This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
JADUAL I (SCHEDULE I) Type Approval Performance Requirements (G/N - Machinery/Commercial Vehicle)
Item No.
Subject
Particulars of
instrument or other documents containing
requirements
Nature of
requirement
Date of
application
1 Power to weight ratio
Rule of the motor vehicle (C&U)1959. (Minimum 6hp/t)
2
Indicator Performance
E.C.E R6
3
Brake Lamp Performance
E.C.E R7
4 Brake Performance
E.C.E R13
5
Safety Belt Anchorages
M.S 1175 E.C.E R14
6 Exhaust emission (Petrol/LPG/CNG engine)
Peraturan-Peraturan Kualiti Alam Sekeliling (Kawalan Pelepasan Daripada Enjin Petrol) 1996. E.C.E R15 / R83
7 Seats
E.C.E R17
8
Protection Against Unauthorised Use
M.S 1742 E.C.E R18 / R97 / R116
9 Smoke emission (diesel engine)
Peraturan-Peraturan Kualiti Alam Sekeliling (Kawalan Pelepasan Daripada Enjin Disel) 1996. E.C.E R24 / R49
d) Type of fuel _________________________ (e) Engine capacity _______________________
(f) Cycle _______________________
(g) No of cylinder _______________________
(h) Cylinder arrangement _______________________
(i) Bore X Stroke _______________________
(j) Piston Displacement _______________________
(k) Valve arrangement _______________________
(l) Compression ratio _______________________
(m) Max. net power (KW @ r.p.m.) _________________________
(n) Max. net torque (kN m @ r.p.m) ________________________
(o) Type of supercharger
or turbocharger _______________________
(p) Emission gas control system _______________________
(q) Lubricating system
(i) Lubricating method _______________________
(ii) Type of oil pump _______________________
(iii) Type of oil filter ________________________
(iv) Capacity of lubricating oil (l) _______________________
(v) Type of oil cooler _________________________
(r) Cooling system
(i) Cooling method ________________________
(ii) Type of radiator _______________________
(iii) Capacity of cooling water _______________________ (iv) Type of water pump _______________________ (v) Type of thermostat ________________________
8
8. Fuel system
(a) Fuel tank
(i) Material _______________________
(ii) Capacity (litre) _______________________
(iii) Position _______________________
(b) Fuel Pump
(i) Type ________________________
(ii) Flow rate ________________________
(c) Fuel Filter
(i) Type _______________________
(ii) Flow rate _______________________
(d) Fuel Injection
(i) Type _______________________
(ii) Model ______________________
(iii) Method ______________________
(e) Carburetor
(i) Type _______________________
(ii) Diameter of throttle valve (mm) _______________________
(iii) Diameter of venture (mm) _______________________
(iv) Type of choke valve _______________________
(f) Air cleaner
(i) Type _______________________
(ii) Number _______________________
9
(g) LPG/NGV/CNG equipment
(i) Make and Model of LPG/NGV/CNG kit ____________________
(ii) Make and model of container ___________________
(iii) Capacity of container ___________________
(iv) Supplier and authorised installer ___________________
(iv) Performance* __________________ 23. Rear view mirror (Automatic or manual adjustment) (a) Left
(i) Type __________________
(ii) Dimension and radius curvature ___________________ (b) Right
(i) Type __________________
(ii) Dimension and radius curvature __________________ (c) Inside
(i) Type __________________
(ii) Dimension and radius curvature ___________________
(iii) One way or two ways adjustment ___________________ 24. Wipers
(a) Type ___________________
(b) Number ___________________
(c) Performance* ___________________
23
25. Meters and dash board
(a) Speedometer
(i) Type ___________________
(ii) Performance* _____________________
(b) Tachometer
(i) Type ___________________
(ii) Performance* ___________________
(c) Odometer
(i) Type __________________
(ii) Performance* __________________
(d) Other meter fitted
(i) Type __________________
(ii) Performance* __________________ 26. Other accessories fitted
(a) ________________________
(b) ________________________
(c) ________________________
(d) ________________________
(e) ________________________
24
Part III. Other Information The following documents shall be submitted:-
1. Chassis frame strength calculation (not necessary for the monocoque body
frame.
The strength calculation shall be attached.
Please specify the standard adopted.
Note: The measurement by strain gauge etc. may be substituted for strength calculation.
2. Braking Ability Calculation
The braking test data by test vehicles may be substituted for braking ability calculation.
Please specify the standard adopted.
3. Test data/ reports to be attached
The test data/ report as per the requirement as stipulated in schedule 1 of the motor vehicles (Type Approval and Recalling) rules 1998 shall be attached.
I hereby certify that to the best of my knowledge, the above information are correct and I fully understand that should any of the above information is found to untrue, the application may be rejected or the type approval certificate, if issued, may be cancelled or suspended. Date: