Jeff Peters sent us the following pictures on how he mounted the planer digital on his older DeWalt 734. Instead of calibrating the digital per instructions, he took a different approach. After installing the digital on his planer, he planed a board, measured its thickness with a ruler then moved the DRO until the reading matched his ruler measurement. He then planed another board to the same thickness using the DRO to verify the install.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Jeff Peters sent us the following pictures on how he mounted the planer digital on his older DeWalt 734.
Instead of calibrating the digital per instructions, he took a different approach. After installing the digital on his planer, he planed a board, measured its thickness with a ruler then moved the DRO until the reading matched his ruler measurement. He then planed another board to the same thickness using the DRO to verify the install.
Related Documents
![Lux, Jeff J [mailto:jlux@envpm.com] Sent: To: Cc: Subject](https://static.cupdf.com/doc/110x72/621a17cc27f74307274d9855/lux-jeff-j-mailtojluxenvpmcom-sent-to-cc-subject.jpg)
