Top Banner
Items USB TV tuner Installation Guides ITV704 USB TV Tuner FM/ ITV705 IPTV Step1. Please check the package contents USB TV package contains the following items. Step 2 Begin connecting TV tuner . Step 2.1 Connect your USB cable to high-speed USB port of your PC Note 1 Some may change the contents depending on the packaging information.
9

Items USB TV tuner Installation Guides

Aug 08, 2015

Download

Technology

RockyS11
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Items USB TV tuner Installation Guides

Items USB TV tuner Installation Guides

ITV704 USB TV Tuner FM/ ITV705 IPTV

Step1. Please check the package contents

USB TV package contains the following items.

Step 2 Begin connecting TV tuner .

Step 2.1 Connect your USB cable to high-speed USB port of your PC

Note 1Some may change the contents depending on the packaging information.

Page 2: Items USB TV tuner Installation Guides

Step 2.2

Connect the other end to the USB port of TV Tuner

Note 2:USB ports can also supply poweracross the cable to TV tuner.

Page 3: Items USB TV tuner Installation Guides

Step 3 Begin connecting related input and output

IEC-type TV connector is for PAL/SECAM or DVB-T signal.

The type of connector is determined by the area in which you live.

Step 3.1 Connect your TV cable to TV port

Page 4: Items USB TV tuner Installation Guides

FM Antenna

Step 3.2 connect FM Antenna to FM port

Page 5: Items USB TV tuner Installation Guides

Step 4 Install the software

Step 4.1 Reboot the PC to start your system after installing your tuner.Please open the CD-ROM drive to install your software. (See Note 3)

Step 4.2

Insert the installation CD into your CD-ROM drive.

Note 3If previous version software is installed on your PC, please uninstall it.

Page 6: Items USB TV tuner Installation Guides

step 4.3

please close the CD-ROM drive and in a few seconds it should run

Setup program. (See Note 4)

Step 4.4

The installation screen appears and pleases clicks “Allow” to

continue installation.

Note 4If your CD-ROM drive does not automatically start the Setup programPlease go to My Computer→CD-ROM drive and click the Program Setup.exe.

Page 7: Items USB TV tuner Installation Guides

step 5

Remove the battery compartment door and Insert two (2) AAA size

batteries into the battery compartment. (See Note 5)

step 5.1

Point the remote controller toward the device receiving the infrared

signal and press the power key. ( see Note 6)

Note 5:Be sure to observe the polarity markings fixed inside the battery compartment. If the batteries are inserted incorrectly, the remote control will not operate.Caution:Make sure you correctly align positive (+) and negative (-) terminals on the batteries.

Page 8: Items USB TV tuner Installation Guides

Step 5.2

If you want further information for our products, please visit our

technical support page on our website:

http://www.itemstech.com.tw/html/help/howto.html

Want to know more details? Please visit the new version website:

http://www.itemstech.com.tw/html/products/usb/usb.html

About Items technology Co,LTD

Items is the experienced and global multimedia solution provider since 1998 based in

Taiwan. We position ourselves as “entertainment providers” to bring fun for all ages.

Over the past 11 years, Items TV tuners have received high praise and recognition in

multimedia field and always stay ahead of the competition and possess the cutting-edge

technologies.

Pls. visit the new version website: http://www.itemstech.com.tw/ to

know more information or email to: [email protected] ,

[email protected] )

Note 6 Be sure that no obstructions stand in the way of the infrared receiver, as signal may be interrupted and the infrared receiver may fail to receive the Infrared Signal from the remote control.