Jacob Ruiz W# 0453857 ET 493-01 Senior Design Instructor: C. Koutsougeras Advisors: R. Rode May 9, 2014 Jacob Ruiz W# 0453857 ET 493-01 Senior Design Instructor:

ECOJacob Ruiz

W# 0453857ET 493-01

Senior DesignInstructor: C. Koutsougeras

Advisors: R. RodeMay 9, 2014

Strip

Project OverviewDesign an eco-friendly commercial strip mall that incorporates energy efficient

technology to maximize energy conservation

Concept Drawing

MethodologyIn order to create an effective energy efficient structure, I must:• Design a strip mall • Incorporate different energy saving

techniques into one design • Keep the cost of the project low• Minimize energy consumption• Create a new and unique design.

Green Design Factors

• Low E Windows• Solar Power• Water Recycling System• LED Lighting • Evaporating Water System

Low-E Windows

Solar Power

Solar Power can reduce energy usage up to 40%. The cost of solar energy is high but is no where near as high as the saving that come with it.

Water Recycle System

• System that recycles grey water and uses it for toilet system and sprinkler system. Cuts water usage in half.

LED Lighting

Using LED lighting instead of regular light bulbs increases light intensity while decreasing power usage.

Evaporating Cooling System

• As water heat it evaporates into the air in turn cooling the air.

• Also the water acts as a reflective surface which deflects the sunlight away the surface cooling the area around it.

Concept Design Progress

Autodesk Revit Architecture 2014

Outside 3D View

Outside 3D View

First Story Floor Plan

West Elevation Plan

North Elevation Plan

Hall 3D View

Cross-Sectional Elevation Plan

Restaurant 3D View

Project TimelineFall 2014

• 8/25 – Write final proposal and Survey Land• 9/01 – Work on Site and Foundation Plan• 9/08 – Work on Floor Plan• 9/15 – Work on Roofing Plan• 9/22 – Work on Plumbing and Electrical Plan• 9/29 –Work on HVAC Plan• 10/6 –Work Finishes and Detailing• 10/13 – Work on Material Take-Off and Estimation• 10/20 – Continue working on Material Take-Off and Estimation• 10/27 – Work on Final Report and Presentation• 11/03 – Continue working on Final Report and Presentation

QUESTIONS???

ECOStrip