This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
POSTAL ADDRESSLAHORE18-G, Gulberg-IIILahore - 54660, Pakistan
KARACHISunny Side Villa No. 515/8 Bleak House Road,Civil Lines, Karachi-75530
Kelly drilling (without casing oscillator).CFA drilling (pre-equipped with hydraulic and electric installations).FDP Full-Displacement-Piling (pre-equipped with hydraulic andelectric installations).
Kelly drilling (without casing oscillator).CFA drilling (pre-equipped with hydraulic and electric installations).FDP Full-Displacement-Piling (pre-equipped with hydraulic andelectric installations).
13. Sheet Piling Hammer (Air)(1) Make: The British Steel & Piling Co. Ltd. 2
London & Claydon - Suffolk. Size : 7 Serial : 1855(2) Make: Tifine Roven, France. 1
PILE TESTING EQUIPMENT:
14. 2 Sets
15. 2 Sets
16. 2 Sets
Pile Load Test Equipment including loading girders, reactiongirders, jacks, gauges etc for testing piles upto 1,000 Tons.
Pile Load Test Equipment including loading girders, reactiongirders, jacks, gauges etc for testing piles upto 4,000 Tons.
Data Loggers, LVDT's and Computers for remote data collectionof pile tests.
7
Item No. Description Nos. Held
17. 1 SetMake:Model:
Specifications:1)2)
3)4)
5)
6)7)8)
9)10)
11)12)
18. 1 Set
Make:Model:
MUD CLEANER (DESANDER):19. Caviem Mud Cleaner: 2
Make: CAVIEM, France.Model: SB 5/7Nominal Max Allowable Feed: 100 M3/HR
20. Tremmie Pipes and Concrete Buckets: 10
21. Cage Fabrication Equipment 4 Sets
For removing sand from circulating mud/bentonite in large dia holes.
Special quick coupling tremmie pipes etc for placing largevolumes of concrete in piles. (in 100 meter sets).
Bar bending, cutting, and welding equipment for pile cagefabrication. Special mechanical coupling and Swaging equipmentfor large diameter bars (when welding is not permissible).
Pile Dynamic Analysis (PDA) Equipment:
Built-in-VGA external monitor port.
Pile Dynamic Inc. U.S.A.Pile Driving Analyzer® Model PAK
High-visibility transflective color LCD foroutdoor viewing.
To handle casing loads upto 64,000 Lbs., with 6 lines.
Mud Pump: Gardener Denver 7-1/2" x 8".Compressor: LeRoi Model 253 S2, 250 psi.Prime Mover: 2 Nos., G.M. 4-71 "C" Diesel.
Drill Rods - size 4-1/2". 1500 ft.
2. Alfred Wirth All Hydraulic Rotary Drill B-52 2
All Hydraulic Power Swivel with Chain pull down.
Driving Motor: 60 H.P.
Capacity: Rod Size Depth
AQ 1500 MBQ 1200 MNQ 950 MHQ 692 MPQ 259 M
STRAIGHT ROTARY DRILLING EQUIPMENT
Rig can be used universally for drilling for pressure grouting,anchor drilling in all directions, Auger and hollow stem Augerdrilling, Core Drilling, Wireline Drilling, drilling for wells, blastholes, shot holes, ODEX etc., and for any other purposes wherebore holes are required.
13
Item No. Description Nos. Held
1. Longyear 38 Wire Line Core Drill : 3
Capacity:
Rod Size Depth Hole Size Core Size AQ Wireline 3100 ft 48 mm 27 mm BQ Wireline 2400 ft 60 mm 36 mm NQ Wireline 1900 ft 75.7 mm 47.6 mm HQ Wireline 1200 ft 96 mm 63.5 mm AW 2800 ft )Depending on size of core BW 2300 ft )barrel/bits large dia cores NW 1800 ft )and holes possible. HW 1100 ft )
DIAMOND CORE DRILLING EQUIPMENT
Angle Range: 360 Degree
Prime Mover: Deutz F 4L912Make: Longyear - U.S.A.
Pumping Equipment: Bean Royal Flush Pumps Type 535 RQ Powered by 24 H.P. Deutz Diesel Engines F2L511/F2L912
Capacity: Rotary : Depth: 150 MHole size: 64 - 140 mm (2-1/2" - 5-1/2")Percussion: 150 M
Hole size: 64-140mm(2-1/2”-5-1/2”)
Boom: All Hydraulic.ACCESSORIES
Drill Rods 90mm & 115 mm. 1500 ft.
All Hydraulic Power Swivel with chain pull down with long & short masts.
Rig can be used universally for drilling for pressure grouting,anchor drilling in all directions, Auger and hollow stem Augerdrilling, Core Drilling, Wireline Drilling, drilling for wells, blastholes, shot holes, ODEX etc., and for any other purposes wherebore holes are required.
Can drill holes upto 800 MM dia to depths of 250 M in looseformations and 540 MM dia to 200 M in hard formations.
19
Item No. Description Nos. Held
1. ODEX - 165
3
Hole dia: 212 mm (8-11/32")Casing tubes: O.D. 194 mm (7-41/64")
Hole dia: 152 mm (6")Casing tubes: O.D. 140 mm (5-1/2")
I.D. 128 mm (5")
Straight drilling hole dia: 105 - 140 mm (4"- 4-1/2")
3. ODEX - 76:
For top hammer with rock drill type BBE - 57 2Hole Dia: 96 mm (3-25/32")Casing tubes. O.D. 88.9 mm (3-1/2")
I.D. 78.8 mm (3-1/16")
DOWN THE HOLE HAMMERS AND ODEX
Can be used with Atlas Copco's Crawler Drill type ROC- 601.
For the down-the-hole hammer COP 62, and down-the-holehammer Mission A 53 - 15:
DRILLING EQUIPMENT
Can be used with Ingersoll-Rand Crawler drill, Crawlair CM-351, Wirth's drill BO - 50.
DTH ODEX-115 and 165 can also be used with ROC 601 after minor modification.
Can be used with Atlas Copco Crawler drill type ROC - 301 and Wirth's drill type BO-1, Ingersoll Rand's Crawlair CM - 351.
20
Item No. Description Nos. Held
1. TORO 151 Tunnel Loader 1
Make: Sandvik Tamrock Corpn. Finland
Capacity:
a. Tramming Capacity: 3,500 Kg (7,716 lb)b. Breakout force, lift: 61 kN 6,220 Kg (13,710 lb)c. Breakout force, tilt: 55 kN 5,600 Kg (12,360 lb) d. Bucket range (SAE 2:1) 1,35 Cu.M - 1,75 Cu. M (1.8-2.3 Cu.Yd.)
HB 500/400Weights:a. Operating weight: 8,700 Kg (19,180 lb)
12,200 Kg (26,897 lb)
Dimensions:a. Total Length: 6,970mm (274")b Width without bucket: 1,420mm (56")c. Max width(with std bucket):1,480mm (58")d. Height with safety canopy: 1840mm (72")e. Ground clearance: 260mm (10")f. Tunnel size 2.5m x 2.5m (depends on local regulations)
Ample Stocks of Air and Water Hoses, Nozzles and Control accessories.
29
Item No. Description Nos. Held
1. Jetting Pump : 1Make: John W. Stang Corporation Well Point
System & Pumps, USA.Prime Mover: Electric Motor 50 H.P. Siemens
2. Well Point Pumping Set : 6Make: Model : 710Suction Delivery: 8" x 8" 2500 gpm.Priming: Vacuum System.Prime Mover: GM Diesel Model 3 - 71.
3. Well Point Sets, Comprising of:Approx 1,000 sets
4. FLYGT Submersible Pump: 2Make: FLYGT Overseas, Sweden.Model: 2250.011Prime Mover: Electric Motor Driven.Outlet: 8"Capacity: 125 1/s at 25 M Head
5. FLYGT Submersible Pump: 2Make: FLYGT Overseas, Sweden.Prime Mover: Electric Motor DrivenOutlet: 4"Capacity: 30 1/s at 25 M Head
6. FLYGT Submersible Pump (For Mud): 2Make: FLYGT Overseas, Sweden.Model: 2250.011Prime Mover: Electric Motor DrivenOutlet: 4"Capacity: 30 1/s at 30 M Head
7. ZENIT Submersible Pump: 1Make: ZENIT Elektro Pumpe, ItalyPrime Mover: Electric Motor DrivenOutlet: 3"Capacity: 30 1/s at 60 M Head
8. Vacuum Pump : 1
9. Sump Pump : 1
Well Points, Riser Pipes, Header Pipes and Swing Joints.
John W.Stang Corporation, USA.
DEWATERING EQUIPMENT
30
Item No. Description Nos. Held
1. Ingersoll Rand DR - 250 CFM: 1
Normal Operating Pressure: 7 barsActual Delivery: 250 cfm.Prime Mover: GM Diesel: Model 4 - 53
2. Atlas Copco Portable Air Compressor XRH-350 Dd: 1
Maximum Working Pressure: 22 barsNormal Working Pressure: 18 barsFree Air Delivery: I/S 350 (742 cfm)Prime Mover: Deutz Diesel Engine F12L 413 F
3. Atlas Copco Portable Compressor XR-210 Dd : 1
Maximum Working Pressure: 12 barsNormal Working Pressure: 7 bars
210 L/S (450 cfm). Prime Mover: Deutz Diesel Engine FB 6 L 9134. Atlas Copco Portable Compressor XA 350 Dd: 2
Maximum Working Pressure: 8.8 barsNormal Working Pressure: 7 barsFree Air Delivery at full load and pressure at 7 bars: 350 I/S (742 cfm)
Prime Mover: Deutz Diesel Engine F8L 413 F5. Atlas Copco Portable Compressor XA 210 Dd: 1
Max Working Pressure: 8.5 barsNormal Working Pressure: 7 bars Free Air Delivery at normal working pressure: 210 I/S (445 cfm)Prime Mover: Deutz Diesel BF 6 L/913 Air Cooled
6. Atlas Copco Portable Compressor XA 400 Cud : 1
Max Working Pressure : 8.5 bars Normal Working Pressure : 7 bars Free air delivery at Normal working pressure: 395 I/S (835 xfm)Prime Mover: Cummins Diesel (Water cooled)
NT-855-C280
7 Portable Screw Air Compressor with Canopy: 1Make: Air ManModel: PDS 125SPrime Mover: ISUZU Engine MFG-240, 4 Cylinders
load and pressure at 7 bars:
AIR COMPRESSORS
Free Air Delivery at full
31
Item No. Description Nos. Held
8 Portable Air Compressor Puma 1
Make: Puma Industries Co. Ltd.Model: PK 50/60Capacity 751 lit/minPrime Mover: Electric Motor 5HP
Type: NK Rated Output: 10 HPMake: BECO Industries Ltd., Lahore
WELL DEVELOPMENT AND TESTING UNITS
Right angled gear drive D&T Units, suitable for developing and
39
Item No. Description Nos. Held
SAMPLING, TESTING AND PROBING EQUIPMENT
1. Hydraulic Deep Sounding Apparatus for Dutch Cone 1
Penetrometer tests.Make:
Prime Mover: Electric Motor
2. Field Vane Torsion Head : 1
Make: Farnell, England.
3. IOWA Borehole Shear Tester : 1
For in-Situ Shear testing of Cohesive Soils.
Make: W.N. Handy Inc., USA.
4. S.P.T. Sets: 10
5. Auger Boring: 6
6. Undisturbed Sampling Equipment:
Simple valve and basket type valves available to suit the splitspoon sampler in loose and broken strata.
N.V. Goudsche Manchinefabrick, Gouda, Holland.
ACCESSORIES/INSTRUMENTSGEOTECHNICAL INVESTIGATION
Shelby tubes, UDS tubes, thin walls liners of various dimensions,Dension Samplers, Pitcher Sampler, Piston Sampler Swivel typedouble tube core barrels with liner and Mazier triple tube corebarrels with variable core lifter case. These tubes can be usedby manual press and hydraulic operated rotary rigs.
Complete sets with standard fittings to obtain disturbed samplesand a wide range of IWAN and earth augers from 3" to 10".
Complete with various sizes of vanes and extensive lengths ofrods.
(8) Total Station SET-5A (Electronic) - Sokia NTS-355, NTS-325 3 Sets
(9) Total StationTOP Cone GTS-229, GTS-239 3 Sets
SOIL/EARTH COMPACTOR
9. Compactor Plate Type 2
10. Vibratory Roller Compactor Light Duty 1
Complete Soil Mechanics and Material Testing Laboratoryequipment from Soiltest Inc., of USA, capable of carryingout all types of soil and material tests and geological sampling.
Surveying and Levelling Equipment, including Theodolites and Levelling Instruments, etc:
3. Fiber Glass Boat F - 14 Capable of individual 5operation or connected as Platform.
4. Out Board Motors Suzuki 25 HP. 3
5. Outboard Motors Suzuki 40 HP. 9
6. Outboard Motors Suzuki 55 HP. 3
OFFSHORE DRILLING SUPPORT EQUIPMENT
42
Item No. Description Nos. Held
1. UNDER WATER CUTTING LANCES/TORCHES
Manufacture:
Details of WEKA Torches etc:
WEKA Torch UW 12B x 2 M 366
WEKA Torch UW 16B x 2 M 18
WEKA Torch UW 16B x 4 M 20
M & G Brenntechnik AG, Grenchen, Switzerland.
UNDER WATER CUTTING EQUIPMENT
43
Item No. Held
1.
2.
3.
4.
5. Extensive Camping and Kitchen equipment for the field.
6. COMPUTERS:
7. WORKSHOP EQUIPMENT:
A.
B.
TRANSPORT / TRACTORS:
8.
Lathes, Shapers, Drilling, Cutting, Forging, Grinding, Furnacing,Welding & Pipe Rolling Machines,Wire Jacks, Chain PulleyBlock, Hydraulic Jacks, etc. injection laboratory for Detroit DieselEngines.
Complete engine overhauling facility with high tech fuel injectionlaboratory for Detroit Diesel Engines.
Slipforming jacks, hoists and allied equipment for slipforming ofsilos, chimneys, towers etc.
Ancillary equipment and stores for highly specialist works suchas Guniting, Grouting, Colcreting, Underpinning, Tunnelling,Mining, Shaft Sinking Blasting etc.
Description
MISCELLANEOUS EQUIPMENT AND STORES
A fleet of approx 50 vehicles consisting of heavy and lighttransport units e.g. pick-ups, tractors and trollies, Vans, Jeeps,Cars, etc., to meet the requirements of field and station duties.
Steel Scaffolding with allied Couplers etc.
Ample stocks of spare parts to feed all machinery. Sparesinventory runs to over 25,000 items.
25 Nos. Apple Macintosh E Mac, i Mac, Mac Mini, Lap Tops(G5,G4 & G3), Power PC, IIsi, MAC IIvx, MAC IIcx Classic II,LC 475, SE/30 & Pentium Personal Computers networked withApple Laserwriter, HP Color LaserJet 4550N, Laser Writer1600/600 PS, HP LaserJet 2100-B, HP Laser Jet 4M, HP LaserJet P2015 Series (052CFF), HP Laser 5MP, Epson andDeskWriter Printers to produce in house colour graphics and DTPoutput. All offices, stores, technical and design functions arecomputerised for optimum efficiency.