयम (10) के, ख� ड
(ख) के : थान पर, िनF निलिखत ख� ड रखा जाएगा, अथात्:- “(ख) िविनqदU ट
ऊजा के तेल समतुC य मी�Dक टन क� मा>ा जांच सN यापन के कारण पहचाने
गए अनुिचत लाभ क� वजह से और ऊजा के उ6 त मा>ा के मूC य क� गणना
संबंिधत च@ के आकलन वष के आधार पर िनयम 16 के अनुसार क� जाएगी ।” 7.
मूल िनयम- के, िनयम 9 मL, - (अ) उप िनयम (1), मL, ख� ड (ख) के बाद िनF
निलिखत ख� ड डाला जाएगा, अथात्:- “(खक) उ6 त �े> मL कम से कम एक
�े> िवशेष| ने आवेदन ?कया ह ैिजसे 10 वष से अिधक अनुभव ह,ै य?द एईए
के पास एक िविशU ट �े> मL आवP यक अनुभव ह ैतो इसे �े> िविशU ट
अनुभव माना जाएगा; (खख) एईए फम का सूचीयन �े> िविशU ट और फम 'ारा
िनयु6 त �े> िवशेष|- के अनुभव के आधार पर होगा।” (आ) उप िनयम (4)
के िलए, िनF निलिखत उप िनयम अंत:: थािपत ?कया जाएगा, अथात्; “(4) इस
(कार (ाJ त आवेदन- क� संवी�ा उप िनयम (1) के (ावधान- के अनुसार क�
जाएगी और इस वातालाप मL िनयम 10 मL िनqदU ट कतY य-, िजF मेदा�रय- और
बाj यता7 को शािमल ?कया जाएगा जो उनके सहयोिगय- तथा �े> के िवशेष|-
के िवषय मL होते हl और पा> आवेदक- का एक पैनल तैयार ?कया जाएगा
िजसे 2 यूरो क� वेबसाइट पर (दgशत ?कया जाएगा।” (इ) उप िनयम (5) के अंत
मL, िनF निलिखत श2 द जोड़े जाएंगे, अथात् :- “और इस ेमौजूदा (चिलत
(ावधान- के आधार पर (N येक पाचं वष मL नवीकृत ?कया जाएगा।” (ई) उप
िनयम (6) के बाद िनF निलिखत उप िनयम डाले जाएंगे, अथात् :- “(7) (क) 2
यूरो 'ारा उप िनयम (5) मL सदंgभत फम का सूचीयन रQ करना, य?द यह सN
यापन या जांच सN यापन के काय का िनU पादन करने के दौरान अिधिनयम या इन
िनयम- मL िनqदU ट उपबधं- मL से ?कसी का पालन करने मL िवफल रहता ह ैऔर
य?द इनके साथ उ6 त अननुपालन सहवतx ह ै- (i) Y यावसाियक कदाचार के
बराबर आदशे या चकू; या (ii) ऊजा क� खपत पर त~ य या डटेा या �रपोट का
गलत िन9पण; या
-
6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) धोखाधड़ी के बराबर कोई कृN य; या (iv) य?द नािमकाबw Y यि,
अपने नािमकाबw दल का अनरु�ण करने मL िवफल रहता ह ैय?द दल के ?कसी सद:
य ने उ6 त फम को छोड़ ?दया ह ैऔर प�रणाम: व9प �र6 त : थान उ6 त �रि, क�
तारीख स ेतीन माह के अंदर क� अविध मL भरा नहt गया ह ै: पर� तु ?कसी भी
फम को सुनवाई का अवसर ?दए िबना 2 यूरो 'ारा उसे िनर: त नहt ?कया
जाएगा। (ख) फम क� मजबूती पर रहने वाले ऐसे (N येक Y यि, को ख� ड (क)
मL सदंgभत, जो उ6 त अननुपालन के समय पर (भारी था, और यह उ6 त फम 'ारा
उस फम के कारबार के संचालन के िलए िजF मेदार था, उ6 त फम और उ6 त Y
यि,, िज� ह-ने अिभिहत उपभो6 ता को (N य� या अ(N य� 9प स ेअिधिनयम क�
धारा 26 के ?कसी उपबंध का उC लंघन करने मL सहायता दी ह,ै उस ेउ6 त
उपबंध का उC लंघन करने के समान माना जाएगा और उस धारा मL िनqदU ट
जुमाने के अिधरोपण क� कारवाई क� जाएगी,; (ग) 2 यूरो 'ारा (N याियत ऊजा
लेखा परी�क, (मािणत ऊजा लेखा परी�क का (माणन या (मािणत ऊजा (बंधक का
(N यायन ऊजा द�ता 2 यूरो (यो यता, मानद� ड और शतm, िजनके अधीन एक Y
यि, को एक ऊजा लेखा परी�क के 9प मL मा� यता दी गई ह ै और उ6 त (N यायन
क� (?@या) िविनयम, 2010 के संबंिधत िविनयम- और ऊजा द�ता 2 यूरो 'ारा
ऊजा लेखा परी�क और ऊजा (बंधक, िविनयम, 2010 के अधीन रQ ?कया जाएगा,
य?द इनमL से कोई ख� ड (क) और (ख) मL संदgभत ?कसी गितिविध मL शािमल था:
पर� तु ?कसी भी ऐसे Y यि, को सुनवाई का अवसर ?दए िबना 2 यूरो 'ारा उसे
िनर: त नहt ?कया जाएगा।'' 8. मूल िनयम- मL, िनयम 11 के, उप िनयम (1)
मL, (i) जहां भी श2 द 'जारी' या 'िनगमन' आते हl, उनके : थान पर श2 द-
“जारी करना या @य करने के िलए” रखे जाएंगे, (ii) ख� ड (झख) मL
''आंचिलक रेलवे (Dै6 शन)'' से संबंिधत मद (क) क� छठी पंि, मL आने वाले
श2 द- ''डीज़ल Dै6 शन-या>ी'' के : थान पर िनF निलिखत श2 द रखे
जाएंगे, अथात् :- “डीजल Dै6 शन – सामान'' (iii) ख� ड (झख), मL 'उN
पादन कारखान- स ेसंबंिधत मद (ख) के : थान पर धारा (ख)' िनF निलिखत रखा
जाए, अथात् :- “(ख) उN पादन कारखान- के िलए : ऊजा बचत (माणप> = (ल
य वष के िलए अिधसूिचत िविशU ट ऊजा खपत – ल य वष मL (ाJ त क� गई िविशU
ट ऊजा खपत) x आधारभूत वष / 1000 मL उN प� न समतुC य यूिनट- क� संc या”
(iv) उप ख� ड (झग), के बाद िनF निलिखत उप ख� ड अंत:: थािपत ?कए
जाएंगे, अथात:्- “(“(“(“(झघझघझघझघ)))) वािणि1यक भवन� या ित�
ठावािणि1यक भवन� या ित� ठावािणि1यक भवन� या ित� ठावािणि1यक भवन� या
ित� ठान� के िलए न� के िलए न� के िलए न� के िलए ::::---- ऊजा बचत
(माणप>- क� संc या = (लि�त वष के िलए अिधसिूचत एसईसी – लि�त वष मL
अgजत एसईसी) x पाhकi ग और भ� डारण (हजार वग मीटर) के अलावा कुल िनgमत
�े>।
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 7 (झड.झड.झड.झड.)
पे#ोरसायन �े) के िलए पे#ोरसायन �े) के िलए पे#ोरसायन �े) के िलए
पे#ोरसायन �े) के िलए * - ऊजा बचत (माणप>- क� संc या = (लि�त वष के
िलए अिधसूिचत एसईसी – लि�त वष मL अgजत एसईसी) x आधार भूत वष मL ओले?फन
उN पाद- का कुल समतुC य उN पादन।'' 9. मलू िनयम- के, िनयम 12 मL, -
(क) उप िनयम (1), मL, श2 द 'जारी' के : थान पर िनF निलिखत श2 द रखे
जाएंगे, अथात् :- “जारी या @य का हकदार”; (ख) उप िनयम (6), के बाद िनF
निलिखत उप िनयम अंत:: थािपत ?कया जाएगा, अथात् :- “(6 क) अिभिहत
उपभो,ा,-
(i) िजसक� िविशU ट ऊजा खपत िनqदU ट (माप और मानक से अिधक ह,ै उसे
अिधिनयम क� धारा 14 के ख� ड (छ) और ख� ड (त) के अधीन िविनqदU ट िविहत
(माप और मानक सिुनिpत करने के िलए ऊजा बचत (माण प> खरीदने क�
पा>ता होगी; (ii) िज� ह-ने ऊजा खपत के (माप और मानक अgजत ?कए हl
sकंतु िज� हL ऊजा बचत (माण प> जारी नहt ?कए गए हl, उ� हL भी अगले
अनुपालन च@ मL अपने अनुपालन को पूरा के िलए कारोबार के स>- के
दौरान ऊजा बचत (माण प> खरीदने क� पा>ता होगी''। 10.10.10.10.
मूल िनयम- मL, िनयम 13 के, उप िनयम (1) मL श2 द- और अ�र-, ''आरंिभक
िह: से मL 'सबंंिधत च@ के कारोबार के पूरे होने स ेएक माह के अंत तक
जैसा कL �ीय िवSुत िविनयामक आयोग 'ारा िनqदU ट ?कया गया ह'ै' के : थान
पर '(9प ''क'' को जमा करने क� अंितम तारीख स ेआठ महीने' श2 द और अ�र
रखे जाएंगे, अथात्:- 11.11.11.11. मूल िनयम- क�, अनुसूची 1 मL,- (i)
पैरा 9 के उप पैरा 9.1 मL ''िमिलयन गीगा कैल/मी�Dक टन'' श2 द- के :
थान पर ये जहां भी आते हl, ''गीगा कैल/मी�Dक टन'' श2 द रखे जाएंगे।
(ii) पैरा 10 मL,- (क) उप पैरा 10.1 मL 'िमिलयन ि^�टश थमल यूिनट
(बीटीयू) (ित हजार बैरल (ित ऊजा कारक (एमबीटीयू / बीबीएल / एनआरजीएफ)'
श2 द, कोU ठक और अ�र- के : थान पर 'िमिलयन ि^�टश थमल यूिनट (बीटीयू)
(ित हजार बैरल (ित ऊजा कारक (एमएमबीटीयू / एमबीबीएल / एनआरजीएफ)' श2
द, कोU ठक और अ�र रखे जाएंगे।; (ख) उप पैरा 10.3 के : थान पर, िनF
निलिखत उप पैरा रखा जाएगा, अथात्:- “10.3 एनआरजी कारक (एनआरजीएफ) एक
�रफाइनरी क� ज�टलता के : तर का सचूक ह।ै �रफाइनरी के िलए समb ऊजा कारक
(आयाम रिहत इकाई) क� गणना (N येक इकाई मL फ�ड क� मा>ा और इसके संगत
ऊजा कारक के आधार पर क� जाती ह।ै”
-
8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) पैरा 11 मL, उप पैरा (ख) के िलए िनF निलिखत उप पैरा रखा
जाएगा, अथात:्- “(ख) उN पादन इकाइयां : - भारतीय रेल क� उN पादन
इकाइया ंिविभ� न (कार के उN पाद- का उN पादन करती हl, जैसे लोकोमो�टव,
कोच, पिहए, ए6 सल आ?द। भारतीय रेल क� उN पादन इकाइय- मL िविशU ट धन
खपत या िविशU ट ऊजा खपत को केजीओई / उN प� न समतुC य इकाई उN पाद क�
संc या के सदंभ मL िलया जाएगा। उN पादन इकाइय- के िलए एक ही ेणी के
अधीन एक से अिधक ?क: म के उN पाद- के िविनमाण हतुे, एसईसी या एसएफसी
क� गणना के िलए समतुC य यूिनट क� संc या को िवचार मL िलया जाएगा
(उदाहरण के िलए कोच क� ेणी के अधीन, एसी और नॉन एसी दोन- (कार के कोच
हो सकते हl, िजनक� ऊजा मांग िभ� न होती है, अत: इ� हL िविशU ट ऊजा खपत
के मापन के िलए समान बनाई गई यूिनट- मL प�रवgतत ?कया जाएगा।'' (iv)
पैरा 12 के बाद, िनF निलिखत पैरा को अंत:: थािपत ?कया जाएगा, अथात्:-
“13. “13. “13. “13. पे#ोरसायन पे#ोरसायन पे#ोरसायन पे#ोरसायन
�े)�े)�े)�े) ::::---- पेDोरसायन �े> मL पेDो रसायन इकाइयां शािमल
हl, िजनमL गैस @ैकर, नेथा @ैकर या दोन- शािमल हl, िजसमL केवल ओले?फन
इकाइयां शािमल हl जो एलडीपीई, एलएलडीपीई, एचडीपीई, पीपी, पीवीसी /
वीसीएम, लाइकोल आ?द जैसे उN पाद- का उN पादन करती ह,ै को संयं> क�
बाउंडरी के अंदर शािमल ?कया जाए। पेDोरसायन �े> के िलए िविशU ट ऊजा
खपत को @ैकर इकाई और माj यिमक इकाइय- मL खपत क� गई िनवल ऊजा मL मापा
जाता ह ै जहां केवल (ित कुल समतुC य ओले?फन उN पाद उN पादन मा>ा के
साथ ओले?फन उN पाद- को तैयार ?कया जाता ह।ै (i) िनवल ऊजा क� खपत कुल
ताप ऊजा और िवSुत ऊजा ह ै िजसक� खपत िनF निलिखत इकाइय- तथा उपयोिगता
से संबंिधत इकाइय- मL ?कलो कैलोरी (के.कैल) के संदभ मL 0ई ह ै: (क)
@ैकर इकाई के साथ संबंिधत इकाइयां अथात् 2 यूटािडन िनU कषण इकाई,
बLजीन िनU कषण इकाई, सी 4 हाइोजनेशन इकाई, पायरोिलिसस गैसोिलन
हाइोिजनेशन इकाई; (ख) पॉलीओले?फन यूिनस (एलएलडीपीई / एचडीपीई /
एलडीपीई / पीपी); (ग) ईओ / ईजी / लाइकोल; (घ) वीसीएम / पीवीसी; (ड़)
2यूटेन -1. %ट� प%ट� प%ट� प%ट� पण : ण : ण : ण : दोन- यूिनट- क� ऊजा
खपत, अथात् वीसीएम यूिनट और पीवीसी यूिनट मL कुल ऊजा खपत को जोड़ा जाना
चािहए। (ii) टन मL उNपा?दत ओले?फ़न उNपाद- क� समतुC य मा>ा मL अंितम
उN पा?दत उN पाद- क� कुल मा>ा क� गणना के िलए िनF निलिखत उN पाद-
को शािमल ?कया गया ह ै: (क) लाइनर कम घनNव पॉलीिथलीन (एलएलडीपीई) (ख)
लाइकोल के समतुC य एिथ लीन: 9पांतरण के िलए िनF निलिखत अिभि, का उपयोग
?कया जा सकता ह ै: ईओ के समतुC य एिथलीन = = = = समतुC य ई.ओ X
((28/44)/0.85=0.7486) िजसमL : • डीईजी का समतु� य एमईजी (डीईजी से
एमईजी) = डीईजी का उ� पादन x (62/106)
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 9
• टीईजी का समतु� य एमईजी (टीईजी से एमईजी) = टीईजी का उ� पादन x
(62/150) • िमि�त � लाइकोल का समतु� य एमईजी (िमि�त � लाइकोल से
एमईजी) = िमि�त � लाइकोल उ� पादन X (62/ िमि�त � लाइकोल का आि�वक भार)
• समतु� य एमईजी = एमईजी + [डीईजी का समतु� य एमईजी (डीईजी से एमईजी)
] + [टीईजी का समतु� य एमईजी (टीईजी से एमईजी)] • समतु� य एमईजी का
समतु� य एिथिलन ऑ" साइड (ईओ) = कुल समतु� य एमईजी मा#ा X (44/62) •
(0.85 चयनशीलता मानी गई) (ग) उ_ च घनNव पॉलीथीन (एचडीपीई) (घ) िनF न
घनNव पॉलीथीन (एलडीपीई) (ड.) िवनाइल 6लोराइड मोनोमर (वीसीएम) का समतुC
य एिथिलन / पोिलिवनाइल 6लोराइड (पीवीसी) : 9पांतरण के िलए िनF निलिखत
अिभि, का उपयोग ?कया जा सकता ह ैपीवीसी का समतुC य एिथिलन = पीवीसी का
वा: तिवक उN पादन – पीवीसी का वा: तिवक उN पादन x (35.5/62.5) वीसीएम
का समतुC य एिथिलन : - वीसीएम का वा: तिवक उN पादन –––– वीसीएम का वा:
तिवक उN पादन x (35.5/62.5) (क) पॉली(ोपाइलीन; (ख) 2यूटाडाइन; (ग)
बLजीन'' 12.12.12.12. मूल िनयम- क�, अनुसूची II मL, - (i) पैरा शीषक
''5 एसडी उवरक'', के अधीन अित�र6 त उपबंध- से संबंिधत उप पैरा का लोप
?कया जाएगा। (ii) पैरा शीषक के अधीन ''7 मL एसई 2: लोहा और इ:पात
(:पंज आयरन)'', उप पैरा 7.2 मL, ''िमनी 2 ला: ट फनrस J लांट'' से
संबंिधत मद ग मL, उप मद 3 के बाद, िनF निलिखत मद- को अंत:: थािपत ?कया
जाएगा, अथात्: - “4. “4. “4. “4. "पंज आयरन (एसआई)"पंज आयरन
(एसआई)"पंज आयरन (एसआई)"पंज आयरन (एसआई) केकेकेके समतु8 यसमतु8 यसमतु8
यसमतु8 य मखु उ,पाद :मखु उ,पाद :मखु उ,पाद :मखु उ,पाद : बीवाय मL
9पांतरण कारक (सीएफबीवाय) = बीवाय मL एसआई क� एसईसी (?क. कैलोरी / टन)
/ बीवाय मL (मुख उN पाद क� एसईसी (?क. कैलोरी / टन); एवाय मL 9पांतरण
कारक (सीएफएवाय) = एवाय मL एसआई क� एसईसी (?क. कैलोरी / टन) / बीवाय
मL (मुख उN पाद क� एसईसी (?क. कैलोरी / टन); (i) बीवाय मL एसआई से
समतुC य (मुख उNपाद (टन) = सीएफ X बीवाय मL एसआई का उNपादन (टन) (ii)
य:द बीवाय म< एसआई का उ, पाय:द बीवाय म< एसआई का उ, पाय:द बीवाय
म< एसआई का उ, पाय:द बीवाय म< एसआई का उ, पादन दन दन दन =0; =0;
=0; =0; तो तो तो तो
-
10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) एवाई (टन) मL (मुख उNपाद के िलए एसआई = सीएफएवाई X एवाई मL
एसआई का उNपादन (टन) य:द य:द य:द य:द बीवाबीवाबीवाबीवाईईईई म
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 11 आकलन वष� के
िलएआकलन वष� के िलएआकलन वष� के िलएआकलन वष� के िलए जहां, - बीवाय =
आधारभूत वष' एवाय = आकलन वष' एसआई = )पंज आयरन एफईसीएच = फेरो -ोम
एसएमएस = )टील मै/�टंग शॉप (टन) पीआई = िपग आयरन (टन) आरएम = रो/लंग
िमल (टन) एचएम = हॉट मेटल (टन) ईएमपी = समतु� य 1मुख उ�पाद।'' [फा.सं.
10/03/2018-EC] राज पाल, आgथक सलाहकार %ट� प%ट� प%ट� प%ट� पण : ण : ण
: ण : मूल िनयम भारत के राजप>, असाधारण, भाग II, ख� ड 3, उप-ख� ड
(i)i)i)i) मL अिधसूचना सं. सा.का.िन. 269 ((((अ.),,,, तारीख 30 माच,
2012 'ारा (कािशत ?कए गए थे और भारत के राजप>, असाधारण, भाग II, ख�
ड 3, उप-ख� ड (i),i),i),i), तारीख 31 माच, 2016 मL (कािशत अिधसूचना
सं. सा.का.िन 373 ((((अ.),,,, तारीख 31 माच, 2016 'ारा सशंोिधत ?कया
गया था ।
MINISTRY OF POWER
NOTIFICATION
New Delhi, the 26th April, 2018
G.S.R. 409 (E).—In exercise of the powers conferred by clauses
(f), (g), (k), (la) and (laa) of sub-section (2) of
section 56, read with clauses (g) and (o) of section 14,
sub-section (1) and sub-section (2) of section 14A and section
14B
of the Energy Conservation Act, 2001 (52 of 2001), the Central
Government, in consultation with the Bureau, hereby
makes the following rules further to amend the Energy
Conservation (Energy Consumption Norms and Standards for
Designated Consumers, Form, Time within which, and Manner of
Preparation and Implementation of Scheme, Procedure
for Issue of Energy Savings Certificate and Value of Per Metric
Ton of Oil Equivalent of Energy Consumed) Rule, 2012,
namely:-
1. Short title and commencement. - (1) These rules may be called
the Energy Conservation(Energy Consumption
Norms and Standards for Designated Consumers, Form, Time within
which, and Manner of Preparation and
Implementation of Scheme, Procedure for Issue of Energy Savings
Certificate and Value of Per Metric Tonne of Oil
Equivalent of Energy Consumed) Amendment Rules, 2018.
(2) They shall come into force on the date of their publication
in the Official Gazette.
एवाय के िलए कुल समतुC य (मुख उN पाद (गम धातु/ िपग आयरन) (टन) =
एवाय के िलए एसआई से ईएमपी + एफईसीएच से ईएमपी + एसएमएस से ईएमपी +
एवाय के िलए आरएम से ईएमपी + एचएम स ेईएमपी
-
12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2. In the Energy Conservation (Energy Consumption Norms and
Standards for Designated Consumers, Form,
Time within which, and Manner of Preparation and Implementation
of Scheme, Procedure for Issue of Energy Savings
Certificate and Value of Per Metric Ton of Oil Equivalent of
Energy Consumed) Rules, 2012 (hereinafter referred to as
the principal rules),in the preamble in sub-rule (1) of rule 1,
for the words, “Procedure for issue of Energy Saving
Certificate”, the words “Procedure for issue or purchase of
Energy Saving Certificate” shall be substituted.
3. In the principal rules, in rule 2, in sub-rule (1),-
(A) For the existing clause (l), the following shall be
substituted, namely: -
‘(l) “specific energy consumption (SEC)”, for energy intensive
industries and other establishments, -
(i) for industries: Specific energy consumption means ratio of
the net energy input into the boundary of
designated consumers of Aluminium, Cement, Chlor-Alkali,
Fertilizer, Iron and Steel, Pulp and Paper
and Textile industries, to the total output of equivalent major
product produced in the respective
designated consumers’ boundary, calculated as per the following
formula, namely:-
and expressed in terms of the metric tonne of oil equivalent
(toe)/per unit of equivalent product;
(ii) for thermal power stations: Specific energy consumption or
Net Heat Rate in relation to thermal power
stations or Plants means the ratio of net energy input in to the
designated consumers’ boundary in terms of kilo
calorie (kcal) to the net generation in terms of kilo Watt hour
(kWh) on bus bar taking in to account the effect of
the auxiliary power consumption (APC) and expressed in terms of
kcal per kWh, calculated as per the following
formula, namely: -
Where:
- Gross Heat Rate is the ratio of net energy input in kcal to
gross generation in kWh;
- Auxiliary power consumption (APC) of thermal power
stations/plant excluding energy
consumption in percentage of colony;
(iii) for petroleum refineries sector: Specific energy
consumption for petroleum refinery sector shall be
measured in MBN which means net energy and loss of the plant
calculated in Million British Thermal Unit
(MMBTU) per one thousand barrels (Mbbls) per Energy factor
(NRGF) and expressed by the following
formula, namely:-
MBN = MMBTU / Mbbls / NRGF
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 13
Where:
MMBTU: Net Energy and loss of the petroleum refinery unit
calculated in MMBTU (Million
British Thermal Units)
Mbbls : Crude processed in thousand barrels
NRGF : The NRG factor (NRGF) is the indicator of the level of
complexity of a refinery and overall
energy factor (dimensionless unit) calculated for the refinery
based on the volume of feed
in each unit and its corresponding energy factor;
(iv) for railways sector:
(a) zonal railways: Specific energy consumption for zonal
railways in passenger services and
goods services are expressed as below:
(1) for diesel traction: Specific energy consumption is the
ratio of diesel consumption in litre per
thousand of gross tonne kilometrage and shall be expressed as
following:
“Litre/1000GTKm”
(2) for electrical traction: Specific energy consumption is the
ratio of electrical energy
consumption in kWh per thousand of gross tonne kilometrage and
shall be expressed as
following:
“kWh/1000GTKm”
(b) production units: Specific energy consumption is the ratio
of kilo gram of oil equivalent
(KgOE) to the number of equivalent units produced and shall be
taken in terms of KgOE /number
of equivalent units produced and shall be expressed in the
following formula, namely: -
(v) for DISCOM sector: Transmission and distribution loss in
percentage shall be used to assess energy
performance of electricity distribution companies and calculated
as per the following formula, namely:-
Transmission and distribution loss (%) = {1-(Total energy
billed/Net input energy)*100}
Where:
- Total energy billed (Million kWh) is the Net energy billed
(adjusted for energy traded);
- Net input energy (Million kWh) is the energy received at
distribution periphery after adjusting the
transmission losses and energy traded.
-
14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(vi) for commercial building or establishments: Specific energy
consumption for building means the annual
energy consumption expressed in terms of tonne of oil equivalent
per thousand square meter of the area wherein
energy is used and includes the location of buildings and shall
be expressed by the following formula, namely:-
and expressed in terms of toe / thousand square meter.
Where:
-storage is defined as storage of waste items.
(vii) for petrochemical sector: Specific energy consumption is
measured in net energy consumed in cracker unit and
secondary units producing olefin products only per total
equivalent production of olefin products and expressed in terms
of the metric tonne of oil equivalent (toe)per unit of
equivalent product;
(B) after clause (e), the following clause shall be inserted,
namely: -
‘(ea) “eligible entity” means any designated consumer registered
with registry who has been issued,
deemed to have been issued, entitled to purchase and such
designated consumers who have just met their
energy consumption norms and standards and desire to trade in
energy saving certificates (ESCerts) for
compliance with the energy consumption norms and standards
specified under clauses (g) and (p) of section
14 of the Act.’;
(C) after clause (g), the following clause shall be inserted,
namely: -
‘(ga) “Registry” means the agency designated by the Central
Government under Central Electricity
Regulatory Commission (Terms and Conditions for Dealing in
Energy Saving Certificates) Regulations,
2016, for the purpose of participating in the sell and purchase
of ESCerts on Power exchanges and to
perform such other functions as assigned to it under the said
regulation.’.
4. In the principal rules, in rule 4, in sub-rule (1), -
(a) in clause (c),for the words “which affects energy
consumption”, the words “which affects specific energy
consumption” shall be substituted;
(b) in clause (g), for item (i), the following item shall be
substituted, namely: -
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 15
“(i) Force majeure;”.
5. In the principal rules, in rule 6, in sub-rule (4), for the
clause (e), the following clause shall be substituted,
namely: -
“(e) also take into consideration,
(iii) for ensuring compliance with the energy consumption norms
and standards, the sector specific
guidelines specified in the Schedule I and Schedule II to these
rules;
(iv) the procedure for assessment which shall include but not
limited to the following,-”
(A) Document review, involving-
(i) review of data and its source, and information to verify the
correctness, credibility
and interpretation of presented information;
(ii) cross checks between information provided in the audit
report and, if comparable
information is available from sources other than those used in
the audit report, the
information from those other sources and independent background
investigation;
(B) follow up action, involving-
(i) site visits, interviews with personal responsible in the
designated consumers’ plant;
(ii) cross-check of information provided by interviewed
personnel to ensure that no
relevant information has been omitted or, over or under
valued;
(iii) review of the application of formulae and calculations,
and reporting of the findings
in the verification report.”.
6. In the principal rules, in rule 8, in sub-rule (10),for
clause (b), the following clause shall be substituted, namely:
-
“(b) the amount of metric tonne of oil equivalent of energy on
account of unfair gain identified due to
check-verification and the price of the said amount of energy
shall be calculated as per rule 16 based on the
assessment year of the respective cycle.”
7. In the principal rules, in rule 9, -
(A) in sub-rule (1), after clause (b), following clause shall be
inserted, namely:-
“(ba) has at least one sector expert with experience of more
than ten years in the said sector applied for,
if Accredited Energy Auditor has the required experience in a
specific sector, the same shall be treated
as sector specific experience;”
(bb) The Empanelment of the AEA firm shall be sector specific
based on the experience of sector
experts engaged by the firm.”
-
16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(B) for sub-rule (4), the following sub-rule shall be
substituted, namely: -
“(4) The applications so received shall be scrutinised in
accordance with the provisions of sub-rule(1)
and interaction shall be held covering the duties,
responsibilities and obligations specified in rule 10
having regard to their associates and sector experts, and a
panel of eligible applicants shall be prepared
which shall be displayed on the website of the Bureau.”;
(C) in sub-rule (5), at the end, the following words shall be
added, namely: -
“and shall be renewed after every five years based on the extant
provisions in force.”;
(D) after sub-rule (6), the following sub-rules shall be
inserted, namely: -
“(7)(a) The Bureau shall cancel the empanelment of the firm
referred to in sub-rule (5), if it fails to
comply with any of the provisions specified in the Act or in
these rules during the course of performing
the function of verification or check verification, and if such
non-compliance is concomitant with -
(i) any commission or omission amounting to professional
misconducts; or
(ii) any misrepresentation of fact or data or reports on energy
consumption; or
(iii) any act amounting to fraud; or
(iv) the empaneled firm fails to maintain its empaneled team in
case in any of the team members has
left the said firm and the resultant vacancy has not been filled
within a period of three months
from the date of the said vacancy:
Provided that no such cancellation shall be done by the Bureau
without giving an opportunity of
being heard to such firm.
(b) Every such person borne on the strength of the firm,
referred to in clause (a), who at the time of
such non-compliance was in charge of, and was responsible to the
said firm for the conduct of
the business of that firm, the said firm as well as the said
person who directly or indirectly
helped the designated consumer in contravention of any of the
provision of section 26 of the Act
shall be deemed to have acted in contravention of the said
provision and shall be liable to
proceeded against for imposition of penalty specified in that
section.
(c) The Bureau shall cancel the accreditation of Accredited
energy auditor, certification of certified
energy auditor or certified energy manager under the respective
regulations, namely the Bureau
of Energy Efficiency (Qualifications for Accredited Energy
Auditors and Maintenance of their
List) Regulations, 2010 and the Bureau of Energy Efficiency
(Certification Procedures for
Energy Managers) Regulations, 2010 if any of them was involved
in any of the activities
referred to clauses (a) and (b):
Provided that no such cancellation shall be done by the Bureau
without giving an opportunity of
being heard to such persons.”.
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 17
8. In the principal rules, in rule 11, in sub-rule (1), -
(i) for the words “issue” or “issuance”, wherever they occur,
the following words shall be substituted, namely: -
“issue or to purchase”;
(ii) in clause (ib), in item (A) relating to “Zonal Railways
(Traction)”, for the words “diesel traction- passenger” appearing
in line six, the following words shall be substituted, namely:
-
“diesel traction-goods”;
(iii) in clause (ib), for item (B) relating to “Production
factories”, the following shall be substituted,
namely: -
“(B) for Production factories:
(iv) after sub-clause (ic), the following sub-clauses shall be
inserted, namely:-
“(id) for Commercial Buildings or establishments:
Number of energy savings certificates =
{Specific energy consumption notified for the target year
–Specific energy consumption
achieved in the target year} X total built up area excluding
parking and storage (thousand-
meter square) in the baseline year.
(ie) for petrochemical sector:
Number of energy savings certificates =
{Specific energy consumption notified for the target year –
Specific energy consumption
achieved in the target year} X total equivalent production of
olefin products in the baseline
year.”.
9. In the principal rules, in rule 12, -
(a) in sub-rule (1), for the word “issue”, the following words
shall be substituted, namely: -
“issue or entitled to purchase”;
-
18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) after sub-rule (6), the following sub-rule shall be
inserted, namely: -
“(6a) The designated consumer,-
(i) whose specific energy consumption is more than the
prescribed norm and standards shall
be eligible to purchase the energy saving certificates to ensure
compliance with the
prescribed norms and standard specified under clause (g) and
clause (p) of the section 14
of the Act;
(ii) who have achieved the energy consumption norms and
standards but has not been issued
energy saving certificates shall also be eligible to purchase
energy saving certificates
during the trading sessions for meeting their compliance of next
compliance cycle.”.
10. In the principal rules, in rule 13, in sub-rule (1), in the
opening portion, for the words and letter “by the end
of one month from the completion of trading of the respective
cycle as may be specified by the Central
Electricity Regulatory Commission”, the words and letter ‘eight
months from the last date of submission of
Form “A”’ shall be substituted.
11. In the principal rules, in Schedule I,-
(i) in paragraph 9, in sub-paragraph 9.1, for the words “Million
Gcal/MT”, wherever they occur,
the words “Gcal/MT” shall be substituted;
(ii) in paragraph 10,-
a) in sub-paragraph 10.1, for the words, brackets and letters
“Million British Thermal Units
(BTU) per thousand barrel per Energy Factor per NRGF
(MBTU/Mbbls/NRGF)”, the
words, brackets and letters “Million British Thermal Units (BTU)
per one thousand
barrel per Energy Factor (MMBTU/Mbbls/NRGF)” shall be
substituted;
b) for sub-paragraph 10.3, the following sub-paragraph shall be
substituted, namely: -
“10.3 The NRG factor (NRGF) is the indicator of the level of
complexity of a refinery and
overall energy factor (dimensionless unit) shall be calculated
for the refinery based on the
volume of feed in each unit and its corresponding energy
factor.”;
(iii) in paragraph 11, for sub-paragraph (b), the following
sub-paragraph shall be substituted,
namely: -
“(b) Production Units: - Production units of Indian Railways
manufacture variety of products like
Locomotives, coaches, wheels, axles etc. Specific Fuel
Consumption or Specific Energy
Consumption of production units of Indian Railways shall be
taken in terms of KgOE / number of
equivalent unit product produced. For production units
manufacturing more than one variety of
product under same category, equivalent number of units will be
taken to calculate specific energy
consumption or specific fuel consumption (for example under
category of coach there may be both
AC and Non-AC coaches having different energy demand hence they
will be converted into
equalised units to measure specific energy consumption).”;
(iv) after paragraph 12, the following paragraph shall be
inserted, namely:-
“13. Petrochemical sector: -
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 19
Petrochemical sector include petrochemical units having gas
crackers, Naphtha crackers or
both which include only olefin units producing products like
LDPE, LLDPE, HDPE, PP,
PVC/VCM, Glycols, etc. inside the plant boundary.
Specific energy consumption for petrochemical sector is measured
in net energy consumed in
cracker unit and secondary units producing olefin products only
per total equivalent olefin
product production quantity.
(i) Net energy consumed is the total thermal energy and
electrical energy consumed in
terms of kilo calorie (kcal) in following units and related
utility units:
(a) Cracker unit along with associated units i.e. Butadiene
extraction unit, Benzene
extraction unit, C4 Hydrogenation unit, Pyrolysis Gasoline
Hydrogenation unit;
(b) Polyolefin units (LLDPE/HDPE/LDPE/PP);
(c) EO/EG/Glycols;
(d) VCM/PVC;
(e) Butene-1;
Note: Energy consumption of both units i.e. VCM unit and PVC
unit to be added in
total energy consumption.
(ii) Equivalent quantity of olefin products produced in tonne
includes following products
for calculating the total quantity of final products
produced:
(a) liner low density Polyethylene (LLDPE)
(b) equivalent ethylene of Glycols, following expression may be
used for conversion
Equivalent Ethylene of Ethylene Oxide = Eq. E.O X
((28/44)/0.85=0.7486)
Where:
• Eq. MEG of DEG (DEG to MEG)= DEG production x (62/106)
• Eq. MEG of TEG (TEG to MEG)= TEG production x (62/150)
• Eq.MEG of Mixed Glycol (Mixed Glycol to MEG) = Mixed Glycol
Production X (62/
Molecular weight of Mixed Glycol)
• Eq MEG= MEG + [Eq. MEG of DEG (DEG to MEG )]+ [Eq. MEG of TEG
(TEG to MEG)]
• Eq Ethylene Oxide (EO) = Sale Quantity of E.O + [Tot. Eq. MEG
quantity X (44/62])
• (0.85 selectivity considered)
(c) high density polyethylene (HDPE)
(d) low density polyethylene (LDPE)
(e) equivalent ethylene of Vinyl Chloride Monomer
(VCM)/Polyvinyl Chloride (PVC),
following expression may be used for conversion:
Eq. Ethylene of PVC= [Actual production of PVC - actual
production of PVC] X (35.5/62.5);
Eq. Ethylene of VCM = [Actual production of VCM – Actual
production of VCM] X
(35.5/62.5);
(f) Polypropylene;
-
20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(g) Butadiene;
(h) Benzene.” .
12. In Principal rules, in Schedule II,-
(i) under the paragraph heading “5. Sd Fertilizer”, the
sub-paragraph 5.6 relating to additional
provisions shall be omitted;
(ii) under the paragraph heading “7. Se2: Iron and Steel (Sponge
Iron)”, in sub-paragraph 7.2, in
item C relating to “Mini Blast Furnace plant”, after sub-item 3,
the following sub-items shall
be inserted, namely: -
“4. Sponge Iron (SI) to Equivalent Major Product:
Conversion Factor in BY (CFBY) = SEC of SI in BY (kcal/tonne)
/SEC of Major Product in BY
(kcal/tonne);
Conversion Factor in AY (CFAY) = SEC of SI in AY (kcal/tonne)
/SEC of Major Product in BY
(kcal/tonne);
(iii) SI to Equivalent Major Product in BY(Tonnes) = CF X
Production of SI in
BY(Tonnes)
If SI Production in BY =0; then
(ii) SI to Major Product in AY (Tonnes)= CFAY X Production of SI
in AY (Tonnes)
If SI Production in BY≠0, then
(iii) SI to Major Product in AY (Tonnes) = CFBY X Production of
SI in AY (Tonnes)
Where:
CFBY = Conversion Factor in Baseline Year
CFAY = Conversion Factor in Assessment Year
SEC = Specific Energy Consumption (kcal/Tonne)
SI = Sponge Iron;
5. Ferro Chrome to Equivalent Major Product:
Conversion Factor in BY (CFBY) = SEC of FeCh in BY (kcal/tonne)
/SEC of Major Product in BY
(kcal/tonne);
Conversion Factor in AY (CFAY) = SEC of FeCh in AY (kcal/tonne)
/SEC of Major Product in BY
(kcal/tonne);
(i) FeCh to Equivalent Major Product in BY(Tonnes) = CF X
Production of FeCh in BY(Tonnes)
If FeCh Production in BY =0; then
(ii) FeCh to Major Product in AY (Tonnes)= CFAY X Production of
FeCh in AY (Tonnes)
If SMS Production in BY≠0, then
(iii) FeCh to Major Product in AY (Tonnes) = CFBY X Production
of FeCh in AY (Tonnes)
-
¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 21
Where:
CFBY = Conversion Factor in Baseline Year
CFAY = Conversion Factor in Assessment Year
SEC = Specific Energy Consumption (kcal/Tonne)
FeCh = Ferro Chrome (Tonne)
Total Equivalent Product (Hot Metal/Pig Iron) for BY and AY
For Baseline Year
For Assessment Year
Where:
BY= Baseline Year
AY=Assessment Year
SI = Sponge Iron
FeCh = Ferro Chrome
SMS = Steel Melting Shop (Tonne)
PI = Pig Iron (Tonne)
RM = Rolling Mill (Tonne)
HM = Hot Metal (Tonne)
EMP = Equivalent Major Product.”.
[F. No. 10/03/2018-EC]
RAJ PAL, Economic Advisor
Note : The principal rules were published in the Gazette of
India, Extraordinary, Part II, Section 3, Sub-section (i) vide
notification number G.S.R. 269 (E), dated the 30th March, 2012
and were last amended vide notification G.S.R.
373(E), dated the 31st March, 2016 published in the Gazette of
India, Extraordinary, Part II, Section 3, Sub-
section (i), dated the 31stMarch, 2016.
.
Uploaded by Dte. of Printing at Government of India Press, Ring
Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications,
Delhi-110054.
Total Equivalent Major Product (Hot Metal/Pig Iron) for BY
(Tonnes)=SI to EMP + FeCh to EMP + SMS to Total Equivalent Major
Product (Hot Metal/Pig Iron) for BY (Tonnes)=SI to EMP + FeCh to
EMP + SMS to Total Equivalent Major Product (Hot Metal/Pig Iron)
for BY (Tonnes)=SI to EMP + FeCh to EMP + SMS to Total Equivalent
Major Product (Hot Metal/Pig Iron) for BY (Tonnes)=SI to EMP + FeCh
to EMP + SMS to
EMP for BY + RM to EMP for BY+HM to EMP for BYEMP for BY + RM to
EMP for BY+HM to EMP for BYEMP for BY + RM to EMP for BY+HM to EMP
for BYEMP for BY + RM to EMP for BY+HM to EMP for BY
Total Equivalent Major Product (Hot Metal/Pig Iron) for Total
Equivalent Major Product (Hot Metal/Pig Iron) for Total Equivalent
Major Product (Hot Metal/Pig Iron) for Total Equivalent Major
Product (Hot Metal/Pig Iron) for AY (Tonnes)AY (Tonnes)AY
(Tonnes)AY (Tonnes)
= SI to EMP + FeCh to EMP +SMS to EMP for AY + RM to EMP for AY+
HM to EMP for AY= SI to EMP + FeCh to EMP +SMS to EMP for AY + RM
to EMP for AY+ HM to EMP for AY= SI to EMP + FeCh to EMP +SMS to
EMP for AY + RM to EMP for AY+ HM to EMP for AY= SI to EMP + FeCh
to EMP +SMS to EMP for AY + RM to EMP for AY+ HM to EMP for AY
2018-05-03T15:19:01+0530ALOK KUMAR