JCM Model Project Host Country: Indonesia Sector: 3. Energy demand Energy Saving for Air-conditioning at Textile Factory PP from Japan: Ebara Refrigeration Equipment & Systems PP from Indonesia: PT. Agro Pantes Tbk. and PT. Ebara Indonesia 1. Outline of GHG Mitigation Activity In Indonesia, humidity control is indispensable for the textile industry to maintain product quality and massive energy output, which is required for the adjustment of factory air conditioning. The target factory will replace old-fashioned chillers (230USRt and 250USRt) with high-efficiency chillers (500USRt), in order to save energy and mitigate CO 2 emissions. High-efficiency chillers adopt a high-performance economizer cycle, and a super-cooling refrigerant cycle, in order to save energy. Also, the chillers use low-pressure refrigerant (HFC-245fa) to avoid damage to the ozone layer. PT. Argo Pantes Tbk.’s factories near Jakarta: (1) Tangerang Factory (2) Bekasi Factory 2. Expected GHG Reductions A chiller was installed and a test run was successfully carried out in February 2014. 1,098.93tCO 2 is expected to be reduced if this project is implemented from 2014 to 2020. Estimated Reference Emissions: 1,599.97tCO 2 /yr Estimated Project Emissions: 1,442.98tCO 2 /yr Estimated Emission Reductions: 156.99tCO 2 /yr Motor Speed up gear 2nd stage impeller High-efficiency chiller 2nd stage suction vane 1st stage suction vane 2nd stage impeller 20