It’s our - Canadian Woodworker.€™s our anneventIversary ... 4 Only TrenD 16" Dovetail Jig ... plans for making furniture, toys, yard ornaments etc. from Workshop Originals.

It’s our annIversary

event

Edmonton//Winnipeg:

Fri, Nov. 13th • 9am-6pmSat, Nov. 14th • 9am-6pmSun, Nov. 15th • noon-5pm

Saskatoon/Calgary:

Fri, Nov. 20th • 9am-6pmSat, Nov. 21st • 9am-6pmSun, Nov. 22nd • noon-5pm

What’s InsIde:

Showcasing our Tool suppliers

Fantastic Savings

shoW tImes

PrIzes at all stores • Chance to WIN

a Rikon 12" Band Saw

• WIN one of 5 Bosch Colt Routers

• Enter FREE draw for great door prizes

• Shop direct with our factory reps and SavE BIg $$$

S A S K A T O O N W I N N I P E G4 – 805 Circle Drive Saskatoon, SK S7K 3S4

T: 306-979-4000 • F: 306-979-4904 • TF: 877-979-4990 E-mail: [email protected]

4920 99th Street N.W. Edmonton, AB T6E 3N6T: 780-702-3000 • F: 780-702-0373 • TF: 877-711-3001

E-mail: [email protected]

1054 Portage Avenue, Winnipeg MB R3G 0S3T: 204-786-3196 • F: 204-783-6867 • TF: 800-665-2244

E-mail: [email protected]

105E – 58th Avenue SE, Calgary, AB T2H 0N8T: 403-255-8743 • F: 403-255-8753 • TF: 877-255-8743

E-mail: [email protected]

E D M O N T O N C A L G A R Y

5 Only Samona 2" 23 Gauge Pin nailer • Reg. $99.95 $55.00

4 Only BoSch 18 Volt Lithium Drill/Impact combo Kit…(has 3 Batteries and 30 min. charger) • Reg. $479.95 $339.95

4 Only BoSch 10" Sliding compound miter Saw (with Free miter Saw Stand) • Reg. $499.95 $449.95

6 Only DremeL 4000 Series V.S. Kit (with Free Flex Shaft) • Reg. $129.99 $124.95

8 Only DremeL multi-max oscillating Tool Kit • Reg. $139.99 $119.95

6 Only FeIn multi-master Deluxe Kit • Reg. $495.00 $399.95

5 Only TrenD airshield Pro Face Shield (Breathe clean air and Stay cool) 8 hour run Time • Reg. $499.95 $395.00

4 Only TrenD 16" Dovetail Jig (Does half Blind, Through, and Variable Space Dovetails) …made By akeeda • Reg. $398.95 $225.00

10 Only excaLIBur Precision miter Guide (Fits most Table Saws) • Reg. $149.95 $99.95

5 Only GeneraL 6" Deluxe Long Bed Jointer • Reg. $949.95 $679.95

3 Only GeneraL 14" Bandsaw 2-Speed 1 hp • Reg. $999.95 $729.95

4 Only New GeneraL 1 3/4 hp “Granite Top” cabinet Saw W/30” Fence • Reg. $1,659.95 $1,124.95

4 Only GeneraL 12" Vari-Speed maxi Lathe • Reg. $799.95 $599.95

4 Only General 1 hp 600 cfm Dust collector • Reg. $349.95 $249.95

4 Only P.c. 5/8"- 2" 18 Gauge Brad nailer Kit • Reg. $129.95 $111.95

6 Only P.c. 2 1/4 hp Vs router Kit (comes with Plunge Base, Fixed Base, height Wrench and case • Reg. $399.95 $319.95

3 Only P.c. 2hp 6 Gal. “Pancake” compressor (with Free Pin100 Pin nailer) • Reg. $249.95 $199.95

4 Only DeWaLT 20" Scroll Saw (complete with Stand and Lamp) • Reg. $899.95 $619.95

6 Only DeWaLT 13" Thickness Planer • Reg. $724.95 $529.95

3 Only DeLTa Dust collector 1 1/2hp 1200cfm (Includes mail In Free Porter cable Tool) • Reg. $639.95 $499.95

4 Only croWn 5 Pc Boxed Set W/ 12 1/2" Beech handles • Reg. $239.95 $159.95

cmT 8" x 12T Flat Bottom Dado Set • Reg. $239.95 $125.00

cmT 12" x 90T compound miter Saw carbide • Reg. $227.95 $115.00

6 Only cmT Basic Pocket hole Jig System • Reg. $128.95 $75.00

2 Only cmT 6 pce ultimate Kitchen cabinet Door Set • Reg. $569.95 $275.00

ww

w.c

anad

ianw

oodw

orke

r.co

mGreaT

door craSHerS

2

3

3 only P.c. 3 1/4 hp 5 Speed Fixed Base router • Reg. $499.95 $419.95

2 only P.c. 3 1/4 hp 5 Speed Production Plunge router • Reg. $559.95 $449.95

P.c. Plate Joiner Biscuits # 0/10/20 and assorted (1000 per Box) • Reg. $43.95 $33.00

5 only P.c. Deluxe hinge routing Kit (up to 9' Doors & 3-4 hinges) • Reg. $429.95 $329.95

4 only DeWaLT 2 1/4hp V.S. router combo Kit (Fixed Base, Plunge Base, and case) • Reg. $319.95 $249.95

3 only DeLTa 1/2 hp chisel mortiser • Reg. $389.95 $329.95

cmT 10" x 24T Glue Line rip Blade • Reg. $105.95 $55.00

cmT 10"x 80T melamine Blade • Reg. $172.95 $90.00

2 only cmT router Bit Set for making crown molding • Reg. $734.95 $359.00

2 only cmT router Bit Set for making Interior man Doors • Reg. $523.95 $255.00

Dust collection hose 2 1/2" x 10' • Reg. $35.00 $20.00

Dust collection hose 4" x 10' • Reg. $40.00 $22.00

Dust collection hose 4" x 20' • Reg. $80.00 $40.00

w

ww

.can

adia

nwoo

dwor

ker.

com

This year has been the most exciting year in recent memory of Canadian Woodworker’s

history. As I write this we are in the middle of wood show season which coupled with the Grand Openings of our two new stores and now our Anniversary Events we will have taken part in 8 sales events in 9 weekends across western Canada this fall. It seems opening two new stores has created three times the work load. While it is very exciting it will be nice to reach a “calming of the seas.”

Our Anniversary Event is a huge weekend sale we have planned for you with unbelievable specials and savings to take advantage of. We have factory reps on hand, lots of new tools, and of course pricing we know you will like.

In past events I used the years in business at each location as our event number. Calgary was our third or fourth anniversary and I have always counted our Winnipeg anniversary since we moved into our current location in 1994. This was the first Grand Opening Sale we put on. We have actually been in the woodworking tool supply business since my father started the company in Winnipeg back in 1967. With the addition of the two new stores in Edmonton and Saskatoon it seems silly to try to list different anniversary dates for each store. I have decided to just say that 2009 is actually Canadian Woodworker’s 42nd Anniversary event. My father is very proud of what he started and deserves this recognition.

Our stores are specifically designed for and dedicated to woodworking enthusiasts. We have a designated area for selling “how-to books” from publishers such as Sterling, Fox Chapel, Taunten Press and a huge selection of detailed plans for making furniture, toys, yard ornaments etc. from Workshop Originals.

Our Winnipeg store has a classroom where we offer woodworking classes for beginners to advanced woodworkers to help them with their woodworking skills. We specialize in classes for woodturning, carving, intarsia, furniture building and cabinet making. At this point in time we have cut back our course selection in Calgary and we are not offering classes in the new stores. This may change in time. Please check out our

website at www.canadianwoodworker.com for our updated class selections and dates and times they will be running in both the Winnipeg and Calgary locations.

As you browse through this flyer you will see we have tools and supplies from companies like Pfiel (Swiss Made), Crown Tools, Oneway, Dremel and Foredom. We carry hand tools, saw blades, router bits, and woodworking clamps from Samona, Big Bear, Shop Fox, Adjustable Clamp, and CMT. We offer power tools from Dewalt, Porter-Cable, Bosch, Fein and Panasonic along with a huge selection of machinery and accessories from General, Delta, SawStop, Laguna Tools, and Rikon Tools.

We are really excited about the new tool lines in our Canadian Woodworker stores this year. They have been selling extremely well. New are Laguna Tools, Rikon Tools, Bosch, Dremel, Roto-Zip, Fein, Grex and SawStop. Stanley Tools are also on their way too.

Our Anniversary Show and Sale starts on Friday November 13th in Winnipeg and Edmonton ending on Sunday November 15th. Our sale in Calgary and Saskatoon starts on Friday November 20th and ends on Sunday November 22nd. I want to take this opportunity to invite you to attend our Anniversary Event to see for yourself how Canadian Woodworker can assist you with your woodworking needs. We will be offering tours of our facility, demonstrations, and of course fantastic savings on all of our woodworking tools. Many of our factory reps will be on hand to show their latest tools, share their knowledge and address any concerns or questions you may have.

Make sure to notice we have included a “Beaver Bucks” coupon on the back of this flyer which is valid only during our anniversary event. It is worth $5.00 off on any purchase over $25.00. We also have great door prizes, promotional incentives, and a chance to win a new Rikon 12” Bandsaw or one of 5 Bosch Colt routers.

Thank you for your support and a special welcome to our new customers Edmonton and Saskatoon.

Cole Moore

table oFCoNteNtS

PAGES 5-11

Showcasing Great Products and Great Prices

PAGES 8-9

New Tools

PAGES 12-13

CW Goes Industrial

PAGES 14-15

Laguna Tools Now at CW

Canadian Woodworker Anniversary Event2009

PaNaSONICPanasonic Li-Ion Jig Saw (no Battery or charger) • Reg. $289.95 $229.95Panasonic 14 Volt Li-Ion Drill • Reg. $429.95 $324.9Panasonic 21.6 Volt Lithium hammer/Driver Drill Kit • Reg. $589.95 $469.955 qty Panasonic 14 V Li-Ion combo Kit • Reg. $619.95 $469.95

adjuStaBlE ClamP COmPaNy Jorgensen Quick Grip/Spreader clamp 6"-36" • Reg. $27.50-44.95 $16.95-22.95Jorgensen hd Series Steel Bar clamp 6"-36" • Reg. $16.95-25.95 $11.95-18.95Pony 1/2" Pipe clamp Fixture • Reg. $16.95 $10.9524 Pony 3/4" Pipe clamp Fixture • Reg. $19.95 $13.50Pony 3/4" Deep reach Pipe clamp • Reg. $23.95 $15.95Jorgensen I-Beam clamps 24" - 72" • Reg. $44.95-61.95 $30.95-42.95Jorgensen cabinet master clamps 12"-60" • Reg. $51.95-82.95 $33.95-54.95Pony Band clamp (2/Pkg) • Reg. $17.95 $10.95Jorgensen miter clamp • Reg. $34.95 $23.95Jorgensen angle clamp • Reg. $34.95 $25.95

BENCh dOg2 Bench Dog Phenolic Top router Table Package • Reg. $689.95 $559.00Bench Dog cast Iron router Table w/Steel Stand Bench Dog and "Woodpecker" router Lift • Reg. $1,319.95 $995.00Bench Dog cast Iron router Table w/Birch cabinet and “Woodpecker” router Lift • Reg. $1,459.95 $1,295.00Bench Dog Saw Blade changing Tool For Table Saws • Reg. $19.95 $15.00Bench Dog offset h.D. Push Stick • Reg. $28.95 $20.00Bench Dog Featherboard • Reg. $29.95 $23.50Bench Dog T-Slot Featherboards (Pack of Two) • Reg. $37.95 $27.50Bench Dog crown molding cutting Jig new • Reg. $54.95 $40.00

Bench Dog cast Iron Table Saw router Table extension (Fits 27" Table Saws) • Reg. $529.95 $375.00Bench Dog aluminum router Table Insert Plate • Reg. $84.95 $70.00ByRd tOOl

13" carbide helical Planer head (For The Dewalt Dw735 Planer) • Reg. $599.95 $449.95Byrd 6" carbide helical Jointer head (For The Delta 37-265x Jointer) • Reg. $499.95 $449.95Byrd 8" carbide helical Jointer head (For The Delta Dj20 Jointer) • Reg. $599.95 $549.95Byrd 15" carbide helical Planer head (For The Delta 22-780x Planer) • Reg. $999.95 $949.95

CmtcmT 10" x 24T Glue Line rip Blade • Reg. $105.95 $55.00cmT 10"x 60T Plywood Blade • Reg. $128.95 $75.00

cmT 10" x 40T combination Blade • Reg. $121.95 $60.00cmT 10"x 50T combination Blade • Reg. $118.95 $60.00cmT 12"x 60T combination Blade • Reg. $174.95 $99.00cmT 10"x 80T melamine Blade • Reg. $172.95 $90.00cmT 12"x 96T melamine Blade • Reg. $229.95 $120.00cmT 10"x 80T compound miter Saw Blade • Reg. $169.95 $85.00cmT 12"x 90T compound miter Saw carbide • Reg. $227.95 $115.00cmT 10" x 24T Thin Kerf rip Blade • Reg. $64.95 $35.00cmT 10" x 42T Thin Kerf combination Blade • Reg. $82.95 $45.00cmT 10" x 50T Thin Kerf combination Blade • Reg. $88.95 $45.00

fanTaSTic

SaLeS

5

all Crown IndIvIdual

woodturnIng tools 10% off

cmT 10" x 60T Thin Kerf Plywood Blade • Reg. $106.95 $55.00cmT 12" x 72T Thin Kerf miter Saw Blade • Reg. $151.95 $75.00cmT 10" x 80T Thin Kerf Fine Finish Blade • Reg. $132.95 $70.00cmT 8"x 12T Flat Bottom Dado Set • Reg. $239.95 $125.00cmT 8"x 24T Precision Dado Set (Includes case, 6-4T chippers and Shim Set) • Reg. $399.95 $225.00

cmT 4" Biscuit Joiner Blade • Reg. $32.95 $20.00cmT 14" x 108T Sliding Panel Saw Blade • Reg. $249.95 $150.00cmT Scoring Saw Blade Set (100-125mm) • Reg. $237.95 $150.00cmT carbide Dowel Drill Bits • Reg. $17.95 $10.00cmT 35mm carbide hinge Drilling Bit (10mm or 1/2" Shank) • Reg. $48.95 $30.00cmT 12 Pce metric Forstner Bit Set • Reg. $152.95 $75.00cmT hSS Planer and Jointer Knives 4" - 20" (Sets of Three) • Reg. $32.95-180.00 $25.00-120.00cmT 1/2" router collet extension • Reg. $79.95 $55.00cmT Spiral router Bit Set • Reg. $379.95 $225.00cmT 13-Pce Deluxe router Bit Set (1/2" Shank) • Reg. $499.95 $250.00cmT Slot cutter Set • Reg. $164.95 $90.00cmT 3-Pce Kitchen Door Set (5/8" Door) • Reg. $329.95 $155.00cmT 3-Pce Kitchen Door Set with Back cutter (3/4" Door) • Reg. $374.95 $185.00cmT 6Pce ultimate Kitchen cabinet Door Set • Reg. $569.95 $275.00cmT router Bit Set For making crown molding • Reg. $734.95 $359.00cmT router Bit Set For making Interior man Doors • Reg. $523.95 $255.00cmT Finger Joint Bit • Reg. $189.95 $99.00cmT Tongue and Groove Set • Reg. $131.95 $75.00cmT Tenon cutting Set • Reg. $209.95 $99.00cmT Grand rabbeting Bit Set • Reg. $236.95 $125.00cmT Window Sash router Bit Set • Reg. $239.95 $125.00cmT Formula 2050 Saw Blade cleaner • Reg. $16.95 $10.00

cmT manual hinge Drilling Jig (used with a hand Drill or Drill Press) • Reg. $399.95 $295.00

cmT 32 mm 5 Spindle Line Boring head (Drill Shelf holes…attaches To hing Drill Jig) • Reg. $329.95 $255.00cmT Deluxe Pocket hole Drilling System • Reg. $324.95 $159.00cmT Basic Pocket hole Jig System • Reg. $128.95 $75.00

CROWN WOOdtuRNINg tOOlSCrown 5 Pc Boxed Set w/ 12 1/2" Beech Handles • Reg. $239.95 $159.95Crown 5 Pc. Boxed Set "Pm Series" w/ 12 1/2" Black Ash Handles • Reg. $449.95 $299.95Crown 8 Pc Boxed Set w/ 12 1/2" Beech Handles • Reg. $399.95 $279.95

dElta3 qty Delta 1/2 hp chisel mortiser • Reg. $389.95 $329.952 qty Delta 20" V.S. Drill Press(Includes mail In Free Porter cable Tool) • Reg. $1,199.95 $969.95

3 qty Delta Professional 14" Bandsaw (3/4 hp motor and Stand) • Reg. $899.95 $729.952 qty Delta 18" Drum Sander w/Stand (Includes mail In Free Porter cable Tool) • Reg. $1,699.95 $1,299.952 qty Delta 10" Left Tilt cabinet Saw (w/1 3/4 hp motor and T2 30" Fence) (Includes mail in Free Porter cable Tool) • Reg. $1,639.95 $1,299.95

6

ww

w.c

anad

ianw

oodw

orke

r.co

m

2 only New Delta 3hp Left Tilt unisaw 52" cut w/Table Drawer and Legs (Includes 2- mail in Free Porter cable Tools) • Reg. $3,999.00 $3,499.953 only New Delta 12 1/2" midi-Lathe 1 hp V.S. • Reg. $859.95 $699.953 only Delta 1hp Deluxe Dust collector w/canister Filter (Includes mail In Free Porter cable Tool) • Reg.$649.95 $529.953 only Delta Dust collector 1 1/2hp 1200cfm (Includes mail In Free Porter cable Tool) • Reg. $639.95 $499.953 only Delta 1250 cfm 3- Speed air cleaner • Reg. $589.95 $469.953 only Delta 12" Vs Bench Drill Press • Reg. $409.95 $339.954 only Delta 6" V.S. Bench Grinder • Reg. $152.95 $129.954 only Delta 8" V.S. Bench Grinder (w/Lamp and White Wheel) • Reg. $229.95 $199.954 only Delta 6" Portable Bench Top Jointer • Reg. $413.95 $339.953 only Delta Bench Top oscillating Spindle Sander • Reg. $394.95 $339.953 only Delta 12 1/2" Portable Thickness Planer • Reg. $399.95 $339.95Delta mortising attachment (For Drill Presses) • Reg. $149.95 $99.95Delta magnetic Lamp (attach To any machine For more Light) • Reg. $29.95 $25.00

dEWalt4 only Dewalt 20" Scroll Saw (complete with Stand and Lamp) • Reg. $899.95 $619.952 only Dewalt hd orbitol Jig Saw Kit • Reg. $209.95 $169.954 only Dewalt 2 1/4hp V.S. router combo Kit (Fixed Base, Plunge Base, and case) • Reg. $319.95 $249.953 only Dewalt 3 1/4hp V.S. Plunge router • Reg. $389.95 $299.956 only Dewalt 13" Thickness Planer • Reg. $724.95 $529.952 only Dewalt 13" Planer w/ Dw7350 Stand • Reg. $999.95 $749.953 only Dewalt 13" Planer with Byrd helical head (head not Installed) • Reg. $1,299.95 $975.00

PORtER-CaBlE4 only P.c. 5/8"- 2" 18 Gauge Brad nailer Kit • Reg. $129.95 $111.954 only P.c. 1 1/2" 18 Gauge Stapler Kit • Reg. $149.95 $119.953 only P.c. 3/4"- 2 1/2" 16 Gauge Brad nailer • Reg. $199.95 $154.954 only P.c. 1" 23 Gauge Pin nailer • Reg. $139.95 $79.952 only P.c. 1/2" upholstery Stapler • Reg. $149.95 $119.953 only P.c. compressor/nailer combo (compressor, hose and 2" Brad nailer) • Reg. $329.95 $239.953 only P.c. compressor/Finish/Brad nailer Kit (compressor, 2 1/2" nailer, 2" nailer) • Reg. $329.95 $269.953 only P.c. 2hp 6 Gal. “Pancake” compressor • Reg. $249.95 $199.952 only P.c. 150 Psi oil Lube horizontal 20 Gal compressor • Reg. $779.95 $669.952 only P.c. 150 Psi 25 Gal Vertical compressor • Reg. $589.95 $499.952 only P.c. 135 Psi 60 Gal cast Iron oil Lube compressor • Reg. $999.95 $829.952 only P.c. 6hp 80 Gal cast Iron oil Lube 175 Psi compressor • Reg. $1,379.95 $1,249.954 only P.c. 1/4 Sheet Sander • Reg. $84.95 $67.955 only P.c. 5" orbital Sander w/case • Reg. $119.95 $94.956 only P.c. 5" Low Profile Professional orbital Sander • Reg. $209.95 $149.956 only P.c. 2 1/2" x 14" mini Belt Sander • Reg. $184.95 $119.953 only P.c. 3"x 21" V.S. Belt Sander • Reg. $264.95 $199.952 only P.c. 4" x 24" V.S. Belt Sander • Reg. $399.95 $339.955 only P.c. Plate Joiner w/Tilt Fence (Works with minature Biscuits Too) • Reg. $369.95 $249.95P.c. Plate Joiner Biscuits # 0/10/20 and assorted (1000 Per Box) • Reg. $43.95 $33.004 only P.c. Laminate Trimmer • Reg. $179.95 $149.95

7

ww

w.c

anad

ianw

oodw

orke

r.co

m

Canadian Woodworkernew

TooLS @FEIN3 only Fein multi-master Starter Kit • Reg. $280.00 $229.95

6 only Fein multi-master Deluxe Kit • Reg. $495.00 $399.95 2 only Fein Turbo I Shop Vac 6 Gallon (With Power Tool auto Start/Stop) • Reg. $399.95 $339.95

2 only Fein Turbo Ii Shop Vac 9 Gallon (With Power Tool auto Start/Stop) • Reg. $519.95 $439.95 1 only Fein Turbo Iii Shop Vac 15 Gallon (With Power Tool auto Start/Stop) • Reg. $569.00 $499.95

gREx aIR tOOlS 4 only Grex 1 3/16" 23 Guage headless Pinner • Reg. $219.95 $150.00 8 only Grex 1 3/8" 23 Gauge headless Pinner • Reg. $299.95 $219.95 10 only Grex 2" 23 Gauge headless Pinner (With auto Lock out) • Reg. $489.95 $349.95 Grex 5/8"-2" 23 Gauge Pin nails (2.5m/Pkg) • Reg. $9.95-19.95 $6.95-17.95 2 only Grex Pneumatic 2" hardwood Flooring Stapler • Reg. $499.95 $369.95

2 only Grex 1 1/4" Laminate Flooring Stapler • Reg. $258.95 $179.95 2 only Grex 1/4" crown 1 9/16" Stapler • Reg. $279.95 $199.95 2 only Grex T-50 3/8" crown 5/8" 20 Gauge Stapler (Shoots T-50 Staples) • Reg. $159.95 $114.95 2 only Grex 22 Gauge uphlolstery Stapler 3/8" crown • Reg. $149.95 $119.95 2 only Grex 7/16" crown 2" 16 Gauge Sheathing Stapler • Reg. $369.95 $259.95 4 only Grex 2" orbital air Sander (Fantastic For Woodturners runs on 2.2 cfm) • Reg. $159.95 $119.95 2 only Grex 2" Disc Sander/Die Grinder • Reg. $129.95 $99.95

dREmEl tOOlS 8 only Dremel multi- max oscillating Tool Kit • Reg. $139.99 $119.95 4 only Dremel 300 Series V.S. Kit • Reg. $99.99 $84.95

6 only Dremel 4000 Series V.S. Kit (With Free Flex Shaft) • Reg. $129.99 $124.95 Dremel Lithium-Ion cordless Tool Kit • Reg. $119.99 $99.95 Dremel Dual Temp Glue Gun Kit • Reg. $32.99 $26.95 Dremel engraver • Reg. $29.99 $21.95 Dremel Shaper/router Table • Reg. $39.99 $34.95 Dremel Flex-Shaft • Reg. $35.99 $30.95 Dremel Sharpening attachment Kit • Reg. $21.99 $15.95 Dremel Woodburner Kit • Reg. $33.99 $27.95

ROtOzIP 5 only rotozip Drywall router • Reg. $99.99 $79.95

rotozip rz!00 Spiral Saw Tool Kit • Reg. $149.99 $134.95 rotozip 18 V Litheon cordless Tool • Reg. $249.99 $219.95

8

RIkON tOOlS

6 only rikon 10" Benchtop Bandsaw • Reg. $329.95 $259.95 4 only rikon 1 hp 2-Speed 12" Bandsaw • Reg. $899.95 $779.95 4 only rikon 1 hp 2 Speed 14" Bandsaw • Reg. $749.95 $599.95 4 only rikon 14" 1 1/2 hp resaw Bandsaw • Reg. $1,149.95 $899.95 2 only rikon 6" Jointer • Reg. $649.95 $499.95 6 only rikon 4" x 6" Belt/Disc Sander • Reg. $189.95 $159.95 3 only rikon 6" x 10" Belt/Disc Sander With Stand • Reg. $519.95 $399.95 2 only rikon 12" Disc Sander • Reg. $299.95 $239.95 4 only rikon 12" x 16" mini Lathe • Reg. $439.95 $349.95

SaFEty SPEEd Cut

Ssc hot air edgebander (Power Feed and Top/Bottom Trimming) • Reg. $10,595.00 $9,495.00 1 only SSc Glue Pot edgebander (Power Feed and Top/Bottom Trimming) • Reg. $13,995.00 $12,995.00 1 only Ssc 60" cut Vertical Panel Saw (c/w Stand and Wheels) • Reg. $3,195.00 $2,295.00

SaWStOP 2 only Sawstop 10" contractor Saw w/ cast Wings and 52" Fence • Reg. $2,293.95 1 only Sawstop Professional 3 hp cabinet Saw w/52" Fence and Table extension • Reg. $3,494.95 2 only Sawstop 10" 5hP Industrial Saw w/ 52" Fence, rails, and extension Table • Reg. $4,878.00

BOSCh Bosch 25' 12 Gauge extension cord • Reg. $44.95 $30.00 Bosch 50' 12 Gauge extension cord • Reg. $79.95 $60.00 1 only Bosch 5/8" VSr hammer Drill Kit • Reg. $169.95 $139.95 4 only Bosch V.S orbital Jigsaw Top-handle • Reg. $249.95 $199.95 2 only Bosch recipricating Saw Kit • Reg. $179.95 $139.95 2 only Bosch 7 1/4" Left hand circular Saw • Reg. $225.00 $139.95 2 only Bosch 3 1/4" Planer w/case • Reg. $299.95 $199.95 4 only Bosch “colt” V.S. Palm router Kit • Reg. $199.95 $149.95 5 only Bosch V.S. 2 1/4hp Plunge/Fixed Base router combo Kit • Reg. $429.95 $319.95 2 only Bosch V.S. 3 1/4 hp Plunge router • Reg. $559.95 $499.95 3 only Bosch “Flushcut” Power handsaw • Reg. $189.95 $149.95 3 only Bosch 10" Portable Table Saw w/Gravity rise Stand and Digital readout • Reg. $859.95 $699.95 4 only Bosch 10" Sliding compound miter Saw • Reg. $499.95 $449.95 4 only Bosch 10" Dual Bevel Sliding compound miter Saw • Reg. $769.95 $579.95 2 only Bosch 12" Dual Bevel compound miter Saw • Reg. $549.95 $499.95 3 only Bosch 12" Dual Bevel Sliding compound miter Saw • Reg. $869.95 $679.95 2 only Bosch “Gravity-rise” miter Saw Stand w/Wheels • Reg. $399.95 $299.95 1 only Bosch “Power Box” (charger/Stereo/cd Player w/remote) • Reg. $299.95 $239.95 3 only Bosch 4V “max Litheon” Screwdriver • Reg. $129.95 $104.95 3 only Bosch 12V "max" I-Driver Kit • Reg. $249.95 $179.95 3 only Bosch 12V "max Pocket Driver" Kit • Reg. $199.95 $149.95 3 only Bosch 12V "max" 2-Speed Drill/Driver Kit • Reg. $229.95 $169.95 3 only Bosch 12V "max" Impact Drill Kit • Reg. $279.95 $199.95 3 only Bosch 12V "max multi-x carpenter" multi Tool Kit • Reg. $359.95 $259.95 2 only Bosch 4 Pcs 12 Volt "max" combo Kit • Reg. $549.95 $449.95 3 only Bosch 14.4 Volt Lithium cordless Drill Kit (2-Batteries and charger) • Reg. $259.95 $219.95 3 only Bosch 18 Volt Lithium cordless Drill Kit (2-Batteries and charger) • Reg. $269.95 $229.95 4 only Bosch 18 Volt Lithium Drill/Impact combo Kit (has 3-Batteries and 30 min. charger) • Reg. $479.95 $339.95 3 only Bosch 18 Volt circular Saw (one Battery/no charger) • Reg. $219.95 $160.00 3 only Bosch 18 Volt recipricating Saw (one Battery/no charger) • Reg. $219.95 $160.00 4 only Bosch 1/4 Sheet Palm Sander w/case • Reg. $94.95 $79.95 5 only Bosch 5" random orbit Sander w/hook/Loop Pad • Reg. $99.95 $89.95 3 only Bosch 5" V.S. random orbit Sander w/hook/Loop Pad • Reg. $139.95 $109.95 2 only Bosch 6" V.S. orbital Sander • Reg. $329.95 $279.95 2 only Bosch 15 Gauge 2 1/2" angled Finnish nailer • Reg. $319.95 $269.95 4 only Bosch 2 1/2" 16 Gauge Finish nailer • Reg. $299.95 $229.95 3 only Bosch 3 1/4" clipped head Framing nailer • Reg. $469.95 $359.95 2 only Bosch roofing coil nailer • Reg. $469.95 $389.95

9

see In store for sPeCIals

all oneway woodturnIng ChuCks and

aCCessorIes are 10% off

3 only P.c. 1 1/2 hp 1/2" router • Reg. $219.95 $179.956 only P.c. 2 1/4hp Vs router Kit (comes with Plunge Base, Fixed Base, height Wrench and case • Reg. $399.95 $319.953 only P.c. 3 1/4hp 5 Speed Fixed Base router • Reg. $499.95 $419.952 only P.c. 3 1/4 hp 5 Speed Production Plunge router • Reg. $559.95 $449.95P.c. universal 2-Sided Feather Board • Reg. $9.95 $5.004 only P.c. 12" Deluxe Dovetail Jig (half Blind and Through Dovetails) • Reg. $249.95 $199.955 only P.c. Deluxe hinge routing Kit (up To 9' Doors and 3-4 hinges) • Reg. $429.95 $329.952 only P.c. Passage Lock Boring Jig Kit • Reg. $399.95 $299.95

gENERal WOOdWORkINg maChINERy4 only General 1 hp 600 cfm Dust collector Door crasher) • Reg. $349.95 $249.954 only General 1 1/2hp 1200 cfm Dust collector • Reg. $499.95 $419.953 only General 1 1/2hp Dust collector w/canister Filter • Reg. $699.95 $559.952 only General 2 hp Dust collector w/canister Filter • Reg. $849.95 $779.954 only General 800cfm hanging air cleaner • Reg. $449.95 $359.954 only General 1300 cfm 3- Speed hanging air cleaner • Reg. $569.95 $419.951 only General 2 Stage Dust collector 3hp w/canister Filter • Reg. $3,449.95 $2,399.952 only General 6" x 89" edge Sander • Reg. $999.95 $849.951 only General 24" Single Drum Sander • Reg. $1,779.95 $1,399.952 only General 24" Double Drum Sander • Reg. $2,499.95 $1,995.003 only General oscillating Spindle Sander • Reg. $499.95 $399.954 only General 12" Vari-Speed maxi Lathe • Reg. $799.95 $599.952 only General 14" x 30" V.S. Wood Lathe • Reg. $1,999.95 $1,779.952 only General 16" x 42" V.S. Wood Lathe • Reg. $2,259.95 $1,950.002 only General 15" 3 hp Planer • Reg. $1,799.95 $1,499.952 only General 15" helical Planer 3hp • Reg. $2,999.95 $2,299.952 only General 20" helical 5 hp Planer • Reg. $4,659.95 $3,750.001 only General 20" helical Planer 7.5 hp • Reg. $6,499.95 $5,899.952 only General 3/4" Spindle Wood Shaper 3 hp • Reg. $1,629.95 $1,349.953 only General 10" Left Tilt contractor Saw w/28" T-Square Fence • Reg. $1,099.95 $969.954 only New General 1 3/4 hp "Granite Top" cabinet Saw w/30" Fence • Reg. $1,659.95 $1,124.952 only General 10" 3 hp cabinet Saw w/50" cut (Table Board and Legs Incl) • Reg. $2,499.95 $1,899.952 only General 10" 3 hp cabinet Saw “canadian made” w/50" cut (comes with riving Knife) • Reg. $3,799.95 $2,795.001 only General 10" Sliding Table Scoring Saw 3hp 1Ph (c/w 50-565 outrigger Table) • Reg. $5,799.95 $4,995.003 only General Tilt head Bench Top mortiser • Reg. $629.95 $559.954 only General 14" Bench Drill Press • Reg. $329.95 $299.954 only General 14" Floor model Drill Press • Reg. $389.95 $329.95

4 only General 17" Floor model Drill Press • Reg. $649.95 $479.952 only General 22" Floor model Drill Press • Reg. $1,149.95 $979.951 only General 13 Spindle Line Boring machine c/w Stand • Reg. $1,699.95 $1,525.004 only General 6" Jointer (open Stand) • Reg. $799.95 $579.955 only General 6" Deluxe Long Bed Jointer • Reg. $949.95 $679.952 only General 8" helical head Jointer • Reg. $2,699.95 $2,249.953 only General 14" Bandsaw 2-Speed 1 hp • Reg. $999.95 $729.952 only General Workbench w/2 Vises and Steel Legs (60" x 30" oak Top) • Reg. $899.95 $749.956 only General Tenoning Jig • Reg. $159.95 $119.954 only General 7" Woodworkers Vise • Reg. $119.95 $109.9524 only General mobile machinery Base • Reg. $79.95 $60.00

ONEWay WOOdtuRNINg tOOlS

ExCalIBuR2 only excalibur 21" Scroll Saw c/w Stand • Reg. $799.95 $779.952 only excalibur 30" Scroll Saw c/w Stand • Reg. $1,199.95 $979.95

4 only excalibur Blade Guard System (with 4" Dust Port) • Reg. $429.95 $350.003 only excalibur 49" Sliding Table attachment • Reg. $1,199.95 $675.002 only excaliber Deluxe 60" Sliding Table attachment • Reg. $1,599.95 $1,295.004 only excalibur Deluxe Band Saw Fence • Reg. $199.95 $159.9510 only excalibur Precision miter Guide (Fits most Table Saws) • Reg. $149.95 $99.95

magSWItChmagswitch magnetic Pro Featherboard combo (comes with Vertical attachment) • Reg. $82.95 $59.00magswitch magnetic 2-Side Featherboard • Reg. $54.95 $45.00

ww

w.c

anad

ianw

oodw

orke

r.co

m

10

all PfIel (swIss Made) CarvIng tools

are 15% off

all razertIP Burners and hand PIeCes are 10% off

magswitch magnetic resaw Bandsaw Fence Kit • Reg. $159.95 $125.00magswitch Dual roller magnetic Fence Kit • Reg. $159.95 $130.00magswitch Deluxe resaw/Dual roller Fence Kit • Reg. $199.95 $160.00magswitch 20mm mag-Jig make Your own magnetic Shop Jigs) • Reg. $31.95 $27.00Magswitch 30mm Mag-Jig (Get 2 For $65.00) • Reg. $39.95 $35.00

PFIEl CaRvINg tOOlS

RazERtIP WOOdBuRNINg tOOlS

tRENd5 only airshield/Pro Trend airshield Pro Face Shield (Breath clean air and Stay cool) 8 hour run Time • Reg. $499.95 $395.00Trend airshieldpro ear Protect • Reg. $65.00 $50.003 only Trend Powered Face Shield (Breath clean air and Stay cool) 4 hour run Time • Reg. $399.95 $295.00Trend router Jig To cut Kitchen countertop • Reg. $223.75 $175.00Trend router Bit Storage Tray • Reg. $29.95 $20.00Trend hinge Jig • Reg. $319.95 $250.00Trend Door holder clamp • Reg. $23.95 $20.00Trend Door holder Stand • Reg. $73.75 $55.00Lock/Jig Trend mortise Lock routing Jig • Reg. $223.75 $175.00Trend 16" Dovetail Jig (Does half Blind, Through, and Variable Space Dovetails) made By akeeda • Reg. $398.95 $225.00Trend credit card Size Diamond Sharpening Stone • Reg. $48.75 $29.00Trend Diamond Sharpening Steel 10" (Great Tool In The Kitchen) • Reg. $81.24 $45.00Trend ultimate Diamond Sharpening Kit (can Sharpen carbide and hss Tools) • Reg. $293.75 $195.00Trend Diamond Penfile • Reg. $73.75 $45.00Trend Deluxe Push Stick • Reg. $12.95 $9.00Trend router Jig To cut Staircase Stringers • Reg. $369.95 $319.95Trend 3/4 hp V.S. Plunge router • Reg. $161.26 $129.95Trend Shelf Boring Jig (Drill Shelf Pin holes on 32mm centers) • Reg. $99.95 $89.00

tORmEk2 only Tormek T7 10" Basic Power Sharpening center • Reg. $707.99 $689.952 only Tormek T7 "hand Tools" Sharpening Package • Reg. $849.99 $799.952 only Tormek T7 "Woodturners" Sharpening Package • Reg. $915.99 $879.952 only Tormek T7 “ultimate” Sharpening Package • Reg. $1,345.99 $1,299.95

vIkINg BaNdSaW BladESall Viking Band 59 1/2" • Reg. $17.95 $13.95all Viking Band 63 1/2" • Reg. $17.95 $14.95all Viking Band 70 1/2" • Reg. $- $14.95all Viking Band 72 • Reg. $17.95 $14.95all Viking Band 82 • Reg. $19.95 $16.95all Viking Band 93 1/2" all Sizes From 3/16" - 3/4" Width • Reg. $23.95 $18.95all Viking Band 97 1/2" • Reg. $23.95 $19.95all Viking Band 98 1/2" • Reg. $27.95 $19.95all Viking Band 99 1/2" • Reg. $32.95 $19.95all Viking Band 105" • Reg. $25.95 $19.95all Viking Band 111" • Reg. $27.95 $22.95all Viking Band 125" • Reg. $- $25.95all Viking Band 131 1/2" • Reg. $37.95 $28.95all Viking Band 146" • Reg. $- $34.95all Viking Band 150" • Reg. $44.95 $37.95all Viking Band 153" • Reg. $39.95 $34.95

WIxEyWixey Digital Fraction caliper • Reg. $49.95 $35.00Wixey Digital Height Gauge • Reg. $79.95 $51.00Wixey Digital Angle Gauge • Reg. $49.95 $35.00Wixey Digital Protractor • Reg. $79.95 $51.00Wixey Digital Planer Readout • Reg. $79.95 $50.00Wixey Remote Digital Readout For Router Tables • Reg. $99.95 $60.00Wixey Digital Fence Readout • Reg. $169.95 $95.00Wixey Digital Planer Package • Reg. $129.95 $80.00Wixey Digital Table Saw Package • Reg. $349.95 $200.00Wixey Work Shop Digital Package • Reg. $499.95 $300.00Wixey Ultimate Digital Package • Reg. $599.95 $355.00

WOOdPECkERS4 only Woodpecker Ultimate Drill Press Table (c/w 2-Flip Stps and 2- Hold Down Clamps) • Reg. $229.95 $149.95Woodpecker Plunge Router Lift (Fits Hitachi M12v) • Reg. $269.95 $195.006 only Woodpecker Prl-V2 Ultimate Router Lift • Reg. $429.95 $329.95Woodpecker 12" Precision Aluminum Square • Reg. $129.95 $95.00Woodpecker 48" Straight Edge Engraved Ruler • Reg. $139.95 $95.00Woodpecker 12" Carpenters Square • Reg. $129.95 $95.00Woodpecker 12" T-Square Ruler • Reg. $129.95 $95.00

11

ww

w.c

anad

ianw

oodw

orke

r.co

m

My name is Cole Moore and I am the president of Canadian

Woodworker. I am based out of our head office in Winnipeg, along with my sister Erin Taylor. Our company was founded on our fathers love for woodworking, and drive

as an industrial representative serving his customers in the educational and manufacturing sectors of Manitoba. I am thrilled that with the help of some great new people we are more able than ever to service the woodworking industry in Manitoba, Saskatchewan, and Alberta.

We are absolutely delighted that a gentleman by the name of Wayne Maron, based in Edmonton, has joined our team and will oversee, not only all four of our stores, but will head up our new Industrial/Educational division. Wayne has over 20 years experience serving our industry

in Western Canada and we welcome all of his old customers to look him up in his new role with us. Over the last couple of months Wayne has been assembling his team. You will meet them all here in this flyer, as well as when they come calling at your door. These gentlemen are all well experienced, seasoned, professionals we know will be a great help to you and your classroom or business.

In addition to the many great lines of tools and supplies we already have for woodworkers in western Canada, we are pleased to have acquired some new product lines which will better round out our services. I have included a supplier list to show the companies we are now representing.

We look forward to being able to work with you industrial/educational requirements in the near future.

Cole Moore

3m Canada Coated Abrasives (Discs, Belts, Sheets) laguna tools Woodworking Machinery

adjustable Clamp Woodworking Clamps magswitch Inc. Magnetic Hold Downs and Jig

axiom Industries Power Feeder and Edgebander Wheels mirka abrasives Coated Abrasives

Wixey development Digital Measuring Tools Panasonic tools Industrial Cordless Power Tools

Beaver tools Inc. Pneumatic Trimmers and Routers Process Engineering Graphite Backing Materials

Bench dog tools Industrial Router Tables R & R Clamp Co Specialty Stacking Clamp Systems

Black & decker dewalt, Delta, and Porter-Cable Rikon tools Machinery

Byrd tool Corp Custom Helical Carbide Cutter Heads Robert Bosch Power Tools

Clapham's Beeswax Furniture Salad Bowl/Breadboard polish Royce-ayr tools Industrial Quality Router Bits

Cmt uSa, Inc. Router Bits, Saw Blades and Boring Bits Safety Speed Cut Edgebanders, Vertical Panel Saws

Cooper Power tools "Master Power" Pneumatic Hand Tools Samona Int. Dust Collection, Hand Tools

denray machine Inc. Down Draft Sanding Tables SawStop Table saws and safety equipment

Eezer Products Inc. Orbital Sander Backing Pads Franklin Int. "titebond" Wood Glues

Fein Tools Multi-Master power tools trend technology Diamond Sharpeners, Respirators

Forest City tool Drilling Tools and Chisels Whiteside machine Industrial Quality Router Bits

general International Woodworking Machinery Powermatic Woodworking Machinery

grex tools Pneumatic Nailers and Staplers Woodpeckers, Inc. Measuring Tools and Router Lifts

jessem tool Router Tables and Sliding Tables Woodstock Int. Dust Collection, Hand Tools

klingspor Inc. Coated Abrasives Woodworker's haven "Viking" Bandsaw Blades

12

man

itob

a

Canadian Woodworker

new induSTriaL

educational division @

my name is DanIeL meSSeTT. I have been involved in the construction industry for over 30 years in both the commercial and residential sectors. after my carpentry apprenticeship at S.a.I.T. Polytechnic in calgary, and acquiring a diploma in adult education, I became head instructor for the Southern Interior construction association in British columbia. I eventually moved into management of various new home construction companies, one of which was a recipient of the alberta award of excellence in housing Design and Innovator of the Year from c.m.h.c. In my new role as team leader and account manger of our calgary operation I look forward to meeting many of you as I travel around to the schools and cabinet shops in and around calgary. our company canadian Woodworker has a fantastic range of products and I look forward to helping you choose the tools the best suit your needs.

Phone 403-255-8743 • Fax 403-255-8753 • Toll Free 877-255-8743

my name is WaYne maron and I am responsible for overseeing the operations of our four stores as well as manage our sales force for Industrial/educational sales in alberta, Saskatchewan and manitoba. I am pleased to bring to canadian Woodworker my twenty years of woodworking industry related experience which has spanned western

canada. These are very exciting times as we take well established stores in Winnipeg and calgary, and now add edmonton and Saskatoon. Through the strength of a company that has been in business since 1967 and my new sales team, we have a vast amount of knowledge to help you with your woodworking needs. Please contact me or our representative in your area with any questions or information you may need. I look forward to working with all of you in my new roll and hope to see many of my past and future customers in the coming months.

Phone 780-702-3000 • Fax 780-702-0373 • Toll Free 1-877-711-3001

WAYNEEdmoNtoN

Let me introduce myself, I am roD marKeWIch, one of two Industrial/educational account managers for canadian Woodworker in Saskatchewan. having 18 years experience in industrial tool sales spanning three cities in Western canada I have come to appreciate the hard work it takes everyday for you to get the job done. That is why I chose canadian

Woodworker, and I look forward to travelling the province assisting woodworkers finding solutions to meet their woodworking needs. Through our great showroom, extensive product selection and knowledgeable staff, I know we have what it takes to find you the right tool for the job, every time. We are excited about the opening of our latest location in Saskatoon at 805 circle Drive and are ready to provide you with great quality products and great service. Stop in and check us out, from machinery and accessories to fine carving chisels and everything in between, we have what you need to complete any woodworking project.

Phone 306-979-4000 • Fax 306-979-4904 • Toll Free 877-979-4990

RODn. SaSkatchewan

DANIELcALgAry

my name is mIcK WeST, I have lived in Saskatchewan all my life, except for attending school for four years in Toronto. I worked for 25 years in commercial industrial photography, everything from Potash mines to medical. I then spent nine years in the heavy steel fabrication industry before joining a former tool house as an industrial account manager for the

last five years. Throughout my time I have been an avid woodworker spending every spare minute in my 800 square foot shop. over many years I have come to know the many shop teachers, cabinet shop and construction owners in southern Saskatchewan. I have always been able to solve any problems and be able to recommend and source the proper tools for my customers.

I look forward to seeing my past customers and always enjoy making new ones. I will be based out of regina and can be contacted on my cell phone anytime. If I have not as yet met you, I look forward to doing so.

Phone 306-979-4000 • Fax 306-979-4904

Toll Free 877-979-4990• Cell 306-531-9449

Micks. saskatchewan

hi, my name is cLauDIo GorSeDIn. I have 22 years experience selling industrial power tools in calgary and am very pleased to be able to share my experience with the customers of canadian Woodworker. I promise to bring my hard work ethic, professionalism, and knowledge to my new customers as well as invite my past customers to come down and visit me in my new roll. Store manager Wayne maron has asked me to be the in store contact person for all of our educational and industrial customers, and I look forward to be of service. We have many new product lines on the shelves in addition to our outstanding line up of tool brands to assist you on all your woodworking needs.

Phone 403-255-8743• Fax 403-255-8753

Toll Free 1-877-255-8743

ClaudioCalgary

13

LaGuna TooLSNOW at Canadian Woodworker

Laguna 3mm Gluepot edgebander 1 Phase • Reg. $18,995.00 $17,995.00The Laguna Bandit 2/3 sets the new standard for compact edgebanders. It provides rapid, reliable production with a smaller footprint than full-sized edgebanders. Great for the small shop it has single phase power, 3mm PVC and strip capacity, and built in castors for mobility.This machine uses the same heavy-duty internal components found in our larger, full-function edgebanders for maximum reliability. The micro-adjustable gluepot allows for precision control of glue application while the automatic end and edgetrimming units trim all four sides in a single pass. This is the perfect machine to increase your production and profits.

Laguna 8mm Gluepot edgebander 3 Phase • Reg. $37,995.00 $34,995.00 The NEW Laguna Bandit 4/8 is the new heavyweight in their line of automatic edgebanders. This machine has the capacity to handle up to 8mm edgebanding as well as individual laminate strips. The gluepot allows for maximum flexibility for use with PVC, wood tape, laminate and wood strips. Standard features include automatic end trim with dual blade end cutting units, edge trimming with dual high frequency motors, scraping unit, buffing unit, adjustable overhead control panel, pull out support rollers for wide panels, and electronic temperature control with digital readout.

Laguna 10' Panelsaw 7.5 hp 3 Phase • Reg. $14,995.00 $13,995.00The C45 Panel Saw features a massive 10.5 foot anodized precision sliding table. The ergonomic design of this saw includes tilted control panel and tilted scales on the cross cut fence for ease of use. The 7.5 HP Baldor main motor provides plenty of power for the toughest of jobs and is equipped with automatic star-delta start. The scoring unit features a separate motor and external controls for quick set up. Standard features include micro-adjustable rip fence, parallelogram blade guard, mitering crosscut fence, and motorized raising and lowering of the main blade. w

ww

.can

adia

nwoo

dwor

ker.

com

14

15

Laguna 2 hp Portable cyclone Dust collector w/remote Start • Reg.$2,195.00 $1,995.00

Laguna 3hp Portable cyclone Dust collector w/remote Start • Reg. $2,495.00 $2,395.00

The Laguna Mobile Cyclone Dust Collectors with remote start/stop offer the benefits of a cyclone and the portability needed for workshops of all sizes. The cyclone collection unit allows the wood particles and dust to be separated from the air stream before going to the pleated cartridge filter. This provides superior dust collection and air filtration so that the wood particles do not pass through the efficient fan unit. Dust is collected in a 29 gallon metal collection drum which features quick release and separate wheels for quick and easy emptying. Motorized automatic filter cleaning insures that the pleated filter is always ready for the next use of the machine and remains in top shape. The convenient remote control included with this machine allows you to start the machine from anywhere in the shop saving you time and steps. Industrial casters allow it to move easily around your shop. This machine is also very quite, protecting your ears as well as your lungs.

Laguna 14" 3hp Deluxe Bandsaw • Reg. $1,899.95 $1,799.95

Laguna has used their 25 years of experience, knowledge and continuous innovation to bring you this latest 14" bandsaw, the LT 14 SUV. Offering a full 14" of resaw capacity—more than any other 14" bandsaw—and loaded with features such as the proven Laguna Tools guides, 3 HP Leeson motor, rack and pinion controls, cast iron table, quick release blade and foot brake with micro-switch for extra safety and convenience.

Laguna 16" 3 hp Deluxe Bandsaw • Reg. $2,295.00 $2,195.00

Laguna's award-winning LT16-3000 bandsaw just got better by incorporating features from their Heavy-Duty series bandsaws. The long list of standard features now includes foot brake with micro-switch, rack and pinion for the upper guidepost, geared trunions with gas spring, quick tension release, and aluminum Laguna Guides. This new version features a 3 HP Leeson motor for plenty of power when resawing. The cast iron trunions, table, and wheels provide the stability needed to accurately slice wafer thin veneers from a tall block of hard-wood. The award winning Laguna Guides insure positive control and tracking for your blades while the dual 4" dust ports provide optimum dust control.

Laguna 18" 4 hp Deluxe Bandsaw • Reg. $2,595.00 $2,495.00

The LT18 3000 series is the new "Senior" member of Laguna's best selling 3000 series. This new saw provides a perfect balance between very large capacities and price. With 16" of resaw capacity and a maximum blade width of 1" it is powered by a 4HP TEFC motor and will handle almost every job a typical custom woodworking shop will encounter. Some of the features are a blade tension mechanism with quick release, foot brake with micro-switch for convenience and safety, 2 dust ports, and a unique rack and pinion tilt system to tilt the table which is counter balanced with a gas spring.

Laguna 10' Panelsaw 5.5hp 1 Phase • Reg. $12,495.00 $11,995.00

The P32 Panel Saw features a massive 15" x 10.5' anodized precision sliding table. The ergonomic design of this saw includes digital display for the tilting/angle scales and LED RPM.The 5 HP single phase 220 volt main motor provides plenty of power for the tough-est of jobs and is equipped with start/stop switches right on the end of the sliding table. The scoring unit features a separate 3/4 hp motor and external controls for quick set up. Standard features include micro-adjustable rip fence, deluxe blade guard, and mitering crosscut fence.

Laguna cnc 3 axis Panel Saw 7.5 hp 3 Phase • Reg. $29,995.00 $28,995.00

Laguna 10' Digital Panelsaw 7.5hp 3 Phase • Reg. $14,995.00 $13,995.00

The P3200-TA Panel Saw features a massive 15" x 10.5 foot anodized precision sliding table. The ergonomic design of this saw includes digital readouts for RPM and blade angles, digital blade tilting adjustment, and motorized adjustment of both the main blade and scoring blade. The 7.5 HP main motor provides plenty of power for the toughest of jobs and the scoring unit features a 1 hp separate motor and external controls for quick set up. Standard features include micro-adjustable rip fence, miter fence, parallelogram blade guard, and crosscut table with digital stop.

Laguna 5' Sliding Panelsaw 4hp 1 Phase • Reg. $6,995.00 $6,495.00

Laguna 8' Sliding Panelsaw 4 hp 1 Phase • Reg. $9,495.00 $8,795.00The all-new Laguna Pro-Series sliding panelsaws feature heavy-duty cast-iron internal components for rock solid performance. The 14" wide precision sliding table is anodized for durability and features a rugged support table and a telescoping crosscut fence with dual flip-stops. The crosscut table sports a roller and is supported by a large swing-arm and is ideal for sheet goods. On and off switches for the motor are conveniently located in the handle of the siding table so you never have to reach under the panel again. The standard 4 HP single phase motor provides plenty of power for the toughest of jobs while the scoring blade is powered by a separate motor. Our Euro-style slider, riving knife, and micro-adjustable rip fence system provide safety and precision for flawless cuts every time. The 5' saw has a crosscut capacity of 67" and the 8' will crosscut up to 106" panels.

*

$5beaver bucks

beaver bucks

$5This voucher entitles you to $5.00 off any purchase of $25.00 or more. Limit one coupon per customer. Valid in Winnipeg & Edmonton Nov. 13th–15th 2009

and in Calgary & Saskatoon Nov. 20th-22nd 2009 ONLY. Not applicable to books or magazines. Not valid with any other promotion

visit our brand new website to get more information on all of our tools…

S A S K A T O O N W I N N I P E G4 – 805 Circle Drive Saskatoon, SK S7K 3S4

T: 306-979-4000 • F: 306-979-4904 • TF: 877-979-4990 E-mail: [email protected]

4920 99th Street N.W. Edmonton, AB T6E 3N6T: 780-702-3000 • F: 780-702-0373 • TF: 877-711-3001

E-mail: [email protected]

1054 Portage Avenue, Winnipeg MB R3G 0S3T: 204-786-3196 • F: 204-783-6867 • TF: 800-665-2244

E-mail: [email protected]

105E – 58th Avenue SE, Calgary, AB T2H 0N8T: 403-255-8743 • F: 403-255-8753 • TF: 877-255-8743

E-mail: [email protected]

E D M O N T O N C A L G A R Y

you are formally invited to attend our

anniversary celebration