ITH Supporting document bolt connection Print no. : 09.00616b-EN Page : 1/1 www.ith.com E-Mail: [email protected] Tel.: +49/(0)291/9962-0 Bolting Technology ITH Supporting document bolt connection ITH GmbH & Co. KG Technical Sales Steinwiese 8 D-59872 Meschede 1. Address Company _______________________________ Street address _______________________________ Postal code, City _______________________________ Country _______________________________ Name of contact person _______________________________ Telephone number _______________________________ Mobile phone number _______________________________ E-Mail address _______________________________ Phone: +49 (0)291/9962-0 Fax: +49 (0)291/9962-11 E-mail: [email protected] www.ITH.de 3. form | form by e-mail to ITH A. General data Application area bolt tensioning cylinder Possible particular specification (operating conditions, temperature, assembling from the bottom etc.) Quantity of the required bolt tensioning cylinders (Multi-Tensioning) B. Bolt Nominal diameter x pitch d x P [mm] Bolt length (total) l 1 [mm] Thread projection above nut h 2 [mm] A/F height h 8 [mm] Shaft diameter d s [mm] Bolt material C. Nut Across corners dimension e [mm] Width across flats s [mm] Nut diameter d 8 [mm] Nut height (total) h 1 [mm] Adjusting hole height h 5 [mm] Adjusting hole diameter d 10 [mm] Quantity of bores m D. Washer Outside diameter washer d 6 [mm] Inside diameter washer d 7 [mm] Washer thickness h S [mm] E. Application characteristics Installation situation axial h e [mm] Flange radius r 1 [mm] Length bolt center to flange outer edge l 7 [mm] Length bolt center to flange radius l 8 [mm] installation situation radial l e [mm] Pitch diameter d t [mm] Quantity of bolts n [mm] Bolt spacing t [mm] Assembly preload per bolt F M [kN] Max. surface pressure of flange material p zul. [kN] Other data on thread (e.g. standards + tolerance class) 2. Technical data ITH would like to offer you the best possible support to find the right bolting tool or to design bolt connections. Therefore please fill out this form by clicking on the fields (if the data is available) and send it back to ITH via e-mail. Contact us with any questions regarding your bolting application – we offer a free-of-charge technical consultation and on site inspection. h e d x P d 8 h 8 h 2 h 1 l 1 h S h 5 d 10 d S l 7 l 8 l e t d t e s (A/F)