IWAC04 - Nagoya Institute of Technologyiwac.web.nitech.ac.jp/images.program/IWAC04_program.pdf · The 4th International Workshop on Advanced Ceramics (IWAC04) will be held in Nagoya,

IWAC04

December 10th – December 12th, 2010

Nagoya, Japan

Organized by:

Institute of Ceramics Research and Education

Nagoya Institute of Technology

4th International Workshop on Advanced Ceramics

Scope of the workshop

The developments of ceramics-used functional materials have supported technological

innovation in mechanical and electronics industries as well as in medical sciences. The

objective of this workshop is to present and discuss the status and prospect of ceramics

research.

The 4th International Workshop on Advanced Ceramics (IWAC04) will be held in Nagoya,

Japan, on December 10-12, 2010, organized by Nagoya Institute of Technology (NIT). The

previous conference (IWAC03) was held in Limoges, France, under the auspices of the French

Group of Ceramics and of the European Ceramics Society.

The workshop will cover all aspects of characterization, design and processing technologies,

energy- and environment-related ceramics, information and communication technologies and

biomedical applications. The workshop will be organized in invited and contributed oral

presentations and poster sessions. The presentation of recent ceramics research activities

especially by young researchers is strongly encouraged.

Discussion Topics

1. Energy Materials

fuel cells, solar cells, conductors, electrode, electrolyte, hydrogen, proton, energy conversion,

computational science.

2. Environmentally Conscious Materials

functional electroceramics, linear and nonlinear dielectrics, electro-optic materials,

magnetic oxide materials, catalysts, refractories, ecomaterials, hydraulic binders, construction

materials, thermal barriers.

3. Bio-Materials

calcium phosphates, composites/hybrids, biocompatibility, scaffolds, drug delivery carriers,

tissue engineering, mimetics,

cell-material interactions, biotechnology.

4. Next-generation Materials

crystal structure, simulation, interfaces catalysis, porous structures, hybrids,

molecular precursor design, powder synthesis, coatings, drying, rapid prototyping.

Venues

NIT is accessible from overseas if you go through Central Japan

International Airport, Centrair. Public transportation is available

from the airport to downtown of Nagoya.

Access Map

<by Air>

NIT is accessible from overseas if you go through Central Japan International Airport, Centrair.

Public transportation is available from the airport to downtown of Nagoya. It is recommended

that you take Meitetsu Line from the airport to Kanayama and then change trains to JR Chuo

Line to the next station Tsurumai. About 7 min walk from the station. In total, you'll get to NIT

within an hour from the airport.

<by Bullet Train>

NIT is also very conveniently accessed from other major cities, Tokyo, Kyoto, or Osaka if you

take a bullet train Tokaido Shinkansen. When you arrive at Nagoya Station, change trains to JR

Chuo Line to get to Tsurumai in 6 min. It is only about 7 min walk from Tsurumai Station to NIT.

Access from Tsurumai Station to NIT

Front Gate

Campus Map

Schedule

Date Friday, December 10 Saturday, December 11 Sunday, December 12

Morning - Registration

Invited lectures Invited lectures

Afternoon - Poster presentations

Oral presentations Oral presentations

Evening Registration

Welcome reception Banquet -

Colloquium Time Schedule

Instructions for Presenters

Oral Presentations

1. All the speakers may kindly note that the time allotted for their talk includes the time for Q/A.

The timing will be strictly enforced by the session chairpersons.

2. The 30, 20, 15 min-lectures are 25, 15, 10 min. talk plus 5 min. Q/A, respectively

3. An LCD projector and notebook computer for “Power Point” presentations will be available

at the workshop venues.

<Equipment for presentation>

Oral presentation rooms will be equipped with the following items:

-1 laptop PC (Windows XP, Microsoft Power Point, Adobe Acrobat)

-1 LCD video projector

-1 screen

-1 laser pointer (You are encouraged to bring your own.)

Prepared projectors have a D-sub 15pins connector as a video interface. If you are a

Macintosh user, please bring a necessary adaptor.

During the presentation, please be sure that your PC is connected to a power source to avoid

battery accidents.

Electric currency is uniformly 100 volts AC throughout Japan. Electric outlet sockets accept a

two-leg plug.

We appreciate your kind cooperation in running the program smoothly.

Poster Presentations

Poster session will be held from 13:20 to14:50, 11th December 2010.

A0 format (841 mm wide, 1189 mm high) is the maximum size for the presentation board.

Paper ID will be indicated in the Program Book and on the board on-site.

Poster Presentation Location: Gymnasium at Nagoya Institute of Technology

The poster set up time and removal time are as follows:

- Setting Up time : 13:00-13:20, Dec 11

- Taking Down time : 18:40-19:00, Dec 11

Any posters remaining after 19:00, 11th December 2010, will be removed and disposed of by

the Secretariat.

Oral Session Program

Saturday 11 December

Morning Session: Opening and Invited Lectures (ROOM 5211) (* Invited lecture)

I101* 9:35-10:05

Thermophysical characteristics of green ceramic bodies: evolution due to heat treatment David S. SMITH, Benoît NAIT-ALI

I102* 10:05-10:35

In-situ and ex-situ incorporation of carbon nanostructures into high-temperature ceramic-carbon nanocomposites William Edward LEE, Rafael GUIMARÃES DE SÁ

Break 10:35-10:50

I103* 10:50-11:20

Pressureless sintering and properties of ZrB2-based ultra-High temperature ceramics Zhengren HUANG, Uongjie YAN, Hui ZHANG, Xuejian LIU

I104* 11:20-11:50

Porous ceramics with excellent strength, permeability and capillary rise properties by control of its microstructure Kiyoshi OKADA, Catalin POPA, Toshihiro ISOBE, Ken-ichi KATSUMATA, Akira NAKAJIMA, Taisuke KURATA

Session: Optical Materials (1) (ROOM 5211) (* Invited lecture)

A101* 15:10-15:30

Photo-induced oxidization properties of a silver orthophosphate under visible-light irradiation Naoki KIKUGAWA, Zhiguo YI, Tetsuya KAKO, Shuxin OUYANG, Junyu CAO, Naoto UMEZAWA, Jinhua YE

A102 15:30-15:50

Empirical phase distribution research of the Al(x)-Sr(y)-Si(z) ternary nitride using single crystal and powder X-ray diffractometry Shiro FUNAHASHI, Takashi TAKEDA, Rong- Jun XIE, Naoto HIROSAKI, Nobuo ISHIZAWA

A103 15:50-16:10

High quality opal film coating based on colloidal crystal growth Hiroshi FUDOUZI, Tsutomu SAWADA, Lucien BRUSH

Break 16:10-16:25

Session: Optical Materials (2) (ROOM 5211) (* Invited lecture)

A104* 16:25-16:45

Second harmonic generation properties of TeO2-Bi2O3 metastable phases: experimental and first principles approaches N. BERKAÏNE, J.R. DUCLÈRE, D. HAMANI, O. DURAND,O. MASSON, V. COUDERC, P. THOMAS

A105* 16:45-17:05

SERS-active nanomaterials and their application in detection of narcotics

Yong YANG，Zhengren HUANG, Masaki TANEMURA, Masayuki NOGAMI

A106 17:05-17:25

Persistent spectral hole burning and composition dependence of Judd-Ofelt parameters of Eu3+ ions doped alkali- and earth alkali- fluoroborate glasses Vu xuan QUANG, Vu phi TUYEN, Nguyen trong THANH, Tomokatsu HAYAKAWA, Masayuki NOGAMI, Nguyen anh HONG, Ngo van TAM, Bui the HUY

Break 17:25-17:40

Session: Thin Film Applications (ROOM 5211) (* Invited lecture)

A107* 17:40-18:00

Preparation of MoO3 based hybrid thin films and their VOC sensing properties Ichiro MATSUBARA, Toshio ITOH, Woosuck SHIN, Noriya IZU, Maiko NISHIBORI

A108 18:00-18:20

Piezoelectric Pb(Zr,Ti)O3 thin films by sol-gel and pulsed laser deposition Minh D. NGUYEN, Minh V. LE, Huyen T. BUI, Hung N. VU, Dave H. A. BLANK, Guus RIJNDERS

A109 18:20-18:40

Reversible conversion behavior between AgCl and Ag in RSiO3/2-TiO2 films for rewritable hologram formation Go KAWAMURA, Yuuki TSURUMI, Hiroyuki MUTO, Mitsuteru INOUE , Atsunori MATSUDA

Session: Energy Materials (1) (ROOM 5212) (* Invited lecture)

B101* 15:10-15:30

Development of high thermal conductivity Si3N4 with high reliability Kiyoshi HIRAO, Hideki HYUGA, You ZHOU

B102* 15:30-15:50

Material development of porous ceramics for thermal barrier and thermal insulator Hideaki MATSUBARA

B103* 15:50-16:10

Development of novel techniques for revealing two-dimensional spatial distribution of dislocations on n+-doped 4H-SiC substrate Yukari ISHIKAWA, Yong-Zhao YAO, Yoshihiro SUGAWARA, Katsunori DANNO, Hiroaki SAITOH, Hiroshi SUZUKI, Yoichiro KAWAI, Noriyoshi SHIBATA

Break 16:10-16:25

Session: Energy Materials (2) (ROOM 5212) (* Invited lecture)

B104* 16:25-16:45

Suspension and solution plasma spraying: mechanical and new energy applications Alain DENOIRJEAN, Hélène AGEORGES, Armelle VARDELLE, Michel VARDELLE, Pierre FAUCHAIS

B105* 16:45-17:05

Smart ceramic coatings for energy saving in buildings Minoru KANEHIRA Shanghai Institute of Ceramics (SIC), CAS, China National Institute of Advanced Industrial Science and Technology (AIST), Japan

B106 17:05-17:25

High efficiency selectively-absorbing coatings for solar energy thermal conversion Lei MIAO, Xiu Di XIAO, Gang XU, Sakae TANEMURA

Session: Crystal and Structural Science (ROOM 5212) (* Invited lecture)

B107* 17:40-18:00

Acceleration, improvement of reliability, and automation of MEM-Based pattern fitting analysis and its applications Koichi MOMMA, Takuji IKEDA, Koichiro FUKUDA, Fujio IZUMI

B108 18:00-18:20

A new method to evaluate crystallite size distribution based on statistical analysis of diffraction intensity data Takashi IDA, Taishi GOTO, Hisashi HIBINO

Sunday 12 December

Morning Session: Opening and Invited Lectures (ROOM 5211) (* Invited lecture)

I201* 9:00-9:30

Fabrication of highly sensitive and selective sensors by ink jet printing Fabrice ROSSIGNOL, Bruno FOUSSERET , Martine LEJEUNE, Cédric BOISSIERE , Clément SANCHEZ, Michel WONG CHI MAN , Xavier CATTOEN, Rémi NOGUERA

I202* 9:30-10:00

Nanostructured metal oxides for gas sensing applications Chien NGUYEN DUC

Break 10:00-10:15

I203* 10:15-10:45

Crystal chemistry of complex materials: modelling methods and non-conventional experimental techniques David HAMANI, Laura PORTAL, Olivier MASSON, Philippe THOMAS, Andreï MIRGORODSKY

I204* 10:45-11:15

Spatial distribution of cavities in glasses Shinji KOHARA, Jaakko AKOLA

I205* 11:15-11:45

Field-enhanced bulk conductivity of acceptor-doped BaTiO3 ceramics and related materials A. R. WEST

Session: Bio Materials (ROOM 5211) (* Invited lecture)

A201* 13:20-13:40

Sol-gel based novel composite materials for dental applications Xanthippi CHATZISTAVROU, Vehid SALIH, Aldo R. BOCCACCINI

A202* 13:40-14:00

Structure-property relationship in phosphate invert glasses for biomedical applications Delia S. BRAUER, Natalia KARPUKHINA, Kie FUJIKURA, Sungho LEE, Robert, G. HILL, Toshihiro KASUGA

A203* 14:00-14:20

Bioactive hybrid materials for bone and tooth regeneration Hae-Won KIM

A204* 14:20-14:40

Sol-gel electrospun 3D silicate fibers for bone regeneration Gowsihan POOLOGASUNDARAMPILLAI, Julian R. JONES, Toshihiro KASUGA

Break 14:40-14:55

International session for Young Researchers organized by International Young Ceramist Laboratory

Session: Bio Materials (ROOM 5211)

A205 15:00-15:20

Preparation of poly γ-glutamic acid/ calcium carbonate composites for bone tissue engineering Akiko OBATA, Julian R JONES, Toshihiro KASUGA

A206 15:20-15:40

Surface modification of ceramic endoprosthesis material for cemented application Joana PEDIMONTE, Matthias KORN, Steffen BERGER, Peter GREIL

A207 15:40-15:55

Morphology control of calcium phosphate by mineralization on functional groups –oriented peptide scaffold Takayuki NONOYAMA, Takatoshi KINOSHITA, Masahiro HIGUCHI, Kenji NAGATA, Kimiyasu SATO, Katsuya KATO

A208 15:55-16:10

Preparation of silicate and calcium ion-releasable bead-shaped siloxane-containing vaterite / poly (lactic acid) hybrids Jin NAKAMURA, Akiko OBATA, Toshihiro KASUGA

Break 16:10-16:25

Session: Energy Materials (ROOM 5211)

A209 16:25-16:45

Catalytically coated ceramic plate heat exchanger for Steam Methane Reforming (SMR) S. GOUDALLE, C. BERTAIL, C. BONHOMME, C. CHAPUT, T. CHARTIER, P. DEL GALLO, C. DELAGE, R. FAURE, L. PROST, F. ROSSIGNOL

A210 16:45-17:00

Synthesis and characterization of highly-aligned cupric oxide nanowiers by thermal oxidation of copper foils JianBo LIANG, Naoki KISHI, Tetsuo SOGA, Takashi JIMBO

A211 17:00-17:15

Mesoporous carbon-titania composite as a lithium ion battery electrode Yosuke ISHII, Koki OKAMURA, Tomohiro MATSUSHITA, Shinji KAWASAKI

A212 17:15-17:30

Formation of single wall carbon nanotubes on fluorine doped tin oxide and its application for dye sensitized solar cell Ishwor KHATRI, Naoki KISHI, Tetsuo SOGA, Takashi JIMBO

Break 17:30-17:45

Session: Optical Materials (ROOM 5211)

A213 17:45-18:00

Cathodoluminescence properties of CaZrO3-based perovskite type compounds Yohei SHIMOKAWA, Koji INOUE, Shinya IWATA, Satoshi SAKAIDA, Sawao HONDA, Yuji IWAMOTO

A214 18:00-18:15

Synthesis and photoluminescence properties of (La1-xEux)Si9Al19OxN32-x Tatsuya HORIE, Naoto HIROSAKI, Takashi TAKEDA, Koichiro FUKUDA

A215 18:15-18:30

Optical properties and Judd-Ofelt parameters of Sm3+ doped BiO1.5-WO3-TeO2 glasses Takeshi FUJIWARA, Tomokatsu HAYAKAWA, Msayuki NOGAMI, Jean-René DUCLERE, Philippe THOMAS

A216 18:30-18:45

Joining of zirconia balls by microwave heating Tomoya UMEDA, Kiyoshi HIRAO, Shinobu HASHIMOTO, Hideki HYUUGA, Naoki KONDO, Sawao HONDA, Yuji IWAMOTO

Session: Materials design for Morphology and Microstructure (ROOM 5212) (* Invited lecture)

B201* 13:20-13:40

Global approach of colloidal suspensions structure combining experiments and numerical simulations: application to shaping of ceramics M. BIENIA, C. PAGNOUX, F. ROSSIGNOL, A. VIDECOQ

B202* 13:40-14:00

New composite materials based on clay-cement-natural fiber mixtures Claire PEYRATOUT, Marianne LE TROEDEC, Ali RACHINI, Ismail KHAY, Agnès SMITH

B203 14:00-14:20

Microcellular ceramics with interconnected pore networks Tobias FEY, Peter GREIL

B204 14:20-14:40

Uniformly porous MgTi2O5 with narrow pore-size distribution: in situ processing, microstructure and thermal expansion behavior Yoshikazu SUZUKI, Masafumi MORIMOTO

Break 14:40-14:55

International session for Young Researchers organized by International Young Ceramist Laboratory

Session: Structural Materials and Applications (ROOM 5212)

B205 15:00-15:20

Elaboration and characterization of flexible ceramics: case of aluminum titanate samples A. GALLET-DONCIEUX, M. BOURSIN, J.-P. COCHARD, T. CHOTARD, M. HUGER, P. MICHAUD, T. OTA, N. ADACHI

B206 15:20-15:40

Properties and thermal shock resistance of fine porous alumina for support substrates of ceramic membranes Sawao HONDA, Takaaki SENDA, Norimasa NISHIHARA, Shinobu HASHIMOTO, Tomokazu EDA, Hirokazu WATANABE, Keita MIYAJIMA, Yuji IWAMOTO

B207 15:40-15:55

Synthesis and characterization of high-oriented dense alumina body using a gypsum mold method from platelets Hayato TAKESHITA, Shinobu HASHIMOTO, Sawao HONDA, Yuji IWAMOTO

B208 15:55-16:10

Alumina-nanocarbon electrically conductive composite material by graphitization of polymer in gelcasted green body Tomoaki KATO, Ikuko YAMADA, Takashi SHIRAI, Hideo WATANABE, Masayoshi FUJI, Minoru TAKAHASHI

Break 16:10-16:25

Session: Electronic Materials and Properties (1) (ROOM 5212)

B209 16:25-16:45

Preparation of magnetic oxide ceramics for oxygen sensors Takeshi YOKOTA, Shinya KITO, Qi XIA, Miloslaw BATENTSCHUK, Manabu GOMI, Christoph J. BRABEC

B210 16:45-17:00

Effects of polarization switching on electric properties of lead-free (Li,Na)NbO3 ceramics Takayuki OHASHI, Rintaro AOYAGI, Tomofumi YAMADA

B211 17:00-17:15

Controlling of oxygen vacancy state in Fe-oxides using an external electric field and investigation of the electric properties Shinya KITO, Takeshi YOKOTA, Qi XIA, Miloslaw BATENTSCHUK, Manabu GOMI, Christoph J. BRABEC

B212 17:15-17:30

Influence of crystallinity for magnetic properties of Cr2O3/Cr2O3±X/LiNbO3/ Cr2O3±X/Cr2O3 multi-layer Yasutoshi TSUBOI, Takashi YOKOTA, Shinya KITO, Rempei IMURA, Manabu GOMI

Break 17:30-17:45

Session: Electronic Materials and Properties (2) (ROOM 5212)

B213 17:45-18:05

Oxygen permeation properties of layerd perovskite Sr3-xLaxFeCoO7-δ ceramic membrane Isao KAGOMIYA, Masaya SUZUMURA, Keigo JINBO, Ken-ichi KAKIMOTO

B214 18:05-18:20

First-principles study of around a Ti vacancy in rutile TiO2 Atsuko SUZUKI, Takehiko HIHARA, Osamu YOSHINARI

B215 18:20-18:35

DC magnetic field dependence of the resonant frequency in YIG ceramics Yusuke HAYASHI, Isao KAGOMIYA, Ken-ichi KAKIMOTO, Kazuyoshi KOBAYASHI

B216 18:35-18:50

Abnormal charge accumulation of alkali niobate piezoceramics Hitoshi MATSUDO, Ken-ichi KAKIMOTO, Isao KAGOMIYA

Poster Session Program

Saturday 11 December

Core time: 13:20 – 14:50

P01

Ceramic based composite membrane and their characterization for PEMFCs Uma THANGANATHAN

P02

First-principles studies on olivine-type LiMPO4 (M=Mn, Fe, Co, Ni) compounds as cathodes for rechargeable Li ion battery Masanobu NAKAYAMA, Masayuki NOGAMI

P03

Advanced functional porous, nanocrystal-dispersed and fast proton-conducting glasses prepared via spinodal-type phase separation Yusuke DAIKO, Tetsuo YAZAWA, Tanguy ROUXEL, Jean-Christophe SANGLEBOEUF

P04

Investigation of thermal annealing effects of organic solar cell composed of small organic molecules Yasser A. M. ISMAIL, Tetsuo SOGA, Takashi JIMBO

P05

Synthesis and electrical conductivity of Ruddlesden-Popper type oxides (Sr,La)3(Fe,Co)2O7-δ ceramics Keigo JINBO, Isao KAGOMIYA, Ken-ichi KAKIMOTO

P06

Dielectric properties of oriented (Ba,Sr)TiO3 (BST) series ceramics Keisuke FUKATA, Ken-ichi KAKIMOTO, Isao KAGOMIYA

P07

Preparation of MEA for intermediate temperature type fuel cell Takahiro OINE, Hiroki KATO, Akiko OBATA, Toshihiro KASUGA

P08

Novel anhydrous proton-conducting materials for intermediate-temperature PEM fuel cells Hiroki KATO, Takahiro OINE, Akiko OBATA, Tosihiro KASUGA

P09

Effect of silica nanoparticles addition on proton conductivities of organic-inorganic hybrid materials derived from imidazole and ZnP glass Akinori OZEKI, Akiko OBATA, Toshihiro KASUGA

P10

Ion storage properties of mesoporous carbons heat-treated at high temperatures Koki OKAMURA, Yosuke ISHII, Shinji KAWASAKI

P11

Ion storage mechanism of chemically modified single-walled carbon nanotubes Tsuyoshi INOUE, Ayar A. ALZUBAIDI, Tomohiro MATSUSHITA, Yosuke ISHII, Shinji KAWASAKI

P12

New fullerene derivatives with fluorocarbon substituents for polymer solar cells Ichiko YAMADA, Manoj PANDEY, Yasuhiko HAYASHI, Norio SHIBATA, Testuo SOGA, Takeshi TORU

P13

Chemical solution deposition and photovoltaic properties of BiFeO3 thin films Yan JINGDAN, Manabu GOMI

P14

Interfacial microstructure and interfacial reaction of SiC/SiC joints brazed using Ag-Cu-In-Ti filler alloy Yan LIU, Zhengren HUANG, Xuejian LIU, Yunzhou ZHU

P15

Ceramics-polymer interfacial ion exchange reaction in all solid-state lithium polymer batteries Masanobu NAKAYAMA, Masayuki NOGAMI

P16

Pyrocarbon-coating on LiFePO4 in lithium-ion battery using pressure-pulsed chemical vapor infiltration technique Keisuke ISOGAI, Yoshimi OHZAWA, Tsuyoshi NAKAGIMA

P17

Effect of Mg substitution on crystal structure of oxide-ion conducting apatite-type lanthanum silicates Ryuta HAMAGUCHI, Tomohiro KINOSHITA, Tomoyuki IWATA, Emilie BÉCHADE, Olivier MASSON, Isabelle JULIEN, Eric CHAMPION, Philippe THOMAS, Hideto YOSHIDA, Nobuo ISHIZAWA, Koichiro FUKUDA

P18

Cathodoluminescence properties of Pr3+-doped perovskite type transparent red luminescence thin films processed by sol-gel method Yohei ISHIKAWA, Tomokatsu HAYAKAWA, Koji INOUE, Masayuki NOGAMI

P19

Poling field dependence of electric properties in (Li,Na)NbO3 lead-free piezoelectric ceramics Rintaro AOYAGI, Takayuki OHASHI, Tomofumi YAMADA

P20

Ferromagnetic properties of semiconducting In2O3 thin films Chiyomi MIYAWAKI, Takehiko HIHARA, Ko MIBU

P21

Etching and microstructure observation of (Li,Na,K)NbO3 lead-free piezoelectric ceramics Akinobu KAWAI, Ken-ichi KAKIMOTO, Isao KAGOMIYA

P22

Synthesis and characterization of lithium aluminate red phosphor Yusuke AMANO, Koji INOUE, Shinobu HASHIMOTO, Sawao HONDA, Yuji IWAMOTO

P23

Synthesis and characterization of Mn-activated CaAl12O19 phosphor Shinya IWATA, Shinobu HASHIMOTO, Sawao HONDA, Yuji IWAMOTO, Kouji INOUE

P24

Magnetic permeability of Ni0.5Zn0.5Fe2O4 wood up to 3GHz Chee Kiong SIA, Nobuyasu ADACHI, Toshitaka OTA

P25

Synthesis of palladium(II) NCN-pincer complexes with novel chiral bis(imidazoline) ligands and application to asymmetric reaction Kengo HYODO, Kotaro TSUJI, Shuichi NAKAMURA, Norio SHIBATA, Takeshi TORU

P26

Optical hydrogen sensors using hot-water treated titania and photodeposited noble metal nanoparticles Hiroyuki ODA, Jun-ichi HAMAGAMI, Go KAWAMURA, Hiroyuki MUTO, Atsunori MATSUDA

P27

Catalytic performance of platinum-based diesel oxidation catalyst Masaaki HANEDA, Hideaki HAMADA, Masakuni OZAWA

P28

The oxygen relaxation and mechanical loss measurement of yttria stabilized cubic ceria zirconia Masakuni OZAWA, Kensuke IMURA, Masaaki HANEDA, Masaya AMIMOTO

P29

Oxygen storage capacity and catalytic performance of ceria-based ceramic catalyst Hiroki YUZURIHA, Kaneyasu MARUYAMA, Ryoji KATO, Masaaki HANEDA, Masakuni OZAWA

P30

Formation and characterization of platinum particles from aqueous solution Kei FUJIMOTO, Ryoji KATO, Masaaki HANEDA, Masakuni OZAWA

P31

Hydrogen spillover on Pt nano-particles supported on Al2O3 Tokuya WATANABE, Masaaki HANEDA, Ryoji KATO, Masakuni OZAWA

P32

Characterization of ceria zirconia solid solution powders from coprecipitation method Masaya AMIMOTO, Tatunori SUGIMOTO, Masaaki HANEDA, Masatomo HATTORI, Masakuni OZAWA

P33

Oxygen storage/release capacity of ceria zirconia catalyst prepared by coprecipitation method Kenji KIMURA, Masatomo HATTORI,Masaaki HANEDA, Masakuni OZAWA

P34

Microstructure of thermally stable alumina-based support and catalyst Takahiro NOGUCHI, Kaneyasu MARUYAMA, Ryoji KATO, Masaaki HANEDA, Masakuni OZAWA

P35

Synthesis and characterization of aluminosilicate phosphors derived from zeolites Masahiro AOYAMA, Koji INOUE, Sawao HONDA, Yuji IWAMOTO

P36

Synthesis and characterization of zeolite - geopolymer hybrid bulk bodies from kaolin Hiroaki YOKOYAMA, Shinobu HASHIMOTO, Hayami TAKEDA, Sawao HONDA, Yuji IWAMOTO

P37

Evaluation of mechanical property in polycrystalline translucent ceramics Y. OGIHARA, S. HONDA, Y. L. AUNG, A. IKESUE, Y. IWAMOTO P38

Hydrothermal synthesis of diatomaceous earth covered with calcium silicate hydrate gels Hirotaka MAEDA, Emile H. ISHIDA

P39

Synthesis of fine-grained CaZrO3 perovskite-type red phosphors Satoshi SAKAIDA, Yohei SHIMOKAWA, Koji INOUE, Sawao HONDA, Yuji IWAMOTO

P40

Formation of silicon carbide by carbothermal reduction of silica using a microwave heating technique Syuho OHASHI, Kiyoshi HIRAO, Hideki HYUGA, Shinobu HASHIMOTO, Sawao HONDA, Yuji IWAMOTO

P41

Synthetic study of ceramic-based insulating thin film on a metal substrate Yuki TAKEUCHI, Sawao HONDA, Nozomi KOMADA, Hatsuhiko USAMI, Yuji IWAMOTO

P42

Preparation of MgSiN2 phosphors by combustion synthesis Daiki WAKIMOTO, Shinobu HASHIMOTO, Yuji IWAMOTO, You ZHOU, Kiyoshi HIRAO

P43

Synthetic study of Si-Y-O-N phosphors Taku ISHII, You ZHOU, Kiyoshi HIRAO, Sawao HONDA, Yuji IWAMOTO

P44

Synthetic study of amorphous silica-based inorganic-organic hybrid membranes for carbon dioxide separation Koichiro SEKIMOTO, Sawao HONDA, Yuji IWAMOTO

P45

In-situ observation of the decarbonation of FeCO3 at high temperatures by the single-crystal X-ray diffraction J. WANG, T. SAKAKURA, N. ISHIZAWA, H. EBA

P46

Observation of the interaction between magnetic and crystallographic domains in the transition metal oxides Toru ASAKA, Koichiro FUKUDA, Koji KIMOTO, Yoshio MATSUI

P47

Crystal structure and surface basic properties of Ba-Y2O3 catalyst for direct decomposition of NO Yasuyuki DOI, Masaaki HANEDA, Ryoji KATO, Masakuni OZAWA

P48

Local structural characterization of metal doped-amorphous silica membrane Akito MORI, Koji HATAYA, Sawao HONDA, Yuji IWAMOTO

P49

Preparation and characterization of designed protein-polythiophene nano-composites Takuya UKON, Toshihisa MIZUNO, Kazunori SUGIYASU, Masayuki TAKEUCHI, Takehisa DEWA, Toshiki TANAKA

P50

Preparation of porous HAp bioceramics by gelcasting Jingxian ZHANG, Dongliang JIANG, Qingling LIN, Zhongming CHEN, Zhengren HUANG

P51

Apatite coating on zirconia ceramics utilizing vaterite-particle-implanted poly(L-lactic acid) layer Yuta KOGO, Gowsihan POOLOGASUNDARAMPILLAI, Akiko OBATA, Toshihiro KASUGA

P52

Preparation of polymer/SiV composites for bone tissue engineering Takuma IWATA, Toshiki HOTTA, Kie FUJIKURA, Akiko OBATA, Toshihiro KASUGA

P53

Development of electrospun scaffolds having plate-like cross-linked areas Shingo ITO, Akiko OBATA, Toshihiro KASUGA

P54

Preparation of sea-urchin shaped hydroxyapatite particles Akimitsu SHIMIZU, Yoshio OTA, Akiko OBATA, Toshihiro KASUGA

P55

Preparation of calcium phosphate glasses meltable by CO2-laser irradiation at a low output power Shunichiro TSUBOI, Akiko OBATA, Toshihiro KASUGA, Akiyoshi SHINYA

P56

Preparation of Nb2O5-containing calcium phosphate invert glasses Tomohiro MIYAJIMA, Akiko OBATA, Toshihiro KASUGA

P57

Preparation of cotton-like structured vaterite/poly(lactic acid) composites for bone tissue engineering Hiroki OZASA, Akiko OBATA, Toshihiro KASUGA

P58

Cotton-like siloxane-poly(lactic acid)-vaterite hybrids prepared by an electrospinning method Xian Feng YAO, Hiroki OZASA, Yoshio OTA, Toshihiro KASUGA, Kazuya ORIBE

P59

Chalcogenide colloidal photonic crystals fabricated by spin-coating solution process Hiroshi FUDOUZI, Tsutomu SAWADA, Jiri ORAVA, Lukas STRIZIK, Tomas KOHOUTEK

P60

Numerical simulation of large-scale deformation for grain aggregate -a candidate of deformation mechanism for superplastic elongation- Hiroyuki MUTO, Kohei MURATA, Go KAWAMURA, Atsunori MATSUDA

P61

Multifferoics of Bim+1Fem-3Ti3O3m+3 thin films by sputtering methods Kyohei YAMAGUCHI, Yusuke SHIMIZU, Takeshi YOKOTA, Manabu GOMI

P62

Enantioseparation by achiral silica-gel: Self-disproportionation of enantiomers of the fluorinated heterocyclic compounds Takayuki NISHIMINE, Shinichi OGAWA, Etsuko TOKUNAGA, Norio SHIBATA

P63

Exciton-type superconductivity of Si-coated Sn clusters fabricated by a plasma-gas-condensation Yuichiro KUROKAWA, Takehiko HIHARA, Kenji SUMIYAMA

P64

Production of niobium oxide clusters by pulsed-microplasma-cluster-source Akihiko NIWA, Naoya KUMAGAI, Takehiko HIHARA, Kenji SUMIYAMA

P65

The morphology effect of vertically aligned carbon nanotube forest on fiber spinning T. IIJIMA, H. OSHIMA, Y. HAYASHI, U. B. SURYAVANSHI, A. HAYASHI, M. TANEMURA

P66

Solid-state sintering of ZrB2-SiC composite ceramics Yongjie YAN, Hui ZHANG, Jie YIN, Xuejian LIU, Zhengren HUANG

P67

Synthesis and characterizations of TeO2–TiO2 thin film by sol–gel processing Hideki KOYAMA, Tomokatsu HAYAKAWA, Masayuki NOGAMI

P68

Constructing pertinent models of metal oxide nanocrystals Laura PORTAL, Olivier MASSON, Abid BERGHOUT, Fabien REMONDIERE, Philippe THOMAS

P69

Synthesis and nonlinear optical properties of core-shell Au@TiO2 by organic complexing agent Shouhei HAYASHI, Tomokatsu HAYAKAWA, Masayuki NOGAMI

P70

The investigation of tungsten oxide nanorods growth mechanism using environmental TEM Tadashi KAWAMOTO, Kenta TANAKA, Masato FUJITA, Tomoharu TOKUNAGA, Katsuhiro SASAKI, Kotaro KURODA

P71

Preparation of white light emitting mesoporous carbon-silica nanocomposite Koji SATO, Yukari ISHIKAWA, Akihiro MATSUMURA, Yosuke ISHII, Shinji KAWASAKI

P72

Annealing process and white light emitting property of mesoporous carbon silica Akihiro MATSUMURA, Yosuke ISHII, Yukari ISHIKAWA, Shinji KAWASAKI, Koji SATO

P73

White light emission from thermal treated rice husk Yukari ISHIKAWA, Koji SATO, Yosuke ISHII, Akihiro MATSUMURA, Shinji KAWASAKI

P74

Structural evolution of stoichiometric praseodymium strontium silicate oxyapatite, Pr8Sr2Si4O26 Terutoshi SAKAKURA, Jun WANG, Nobuo ISHIZAWA

P75

Structural analysis of BaAl2O4 at high temperature Tomoyuki IWATA, Hisashi KONAKA, Akimitsu NEZU, Akito SASAKI , Hideo TORAYA

P76

Reversible control in surface plasmon resonance wavelength of gold nanoparticles by using polydimethylsiloxane (PDMS) Yushi TSUTSUI, Hiroshi FUDOUZI, Tomokatsu HAYAKAWA, Masayuki NOGAMI

P77

Compositional dependence on third-order nonlinearities of divalent metal oxide doped niobium tellurite glasses Toshiki SUHARA, Tomokatsu HAYAKAWA, Masayuki NOGAMI, Philippe THOMAS

P78

Synthesis and structural characterization of a new aluminum silicon oxycarbide, (Al6-xSix)(OyC5-y) (x ~ 0.8 and y ~ 1.6) Daisuke URUSHIHARA, Motoaki KAGA, Hiromi NAKANO, Koichiro FUKUDA

P79

Synthesis and structural characterization of a new aluminum oxycarbonitride, Al5(OxCyN4-x-y) (x ~ 1.4 and y ~ 2.1) Haruya INUZUKA, Motoaki KAGA, Daisuke URUSHIHARA, Hiromi NAKANO, Toru ASAKA, Koichiro FUKUDA

P80

Electron density distribution, crystal structure and luminescence properties of Li2SrSiO4:Eu2+ Yoshinori HIRANO, Tomoyuki IWATA, Koichi MOMMA, Koichiro FUKUDA

P81

Electron density distribution and crystal structure of lithium barium silicate, Li2BaSiO4 Tatsunari KUDO, Yoshinori HIRANO, Koichi MOMMA, Koichiro FUKUDA

P82

Doping effect of transition metal ions on magnetic and optical properties of EuO-Al2O3-SiO2 glass Yuta YASUOKA, Tomokatsu HAYAKAWA, Masayuki NOGAMI

P83

Structural disorder and photoluminescence properties of Bi3+- and Mn2+-Codoped Ba3MgSi2O8 phosphor Hideki OKA, Tatsuya HORIE, Tomoyuki IWATA, Koichiro FUKUDA

P84

Structural chemistry of A11Ru4O24 (A=Ca, Sr, Nd, Pr) H. IGUCHI, T. SAKAKURA, J. WANG, N. ISHIZAWA

P85

Synthesis of porous vaterite composites Haruki IMAIZUMI, Hirotaka MAEDA, Emile H. ISHIDA

P86

Synthesis of imogolite and its possibility for biomedical applications Shuji YAMAZAKI, Songho LEE, Keiichi INUKAI, Katsuya KATO, Toshihiro KASUGA

P87

Microstructural analysis of SiC grown on 6H-SiC (0001) substrate by solution growth K. MORIMOTO, K. SEKI, T. TOKUNAGA, T. UJIHARA, K. SASAKI, Y. TAKEDA, K. KURODA