Jet ™ Tooth Shade Acrylic Resin Product Identification Fast curing temporary crown and bridge acrylic resin Package Contents REF 1410 Net Wt. 45g REF 1420 Net Wt. 100g REF 1430 Net Wt. 454g REF 1450 Net Wt. 2.3kg REF 1470 Net Wt. 11.3kg REF 1480 Net Wt. 45.4kg REF 1402 Net Vol. 30ml REF 1402X6 Net Vol. 6x30ml REF 1403 Net Vol. 118ml REF 1404 Net Vol. 236ml REF 1405 Net Vol. 473ml REF 1406 Net Vol. 946ml REF 1407 Net Vol. 3.8L REF 1408 Net Vol. 19L REF 1407D Net Vol. 55 gallon REF 1409 Net Vol. 202.69L REF 1484 Net Wt. 4x45g; Net Vol. 118ml; glass dropper REF 1493 Net Wt. 6x45g; Net Vol. 118 ml; glass dropper Intended Purpose This product is intended for the fabrication of temporary crowns and bridges. Storage Conditions / Instructions Close container tightly after use. Store in original container in a cool, dry, well-ventilated location, away from sources of ignition and light.
Jet Tooth Shade Instructions
May 19, 2015
Fast curing temporay crown and brigde acrylic resin.
For your orders:
Contact Lang Dental Manufacturing Co., Inc.
Address: 175 Messner Drive
Wheeling, IL 60090
Phone: (800) 222-5264/(847) 215-6622
Fax: (847) 215-6678/(866) 278-8510
Site: http://www.langdental.com/
For your orders:
Contact Lang Dental Manufacturing Co., Inc.
Address: 175 Messner Drive
Wheeling, IL 60090
Phone: (800) 222-5264/(847) 215-6622
Fax: (847) 215-6678/(866) 278-8510
Site: http://www.langdental.com/
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Jet™ Tooth Shade Acrylic ResinProduct IdentificationFast curing temporary crown and bridge acrylic resin
Package ContentsREF 1410 Net Wt. 45gREF 1420 Net Wt. 100gREF 1430 Net Wt. 454gREF 1450 Net Wt. 2.3kgREF 1470 Net Wt. 11.3kgREF 1480 Net Wt. 45.4kgREF 1402 Net Vol. 30mlREF 1402X6 Net Vol. 6x30mlREF 1403 Net Vol. 118mlREF 1404 Net Vol. 236mlREF 1405 Net Vol. 473mlREF 1406 Net Vol. 946mlREF 1407 Net Vol. 3.8LREF 1408 Net Vol. 19LREF 1407D Net Vol. 55 gallonREF 1409 Net Vol. 202.69LREF 1484 Net Wt. 4x45g; Net Vol. 118ml; glass dropperREF 1493 Net Wt. 6x45g; Net Vol. 118 ml; glass dropper
Intended PurposeThis product is intended for the fabrication of temporary crowns and bridges.
Storage Conditions / InstructionsClose container tightly after use. Store in original container in a cool, dry, well-ventilated location, away from sources of ignition and light.
MediMark® Europe SarlBP 233238033 Grenoble Cedex 2 France
Lang Dental Mfg. Co., Inc. Wheeling, IL 60090-0969 USAwww.LangDental.com
Made in USAPh 847-215-6622Fax 847-215-6678
© 2012 Lang Dental Mfg. Co., Inc. LANG and AQUAPRES are the registered trade-marks of Lang Dental Mfg. Co., Inc. JET is the trademark of Lang Dental Mfg. Co., Inc. All rights reserved.
LDD 14 R. 9
0120
LDD 14 Jet Tooth Shade r9.indd 1 11/21/12 3:37 PM
Operating / Handling InstructionsLiquid may cause skin irritation. Avoid contact with skin, eyes and clothing. Wear protective gloves, safety glasses with side shields or chemical splash goggles. Avoid prolonged breathing of vapors. Use with adequate ventilation. Do not smoke in the presence of open containers. See Safety Data Sheet for complete information. SDS is available at www.langdental.com or by contacting manufacturer.
Warning: flammable liquid. Contains: Methyl Methacrylate Monomer, stabilized. Flash Point: 52.7°F (11.5°C), NFPA, NPCA-HMIS #: H-2, F-3, R-2.
ContraindicationsJet Tooth Shade acrylic is contraindicated for persons with allergies to methyl methacrylate monomer.
Other Materials / Equipment Needed1. Silicone lubricant2. Acrylic bur or stone3. Aquapres® (pressure curing unit), optional4. Jet™ Adjusters (acrylic stains), optional5. Jet™ Seal (acrylic sealant), optional
Instructions for UseFor consistent results always shake Jet liquid before use, as catalyst may have separated from monomer.1. Take a full mouth impression and preserve in a wet
towel.2. Complete necessary preparations of the tooth.3. Rinse impression with water and dry the surface with
compressed air.4. Select tooth shade to match patient’s natural teeth.
Instructions for Use (Continued)5. In the impression, fill the tooth or teeth that were
extracted or prepared with Jet Tooth Shade as follows. Moisten surface with Jet liquid. Spray on Jet Tooth Shade powder from dispenser bottle. Alternate liquid and powder until impression is filled. For best results, begin and end with liquid.
6. While allowing acrylic to reach a paste like consistency, coat the prepared teeth and surrounding tissue with silicone lubricant to allow easy removal of acrylic from prep and to protect the teeth and surrounding tissue.
7. Seat impression in mouth and hold in place for 3 min-utes. Remove and trim excess acrylic. Do not over trim.
8. Reseat impression in mouth and place in and out of pa-tient’s mouth until material reaches a rubbery state and cannot be distorted. CAUTION! Do not allow material to get hot in mouth!
9. Remove impression from patient’s mouth. Allow an additional 10 minutes for curing, either on bench, or for better results, in Aquapres at 30 psi.
10. Remove temporary from impression and check for fit.11. Trim excess material with an acrylic bur or stone.
Grind to a smooth finish.12. Modify shade with Jet Adjusters if desired. Polish using
Jet Seal.13. Clean patient’s teeth of any residual silicone lube. Place
temporary into mouth and secure with suitable tempo-rary cement.
DisposalDispose of unused material in accordance with local, state, and national legislation.
WarrantyManufacturer warrants this product to be free from manufacturing defects for one year from date of purchase. Warranty is void if product is not used for intended purpose, not used as instructed or not stored in original container.
Xn - Harmful
F - Highly Flammable
LDD 14 Jet Tooth Shade r9.indd 2 11/21/12 3:37 PM
Operating / Handling InstructionsLiquid may cause skin irritation. Avoid contact with skin, eyes and clothing. Wear protective gloves, safety glasses with side shields or chemical splash goggles. Avoid prolonged breathing of vapors. Use with adequate ventilation. Do not smoke in the presence of open containers. See Safety Data Sheet for complete information. SDS is available at www.langdental.com or by contacting manufacturer.
Warning: flammable liquid. Contains: Methyl Methacrylate Monomer, stabilized. Flash Point: 52.7°F (11.5°C), NFPA, NPCA-HMIS #: H-2, F-3, R-2.
ContraindicationsJet Tooth Shade acrylic is contraindicated for persons with allergies to methyl methacrylate monomer.
Other Materials / Equipment Needed1. Silicone lubricant2. Acrylic bur or stone3. Aquapres® (pressure curing unit), optional4. Jet™ Adjusters (acrylic stains), optional5. Jet™ Seal (acrylic sealant), optional
Instructions for UseFor consistent results always shake Jet liquid before use, as catalyst may have separated from monomer.1. Take a full mouth impression and preserve in a wet
towel.2. Complete necessary preparations of the tooth.3. Rinse impression with water and dry the surface with
compressed air.4. Select tooth shade to match patient’s natural teeth.
Instructions for Use (Continued)5. In the impression, fill the tooth or teeth that were
extracted or prepared with Jet Tooth Shade as follows. Moisten surface with Jet liquid. Spray on Jet Tooth Shade powder from dispenser bottle. Alternate liquid and powder until impression is filled. For best results, begin and end with liquid.
6. While allowing acrylic to reach a paste like consistency, coat the prepared teeth and surrounding tissue with silicone lubricant to allow easy removal of acrylic from prep and to protect the teeth and surrounding tissue.
7. Seat impression in mouth and hold in place for 3 min-utes. Remove and trim excess acrylic. Do not over trim.
8. Reseat impression in mouth and place in and out of pa-tient’s mouth until material reaches a rubbery state and cannot be distorted. CAUTION! Do not allow material to get hot in mouth!
9. Remove impression from patient’s mouth. Allow an additional 10 minutes for curing, either on bench, or for better results, in Aquapres at 30 psi.
10. Remove temporary from impression and check for fit.11. Trim excess material with an acrylic bur or stone.
Grind to a smooth finish.12. Modify shade with Jet Adjusters if desired. Polish using
Jet Seal.13. Clean patient’s teeth of any residual silicone lube. Place
temporary into mouth and secure with suitable tempo-rary cement.
DisposalDispose of unused material in accordance with local, state, and national legislation.
WarrantyManufacturer warrants this product to be free from manufacturing defects for one year from date of purchase. Warranty is void if product is not used for intended purpose, not used as instructed or not stored in original container.
Xn - Harmful
F - Highly Flammable
LDD 14 Jet Tooth Shade r9.indd 2 11/21/12 3:37 PM
Jet™ Tooth Shade Acrylic ResinProduct IdentificationFast curing temporary crown and bridge acrylic resin
Package ContentsREF 1410 Net Wt. 45gREF 1420 Net Wt. 100gREF 1430 Net Wt. 454gREF 1450 Net Wt. 2.3kgREF 1470 Net Wt. 11.3kgREF 1480 Net Wt. 45.4kgREF 1402 Net Vol. 30mlREF 1402X6 Net Vol. 6x30mlREF 1403 Net Vol. 118mlREF 1404 Net Vol. 236mlREF 1405 Net Vol. 473mlREF 1406 Net Vol. 946mlREF 1407 Net Vol. 3.8LREF 1408 Net Vol. 19LREF 1407D Net Vol. 55 gallonREF 1409 Net Vol. 202.69LREF 1484 Net Wt. 4x45g; Net Vol. 118ml; glass dropperREF 1493 Net Wt. 6x45g; Net Vol. 118 ml; glass dropper
Intended PurposeThis product is intended for the fabrication of temporary crowns and bridges.
Storage Conditions / InstructionsClose container tightly after use. Store in original container in a cool, dry, well-ventilated location, away from sources of ignition and light.
MediMark® Europe SarlBP 233238033 Grenoble Cedex 2 France
Lang Dental Mfg. Co., Inc. Wheeling, IL 60090-0969 USAwww.LangDental.com
Made in USAPh 847-215-6622Fax 847-215-6678
© 2012 Lang Dental Mfg. Co., Inc. LANG and AQUAPRES are the registered trade-marks of Lang Dental Mfg. Co., Inc. JET is the trademark of Lang Dental Mfg. Co., Inc. All rights reserved.
LDD 14 R. 9
0120
LDD 14 Jet Tooth Shade r9.indd 1 11/21/12 3:37 PM
Related Documents
