9am -Wednesday - May 26 Preview 8-4, Tuesday, May 25 or by Appointment 75100 Lower Diamond Road Wallowa, OR 97885 425-486-1246 • 503-463-4444 • Toll Free 1 800-426-3008 www.murphyauction.com PUBLIC AUCTION Closing Wallowa Mill Sawmill Equipment & Rolling Stock James G. Murphy Inc.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
9am -Wednesday - May 26 Preview 8-4, Tuesday, May 25 or by Appointment
MORBARK NW dual stationary head rosserhead debarker w/canted spike rolls, 100 hp drive, FAC 60 hp hydraulic unit, 18’ paddle chain infeed log haul w/hydraulic drive, 25’ H110 outfeed log haul w/4-arm kicker, motor to FALK, s/n: 127
Whole Log Cut Off Saws
L&M 6’ bar type whole log cut off saw, 25 hp, log clamp & stops66” insert tooth whole log cut off saw, 75 hp, w/(3) spare saws54” insert tooth whole log cut off saw, 75 hp, w/(2) spare saws
Step Feeders
(2) 1997 ALOHA MACHINERY 14’x20’ hydraulic 5-step feeders w/60 hp hydraulic unit, job #2095
Headrig Bandmill
KLAMATH 7’ style B right hand double cut headrig bandmill, WEG 300 hp/890 rpm AC motor, mechanical strain, feed through rollcase w/(6) 9”x36” rolls, drives, operators cab w/contents
Resaw
SALEM 6’ single horizontal band resaw, AC 150 hp/1180 rpm arbor drive, air strain, powered knurled feed thru rolls, 8’ powered infeed rollcase, 4’ powered outfeed rollcase, R9-19-38-80, (4) spare COUGAR CUT TECHNOLOGIES 8”x33’ – 2”x.068 gauge resaw bands (new in crate)
Carriage-Drive-Log Turner
SALEM style 42”x10’ 2-knee Temposonic positioned carriage, 66” center to center of knees, log dogs, (2) trucks, pantograph, rail, (2) AUTO QUIP shock absorbers, 90’ of 90 lb rail
SERING/TYRONE BERRY style 100 hp hydraulic carriage drive w/drumSERING 42” hydraulic log turner w/hydraulic unit
Twin End Dogger with Scanner/Optimizer
MAXI-MILL twin end dogging system, w/48” saws, large log side up to 54” saws, system capacities: 4”-26” diameter x 6’-10’ length, large log side w/(2) 48” movable saws, (2) TOSHIBA 150 hp motors, 4-knife bottom slabbing head, 75 hp, (2) 28” 5-key knife type Temposonic positioned slabbing heads, small log side has (2) 48” saws w/(2) 125 hp motors, 4-knife bottom slabbing head (no side slabbing motors), GENCO 20 hp/1200 rpm DC motor to SKK 84 rpm reducer charger drives, (3) JOE scanner heads JS-20-03 w/(2) lasers per head mounted on large log side at 0’-1’-8’ & 9’, log skewing chains & lift arms (no scanning on small log side), infeed log hauls & rollcases, outfeed transfer belts, ALLEN BRADLEY 50 hp DC drive, AB PLC 5/20, computer, control booth w/controls & electrics, FAC 30 hp hydraulic unit, (38) spare 48” saws
Look for additional photos on our website: www.murphyauction.com
Edgers-Optimizer
2001 SALEM 2”x30” top splined arbor edger w/Temposonic positioned 4-saw setworks, TOSHIBA 200 hp arbor drive, key knife chipper head w/200 hp arbor drive, RELIANCE 30 hp w/SEW reducer feed roll drive, knurled feed through rolls, (4) press rolls, SALEM/ALEMITE lube system, 25 & 30 hp hydraulic units, CUTLER HAMMER 7-section MCC w/(1) 150 hp & (2) 200 hp starters, ALLEN BRADLEY 1336 Plus II 30 hp sensorless vector drive, SALEM Temposonic positioned infeed table w/feed chains & press rolls, 12’ 4-strand 81X chain scanner infeed table w/board hooks & pin stops, 9”x54” canted even end rollcase, 12’ 4-strand unscrambler w/hydraulic drive, 30”x10’ & 30”x22’ outfeed belts w/9-finger edger picker system, s/n: 192284.01
SCHURMAN 4”x36” board edger w/keyed arbor, TOSHIBA approx 150 hp arbor drive, 7’ powered infeed rollcase, 48”x24’ outfeed belt
Planer-Pineapple Feed Table-Anti Stain System-Slowdown Belt
COASTAL 16-knife, 6”x8” 4-head stud planer w/80 hp top, 40 hp bottom, 40 hp & 60 hp side heads, in & outfeed rolls w/SIEMENS MIDI-MASTER VECTOR 30 hp sensorless drives, AB BULLETIN 1336 dynamic brakes, (4) spare side heads, parts, s/n: CM275-106
COASTAL 20’ hydraulic single pineapple feed bridge table w/(2) 12”x30” canted spiral rolls, (2) 12”x30” smooth rolls, (2) 12”x14” knurled & (2) 12”x14” smooth rolls, GE 20 hp/1180 rpm drive, GENCO 20 hp MG set, dual pump 20 hp hydraulic unit, spare pineapple & rolls
TDS TECHNOLOGIES custom built anti-stain tunnel w/TDS TECHNOLOGIES tank & controls, SWECO screen, AP AURORA & ROSEDALE centrifugal pumps, LMI metering pumps, SEA METRICS flow meter
4’x10’ slowdown belt,BALDOR 7.5 hp, to NORD 591 rpm reducer
FEDERAL FLR5464, 15 lb low pressure wood fired water tube type boiler, 595 hp, 19,924 mbh, 64,454 sq ft steam, 15,469 net steam mbh, 2976 sq ft heating surface, 390 cu ft boiler single fuel cell furnace, PACE approx 36” FD fan & 24” ID fans, 35 multi-cone ash collector, s/n: 6741BP
WICKES/WELLONS 200 lb high pressure wood fired water tube type boilerSingle fuel cell w/new refractory, PAC 5FSIC3 FD fan, PACE 7AF-SWSI
ID fan, 35 multi-cone ash collector, order #61653-3, both boilers share WELLONS A-19-50 fuel silo w/dual bottom metering augers, approx 24’ diameter x 40’ high, 2004 WELLONS controls w/SIEMENS SIMATIC touch screens, HAUS CLEVELAND opacity monitoring, AB POWERFLEX 70 drive on metering bin auger, main fuel conveyor, feed water tanks & pumps, compressor, original controls, GE 8000 line MCC, approx 32’H x 54’W x 35’L all steel boiler building
Kilns-Drying Sheds-Rail-Carts-Stickers
(3) WELLONS 32’W x 84’L aluminum double track steam fired dry kilns, 72” aluminum fans, TOSHIBA 7.5 hp/900 rpm, 4” kiln fin pipe, FISHER valves (kiln controls & electrics not complete), 10’x100’ control house, spare kiln coils
(3) 16’H x 30’W x 52’L wood frame dry sheds w/metal roofsApprox 3200’ of kiln rail bolted w/platesApprox (96) square tube kiln carts, 62”x72” center to center on wheels,
96”x120” overallApprox (34) square tube kiln carts, 30”x72” center to center on wheels,
46”x120” overallApprox (100) bundles of 3/4”x1-1/2”x58” laminated stickers(11) Lumber carts
Tilt Hoist-P.E.T.-Hula Saw-Swede
2-arm mechanical tilt hoist w/4’ between arms, 63’long x 72” travel, STERLING 15 hp, w/brake to FALK 68 rpm reducer
Precision end trimmer, 7’-10’ capacity w/22” saws, approx 5 hp/3500 rpm motors, even end rollcase, 6’ & 8’ 2-strand lugged feed thru transfers, (2) CLAUSSEN lumber grade stamps, 18”x13’ clean out conveyor, controls
6’ Hula saw trim station w/18” saws, 5 hp/3500 rpm, gravity rolls, powered outfeed belt
SALEM 16” lumber swede, s/n: 7564017
Filing-Grinding Room Equipment
ARMSTRONG #6 right hand bandsaw sharpener, s/n: 9245ARMSTRONG #4 right hand bandsaw sharpener w/strong arm, s/n: 14884ARMSTRONG #6 stretcher roll, s/n: 6741ARMSTRONG 3-60 stretcher roll, s/n: 10953ARMSTRONG #85 auto tipper, s/n: 16729(2) ARMSTRONG #25 circle saw sharpeners, s/n’s: 16117, 14002WRIGHT W150HDB topper/facer, s/n: C9908IMW 380 side grinderFacer/side grinderARMSTRONG #54 hand gummer, s/n: 12245ACME tall hand gummer, s/n: 5373HANCHETTE size E60 hydraulic travel bed grinder, s/n: GK1490JEFFER JF-200 travel bed profile grinder3-3/4”x44” round saw anvil w/setting stand4-3/4”x16” round saw anvil3-3/4”x14” round saw anvilSaw setting stand; babbit milling machine; babbit pouring press, mold & jigs,
3-stage mast, side shift, solid tires, 48” forks, s/n: 5KB01422
FORD 850 Super Duty T/A dump truck, 222 hp V8 gas, TRANSMATIC auto transmission, PTO, 10.00-20 tires, 215,430 miles
TERMS & CONDITIONS
10% BUYERS PREMIUMPAYMENT: Full payment must be made by no later than 4pm,
Thursday, May 27.A 25% deposit is required by the close of business, auction day.Cash, cashiers check, Master & Visa Cards, wire transfers only.
Personal or company checks accepted ONLY with bank letter of guarantee.
Absentee bids accepted with 25% depositREMOVAL: No purchase may be removed during the auction
unless otherwise announced by the auctioneer. Removal schedule announced on auction day.
Announcements made by the auctioneer at the time of sale take precedence over printed matter.
Auctioneer reserves the right to sell accessories, parts or attachments on a separate and/or aggregate basis.
Due to safety & insurance reasons, persons under 12 not admitted.
Washington Auctioneers License #1960
DRIVER DIRECTIONS
From I-84 take Exit 261 turn right onto SR-82/Island Ave. Go left to stay on SR-82/McAllister Rd/Wallowa Lake Hwy, go 10 miles. Keep right to stay on SR-82/Wallowa Lake Hwy, go 30.5 miles, turn right on Lower Diamond Rd. Mill is on the right, watch for signs.
Lodging: Enterprise, OR – 18 miles SE of Wallowa• Best Western 541-426-2000• Ponderosa Motel 541-426-3186• Wilderness Inn 541-426-4535
Joseph, OR – 24 miles SE of Wallowa• A Cowboy River Front Retreat 541-432-1775• Eagle Cap Chalets 541-432-4704• Wallowa Lake Lodge 541-432-9821
LaGrande, OR – 47 miles West of Wallowa• Best Western 541-963-3100• Super 8 541-963-8080• Travelodge 541-963-7116
FOOD SERVICE AVAILABLE AT THE AUCTION SITE
Commercial & Industrial Auctioneers PO BOX 82160 Kenmore, WA 98028